Updated Read Me for changes made for Big Sur
This commit is contained in:
@@ -1,5 +1,5 @@
|
||||
# Lenovo Thinkpad T450 & T450s Hackintosh Guide for Catalina with Opencore
|
||||
This repo contains the installation guide and EFI files required to get a perfectly functional Catalina 10.15.7 hackintosh on your T450 or T450s since they share the same hardware. Everything is stable and functional as described in this Readme.
|
||||
This repo contains the installation guide and EFI files required to get a perfectly functional Big Sur Public Release, Catalina and Mojave hackintosh on your T450 or T450s since they share the same hardware. Everything is stable and functional as described in this Readme.
|
||||
|
||||
## A few worthy mentions about this repo:
|
||||
|
||||
@@ -7,10 +7,11 @@ This repo contains the installation guide and EFI files required to get a perfec
|
||||
- **The EFI folder and the patched ACPI were first created by [EchoEspirit](https://github.com/EchoEsprit/Hackintosh-Catalina-OpenCore-Lenovo-T450s-efi) and futher optimized by [i3p9](https://github.com/i3p9/Hackintosh-Catalina-OpenCore-Lenovo-T450s-efi). I tweaked a couple of things and fixed some errors that were happening on T450 + added Intel WiFi drivers from [Openintelwireless](https://github.com/OpenIntelWireless)**
|
||||
- **I will try my best to keep the repo updated with the latest kexts and Opencore version**
|
||||
- **This EFI works with Big Sur Public Release (11.0.1), Catalina and Mojave**
|
||||
- **This EFI is Configured with Big Sur in mind. If you are using it on Catalina or Mojave read the the whole guide to know where to make the necessary changes**
|
||||
|
||||
  
|
||||
  
|
||||
|
||||

|
||||

|
||||
|
||||
# Introduction
|
||||
|
||||
@@ -38,7 +39,7 @@ EFI folder and Guide for Thinkpad T450 and T450s Hackintosh Catalina.
|
||||
# What works
|
||||
|
||||
- Sleep / Wake
|
||||
- Wifi and Bluetooth (Built-in Intel 7265 or 7260 cards with Heliport + itlwm.kext) **Airportitlwm.kext is not recommended, it causes issues with Trackpad after wake from sleep {See on Post Install}**
|
||||
- Wifi and Bluetooth (Built-in Intel 7265 or 7260 cards with Airportitlwm.kext) **itlwm.kext is recommended for those on Catalina because Airportitlwm causes issues with Trackpad after wake from sleep {See on Post Install}**
|
||||
- AirPort Extreme (Broadcom BCM94360CSAX & NGFF A/E Adapter) **Recommended Upgrade to get native WiFi & Bluetooth**
|
||||
- Handoff, Continuity, AirDrop
|
||||
- iMessage, FaceTime, App Store, iTunes Store (Change Config.plist -> PlatformInfo -> Generic -> MLB and SystemSerialNumber)
|
||||
@@ -57,7 +58,7 @@ EFI folder and Guide for Thinkpad T450 and T450s Hackintosh Catalina.
|
||||
|
||||
- VGA
|
||||
- Sidecar (Wired Sidecar works but only in Macbook9,1 SMBIOS, which has bad battery life, you can choose what you want)
|
||||
- With the IntelBluetoothFirmware.kext and itlwm.kext enabled Bluetooth headphones only work when you are not connected to any wifi network or turn off wifi. This is a known issue with 7265 and 7260 cards. You can get 8x series cards to fix this or buy the recomended cards (DW1820A 00JT494 or Broadcom BCM94360CSAX)
|
||||
- With the IntelBluetoothFirmware.kext and Airportitlwm.kext or itlwm.kext enabled Bluetooth headphones only work when you are not connected to any wifi network or turn off wifi. This is a known issue with 7265 and 7260 cards. You can get 8x series cards to fix this or buy the recomended cards (DW1820A 00JT494 or Broadcom BCM94360CSAX)
|
||||
|
||||
## Note: If you need to edit config.plist, don't use OpenCore configurator or Clover configurator, use PlistEdit pro (Included in Utilities) or Xcode.
|
||||
|
||||
@@ -65,6 +66,10 @@ EFI folder and Guide for Thinkpad T450 and T450s Hackintosh Catalina.
|
||||
|
||||
**COMING SOON**
|
||||
|
||||
For the mean time follow the [Dortania Installation Guide](https://dortania.github.io/OpenCore-Install-Guide/installer-guide/) but replace the whole OC and BOOT folders in EFI with the ones in this repo.
|
||||
|
||||
**Note: If you are installing Catalina or Mojave it is important that you disable Airportitlwm.kext in Kernel/Add/20 of Config.plist and enable itlwm.kext instead. Read Post Install #4.**
|
||||
|
||||
# Post Install
|
||||
Once you have verifed that your machine boots properly without any issues as described in the "What Works section", proceed to do the following
|
||||
|
||||
@@ -76,14 +81,18 @@ In the config.plist, naviaget to Misc -> Debug and change both AppleDebug and Ap
|
||||
|
||||
You can also disable the boot picker screen so that you boot straight to th Apple logo by setting ShowPicker under Misc -> Boot to False (NO)
|
||||
|
||||
### 3. Enable native WiFi with the Intel card
|
||||
You can enable native WiFi on the Intel card by navigating (in config.plist) to Kernel -> Add -> 20 and set Enabled to True/YES (Enabling Airportitlwm.kext) and in 21 set Enabled to False/NO (Disabling itlwm.kext).
|
||||
### 3. Enable WiFi with the Intel card on Catalina and Mojave
|
||||
If you are on Catalina or Mojave, you can enable WiFi on the Intel card by navigating (in config.plist) to Kernel -> Add -> 20 and set Enabled to False/NO (Disabling Airportitlwm.kext) and in 21 set Enabled to True/YES (Enabling itlwm.kext). After enabling these and rebooting install Heliport App (included in Utilities).
|
||||
|
||||
Or you can use Airportitlwm.kext for Catalina from Intel WiFi Kexts folder and get native wifi on Catalina in the expense of loosing trackpad after wake from sleep.
|
||||
|
||||
**For those on Big Sur you can comfortably use the Airportitlwm.kext included as the trackpad issues after sleep do not happen on Big Sur.**
|
||||
|
||||
**Note:**
|
||||
|
||||
**1. This kext gives you native WiFi menu and enables location services, but often causes issues with the trackpad & trackpoint after waking from sleep (it doesn't work). A quick fix is to put the laptop to sleep again by closing the lid until the red sleep light starts to blink then waking the laptop again. Also it only happens when you put the laptop to sleep for a very long time (more than 2 or 3 hours). So for those who don't put their laptop to sleep for a very long time and just turn it off after use, this kext is ok to use.**
|
||||
**1. Airportitlwm.kext gives you native WiFi menu and enables location services, but often causes issues with the trackpad & trackpoint after waking from sleep (it doesn't work) on Catalina and Mojave (not Big Sur). A quick fix is to put the laptop to sleep again by closing the lid until the red sleep light starts to blink then waking the laptop again. Also it only happens when you put the laptop to sleep for a very long time (more than 2 or 3 hours). So for those who don't put their laptop to sleep for a very long time and just turn it off after use, this kext is ok to use.**
|
||||
|
||||
**2. The kext included in this EFI is only for Catalina. For those in Big Sur you should download the corresponding Airportitlwm.kext from [Openintelwireless](https://github.com/OpenIntelWireless) for Big Sur or the one in Intel WiFi Kexts (Recommended) and replace the one in EFI -> Kexts.**
|
||||
**2. The Airportitlwm.kext included in this EFI is only for Big Sur. For those in Catalina or Mojave you should download the corresponding Airportitlwm.kext from [Openintelwireless](https://github.com/OpenIntelWireless) or use the one in Intel WiFi Kexts Folder of this repo (Recommended) and replace the one in EFI -> Kexts.**
|
||||
|
||||
### 4. Add Device Properties for Serial number and other info
|
||||
Follow this [guide](https://dortania.github.io/OpenCore-Post-Install/universal/iservices.html#generate-a-new-serial) to set up serial number and the accompanying info to get iServices
|
||||
|
||||
Reference in New Issue
Block a user