From faba4a8f3a4819b881177a8aa1efed27e4656422 Mon Sep 17 00:00:00 2001 From: e5l Date: Wed, 13 Jul 2016 13:20:02 +0300 Subject: [PATCH] car_llvmkot: port car_fmw to link with kotlin llvm --- car_llvmkot/.gitignore | 2 + car_llvmkot/Makefile | 90 + car_llvmkot/Makefile.bak | 82 + car_llvmkot/src/assert.c | 20 + car_llvmkot/src/car_engine.h | 79 + car_llvmkot/src/car_leds.h | 31 + car_llvmkot/src/car_user_btn.h | 26 + car_llvmkot/src/kotlin_main.ll | 6 + car_llvmkot/src/lib/cmsis/Makefile | 15 + car_llvmkot/src/lib/cmsis/arm_common_tables.h | 35 + car_llvmkot/src/lib/cmsis/arm_math.h | 7051 +++++++++++++++++ car_llvmkot/src/lib/cmsis/core_cm0.h | 665 ++ car_llvmkot/src/lib/cmsis/core_cm3.h | 1236 +++ car_llvmkot/src/lib/cmsis/core_cm4.h | 1378 ++++ car_llvmkot/src/lib/cmsis/core_cm4_simd.h | 701 ++ car_llvmkot/src/lib/cmsis/core_cmFunc.h | 609 ++ car_llvmkot/src/lib/cmsis/core_cmInstr.h | 585 ++ car_llvmkot/src/lib/cmsis/startup_stm32f4xx.s | 509 ++ car_llvmkot/src/lib/cmsis/stm32f4xx.h | 7004 ++++++++++++++++ car_llvmkot/src/lib/cmsis/system_stm32f4xx.c | 553 ++ car_llvmkot/src/lib/cmsis/system_stm32f4xx.h | 99 + car_llvmkot/src/lib/stdperiph/Makefile | 9 + car_llvmkot/src/lib/stdperiph/misc.c | 244 + car_llvmkot/src/lib/stdperiph/misc.h | 172 + car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.c | 1743 ++++ car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.h | 643 ++ car_llvmkot/src/lib/stdperiph/stm32f4xx_can.c | 1699 ++++ car_llvmkot/src/lib/stdperiph/stm32f4xx_can.h | 638 ++ car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.c | 127 + car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.h | 77 + .../src/lib/stdperiph/stm32f4xx_cryp.c | 851 ++ .../src/lib/stdperiph/stm32f4xx_cryp.h | 338 + .../src/lib/stdperiph/stm32f4xx_cryp_aes.c | 638 ++ .../src/lib/stdperiph/stm32f4xx_cryp_des.c | 291 + .../src/lib/stdperiph/stm32f4xx_cryp_tdes.c | 308 + car_llvmkot/src/lib/stdperiph/stm32f4xx_dac.c | 702 ++ car_llvmkot/src/lib/stdperiph/stm32f4xx_dac.h | 298 + .../src/lib/stdperiph/stm32f4xx_dbgmcu.c | 175 + .../src/lib/stdperiph/stm32f4xx_dbgmcu.h | 103 + .../src/lib/stdperiph/stm32f4xx_dcmi.c | 535 ++ .../src/lib/stdperiph/stm32f4xx_dcmi.h | 306 + car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.c | 1284 +++ car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.h | 603 ++ .../src/lib/stdperiph/stm32f4xx_exti.c | 307 + .../src/lib/stdperiph/stm32f4xx_exti.h | 177 + .../src/lib/stdperiph/stm32f4xx_flash.c | 1057 +++ .../src/lib/stdperiph/stm32f4xx_flash.h | 334 + .../src/lib/stdperiph/stm32f4xx_fsmc.c | 983 +++ .../src/lib/stdperiph/stm32f4xx_fsmc.h | 669 ++ .../src/lib/stdperiph/stm32f4xx_gpio.c | 562 ++ .../src/lib/stdperiph/stm32f4xx_gpio.h | 406 + .../src/lib/stdperiph/stm32f4xx_hash.c | 701 ++ .../src/lib/stdperiph/stm32f4xx_hash.h | 244 + .../src/lib/stdperiph/stm32f4xx_hash_md5.c | 314 + .../src/lib/stdperiph/stm32f4xx_hash_sha1.c | 317 + car_llvmkot/src/lib/stdperiph/stm32f4xx_i2c.c | 1396 ++++ car_llvmkot/src/lib/stdperiph/stm32f4xx_i2c.h | 692 ++ .../src/lib/stdperiph/stm32f4xx_iwdg.c | 264 + .../src/lib/stdperiph/stm32f4xx_iwdg.h | 125 + car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.c | 657 ++ car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.h | 179 + car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.c | 1809 +++++ car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.h | 510 ++ car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.c | 400 + car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.h | 114 + car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.c | 2733 +++++++ car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.h | 875 ++ .../src/lib/stdperiph/stm32f4xx_sdio.c | 1005 +++ .../src/lib/stdperiph/stm32f4xx_sdio.h | 530 ++ car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.c | 1287 +++ car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.h | 537 ++ .../src/lib/stdperiph/stm32f4xx_syscfg.c | 198 + .../src/lib/stdperiph/stm32f4xx_syscfg.h | 173 + car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.c | 3353 ++++++++ car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.h | 1144 +++ .../src/lib/stdperiph/stm32f4xx_usart.c | 1464 ++++ .../src/lib/stdperiph/stm32f4xx_usart.h | 423 + .../src/lib/stdperiph/stm32f4xx_wwdg.c | 304 + .../src/lib/stdperiph/stm32f4xx_wwdg.h | 105 + ...ge SW License Agreement 19Jul2011 v0.1.pdf | Bin 0 -> 129125 bytes car_llvmkot/src/lib/stm32f4d/Makefile | 9 + .../src/lib/stm32f4d/Release_Notes.html | 142 + .../src/lib/stm32f4d/libPDMFilter_GCC.a | Bin 0 -> 6956 bytes .../src/lib/stm32f4d/libPDMFilter_IAR.a | Bin 0 -> 8880 bytes .../src/lib/stm32f4d/libPDMFilter_Keil.lib | Bin 0 -> 6476 bytes car_llvmkot/src/lib/stm32f4d/pdm_filter.h | 66 + .../src/lib/stm32f4d/stm32f4_discovery.c | 253 + .../src/lib/stm32f4d/stm32f4_discovery.h | 163 + .../stm32f4d/stm32f4_discovery_audio_codec.c | 1650 ++++ .../stm32f4d/stm32f4_discovery_audio_codec.h | 306 + .../lib/stm32f4d/stm32f4_discovery_lis302dl.c | 502 ++ .../lib/stm32f4d/stm32f4_discovery_lis302dl.h | 772 ++ car_llvmkot/src/main.c | 5 + car_llvmkot/src/stm32_flash.ld | 177 + car_llvmkot/src/stm32f4xx_conf.h | 94 + car_llvmkot/src/stm32f4xx_it.c | 167 + car_llvmkot/src/stm32f4xx_it.h | 54 + car_llvmkot/src/wait.h | 6 + 98 files changed, 63274 insertions(+) create mode 100644 car_llvmkot/.gitignore create mode 100644 car_llvmkot/Makefile create mode 100644 car_llvmkot/Makefile.bak create mode 100644 car_llvmkot/src/assert.c create mode 100644 car_llvmkot/src/car_engine.h create mode 100644 car_llvmkot/src/car_leds.h create mode 100644 car_llvmkot/src/car_user_btn.h create mode 100644 car_llvmkot/src/kotlin_main.ll create mode 100644 car_llvmkot/src/lib/cmsis/Makefile create mode 100644 car_llvmkot/src/lib/cmsis/arm_common_tables.h create mode 100644 car_llvmkot/src/lib/cmsis/arm_math.h create mode 100644 car_llvmkot/src/lib/cmsis/core_cm0.h create mode 100644 car_llvmkot/src/lib/cmsis/core_cm3.h create mode 100644 car_llvmkot/src/lib/cmsis/core_cm4.h create mode 100644 car_llvmkot/src/lib/cmsis/core_cm4_simd.h create mode 100644 car_llvmkot/src/lib/cmsis/core_cmFunc.h create mode 100644 car_llvmkot/src/lib/cmsis/core_cmInstr.h create mode 100644 car_llvmkot/src/lib/cmsis/startup_stm32f4xx.s create mode 100644 car_llvmkot/src/lib/cmsis/stm32f4xx.h create mode 100644 car_llvmkot/src/lib/cmsis/system_stm32f4xx.c create mode 100644 car_llvmkot/src/lib/cmsis/system_stm32f4xx.h create mode 100644 car_llvmkot/src/lib/stdperiph/Makefile create mode 100644 car_llvmkot/src/lib/stdperiph/misc.c create mode 100644 car_llvmkot/src/lib/stdperiph/misc.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_can.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_can.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp_aes.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp_des.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp_tdes.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_dac.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_dac.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_dbgmcu.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_dbgmcu.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_dcmi.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_dcmi.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_exti.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_exti.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_flash.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_flash.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_fsmc.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_fsmc.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_gpio.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_gpio.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_hash.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_hash.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_hash_md5.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_hash_sha1.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_i2c.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_i2c.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_iwdg.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_iwdg.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_sdio.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_sdio.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_syscfg.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_syscfg.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_usart.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_usart.h create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_wwdg.c create mode 100644 car_llvmkot/src/lib/stdperiph/stm32f4xx_wwdg.h create mode 100644 car_llvmkot/src/lib/stm32f4d/MCD-ST Image SW License Agreement 19Jul2011 v0.1.pdf create mode 100644 car_llvmkot/src/lib/stm32f4d/Makefile create mode 100644 car_llvmkot/src/lib/stm32f4d/Release_Notes.html create mode 100644 car_llvmkot/src/lib/stm32f4d/libPDMFilter_GCC.a create mode 100644 car_llvmkot/src/lib/stm32f4d/libPDMFilter_IAR.a create mode 100644 car_llvmkot/src/lib/stm32f4d/libPDMFilter_Keil.lib create mode 100644 car_llvmkot/src/lib/stm32f4d/pdm_filter.h create mode 100644 car_llvmkot/src/lib/stm32f4d/stm32f4_discovery.c create mode 100644 car_llvmkot/src/lib/stm32f4d/stm32f4_discovery.h create mode 100644 car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_audio_codec.c create mode 100644 car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_audio_codec.h create mode 100644 car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_lis302dl.c create mode 100644 car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_lis302dl.h create mode 100644 car_llvmkot/src/main.c create mode 100644 car_llvmkot/src/stm32_flash.ld create mode 100644 car_llvmkot/src/stm32f4xx_conf.h create mode 100644 car_llvmkot/src/stm32f4xx_it.c create mode 100644 car_llvmkot/src/stm32f4xx_it.h create mode 100644 car_llvmkot/src/wait.h diff --git a/car_llvmkot/.gitignore b/car_llvmkot/.gitignore new file mode 100644 index 00000000000..7fcd950a051 --- /dev/null +++ b/car_llvmkot/.gitignore @@ -0,0 +1,2 @@ +bin +tags diff --git a/car_llvmkot/Makefile b/car_llvmkot/Makefile new file mode 100644 index 00000000000..d94651dfd7d --- /dev/null +++ b/car_llvmkot/Makefile @@ -0,0 +1,90 @@ +BIN_DIR=$(PWD)/bin +SRC_DIR=$(PWD)/src +LIB_DIR=$(SRC_DIR)/lib +OS_ARCH=linux-arm + +LIB_CMSIS_DIR=$(LIB_DIR)/cmsis +LIB_STDPERIPH_DIR=$(LIB_DIR)/stdperiph +LIB_STM32F4D_DIR=$(LIB_DIR)/stm32f4d + +LIB_CMSIS_OBJ=$(BIN_DIR)/libcmsis.o +LIB_STDPERIPH_OBJ=$(BIN_DIR)/libstdperiph.o +LIB_STM32F4D_OBJ=$(BIN_DIR)/libstm32f4d.o +CAR_FMW_OBJ=$(BIN_DIR)/car_fmw.o +CAR_FMW_ELF=$(BIN_DIR)/car_fmw.elf +CAR_FMW_BIN=$(BIN_DIR)/car_fmw.bin +ST_DIR=$(SRC_DIR)/../../devloader/data/$(OS_ARCH) + +LIB_KOTLIN=$(BIN_DIR)/kotlib.o + +CC=arm-none-eabi-gcc +AS=arm-none-eabi-as +LD=arm-none-eabi-ld +LL=llc +OBJ_COPY=arm-none-eabi-objcopy +GDB=arm-none-eabi-gdb + +INCLUDES=-I$(LIB_CMSIS_DIR) \ + -I$(LIB_STDPERIPH_DIR) \ + -I$(LIB_STM32F4D_DIR) \ + -I$(SRC_DIR) +DEFINES=-DUSE_STM32_DISCOVERY=1 -DUSE_STDPERIPH_DRIVER=1 -DSTM32F4XX=1 -DHSE_VALUE=8000000 +CFLAGS=-g -nostdlib -ffreestanding -O0 \ + -mcpu=cortex-m3 -mfloat-abi=soft -mthumb \ + $(DEFINES) +LLFLAGS=-march=thumb -mtriple=arm-none-eabi -mcpu=cortex-m3 +ASMFLAGS=-g -mthumb + +LD_ALL_DEPS=$(LD) -r $(filter %.o,$^) -o $@ +CC_ALL_DEPS=$(CC) $(CFLAGS) -c $(INCLUDES) $(filter %.c,$^) -o $@ +AS_ALL_DEPS=$(AS) $(ASMFLAGS) $(filter %.s,$^) -o $@ +LL_ALL_DEPS=$(LL) $(LLFLAGS) $(filter %.ll, $^) -o $@ + +dirhs=$(wildcard $(1)/*.h) +dircs=$(wildcard $(1)/*.c) +dircs_to_prefxd_objs=\ + $(patsubst $(1)/%.c,$(BIN_DIR)/$(2)%.o,$(call dircs,$1)) + +$(CAR_FMW_BIN): $(CAR_FMW_ELF) $(BIN_DIR) + $(OBJ_COPY) -O binary $< $@ + +$(CAR_FMW_ELF): $(CAR_FMW_OBJ) $(LIB_STM32F4D_OBJ) \ + $(LIB_CMSIS_OBJ) $(LIB_STDPERIPH_OBJ) $(LIB_KOTLIN) + $(CC) $(CFLAGS) $^ -T $(SRC_DIR)/stm32_flash.ld -o $@ + +CAR_OBJ_PREFIX=car_ +$(CAR_FMW_OBJ): \ + $(call dircs_to_prefxd_objs,$(SRC_DIR),$(CAR_OBJ_PREFIX)) + $(LD_ALL_DEPS) + +$(BIN_DIR)/$(CAR_OBJ_PREFIX)%.o: $(SRC_DIR)/%.c \ + $(call dirhs,$(SRC_DIR)) + $(CC_ALL_DEPS) + +$(LIB_KOTLIN): $(BIN_DIR)/kotlin_main.s + $(AS_ALL_DEPS) + +$(BIN_DIR)/kotlin_main.s: $(SRC_DIR)/kotlin_main.ll + $(LL_ALL_DEPS) + +$(BIN_DIR): + mkdir -p $(BIN_DIR) + + +flash: $(CAR_FMW_BIN) + $(ST_DIR)/st-flash write $(CAR_FMW_BIN) 0x8000000 + +debug: + -killall st-util + (setsid $(ST_DIR)/st-util 2>/dev/null 1>&2)& + $(GDB) $(CAR_FMW_ELF) -x $(ST_DIR)/../gdb.cmds + +clean: + rm -rf bin/* + +tags: + ctags -R * + +include $(LIB_DIR)/**/Makefile + +.PHONY: clean debug flash tags diff --git a/car_llvmkot/Makefile.bak b/car_llvmkot/Makefile.bak new file mode 100644 index 00000000000..5383554d6d7 --- /dev/null +++ b/car_llvmkot/Makefile.bak @@ -0,0 +1,82 @@ +BIN_DIR=$(PWD)/bin +SRC_DIR=$(PWD)/src +LIB_DIR=$(SRC_DIR)/lib +OS_ARCH=linux-arm + +LIB_CMSIS_DIR=$(LIB_DIR)/cmsis +LIB_STDPERIPH_DIR=$(LIB_DIR)/stdperiph +LIB_STM32F4D_DIR=$(LIB_DIR)/stm32f4d + +LIB_CMSIS_OBJ=$(BIN_DIR)/libcmsis.o +LIB_STDPERIPH_OBJ=$(BIN_DIR)/libstdperiph.o +LIB_STM32F4D_OBJ=$(BIN_DIR)/libstm32f4d.o +CAR_FMW_OBJ=$(BIN_DIR)/car_fmw.o +CAR_FMW_ELF=$(BIN_DIR)/car_fmw.elf +CAR_FMW_BIN=$(BIN_DIR)/car_fmw.bin +ST_DIR=$(SRC_DIR)/../../devloader/data/$(OS_ARCH) + +LIB_KOTLIN=$(PWD)/bin/kotlib.o + +CC=arm-none-eabi-gcc +AS=arm-none-eabi-as +LD=arm-none-eabi-ld +OBJ_COPY=arm-none-eabi-objcopy +GDB=arm-none-eabi-gdb + +INCLUDES=-I$(LIB_CMSIS_DIR) \ + -I$(LIB_STDPERIPH_DIR) \ + -I$(LIB_STM32F4D_DIR) \ + -I$(SRC_DIR) +DEFINES=-DUSE_STM32_DISCOVERY=1 -DUSE_STDPERIPH_DRIVER=1 -DSTM32F4XX=1 -DHSE_VALUE=8000000 +CFLAGS=-g -nostdlib -ffreestanding -O0 \ + -mcpu=cortex-m3 -mfloat-abi=soft -mthumb \ + $(DEFINES) +ASMFLAGS=-g -mthumb + +LD_ALL_DEPS=$(LD) -r $(filter %.o,$^) -o $@ +CC_ALL_DEPS=$(CC) $(CFLAGS) -c $(INCLUDES) $(filter %.c,$^) -o $@ +AS_ALL_DEPS=$(AS) $(ASMFLAGS) $(filter %.s,$^) -o $@ + +dirhs=$(wildcard $(1)/*.h) +dircs=$(wildcard $(1)/*.c) +dircs_to_prefxd_objs=\ + $(patsubst $(1)/%.c,$(BIN_DIR)/$(2)%.o,$(call dircs,$1)) + +$(CAR_FMW_BIN): $(CAR_FMW_ELF) $(BIN_DIR) + $(OBJ_COPY) -O binary $< $@ + +$(CAR_FMW_ELF): $(CAR_FMW_OBJ) $(LIB_STM32F4D_OBJ) \ + $(LIB_CMSIS_OBJ) $(LIB_STDPERIPH_OBJ) + make -C kotlib + $(CC) $(CFLAGS) $^ $(LIB_KOTLIN) -T $(SRC_DIR)/stm32_flash.ld -o $@ + +CAR_OBJ_PREFIX=car_ +$(CAR_FMW_OBJ): \ + $(call dircs_to_prefxd_objs,$(SRC_DIR),$(CAR_OBJ_PREFIX)) + $(LD_ALL_DEPS) + +$(BIN_DIR)/$(CAR_OBJ_PREFIX)%.o: $(SRC_DIR)/%.c \ + $(call dirhs,$(SRC_DIR)) + $(CC_ALL_DEPS) + +$(BIN_DIR): + mkdir -p $(BIN_DIR) + + +flash: $(CAR_FMW_BIN) + $(ST_DIR)/st-flash write $(CAR_FMW_BIN) 0x8000000 + +debug: + -killall st-util + (setsid $(ST_DIR)/st-util 2>/dev/null 1>&2)& + $(GDB) $(CAR_FMW_ELF) -x $(ST_DIR)/../gdb.cmds + +clean: + rm -rf bin/* + +tags: + ctags -R * + +include $(LIB_DIR)/**/Makefile + +.PHONY: clean debug flash tags diff --git a/car_llvmkot/src/assert.c b/car_llvmkot/src/assert.c new file mode 100644 index 00000000000..43decf8acfd --- /dev/null +++ b/car_llvmkot/src/assert.c @@ -0,0 +1,20 @@ +#include "stm32f4_discovery.h" +#include "stm32f4xx_conf.h" + +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + + /* Infinite loop */ + while (1) + { + } +} diff --git a/car_llvmkot/src/car_engine.h b/car_llvmkot/src/car_engine.h new file mode 100644 index 00000000000..5d92d582be6 --- /dev/null +++ b/car_llvmkot/src/car_engine.h @@ -0,0 +1,79 @@ +#pragma once + +#include "stm32f4_discovery.h" +#include "stm32f4xx_conf.h" + +#define CAR_ENGINE_ENABLE + +#define CAR_ENGINE_GPIO_PORT_CLOCK RCC_AHB1Periph_GPIOB +#define CAR_ENGINE_GPIO_PORT GPIOB +#define CAR_ENGINE_ENABLE_PIN GPIO_Pin_3 +#define CAR_ENGINE_LWHEEL_FWD_PIN GPIO_Pin_4 +#define CAR_ENGINE_LWHEEL_BKWD_PIN GPIO_Pin_5 +#define CAR_ENGINE_RWHEEL_FWD_PIN GPIO_Pin_6 +#define CAR_ENGINE_RWHEEL_BKWD_PIN GPIO_Pin_7 + +inline void engine_init(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + RCC_AHB1PeriphClockCmd(CAR_ENGINE_GPIO_PORT_CLOCK, ENABLE); + GPIO_InitStructure.GPIO_Pin = CAR_ENGINE_ENABLE_PIN + | CAR_ENGINE_LWHEEL_FWD_PIN + | CAR_ENGINE_LWHEEL_BKWD_PIN + | CAR_ENGINE_RWHEEL_FWD_PIN + | CAR_ENGINE_RWHEEL_BKWD_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(CAR_ENGINE_GPIO_PORT, &GPIO_InitStructure); +} + +inline void engine_stop(void) +{ + GPIO_ResetBits(CAR_ENGINE_GPIO_PORT, 0 + | CAR_ENGINE_LWHEEL_BKWD_PIN + | CAR_ENGINE_ENABLE_PIN + | CAR_ENGINE_LWHEEL_FWD_PIN + | CAR_ENGINE_RWHEEL_FWD_PIN + | CAR_ENGINE_RWHEEL_BKWD_PIN); +} + +#ifdef CAR_ENGINE_ENABLE +inline void engine_forward(void) +{ + engine_stop(); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_ENABLE_PIN); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_LWHEEL_FWD_PIN); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_RWHEEL_FWD_PIN); +} + +inline void engine_backward(void) +{ + engine_stop(); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_ENABLE_PIN); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_LWHEEL_BKWD_PIN); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_RWHEEL_BKWD_PIN); +} + +inline void engine_turn_left(void) +{ + engine_stop(); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_ENABLE_PIN); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_LWHEEL_BKWD_PIN); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_RWHEEL_FWD_PIN); +} + +inline void engine_turn_right(void) +{ + engine_stop(); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_ENABLE_PIN); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_LWHEEL_FWD_PIN); + GPIO_SetBits(CAR_ENGINE_GPIO_PORT, CAR_ENGINE_RWHEEL_BKWD_PIN); +} +#else +#define engine_forward(...); +#define engine_backward(...); +#define engine_turn_right(...); +#define engine_turn_left(...); +#endif // CAR_ENGINE_ENABLE diff --git a/car_llvmkot/src/car_leds.h b/car_llvmkot/src/car_leds.h new file mode 100644 index 00000000000..98d12cbe046 --- /dev/null +++ b/car_llvmkot/src/car_leds.h @@ -0,0 +1,31 @@ +#pragma once + +#include + +#include "stm32f4_discovery.h" +#include "stm32f4xx_conf.h" + +inline void leds_init(void) +{ + STM_EVAL_LEDInit(LED4); + STM_EVAL_LEDInit(LED3); + STM_EVAL_LEDInit(LED5); + STM_EVAL_LEDInit(LED6); +} + +typedef enum +{ + LED_GREEN = LED4, + LED_ORANGE = LED3, + LED_RED = LED5, + LED_BLUE = LED6 +} led_t; + +inline void led_set(led_t led, bool on) +{ + if (on) + STM_EVAL_LEDOn(led); + else + STM_EVAL_LEDOff(led); +} + diff --git a/car_llvmkot/src/car_user_btn.h b/car_llvmkot/src/car_user_btn.h new file mode 100644 index 00000000000..79dccf90c89 --- /dev/null +++ b/car_llvmkot/src/car_user_btn.h @@ -0,0 +1,26 @@ +#pragma once + +#include +#include "stm32f4_discovery.h" + +typedef void (*user_btn_handler_t)(void); +static user_btn_handler_t user_btn_handler; + +// @handler can be NULL +inline void user_btn_init(user_btn_handler_t handler) +{ + user_btn_handler = handler; + STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_EXTI); +} + +inline bool user_btn_is_pushed(void) +{ + return STM_EVAL_PBGetState(BUTTON_USER) == Bit_SET; +} + +void EXTI0_IRQHandler(void) +{ + if (user_btn_handler) + user_btn_handler(); + EXTI_ClearITPendingBit(USER_BUTTON_EXTI_LINE); +} diff --git a/car_llvmkot/src/kotlin_main.ll b/car_llvmkot/src/kotlin_main.ll new file mode 100644 index 00000000000..ff02c40a4b0 --- /dev/null +++ b/car_llvmkot/src/kotlin_main.ll @@ -0,0 +1,6 @@ +declare void @llvm.memcpy.p0i8.p0i8.i64(i8* nocapture, i8* nocapture readonly, i64, i32, i1) +attributes #0 = { nounwind "stack-protector-buffer-size"="8" "target-cpu"="cortex-m3" "target-features"="+hwdiv,+strict-align" } +define void @kotlin_main() #0 +{ +ret void +} diff --git a/car_llvmkot/src/lib/cmsis/Makefile b/car_llvmkot/src/lib/cmsis/Makefile new file mode 100644 index 00000000000..3628b8618b1 --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/Makefile @@ -0,0 +1,15 @@ +LIB_CMSIS_OBJ_PREFIX=libcmsis_ + +$(LIB_CMSIS_OBJ): \ + $(call dircs_to_prefxd_objs,$(LIB_CMSIS_DIR),$(LIB_CMSIS_OBJ_PREFIX)) \ + $(BIN_DIR)/$(LIB_CMSIS_OBJ_PREFIX)startup_stm32f4xx.o + $(LD_ALL_DEPS) + +$(BIN_DIR)/$(LIB_CMSIS_OBJ_PREFIX)startup_stm32f4xx.o: \ + $(call dirhs, $(LIB_CMSIS_DIR)) \ + $(LIB_CMSIS_DIR)/startup_stm32f4xx.s + $(AS_ALL_DEPS) + +$(BIN_DIR)/$(LIB_CMSIS_OBJ_PREFIX)%.o: $(LIB_CMSIS_DIR)/%.c \ + $(call dirhs, $(LIB_CMSIS_DIR)) + $(CC_ALL_DEPS) diff --git a/car_llvmkot/src/lib/cmsis/arm_common_tables.h b/car_llvmkot/src/lib/cmsis/arm_common_tables.h new file mode 100644 index 00000000000..34f910f9baf --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/arm_common_tables.h @@ -0,0 +1,35 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010 ARM Limited. All rights reserved. +* +* $Date: 11. November 2010 +* $Revision: V1.0.2 +* +* Project: CMSIS DSP Library +* Title: arm_common_tables.h +* +* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Version 1.0.2 2010/11/11 +* Documentation updated. +* +* Version 1.0.1 2010/10/05 +* Production release and review comments incorporated. +* +* Version 1.0.0 2010/09/20 +* Production release and review comments incorporated. +* -------------------------------------------------------------------- */ + +#ifndef _ARM_COMMON_TABLES_H +#define _ARM_COMMON_TABLES_H + +#include "arm_math.h" + +extern uint16_t armBitRevTable[256]; +extern q15_t armRecipTableQ15[64]; +extern q31_t armRecipTableQ31[64]; +extern const q31_t realCoefAQ31[1024]; +extern const q31_t realCoefBQ31[1024]; + +#endif /* ARM_COMMON_TABLES_H */ diff --git a/car_llvmkot/src/lib/cmsis/arm_math.h b/car_llvmkot/src/lib/cmsis/arm_math.h new file mode 100644 index 00000000000..d8901db155e --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/arm_math.h @@ -0,0 +1,7051 @@ +/* ---------------------------------------------------------------------- + * Copyright (C) 2010 ARM Limited. All rights reserved. + * + * $Date: 15. July 2011 + * $Revision: V1.0.10 + * + * Project: CMSIS DSP Library + * Title: arm_math.h + * + * Description: Public header file for CMSIS DSP Library + * + * Target Processor: Cortex-M4/Cortex-M3/Cortex-M0 + * + * Version 1.0.10 2011/7/15 + * Big Endian support added and Merged M0 and M3/M4 Source code. + * + * Version 1.0.3 2010/11/29 + * Re-organized the CMSIS folders and updated documentation. + * + * Version 1.0.2 2010/11/11 + * Documentation updated. + * + * Version 1.0.1 2010/10/05 + * Production release and review comments incorporated. + * + * Version 1.0.0 2010/09/20 + * Production release and review comments incorporated. + * -------------------------------------------------------------------- */ + +/** + \mainpage CMSIS DSP Software Library + * + * Introduction + * + * This user manual describes the CMSIS DSP software library, + * a suite of common signal processing functions for use on Cortex-M processor based devices. + * + * The library is divided into a number of modules each covering a specific category: + * - Basic math functions + * - Fast math functions + * - Complex math functions + * - Filters + * - Matrix functions + * - Transforms + * - Motor control functions + * - Statistical functions + * - Support functions + * - Interpolation functions + * + * The library has separate functions for operating on 8-bit integers, 16-bit integers, + * 32-bit integer and 32-bit floating-point values. + * + * Processor Support + * + * The library is completely written in C and is fully CMSIS compliant. + * High performance is achieved through maximum use of Cortex-M4 intrinsics. + * + * The supplied library source code also builds and runs on the Cortex-M3 and Cortex-M0 processor, + * with the DSP intrinsics being emulated through software. + * + * + * Toolchain Support + * + * The library has been developed and tested with MDK-ARM version 4.21. + * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly. + * + * Using the Library + * + * The library installer contains prebuilt versions of the libraries in the Lib folder. + * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4) + * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4) + * - arm_cortexM4l_math.lib (Little endian on Cortex-M4) + * - arm_cortexM4b_math.lib (Big endian on Cortex-M4) + * - arm_cortexM3l_math.lib (Little endian on Cortex-M3) + * - arm_cortexM3b_math.lib (Big endian on Cortex-M3) + * - arm_cortexM0l_math.lib (Little endian on Cortex-M0) + * - arm_cortexM0b_math.lib (Big endian on Cortex-M3) + * + * The library functions are declared in the public file arm_math.h which is placed in the Include folder. + * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single + * public header file arm_math.h for Cortex-M4/M3/M0 with little endian and big endian. Same header file will be used for floating point unit(FPU) variants. + * Define the appropriate pre processor MACRO ARM_MATH_CM4 or ARM_MATH_CM3 or + * ARM_MATH_CM0 depending on the target processor in the application. + * + * Examples + * + * The library ships with a number of examples which demonstrate how to use the library functions. + * + * Building the Library + * + * The library installer contains project files to re build libraries on MDK Tool chain in the CMSIS\DSP_Lib\Source\ARM folder. + * - arm_cortexM0b_math.uvproj + * - arm_cortexM0l_math.uvproj + * - arm_cortexM3b_math.uvproj + * - arm_cortexM3l_math.uvproj + * - arm_cortexM4b_math.uvproj + * - arm_cortexM4l_math.uvproj + * - arm_cortexM4bf_math.uvproj + * - arm_cortexM4lf_math.uvproj + * + * Each library project have differant pre-processor macros. + * + * ARM_MATH_CMx: + * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target + * and ARM_MATH_CM0 for building library on cortex-M0 target. + * + * ARM_MATH_BIG_ENDIAN: + * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets. + * + * ARM_MATH_MATRIX_CHECK: + * Define macro for checking on the input and output sizes of matrices + * + * ARM_MATH_ROUNDING: + * Define macro for rounding on support functions + * + * __FPU_PRESENT: + * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries + * + * + * The project can be built by opening the appropriate project in MDK-ARM 4.21 chain and defining the optional pre processor MACROs detailed above. + * + * Copyright Notice + * + * Copyright (C) 2010 ARM Limited. All rights reserved. + */ + + +/** + * @defgroup groupMath Basic Math Functions + */ + +/** + * @defgroup groupFastMath Fast Math Functions + * This set of functions provides a fast approximation to sine, cosine, and square root. + * As compared to most of the other functions in the CMSIS math library, the fast math functions + * operate on individual values and not arrays. + * There are separate functions for Q15, Q31, and floating-point data. + * + */ + +/** + * @defgroup groupCmplxMath Complex Math Functions + * This set of functions operates on complex data vectors. + * The data in the complex arrays is stored in an interleaved fashion + * (real, imag, real, imag, ...). + * In the API functions, the number of samples in a complex array refers + * to the number of complex values; the array contains twice this number of + * real values. + */ + +/** + * @defgroup groupFilters Filtering Functions + */ + +/** + * @defgroup groupMatrix Matrix Functions + * + * This set of functions provides basic matrix math operations. + * The functions operate on matrix data structures. For example, + * the type + * definition for the floating-point matrix structure is shown + * below: + * 
+ *     typedef struct
+ *     {
+ *       uint16_t numRows;     // number of rows of the matrix.
+ *       uint16_t numCols;     // number of columns of the matrix.
+ *       float32_t *pData;     // points to the data of the matrix.
+ *     } arm_matrix_instance_f32;
+ *
+ * There are similar definitions for Q15 and Q31 data types. + * + * The structure specifies the size of the matrix and then points to + * an array of data. The array is of size numRows X numCols + * and the values are arranged in row order. That is, the + * matrix element (i, j) is stored at: + * 
+ *     pData[i*numCols + j]
+ *
+ * + * \par Init Functions + * There is an associated initialization function for each type of matrix + * data structure. + * The initialization function sets the values of the internal structure fields. + * Refer to the function arm_mat_init_f32(), arm_mat_init_q31() + * and arm_mat_init_q15() for floating-point, Q31 and Q15 types, respectively. + * + * \par + * Use of the initialization function is optional. However, if initialization function is used + * then the instance structure cannot be placed into a const data section. + * To place the instance structure in a const data + * section, manually initialize the data structure. For example: + * 
+ * arm_matrix_instance_f32 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q31 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q15 S = {nRows, nColumns, pData};
+ *
+ * where nRows specifies the number of rows, nColumns + * specifies the number of columns, and pData points to the + * data array. + * + * \par Size Checking + * By default all of the matrix functions perform size checking on the input and + * output matrices. For example, the matrix addition function verifies that the + * two input matrices and the output matrix all have the same number of rows and + * columns. If the size check fails the functions return: + * 
+ *     ARM_MATH_SIZE_MISMATCH
+ *
+ * Otherwise the functions return + * 
+ *     ARM_MATH_SUCCESS
+ *
+ * There is some overhead associated with this matrix size checking. + * The matrix size checking is enabled via the #define + * 
+ *     ARM_MATH_MATRIX_CHECK
+ *
+ * within the library project settings. By default this macro is defined + * and size checking is enabled. By changing the project settings and + * undefining this macro size checking is eliminated and the functions + * run a bit faster. With size checking disabled the functions always + * return ARM_MATH_SUCCESS. + */ + +/** + * @defgroup groupTransforms Transform Functions + */ + +/** + * @defgroup groupController Controller Functions + */ + +/** + * @defgroup groupStats Statistics Functions + */ +/** + * @defgroup groupSupport Support Functions + */ + +/** + * @defgroup groupInterpolation Interpolation Functions + * These functions perform 1- and 2-dimensional interpolation of data. + * Linear interpolation is used for 1-dimensional data and + * bilinear interpolation is used for 2-dimensional data. + */ + +/** + * @defgroup groupExamples Examples + */ +#ifndef _ARM_MATH_H +#define _ARM_MATH_H + +#define __CMSIS_GENERIC /* disable NVIC and Systick functions */ + +#if defined (ARM_MATH_CM4) + #include "core_cm4.h" +#elif defined (ARM_MATH_CM3) + #include "core_cm3.h" +#elif defined (ARM_MATH_CM0) + #include "core_cm0.h" +#else +#include "ARMCM4.h" +#warning "Define either ARM_MATH_CM4 OR ARM_MATH_CM3...By Default building on ARM_MATH_CM4....." +#endif + +#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */ +#include "string.h" + #include "math.h" +#ifdef __cplusplus +extern "C" +{ +#endif + + + /** + * @brief Macros required for reciprocal calculation in Normalized LMS + */ + +#define DELTA_Q31 (0x100) +#define DELTA_Q15 0x5 +#define INDEX_MASK 0x0000003F +#define PI 3.14159265358979f + + /** + * @brief Macros required for SINE and COSINE Fast math approximations + */ + +#define TABLE_SIZE 256 +#define TABLE_SPACING_Q31 0x800000 +#define TABLE_SPACING_Q15 0x80 + + /** + * @brief Macros required for SINE and COSINE Controller functions + */ + /* 1.31(q31) Fixed value of 2/360 */ + /* -1 to +1 is divided into 360 values so total spacing is (2/360) */ +#define INPUT_SPACING 0xB60B61 + + + /** + * @brief Error status returned by some functions in the library. + */ + + typedef enum + { + ARM_MATH_SUCCESS = 0, /**< No error */ + ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */ + ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */ + ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */ + ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */ + ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */ + ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */ + } arm_status; + + /** + * @brief 8-bit fractional data type in 1.7 format. + */ + typedef int8_t q7_t; + + /** + * @brief 16-bit fractional data type in 1.15 format. + */ + typedef int16_t q15_t; + + /** + * @brief 32-bit fractional data type in 1.31 format. + */ + typedef int32_t q31_t; + + /** + * @brief 64-bit fractional data type in 1.63 format. + */ + typedef int64_t q63_t; + + /** + * @brief 32-bit floating-point type definition. + */ + typedef float float32_t; + + /** + * @brief 64-bit floating-point type definition. + */ + typedef double float64_t; + + /** + * @brief definition to read/write two 16 bit values. + */ +#define __SIMD32(addr) (*(int32_t **) & (addr)) + +#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0) + /** + * @brief definition to pack two 16 bit values. + */ +#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \ + (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) ) + +#endif + + + /** + * @brief definition to pack four 8 bit values. + */ +#ifndef ARM_MATH_BIG_ENDIAN + +#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \ + (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \ + (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \ + (((int32_t)(v3) << 24) & (int32_t)0xFF000000) ) +#else + +#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \ + (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \ + (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \ + (((int32_t)(v0) << 24) & (int32_t)0xFF000000) ) + +#endif + + + /** + * @brief Clips Q63 to Q31 values. + */ + static __INLINE q31_t clip_q63_to_q31( + q63_t x) + { + return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? + ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x; + } + + /** + * @brief Clips Q63 to Q15 values. + */ + static __INLINE q15_t clip_q63_to_q15( + q63_t x) + { + return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? + ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15); + } + + /** + * @brief Clips Q31 to Q7 values. + */ + static __INLINE q7_t clip_q31_to_q7( + q31_t x) + { + return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ? + ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x; + } + + /** + * @brief Clips Q31 to Q15 values. + */ + static __INLINE q15_t clip_q31_to_q15( + q31_t x) + { + return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ? + ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x; + } + + /** + * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format. + */ + + static __INLINE q63_t mult32x64( + q63_t x, + q31_t y) + { + return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) + + (((q63_t) (x >> 32) * y))); + } + + +#if defined (ARM_MATH_CM0) && defined ( __CC_ARM ) +#define __CLZ __clz +#endif + +#if defined (ARM_MATH_CM0) && ((defined (__ICCARM__)) ||(defined (__GNUC__)) || defined (__TASKING__) ) + + static __INLINE uint32_t __CLZ(q31_t data); + + + static __INLINE uint32_t __CLZ(q31_t data) + { + uint32_t count = 0; + uint32_t mask = 0x80000000; + + while((data & mask) == 0) + { + count += 1u; + mask = mask >> 1u; + } + + return(count); + + } + +#endif + + /** + * @brief Function to Calculates 1/in(reciprocal) value of Q31 Data type. + */ + + static __INLINE uint32_t arm_recip_q31( + q31_t in, + q31_t * dst, + q31_t * pRecipTable) + { + + uint32_t out, tempVal; + uint32_t index, i; + uint32_t signBits; + + if(in > 0) + { + signBits = __CLZ(in) - 1; + } + else + { + signBits = __CLZ(-in) - 1; + } + + /* Convert input sample to 1.31 format */ + in = in << signBits; + + /* calculation of index for initial approximated Val */ + index = (uint32_t) (in >> 24u); + index = (index & INDEX_MASK); + + /* 1.31 with exp 1 */ + out = pRecipTable[index]; + + /* calculation of reciprocal value */ + /* running approximation for two iterations */ + for (i = 0u; i < 2u; i++) + { + tempVal = (q31_t) (((q63_t) in * out) >> 31u); + tempVal = 0x7FFFFFFF - tempVal; + /* 1.31 with exp 1 */ + //out = (q31_t) (((q63_t) out * tempVal) >> 30u); + out = (q31_t) clip_q63_to_q31(((q63_t) out * tempVal) >> 30u); + } + + /* write output */ + *dst = out; + + /* return num of signbits of out = 1/in value */ + return (signBits + 1u); + + } + + /** + * @brief Function to Calculates 1/in(reciprocal) value of Q15 Data type. + */ + static __INLINE uint32_t arm_recip_q15( + q15_t in, + q15_t * dst, + q15_t * pRecipTable) + { + + uint32_t out = 0, tempVal = 0; + uint32_t index = 0, i = 0; + uint32_t signBits = 0; + + if(in > 0) + { + signBits = __CLZ(in) - 17; + } + else + { + signBits = __CLZ(-in) - 17; + } + + /* Convert input sample to 1.15 format */ + in = in << signBits; + + /* calculation of index for initial approximated Val */ + index = in >> 8; + index = (index & INDEX_MASK); + + /* 1.15 with exp 1 */ + out = pRecipTable[index]; + + /* calculation of reciprocal value */ + /* running approximation for two iterations */ + for (i = 0; i < 2; i++) + { + tempVal = (q15_t) (((q31_t) in * out) >> 15); + tempVal = 0x7FFF - tempVal; + /* 1.15 with exp 1 */ + out = (q15_t) (((q31_t) out * tempVal) >> 14); + } + + /* write output */ + *dst = out; + + /* return num of signbits of out = 1/in value */ + return (signBits + 1); + + } + + + /* + * @brief C custom defined intrinisic function for only M0 processors + */ +#if defined(ARM_MATH_CM0) + + static __INLINE q31_t __SSAT( + q31_t x, + uint32_t y) + { + int32_t posMax, negMin; + uint32_t i; + + posMax = 1; + for (i = 0; i < (y - 1); i++) + { + posMax = posMax * 2; + } + + if(x > 0) + { + posMax = (posMax - 1); + + if(x > posMax) + { + x = posMax; + } + } + else + { + negMin = -posMax; + + if(x < negMin) + { + x = negMin; + } + } + return (x); + + + } + +#endif /* end of ARM_MATH_CM0 */ + + + + /* + * @brief C custom defined intrinsic function for M3 and M0 processors + */ +#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0) + + /* + * @brief C custom defined QADD8 for M3 and M0 processors + */ + static __INLINE q31_t __QADD8( + q31_t x, + q31_t y) + { + + q31_t sum; + q7_t r, s, t, u; + + r = (char) x; + s = (char) y; + + r = __SSAT((q31_t) (r + s), 8); + s = __SSAT(((q31_t) (((x << 16) >> 24) + ((y << 16) >> 24))), 8); + t = __SSAT(((q31_t) (((x << 8) >> 24) + ((y << 8) >> 24))), 8); + u = __SSAT(((q31_t) ((x >> 24) + (y >> 24))), 8); + + sum = (((q31_t) u << 24) & 0xFF000000) | (((q31_t) t << 16) & 0x00FF0000) | + (((q31_t) s << 8) & 0x0000FF00) | (r & 0x000000FF); + + return sum; + + } + + /* + * @brief C custom defined QSUB8 for M3 and M0 processors + */ + static __INLINE q31_t __QSUB8( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s, t, u; + + r = (char) x; + s = (char) y; + + r = __SSAT((r - s), 8); + s = __SSAT(((q31_t) (((x << 16) >> 24) - ((y << 16) >> 24))), 8) << 8; + t = __SSAT(((q31_t) (((x << 8) >> 24) - ((y << 8) >> 24))), 8) << 16; + u = __SSAT(((q31_t) ((x >> 24) - (y >> 24))), 8) << 24; + + sum = + (u & 0xFF000000) | (t & 0x00FF0000) | (s & 0x0000FF00) | (r & 0x000000FF); + + return sum; + } + + /* + * @brief C custom defined QADD16 for M3 and M0 processors + */ + + /* + * @brief C custom defined QADD16 for M3 and M0 processors + */ + static __INLINE q31_t __QADD16( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = __SSAT(r + s, 16); + s = __SSAT(((q31_t) ((x >> 16) + (y >> 16))), 16) << 16; + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + + } + + /* + * @brief C custom defined SHADD16 for M3 and M0 processors + */ + static __INLINE q31_t __SHADD16( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = ((r >> 1) + (s >> 1)); + s = ((q31_t) ((x >> 17) + (y >> 17))) << 16; + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + + } + + /* + * @brief C custom defined QSUB16 for M3 and M0 processors + */ + static __INLINE q31_t __QSUB16( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = __SSAT(r - s, 16); + s = __SSAT(((q31_t) ((x >> 16) - (y >> 16))), 16) << 16; + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + } + + /* + * @brief C custom defined SHSUB16 for M3 and M0 processors + */ + static __INLINE q31_t __SHSUB16( + q31_t x, + q31_t y) + { + + q31_t diff; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = ((r >> 1) - (s >> 1)); + s = (((x >> 17) - (y >> 17)) << 16); + + diff = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return diff; + } + + /* + * @brief C custom defined QASX for M3 and M0 processors + */ + static __INLINE q31_t __QASX( + q31_t x, + q31_t y) + { + + q31_t sum = 0; + + sum = ((sum + clip_q31_to_q15((q31_t) ((short) (x >> 16) + (short) y))) << 16) + + clip_q31_to_q15((q31_t) ((short) x - (short) (y >> 16))); + + return sum; + } + + /* + * @brief C custom defined SHASX for M3 and M0 processors + */ + static __INLINE q31_t __SHASX( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = ((r >> 1) - (y >> 17)); + s = (((x >> 17) + (s >> 1)) << 16); + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + } + + + /* + * @brief C custom defined QSAX for M3 and M0 processors + */ + static __INLINE q31_t __QSAX( + q31_t x, + q31_t y) + { + + q31_t sum = 0; + + sum = ((sum + clip_q31_to_q15((q31_t) ((short) (x >> 16) - (short) y))) << 16) + + clip_q31_to_q15((q31_t) ((short) x + (short) (y >> 16))); + + return sum; + } + + /* + * @brief C custom defined SHSAX for M3 and M0 processors + */ + static __INLINE q31_t __SHSAX( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = ((r >> 1) + (y >> 17)); + s = (((x >> 17) - (s >> 1)) << 16); + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + } + + /* + * @brief C custom defined SMUSDX for M3 and M0 processors + */ + static __INLINE q31_t __SMUSDX( + q31_t x, + q31_t y) + { + + return ((q31_t)(((short) x * (short) (y >> 16)) - + ((short) (x >> 16) * (short) y))); + } + + /* + * @brief C custom defined SMUADX for M3 and M0 processors + */ + static __INLINE q31_t __SMUADX( + q31_t x, + q31_t y) + { + + return ((q31_t)(((short) x * (short) (y >> 16)) + + ((short) (x >> 16) * (short) y))); + } + + /* + * @brief C custom defined QADD for M3 and M0 processors + */ + static __INLINE q31_t __QADD( + q31_t x, + q31_t y) + { + return clip_q63_to_q31((q63_t) x + y); + } + + /* + * @brief C custom defined QSUB for M3 and M0 processors + */ + static __INLINE q31_t __QSUB( + q31_t x, + q31_t y) + { + return clip_q63_to_q31((q63_t) x - y); + } + + /* + * @brief C custom defined SMLAD for M3 and M0 processors + */ + static __INLINE q31_t __SMLAD( + q31_t x, + q31_t y, + q31_t sum) + { + + return (sum + ((short) (x >> 16) * (short) (y >> 16)) + + ((short) x * (short) y)); + } + + /* + * @brief C custom defined SMLADX for M3 and M0 processors + */ + static __INLINE q31_t __SMLADX( + q31_t x, + q31_t y, + q31_t sum) + { + + return (sum + ((short) (x >> 16) * (short) (y)) + + ((short) x * (short) (y >> 16))); + } + + /* + * @brief C custom defined SMLSDX for M3 and M0 processors + */ + static __INLINE q31_t __SMLSDX( + q31_t x, + q31_t y, + q31_t sum) + { + + return (sum - ((short) (x >> 16) * (short) (y)) + + ((short) x * (short) (y >> 16))); + } + + /* + * @brief C custom defined SMLALD for M3 and M0 processors + */ + static __INLINE q63_t __SMLALD( + q31_t x, + q31_t y, + q63_t sum) + { + + return (sum + ((short) (x >> 16) * (short) (y >> 16)) + + ((short) x * (short) y)); + } + + /* + * @brief C custom defined SMLALDX for M3 and M0 processors + */ + static __INLINE q63_t __SMLALDX( + q31_t x, + q31_t y, + q63_t sum) + { + + return (sum + ((short) (x >> 16) * (short) y)) + + ((short) x * (short) (y >> 16)); + } + + /* + * @brief C custom defined SMUAD for M3 and M0 processors + */ + static __INLINE q31_t __SMUAD( + q31_t x, + q31_t y) + { + + return (((x >> 16) * (y >> 16)) + + (((x << 16) >> 16) * ((y << 16) >> 16))); + } + + /* + * @brief C custom defined SMUSD for M3 and M0 processors + */ + static __INLINE q31_t __SMUSD( + q31_t x, + q31_t y) + { + + return (-((x >> 16) * (y >> 16)) + + (((x << 16) >> 16) * ((y << 16) >> 16))); + } + + + + +#endif /* (ARM_MATH_CM3) || defined (ARM_MATH_CM0) */ + + + /** + * @brief Instance structure for the Q7 FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + } arm_fir_instance_q7; + + /** + * @brief Instance structure for the Q15 FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + } arm_fir_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + } arm_fir_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + } arm_fir_instance_f32; + + + /** + * @brief Processing function for the Q7 FIR filter. + * @param[in] *S points to an instance of the Q7 FIR filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_q7( + const arm_fir_instance_q7 * S, + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q7 FIR filter. + * @param[in,out] *S points to an instance of the Q7 FIR structure. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed. + * @return none + */ + void arm_fir_init_q7( + arm_fir_instance_q7 * S, + uint16_t numTaps, + q7_t * pCoeffs, + q7_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q15 FIR filter. + * @param[in] *S points to an instance of the Q15 FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_q15( + const arm_fir_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q15 FIR filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_fast_q15( + const arm_fir_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q15 FIR filter. + * @param[in,out] *S points to an instance of the Q15 FIR filter structure. + * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if + * numTaps is not a supported value. + */ + + arm_status arm_fir_init_q15( + arm_fir_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 FIR filter. + * @param[in] *S points to an instance of the Q31 FIR filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_q31( + const arm_fir_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q31 FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_fast_q31( + const arm_fir_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 FIR filter. + * @param[in,out] *S points to an instance of the Q31 FIR structure. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + * @return none. + */ + void arm_fir_init_q31( + arm_fir_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the floating-point FIR filter. + * @param[in] *S points to an instance of the floating-point FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_f32( + const arm_fir_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point FIR filter. + * @param[in,out] *S points to an instance of the floating-point FIR filter structure. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + * @return none. + */ + void arm_fir_init_f32( + arm_fir_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q15 Biquad cascade filter. + */ + typedef struct + { + int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ + + } arm_biquad_casd_df1_inst_q15; + + + /** + * @brief Instance structure for the Q31 Biquad cascade filter. + */ + typedef struct + { + uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ + + } arm_biquad_casd_df1_inst_q31; + + /** + * @brief Instance structure for the floating-point Biquad cascade filter. + */ + typedef struct + { + uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + + + } arm_biquad_casd_df1_inst_f32; + + + + /** + * @brief Processing function for the Q15 Biquad cascade filter. + * @param[in] *S points to an instance of the Q15 Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_q15( + const arm_biquad_casd_df1_inst_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q15 Biquad cascade filter. + * @param[in,out] *S points to an instance of the Q15 Biquad cascade structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format + * @return none + */ + + void arm_biquad_cascade_df1_init_q15( + arm_biquad_casd_df1_inst_q15 * S, + uint8_t numStages, + q15_t * pCoeffs, + q15_t * pState, + int8_t postShift); + + + /** + * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q15 Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_fast_q15( + const arm_biquad_casd_df1_inst_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 Biquad cascade filter + * @param[in] *S points to an instance of the Q31 Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_q31( + const arm_biquad_casd_df1_inst_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q31 Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_fast_q31( + const arm_biquad_casd_df1_inst_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 Biquad cascade filter. + * @param[in,out] *S points to an instance of the Q31 Biquad cascade structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format + * @return none + */ + + void arm_biquad_cascade_df1_init_q31( + arm_biquad_casd_df1_inst_q31 * S, + uint8_t numStages, + q31_t * pCoeffs, + q31_t * pState, + int8_t postShift); + + /** + * @brief Processing function for the floating-point Biquad cascade filter. + * @param[in] *S points to an instance of the floating-point Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_f32( + const arm_biquad_casd_df1_inst_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point Biquad cascade filter. + * @param[in,out] *S points to an instance of the floating-point Biquad cascade structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @return none + */ + + void arm_biquad_cascade_df1_init_f32( + arm_biquad_casd_df1_inst_f32 * S, + uint8_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + + /** + * @brief Instance structure for the floating-point matrix structure. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + float32_t *pData; /**< points to the data of the matrix. */ + } arm_matrix_instance_f32; + + /** + * @brief Instance structure for the Q15 matrix structure. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + q15_t *pData; /**< points to the data of the matrix. */ + + } arm_matrix_instance_q15; + + /** + * @brief Instance structure for the Q31 matrix structure. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + q31_t *pData; /**< points to the data of the matrix. */ + + } arm_matrix_instance_q31; + + + + /** + * @brief Floating-point matrix addition. + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_add_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + /** + * @brief Q15 matrix addition. + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_add_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst); + + /** + * @brief Q31 matrix addition. + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_add_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix transpose. + * @param[in] *pSrc points to the input matrix + * @param[out] *pDst points to the output matrix + * @return The function returns either ARM_MATH_SIZE_MISMATCH + * or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_trans_f32( + const arm_matrix_instance_f32 * pSrc, + arm_matrix_instance_f32 * pDst); + + + /** + * @brief Q15 matrix transpose. + * @param[in] *pSrc points to the input matrix + * @param[out] *pDst points to the output matrix + * @return The function returns either ARM_MATH_SIZE_MISMATCH + * or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_trans_q15( + const arm_matrix_instance_q15 * pSrc, + arm_matrix_instance_q15 * pDst); + + /** + * @brief Q31 matrix transpose. + * @param[in] *pSrc points to the input matrix + * @param[out] *pDst points to the output matrix + * @return The function returns either ARM_MATH_SIZE_MISMATCH + * or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_trans_q31( + const arm_matrix_instance_q31 * pSrc, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix multiplication + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + /** + * @brief Q15 matrix multiplication + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst, + q15_t * pState); + + /** + * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @param[in] *pState points to the array for storing intermediate results + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_fast_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst, + q15_t * pState); + + /** + * @brief Q31 matrix multiplication + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + /** + * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_fast_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix subtraction + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_sub_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + /** + * @brief Q15 matrix subtraction + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_sub_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst); + + /** + * @brief Q31 matrix subtraction + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_sub_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + /** + * @brief Floating-point matrix scaling. + * @param[in] *pSrc points to the input matrix + * @param[in] scale scale factor + * @param[out] *pDst points to the output matrix + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_scale_f32( + const arm_matrix_instance_f32 * pSrc, + float32_t scale, + arm_matrix_instance_f32 * pDst); + + /** + * @brief Q15 matrix scaling. + * @param[in] *pSrc points to input matrix + * @param[in] scaleFract fractional portion of the scale factor + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to output matrix + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_scale_q15( + const arm_matrix_instance_q15 * pSrc, + q15_t scaleFract, + int32_t shift, + arm_matrix_instance_q15 * pDst); + + /** + * @brief Q31 matrix scaling. + * @param[in] *pSrc points to input matrix + * @param[in] scaleFract fractional portion of the scale factor + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_scale_q31( + const arm_matrix_instance_q31 * pSrc, + q31_t scaleFract, + int32_t shift, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Q31 matrix initialization. + * @param[in,out] *S points to an instance of the floating-point matrix structure. + * @param[in] nRows number of rows in the matrix. + * @param[in] nColumns number of columns in the matrix. + * @param[in] *pData points to the matrix data array. + * @return none + */ + + void arm_mat_init_q31( + arm_matrix_instance_q31 * S, + uint16_t nRows, + uint16_t nColumns, + q31_t *pData); + + /** + * @brief Q15 matrix initialization. + * @param[in,out] *S points to an instance of the floating-point matrix structure. + * @param[in] nRows number of rows in the matrix. + * @param[in] nColumns number of columns in the matrix. + * @param[in] *pData points to the matrix data array. + * @return none + */ + + void arm_mat_init_q15( + arm_matrix_instance_q15 * S, + uint16_t nRows, + uint16_t nColumns, + q15_t *pData); + + /** + * @brief Floating-point matrix initialization. + * @param[in,out] *S points to an instance of the floating-point matrix structure. + * @param[in] nRows number of rows in the matrix. + * @param[in] nColumns number of columns in the matrix. + * @param[in] *pData points to the matrix data array. + * @return none + */ + + void arm_mat_init_f32( + arm_matrix_instance_f32 * S, + uint16_t nRows, + uint16_t nColumns, + float32_t *pData); + + + + /** + * @brief Instance structure for the Q15 PID Control. + */ + typedef struct + { + q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + #ifdef ARM_MATH_CM0 + q15_t A1; + q15_t A2; + #else + q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/ + #endif + q15_t state[3]; /**< The state array of length 3. */ + q15_t Kp; /**< The proportional gain. */ + q15_t Ki; /**< The integral gain. */ + q15_t Kd; /**< The derivative gain. */ + } arm_pid_instance_q15; + + /** + * @brief Instance structure for the Q31 PID Control. + */ + typedef struct + { + q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ + q31_t A2; /**< The derived gain, A2 = Kd . */ + q31_t state[3]; /**< The state array of length 3. */ + q31_t Kp; /**< The proportional gain. */ + q31_t Ki; /**< The integral gain. */ + q31_t Kd; /**< The derivative gain. */ + + } arm_pid_instance_q31; + + /** + * @brief Instance structure for the floating-point PID Control. + */ + typedef struct + { + float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ + float32_t A2; /**< The derived gain, A2 = Kd . */ + float32_t state[3]; /**< The state array of length 3. */ + float32_t Kp; /**< The proportional gain. */ + float32_t Ki; /**< The integral gain. */ + float32_t Kd; /**< The derivative gain. */ + } arm_pid_instance_f32; + + + + /** + * @brief Initialization function for the floating-point PID Control. + * @param[in,out] *S points to an instance of the PID structure. + * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. + * @return none. + */ + void arm_pid_init_f32( + arm_pid_instance_f32 * S, + int32_t resetStateFlag); + + /** + * @brief Reset function for the floating-point PID Control. + * @param[in,out] *S is an instance of the floating-point PID Control structure + * @return none + */ + void arm_pid_reset_f32( + arm_pid_instance_f32 * S); + + + /** + * @brief Initialization function for the Q31 PID Control. + * @param[in,out] *S points to an instance of the Q15 PID structure. + * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. + * @return none. + */ + void arm_pid_init_q31( + arm_pid_instance_q31 * S, + int32_t resetStateFlag); + + + /** + * @brief Reset function for the Q31 PID Control. + * @param[in,out] *S points to an instance of the Q31 PID Control structure + * @return none + */ + + void arm_pid_reset_q31( + arm_pid_instance_q31 * S); + + /** + * @brief Initialization function for the Q15 PID Control. + * @param[in,out] *S points to an instance of the Q15 PID structure. + * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. + * @return none. + */ + void arm_pid_init_q15( + arm_pid_instance_q15 * S, + int32_t resetStateFlag); + + /** + * @brief Reset function for the Q15 PID Control. + * @param[in,out] *S points to an instance of the q15 PID Control structure + * @return none + */ + void arm_pid_reset_q15( + arm_pid_instance_q15 * S); + + + /** + * @brief Instance structure for the floating-point Linear Interpolate function. + */ + typedef struct + { + uint32_t nValues; + float32_t x1; + float32_t xSpacing; + float32_t *pYData; /**< pointer to the table of Y values */ + } arm_linear_interp_instance_f32; + + /** + * @brief Instance structure for the floating-point bilinear interpolation function. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + float32_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_f32; + + /** + * @brief Instance structure for the Q31 bilinear interpolation function. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q31_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q31; + + /** + * @brief Instance structure for the Q15 bilinear interpolation function. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q15_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q15; + + /** + * @brief Instance structure for the Q15 bilinear interpolation function. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q7_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q7; + + + /** + * @brief Q7 vector multiplication. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_mult_q7( + q7_t * pSrcA, + q7_t * pSrcB, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Q15 vector multiplication. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_mult_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Q31 vector multiplication. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_mult_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Floating-point vector multiplication. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_mult_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q15 CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q15_t *pTwiddle; /**< points to the twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix4_instance_q15; + + /** + * @brief Instance structure for the Q31 CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q31_t *pTwiddle; /**< points to the twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix4_instance_q31; + + /** + * @brief Instance structure for the floating-point CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + float32_t *pTwiddle; /**< points to the twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + float32_t onebyfftLen; /**< value of 1/fftLen. */ + } arm_cfft_radix4_instance_f32; + + /** + * @brief Processing function for the Q15 CFFT/CIFFT. + * @param[in] *S points to an instance of the Q15 CFFT/CIFFT structure. + * @param[in, out] *pSrc points to the complex data buffer. Processing occurs in-place. + * @return none. + */ + + void arm_cfft_radix4_q15( + const arm_cfft_radix4_instance_q15 * S, + q15_t * pSrc); + + /** + * @brief Initialization function for the Q15 CFFT/CIFFT. + * @param[in,out] *S points to an instance of the Q15 CFFT/CIFFT structure. + * @param[in] fftLen length of the FFT. + * @param[in] ifftFlag flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. + * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLen is not a supported value. + */ + + arm_status arm_cfft_radix4_init_q15( + arm_cfft_radix4_instance_q15 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + /** + * @brief Processing function for the Q31 CFFT/CIFFT. + * @param[in] *S points to an instance of the Q31 CFFT/CIFFT structure. + * @param[in, out] *pSrc points to the complex data buffer. Processing occurs in-place. + * @return none. + */ + + void arm_cfft_radix4_q31( + const arm_cfft_radix4_instance_q31 * S, + q31_t * pSrc); + + /** + * @brief Initialization function for the Q31 CFFT/CIFFT. + * @param[in,out] *S points to an instance of the Q31 CFFT/CIFFT structure. + * @param[in] fftLen length of the FFT. + * @param[in] ifftFlag flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. + * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLen is not a supported value. + */ + + arm_status arm_cfft_radix4_init_q31( + arm_cfft_radix4_instance_q31 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + /** + * @brief Processing function for the floating-point CFFT/CIFFT. + * @param[in] *S points to an instance of the floating-point CFFT/CIFFT structure. + * @param[in, out] *pSrc points to the complex data buffer. Processing occurs in-place. + * @return none. + */ + + void arm_cfft_radix4_f32( + const arm_cfft_radix4_instance_f32 * S, + float32_t * pSrc); + + /** + * @brief Initialization function for the floating-point CFFT/CIFFT. + * @param[in,out] *S points to an instance of the floating-point CFFT/CIFFT structure. + * @param[in] fftLen length of the FFT. + * @param[in] ifftFlag flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. + * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLen is not a supported value. + */ + + arm_status arm_cfft_radix4_init_f32( + arm_cfft_radix4_instance_f32 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + + + /*---------------------------------------------------------------------- + * Internal functions prototypes FFT function + ----------------------------------------------------------------------*/ + + /** + * @brief Core function for the floating-point CFFT butterfly process. + * @param[in, out] *pSrc points to the in-place buffer of floating-point data type. + * @param[in] fftLen length of the FFT. + * @param[in] *pCoef points to the twiddle coefficient buffer. + * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. + * @return none. + */ + + void arm_radix4_butterfly_f32( + float32_t * pSrc, + uint16_t fftLen, + float32_t * pCoef, + uint16_t twidCoefModifier); + + /** + * @brief Core function for the floating-point CIFFT butterfly process. + * @param[in, out] *pSrc points to the in-place buffer of floating-point data type. + * @param[in] fftLen length of the FFT. + * @param[in] *pCoef points to twiddle coefficient buffer. + * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. + * @param[in] onebyfftLen value of 1/fftLen. + * @return none. + */ + + void arm_radix4_butterfly_inverse_f32( + float32_t * pSrc, + uint16_t fftLen, + float32_t * pCoef, + uint16_t twidCoefModifier, + float32_t onebyfftLen); + + /** + * @brief In-place bit reversal function. + * @param[in, out] *pSrc points to the in-place buffer of floating-point data type. + * @param[in] fftSize length of the FFT. + * @param[in] bitRevFactor bit reversal modifier that supports different size FFTs with the same bit reversal table. + * @param[in] *pBitRevTab points to the bit reversal table. + * @return none. + */ + + void arm_bitreversal_f32( + float32_t *pSrc, + uint16_t fftSize, + uint16_t bitRevFactor, + uint16_t *pBitRevTab); + + /** + * @brief Core function for the Q31 CFFT butterfly process. + * @param[in, out] *pSrc points to the in-place buffer of Q31 data type. + * @param[in] fftLen length of the FFT. + * @param[in] *pCoef points to twiddle coefficient buffer. + * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. + * @return none. + */ + + void arm_radix4_butterfly_q31( + q31_t *pSrc, + uint32_t fftLen, + q31_t *pCoef, + uint32_t twidCoefModifier); + + /** + * @brief Core function for the Q31 CIFFT butterfly process. + * @param[in, out] *pSrc points to the in-place buffer of Q31 data type. + * @param[in] fftLen length of the FFT. + * @param[in] *pCoef points to twiddle coefficient buffer. + * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. + * @return none. + */ + + void arm_radix4_butterfly_inverse_q31( + q31_t * pSrc, + uint32_t fftLen, + q31_t * pCoef, + uint32_t twidCoefModifier); + + /** + * @brief In-place bit reversal function. + * @param[in, out] *pSrc points to the in-place buffer of Q31 data type. + * @param[in] fftLen length of the FFT. + * @param[in] bitRevFactor bit reversal modifier that supports different size FFTs with the same bit reversal table + * @param[in] *pBitRevTab points to bit reversal table. + * @return none. + */ + + void arm_bitreversal_q31( + q31_t * pSrc, + uint32_t fftLen, + uint16_t bitRevFactor, + uint16_t *pBitRevTab); + + /** + * @brief Core function for the Q15 CFFT butterfly process. + * @param[in, out] *pSrc16 points to the in-place buffer of Q15 data type. + * @param[in] fftLen length of the FFT. + * @param[in] *pCoef16 points to twiddle coefficient buffer. + * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. + * @return none. + */ + + void arm_radix4_butterfly_q15( + q15_t *pSrc16, + uint32_t fftLen, + q15_t *pCoef16, + uint32_t twidCoefModifier); + + /** + * @brief Core function for the Q15 CIFFT butterfly process. + * @param[in, out] *pSrc16 points to the in-place buffer of Q15 data type. + * @param[in] fftLen length of the FFT. + * @param[in] *pCoef16 points to twiddle coefficient buffer. + * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. + * @return none. + */ + + void arm_radix4_butterfly_inverse_q15( + q15_t *pSrc16, + uint32_t fftLen, + q15_t *pCoef16, + uint32_t twidCoefModifier); + + /** + * @brief In-place bit reversal function. + * @param[in, out] *pSrc points to the in-place buffer of Q15 data type. + * @param[in] fftLen length of the FFT. + * @param[in] bitRevFactor bit reversal modifier that supports different size FFTs with the same bit reversal table + * @param[in] *pBitRevTab points to bit reversal table. + * @return none. + */ + + void arm_bitreversal_q15( + q15_t * pSrc, + uint32_t fftLen, + uint16_t bitRevFactor, + uint16_t *pBitRevTab); + + /** + * @brief Instance structure for the Q15 RFFT/RIFFT function. + */ + + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint32_t fftLenBy2; /**< length of the complex FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_q15; + + /** + * @brief Instance structure for the Q31 RFFT/RIFFT function. + */ + + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint32_t fftLenBy2; /**< length of the complex FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_q31; + + /** + * @brief Instance structure for the floating-point RFFT/RIFFT function. + */ + + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint16_t fftLenBy2; /**< length of the complex FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_f32; + + /** + * @brief Processing function for the Q15 RFFT/RIFFT. + * @param[in] *S points to an instance of the Q15 RFFT/RIFFT structure. + * @param[in] *pSrc points to the input buffer. + * @param[out] *pDst points to the output buffer. + * @return none. + */ + + void arm_rfft_q15( + const arm_rfft_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst); + + /** + * @brief Initialization function for the Q15 RFFT/RIFFT. + * @param[in, out] *S points to an instance of the Q15 RFFT/RIFFT structure. + * @param[in] *S_CFFT points to an instance of the Q15 CFFT/CIFFT structure. + * @param[in] fftLenReal length of the FFT. + * @param[in] ifftFlagR flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. + * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported value. + */ + + arm_status arm_rfft_init_q15( + arm_rfft_instance_q15 * S, + arm_cfft_radix4_instance_q15 * S_CFFT, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); + + /** + * @brief Processing function for the Q31 RFFT/RIFFT. + * @param[in] *S points to an instance of the Q31 RFFT/RIFFT structure. + * @param[in] *pSrc points to the input buffer. + * @param[out] *pDst points to the output buffer. + * @return none. + */ + + void arm_rfft_q31( + const arm_rfft_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst); + + /** + * @brief Initialization function for the Q31 RFFT/RIFFT. + * @param[in, out] *S points to an instance of the Q31 RFFT/RIFFT structure. + * @param[in, out] *S_CFFT points to an instance of the Q31 CFFT/CIFFT structure. + * @param[in] fftLenReal length of the FFT. + * @param[in] ifftFlagR flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. + * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported value. + */ + + arm_status arm_rfft_init_q31( + arm_rfft_instance_q31 * S, + arm_cfft_radix4_instance_q31 * S_CFFT, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); + + /** + * @brief Initialization function for the floating-point RFFT/RIFFT. + * @param[in,out] *S points to an instance of the floating-point RFFT/RIFFT structure. + * @param[in,out] *S_CFFT points to an instance of the floating-point CFFT/CIFFT structure. + * @param[in] fftLenReal length of the FFT. + * @param[in] ifftFlagR flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. + * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported value. + */ + + arm_status arm_rfft_init_f32( + arm_rfft_instance_f32 * S, + arm_cfft_radix4_instance_f32 * S_CFFT, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); + + /** + * @brief Processing function for the floating-point RFFT/RIFFT. + * @param[in] *S points to an instance of the floating-point RFFT/RIFFT structure. + * @param[in] *pSrc points to the input buffer. + * @param[out] *pDst points to the output buffer. + * @return none. + */ + + void arm_rfft_f32( + const arm_rfft_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst); + + /** + * @brief Instance structure for the floating-point DCT4/IDCT4 function. + */ + + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + float32_t normalize; /**< normalizing factor. */ + float32_t *pTwiddle; /**< points to the twiddle factor table. */ + float32_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_f32; + + /** + * @brief Initialization function for the floating-point DCT4/IDCT4. + * @param[in,out] *S points to an instance of floating-point DCT4/IDCT4 structure. + * @param[in] *S_RFFT points to an instance of floating-point RFFT/RIFFT structure. + * @param[in] *S_CFFT points to an instance of floating-point CFFT/CIFFT structure. + * @param[in] N length of the DCT4. + * @param[in] Nby2 half of the length of the DCT4. + * @param[in] normalize normalizing factor. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported transform length. + */ + + arm_status arm_dct4_init_f32( + arm_dct4_instance_f32 * S, + arm_rfft_instance_f32 * S_RFFT, + arm_cfft_radix4_instance_f32 * S_CFFT, + uint16_t N, + uint16_t Nby2, + float32_t normalize); + + /** + * @brief Processing function for the floating-point DCT4/IDCT4. + * @param[in] *S points to an instance of the floating-point DCT4/IDCT4 structure. + * @param[in] *pState points to state buffer. + * @param[in,out] *pInlineBuffer points to the in-place input and output buffer. + * @return none. + */ + + void arm_dct4_f32( + const arm_dct4_instance_f32 * S, + float32_t * pState, + float32_t * pInlineBuffer); + + /** + * @brief Instance structure for the Q31 DCT4/IDCT4 function. + */ + + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + q31_t normalize; /**< normalizing factor. */ + q31_t *pTwiddle; /**< points to the twiddle factor table. */ + q31_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_q31; + + /** + * @brief Initialization function for the Q31 DCT4/IDCT4. + * @param[in,out] *S points to an instance of Q31 DCT4/IDCT4 structure. + * @param[in] *S_RFFT points to an instance of Q31 RFFT/RIFFT structure + * @param[in] *S_CFFT points to an instance of Q31 CFFT/CIFFT structure + * @param[in] N length of the DCT4. + * @param[in] Nby2 half of the length of the DCT4. + * @param[in] normalize normalizing factor. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. + */ + + arm_status arm_dct4_init_q31( + arm_dct4_instance_q31 * S, + arm_rfft_instance_q31 * S_RFFT, + arm_cfft_radix4_instance_q31 * S_CFFT, + uint16_t N, + uint16_t Nby2, + q31_t normalize); + + /** + * @brief Processing function for the Q31 DCT4/IDCT4. + * @param[in] *S points to an instance of the Q31 DCT4 structure. + * @param[in] *pState points to state buffer. + * @param[in,out] *pInlineBuffer points to the in-place input and output buffer. + * @return none. + */ + + void arm_dct4_q31( + const arm_dct4_instance_q31 * S, + q31_t * pState, + q31_t * pInlineBuffer); + + /** + * @brief Instance structure for the Q15 DCT4/IDCT4 function. + */ + + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + q15_t normalize; /**< normalizing factor. */ + q15_t *pTwiddle; /**< points to the twiddle factor table. */ + q15_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_q15; + + /** + * @brief Initialization function for the Q15 DCT4/IDCT4. + * @param[in,out] *S points to an instance of Q15 DCT4/IDCT4 structure. + * @param[in] *S_RFFT points to an instance of Q15 RFFT/RIFFT structure. + * @param[in] *S_CFFT points to an instance of Q15 CFFT/CIFFT structure. + * @param[in] N length of the DCT4. + * @param[in] Nby2 half of the length of the DCT4. + * @param[in] normalize normalizing factor. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. + */ + + arm_status arm_dct4_init_q15( + arm_dct4_instance_q15 * S, + arm_rfft_instance_q15 * S_RFFT, + arm_cfft_radix4_instance_q15 * S_CFFT, + uint16_t N, + uint16_t Nby2, + q15_t normalize); + + /** + * @brief Processing function for the Q15 DCT4/IDCT4. + * @param[in] *S points to an instance of the Q15 DCT4 structure. + * @param[in] *pState points to state buffer. + * @param[in,out] *pInlineBuffer points to the in-place input and output buffer. + * @return none. + */ + + void arm_dct4_q15( + const arm_dct4_instance_q15 * S, + q15_t * pState, + q15_t * pInlineBuffer); + + /** + * @brief Floating-point vector addition. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_add_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Q7 vector addition. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_add_q7( + q7_t * pSrcA, + q7_t * pSrcB, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Q15 vector addition. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_add_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Q31 vector addition. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_add_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Floating-point vector subtraction. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_sub_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Q7 vector subtraction. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_sub_q7( + q7_t * pSrcA, + q7_t * pSrcB, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Q15 vector subtraction. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_sub_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Q31 vector subtraction. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_sub_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Multiplies a floating-point vector by a scalar. + * @param[in] *pSrc points to the input vector + * @param[in] scale scale factor to be applied + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_scale_f32( + float32_t * pSrc, + float32_t scale, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Multiplies a Q7 vector by a scalar. + * @param[in] *pSrc points to the input vector + * @param[in] scaleFract fractional portion of the scale value + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_scale_q7( + q7_t * pSrc, + q7_t scaleFract, + int8_t shift, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Multiplies a Q15 vector by a scalar. + * @param[in] *pSrc points to the input vector + * @param[in] scaleFract fractional portion of the scale value + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_scale_q15( + q15_t * pSrc, + q15_t scaleFract, + int8_t shift, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Multiplies a Q31 vector by a scalar. + * @param[in] *pSrc points to the input vector + * @param[in] scaleFract fractional portion of the scale value + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_scale_q31( + q31_t * pSrc, + q31_t scaleFract, + int8_t shift, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Q7 vector absolute value. + * @param[in] *pSrc points to the input buffer + * @param[out] *pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_abs_q7( + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Floating-point vector absolute value. + * @param[in] *pSrc points to the input buffer + * @param[out] *pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_abs_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Q15 vector absolute value. + * @param[in] *pSrc points to the input buffer + * @param[out] *pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_abs_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Q31 vector absolute value. + * @param[in] *pSrc points to the input buffer + * @param[out] *pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_abs_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Dot product of floating-point vectors. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] *result output result returned here + * @return none. + */ + + void arm_dot_prod_f32( + float32_t * pSrcA, + float32_t * pSrcB, + uint32_t blockSize, + float32_t * result); + + /** + * @brief Dot product of Q7 vectors. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] *result output result returned here + * @return none. + */ + + void arm_dot_prod_q7( + q7_t * pSrcA, + q7_t * pSrcB, + uint32_t blockSize, + q31_t * result); + + /** + * @brief Dot product of Q15 vectors. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] *result output result returned here + * @return none. + */ + + void arm_dot_prod_q15( + q15_t * pSrcA, + q15_t * pSrcB, + uint32_t blockSize, + q63_t * result); + + /** + * @brief Dot product of Q31 vectors. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] *result output result returned here + * @return none. + */ + + void arm_dot_prod_q31( + q31_t * pSrcA, + q31_t * pSrcB, + uint32_t blockSize, + q63_t * result); + + /** + * @brief Shifts the elements of a Q7 vector a specified number of bits. + * @param[in] *pSrc points to the input vector + * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_shift_q7( + q7_t * pSrc, + int8_t shiftBits, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Shifts the elements of a Q15 vector a specified number of bits. + * @param[in] *pSrc points to the input vector + * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_shift_q15( + q15_t * pSrc, + int8_t shiftBits, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Shifts the elements of a Q31 vector a specified number of bits. + * @param[in] *pSrc points to the input vector + * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_shift_q31( + q31_t * pSrc, + int8_t shiftBits, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Adds a constant offset to a floating-point vector. + * @param[in] *pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_offset_f32( + float32_t * pSrc, + float32_t offset, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Adds a constant offset to a Q7 vector. + * @param[in] *pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_offset_q7( + q7_t * pSrc, + q7_t offset, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Adds a constant offset to a Q15 vector. + * @param[in] *pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_offset_q15( + q15_t * pSrc, + q15_t offset, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Adds a constant offset to a Q31 vector. + * @param[in] *pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_offset_q31( + q31_t * pSrc, + q31_t offset, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Negates the elements of a floating-point vector. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_negate_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Negates the elements of a Q7 vector. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_negate_q7( + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Negates the elements of a Q15 vector. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_negate_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Negates the elements of a Q31 vector. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_negate_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + /** + * @brief Copies the elements of a floating-point vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_copy_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Copies the elements of a Q7 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_copy_q7( + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Copies the elements of a Q15 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_copy_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Copies the elements of a Q31 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_copy_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + /** + * @brief Fills a constant value into a floating-point vector. + * @param[in] value input value to be filled + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_fill_f32( + float32_t value, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Fills a constant value into a Q7 vector. + * @param[in] value input value to be filled + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_fill_q7( + q7_t value, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Fills a constant value into a Q15 vector. + * @param[in] value input value to be filled + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_fill_q15( + q15_t value, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Fills a constant value into a Q31 vector. + * @param[in] value input value to be filled + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_fill_q31( + q31_t value, + q31_t * pDst, + uint32_t blockSize); + +/** + * @brief Convolution of floating-point sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_f32( + float32_t * pSrcA, + uint32_t srcALen, + float32_t * pSrcB, + uint32_t srcBLen, + float32_t * pDst); + +/** + * @brief Convolution of Q15 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + /** + * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_fast_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + /** + * @brief Convolution of Q31 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + /** + * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_fast_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + /** + * @brief Convolution of Q7 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst); + + /** + * @brief Partial convolution of floating-point sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_f32( + float32_t * pSrcA, + uint32_t srcALen, + float32_t * pSrcB, + uint32_t srcBLen, + float32_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + /** + * @brief Partial convolution of Q15 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + /** + * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_fast_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + /** + * @brief Partial convolution of Q31 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_fast_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + /** + * @brief Partial convolution of Q7 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Instance structure for the Q15 FIR decimator. + */ + + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + } arm_fir_decimate_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR decimator. + */ + + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + + } arm_fir_decimate_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR decimator. + */ + + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + + } arm_fir_decimate_instance_f32; + + + + /** + * @brief Processing function for the floating-point FIR decimator. + * @param[in] *S points to an instance of the floating-point FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_f32( + const arm_fir_decimate_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point FIR decimator. + * @param[in,out] *S points to an instance of the floating-point FIR decimator structure. + * @param[in] numTaps number of coefficients in the filter. + * @param[in] M decimation factor. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * blockSize is not a multiple of M. + */ + + arm_status arm_fir_decimate_init_f32( + arm_fir_decimate_instance_f32 * S, + uint16_t numTaps, + uint8_t M, + float32_t * pCoeffs, + float32_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the Q15 FIR decimator. + * @param[in] *S points to an instance of the Q15 FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_q15( + const arm_fir_decimate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q15 FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_fast_q15( + const arm_fir_decimate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + + /** + * @brief Initialization function for the Q15 FIR decimator. + * @param[in,out] *S points to an instance of the Q15 FIR decimator structure. + * @param[in] numTaps number of coefficients in the filter. + * @param[in] M decimation factor. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * blockSize is not a multiple of M. + */ + + arm_status arm_fir_decimate_init_q15( + arm_fir_decimate_instance_q15 * S, + uint16_t numTaps, + uint8_t M, + q15_t * pCoeffs, + q15_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 FIR decimator. + * @param[in] *S points to an instance of the Q31 FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_q31( + const arm_fir_decimate_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q31 FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_fast_q31( + arm_fir_decimate_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 FIR decimator. + * @param[in,out] *S points to an instance of the Q31 FIR decimator structure. + * @param[in] numTaps number of coefficients in the filter. + * @param[in] M decimation factor. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * blockSize is not a multiple of M. + */ + + arm_status arm_fir_decimate_init_q31( + arm_fir_decimate_instance_q31 * S, + uint16_t numTaps, + uint8_t M, + q31_t * pCoeffs, + q31_t * pState, + uint32_t blockSize); + + + + /** + * @brief Instance structure for the Q15 FIR interpolator. + */ + + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ + } arm_fir_interpolate_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR interpolator. + */ + + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ + } arm_fir_interpolate_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR interpolator. + */ + + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */ + } arm_fir_interpolate_instance_f32; + + + /** + * @brief Processing function for the Q15 FIR interpolator. + * @param[in] *S points to an instance of the Q15 FIR interpolator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_interpolate_q15( + const arm_fir_interpolate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q15 FIR interpolator. + * @param[in,out] *S points to an instance of the Q15 FIR interpolator structure. + * @param[in] L upsample factor. + * @param[in] numTaps number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficient buffer. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * the filter length numTaps is not a multiple of the interpolation factor L. + */ + + arm_status arm_fir_interpolate_init_q15( + arm_fir_interpolate_instance_q15 * S, + uint8_t L, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 FIR interpolator. + * @param[in] *S points to an instance of the Q15 FIR interpolator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_interpolate_q31( + const arm_fir_interpolate_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 FIR interpolator. + * @param[in,out] *S points to an instance of the Q31 FIR interpolator structure. + * @param[in] L upsample factor. + * @param[in] numTaps number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficient buffer. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * the filter length numTaps is not a multiple of the interpolation factor L. + */ + + arm_status arm_fir_interpolate_init_q31( + arm_fir_interpolate_instance_q31 * S, + uint8_t L, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the floating-point FIR interpolator. + * @param[in] *S points to an instance of the floating-point FIR interpolator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_interpolate_f32( + const arm_fir_interpolate_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point FIR interpolator. + * @param[in,out] *S points to an instance of the floating-point FIR interpolator structure. + * @param[in] L upsample factor. + * @param[in] numTaps number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficient buffer. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * the filter length numTaps is not a multiple of the interpolation factor L. + */ + + arm_status arm_fir_interpolate_init_f32( + arm_fir_interpolate_instance_f32 * S, + uint8_t L, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + uint32_t blockSize); + + /** + * @brief Instance structure for the high precision Q31 Biquad cascade filter. + */ + + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ + q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */ + + } arm_biquad_cas_df1_32x64_ins_q31; + + + /** + * @param[in] *S points to an instance of the high precision Q31 Biquad cascade filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cas_df1_32x64_q31( + const arm_biquad_cas_df1_32x64_ins_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @param[in,out] *S points to an instance of the high precision Q31 Biquad cascade filter structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format + * @return none + */ + + void arm_biquad_cas_df1_32x64_init_q31( + arm_biquad_cas_df1_32x64_ins_q31 * S, + uint8_t numStages, + q31_t * pCoeffs, + q63_t * pState, + uint8_t postShift); + + + + /** + * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. + */ + + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ + float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_cascade_df2T_instance_f32; + + + /** + * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. + * @param[in] *S points to an instance of the filter data structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df2T_f32( + const arm_biquad_cascade_df2T_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. + * @param[in,out] *S points to an instance of the filter data structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @return none + */ + + void arm_biquad_cascade_df2T_init_f32( + arm_biquad_cascade_df2T_instance_f32 * S, + uint8_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + + + /** + * @brief Instance structure for the Q15 FIR lattice filter. + */ + + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + q15_t *pState; /**< points to the state variable array. The array is of length numStages. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR lattice filter. + */ + + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + q31_t *pState; /**< points to the state variable array. The array is of length numStages. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR lattice filter. + */ + + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + float32_t *pState; /**< points to the state variable array. The array is of length numStages. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_f32; + + /** + * @brief Initialization function for the Q15 FIR lattice filter. + * @param[in] *S points to an instance of the Q15 FIR lattice structure. + * @param[in] numStages number of filter stages. + * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages. + * @param[in] *pState points to the state buffer. The array is of length numStages. + * @return none. + */ + + void arm_fir_lattice_init_q15( + arm_fir_lattice_instance_q15 * S, + uint16_t numStages, + q15_t * pCoeffs, + q15_t * pState); + + + /** + * @brief Processing function for the Q15 FIR lattice filter. + * @param[in] *S points to an instance of the Q15 FIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_lattice_q15( + const arm_fir_lattice_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 FIR lattice filter. + * @param[in] *S points to an instance of the Q31 FIR lattice structure. + * @param[in] numStages number of filter stages. + * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages. + * @param[in] *pState points to the state buffer. The array is of length numStages. + * @return none. + */ + + void arm_fir_lattice_init_q31( + arm_fir_lattice_instance_q31 * S, + uint16_t numStages, + q31_t * pCoeffs, + q31_t * pState); + + + /** + * @brief Processing function for the Q31 FIR lattice filter. + * @param[in] *S points to an instance of the Q31 FIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_fir_lattice_q31( + const arm_fir_lattice_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + +/** + * @brief Initialization function for the floating-point FIR lattice filter. + * @param[in] *S points to an instance of the floating-point FIR lattice structure. + * @param[in] numStages number of filter stages. + * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages. + * @param[in] *pState points to the state buffer. The array is of length numStages. + * @return none. + */ + + void arm_fir_lattice_init_f32( + arm_fir_lattice_instance_f32 * S, + uint16_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + /** + * @brief Processing function for the floating-point FIR lattice filter. + * @param[in] *S points to an instance of the floating-point FIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_fir_lattice_f32( + const arm_fir_lattice_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Instance structure for the Q15 IIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_q15; + + /** + * @brief Instance structure for the Q31 IIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_q31; + + /** + * @brief Instance structure for the floating-point IIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_f32; + + /** + * @brief Processing function for the floating-point IIR lattice filter. + * @param[in] *S points to an instance of the floating-point IIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_f32( + const arm_iir_lattice_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point IIR lattice filter. + * @param[in] *S points to an instance of the floating-point IIR lattice structure. + * @param[in] numStages number of stages in the filter. + * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages. + * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1. + * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize-1. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_init_f32( + arm_iir_lattice_instance_f32 * S, + uint16_t numStages, + float32_t *pkCoeffs, + float32_t *pvCoeffs, + float32_t *pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 IIR lattice filter. + * @param[in] *S points to an instance of the Q31 IIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_q31( + const arm_iir_lattice_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 IIR lattice filter. + * @param[in] *S points to an instance of the Q31 IIR lattice structure. + * @param[in] numStages number of stages in the filter. + * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages. + * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1. + * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_init_q31( + arm_iir_lattice_instance_q31 * S, + uint16_t numStages, + q31_t *pkCoeffs, + q31_t *pvCoeffs, + q31_t *pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q15 IIR lattice filter. + * @param[in] *S points to an instance of the Q15 IIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_q15( + const arm_iir_lattice_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + +/** + * @brief Initialization function for the Q15 IIR lattice filter. + * @param[in] *S points to an instance of the fixed-point Q15 IIR lattice structure. + * @param[in] numStages number of stages in the filter. + * @param[in] *pkCoeffs points to reflection coefficient buffer. The array is of length numStages. + * @param[in] *pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1. + * @param[in] *pState points to state buffer. The array is of length numStages+blockSize. + * @param[in] blockSize number of samples to process per call. + * @return none. + */ + + void arm_iir_lattice_init_q15( + arm_iir_lattice_instance_q15 * S, + uint16_t numStages, + q15_t *pkCoeffs, + q15_t *pvCoeffs, + q15_t *pState, + uint32_t blockSize); + + /** + * @brief Instance structure for the floating-point LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + float32_t mu; /**< step size that controls filter coefficient updates. */ + } arm_lms_instance_f32; + + /** + * @brief Processing function for floating-point LMS filter. + * @param[in] *S points to an instance of the floating-point LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_f32( + const arm_lms_instance_f32 * S, + float32_t * pSrc, + float32_t * pRef, + float32_t * pOut, + float32_t * pErr, + uint32_t blockSize); + + /** + * @brief Initialization function for floating-point LMS filter. + * @param[in] *S points to an instance of the floating-point LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to the coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_init_f32( + arm_lms_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + float32_t mu, + uint32_t blockSize); + + /** + * @brief Instance structure for the Q15 LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q15_t mu; /**< step size that controls filter coefficient updates. */ + uint32_t postShift; /**< bit shift applied to coefficients. */ + } arm_lms_instance_q15; + + + /** + * @brief Initialization function for the Q15 LMS filter. + * @param[in] *S points to an instance of the Q15 LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to the coefficient buffer. + * @param[in] *pState points to the state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + * @return none. + */ + + void arm_lms_init_q15( + arm_lms_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + q15_t mu, + uint32_t blockSize, + uint32_t postShift); + + /** + * @brief Processing function for Q15 LMS filter. + * @param[in] *S points to an instance of the Q15 LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_q15( + const arm_lms_instance_q15 * S, + q15_t * pSrc, + q15_t * pRef, + q15_t * pOut, + q15_t * pErr, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q31 LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q31_t mu; /**< step size that controls filter coefficient updates. */ + uint32_t postShift; /**< bit shift applied to coefficients. */ + + } arm_lms_instance_q31; + + /** + * @brief Processing function for Q31 LMS filter. + * @param[in] *S points to an instance of the Q15 LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_q31( + const arm_lms_instance_q31 * S, + q31_t * pSrc, + q31_t * pRef, + q31_t * pOut, + q31_t * pErr, + uint32_t blockSize); + + /** + * @brief Initialization function for Q31 LMS filter. + * @param[in] *S points to an instance of the Q31 LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + * @return none. + */ + + void arm_lms_init_q31( + arm_lms_instance_q31 * S, + uint16_t numTaps, + q31_t *pCoeffs, + q31_t *pState, + q31_t mu, + uint32_t blockSize, + uint32_t postShift); + + /** + * @brief Instance structure for the floating-point normalized LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + float32_t mu; /**< step size that control filter coefficient updates. */ + float32_t energy; /**< saves previous frame energy. */ + float32_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_f32; + + /** + * @brief Processing function for floating-point normalized LMS filter. + * @param[in] *S points to an instance of the floating-point normalized LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_norm_f32( + arm_lms_norm_instance_f32 * S, + float32_t * pSrc, + float32_t * pRef, + float32_t * pOut, + float32_t * pErr, + uint32_t blockSize); + + /** + * @brief Initialization function for floating-point normalized LMS filter. + * @param[in] *S points to an instance of the floating-point LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_norm_init_f32( + arm_lms_norm_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + float32_t mu, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q31 normalized LMS filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q31_t mu; /**< step size that controls filter coefficient updates. */ + uint8_t postShift; /**< bit shift applied to coefficients. */ + q31_t *recipTable; /**< points to the reciprocal initial value table. */ + q31_t energy; /**< saves previous frame energy. */ + q31_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_q31; + + /** + * @brief Processing function for Q31 normalized LMS filter. + * @param[in] *S points to an instance of the Q31 normalized LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_norm_q31( + arm_lms_norm_instance_q31 * S, + q31_t * pSrc, + q31_t * pRef, + q31_t * pOut, + q31_t * pErr, + uint32_t blockSize); + + /** + * @brief Initialization function for Q31 normalized LMS filter. + * @param[in] *S points to an instance of the Q31 normalized LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + * @return none. + */ + + void arm_lms_norm_init_q31( + arm_lms_norm_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + q31_t mu, + uint32_t blockSize, + uint8_t postShift); + + /** + * @brief Instance structure for the Q15 normalized LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< Number of coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q15_t mu; /**< step size that controls filter coefficient updates. */ + uint8_t postShift; /**< bit shift applied to coefficients. */ + q15_t *recipTable; /**< Points to the reciprocal initial value table. */ + q15_t energy; /**< saves previous frame energy. */ + q15_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_q15; + + /** + * @brief Processing function for Q15 normalized LMS filter. + * @param[in] *S points to an instance of the Q15 normalized LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_norm_q15( + arm_lms_norm_instance_q15 * S, + q15_t * pSrc, + q15_t * pRef, + q15_t * pOut, + q15_t * pErr, + uint32_t blockSize); + + + /** + * @brief Initialization function for Q15 normalized LMS filter. + * @param[in] *S points to an instance of the Q15 normalized LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + * @return none. + */ + + void arm_lms_norm_init_q15( + arm_lms_norm_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + q15_t mu, + uint32_t blockSize, + uint8_t postShift); + + /** + * @brief Correlation of floating-point sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_f32( + float32_t * pSrcA, + uint32_t srcALen, + float32_t * pSrcB, + uint32_t srcBLen, + float32_t * pDst); + + /** + * @brief Correlation of Q15 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + /** + * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_fast_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + /** + * @brief Correlation of Q31 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + /** + * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_fast_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + /** + * @brief Correlation of Q7 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst); + + /** + * @brief Instance structure for the floating-point sparse FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_f32; + + /** + * @brief Instance structure for the Q31 sparse FIR filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q31; + + /** + * @brief Instance structure for the Q15 sparse FIR filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q15; + + /** + * @brief Instance structure for the Q7 sparse FIR filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q7; + + /** + * @brief Processing function for the floating-point sparse FIR filter. + * @param[in] *S points to an instance of the floating-point sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_sparse_f32( + arm_fir_sparse_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + float32_t * pScratchIn, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point sparse FIR filter. + * @param[in,out] *S points to an instance of the floating-point sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] *pCoeffs points to the array of filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] *pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + * @return none + */ + + void arm_fir_sparse_init_f32( + arm_fir_sparse_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 sparse FIR filter. + * @param[in] *S points to an instance of the Q31 sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_sparse_q31( + arm_fir_sparse_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + q31_t * pScratchIn, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 sparse FIR filter. + * @param[in,out] *S points to an instance of the Q31 sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] *pCoeffs points to the array of filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] *pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + * @return none + */ + + void arm_fir_sparse_init_q31( + arm_fir_sparse_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + /** + * @brief Processing function for the Q15 sparse FIR filter. + * @param[in] *S points to an instance of the Q15 sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] *pScratchOut points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_sparse_q15( + arm_fir_sparse_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + q15_t * pScratchIn, + q31_t * pScratchOut, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q15 sparse FIR filter. + * @param[in,out] *S points to an instance of the Q15 sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] *pCoeffs points to the array of filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] *pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + * @return none + */ + + void arm_fir_sparse_init_q15( + arm_fir_sparse_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + /** + * @brief Processing function for the Q7 sparse FIR filter. + * @param[in] *S points to an instance of the Q7 sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] *pScratchOut points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_sparse_q7( + arm_fir_sparse_instance_q7 * S, + q7_t * pSrc, + q7_t * pDst, + q7_t * pScratchIn, + q31_t * pScratchOut, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q7 sparse FIR filter. + * @param[in,out] *S points to an instance of the Q7 sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] *pCoeffs points to the array of filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] *pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + * @return none + */ + + void arm_fir_sparse_init_q7( + arm_fir_sparse_instance_q7 * S, + uint16_t numTaps, + q7_t * pCoeffs, + q7_t * pState, + int32_t *pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + + /* + * @brief Floating-point sin_cos function. + * @param[in] theta input value in degrees + * @param[out] *pSinVal points to the processed sine output. + * @param[out] *pCosVal points to the processed cos output. + * @return none. + */ + + void arm_sin_cos_f32( + float32_t theta, + float32_t *pSinVal, + float32_t *pCcosVal); + + /* + * @brief Q31 sin_cos function. + * @param[in] theta scaled input value in degrees + * @param[out] *pSinVal points to the processed sine output. + * @param[out] *pCosVal points to the processed cosine output. + * @return none. + */ + + void arm_sin_cos_q31( + q31_t theta, + q31_t *pSinVal, + q31_t *pCosVal); + + + /** + * @brief Floating-point complex conjugate. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_conj_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t numSamples); + + /** + * @brief Q31 complex conjugate. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_conj_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t numSamples); + + /** + * @brief Q15 complex conjugate. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_conj_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t numSamples); + + + + /** + * @brief Floating-point complex magnitude squared + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_squared_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t numSamples); + + /** + * @brief Q31 complex magnitude squared + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_squared_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t numSamples); + + /** + * @brief Q15 complex magnitude squared + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_squared_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t numSamples); + + + /** + * @ingroup groupController + */ + + /** + * @defgroup PID PID Motor Control + * + * A Proportional Integral Derivative (PID) controller is a generic feedback control + * loop mechanism widely used in industrial control systems. + * A PID controller is the most commonly used type of feedback controller. + * + * This set of functions implements (PID) controllers + * for Q15, Q31, and floating-point data types. The functions operate on a single sample + * of data and each call to the function returns a single processed value. + * S points to an instance of the PID control data structure. in + * is the input sample value. The functions return the output value. + * + * \par Algorithm: + * 
+   *    y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+   *    A0 = Kp + Ki + Kd
+   *    A1 = (-Kp ) - (2 * Kd )
+   *    A2 = Kd
+ * + * \par + * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant + * + * \par + * \image html PID.gif "Proportional Integral Derivative Controller" + * + * \par + * The PID controller calculates an "error" value as the difference between + * the measured output and the reference input. + * The controller attempts to minimize the error by adjusting the process control inputs. + * The proportional value determines the reaction to the current error, + * the integral value determines the reaction based on the sum of recent errors, + * and the derivative value determines the reaction based on the rate at which the error has been changing. + * + * \par Instance Structure + * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure. + * A separate instance structure must be defined for each PID Controller. + * There are separate instance structure declarations for each of the 3 supported data types. + * + * \par Reset Functions + * There is also an associated reset function for each data type which clears the state array. + * + * \par Initialization Functions + * There is also an associated initialization function for each data type. + * The initialization function performs the following operations: + * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains. + * - Zeros out the values in the state buffer. + * + * \par + * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function. + * + * \par Fixed-Point Behavior + * Care must be taken when using the fixed-point versions of the PID Controller functions. + * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup PID + * @{ + */ + + /** + * @brief Process function for the floating-point PID Control. + * @param[in,out] *S is an instance of the floating-point PID Control structure + * @param[in] in input sample to process + * @return out processed output sample. + */ + + + static __INLINE float32_t arm_pid_f32( + arm_pid_instance_f32 * S, + float32_t in) + { + float32_t out; + + /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */ + out = (S->A0 * in) + + (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]); + + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; + + /* return to application */ + return (out); + + } + + /** + * @brief Process function for the Q31 PID Control. + * @param[in,out] *S points to an instance of the Q31 PID Control structure + * @param[in] in input sample to process + * @return out processed output sample. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 64-bit accumulator. + * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit. + * Thus, if the accumulator result overflows it wraps around rather than clip. + * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions. + * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format. + */ + + static __INLINE q31_t arm_pid_q31( + arm_pid_instance_q31 * S, + q31_t in) + { + q63_t acc; + q31_t out; + + /* acc = A0 * x[n] */ + acc = (q63_t) S->A0 * in; + + /* acc += A1 * x[n-1] */ + acc += (q63_t) S->A1 * S->state[0]; + + /* acc += A2 * x[n-2] */ + acc += (q63_t) S->A2 * S->state[1]; + + /* convert output to 1.31 format to add y[n-1] */ + out = (q31_t) (acc >> 31u); + + /* out += y[n-1] */ + out += S->state[2]; + + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; + + /* return to application */ + return (out); + + } + + /** + * @brief Process function for the Q15 PID Control. + * @param[in,out] *S points to an instance of the Q15 PID Control structure + * @param[in] in input sample to process + * @return out processed output sample. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using a 64-bit internal accumulator. + * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result. + * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format. + * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved. + * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits. + * Lastly, the accumulator is saturated to yield a result in 1.15 format. + */ + + static __INLINE q15_t arm_pid_q15( + arm_pid_instance_q15 * S, + q15_t in) + { + q63_t acc; + q15_t out; + + /* Implementation of PID controller */ + + #ifdef ARM_MATH_CM0 + + /* acc = A0 * x[n] */ + acc = ((q31_t) S->A0 )* in ; + + #else + + /* acc = A0 * x[n] */ + acc = (q31_t) __SMUAD(S->A0, in); + + #endif + + #ifdef ARM_MATH_CM0 + + /* acc += A1 * x[n-1] + A2 * x[n-2] */ + acc += (q31_t) S->A1 * S->state[0] ; + acc += (q31_t) S->A2 * S->state[1] ; + + #else + + /* acc += A1 * x[n-1] + A2 * x[n-2] */ + acc = __SMLALD(S->A1, (q31_t)__SIMD32(S->state), acc); + + #endif + + /* acc += y[n-1] */ + acc += (q31_t) S->state[2] << 15; + + /* saturate the output */ + out = (q15_t) (__SSAT((acc >> 15), 16)); + + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; + + /* return to application */ + return (out); + + } + + /** + * @} end of PID group + */ + + + /** + * @brief Floating-point matrix inverse. + * @param[in] *src points to the instance of the input floating-point matrix structure. + * @param[out] *dst points to the instance of the output floating-point matrix structure. + * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match. + * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR. + */ + + arm_status arm_mat_inverse_f32( + const arm_matrix_instance_f32 * src, + arm_matrix_instance_f32 * dst); + + + + /** + * @ingroup groupController + */ + + + /** + * @defgroup clarke Vector Clarke Transform + * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector. + * Generally the Clarke transform uses three-phase currents Ia, Ib and Ic to calculate currents + * in the two-phase orthogonal stator axis Ialpha and Ibeta. + * When Ialpha is superposed with Ia as shown in the figure below + * \image html clarke.gif Stator current space vector and its components in (a,b). + * and Ia + Ib + Ic = 0, in this condition Ialpha and Ibeta + * can be calculated using only Ia and Ib. + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html clarkeFormula.gif + * where Ia and Ib are the instantaneous stator phases and + * pIalpha and pIbeta are the two coordinates of time invariant vector. + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Clarke transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup clarke + * @{ + */ + + /** + * + * @brief Floating-point Clarke transform + * @param[in] Ia input three-phase coordinate a + * @param[in] Ib input three-phase coordinate b + * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta + * @return none. + */ + + static __INLINE void arm_clarke_f32( + float32_t Ia, + float32_t Ib, + float32_t * pIalpha, + float32_t * pIbeta) + { + /* Calculate pIalpha using the equation, pIalpha = Ia */ + *pIalpha = Ia; + + /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */ + *pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib); + + } + + /** + * @brief Clarke transform for Q31 version + * @param[in] Ia input three-phase coordinate a + * @param[in] Ib input three-phase coordinate b + * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the addition, hence there is no risk of overflow. + */ + + static __INLINE void arm_clarke_q31( + q31_t Ia, + q31_t Ib, + q31_t * pIalpha, + q31_t * pIbeta) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + + /* Calculating pIalpha from Ia by equation pIalpha = Ia */ + *pIalpha = Ia; + + /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */ + product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30); + + /* Intermediate product is calculated by (2/sqrt(3) * Ib) */ + product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30); + + /* pIbeta is calculated by adding the intermediate products */ + *pIbeta = __QADD(product1, product2); + } + + /** + * @} end of clarke group + */ + + /** + * @brief Converts the elements of the Q7 vector to Q31 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_q7_to_q31( + q7_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + + + /** + * @ingroup groupController + */ + + /** + * @defgroup inv_clarke Vector Inverse Clarke Transform + * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases. + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html clarkeInvFormula.gif + * where pIa and pIb are the instantaneous stator phases and + * Ialpha and Ibeta are the two coordinates of time invariant vector. + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Clarke transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup inv_clarke + * @{ + */ + + /** + * @brief Floating-point Inverse Clarke transform + * @param[in] Ialpha input two-phase orthogonal vector axis alpha + * @param[in] Ibeta input two-phase orthogonal vector axis beta + * @param[out] *pIa points to output three-phase coordinate a + * @param[out] *pIb points to output three-phase coordinate b + * @return none. + */ + + + static __INLINE void arm_inv_clarke_f32( + float32_t Ialpha, + float32_t Ibeta, + float32_t * pIa, + float32_t * pIb) + { + /* Calculating pIa from Ialpha by equation pIa = Ialpha */ + *pIa = Ialpha; + + /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */ + *pIb = -0.5 * Ialpha + (float32_t) 0.8660254039 *Ibeta; + + } + + /** + * @brief Inverse Clarke transform for Q31 version + * @param[in] Ialpha input two-phase orthogonal vector axis alpha + * @param[in] Ibeta input two-phase orthogonal vector axis beta + * @param[out] *pIa points to output three-phase coordinate a + * @param[out] *pIb points to output three-phase coordinate b + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the subtraction, hence there is no risk of overflow. + */ + + static __INLINE void arm_inv_clarke_q31( + q31_t Ialpha, + q31_t Ibeta, + q31_t * pIa, + q31_t * pIb) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + + /* Calculating pIa from Ialpha by equation pIa = Ialpha */ + *pIa = Ialpha; + + /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */ + product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31); + + /* Intermediate product is calculated by (1/sqrt(3) * pIb) */ + product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31); + + /* pIb is calculated by subtracting the products */ + *pIb = __QSUB(product2, product1); + + } + + /** + * @} end of inv_clarke group + */ + + /** + * @brief Converts the elements of the Q7 vector to Q15 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_q7_to_q15( + q7_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + + /** + * @ingroup groupController + */ + + /** + * @defgroup park Vector Park Transform + * + * Forward Park transform converts the input two-coordinate vector to flux and torque components. + * The Park transform can be used to realize the transformation of the Ialpha and the Ibeta currents + * from the stationary to the moving reference frame and control the spatial relationship between + * the stator vector current and rotor flux vector. + * If we consider the d axis aligned with the rotor flux, the diagram below shows the + * current vector and the relationship from the two reference frames: + * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame" + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html parkFormula.gif + * where Ialpha and Ibeta are the stator vector components, + * pId and pIq are rotor vector components and cosVal and sinVal are the + * cosine and sine values of theta (rotor flux position). + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Park transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup park + * @{ + */ + + /** + * @brief Floating-point Park transform + * @param[in] Ialpha input two-phase vector coordinate alpha + * @param[in] Ibeta input two-phase vector coordinate beta + * @param[out] *pId points to output rotor reference frame d + * @param[out] *pIq points to output rotor reference frame q + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * @return none. + * + * The function implements the forward Park transform. + * + */ + + static __INLINE void arm_park_f32( + float32_t Ialpha, + float32_t Ibeta, + float32_t * pId, + float32_t * pIq, + float32_t sinVal, + float32_t cosVal) + { + /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */ + *pId = Ialpha * cosVal + Ibeta * sinVal; + + /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */ + *pIq = -Ialpha * sinVal + Ibeta * cosVal; + + } + + /** + * @brief Park transform for Q31 version + * @param[in] Ialpha input two-phase vector coordinate alpha + * @param[in] Ibeta input two-phase vector coordinate beta + * @param[out] *pId points to output rotor reference frame d + * @param[out] *pIq points to output rotor reference frame q + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the addition and subtraction, hence there is no risk of overflow. + */ + + + static __INLINE void arm_park_q31( + q31_t Ialpha, + q31_t Ibeta, + q31_t * pId, + q31_t * pIq, + q31_t sinVal, + q31_t cosVal) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + q31_t product3, product4; /* Temporary variables used to store intermediate results */ + + /* Intermediate product is calculated by (Ialpha * cosVal) */ + product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31); + + /* Intermediate product is calculated by (Ibeta * sinVal) */ + product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31); + + + /* Intermediate product is calculated by (Ialpha * sinVal) */ + product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31); + + /* Intermediate product is calculated by (Ibeta * cosVal) */ + product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31); + + /* Calculate pId by adding the two intermediate products 1 and 2 */ + *pId = __QADD(product1, product2); + + /* Calculate pIq by subtracting the two intermediate products 3 from 4 */ + *pIq = __QSUB(product4, product3); + } + + /** + * @} end of park group + */ + + /** + * @brief Converts the elements of the Q7 vector to floating-point vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q7_to_float( + q7_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @ingroup groupController + */ + + /** + * @defgroup inv_park Vector Inverse Park transform + * Inverse Park transform converts the input flux and torque components to two-coordinate vector. + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html parkInvFormula.gif + * where pIalpha and pIbeta are the stator vector components, + * Id and Iq are rotor vector components and cosVal and sinVal are the + * cosine and sine values of theta (rotor flux position). + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Park transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup inv_park + * @{ + */ + + /** + * @brief Floating-point Inverse Park transform + * @param[in] Id input coordinate of rotor reference frame d + * @param[in] Iq input coordinate of rotor reference frame q + * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * @return none. + */ + + static __INLINE void arm_inv_park_f32( + float32_t Id, + float32_t Iq, + float32_t * pIalpha, + float32_t * pIbeta, + float32_t sinVal, + float32_t cosVal) + { + /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */ + *pIalpha = Id * cosVal - Iq * sinVal; + + /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */ + *pIbeta = Id * sinVal + Iq * cosVal; + + } + + + /** + * @brief Inverse Park transform for Q31 version + * @param[in] Id input coordinate of rotor reference frame d + * @param[in] Iq input coordinate of rotor reference frame q + * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the addition, hence there is no risk of overflow. + */ + + + static __INLINE void arm_inv_park_q31( + q31_t Id, + q31_t Iq, + q31_t * pIalpha, + q31_t * pIbeta, + q31_t sinVal, + q31_t cosVal) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + q31_t product3, product4; /* Temporary variables used to store intermediate results */ + + /* Intermediate product is calculated by (Id * cosVal) */ + product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31); + + /* Intermediate product is calculated by (Iq * sinVal) */ + product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31); + + + /* Intermediate product is calculated by (Id * sinVal) */ + product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31); + + /* Intermediate product is calculated by (Iq * cosVal) */ + product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31); + + /* Calculate pIalpha by using the two intermediate products 1 and 2 */ + *pIalpha = __QSUB(product1, product2); + + /* Calculate pIbeta by using the two intermediate products 3 and 4 */ + *pIbeta = __QADD(product4, product3); + + } + + /** + * @} end of Inverse park group + */ + + + /** + * @brief Converts the elements of the Q31 vector to floating-point vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q31_to_float( + q31_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @ingroup groupInterpolation + */ + + /** + * @defgroup LinearInterpolate Linear Interpolation + * + * Linear interpolation is a method of curve fitting using linear polynomials. + * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line + * + * \par + * \image html LinearInterp.gif "Linear interpolation" + * + * \par + * A Linear Interpolate function calculates an output value(y), for the input(x) + * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values) + * + * \par Algorithm: + * 
+   *       y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+   *       where x0, x1 are nearest values of input x
+   *             y0, y1 are nearest values to output y
+   *
+ * + * \par + * This set of functions implements Linear interpolation process + * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single + * sample of data and each call to the function returns a single processed value. + * S points to an instance of the Linear Interpolate function data structure. + * x is the input sample value. The functions returns the output value. + * + * \par + * if x is outside of the table boundary, Linear interpolation returns first value of the table + * if x is below input range and returns last value of table if x is above range. + */ + + /** + * @addtogroup LinearInterpolate + * @{ + */ + + /** + * @brief Process function for the floating-point Linear Interpolation Function. + * @param[in,out] *S is an instance of the floating-point Linear Interpolation structure + * @param[in] x input sample to process + * @return y processed output sample. + * + */ + + static __INLINE float32_t arm_linear_interp_f32( + arm_linear_interp_instance_f32 * S, + float32_t x) + { + + float32_t y; + float32_t x0, x1; /* Nearest input values */ + float32_t y0, y1; /* Nearest output values */ + float32_t xSpacing = S->xSpacing; /* spacing between input values */ + int32_t i; /* Index variable */ + float32_t *pYData = S->pYData; /* pointer to output table */ + + /* Calculation of index */ + i = (x - S->x1) / xSpacing; + + if(i < 0) + { + /* Iniatilize output for below specified range as least output value of table */ + y = pYData[0]; + } + else if(i >= S->nValues) + { + /* Iniatilize output for above specified range as last output value of table */ + y = pYData[S->nValues-1]; + } + else + { + /* Calculation of nearest input values */ + x0 = S->x1 + i * xSpacing; + x1 = S->x1 + (i +1) * xSpacing; + + /* Read of nearest output values */ + y0 = pYData[i]; + y1 = pYData[i + 1]; + + /* Calculation of output */ + y = y0 + (x - x0) * ((y1 - y0)/(x1-x0)); + + } + + /* returns output value */ + return (y); + } + + /** + * + * @brief Process function for the Q31 Linear Interpolation Function. + * @param[in] *pYData pointer to Q31 Linear Interpolation table + * @param[in] x input sample to process + * @param[in] nValues number of table values + * @return y processed output sample. + * + * \par + * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. + * This function can support maximum of table size 2^12. + * + */ + + + static __INLINE q31_t arm_linear_interp_q31(q31_t *pYData, + q31_t x, uint32_t nValues) + { + q31_t y; /* output */ + q31_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + int32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + index = ((x & 0xFFF00000) >> 20); + + if(index >= (nValues - 1)) + { + return(pYData[nValues - 1]); + } + else if(index < 0) + { + return(pYData[0]); + } + else + { + + /* 20 bits for the fractional part */ + /* shift left by 11 to keep fract in 1.31 format */ + fract = (x & 0x000FFFFF) << 11; + + /* Read two nearest output values from the index in 1.31(q31) format */ + y0 = pYData[index]; + y1 = pYData[index + 1u]; + + /* Calculation of y0 * (1-fract) and y is in 2.30 format */ + y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32)); + + /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */ + y += ((q31_t) (((q63_t) y1 * fract) >> 32)); + + /* Convert y to 1.31 format */ + return (y << 1u); + + } + + } + + /** + * + * @brief Process function for the Q15 Linear Interpolation Function. + * @param[in] *pYData pointer to Q15 Linear Interpolation table + * @param[in] x input sample to process + * @param[in] nValues number of table values + * @return y processed output sample. + * + * \par + * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. + * This function can support maximum of table size 2^12. + * + */ + + + static __INLINE q15_t arm_linear_interp_q15(q15_t *pYData, q31_t x, uint32_t nValues) + { + q63_t y; /* output */ + q15_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + int32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + index = ((x & 0xFFF00000) >> 20u); + + if(index >= (nValues - 1)) + { + return(pYData[nValues - 1]); + } + else if(index < 0) + { + return(pYData[0]); + } + else + { + /* 20 bits for the fractional part */ + /* fract is in 12.20 format */ + fract = (x & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y0 = pYData[index]; + y1 = pYData[index + 1u]; + + /* Calculation of y0 * (1-fract) and y is in 13.35 format */ + y = ((q63_t) y0 * (0xFFFFF - fract)); + + /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */ + y += ((q63_t) y1 * (fract)); + + /* convert y to 1.15 format */ + return (y >> 20); + } + + + } + + /** + * + * @brief Process function for the Q7 Linear Interpolation Function. + * @param[in] *pYData pointer to Q7 Linear Interpolation table + * @param[in] x input sample to process + * @param[in] nValues number of table values + * @return y processed output sample. + * + * \par + * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. + * This function can support maximum of table size 2^12. + */ + + + static __INLINE q7_t arm_linear_interp_q7(q7_t *pYData, q31_t x, uint32_t nValues) + { + q31_t y; /* output */ + q7_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + int32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + index = ((x & 0xFFF00000) >> 20u); + + + if(index >= (nValues - 1)) + { + return(pYData[nValues - 1]); + } + else if(index < 0) + { + return(pYData[0]); + } + else + { + + /* 20 bits for the fractional part */ + /* fract is in 12.20 format */ + fract = (x & 0x000FFFFF); + + /* Read two nearest output values from the index and are in 1.7(q7) format */ + y0 = pYData[index]; + y1 = pYData[index + 1u]; + + /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */ + y = ((y0 * (0xFFFFF - fract))); + + /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */ + y += (y1 * fract); + + /* convert y to 1.7(q7) format */ + return (y >> 20u); + + } + + } + /** + * @} end of LinearInterpolate group + */ + + /** + * @brief Fast approximation to the trigonometric sine function for floating-point data. + * @param[in] x input value in radians. + * @return sin(x). + */ + + float32_t arm_sin_f32( + float32_t x); + + /** + * @brief Fast approximation to the trigonometric sine function for Q31 data. + * @param[in] x Scaled input value in radians. + * @return sin(x). + */ + + q31_t arm_sin_q31( + q31_t x); + + /** + * @brief Fast approximation to the trigonometric sine function for Q15 data. + * @param[in] x Scaled input value in radians. + * @return sin(x). + */ + + q15_t arm_sin_q15( + q15_t x); + + /** + * @brief Fast approximation to the trigonometric cosine function for floating-point data. + * @param[in] x input value in radians. + * @return cos(x). + */ + + float32_t arm_cos_f32( + float32_t x); + + /** + * @brief Fast approximation to the trigonometric cosine function for Q31 data. + * @param[in] x Scaled input value in radians. + * @return cos(x). + */ + + q31_t arm_cos_q31( + q31_t x); + + /** + * @brief Fast approximation to the trigonometric cosine function for Q15 data. + * @param[in] x Scaled input value in radians. + * @return cos(x). + */ + + q15_t arm_cos_q15( + q15_t x); + + + /** + * @ingroup groupFastMath + */ + + + /** + * @defgroup SQRT Square Root + * + * Computes the square root of a number. + * There are separate functions for Q15, Q31, and floating-point data types. + * The square root function is computed using the Newton-Raphson algorithm. + * This is an iterative algorithm of the form: + * 
+   *      x1 = x0 - f(x0)/f'(x0)
+   *
+ * where x1 is the current estimate, + * x0 is the previous estimate and + * f'(x0) is the derivative of f() evaluated at x0. + * For the square root function, the algorithm reduces to: + * 
+   *     x0 = in/2                         [initial guess]
+   *     x1 = 1/2 * ( x0 + in / x0)        [each iteration]
+   *
+ */ + + + /** + * @addtogroup SQRT + * @{ + */ + + /** + * @brief Floating-point square root function. + * @param[in] in input value. + * @param[out] *pOut square root of input value. + * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if + * in is negative value and returns zero output for negative values. + */ + + static __INLINE arm_status arm_sqrt_f32( + float32_t in, float32_t *pOut) + { + if(in > 0) + { + +// #if __FPU_USED + #if (__FPU_USED == 1) && defined ( __CC_ARM ) + *pOut = __sqrtf(in); + #else + *pOut = sqrtf(in); + #endif + + return (ARM_MATH_SUCCESS); + } + else + { + *pOut = 0.0f; + return (ARM_MATH_ARGUMENT_ERROR); + } + + } + + + /** + * @brief Q31 square root function. + * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF. + * @param[out] *pOut square root of input value. + * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if + * in is negative value and returns zero output for negative values. + */ + arm_status arm_sqrt_q31( + q31_t in, q31_t *pOut); + + /** + * @brief Q15 square root function. + * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF. + * @param[out] *pOut square root of input value. + * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if + * in is negative value and returns zero output for negative values. + */ + arm_status arm_sqrt_q15( + q15_t in, q15_t *pOut); + + /** + * @} end of SQRT group + */ + + + + + + + /** + * @brief floating-point Circular write function. + */ + + static __INLINE void arm_circularWrite_f32( + int32_t * circBuffer, + int32_t L, + uint16_t * writeOffset, + int32_t bufferInc, + const int32_t * src, + int32_t srcInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t wOffset; + + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if(wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = wOffset; + } + + + + /** + * @brief floating-point Circular Read function. + */ + static __INLINE void arm_circularRead_f32( + int32_t * circBuffer, + int32_t L, + int32_t * readOffset, + int32_t bufferInc, + int32_t * dst, + int32_t * dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t rOffset, dst_end; + + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + dst_end = (int32_t) (dst_base + dst_length); + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; + + /* Update the input pointer */ + dst += dstInc; + + if(dst == (int32_t *) dst_end) + { + dst = dst_base; + } + + /* Circularly update rOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if(rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; + } + + /** + * @brief Q15 Circular write function. + */ + + static __INLINE void arm_circularWrite_q15( + q15_t * circBuffer, + int32_t L, + uint16_t * writeOffset, + int32_t bufferInc, + const q15_t * src, + int32_t srcInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t wOffset; + + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if(wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = wOffset; + } + + + + /** + * @brief Q15 Circular Read function. + */ + static __INLINE void arm_circularRead_q15( + q15_t * circBuffer, + int32_t L, + int32_t * readOffset, + int32_t bufferInc, + q15_t * dst, + q15_t * dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) + { + uint32_t i = 0; + int32_t rOffset, dst_end; + + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + + dst_end = (int32_t) (dst_base + dst_length); + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; + + /* Update the input pointer */ + dst += dstInc; + + if(dst == (q15_t *) dst_end) + { + dst = dst_base; + } + + /* Circularly update wOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if(rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; + } + + + /** + * @brief Q7 Circular write function. + */ + + static __INLINE void arm_circularWrite_q7( + q7_t * circBuffer, + int32_t L, + uint16_t * writeOffset, + int32_t bufferInc, + const q7_t * src, + int32_t srcInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t wOffset; + + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if(wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = wOffset; + } + + + + /** + * @brief Q7 Circular Read function. + */ + static __INLINE void arm_circularRead_q7( + q7_t * circBuffer, + int32_t L, + int32_t * readOffset, + int32_t bufferInc, + q7_t * dst, + q7_t * dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) + { + uint32_t i = 0; + int32_t rOffset, dst_end; + + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + + dst_end = (int32_t) (dst_base + dst_length); + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; + + /* Update the input pointer */ + dst += dstInc; + + if(dst == (q7_t *) dst_end) + { + dst = dst_base; + } + + /* Circularly update rOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if(rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; + } + + + /** + * @brief Sum of the squares of the elements of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_power_q31( + q31_t * pSrc, + uint32_t blockSize, + q63_t * pResult); + + /** + * @brief Sum of the squares of the elements of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_power_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Sum of the squares of the elements of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_power_q15( + q15_t * pSrc, + uint32_t blockSize, + q63_t * pResult); + + /** + * @brief Sum of the squares of the elements of a Q7 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_power_q7( + q7_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Mean value of a Q7 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_mean_q7( + q7_t * pSrc, + uint32_t blockSize, + q7_t * pResult); + + /** + * @brief Mean value of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + void arm_mean_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + /** + * @brief Mean value of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + void arm_mean_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Mean value of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + void arm_mean_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Variance of the elements of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_var_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Variance of the elements of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_var_q31( + q31_t * pSrc, + uint32_t blockSize, + q63_t * pResult); + + /** + * @brief Variance of the elements of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_var_q15( + q15_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Root Mean Square of the elements of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_rms_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Root Mean Square of the elements of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_rms_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Root Mean Square of the elements of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_rms_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + /** + * @brief Standard deviation of the elements of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_std_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Standard deviation of the elements of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_std_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Standard deviation of the elements of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_std_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + /** + * @brief Floating-point complex magnitude + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t numSamples); + + /** + * @brief Q31 complex magnitude + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t numSamples); + + /** + * @brief Q15 complex magnitude + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t numSamples); + + /** + * @brief Q15 complex dot product + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] numSamples number of complex samples in each vector + * @param[out] *realResult real part of the result returned here + * @param[out] *imagResult imaginary part of the result returned here + * @return none. + */ + + void arm_cmplx_dot_prod_q15( + q15_t * pSrcA, + q15_t * pSrcB, + uint32_t numSamples, + q31_t * realResult, + q31_t * imagResult); + + /** + * @brief Q31 complex dot product + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] numSamples number of complex samples in each vector + * @param[out] *realResult real part of the result returned here + * @param[out] *imagResult imaginary part of the result returned here + * @return none. + */ + + void arm_cmplx_dot_prod_q31( + q31_t * pSrcA, + q31_t * pSrcB, + uint32_t numSamples, + q63_t * realResult, + q63_t * imagResult); + + /** + * @brief Floating-point complex dot product + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] numSamples number of complex samples in each vector + * @param[out] *realResult real part of the result returned here + * @param[out] *imagResult imaginary part of the result returned here + * @return none. + */ + + void arm_cmplx_dot_prod_f32( + float32_t * pSrcA, + float32_t * pSrcB, + uint32_t numSamples, + float32_t * realResult, + float32_t * imagResult); + + /** + * @brief Q15 complex-by-real multiplication + * @param[in] *pSrcCmplx points to the complex input vector + * @param[in] *pSrcReal points to the real input vector + * @param[out] *pCmplxDst points to the complex output vector + * @param[in] numSamples number of samples in each vector + * @return none. + */ + + void arm_cmplx_mult_real_q15( + q15_t * pSrcCmplx, + q15_t * pSrcReal, + q15_t * pCmplxDst, + uint32_t numSamples); + + /** + * @brief Q31 complex-by-real multiplication + * @param[in] *pSrcCmplx points to the complex input vector + * @param[in] *pSrcReal points to the real input vector + * @param[out] *pCmplxDst points to the complex output vector + * @param[in] numSamples number of samples in each vector + * @return none. + */ + + void arm_cmplx_mult_real_q31( + q31_t * pSrcCmplx, + q31_t * pSrcReal, + q31_t * pCmplxDst, + uint32_t numSamples); + + /** + * @brief Floating-point complex-by-real multiplication + * @param[in] *pSrcCmplx points to the complex input vector + * @param[in] *pSrcReal points to the real input vector + * @param[out] *pCmplxDst points to the complex output vector + * @param[in] numSamples number of samples in each vector + * @return none. + */ + + void arm_cmplx_mult_real_f32( + float32_t * pSrcCmplx, + float32_t * pSrcReal, + float32_t * pCmplxDst, + uint32_t numSamples); + + /** + * @brief Minimum value of a Q7 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *result is output pointer + * @param[in] index is the array index of the minimum value in the input buffer. + * @return none. + */ + + void arm_min_q7( + q7_t * pSrc, + uint32_t blockSize, + q7_t * result, + uint32_t * index); + + /** + * @brief Minimum value of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output pointer + * @param[in] *pIndex is the array index of the minimum value in the input buffer. + * @return none. + */ + + void arm_min_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult, + uint32_t * pIndex); + + /** + * @brief Minimum value of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output pointer + * @param[out] *pIndex is the array index of the minimum value in the input buffer. + * @return none. + */ + void arm_min_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult, + uint32_t * pIndex); + + /** + * @brief Minimum value of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output pointer + * @param[out] *pIndex is the array index of the minimum value in the input buffer. + * @return none. + */ + + void arm_min_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult, + uint32_t * pIndex); + +/** + * @brief Maximum value of a Q7 vector. + * @param[in] *pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] *pResult maximum value returned here + * @param[out] *pIndex index of maximum value returned here + * @return none. + */ + + void arm_max_q7( + q7_t * pSrc, + uint32_t blockSize, + q7_t * pResult, + uint32_t * pIndex); + +/** + * @brief Maximum value of a Q15 vector. + * @param[in] *pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] *pResult maximum value returned here + * @param[out] *pIndex index of maximum value returned here + * @return none. + */ + + void arm_max_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult, + uint32_t * pIndex); + +/** + * @brief Maximum value of a Q31 vector. + * @param[in] *pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] *pResult maximum value returned here + * @param[out] *pIndex index of maximum value returned here + * @return none. + */ + + void arm_max_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult, + uint32_t * pIndex); + +/** + * @brief Maximum value of a floating-point vector. + * @param[in] *pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] *pResult maximum value returned here + * @param[out] *pIndex index of maximum value returned here + * @return none. + */ + + void arm_max_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult, + uint32_t * pIndex); + + /** + * @brief Q15 complex-by-complex multiplication + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_mult_cmplx_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t numSamples); + + /** + * @brief Q31 complex-by-complex multiplication + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_mult_cmplx_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t numSamples); + + /** + * @brief Floating-point complex-by-complex multiplication + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_mult_cmplx_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t numSamples); + + /** + * @brief Converts the elements of the floating-point vector to Q31 vector. + * @param[in] *pSrc points to the floating-point input vector + * @param[out] *pDst points to the Q31 output vector + * @param[in] blockSize length of the input vector + * @return none. + */ + void arm_float_to_q31( + float32_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Converts the elements of the floating-point vector to Q15 vector. + * @param[in] *pSrc points to the floating-point input vector + * @param[out] *pDst points to the Q15 output vector + * @param[in] blockSize length of the input vector + * @return none + */ + void arm_float_to_q15( + float32_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Converts the elements of the floating-point vector to Q7 vector. + * @param[in] *pSrc points to the floating-point input vector + * @param[out] *pDst points to the Q7 output vector + * @param[in] blockSize length of the input vector + * @return none + */ + void arm_float_to_q7( + float32_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q31 vector to Q15 vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q31_to_q15( + q31_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Converts the elements of the Q31 vector to Q7 vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q31_to_q7( + q31_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Converts the elements of the Q15 vector to floating-point vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q15_to_float( + q15_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q15 vector to Q31 vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q15_to_q31( + q15_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q15 vector to Q7 vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q15_to_q7( + q15_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @ingroup groupInterpolation + */ + + /** + * @defgroup BilinearInterpolate Bilinear Interpolation + * + * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid. + * The underlying function f(x, y) is sampled on a regular grid and the interpolation process + * determines values between the grid points. + * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension. + * Bilinear interpolation is often used in image processing to rescale images. + * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types. + * + * Algorithm + * \par + * The instance structure used by the bilinear interpolation functions describes a two dimensional data table. + * For floating-point, the instance structure is defined as: + * 
+   *   typedef struct
+   *   {
+   *     uint16_t numRows;
+   *     uint16_t numCols;
+   *     float32_t *pData;
+   * } arm_bilinear_interp_instance_f32;
+   *
+ * + * \par + * where numRows specifies the number of rows in the table; + * numCols specifies the number of columns in the table; + * and pData points to an array of size numRows*numCols values. + * The data table pTable is organized in row order and the supplied data values fall on integer indexes. + * That is, table element (x,y) is located at pTable[x + y*numCols] where x and y are integers. + * + * \par + * Let (x, y) specify the desired interpolation point. Then define: + * 
+   *     XF = floor(x)
+   *     YF = floor(y)
+   *
+ * \par + * The interpolated output point is computed as: + * 
+   *  f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+   *           + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+   *           + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+   *           + f(XF+1, YF+1) * (x-XF)*(y-YF)
+   *
+ * Note that the coordinates (x, y) contain integer and fractional components. + * The integer components specify which portion of the table to use while the + * fractional components control the interpolation processor. + * + * \par + * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output. + */ + + /** + * @addtogroup BilinearInterpolate + * @{ + */ + + /** + * + * @brief Floating-point bilinear interpolation. + * @param[in,out] *S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate. + * @param[in] Y interpolation coordinate. + * @return out interpolated value. + */ + + + static __INLINE float32_t arm_bilinear_interp_f32( + const arm_bilinear_interp_instance_f32 * S, + float32_t X, + float32_t Y) + { + float32_t out; + float32_t f00, f01, f10, f11; + float32_t *pData = S->pData; + int32_t xIndex, yIndex, index; + float32_t xdiff, ydiff; + float32_t b1, b2, b3, b4; + + xIndex = (int32_t) X; + yIndex = (int32_t) Y; + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(xIndex < 0 || xIndex > (S->numRows-1) || yIndex < 0 || yIndex > ( S->numCols-1)) + { + return(0); + } + + /* Calculation of index for two nearest points in X-direction */ + index = (xIndex - 1) + (yIndex-1) * S->numCols ; + + + /* Read two nearest points in X-direction */ + f00 = pData[index]; + f01 = pData[index + 1]; + + /* Calculation of index for two nearest points in Y-direction */ + index = (xIndex-1) + (yIndex) * S->numCols; + + + /* Read two nearest points in Y-direction */ + f10 = pData[index]; + f11 = pData[index + 1]; + + /* Calculation of intermediate values */ + b1 = f00; + b2 = f01 - f00; + b3 = f10 - f00; + b4 = f00 - f01 - f10 + f11; + + /* Calculation of fractional part in X */ + xdiff = X - xIndex; + + /* Calculation of fractional part in Y */ + ydiff = Y - yIndex; + + /* Calculation of bi-linear interpolated output */ + out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff; + + /* return to application */ + return (out); + + } + + /** + * + * @brief Q31 bilinear interpolation. + * @param[in,out] *S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate in 12.20 format. + * @param[in] Y interpolation coordinate in 12.20 format. + * @return out interpolated value. + */ + + static __INLINE q31_t arm_bilinear_interp_q31( + arm_bilinear_interp_instance_q31 * S, + q31_t X, + q31_t Y) + { + q31_t out; /* Temporary output */ + q31_t acc = 0; /* output */ + q31_t xfract, yfract; /* X, Y fractional parts */ + q31_t x1, x2, y1, y2; /* Nearest output values */ + int32_t rI, cI; /* Row and column indices */ + q31_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & 0xFFF00000) >> 20u); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & 0xFFF00000) >> 20u); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(rI < 0 || rI > (S->numRows-1) || cI < 0 || cI > ( S->numCols-1)) + { + return(0); + } + + /* 20 bits for the fractional part */ + /* shift left xfract by 11 to keep 1.31 format */ + xfract = (X & 0x000FFFFF) << 11u; + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + nCols * (cI)]; + x2 = pYData[(rI) + nCols * (cI) + 1u]; + + /* 20 bits for the fractional part */ + /* shift left yfract by 11 to keep 1.31 format */ + yfract = (Y & 0x000FFFFF) << 11u; + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + nCols * (cI + 1)]; + y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */ + out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32)); + acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32)); + + /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32)); + acc += ((q31_t) ((q63_t) out * (xfract) >> 32)); + + /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32)); + acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); + + /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t) ((q63_t) y2 * (xfract) >> 32)); + acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); + + /* Convert acc to 1.31(q31) format */ + return (acc << 2u); + + } + + /** + * @brief Q15 bilinear interpolation. + * @param[in,out] *S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate in 12.20 format. + * @param[in] Y interpolation coordinate in 12.20 format. + * @return out interpolated value. + */ + + static __INLINE q15_t arm_bilinear_interp_q15( + arm_bilinear_interp_instance_q15 * S, + q31_t X, + q31_t Y) + { + q63_t acc = 0; /* output */ + q31_t out; /* Temporary output */ + q15_t x1, x2, y1, y2; /* Nearest output values */ + q31_t xfract, yfract; /* X, Y fractional parts */ + int32_t rI, cI; /* Row and column indices */ + q15_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & 0xFFF00000) >> 20); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & 0xFFF00000) >> 20); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(rI < 0 || rI > (S->numRows-1) || cI < 0 || cI > ( S->numCols-1)) + { + return(0); + } + + /* 20 bits for the fractional part */ + /* xfract should be in 12.20 format */ + xfract = (X & 0x000FFFFF); + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + nCols * (cI)]; + x2 = pYData[(rI) + nCols * (cI) + 1u]; + + + /* 20 bits for the fractional part */ + /* yfract should be in 12.20 format */ + yfract = (Y & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + nCols * (cI + 1)]; + y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */ + + /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */ + /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */ + out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u); + acc = ((q63_t) out * (0xFFFFF - yfract)); + + /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */ + out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u); + acc += ((q63_t) out * (xfract)); + + /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */ + out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u); + acc += ((q63_t) out * (yfract)); + + /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */ + out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u); + acc += ((q63_t) out * (yfract)); + + /* acc is in 13.51 format and down shift acc by 36 times */ + /* Convert out to 1.15 format */ + return (acc >> 36); + + } + + /** + * @brief Q7 bilinear interpolation. + * @param[in,out] *S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate in 12.20 format. + * @param[in] Y interpolation coordinate in 12.20 format. + * @return out interpolated value. + */ + + static __INLINE q7_t arm_bilinear_interp_q7( + arm_bilinear_interp_instance_q7 * S, + q31_t X, + q31_t Y) + { + q63_t acc = 0; /* output */ + q31_t out; /* Temporary output */ + q31_t xfract, yfract; /* X, Y fractional parts */ + q7_t x1, x2, y1, y2; /* Nearest output values */ + int32_t rI, cI; /* Row and column indices */ + q7_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & 0xFFF00000) >> 20); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & 0xFFF00000) >> 20); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(rI < 0 || rI > (S->numRows-1) || cI < 0 || cI > ( S->numCols-1)) + { + return(0); + } + + /* 20 bits for the fractional part */ + /* xfract should be in 12.20 format */ + xfract = (X & 0x000FFFFF); + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + nCols * (cI)]; + x2 = pYData[(rI) + nCols * (cI) + 1u]; + + + /* 20 bits for the fractional part */ + /* yfract should be in 12.20 format */ + yfract = (Y & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + nCols * (cI + 1)]; + y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */ + out = ((x1 * (0xFFFFF - xfract))); + acc = (((q63_t) out * (0xFFFFF - yfract))); + + /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */ + out = ((x2 * (0xFFFFF - yfract))); + acc += (((q63_t) out * (xfract))); + + /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */ + out = ((y1 * (0xFFFFF - xfract))); + acc += (((q63_t) out * (yfract))); + + /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */ + out = ((y2 * (yfract))); + acc += (((q63_t) out * (xfract))); + + /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */ + return (acc >> 40); + + } + + /** + * @} end of BilinearInterpolate group + */ + + + + + + +#ifdef __cplusplus +} +#endif + + +#endif /* _ARM_MATH_H */ + + +/** + * + * End of file. + */ diff --git a/car_llvmkot/src/lib/cmsis/core_cm0.h b/car_llvmkot/src/lib/cmsis/core_cm0.h new file mode 100644 index 00000000000..edd522173e1 --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/core_cm0.h @@ -0,0 +1,665 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V2.10 + * @date 19. July 2011 + * + * @note + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + + +/** \mainpage CMSIS Cortex-M0 + + This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer. + It consists of: + + - Cortex-M Core Register Definitions + - Cortex-M functions + - Cortex-M instructions + + The CMSIS Cortex-M0 Core Peripheral Access Layer contains C and assembly functions that ease + access to the Cortex-M Core + */ + +/** \defgroup CMSIS_MISRA_Exceptions CMSIS MISRA-C:2004 Compliance Exceptions + CMSIS violates following MISRA-C2004 Rules: + + - Violates MISRA 2004 Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + - Violates MISRA 2004 Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + - Violates MISRA 2004 Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \defgroup CMSIS_core_definitions CMSIS Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core + - Cortex-M core Revision Number + @{ + */ + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x00) /*!< Cortex core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + +/*!< __FPU_USED to be checked prior to making use of FPU specific registers and functions */ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + /* add preprocessor checks */ +#endif + +#include /*!< standard types definitions */ +#include "core_cmInstr.h" /*!< Core Instruction Access */ +#include "core_cmFunc.h" /*!< Core Function Access */ + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000 + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + +/*@} end of group CMSIS_core_definitions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** \defgroup CMSIS_core_register CMSIS Core Register + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE CMSIS Core + Type definitions for the Cortex-M Core Registers + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC CMSIS NVIC + Type definitions for the Cortex-M NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31]; + __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31]; + __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31]; + __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31]; + uint32_t RESERVED4[64]; + __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB CMSIS SCB + Type definitions for the Cortex-M System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick CMSIS SysTick + Type definitions for the Cortex-M System Timer Registers + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug CMSIS Core Debug + Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP + and not via processor. Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + @{ + */ + +/* Memory mapping of Cortex-M0 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions + @{ + */ + +/* Interrupt Priorities are WORD accessible only under ARMv6M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 ) +#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) ) +#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) ) + + +/** \brief Enable External Interrupt + + This function enables a device specific interrupt in the NVIC interrupt controller. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the external interrupt to enable + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Disable External Interrupt + + This function disables a device specific interrupt in the NVIC interrupt controller. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the external interrupt to disable + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Get Pending Interrupt + + This function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Number of the interrupt for get pending + \return 0 Interrupt status is not pending + \return 1 Interrupt status is pending + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + + +/** \brief Set Pending Interrupt + + This function sets the pending bit for the specified interrupt. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the interrupt for set pending + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Clear Pending Interrupt + + This function clears the pending bit for the specified interrupt. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the interrupt for clear pending + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Set Interrupt Priority + + This function sets the priority for the specified interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + Note: The priority cannot be set for every core interrupt. + + \param [in] IRQn Number of the interrupt for set priority + \param [in] priority Priority to set + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } + else { + NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } +} + + +/** \brief Get Interrupt Priority + + This function reads the priority for the specified interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + The returned priority value is automatically aligned to the implemented + priority bits of the microcontroller. + + \param [in] IRQn Number of the interrupt for get priority + \return Interrupt Priority + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */ + else { + return((uint32_t)((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief System Reset + + This function initiate a system reset request to reset the MCU. + */ +static __INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + This function initialises the system tick timer and its interrupt and start the system tick timer. + Counter is in free running mode to generate periodical interrupts. + + \param [in] ticks Number of ticks between two interrupts + \return 0 Function succeeded + \return 1 Function failed + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/car_llvmkot/src/lib/cmsis/core_cm3.h b/car_llvmkot/src/lib/cmsis/core_cm3.h new file mode 100644 index 00000000000..c15e10ae2c5 --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/core_cm3.h @@ -0,0 +1,1236 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V2.10 + * @date 19. July 2011 + * + * @note + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + + +/** \mainpage CMSIS Cortex-M3 + + This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer. + It consists of: + + - Cortex-M Core Register Definitions + - Cortex-M functions + - Cortex-M instructions + + The CMSIS Cortex-M3 Core Peripheral Access Layer contains C and assembly functions that ease + access to the Cortex-M Core + */ + +/** \defgroup CMSIS_MISRA_Exceptions CMSIS MISRA-C:2004 Compliance Exceptions + CMSIS violates following MISRA-C2004 Rules: + + - Violates MISRA 2004 Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + - Violates MISRA 2004 Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + - Violates MISRA 2004 Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \defgroup CMSIS_core_definitions CMSIS Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core + - Cortex-M core Revision Number + @{ + */ + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + +/*!< __FPU_USED to be checked prior to making use of FPU specific registers and functions */ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + /* add preprocessor checks */ +#endif + +#include /*!< standard types definitions */ +#include "core_cmInstr.h" /*!< Core Instruction Access */ +#include "core_cmFunc.h" /*!< Core Function Access */ + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200 + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0 + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + +/*@} end of group CMSIS_core_definitions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** \defgroup CMSIS_core_register CMSIS Core Register + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE CMSIS Core + Type definitions for the Cortex-M Core Registers + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC CMSIS NVIC + Type definitions for the Cortex-M NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB CMSIS SCB + Type definitions for the Cortex-M System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5]; + __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB CMSIS System Control and ID Register not in the SCB + Type definitions for the Cortex-M System Control and ID Register not in the SCB + @{ + */ + +/** \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1]; + __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) + __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick CMSIS SysTick + Type definitions for the Cortex-M System Timer Registers + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_ITM CMSIS ITM + Type definitions for the Cortex-M Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_TXENA_Pos 3 /*!< ITM TCR: TXENA Position */ +#define ITM_TCR_TXENA_Msk (1UL << ITM_TCR_TXENA_Pos) /*!< ITM TCR: TXENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +#if (__MPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_MPU CMSIS MPU + Type definitions for the Cortex-M Memory Protection Unit (MPU) + @{ + */ + +/** \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug CMSIS Core Debug + Type definitions for the Cortex-M Core Debug Registers + @{ + */ + +/** \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + @{ + */ + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions + @{ + */ + +/** \brief Set Priority Grouping + + This function sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + + \param [in] PriorityGroup Priority grouping field + */ +static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** \brief Get Priority Grouping + + This function gets the priority grouping from NVIC Interrupt Controller. + Priority grouping is SCB->AIRCR [10:8] PRIGROUP field. + + \return Priority grouping field + */ +static __INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + + +/** \brief Enable External Interrupt + + This function enables a device specific interrupt in the NVIC interrupt controller. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the external interrupt to enable + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + + +/** \brief Disable External Interrupt + + This function disables a device specific interrupt in the NVIC interrupt controller. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the external interrupt to disable + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + + +/** \brief Get Pending Interrupt + + This function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Number of the interrupt for get pending + \return 0 Interrupt status is not pending + \return 1 Interrupt status is pending + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + + +/** \brief Set Pending Interrupt + + This function sets the pending bit for the specified interrupt. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the interrupt for set pending + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + + +/** \brief Clear Pending Interrupt + + This function clears the pending bit for the specified interrupt. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the interrupt for clear pending + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Get Active Interrupt + + This function reads the active register in NVIC and returns the active bit. + \param [in] IRQn Number of the interrupt for get active + \return 0 Interrupt status is not active + \return 1 Interrupt status is active + */ +static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + + +/** \brief Set Interrupt Priority + + This function sets the priority for the specified interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + Note: The priority cannot be set for every core interrupt. + + \param [in] IRQn Number of the interrupt for set priority + \param [in] priority Priority to set + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + + +/** \brief Get Interrupt Priority + + This function reads the priority for the specified interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + The returned priority value is automatically aligned to the implemented + priority bits of the microcontroller. + + \param [in] IRQn Number of the interrupt for get priority + \return Interrupt Priority + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief Encode Priority + + This function encodes the priority for an interrupt with the given priority group, + preemptive priority value and sub priority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + + The returned priority value can be used for NVIC_SetPriority(...) function + + \param [in] PriorityGroup Used priority group + \param [in] PreemptPriority Preemptive priority value (starting from 0) + \param [in] SubPriority Sub priority value (starting from 0) + \return Encoded priority for the interrupt + */ +static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** \brief Decode Priority + + This function decodes an interrupt priority value with the given priority group to + preemptive priority value and sub priority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + + The priority value can be retrieved with NVIC_GetPriority(...) function + + \param [in] Priority Priority value + \param [in] PriorityGroup Used priority group + \param [out] pPreemptPriority Preemptive priority value (starting from 0) + \param [out] pSubPriority Sub priority value (starting from 0) + */ +static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + +/** \brief System Reset + + This function initiate a system reset request to reset the MCU. + */ +static __INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + This function initialises the system tick timer and its interrupt and start the system tick timer. + Counter is in free running mode to generate periodical interrupts. + + \param [in] ticks Number of ticks between two interrupts + \return 0 Function succeeded + \return 1 Function failed + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions CMSIS Core Debug Functions + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< external variable to receive characters */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */ + + +/** \brief ITM Send Character + + This function transmits a character via the ITM channel 0. + It just returns when no debugger is connected that has booked the output. + It is blocking when a debugger is connected, but the previous character send is not transmitted. + + \param [in] ch Character to transmit + \return Character to transmit + */ +static __INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */ + (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** \brief ITM Receive Character + + This function inputs a character via external variable ITM_RxBuffer. + It just returns when no debugger is connected that has booked the output. + It is blocking when a debugger is connected, but the previous character send is not transmitted. + + \return Received character + \return -1 No character received + */ +static __INLINE int32_t ITM_ReceiveChar (void) { + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** \brief ITM Check Character + + This function checks external variable ITM_RxBuffer whether a character is available or not. + It returns '1' if a character is available and '0' if no character is available. + + \return 0 No character available + \return 1 Character available + */ +static __INLINE int32_t ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/car_llvmkot/src/lib/cmsis/core_cm4.h b/car_llvmkot/src/lib/cmsis/core_cm4.h new file mode 100644 index 00000000000..76bf8292a97 --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/core_cm4.h @@ -0,0 +1,1378 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V2.10 + * @date 19. July 2011 + * + * @note + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + + +/** \mainpage CMSIS Cortex-M4 + + This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer. + It consists of: + + - Cortex-M Core Register Definitions + - Cortex-M functions + - Cortex-M instructions + - Cortex-M SIMD instructions + + The CMSIS Cortex-M4 Core Peripheral Access Layer contains C and assembly functions that ease + access to the Cortex-M Core + */ + +/** \defgroup CMSIS_MISRA_Exceptions CMSIS MISRA-C:2004 Compliance Exceptions + CMSIS violates following MISRA-C2004 Rules: + + - Violates MISRA 2004 Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + - Violates MISRA 2004 Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + - Violates MISRA 2004 Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \defgroup CMSIS_core_definitions CMSIS Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core + - Cortex-M core Revision Number + @{ + */ + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | __CM4_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x04) /*!< Cortex core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + +/*!< __FPU_USED to be checked prior to making use of FPU specific registers and functions */ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1 + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0 + #endif + #else + #define __FPU_USED 0 + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1 + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0 + #endif + #else + #define __FPU_USED 0 + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1 + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0 + #endif + #else + #define __FPU_USED 0 + #endif + +#elif defined ( __TASKING__ ) + /* add preprocessor checks to define __FPU_USED */ + #define __FPU_USED 0 +#endif + +#include /*!< standard types definitions */ +#include /*!< Core Instruction Access */ +#include /*!< Core Function Access */ +#include /*!< Compiler specific SIMD Intrinsics */ + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000 + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0 + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0 + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + +/*@} end of group CMSIS_core_definitions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** \defgroup CMSIS_core_register CMSIS Core Register + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE CMSIS Core + Type definitions for the Cortex-M Core Registers + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC CMSIS NVIC + Type definitions for the Cortex-M NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB CMSIS SCB + Type definitions for the Cortex-M System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5]; + __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB CMSIS System Control and ID Register not in the SCB + Type definitions for the Cortex-M System Control and ID Register not in the SCB + @{ + */ + +/** \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1]; + __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick CMSIS SysTick + Type definitions for the Cortex-M System Timer Registers + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_ITM CMSIS ITM + Type definitions for the Cortex-M Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_TXENA_Pos 3 /*!< ITM TCR: TXENA Position */ +#define ITM_TCR_TXENA_Msk (1UL << ITM_TCR_TXENA_Pos) /*!< ITM TCR: TXENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +#if (__MPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_MPU CMSIS MPU + Type definitions for the Cortex-M Memory Protection Unit (MPU) + @{ + */ + +/** \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if (__FPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_FPU CMSIS FPU + Type definitions for the Cortex-M Floating Point Unit (FPU) + @{ + */ + +/** \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1]; + __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register */ +#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register */ +#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register */ +#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ +#endif + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug CMSIS Core Debug + Type definitions for the Cortex-M Core Debug Registers + @{ + */ + +/** \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + @{ + */ + +/* Memory mapping of Cortex-M4 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#if (__FPU_PRESENT == 1) + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions + @{ + */ + +/** \brief Set Priority Grouping + + This function sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + + \param [in] PriorityGroup Priority grouping field + */ +static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** \brief Get Priority Grouping + + This function gets the priority grouping from NVIC Interrupt Controller. + Priority grouping is SCB->AIRCR [10:8] PRIGROUP field. + + \return Priority grouping field + */ +static __INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + + +/** \brief Enable External Interrupt + + This function enables a device specific interrupt in the NVIC interrupt controller. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the external interrupt to enable + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ +/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */ + NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */ +} + + +/** \brief Disable External Interrupt + + This function disables a device specific interrupt in the NVIC interrupt controller. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the external interrupt to disable + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + + +/** \brief Get Pending Interrupt + + This function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Number of the interrupt for get pending + \return 0 Interrupt status is not pending + \return 1 Interrupt status is pending + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + + +/** \brief Set Pending Interrupt + + This function sets the pending bit for the specified interrupt. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the interrupt for set pending + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + + +/** \brief Clear Pending Interrupt + + This function clears the pending bit for the specified interrupt. + The interrupt number cannot be a negative value. + + \param [in] IRQn Number of the interrupt for clear pending + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Get Active Interrupt + + This function reads the active register in NVIC and returns the active bit. + \param [in] IRQn Number of the interrupt for get active + \return 0 Interrupt status is not active + \return 1 Interrupt status is active + */ +static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + + +/** \brief Set Interrupt Priority + + This function sets the priority for the specified interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + Note: The priority cannot be set for every core interrupt. + + \param [in] IRQn Number of the interrupt for set priority + \param [in] priority Priority to set + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + + +/** \brief Get Interrupt Priority + + This function reads the priority for the specified interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + The returned priority value is automatically aligned to the implemented + priority bits of the microcontroller. + + \param [in] IRQn Number of the interrupt for get priority + \return Interrupt Priority + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief Encode Priority + + This function encodes the priority for an interrupt with the given priority group, + preemptive priority value and sub priority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + + The returned priority value can be used for NVIC_SetPriority(...) function + + \param [in] PriorityGroup Used priority group + \param [in] PreemptPriority Preemptive priority value (starting from 0) + \param [in] SubPriority Sub priority value (starting from 0) + \return Encoded priority for the interrupt + */ +static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** \brief Decode Priority + + This function decodes an interrupt priority value with the given priority group to + preemptive priority value and sub priority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + + The priority value can be retrieved with NVIC_GetPriority(...) function + + \param [in] Priority Priority value + \param [in] PriorityGroup Used priority group + \param [out] pPreemptPriority Preemptive priority value (starting from 0) + \param [out] pSubPriority Sub priority value (starting from 0) + */ +static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + +/** \brief System Reset + + This function initiate a system reset request to reset the MCU. + */ +static __INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + This function initialises the system tick timer and its interrupt and start the system tick timer. + Counter is in free running mode to generate periodical interrupts. + + \param [in] ticks Number of ticks between two interrupts + \return 0 Function succeeded + \return 1 Function failed + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions CMSIS Core Debug Functions + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< external variable to receive characters */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */ + + +/** \brief ITM Send Character + + This function transmits a character via the ITM channel 0. + It just returns when no debugger is connected that has booked the output. + It is blocking when a debugger is connected, but the previous character send is not transmitted. + + \param [in] ch Character to transmit + \return Character to transmit + */ +static __INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */ + (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** \brief ITM Receive Character + + This function inputs a character via external variable ITM_RxBuffer. + It just returns when no debugger is connected that has booked the output. + It is blocking when a debugger is connected, but the previous character send is not transmitted. + + \return Received character + \return -1 No character received + */ +static __INLINE int32_t ITM_ReceiveChar (void) { + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** \brief ITM Check Character + + This function checks external variable ITM_RxBuffer whether a character is available or not. + It returns '1' if a character is available and '0' if no character is available. + + \return 0 No character available + \return 1 Character available + */ +static __INLINE int32_t ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/car_llvmkot/src/lib/cmsis/core_cm4_simd.h b/car_llvmkot/src/lib/cmsis/core_cm4_simd.h new file mode 100644 index 00000000000..479188696b1 --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/core_cm4_simd.h @@ -0,0 +1,701 @@ +/**************************************************************************//** + * @file core_cm4_simd.h + * @brief CMSIS Cortex-M4 SIMD Header File + * @version V2.10 + * @date 19. July 2011 + * + * @note + * Copyright (C) 2010-2011 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM4_SIMD_H +#define __CORE_CM4_SIMD_H + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +/*------ CM4 SOMD Intrinsics -----------------------------------------------------*/ +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + + +/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/ + + + +#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#include + +/*------ CM4 SIMDDSP Intrinsics -----------------------------------------------------*/ +/* intrinsic __SADD8 see intrinsics.h */ +/* intrinsic __QADD8 see intrinsics.h */ +/* intrinsic __SHADD8 see intrinsics.h */ +/* intrinsic __UADD8 see intrinsics.h */ +/* intrinsic __UQADD8 see intrinsics.h */ +/* intrinsic __UHADD8 see intrinsics.h */ +/* intrinsic __SSUB8 see intrinsics.h */ +/* intrinsic __QSUB8 see intrinsics.h */ +/* intrinsic __SHSUB8 see intrinsics.h */ +/* intrinsic __USUB8 see intrinsics.h */ +/* intrinsic __UQSUB8 see intrinsics.h */ +/* intrinsic __UHSUB8 see intrinsics.h */ +/* intrinsic __SADD16 see intrinsics.h */ +/* intrinsic __QADD16 see intrinsics.h */ +/* intrinsic __SHADD16 see intrinsics.h */ +/* intrinsic __UADD16 see intrinsics.h */ +/* intrinsic __UQADD16 see intrinsics.h */ +/* intrinsic __UHADD16 see intrinsics.h */ +/* intrinsic __SSUB16 see intrinsics.h */ +/* intrinsic __QSUB16 see intrinsics.h */ +/* intrinsic __SHSUB16 see intrinsics.h */ +/* intrinsic __USUB16 see intrinsics.h */ +/* intrinsic __UQSUB16 see intrinsics.h */ +/* intrinsic __UHSUB16 see intrinsics.h */ +/* intrinsic __SASX see intrinsics.h */ +/* intrinsic __QASX see intrinsics.h */ +/* intrinsic __SHASX see intrinsics.h */ +/* intrinsic __UASX see intrinsics.h */ +/* intrinsic __UQASX see intrinsics.h */ +/* intrinsic __UHASX see intrinsics.h */ +/* intrinsic __SSAX see intrinsics.h */ +/* intrinsic __QSAX see intrinsics.h */ +/* intrinsic __SHSAX see intrinsics.h */ +/* intrinsic __USAX see intrinsics.h */ +/* intrinsic __UQSAX see intrinsics.h */ +/* intrinsic __UHSAX see intrinsics.h */ +/* intrinsic __USAD8 see intrinsics.h */ +/* intrinsic __USADA8 see intrinsics.h */ +/* intrinsic __SSAT16 see intrinsics.h */ +/* intrinsic __USAT16 see intrinsics.h */ +/* intrinsic __UXTB16 see intrinsics.h */ +/* intrinsic __SXTB16 see intrinsics.h */ +/* intrinsic __UXTAB16 see intrinsics.h */ +/* intrinsic __SXTAB16 see intrinsics.h */ +/* intrinsic __SMUAD see intrinsics.h */ +/* intrinsic __SMUADX see intrinsics.h */ +/* intrinsic __SMLAD see intrinsics.h */ +/* intrinsic __SMLADX see intrinsics.h */ +/* intrinsic __SMLALD see intrinsics.h */ +/* intrinsic __SMLALDX see intrinsics.h */ +/* intrinsic __SMUSD see intrinsics.h */ +/* intrinsic __SMUSDX see intrinsics.h */ +/* intrinsic __SMLSD see intrinsics.h */ +/* intrinsic __SMLSDX see intrinsics.h */ +/* intrinsic __SMLSLD see intrinsics.h */ +/* intrinsic __SMLSLDX see intrinsics.h */ +/* intrinsic __SEL see intrinsics.h */ +/* intrinsic __QADD see intrinsics.h */ +/* intrinsic __QSUB see intrinsics.h */ +/* intrinsic __PKHBT see intrinsics.h */ +/* intrinsic __PKHTB see intrinsics.h */ + +/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/ + + + +#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SMLALD(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \ + (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \ + }) + +#define __SMLALDX(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \ + (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \ + }) + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SMLSLD(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \ + (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \ + }) + +#define __SMLSLDX(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \ + (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \ + }) + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __QADD(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) static __INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/ + + + +#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +/* TASKING carm specific functions */ + + +/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/ +/* not yet supported */ +/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/ + + +#endif + +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CORE_CM4_SIMD_H */ + +#ifdef __cplusplus +} +#endif diff --git a/car_llvmkot/src/lib/cmsis/core_cmFunc.h b/car_llvmkot/src/lib/cmsis/core_cmFunc.h new file mode 100644 index 00000000000..c999b1c83b0 --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/core_cmFunc.h @@ -0,0 +1,609 @@ +/**************************************************************************//** + * @file core_cmFunc.h + * @brief CMSIS Cortex-M Core Function Access Header File + * @version V2.10 + * @date 26. July 2011 + * + * @note + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifndef __CORE_CMFUNC_H +#define __CORE_CMFUNC_H + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#if (__ARMCC_VERSION < 400677) + #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#endif + +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + +/** \brief Get Control Register + + This function returns the content of the Control Register. + + \return Control Register value + */ +static __INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** \brief Set Control Register + + This function writes the given value to the Control Register. + + \param [in] control Control Register value to set + */ +static __INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** \brief Get ISPR Register + + This function returns the content of the ISPR Register. + + \return ISPR Register value + */ +static __INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** \brief Get APSR Register + + This function returns the content of the APSR Register. + + \return APSR Register value + */ +static __INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** \brief Get xPSR Register + + This function returns the content of the xPSR Register. + + \return xPSR Register value + */ +static __INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** \brief Get Process Stack Pointer + + This function returns the current value of the Process Stack Pointer (PSP). + + \return PSP Register value + */ +static __INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** \brief Set Process Stack Pointer + + This function assigns the given value to the Process Stack Pointer (PSP). + + \param [in] topOfProcStack Process Stack Pointer value to set + */ +static __INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** \brief Get Main Stack Pointer + + This function returns the current value of the Main Stack Pointer (MSP). + + \return MSP Register value + */ +static __INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** \brief Set Main Stack Pointer + + This function assigns the given value to the Main Stack Pointer (MSP). + + \param [in] topOfMainStack Main Stack Pointer value to set + */ +static __INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** \brief Get Priority Mask + + This function returns the current state of the priority mask bit from the Priority Mask Register. + + \return Priority Mask value + */ +static __INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** \brief Set Priority Mask + + This function assigns the given value to the Priority Mask Register. + + \param [in] priMask Priority Mask + */ +static __INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if (__CORTEX_M >= 0x03) + +/** \brief Enable FIQ + + This function enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** \brief Disable FIQ + + This function disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** \brief Get Base Priority + + This function returns the current value of the Base Priority register. + + \return Base Priority register value + */ +static __INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** \brief Set Base Priority + + This function assigns the given value to the Base Priority register. + + \param [in] basePri Base Priority value to set + */ +static __INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); +} + + +/** \brief Get Fault Mask + + This function returns the current value of the Fault Mask register. + + \return Fault Mask register value + */ +static __INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** \brief Set Fault Mask + + This function assigns the given value to the Fault Mask register. + + \param [in] faultMask Fault Mask value to set + */ +static __INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1); +} + +#endif /* (__CORTEX_M >= 0x03) */ + + +#if (__CORTEX_M == 0x04) + +/** \brief Get FPSCR + + This function returns the current value of the Floating Point Status/Control register. + + \return Floating Point Status/Control register value + */ +static __INLINE uint32_t __get_FPSCR(void) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0); +#endif +} + + +/** \brief Set FPSCR + + This function assigns the given value to the Floating Point Status/Control register. + + \param [in] fpscr Floating Point Status/Control value to set + */ +static __INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#endif +} + +#endif /* (__CORTEX_M == 0x04) */ + + +#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#include + +#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** \brief Enable IRQ Interrupts + + This function enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) static __INLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i"); +} + + +/** \brief Disable IRQ Interrupts + + This function disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) static __INLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i"); +} + + +/** \brief Get Control Register + + This function returns the content of the Control Register. + + \return Control Register value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +/** \brief Set Control Register + + This function writes the given value to the Control Register. + + \param [in] control Control Register value to set + */ +__attribute__( ( always_inline ) ) static __INLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) ); +} + + +/** \brief Get ISPR Register + + This function returns the content of the ISPR Register. + + \return ISPR Register value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** \brief Get APSR Register + + This function returns the content of the APSR Register. + + \return APSR Register value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** \brief Get xPSR Register + + This function returns the content of the xPSR Register. + + \return xPSR Register value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** \brief Get Process Stack Pointer + + This function returns the current value of the Process Stack Pointer (PSP). + + \return PSP Register value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_PSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, psp\n" : "=r" (result) ); + return(result); +} + + +/** \brief Set Process Stack Pointer + + This function assigns the given value to the Process Stack Pointer (PSP). + + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__attribute__( ( always_inline ) ) static __INLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) ); +} + + +/** \brief Get Main Stack Pointer + + This function returns the current value of the Main Stack Pointer (MSP). + + \return MSP Register value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_MSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, msp\n" : "=r" (result) ); + return(result); +} + + +/** \brief Set Main Stack Pointer + + This function assigns the given value to the Main Stack Pointer (MSP). + + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__attribute__( ( always_inline ) ) static __INLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) ); +} + + +/** \brief Get Priority Mask + + This function returns the current state of the priority mask bit from the Priority Mask Register. + + \return Priority Mask value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +/** \brief Set Priority Mask + + This function assigns the given value to the Priority Mask Register. + + \param [in] priMask Priority Mask + */ +__attribute__( ( always_inline ) ) static __INLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) ); +} + + +#if (__CORTEX_M >= 0x03) + +/** \brief Enable FIQ + + This function enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) static __INLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f"); +} + + +/** \brief Disable FIQ + + This function disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) static __INLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f"); +} + + +/** \brief Get Base Priority + + This function returns the current value of the Base Priority register. + + \return Base Priority register value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); + return(result); +} + + +/** \brief Set Base Priority + + This function assigns the given value to the Base Priority register. + + \param [in] basePri Base Priority value to set + */ +__attribute__( ( always_inline ) ) static __INLINE void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) ); +} + + +/** \brief Get Fault Mask + + This function returns the current value of the Fault Mask register. + + \return Fault Mask register value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +/** \brief Set Fault Mask + + This function assigns the given value to the Fault Mask register. + + \param [in] faultMask Fault Mask value to set + */ +__attribute__( ( always_inline ) ) static __INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) ); +} + +#endif /* (__CORTEX_M >= 0x03) */ + + +#if (__CORTEX_M == 0x04) + +/** \brief Get FPSCR + + This function returns the current value of the Floating Point Status/Control register. + + \return Floating Point Status/Control register value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_FPSCR(void) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#else + return(0); +#endif +} + + +/** \brief Set FPSCR + + This function assigns the given value to the Floating Point Status/Control register. + + \param [in] fpscr Floating Point Status/Control value to set + */ +__attribute__( ( always_inline ) ) static __INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) ); +#endif +} + +#endif /* (__CORTEX_M == 0x04) */ + + +#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +#endif /* __CORE_CMFUNC_H */ diff --git a/car_llvmkot/src/lib/cmsis/core_cmInstr.h b/car_llvmkot/src/lib/cmsis/core_cmInstr.h new file mode 100644 index 00000000000..ceb4f875686 --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/core_cmInstr.h @@ -0,0 +1,585 @@ +/**************************************************************************//** + * @file core_cmInstr.h + * @brief CMSIS Cortex-M Core Instruction Access Header File + * @version V2.10 + * @date 19. July 2011 + * + * @note + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifndef __CORE_CMINSTR_H +#define __CORE_CMINSTR_H + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#if (__ARMCC_VERSION < 400677) + #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#endif + + +/** \brief No Operation + + No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** \brief Wait For Interrupt + + Wait For Interrupt is a hint instruction that suspends execution + until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** \brief Wait For Event + + Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** \brief Send Event + + Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** \brief Instruction Synchronization Barrier + + Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or + memory, after the instruction has been completed. + */ +#define __ISB() __isb(0xF) + + +/** \brief Data Synchronization Barrier + + This function acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __dsb(0xF) + + +/** \brief Data Memory Barrier + + This function ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __dmb(0xF) + + +/** \brief Reverse byte order (32 bit) + + This function reverses the byte order in integer value. + + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** \brief Reverse byte order (16 bit) + + This function reverses the byte order in two unsigned short values. + + \param [in] value Value to reverse + \return Reversed value + */ +static __INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} + + +/** \brief Reverse byte order in signed short value + + This function reverses the byte order in a signed short value with sign extension to integer. + + \param [in] value Value to reverse + \return Reversed value + */ +static __INLINE __ASM int32_t __REVSH(int32_t value) +{ + revsh r0, r0 + bx lr +} + + +#if (__CORTEX_M >= 0x03) + +/** \brief Reverse bit order of value + + This function reverses the bit order of the given value. + + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __rbit + + +/** \brief LDR Exclusive (8 bit) + + This function performs a exclusive LDR command for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) + + +/** \brief LDR Exclusive (16 bit) + + This function performs a exclusive LDR command for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) + + +/** \brief LDR Exclusive (32 bit) + + This function performs a exclusive LDR command for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) + + +/** \brief STR Exclusive (8 bit) + + This function performs a exclusive STR command for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB(value, ptr) __strex(value, ptr) + + +/** \brief STR Exclusive (16 bit) + + This function performs a exclusive STR command for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH(value, ptr) __strex(value, ptr) + + +/** \brief STR Exclusive (32 bit) + + This function performs a exclusive STR command for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW(value, ptr) __strex(value, ptr) + + +/** \brief Remove the exclusive lock + + This function removes the exclusive lock which is created by LDREX. + + */ +#define __CLREX __clrex + + +/** \brief Signed Saturate + + This function saturates a signed value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** \brief Unsigned Saturate + + This function saturates an unsigned value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** \brief Count leading zeros + + This function counts the number of leading zeros of a data value. + + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + +#endif /* (__CORTEX_M >= 0x03) */ + + + +#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#include + + +#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** \brief No Operation + + No Operation does nothing. This instruction can be used for code alignment purposes. + */ +__attribute__( ( always_inline ) ) static __INLINE void __NOP(void) +{ + __ASM volatile ("nop"); +} + + +/** \brief Wait For Interrupt + + Wait For Interrupt is a hint instruction that suspends execution + until one of a number of events occurs. + */ +__attribute__( ( always_inline ) ) static __INLINE void __WFI(void) +{ + __ASM volatile ("wfi"); +} + + +/** \brief Wait For Event + + Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +__attribute__( ( always_inline ) ) static __INLINE void __WFE(void) +{ + __ASM volatile ("wfe"); +} + + +/** \brief Send Event + + Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +__attribute__( ( always_inline ) ) static __INLINE void __SEV(void) +{ + __ASM volatile ("sev"); +} + + +/** \brief Instruction Synchronization Barrier + + Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or + memory, after the instruction has been completed. + */ +__attribute__( ( always_inline ) ) static __INLINE void __ISB(void) +{ + __ASM volatile ("isb"); +} + + +/** \brief Data Synchronization Barrier + + This function acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__attribute__( ( always_inline ) ) static __INLINE void __DSB(void) +{ + __ASM volatile ("dsb"); +} + + +/** \brief Data Memory Barrier + + This function ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__attribute__( ( always_inline ) ) static __INLINE void __DMB(void) +{ + __ASM volatile ("dmb"); +} + + +/** \brief Reverse byte order (32 bit) + + This function reverses the byte order in integer value. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __REV(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +/** \brief Reverse byte order (16 bit) + + This function reverses the byte order in two unsigned short values. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +/** \brief Reverse byte order in signed short value + + This function reverses the byte order in a signed short value with sign extension to integer. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) static __INLINE int32_t __REVSH(int32_t value) +{ + uint32_t result; + + __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +#if (__CORTEX_M >= 0x03) + +/** \brief Reverse bit order of value + + This function reverses the bit order of the given value. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +/** \brief LDR Exclusive (8 bit) + + This function performs a exclusive LDR command for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__attribute__( ( always_inline ) ) static __INLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint8_t result; + + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + + +/** \brief LDR Exclusive (16 bit) + + This function performs a exclusive LDR command for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__attribute__( ( always_inline ) ) static __INLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint16_t result; + + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + + +/** \brief LDR Exclusive (32 bit) + + This function performs a exclusive LDR command for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + + +/** \brief STR Exclusive (8 bit) + + This function performs a exclusive STR command for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +/** \brief STR Exclusive (16 bit) + + This function performs a exclusive STR command for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +/** \brief STR Exclusive (32 bit) + + This function performs a exclusive STR command for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) static __INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +/** \brief Remove the exclusive lock + + This function removes the exclusive lock which is created by LDREX. + + */ +__attribute__( ( always_inline ) ) static __INLINE void __CLREX(void) +{ + __ASM volatile ("clrex"); +} + + +/** \brief Signed Saturate + + This function saturates a signed value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** \brief Unsigned Saturate + + This function saturates an unsigned value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** \brief Count leading zeros + + This function counts the number of leading zeros of a data value. + + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__attribute__( ( always_inline ) ) static __INLINE uint8_t __CLZ(uint32_t value) +{ + uint8_t result; + + __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +#endif /* (__CORTEX_M >= 0x03) */ + + + + +#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + +#endif + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + +#endif /* __CORE_CMINSTR_H */ diff --git a/car_llvmkot/src/lib/cmsis/startup_stm32f4xx.s b/car_llvmkot/src/lib/cmsis/startup_stm32f4xx.s new file mode 100644 index 00000000000..c8d696beb08 --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/startup_stm32f4xx.s @@ -0,0 +1,509 @@ +/** + ****************************************************************************** + * @file startup_stm32f4xx.s + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief STM32F4xx Devices vector table for RIDE7 toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the clock system and the external SRAM mounted on + * STM324xG-EVAL board to be used as data memory (optional, + * to be enabled by user) + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m3 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FSMC_IRQHandler /* FSMC */ + .word SDIO_IRQHandler /* SDIO */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word ETH_IRQHandler /* Ethernet */ + .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SCE_IRQHandler /* CAN2 SCE */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_IRQHandler /* DCMI */ + .word CRYP_IRQHandler /* CRYP crypto */ + .word HASH_RNG_IRQHandler /* Hash and Rng */ + .word FPU_IRQHandler /* FPU */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FSMC_IRQHandler + .thumb_set FSMC_IRQHandler,Default_Handler + + .weak SDIO_IRQHandler + .thumb_set SDIO_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak ETH_IRQHandler + .thumb_set ETH_IRQHandler,Default_Handler + + .weak ETH_WKUP_IRQHandler + .thumb_set ETH_WKUP_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak CRYP_IRQHandler + .thumb_set CRYP_IRQHandler,Default_Handler + + .weak HASH_RNG_IRQHandler + .thumb_set HASH_RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/cmsis/stm32f4xx.h b/car_llvmkot/src/lib/cmsis/stm32f4xx.h new file mode 100644 index 00000000000..e7b49be29fe --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/stm32f4xx.h @@ -0,0 +1,7004 @@ +/** + ****************************************************************************** + * @file stm32f4xx.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F4xx devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by + * "#define USE_STDPERIPH_DRIVER" + * - To change few application-specific parameters such as the HSE + * crystal frequency + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx + * @{ + */ + +#ifndef __STM32F4xx_H +#define __STM32F4xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + +#if !defined (STM32F4XX) + #define STM32F4XX +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +#if !defined (STM32F4XX) + #error "Please select first the target STM32F4XX device used in your application (in stm32f4xx.h file)" +#endif + +#if !defined (USE_STDPERIPH_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER*/ +#endif /* USE_STDPERIPH_DRIVER */ + +/** + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. + */ + +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ +#endif /* HSE_STARTUP_TIMEOUT */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief STM32F4XX Standard Peripherals Library version number V1.0.0 + */ +#define __STM32F4XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32F4XX_STDPERIPH_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */ +#define __STM32F4XX_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32F4XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F4XX_STDPERIPH_VERSION ((__STM32F4XX_STDPERIPH_VERSION_MAIN << 24)\ + |(__STM32F4XX_STDPERIPH_VERSION_SUB1 << 16)\ + |(__STM32F4XX_STDPERIPH_VERSION_SUB2 << 8)\ + |(__STM32F4XX_STDPERIPH_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 0x0001 /*!< Core revision r0p1 */ +#define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */ +#define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +#if !defined (__FPU_PRESENT) + #define __FPU_PRESENT 1 /*!< FPU present */ +#endif /* __FPU_PRESENT */ + + + +/** + * @brief STM32F4XX Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum IRQn +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ + DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ + DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ + DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ + DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ + DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ + DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ + ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ + FPU_IRQn = 81 /*!< FPU global interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32f4xx.h" +#include + +/** @addtogroup Exported_types + * @{ + */ +/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef const int32_t sc32; /*!< Read Only */ +typedef const int16_t sc16; /*!< Read Only */ +typedef const int8_t sc8; /*!< Read Only */ + +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef __I int32_t vsc32; /*!< Read Only */ +typedef __I int16_t vsc16; /*!< Read Only */ +typedef __I int8_t vsc8; /*!< Read Only */ + +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef const uint32_t uc32; /*!< Read Only */ +typedef const uint16_t uc16; /*!< Read Only */ +typedef const uint8_t uc8; /*!< Read Only */ + +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef __I uint32_t vuc32; /*!< Read Only */ +typedef __I uint16_t vuc16; /*!< Read Only */ +typedef __I uint8_t vuc8; /*!< Read Only */ + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/** + * @} + */ + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ + __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ + __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */ + __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */ + __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */ + __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */ + __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */ + __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CDR; /*!< ADC common regular data register for dual + AND triple modes, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DCMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ + __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ + __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ + __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ + __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ + __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ + __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ + __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ + __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ + __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ + __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ +} DCMI_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA stream x configuration register */ + __IO uint32_t NDTR; /*!< DMA stream x number of data register */ + __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ + __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ + __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ + __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ +} DMA_Stream_TypeDef; + +typedef struct +{ + __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ + __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ + __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ + __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ +} DMA_TypeDef; + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + __IO uint32_t RESERVED8; + __IO uint32_t PTPTSSR; + uint32_t RESERVED9[565]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + __IO uint32_t DMARSWTR; + uint32_t RESERVED10[8]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ + __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ + __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ + __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ + __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ + __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ + __IO uint32_t OPTCR; /*!< FLASH option control register, Address offset: 0x14 */ +} FLASH_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ +} FSMC_Bank2_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FSMC_Bank3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */ + __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */ + __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */ + __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */ + __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */ +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low register, Address offset: 0x18 */ + __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ +} GPIO_TypeDef; + +/** + * @brief System configuration controller + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */ + __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ +} SYSCFG_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint16_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + uint16_t RESERVED0; /*!< Reserved, 0x02 */ + __IO uint16_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint16_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */ + uint16_t RESERVED2; /*!< Reserved, 0x0A */ + __IO uint16_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */ + uint16_t RESERVED3; /*!< Reserved, 0x0E */ + __IO uint16_t DR; /*!< I2C Data register, Address offset: 0x10 */ + uint16_t RESERVED4; /*!< Reserved, 0x12 */ + __IO uint16_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */ + uint16_t RESERVED5; /*!< Reserved, 0x16 */ + __IO uint16_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */ + uint16_t RESERVED6; /*!< Reserved, 0x1A */ + __IO uint16_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */ + uint16_t RESERVED7; /*!< Reserved, 0x1E */ + __IO uint16_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ + uint16_t RESERVED8; /*!< Reserved, 0x22 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */ + __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ + __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, 0x1C */ + __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved, 0x3C */ + __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */ + uint32_t RESERVED4; /*!< Reserved, 0x5C */ + __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */ + uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */ + __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ + __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ + __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */ + uint32_t RESERVED7; /*!< Reserved, 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ +} RTC_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ + __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ + __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */ +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint16_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ + uint16_t RESERVED0; /*!< Reserved, 0x02 */ + __IO uint16_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint16_t SR; /*!< SPI status register, Address offset: 0x08 */ + uint16_t RESERVED2; /*!< Reserved, 0x0A */ + __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */ + uint16_t RESERVED3; /*!< Reserved, 0x0E */ + __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + uint16_t RESERVED4; /*!< Reserved, 0x12 */ + __IO uint16_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ + uint16_t RESERVED5; /*!< Reserved, 0x16 */ + __IO uint16_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ + uint16_t RESERVED6; /*!< Reserved, 0x1A */ + __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + uint16_t RESERVED7; /*!< Reserved, 0x1E */ + __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ + uint16_t RESERVED8; /*!< Reserved, 0x22 */ +} SPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint16_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + uint16_t RESERVED0; /*!< Reserved, 0x02 */ + __IO uint16_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint16_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + uint16_t RESERVED2; /*!< Reserved, 0x0A */ + __IO uint16_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + uint16_t RESERVED3; /*!< Reserved, 0x0E */ + __IO uint16_t SR; /*!< TIM status register, Address offset: 0x10 */ + uint16_t RESERVED4; /*!< Reserved, 0x12 */ + __IO uint16_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + uint16_t RESERVED5; /*!< Reserved, 0x16 */ + __IO uint16_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + uint16_t RESERVED6; /*!< Reserved, 0x1A */ + __IO uint16_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + uint16_t RESERVED7; /*!< Reserved, 0x1E */ + __IO uint16_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + uint16_t RESERVED8; /*!< Reserved, 0x22 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint16_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + uint16_t RESERVED9; /*!< Reserved, 0x2A */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint16_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + uint16_t RESERVED10; /*!< Reserved, 0x32 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint16_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + uint16_t RESERVED11; /*!< Reserved, 0x46 */ + __IO uint16_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + uint16_t RESERVED12; /*!< Reserved, 0x4A */ + __IO uint16_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + uint16_t RESERVED13; /*!< Reserved, 0x4E */ + __IO uint16_t OR; /*!< TIM option register, Address offset: 0x50 */ + uint16_t RESERVED14; /*!< Reserved, 0x52 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint16_t SR; /*!< USART Status register, Address offset: 0x00 */ + uint16_t RESERVED0; /*!< Reserved, 0x02 */ + __IO uint16_t DR; /*!< USART Data register, Address offset: 0x04 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint16_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + uint16_t RESERVED2; /*!< Reserved, 0x0A */ + __IO uint16_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + uint16_t RESERVED3; /*!< Reserved, 0x0E */ + __IO uint16_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + uint16_t RESERVED4; /*!< Reserved, 0x12 */ + __IO uint16_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + uint16_t RESERVED5; /*!< Reserved, 0x16 */ + __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ + uint16_t RESERVED6; /*!< Reserved, 0x1A */ +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @brief Crypto Processor + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< CRYP data input register, Address offset: 0x08 */ + __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */ + __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */ + __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */ + __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */ + __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */ + __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */ + __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */ + __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */ + __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */ + __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */ + __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */ + __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */ + __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */ + __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */ + __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */ + __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */ + __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */ +} CRYP_TypeDef; + +/** + * @brief HASH + */ + +typedef struct +{ + __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ + __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ + __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ + __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ + __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ + __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ + uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ + __IO uint32_t CSR[51]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1C0 */ +} HASH_TypeDef; + +/** + * @brief HASH + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 1 MB) base address in the alias region */ +#define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region */ +#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region */ +#define SRAM2_BASE ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ +#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region */ +#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ + +#define CCMDATARAM_BB_BASE ((uint32_t)0x12000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the bit-band region */ +#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region */ +#define SRAM2_BB_BASE ((uint32_t)0x2201C000) /*!< SRAM2(16 KB) base address in the bit-band region */ +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ +#define BKPSRAM_BB_BASE ((uint32_t)0x42024000) /*!< Backup SRAM(4 KB) base address in the bit-band region */ + +/* Legacy defines */ +#define SRAM_BASE SRAM1_BASE +#define SRAM_BB_BASE SRAM1_BB_BASE + + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x0400) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000) +#define USART6_BASE (APB2PERIPH_BASE + 0x1400) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2100) +#define ADC3_BASE (APB2PERIPH_BASE + 0x2200) +#define ADC_BASE (APB2PERIPH_BASE + 0x2300) +#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800) +#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4000) +#define TIM10_BASE (APB2PERIPH_BASE + 0x4400) +#define TIM11_BASE (APB2PERIPH_BASE + 0x4800) + +/*!< AHB1 peripherals */ +#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000) +#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400) +#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800) +#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00) +#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000) +#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400) +#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800) +#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00) +#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000) +#define CRC_BASE (AHB1PERIPH_BASE + 0x3000) +#define RCC_BASE (AHB1PERIPH_BASE + 0x3800) +#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00) +#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000) +#define DMA1_Stream0_BASE (DMA1_BASE + 0x010) +#define DMA1_Stream1_BASE (DMA1_BASE + 0x028) +#define DMA1_Stream2_BASE (DMA1_BASE + 0x040) +#define DMA1_Stream3_BASE (DMA1_BASE + 0x058) +#define DMA1_Stream4_BASE (DMA1_BASE + 0x070) +#define DMA1_Stream5_BASE (DMA1_BASE + 0x088) +#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0) +#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400) +#define DMA2_Stream0_BASE (DMA2_BASE + 0x010) +#define DMA2_Stream1_BASE (DMA2_BASE + 0x028) +#define DMA2_Stream2_BASE (DMA2_BASE + 0x040) +#define DMA2_Stream3_BASE (DMA2_BASE + 0x058) +#define DMA2_Stream4_BASE (DMA2_BASE + 0x070) +#define DMA2_Stream5_BASE (DMA2_BASE + 0x088) +#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0) +#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) + +/*!< AHB2 peripherals */ +#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000) +#define CRYP_BASE (AHB2PERIPH_BASE + 0x60000) +#define HASH_BASE (AHB2PERIPH_BASE + 0x60400) +#define RNG_BASE (AHB2PERIPH_BASE + 0x60800) + +/*!< FSMC Bankx registers base address */ +#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) +#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) +#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) +#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) +#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE ((uint32_t )0xE0042000) + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART6 ((USART_TypeDef *) USART6_BASE) +#define ADC ((ADC_Common_TypeDef *) ADC_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define SDIO ((SDIO_TypeDef *) SDIO_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) +#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) +#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) +#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) +#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) +#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) +#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) +#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) +#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) +#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) +#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) +#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) +#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) +#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) +#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define DCMI ((DCMI_TypeDef *) DCMI_BASE) +#define CRYP ((CRYP_TypeDef *) CRYP_BASE) +#define HASH ((HASH_TypeDef *) HASH_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) +#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) +#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD ((uint8_t)0x01) /*!
© COPYRIGHT 2011 STMicroelectronics
+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx_system + * @{ + */ + +/** @addtogroup STM32F4xx_System_Private_Includes + * @{ + */ + +#include "stm32f4xx.h" + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM324xG_EVAL board as data memory */ +/* #define DATA_IN_ExtSRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/************************* PLL Parameters *************************************/ +/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */ +#define PLL_M 25 +#define PLL_N 336 + +/* SYSCLK = PLL_VCO / PLL_P */ +#define PLL_P 2 + +/* USB OTG FS, SDIO and RNG Clock = PLL_VCO / PLLQ */ +#define PLL_Q 7 + +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Variables + * @{ + */ + + uint32_t SystemCoreClock = 168000000; + + __I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemFrequency variable. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +#ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM */ + + /* Configure the System clock source, PLL Multiplier and Divider factors, + AHB/APBx prescalers and Flash settings ----------------------------------*/ + SetSysClock(); + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + SystemCoreClock = pllvco/pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock source, PLL Multiplier and Divider factors, + * AHB/APBx prescalers and Flash settings + * @Note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +static void SetSysClock(void) +{ +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Select regulator voltage output Scale 1 mode, System frequency up to 168 MHz */ + RCC->APB1ENR |= RCC_APB1ENR_PWREN; + PWR->CR |= PWR_CR_VOS; + + /* HCLK = SYSCLK / 1*/ + RCC->CFGR |= RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK / 2*/ + RCC->CFGR |= RCC_CFGR_PPRE2_DIV2; + + /* PCLK1 = HCLK / 4*/ + RCC->CFGR |= RCC_CFGR_PPRE1_DIV4; + + /* Configure the main PLL */ + RCC->PLLCFGR = PLL_M | (PLL_N << 6) | (((PLL_P >> 1) -1) << 16) | + (RCC_PLLCFGR_PLLSRC_HSE) | (PLL_Q << 24); + + /* Enable the main PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till the main PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Configure Flash prefetch, Instruction cache, Data cache and wait state */ + FLASH->ACR = FLASH_ACR_ICEN |FLASH_ACR_DCEN |FLASH_ACR_LATENCY_5WS; + + /* Select the main PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= RCC_CFGR_SW_PLL; + + /* Wait till the main PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS ) != RCC_CFGR_SWS_PLL); + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } + +} + +/** + * @brief Setup the external memory controller. Called in startup_stm32f4xx.s + * before jump to __main + * @param None + * @retval None + */ +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external SRAM mounted on STM324xG_EVAL board + * This SRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*-- GPIOs Configuration -----------------------------------------------------*/ +/* + +-------------------+--------------------+------------------+------------------+ + + SRAM pins assignment + + +-------------------+--------------------+------------------+------------------+ + | PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 | + | PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 | + | PD4 <-> FSMC_NOE | PE3 <-> FSMC_A19 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 | + | PD5 <-> FSMC_NWE | PE4 <-> FSMC_A20 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 | + | PD8 <-> FSMC_D13 | PE7 <-> FSMC_D4 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 | + | PD9 <-> FSMC_D14 | PE8 <-> FSMC_D5 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 | + | PD10 <-> FSMC_D15 | PE9 <-> FSMC_D6 | PF12 <-> FSMC_A6 | PG9 <-> FSMC_NE2 | + | PD11 <-> FSMC_A16 | PE10 <-> FSMC_D7 | PF13 <-> FSMC_A7 |------------------+ + | PD12 <-> FSMC_A17 | PE11 <-> FSMC_D8 | PF14 <-> FSMC_A8 | + | PD13 <-> FSMC_A18 | PE12 <-> FSMC_D9 | PF15 <-> FSMC_A9 | + | PD14 <-> FSMC_D0 | PE13 <-> FSMC_D10 |------------------+ + | PD15 <-> FSMC_D1 | PE14 <-> FSMC_D11 | + | | PE15 <-> FSMC_D12 | + +-------------------+--------------------+ +*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB1ENR = 0x00000078; + + /* Connect PDx pins to FSMC Alternate function */ + GPIOD->AFR[0] = 0x00cc00cc; + GPIOD->AFR[1] = 0xcc0ccccc; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xaaaa0a0a; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xffff0f0f; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FSMC Alternate function */ + GPIOE->AFR[0] = 0xc00cc0cc; + GPIOE->AFR[1] = 0xcccccccc; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xaaaa828a; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xffffc3cf; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FSMC Alternate function */ + GPIOF->AFR[0] = 0x00cccccc; + GPIOF->AFR[1] = 0xcccc0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xaa000aaa; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xff000fff; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FSMC Alternate function */ + GPIOG->AFR[0] = 0x00cccccc; + GPIOG->AFR[1] = 0x000000c0; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00080aaa; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x000c0fff; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FSMC Configuration ------------------------------------------------------*/ + /* Enable the FSMC interface clock */ + RCC->AHB3ENR = 0x00000001; + + /* Configure and enable Bank1_SRAM2 */ + FSMC_Bank1->BTCR[2] = 0x00001015; + FSMC_Bank1->BTCR[3] = 0x00010603; + FSMC_Bank1E->BWTR[2] = 0x0fffffff; +/* + Bank1_SRAM2 is configured as follow: + + p.FSMC_AddressSetupTime = 3; + p.FSMC_AddressHoldTime = 0; + p.FSMC_DataSetupTime = 6; + p.FSMC_BusTurnAroundDuration = 1; + p.FSMC_CLKDivision = 0; + p.FSMC_DataLatency = 0; + p.FSMC_AccessMode = FSMC_AccessMode_A; + + FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2; + FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; + FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_PSRAM; + FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; + FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; + FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p; + FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; +*/ + +} +#endif /* DATA_IN_ExtSRAM */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/cmsis/system_stm32f4xx.h b/car_llvmkot/src/lib/cmsis/system_stm32f4xx.h new file mode 100644 index 00000000000..7b298509efc --- /dev/null +++ b/car_llvmkot/src/lib/cmsis/system_stm32f4xx.h @@ -0,0 +1,99 @@ +/** + ****************************************************************************** + * @file system_stm32f4xx.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F4XX_H +#define __SYSTEM_STM32F4XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F4xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F4xx_System_Exported_types + * @{ + */ + +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F4XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/Makefile b/car_llvmkot/src/lib/stdperiph/Makefile new file mode 100644 index 00000000000..f9452148b9c --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/Makefile @@ -0,0 +1,9 @@ +LIB_STDPERIPH_OBJ_PREFIX=libstdperiph_ + +$(LIB_STDPERIPH_OBJ): \ + $(call dircs_to_prefxd_objs,$(LIB_STDPERIPH_DIR),$(LIB_STDPRPH_OBJ_PREFIX)) + $(LD_ALL_DEPS) + +$(BIN_DIR)/$(LIB_STDPRPH_OBJ_PREFIX)%.o: $(LIB_STDPERIPH_DIR)/%.c \ + $(call dirhs,$(LIB_STDPERIPH_DIR)) + $(CC_ALL_DEPS) diff --git a/car_llvmkot/src/lib/stdperiph/misc.c b/car_llvmkot/src/lib/stdperiph/misc.c new file mode 100644 index 00000000000..b22514040b2 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/misc.c @@ -0,0 +1,244 @@ +/** + ****************************************************************************** + * @file misc.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides all the miscellaneous firmware functions (add-on + * to CMSIS functions). + * + * @verbatim + * + * =================================================================== + * How to configure Interrupts using driver + * =================================================================== + * + * This section provide functions allowing to configure the NVIC interrupts (IRQ). + * The Cortex-M4 exceptions are managed by CMSIS functions. + * + * 1. Configure the NVIC Priority Grouping using NVIC_PriorityGroupConfig() + * function according to the following table. + + * The table below gives the allowed values of the pre-emption priority and subpriority according + * to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function + * ========================================================================================================================== + * NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + * ========================================================================================================================== + * NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority + * | | | 4 bits for subpriority + * -------------------------------------------------------------------------------------------------------------------------- + * NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority + * | | | 3 bits for subpriority + * -------------------------------------------------------------------------------------------------------------------------- + * NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + * | | | 2 bits for subpriority + * -------------------------------------------------------------------------------------------------------------------------- + * NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + * | | | 1 bits for subpriority + * -------------------------------------------------------------------------------------------------------------------------- + * NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority + * | | | 0 bits for subpriority + * ========================================================================================================================== + * + * 2. Enable and Configure the priority of the selected IRQ Channels using NVIC_Init() + * + * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * + * @note IRQ priority order (sorted by highest to lowest priority): + * - Lowest pre-emption priority + * - Lowest subpriority + * - Lowest hardware priority (IRQ number) + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "misc.h" +#include "stm32f4xx_conf.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup MISC + * @brief MISC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup MISC_Private_Functions + * @{ + */ + +/** + * @brief Configures the priority grouping: pre-emption priority and subpriority. + * @param NVIC_PriorityGroup: specifies the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority + * 4 bits for subpriority + * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority + * 3 bits for subpriority + * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority + * 2 bits for subpriority + * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority + * 1 bits for subpriority + * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority + * 0 bits for subpriority + * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ + SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; +} + +/** + * @brief Initializes the NVIC peripheral according to the specified + * parameters in the NVIC_InitStruct. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains + * the configuration information for the specified NVIC peripheral. + * @retval None + */ +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) +{ + uint8_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); + assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); + + if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) + { + /* Compute the Corresponding IRQ Priority --------------------------------*/ + tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; + tmppre = (0x4 - tmppriority); + tmpsub = tmpsub >> tmppriority; + + tmppriority = NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; + tmppriority |= (uint8_t)(NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub); + + tmppriority = tmppriority << 0x04; + + NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; + + /* Enable the Selected IRQ Channels --------------------------------------*/ + NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } + else + { + /* Disable the Selected IRQ Channels -------------------------------------*/ + NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } +} + +/** + * @brief Sets the vector table location and Offset. + * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. + * This parameter can be one of the following values: + * @arg NVIC_VectTab_RAM: Vector Table in internal SRAM. + * @arg NVIC_VectTab_FLASH: Vector Table in internal FLASH. + * @param Offset: Vector Table base offset field. This value must be a multiple of 0x200. + * @retval None + */ +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) +{ + /* Check the parameters */ + assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); + assert_param(IS_NVIC_OFFSET(Offset)); + + SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); +} + +/** + * @brief Selects the condition for the system to enter low power mode. + * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. + * This parameter can be one of the following values: + * @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend. + * @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request. + * @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit. + * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_NVIC_LP(LowPowerMode)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + SCB->SCR |= LowPowerMode; + } + else + { + SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); + } +} + +/** + * @brief Configures the SysTick clock source. + * @param SysTick_CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); + if (SysTick_CLKSource == SysTick_CLKSource_HCLK) + { + SysTick->CTRL |= SysTick_CLKSource_HCLK; + } + else + { + SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/misc.h b/car_llvmkot/src/lib/stdperiph/misc.h new file mode 100644 index 00000000000..7a203eeb680 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/misc.h @@ -0,0 +1,172 @@ +/** + ****************************************************************************** + * @file misc.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the miscellaneous + * firmware library functions (add-on to CMSIS functions). + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MISC_H +#define __MISC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup MISC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief NVIC Init Structure definition + */ + +typedef struct +{ + uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. + This parameter can be an enumerator of @ref IRQn_Type + enumeration (For the complete STM32 Devices IRQ Channels + list, please refer to stm32f4xx.h file) */ + + uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel + specified in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table + A lower priority value indicates a higher priority */ + + uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified + in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table + A lower priority value indicates a higher priority */ + + FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel + will be enabled or disabled. + This parameter can be set either to ENABLE or DISABLE */ +} NVIC_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup MISC_Exported_Constants + * @{ + */ + +/** @defgroup MISC_Vector_Table_Base + * @{ + */ + +#define NVIC_VectTab_RAM ((uint32_t)0x20000000) +#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) +#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ + ((VECTTAB) == NVIC_VectTab_FLASH)) +/** + * @} + */ + +/** @defgroup MISC_System_Low_Power + * @{ + */ + +#define NVIC_LP_SEVONPEND ((uint8_t)0x10) +#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) +#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) +#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ + ((LP) == NVIC_LP_SLEEPDEEP) || \ + ((LP) == NVIC_LP_SLEEPONEXIT)) +/** + * @} + */ + +/** @defgroup MISC_Preemption_Priority_Group + * @{ + */ + +#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ + +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ + ((GROUP) == NVIC_PriorityGroup_1) || \ + ((GROUP) == NVIC_PriorityGroup_2) || \ + ((GROUP) == NVIC_PriorityGroup_3) || \ + ((GROUP) == NVIC_PriorityGroup_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF) + +/** + * @} + */ + +/** @defgroup MISC_SysTick_clock_source + * @{ + */ + +#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) +#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ + ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); + +#ifdef __cplusplus +} +#endif + +#endif /* __MISC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.c new file mode 100644 index 00000000000..ed8783c039b --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.c @@ -0,0 +1,1743 @@ +/** + ****************************************************************************** + * @file stm32f4xx_adc.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Convertor (ADC) peripheral: + * - Initialization and Configuration (in addition to ADC multi mode + * selection) + * - Analog Watchdog configuration + * - Temperature Sensor & Vrefint (Voltage Reference internal) & VBAT + * management + * - Regular Channels Configuration + * - Regular Channels DMA Configuration + * - Injected channels Configuration + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + + * 1. Enable the ADC interface clock using + * RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADCx, ENABLE); + * + * 2. ADC pins configuration + * - Enable the clock for the ADC GPIOs using the following function: + * RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + * - Configure these ADC pins in analog mode using GPIO_Init(); + * + * 3. Configure the ADC Prescaler, conversion resolution and data + * alignment using the ADC_Init() function. + * 4. Activate the ADC peripheral using ADC_Cmd() function. + * + * Regular channels group configuration + * ==================================== + * - To configure the ADC regular channels group features, use + * ADC_Init() and ADC_RegularChannelConfig() functions. + * - To activate the continuous mode, use the ADC_continuousModeCmd() + * function. + * - To configurate and activate the Discontinuous mode, use the + * ADC_DiscModeChannelCountConfig() and ADC_DiscModeCmd() functions. + * - To read the ADC converted values, use the ADC_GetConversionValue() + * function. + * + * Multi mode ADCs Regular channels configuration + * =============================================== + * - Refer to "Regular channels group configuration" description to + * configure the ADC1, ADC2 and ADC3 regular channels. + * - Select the Multi mode ADC regular channels features (dual or + * triple mode) using ADC_CommonInit() function and configure + * the DMA mode using ADC_MultiModeDMARequestAfterLastTransferCmd() + * functions. + * - Read the ADCs converted values using the + * ADC_GetMultiModeConversionValue() function. + * + * DMA for Regular channels group features configuration + * ====================================================== + * - To enable the DMA mode for regular channels group, use the + * ADC_DMACmd() function. + * - To enable the generation of DMA requests continuously at the end + * of the last DMA transfer, use the ADC_DMARequestAfterLastTransferCmd() + * function. + * + * Injected channels group configuration + * ===================================== + * - To configure the ADC Injected channels group features, use + * ADC_InjectedChannelConfig() and ADC_InjectedSequencerLengthConfig() + * functions. + * - To activate the continuous mode, use the ADC_continuousModeCmd() + * function. + * - To activate the Injected Discontinuous mode, use the + * ADC_InjectedDiscModeCmd() function. + * - To activate the AutoInjected mode, use the ADC_AutoInjectedConvCmd() + * function. + * - To read the ADC converted values, use the ADC_GetInjectedConversionValue() + * function. + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_adc.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup ADC + * @brief ADC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ADC DISCNUM mask */ +#define CR1_DISCNUM_RESET ((uint32_t)0xFFFF1FFF) + +/* ADC AWDCH mask */ +#define CR1_AWDCH_RESET ((uint32_t)0xFFFFFFE0) + +/* ADC Analog watchdog enable mode mask */ +#define CR1_AWDMode_RESET ((uint32_t)0xFF3FFDFF) + +/* CR1 register Mask */ +#define CR1_CLEAR_MASK ((uint32_t)0xFCFFFEFF) + +/* ADC EXTEN mask */ +#define CR2_EXTEN_RESET ((uint32_t)0xCFFFFFFF) + +/* ADC JEXTEN mask */ +#define CR2_JEXTEN_RESET ((uint32_t)0xFFCFFFFF) + +/* ADC JEXTSEL mask */ +#define CR2_JEXTSEL_RESET ((uint32_t)0xFFF0FFFF) + +/* CR2 register Mask */ +#define CR2_CLEAR_MASK ((uint32_t)0xC0FFF7FD) + +/* ADC SQx mask */ +#define SQR3_SQ_SET ((uint32_t)0x0000001F) +#define SQR2_SQ_SET ((uint32_t)0x0000001F) +#define SQR1_SQ_SET ((uint32_t)0x0000001F) + +/* ADC L Mask */ +#define SQR1_L_RESET ((uint32_t)0xFF0FFFFF) + +/* ADC JSQx mask */ +#define JSQR_JSQ_SET ((uint32_t)0x0000001F) + +/* ADC JL mask */ +#define JSQR_JL_SET ((uint32_t)0x00300000) +#define JSQR_JL_RESET ((uint32_t)0xFFCFFFFF) + +/* ADC SMPx mask */ +#define SMPR1_SMP_SET ((uint32_t)0x00000007) +#define SMPR2_SMP_SET ((uint32_t)0x00000007) + +/* ADC JDRx registers offset */ +#define JDR_OFFSET ((uint8_t)0x28) + +/* ADC CDR register base address */ +#define CDR_ADDRESS ((uint32_t)0x40012308) + +/* ADC CCR register Mask */ +#define CR_CLEAR_MASK ((uint32_t)0xFFFC30E0) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup ADC_Private_Functions + * @{ + */ + +/** @defgroup ADC_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + This section provides functions allowing to: + - Initialize and configure the ADC Prescaler + - ADC Conversion Resolution (12bit..6bit) + - Scan Conversion Mode (multichannels or one channel) for regular group + - ADC Continuous Conversion Mode (Continuous or Single conversion) for + regular group + - External trigger Edge and source of regular group, + - Converted data alignment (left or right) + - The number of ADC conversions that will be done using the sequencer for + regular channel group + - Multi ADC mode selection + - Direct memory access mode selection for multi ADC mode + - Delay between 2 sampling phases (used in dual or triple interleaved modes) + - Enable or disable the ADC peripheral + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes all ADCs peripherals registers to their default reset + * values. + * @param None + * @retval None + */ +void ADC_DeInit(void) +{ + /* Enable all ADCs reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC, ENABLE); + + /* Release all ADCs from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC, DISABLE); +} + +/** + * @brief Initializes the ADCx peripheral according to the specified parameters + * in the ADC_InitStruct. + * @note This function is used to configure the global features of the ADC ( + * Resolution and Data Alignment), however, the rest of the configuration + * parameters are specific to the regular channels group (scan mode + * activation, continuous mode activation, External trigger source and + * edge, number of conversion in the regular channels group sequencer). + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains + * the configuration information for the specified ADC peripheral. + * @retval None + */ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) +{ + uint32_t tmpreg1 = 0; + uint8_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_RESOLUTION(ADC_InitStruct->ADC_Resolution)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); + assert_param(IS_ADC_EXT_TRIG_EDGE(ADC_InitStruct->ADC_ExternalTrigConvEdge)); + assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); + assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); + assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfConversion)); + + /*---------------------------- ADCx CR1 Configuration -----------------*/ + /* Get the ADCx CR1 value */ + tmpreg1 = ADCx->CR1; + + /* Clear RES and SCAN bits */ + tmpreg1 &= CR1_CLEAR_MASK; + + /* Configure ADCx: scan conversion mode and resolution */ + /* Set SCAN bit according to ADC_ScanConvMode value */ + /* Set RES bit according to ADC_Resolution value */ + tmpreg1 |= (uint32_t)(((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8) | \ + ADC_InitStruct->ADC_Resolution); + /* Write to ADCx CR1 */ + ADCx->CR1 = tmpreg1; + /*---------------------------- ADCx CR2 Configuration -----------------*/ + /* Get the ADCx CR2 value */ + tmpreg1 = ADCx->CR2; + + /* Clear CONT, ALIGN, EXTEN and EXTSEL bits */ + tmpreg1 &= CR2_CLEAR_MASK; + + /* Configure ADCx: external trigger event and edge, data alignment and + continuous conversion mode */ + /* Set ALIGN bit according to ADC_DataAlign value */ + /* Set EXTEN bits according to ADC_ExternalTrigConvEdge value */ + /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ + /* Set CONT bit according to ADC_ContinuousConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | \ + ADC_InitStruct->ADC_ExternalTrigConv | + ADC_InitStruct->ADC_ExternalTrigConvEdge | \ + ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1)); + + /* Write to ADCx CR2 */ + ADCx->CR2 = tmpreg1; + /*---------------------------- ADCx SQR1 Configuration -----------------*/ + /* Get the ADCx SQR1 value */ + tmpreg1 = ADCx->SQR1; + + /* Clear L bits */ + tmpreg1 &= SQR1_L_RESET; + + /* Configure ADCx: regular channel sequence length */ + /* Set L bits according to ADC_NbrOfConversion value */ + tmpreg2 |= (uint8_t)(ADC_InitStruct->ADC_NbrOfConversion - (uint8_t)1); + tmpreg1 |= ((uint32_t)tmpreg2 << 20); + + /* Write to ADCx SQR1 */ + ADCx->SQR1 = tmpreg1; +} + +/** + * @brief Fills each ADC_InitStruct member with its default value. + * @note This function is used to initialize the global features of the ADC ( + * Resolution and Data Alignment), however, the rest of the configuration + * parameters are specific to the regular channels group (scan mode + * activation, continuous mode activation, External trigger source and + * edge, number of conversion in the regular channels group sequencer). + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) +{ + /* Initialize the ADC_Mode member */ + ADC_InitStruct->ADC_Resolution = ADC_Resolution_12b; + + /* initialize the ADC_ScanConvMode member */ + ADC_InitStruct->ADC_ScanConvMode = DISABLE; + + /* Initialize the ADC_ContinuousConvMode member */ + ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; + + /* Initialize the ADC_ExternalTrigConvEdge member */ + ADC_InitStruct->ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None; + + /* Initialize the ADC_ExternalTrigConv member */ + ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; + + /* Initialize the ADC_DataAlign member */ + ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; + + /* Initialize the ADC_NbrOfConversion member */ + ADC_InitStruct->ADC_NbrOfConversion = 1; +} + +/** + * @brief Initializes the ADCs peripherals according to the specified parameters + * in the ADC_CommonInitStruct. + * @param ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure + * that contains the configuration information for All ADCs peripherals. + * @retval None + */ +void ADC_CommonInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct) +{ + uint32_t tmpreg1 = 0; + /* Check the parameters */ + assert_param(IS_ADC_MODE(ADC_CommonInitStruct->ADC_Mode)); + assert_param(IS_ADC_PRESCALER(ADC_CommonInitStruct->ADC_Prescaler)); + assert_param(IS_ADC_DMA_ACCESS_MODE(ADC_CommonInitStruct->ADC_DMAAccessMode)); + assert_param(IS_ADC_SAMPLING_DELAY(ADC_CommonInitStruct->ADC_TwoSamplingDelay)); + /*---------------------------- ADC CCR Configuration -----------------*/ + /* Get the ADC CCR value */ + tmpreg1 = ADC->CCR; + + /* Clear MULTI, DELAY, DMA and ADCPRE bits */ + tmpreg1 &= CR_CLEAR_MASK; + + /* Configure ADCx: Multi mode, Delay between two sampling time, ADC prescaler, + and DMA access mode for multimode */ + /* Set MULTI bits according to ADC_Mode value */ + /* Set ADCPRE bits according to ADC_Prescaler value */ + /* Set DMA bits according to ADC_DMAAccessMode value */ + /* Set DELAY bits according to ADC_TwoSamplingDelay value */ + tmpreg1 |= (uint32_t)(ADC_CommonInitStruct->ADC_Mode | + ADC_CommonInitStruct->ADC_Prescaler | + ADC_CommonInitStruct->ADC_DMAAccessMode | + ADC_CommonInitStruct->ADC_TwoSamplingDelay); + + /* Write to ADC CCR */ + ADC->CCR = tmpreg1; +} + +/** + * @brief Fills each ADC_CommonInitStruct member with its default value. + * @param ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure + * which will be initialized. + * @retval None + */ +void ADC_CommonStructInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct) +{ + /* Initialize the ADC_Mode member */ + ADC_CommonInitStruct->ADC_Mode = ADC_Mode_Independent; + + /* initialize the ADC_Prescaler member */ + ADC_CommonInitStruct->ADC_Prescaler = ADC_Prescaler_Div2; + + /* Initialize the ADC_DMAAccessMode member */ + ADC_CommonInitStruct->ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled; + + /* Initialize the ADC_TwoSamplingDelay member */ + ADC_CommonInitStruct->ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles; +} + +/** + * @brief Enables or disables the specified ADC peripheral. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the ADCx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the ADON bit to wake up the ADC from power down mode */ + ADCx->CR2 |= (uint32_t)ADC_CR2_ADON; + } + else + { + /* Disable the selected ADC peripheral */ + ADCx->CR2 &= (uint32_t)(~ADC_CR2_ADON); + } +} +/** + * @} + */ + +/** @defgroup ADC_Group2 Analog Watchdog configuration functions + * @brief Analog Watchdog configuration functions + * +@verbatim + =============================================================================== + Analog Watchdog configuration functions + =============================================================================== + + This section provides functions allowing to configure the Analog Watchdog + (AWD) feature in the ADC. + + A typical configuration Analog Watchdog is done following these steps : + 1. the ADC guarded channel(s) is (are) selected using the + ADC_AnalogWatchdogSingleChannelConfig() function. + 2. The Analog watchdog lower and higher threshold are configured using the + ADC_AnalogWatchdogThresholdsConfig() function. + 3. The Analog watchdog is enabled and configured to enable the check, on one + or more channels, using the ADC_AnalogWatchdogCmd() function. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the analog watchdog on single/all regular or + * injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration. + * This parameter can be one of the following values: + * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel + * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel + * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel + * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel + * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel + * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels + * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog + * @retval None + */ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); + + /* Get the old register value */ + tmpreg = ADCx->CR1; + + /* Clear AWDEN, JAWDEN and AWDSGL bits */ + tmpreg &= CR1_AWDMode_RESET; + + /* Set the analog watchdog enable mode */ + tmpreg |= ADC_AnalogWatchdog; + + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Configures the high and low thresholds of the analog watchdog. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param HighThreshold: the ADC analog watchdog High threshold value. + * This parameter must be a 12-bit value. + * @param LowThreshold: the ADC analog watchdog Low threshold value. + * This parameter must be a 12-bit value. + * @retval None + */ +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, + uint16_t LowThreshold) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_THRESHOLD(HighThreshold)); + assert_param(IS_ADC_THRESHOLD(LowThreshold)); + + /* Set the ADCx high threshold */ + ADCx->HTR = HighThreshold; + + /* Set the ADCx low threshold */ + ADCx->LTR = LowThreshold; +} + +/** + * @brief Configures the analog watchdog guarded single channel + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure for the analog watchdog. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @arg ADC_Channel_18: ADC Channel18 selected + * @retval None + */ +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + + /* Get the old register value */ + tmpreg = ADCx->CR1; + + /* Clear the Analog watchdog channel select bits */ + tmpreg &= CR1_AWDCH_RESET; + + /* Set the Analog watchdog channel */ + tmpreg |= ADC_Channel; + + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} +/** + * @} + */ + +/** @defgroup ADC_Group3 Temperature Sensor, Vrefint (Voltage Reference internal) + * and VBAT (Voltage BATtery) management functions + * @brief Temperature Sensor, Vrefint and VBAT management functions + * +@verbatim + =============================================================================== + Temperature Sensor, Vrefint and VBAT management functions + =============================================================================== + + This section provides functions allowing to enable/ disable the internal + connections between the ADC and the Temperature Sensor, the Vrefint and the + Vbat sources. + + A typical configuration to get the Temperature sensor and Vrefint channels + voltages is done following these steps : + 1. Enable the internal connection of Temperature sensor and Vrefint sources + with the ADC channels using ADC_TempSensorVrefintCmd() function. + 2. Select the ADC_Channel_TempSensor and/or ADC_Channel_Vrefint using + ADC_RegularChannelConfig() or ADC_InjectedChannelConfig() functions + 3. Get the voltage values, using ADC_GetConversionValue() or + ADC_GetInjectedConversionValue(). + + A typical configuration to get the VBAT channel voltage is done following + these steps : + 1. Enable the internal connection of VBAT source with the ADC channel using + ADC_VBATCmd() function. + 2. Select the ADC_Channel_Vbat using ADC_RegularChannelConfig() or + ADC_InjectedChannelConfig() functions + 3. Get the voltage value, using ADC_GetConversionValue() or + ADC_GetInjectedConversionValue(). + +@endverbatim + * @{ + */ + + +/** + * @brief Enables or disables the temperature sensor and Vrefint channels. + * @param NewState: new state of the temperature sensor and Vrefint channels. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_TempSensorVrefintCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the temperature sensor and Vrefint channel*/ + ADC->CCR |= (uint32_t)ADC_CCR_TSVREFE; + } + else + { + /* Disable the temperature sensor and Vrefint channel*/ + ADC->CCR &= (uint32_t)(~ADC_CCR_TSVREFE); + } +} + +/** + * @brief Enables or disables the VBAT (Voltage Battery) channel. + * @param NewState: new state of the VBAT channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_VBATCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the VBAT channel*/ + ADC->CCR |= (uint32_t)ADC_CCR_VBATE; + } + else + { + /* Disable the VBAT channel*/ + ADC->CCR &= (uint32_t)(~ADC_CCR_VBATE); + } +} + +/** + * @} + */ + +/** @defgroup ADC_Group4 Regular Channels Configuration functions + * @brief Regular Channels Configuration functions + * +@verbatim + =============================================================================== + Regular Channels Configuration functions + =============================================================================== + + This section provides functions allowing to manage the ADC's regular channels, + it is composed of 2 sub sections : + + 1. Configuration and management functions for regular channels: This subsection + provides functions allowing to configure the ADC regular channels : + - Configure the rank in the regular group sequencer for each channel + - Configure the sampling time for each channel + - select the conversion Trigger for regular channels + - select the desired EOC event behavior configuration + - Activate the continuous Mode (*) + - Activate the Discontinuous Mode + Please Note that the following features for regular channels are configurated + using the ADC_Init() function : + - scan mode activation + - continuous mode activation (**) + - External trigger source + - External trigger edge + - number of conversion in the regular channels group sequencer. + + @note (*) and (**) are performing the same configuration + + 2. Get the conversion data: This subsection provides an important function in + the ADC peripheral since it returns the converted data of the current + regular channel. When the Conversion value is read, the EOC Flag is + automatically cleared. + + @note For multi ADC mode, the last ADC1, ADC2 and ADC3 regular conversions + results data (in the selected multi mode) can be returned in the same + time using ADC_GetMultiModeConversionValue() function. + + +@endverbatim + * @{ + */ +/** + * @brief Configures for the selected ADC regular channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @arg ADC_Channel_18: ADC Channel18 selected + * @param Rank: The rank in the regular group sequencer. + * This parameter must be between 1 to 16. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_3Cycles: Sample time equal to 3 cycles + * @arg ADC_SampleTime_15Cycles: Sample time equal to 15 cycles + * @arg ADC_SampleTime_28Cycles: Sample time equal to 28 cycles + * @arg ADC_SampleTime_56Cycles: Sample time equal to 56 cycles + * @arg ADC_SampleTime_84Cycles: Sample time equal to 84 cycles + * @arg ADC_SampleTime_112Cycles: Sample time equal to 112 cycles + * @arg ADC_SampleTime_144Cycles: Sample time equal to 144 cycles + * @arg ADC_SampleTime_480Cycles: Sample time equal to 480 cycles + * @retval None + */ +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_REGULAR_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + + /* if ADC_Channel_10 ... ADC_Channel_18 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_SET << (3 * (ADC_Channel - 10)); + + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); + + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_SET << (3 * ADC_Channel); + + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* For Rank 1 to 6 */ + if (Rank < 7) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR3; + + /* Calculate the mask to clear */ + tmpreg2 = SQR3_SQ_SET << (5 * (Rank - 1)); + + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1)); + + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + + /* Store the new register value */ + ADCx->SQR3 = tmpreg1; + } + /* For Rank 7 to 12 */ + else if (Rank < 13) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR2; + + /* Calculate the mask to clear */ + tmpreg2 = SQR2_SQ_SET << (5 * (Rank - 7)); + + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7)); + + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + + /* Store the new register value */ + ADCx->SQR2 = tmpreg1; + } + /* For Rank 13 to 16 */ + else + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR1; + + /* Calculate the mask to clear */ + tmpreg2 = SQR1_SQ_SET << (5 * (Rank - 13)); + + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13)); + + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + + /* Store the new register value */ + ADCx->SQR1 = tmpreg1; + } +} + +/** + * @brief Enables the selected ADC software start conversion of the regular channels. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_SoftwareStartConv(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Enable the selected ADC conversion for regular group */ + ADCx->CR2 |= (uint32_t)ADC_CR2_SWSTART; +} + +/** + * @brief Gets the selected ADC Software start regular conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Check the status of SWSTART bit */ + if ((ADCx->CR2 & ADC_CR2_JSWSTART) != (uint32_t)RESET) + { + /* SWSTART bit is set */ + bitstatus = SET; + } + else + { + /* SWSTART bit is reset */ + bitstatus = RESET; + } + + /* Return the SWSTART bit status */ + return bitstatus; +} + + +/** + * @brief Enables or disables the EOC on each regular channel conversion + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC EOC flag rising + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_EOCOnEachRegularChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC EOC rising on each regular channel conversion */ + ADCx->CR2 |= (uint32_t)ADC_CR2_EOCS; + } + else + { + /* Disable the selected ADC EOC rising on each regular channel conversion */ + ADCx->CR2 &= (uint32_t)(~ADC_CR2_EOCS); + } +} + +/** + * @brief Enables or disables the ADC continuous conversion mode + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC continuous conversion mode + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC continuous conversion mode */ + ADCx->CR2 |= (uint32_t)ADC_CR2_CONT; + } + else + { + /* Disable the selected ADC continuous conversion mode */ + ADCx->CR2 &= (uint32_t)(~ADC_CR2_CONT); + } +} + +/** + * @brief Configures the discontinuous mode for the selected ADC regular group + * channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Number: specifies the discontinuous mode regular channel count value. + * This number must be between 1 and 8. + * @retval None + */ +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); + + /* Get the old register value */ + tmpreg1 = ADCx->CR1; + + /* Clear the old discontinuous mode channel count */ + tmpreg1 &= CR1_DISCNUM_RESET; + + /* Set the discontinuous mode channel count */ + tmpreg2 = Number - 1; + tmpreg1 |= tmpreg2 << 13; + + /* Store the new register value */ + ADCx->CR1 = tmpreg1; +} + +/** + * @brief Enables or disables the discontinuous mode on regular group channel + * for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode on + * regular group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected ADC regular discontinuous mode */ + ADCx->CR1 |= (uint32_t)ADC_CR1_DISCEN; + } + else + { + /* Disable the selected ADC regular discontinuous mode */ + ADCx->CR1 &= (uint32_t)(~ADC_CR1_DISCEN); + } +} + +/** + * @brief Returns the last ADCx conversion result data for regular channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The Data conversion value. + */ +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Return the selected ADC conversion value */ + return (uint16_t) ADCx->DR; +} + +/** + * @brief Returns the last ADC1, ADC2 and ADC3 regular conversions results + * data in the selected multi mode. + * @param None + * @retval The Data conversion value. + * @note In dual mode, the value returned by this function is as following + * Data[15:0] : these bits contain the regular data of ADC1. + * Data[31:16]: these bits contain the regular data of ADC2. + * @note In triple mode, the value returned by this function is as following + * Data[15:0] : these bits contain alternatively the regular data of ADC1, ADC3 and ADC2. + * Data[31:16]: these bits contain alternatively the regular data of ADC2, ADC1 and ADC3. + */ +uint32_t ADC_GetMultiModeConversionValue(void) +{ + /* Return the multi mode conversion value */ + return (*(__IO uint32_t *) CDR_ADDRESS); +} +/** + * @} + */ + +/** @defgroup ADC_Group5 Regular Channels DMA Configuration functions + * @brief Regular Channels DMA Configuration functions + * +@verbatim + =============================================================================== + Regular Channels DMA Configuration functions + =============================================================================== + + This section provides functions allowing to configure the DMA for ADC regular + channels. + Since converted regular channel values are stored into a unique data register, + it is useful to use DMA for conversion of more than one regular channel. This + avoids the loss of the data already stored in the ADC Data register. + + When the DMA mode is enabled (using the ADC_DMACmd() function), after each + conversion of a regular channel, a DMA request is generated. + + Depending on the "DMA disable selection for Independent ADC mode" + configuration (using the ADC_DMARequestAfterLastTransferCmd() function), + at the end of the last DMA transfer, two possibilities are allowed: + - No new DMA request is issued to the DMA controller (feature DISABLED) + - Requests can continue to be generated (feature ENABLED). + + Depending on the "DMA disable selection for multi ADC mode" configuration + (using the void ADC_MultiModeDMARequestAfterLastTransferCmd() function), + at the end of the last DMA transfer, two possibilities are allowed: + - No new DMA request is issued to the DMA controller (feature DISABLED) + - Requests can continue to be generated (feature ENABLED). + +@endverbatim + * @{ + */ + + /** + * @brief Enables or disables the specified ADC DMA request. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request */ + ADCx->CR2 |= (uint32_t)ADC_CR2_DMA; + } + else + { + /* Disable the selected ADC DMA request */ + ADCx->CR2 &= (uint32_t)(~ADC_CR2_DMA); + } +} + +/** + * @brief Enables or disables the ADC DMA request after last transfer (Single-ADC mode) + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC DMA request after last transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DMARequestAfterLastTransferCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request after last transfer */ + ADCx->CR2 |= (uint32_t)ADC_CR2_DDS; + } + else + { + /* Disable the selected ADC DMA request after last transfer */ + ADCx->CR2 &= (uint32_t)(~ADC_CR2_DDS); + } +} + +/** + * @brief Enables or disables the ADC DMA request after last transfer in multi ADC mode + * @param NewState: new state of the selected ADC DMA request after last transfer. + * This parameter can be: ENABLE or DISABLE. + * @note if Enabled, DMA requests are issued as long as data are converted and + * DMA mode for multi ADC mode (selected using ADC_CommonInit() function + * by ADC_CommonInitStruct.ADC_DMAAccessMode structure member) is + * ADC_DMAAccessMode_1, ADC_DMAAccessMode_2 or ADC_DMAAccessMode_3. + * @retval None + */ +void ADC_MultiModeDMARequestAfterLastTransferCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request after last transfer */ + ADC->CCR |= (uint32_t)ADC_CCR_DDS; + } + else + { + /* Disable the selected ADC DMA request after last transfer */ + ADC->CCR &= (uint32_t)(~ADC_CCR_DDS); + } +} +/** + * @} + */ + +/** @defgroup ADC_Group6 Injected channels Configuration functions + * @brief Injected channels Configuration functions + * +@verbatim + =============================================================================== + Injected channels Configuration functions + =============================================================================== + + This section provide functions allowing to configure the ADC Injected channels, + it is composed of 2 sub sections : + + 1. Configuration functions for Injected channels: This subsection provides + functions allowing to configure the ADC injected channels : + - Configure the rank in the injected group sequencer for each channel + - Configure the sampling time for each channel + - Activate the Auto injected Mode + - Activate the Discontinuous Mode + - scan mode activation + - External/software trigger source + - External trigger edge + - injected channels sequencer. + + 2. Get the Specified Injected channel conversion data: This subsection + provides an important function in the ADC peripheral since it returns the + converted data of the specific injected channel. + +@endverbatim + * @{ + */ +/** + * @brief Configures for the selected ADC injected channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @arg ADC_Channel_18: ADC Channel18 selected + * @param Rank: The rank in the injected group sequencer. + * This parameter must be between 1 to 4. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_3Cycles: Sample time equal to 3 cycles + * @arg ADC_SampleTime_15Cycles: Sample time equal to 15 cycles + * @arg ADC_SampleTime_28Cycles: Sample time equal to 28 cycles + * @arg ADC_SampleTime_56Cycles: Sample time equal to 56 cycles + * @arg ADC_SampleTime_84Cycles: Sample time equal to 84 cycles + * @arg ADC_SampleTime_112Cycles: Sample time equal to 112 cycles + * @arg ADC_SampleTime_144Cycles: Sample time equal to 144 cycles + * @arg ADC_SampleTime_480Cycles: Sample time equal to 480 cycles + * @retval None + */ +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_INJECTED_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + /* if ADC_Channel_10 ... ADC_Channel_18 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_SET << (3*(ADC_Channel - 10)); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10)); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_SET << (3 * ADC_Channel); + /* Clear the old sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* Rank configuration */ + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Get JL value: Number = JL+1 */ + tmpreg3 = (tmpreg1 & JSQR_JL_SET)>> 20; + /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = JSQR_JSQ_SET << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Clear the old JSQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Set the JSQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Configures the sequencer length for injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Length: The sequencer length. + * This parameter must be a number between 1 to 4. + * @retval None + */ +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_LENGTH(Length)); + + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + + /* Clear the old injected sequence length JL bits */ + tmpreg1 &= JSQR_JL_RESET; + + /* Set the injected sequence length JL bits */ + tmpreg2 = Length - 1; + tmpreg1 |= tmpreg2 << 20; + + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Set the injected channels conversion value offset + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the ADC injected channel to set its offset. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @param Offset: the offset value for the selected ADC injected channel + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) +{ + __IO uint32_t tmp = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + assert_param(IS_ADC_OFFSET(Offset)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel; + + /* Set the selected injected channel data offset */ + *(__IO uint32_t *) tmp = (uint32_t)Offset; +} + + /** + * @brief Configures the ADCx external trigger for injected channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion. + * This parameter can be one of the following values: + * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected + * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected + * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected + * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected + * @arg ADC_ExternalTrigInjecConv_T3_CC2: Timer3 capture compare2 selected + * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected + * @arg ADC_ExternalTrigInjecConv_T4_CC1: Timer4 capture compare1 selected + * @arg ADC_ExternalTrigInjecConv_T4_CC2: Timer4 capture compare2 selected + * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected + * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected + * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected + * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected + * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected + * @arg ADC_ExternalTrigInjecConv_T8_CC3: Timer8 capture compare3 selected + * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected + * @arg ADC_ExternalTrigInjecConv_Ext_IT15: External interrupt line 15 event selected + * @retval None + */ +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); + + /* Get the old register value */ + tmpreg = ADCx->CR2; + + /* Clear the old external event selection for injected group */ + tmpreg &= CR2_JEXTSEL_RESET; + + /* Set the external event selection for injected group */ + tmpreg |= ADC_ExternalTrigInjecConv; + + /* Store the new register value */ + ADCx->CR2 = tmpreg; +} + +/** + * @brief Configures the ADCx external trigger edge for injected channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_ExternalTrigInjecConvEdge: specifies the ADC external trigger edge + * to start injected conversion. + * This parameter can be one of the following values: + * @arg ADC_ExternalTrigInjecConvEdge_None: external trigger disabled for + * injected conversion + * @arg ADC_ExternalTrigInjecConvEdge_Rising: detection on rising edge + * @arg ADC_ExternalTrigInjecConvEdge_Falling: detection on falling edge + * @arg ADC_ExternalTrigInjecConvEdge_RisingFalling: detection on both rising + * and falling edge + * @retval None + */ +void ADC_ExternalTrigInjectedConvEdgeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConvEdge) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(ADC_ExternalTrigInjecConvEdge)); + /* Get the old register value */ + tmpreg = ADCx->CR2; + /* Clear the old external trigger edge for injected group */ + tmpreg &= CR2_JEXTEN_RESET; + /* Set the new external trigger edge for injected group */ + tmpreg |= ADC_ExternalTrigInjecConvEdge; + /* Store the new register value */ + ADCx->CR2 = tmpreg; +} + +/** + * @brief Enables the selected ADC software start conversion of the injected channels. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_SoftwareStartInjectedConv(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Enable the selected ADC conversion for injected group */ + ADCx->CR2 |= (uint32_t)ADC_CR2_JSWSTART; +} + +/** + * @brief Gets the selected ADC Software start injected conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start injected conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + /* Check the status of JSWSTART bit */ + if ((ADCx->CR2 & ADC_CR2_JSWSTART) != (uint32_t)RESET) + { + /* JSWSTART bit is set */ + bitstatus = SET; + } + else + { + /* JSWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the JSWSTART bit status */ + return bitstatus; +} + +/** + * @brief Enables or disables the selected ADC automatic injected group + * conversion after regular one. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC auto injected conversion + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC automatic injected group conversion */ + ADCx->CR1 |= (uint32_t)ADC_CR1_JAUTO; + } + else + { + /* Disable the selected ADC automatic injected group conversion */ + ADCx->CR1 &= (uint32_t)(~ADC_CR1_JAUTO); + } +} + +/** + * @brief Enables or disables the discontinuous mode for injected group + * channel for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode on injected + * group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC injected discontinuous mode */ + ADCx->CR1 |= (uint32_t)ADC_CR1_JDISCEN; + } + else + { + /* Disable the selected ADC injected discontinuous mode */ + ADCx->CR1 &= (uint32_t)(~ADC_CR1_JDISCEN); + } +} + +/** + * @brief Returns the ADC injected channel conversion result + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the converted ADC injected channel. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @retval The Data conversion value. + */ +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel + JDR_OFFSET; + + /* Returns the selected injected channel conversion data value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} +/** + * @} + */ + +/** @defgroup ADC_Group7 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + + This section provides functions allowing to configure the ADC Interrupts and + to get the status and clear flags and Interrupts pending bits. + + Each ADC provides 4 Interrupts sources and 6 Flags which can be divided into + 3 groups: + + I. Flags and Interrupts for ADC regular channels + ================================================= + Flags : + ---------- + 1. ADC_FLAG_OVR : Overrun detection when regular converted data are lost + + 2. ADC_FLAG_EOC : Regular channel end of conversion ==> to indicate (depending + on EOCS bit, managed by ADC_EOCOnEachRegularChannelCmd() ) the end of: + ==> a regular CHANNEL conversion + ==> sequence of regular GROUP conversions . + + 3. ADC_FLAG_STRT: Regular channel start ==> to indicate when regular CHANNEL + conversion starts. + + Interrupts : + ------------ + 1. ADC_IT_OVR : specifies the interrupt source for Overrun detection event. + 2. ADC_IT_EOC : specifies the interrupt source for Regular channel end of + conversion event. + + + II. Flags and Interrupts for ADC Injected channels + ================================================= + Flags : + ---------- + 1. ADC_FLAG_JEOC : Injected channel end of conversion ==> to indicate at + the end of injected GROUP conversion + + 2. ADC_FLAG_JSTRT: Injected channel start ==> to indicate hardware when + injected GROUP conversion starts. + + Interrupts : + ------------ + 1. ADC_IT_JEOC : specifies the interrupt source for Injected channel end of + conversion event. + + III. General Flags and Interrupts for the ADC + ================================================= + Flags : + ---------- + 1. ADC_FLAG_AWD: Analog watchdog ==> to indicate if the converted voltage + crosses the programmed thresholds values. + + Interrupts : + ------------ + 1. ADC_IT_AWD : specifies the interrupt source for Analog watchdog event. + + + The user should identify which mode will be used in his application to manage + the ADC controller events: Polling mode or Interrupt mode. + + In the Polling Mode it is advised to use the following functions: + - ADC_GetFlagStatus() : to check if flags events occur. + - ADC_ClearFlag() : to clear the flags events. + + In the Interrupt Mode it is advised to use the following functions: + - ADC_ITConfig() : to enable or disable the interrupt source. + - ADC_GetITStatus() : to check if Interrupt occurs. + - ADC_ClearITPendingBit() : to clear the Interrupt pending Bit + (corresponding Flag). +@endverbatim + * @{ + */ +/** + * @brief Enables or disables the specified ADC interrupts. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @arg ADC_IT_OVR: Overrun interrupt enable + * @param NewState: new state of the specified ADC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState) +{ + uint32_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_ADC_IT(ADC_IT)); + + /* Get the ADC IT index */ + itmask = (uint8_t)ADC_IT; + itmask = (uint32_t)0x01 << itmask; + + if (NewState != DISABLE) + { + /* Enable the selected ADC interrupts */ + ADCx->CR1 |= itmask; + } + else + { + /* Disable the selected ADC interrupts */ + ADCx->CR1 &= (~(uint32_t)itmask); + } +} + +/** + * @brief Checks whether the specified ADC flag is set or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @arg ADC_FLAG_OVR: Overrun flag + * @retval The new state of ADC_FLAG (SET or RESET). + */ +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); + + /* Check the status of the specified ADC flag */ + if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET) + { + /* ADC_FLAG is set */ + bitstatus = SET; + } + else + { + /* ADC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the ADC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's pending flags. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @arg ADC_FLAG_OVR: Overrun flag + * @retval None + */ +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); + + /* Clear the selected ADC flags */ + ADCx->SR = ~(uint32_t)ADC_FLAG; +} + +/** + * @brief Checks whether the specified ADC interrupt has occurred or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt source to check. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @arg ADC_IT_OVR: Overrun interrupt mask + * @retval The new state of ADC_IT (SET or RESET). + */ +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t itmask = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_IT(ADC_IT)); + + /* Get the ADC IT index */ + itmask = ADC_IT >> 8; + + /* Get the ADC_IT enable bit status */ + enablestatus = (ADCx->CR1 & ((uint32_t)0x01 << (uint8_t)ADC_IT)) ; + + /* Check the status of the specified ADC interrupt */ + if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus) + { + /* ADC_IT is set */ + bitstatus = SET; + } + else + { + /* ADC_IT is reset */ + bitstatus = RESET; + } + /* Return the ADC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's interrupt pending bits. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @arg ADC_IT_OVR: Overrun interrupt mask + * @retval None + */ +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + uint8_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = (uint8_t)(ADC_IT >> 8); + /* Clear the selected ADC interrupt pending bits */ + ADCx->SR = ~(uint32_t)itmask; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.h new file mode 100644 index 00000000000..dba848ca74f --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_adc.h @@ -0,0 +1,643 @@ +/** + ****************************************************************************** + * @file stm32f4xx_adc.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the ADC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_ADC_H +#define __STM32F4xx_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief ADC Init structure definition + */ +typedef struct +{ + uint32_t ADC_Resolution; /*!< Configures the ADC resolution dual mode. + This parameter can be a value of @ref ADC_resolution */ + FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion + is performed in Scan (multichannels) + or Single (one channel) mode. + This parameter can be set to ENABLE or DISABLE */ + FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion + is performed in Continuous or Single mode. + This parameter can be set to ENABLE or DISABLE. */ + uint32_t ADC_ExternalTrigConvEdge; /*!< Select the external trigger edge and + enable the trigger of a regular group. + This parameter can be a value of + @ref ADC_external_trigger_edge_for_regular_channels_conversion */ + uint32_t ADC_ExternalTrigConv; /*!< Select the external event used to trigger + the start of conversion of a regular group. + This parameter can be a value of + @ref ADC_extrenal_trigger_sources_for_regular_channels_conversion */ + uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment + is left or right. This parameter can be + a value of @ref ADC_data_align */ + uint8_t ADC_NbrOfConversion; /*!< Specifies the number of ADC conversions + that will be done using the sequencer for + regular channel group. + This parameter must range from 1 to 16. */ +}ADC_InitTypeDef; + +/** + * @brief ADC Common Init structure definition + */ +typedef struct +{ + uint32_t ADC_Mode; /*!< Configures the ADC to operate in + independent or multi mode. + This parameter can be a value of @ref ADC_Common_mode */ + uint32_t ADC_Prescaler; /*!< Select the frequency of the clock + to the ADC. The clock is common for all the ADCs. + This parameter can be a value of @ref ADC_Prescaler */ + uint32_t ADC_DMAAccessMode; /*!< Configures the Direct memory access + mode for multi ADC mode. + This parameter can be a value of + @ref ADC_Direct_memory_access_mode_for_multi_mode */ + uint32_t ADC_TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases. + This parameter can be a value of + @ref ADC_delay_between_2_sampling_phases */ + +}ADC_CommonInitTypeDef; + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants + * @{ + */ +#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ + ((PERIPH) == ADC2) || \ + ((PERIPH) == ADC3)) + +/** @defgroup ADC_Common_mode + * @{ + */ +#define ADC_Mode_Independent ((uint32_t)0x00000000) +#define ADC_DualMode_RegSimult_InjecSimult ((uint32_t)0x00000001) +#define ADC_DualMode_RegSimult_AlterTrig ((uint32_t)0x00000002) +#define ADC_DualMode_InjecSimult ((uint32_t)0x00000005) +#define ADC_DualMode_RegSimult ((uint32_t)0x00000006) +#define ADC_DualMode_Interl ((uint32_t)0x00000007) +#define ADC_DualMode_AlterTrig ((uint32_t)0x00000009) +#define ADC_TripleMode_RegSimult_InjecSimult ((uint32_t)0x00000011) +#define ADC_TripleMode_RegSimult_AlterTrig ((uint32_t)0x00000012) +#define ADC_TripleMode_InjecSimult ((uint32_t)0x00000015) +#define ADC_TripleMode_RegSimult ((uint32_t)0x00000016) +#define ADC_TripleMode_Interl ((uint32_t)0x00000017) +#define ADC_TripleMode_AlterTrig ((uint32_t)0x00000019) +#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \ + ((MODE) == ADC_DualMode_RegSimult_InjecSimult) || \ + ((MODE) == ADC_DualMode_RegSimult_AlterTrig) || \ + ((MODE) == ADC_DualMode_InjecSimult) || \ + ((MODE) == ADC_DualMode_RegSimult) || \ + ((MODE) == ADC_DualMode_Interl) || \ + ((MODE) == ADC_DualMode_AlterTrig) || \ + ((MODE) == ADC_TripleMode_RegSimult_InjecSimult) || \ + ((MODE) == ADC_TripleMode_RegSimult_AlterTrig) || \ + ((MODE) == ADC_TripleMode_InjecSimult) || \ + ((MODE) == ADC_TripleMode_RegSimult) || \ + ((MODE) == ADC_TripleMode_Interl) || \ + ((MODE) == ADC_TripleMode_AlterTrig)) +/** + * @} + */ + + +/** @defgroup ADC_Prescaler + * @{ + */ +#define ADC_Prescaler_Div2 ((uint32_t)0x00000000) +#define ADC_Prescaler_Div4 ((uint32_t)0x00010000) +#define ADC_Prescaler_Div6 ((uint32_t)0x00020000) +#define ADC_Prescaler_Div8 ((uint32_t)0x00030000) +#define IS_ADC_PRESCALER(PRESCALER) (((PRESCALER) == ADC_Prescaler_Div2) || \ + ((PRESCALER) == ADC_Prescaler_Div4) || \ + ((PRESCALER) == ADC_Prescaler_Div6) || \ + ((PRESCALER) == ADC_Prescaler_Div8)) +/** + * @} + */ + + +/** @defgroup ADC_Direct_memory_access_mode_for_multi_mode + * @{ + */ +#define ADC_DMAAccessMode_Disabled ((uint32_t)0x00000000) /* DMA mode disabled */ +#define ADC_DMAAccessMode_1 ((uint32_t)0x00004000) /* DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/ +#define ADC_DMAAccessMode_2 ((uint32_t)0x00008000) /* DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/ +#define ADC_DMAAccessMode_3 ((uint32_t)0x0000C000) /* DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */ +#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAAccessMode_Disabled) || \ + ((MODE) == ADC_DMAAccessMode_1) || \ + ((MODE) == ADC_DMAAccessMode_2) || \ + ((MODE) == ADC_DMAAccessMode_3)) + +/** + * @} + */ + + +/** @defgroup ADC_delay_between_2_sampling_phases + * @{ + */ +#define ADC_TwoSamplingDelay_5Cycles ((uint32_t)0x00000000) +#define ADC_TwoSamplingDelay_6Cycles ((uint32_t)0x00000100) +#define ADC_TwoSamplingDelay_7Cycles ((uint32_t)0x00000200) +#define ADC_TwoSamplingDelay_8Cycles ((uint32_t)0x00000300) +#define ADC_TwoSamplingDelay_9Cycles ((uint32_t)0x00000400) +#define ADC_TwoSamplingDelay_10Cycles ((uint32_t)0x00000500) +#define ADC_TwoSamplingDelay_11Cycles ((uint32_t)0x00000600) +#define ADC_TwoSamplingDelay_12Cycles ((uint32_t)0x00000700) +#define ADC_TwoSamplingDelay_13Cycles ((uint32_t)0x00000800) +#define ADC_TwoSamplingDelay_14Cycles ((uint32_t)0x00000900) +#define ADC_TwoSamplingDelay_15Cycles ((uint32_t)0x00000A00) +#define ADC_TwoSamplingDelay_16Cycles ((uint32_t)0x00000B00) +#define ADC_TwoSamplingDelay_17Cycles ((uint32_t)0x00000C00) +#define ADC_TwoSamplingDelay_18Cycles ((uint32_t)0x00000D00) +#define ADC_TwoSamplingDelay_19Cycles ((uint32_t)0x00000E00) +#define ADC_TwoSamplingDelay_20Cycles ((uint32_t)0x00000F00) +#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TwoSamplingDelay_5Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_6Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_7Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_8Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_9Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_10Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_11Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_12Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_13Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_14Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_15Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_16Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_17Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_18Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_19Cycles) || \ + ((DELAY) == ADC_TwoSamplingDelay_20Cycles)) + +/** + * @} + */ + + +/** @defgroup ADC_resolution + * @{ + */ +#define ADC_Resolution_12b ((uint32_t)0x00000000) +#define ADC_Resolution_10b ((uint32_t)0x01000000) +#define ADC_Resolution_8b ((uint32_t)0x02000000) +#define ADC_Resolution_6b ((uint32_t)0x03000000) +#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_Resolution_12b) || \ + ((RESOLUTION) == ADC_Resolution_10b) || \ + ((RESOLUTION) == ADC_Resolution_8b) || \ + ((RESOLUTION) == ADC_Resolution_6b)) + +/** + * @} + */ + + +/** @defgroup ADC_external_trigger_edge_for_regular_channels_conversion + * @{ + */ +#define ADC_ExternalTrigConvEdge_None ((uint32_t)0x00000000) +#define ADC_ExternalTrigConvEdge_Rising ((uint32_t)0x10000000) +#define ADC_ExternalTrigConvEdge_Falling ((uint32_t)0x20000000) +#define ADC_ExternalTrigConvEdge_RisingFalling ((uint32_t)0x30000000) +#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_ExternalTrigConvEdge_None) || \ + ((EDGE) == ADC_ExternalTrigConvEdge_Rising) || \ + ((EDGE) == ADC_ExternalTrigConvEdge_Falling) || \ + ((EDGE) == ADC_ExternalTrigConvEdge_RisingFalling)) +/** + * @} + */ + + +/** @defgroup ADC_extrenal_trigger_sources_for_regular_channels_conversion + * @{ + */ +#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) +#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x01000000) +#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x02000000) +#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x03000000) +#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x04000000) +#define ADC_ExternalTrigConv_T2_CC4 ((uint32_t)0x05000000) +#define ADC_ExternalTrigConv_T2_TRGO ((uint32_t)0x06000000) +#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x07000000) +#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x08000000) +#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x09000000) +#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x0A000000) +#define ADC_ExternalTrigConv_T5_CC2 ((uint32_t)0x0B000000) +#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x0C000000) +#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x0D000000) +#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x0E000000) +#define ADC_ExternalTrigConv_Ext_IT11 ((uint32_t)0x0F000000) +#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC4) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11)) +/** + * @} + */ + + +/** @defgroup ADC_data_align + * @{ + */ +#define ADC_DataAlign_Right ((uint32_t)0x00000000) +#define ADC_DataAlign_Left ((uint32_t)0x00000800) +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ + ((ALIGN) == ADC_DataAlign_Left)) +/** + * @} + */ + + +/** @defgroup ADC_channels + * @{ + */ +#define ADC_Channel_0 ((uint8_t)0x00) +#define ADC_Channel_1 ((uint8_t)0x01) +#define ADC_Channel_2 ((uint8_t)0x02) +#define ADC_Channel_3 ((uint8_t)0x03) +#define ADC_Channel_4 ((uint8_t)0x04) +#define ADC_Channel_5 ((uint8_t)0x05) +#define ADC_Channel_6 ((uint8_t)0x06) +#define ADC_Channel_7 ((uint8_t)0x07) +#define ADC_Channel_8 ((uint8_t)0x08) +#define ADC_Channel_9 ((uint8_t)0x09) +#define ADC_Channel_10 ((uint8_t)0x0A) +#define ADC_Channel_11 ((uint8_t)0x0B) +#define ADC_Channel_12 ((uint8_t)0x0C) +#define ADC_Channel_13 ((uint8_t)0x0D) +#define ADC_Channel_14 ((uint8_t)0x0E) +#define ADC_Channel_15 ((uint8_t)0x0F) +#define ADC_Channel_16 ((uint8_t)0x10) +#define ADC_Channel_17 ((uint8_t)0x11) +#define ADC_Channel_18 ((uint8_t)0x12) + +#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16) +#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17) +#define ADC_Channel_Vbat ((uint8_t)ADC_Channel_18) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || \ + ((CHANNEL) == ADC_Channel_1) || \ + ((CHANNEL) == ADC_Channel_2) || \ + ((CHANNEL) == ADC_Channel_3) || \ + ((CHANNEL) == ADC_Channel_4) || \ + ((CHANNEL) == ADC_Channel_5) || \ + ((CHANNEL) == ADC_Channel_6) || \ + ((CHANNEL) == ADC_Channel_7) || \ + ((CHANNEL) == ADC_Channel_8) || \ + ((CHANNEL) == ADC_Channel_9) || \ + ((CHANNEL) == ADC_Channel_10) || \ + ((CHANNEL) == ADC_Channel_11) || \ + ((CHANNEL) == ADC_Channel_12) || \ + ((CHANNEL) == ADC_Channel_13) || \ + ((CHANNEL) == ADC_Channel_14) || \ + ((CHANNEL) == ADC_Channel_15) || \ + ((CHANNEL) == ADC_Channel_16) || \ + ((CHANNEL) == ADC_Channel_17) || \ + ((CHANNEL) == ADC_Channel_18)) +/** + * @} + */ + + +/** @defgroup ADC_sampling_times + * @{ + */ +#define ADC_SampleTime_3Cycles ((uint8_t)0x00) +#define ADC_SampleTime_15Cycles ((uint8_t)0x01) +#define ADC_SampleTime_28Cycles ((uint8_t)0x02) +#define ADC_SampleTime_56Cycles ((uint8_t)0x03) +#define ADC_SampleTime_84Cycles ((uint8_t)0x04) +#define ADC_SampleTime_112Cycles ((uint8_t)0x05) +#define ADC_SampleTime_144Cycles ((uint8_t)0x06) +#define ADC_SampleTime_480Cycles ((uint8_t)0x07) +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_3Cycles) || \ + ((TIME) == ADC_SampleTime_15Cycles) || \ + ((TIME) == ADC_SampleTime_28Cycles) || \ + ((TIME) == ADC_SampleTime_56Cycles) || \ + ((TIME) == ADC_SampleTime_84Cycles) || \ + ((TIME) == ADC_SampleTime_112Cycles) || \ + ((TIME) == ADC_SampleTime_144Cycles) || \ + ((TIME) == ADC_SampleTime_480Cycles)) +/** + * @} + */ + + +/** @defgroup ADC_external_trigger_edge_for_injected_channels_conversion + * @{ + */ +#define ADC_ExternalTrigInjecConvEdge_None ((uint32_t)0x00000000) +#define ADC_ExternalTrigInjecConvEdge_Rising ((uint32_t)0x00100000) +#define ADC_ExternalTrigInjecConvEdge_Falling ((uint32_t)0x00200000) +#define ADC_ExternalTrigInjecConvEdge_RisingFalling ((uint32_t)0x00300000) +#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_ExternalTrigInjecConvEdge_None) || \ + ((EDGE) == ADC_ExternalTrigInjecConvEdge_Rising) || \ + ((EDGE) == ADC_ExternalTrigInjecConvEdge_Falling) || \ + ((EDGE) == ADC_ExternalTrigInjecConvEdge_RisingFalling)) + +/** + * @} + */ + + +/** @defgroup ADC_extrenal_trigger_sources_for_injected_channels_conversion + * @{ + */ +#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00000000) +#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00010000) +#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00020000) +#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00030000) +#define ADC_ExternalTrigInjecConv_T3_CC2 ((uint32_t)0x00040000) +#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00050000) +#define ADC_ExternalTrigInjecConv_T4_CC1 ((uint32_t)0x00060000) +#define ADC_ExternalTrigInjecConv_T4_CC2 ((uint32_t)0x00070000) +#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00080000) +#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00090000) +#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x000A0000) +#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x000B0000) +#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x000C0000) +#define ADC_ExternalTrigInjecConv_T8_CC3 ((uint32_t)0x000D0000) +#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x000E0000) +#define ADC_ExternalTrigInjecConv_Ext_IT15 ((uint32_t)0x000F0000) +#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC2) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC2) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC3) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15)) +/** + * @} + */ + + +/** @defgroup ADC_injected_channel_selection + * @{ + */ +#define ADC_InjectedChannel_1 ((uint8_t)0x14) +#define ADC_InjectedChannel_2 ((uint8_t)0x18) +#define ADC_InjectedChannel_3 ((uint8_t)0x1C) +#define ADC_InjectedChannel_4 ((uint8_t)0x20) +#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ + ((CHANNEL) == ADC_InjectedChannel_2) || \ + ((CHANNEL) == ADC_InjectedChannel_3) || \ + ((CHANNEL) == ADC_InjectedChannel_4)) +/** + * @} + */ + + +/** @defgroup ADC_analog_watchdog_selection + * @{ + */ +#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200) +#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200) +#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200) +#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000) +#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000) +#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000) +#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000) +#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_None)) +/** + * @} + */ + + +/** @defgroup ADC_interrupts_definition + * @{ + */ +#define ADC_IT_EOC ((uint16_t)0x0205) +#define ADC_IT_AWD ((uint16_t)0x0106) +#define ADC_IT_JEOC ((uint16_t)0x0407) +#define ADC_IT_OVR ((uint16_t)0x201A) +#define IS_ADC_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \ + ((IT) == ADC_IT_JEOC)|| ((IT) == ADC_IT_OVR)) +/** + * @} + */ + + +/** @defgroup ADC_flags_definition + * @{ + */ +#define ADC_FLAG_AWD ((uint8_t)0x01) +#define ADC_FLAG_EOC ((uint8_t)0x02) +#define ADC_FLAG_JEOC ((uint8_t)0x04) +#define ADC_FLAG_JSTRT ((uint8_t)0x08) +#define ADC_FLAG_STRT ((uint8_t)0x10) +#define ADC_FLAG_OVR ((uint8_t)0x20) + +#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xC0) == 0x00) && ((FLAG) != 0x00)) +#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || \ + ((FLAG) == ADC_FLAG_EOC) || \ + ((FLAG) == ADC_FLAG_JEOC) || \ + ((FLAG)== ADC_FLAG_JSTRT) || \ + ((FLAG) == ADC_FLAG_STRT) || \ + ((FLAG)== ADC_FLAG_OVR)) +/** + * @} + */ + + +/** @defgroup ADC_thresholds + * @{ + */ +#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) +/** + * @} + */ + + +/** @defgroup ADC_injected_offset + * @{ + */ +#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) +/** + * @} + */ + + +/** @defgroup ADC_injected_length + * @{ + */ +#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) +/** + * @} + */ + + +/** @defgroup ADC_injected_rank + * @{ + */ +#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) +/** + * @} + */ + + +/** @defgroup ADC_regular_length + * @{ + */ +#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10)) +/** + * @} + */ + + +/** @defgroup ADC_regular_rank + * @{ + */ +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10)) +/** + * @} + */ + + +/** @defgroup ADC_regular_discontinuous_mode_number + * @{ + */ +#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the ADC configuration to the default reset state *****/ +void ADC_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); +void ADC_CommonInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct); +void ADC_CommonStructInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct); +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); + +/* Analog Watchdog configuration functions ************************************/ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog); +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,uint16_t LowThreshold); +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel); + +/* Temperature Sensor, Vrefint and VBAT management functions ******************/ +void ADC_TempSensorVrefintCmd(FunctionalState NewState); +void ADC_VBATCmd(FunctionalState NewState); + +/* Regular Channels Configuration functions ***********************************/ +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_SoftwareStartConv(ADC_TypeDef* ADCx); +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); +void ADC_EOCOnEachRegularChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number); +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx); +uint32_t ADC_GetMultiModeConversionValue(void); + +/* Regular Channels DMA Configuration functions *******************************/ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DMARequestAfterLastTransferCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_MultiModeDMARequestAfterLastTransferCmd(FunctionalState NewState); + +/* Injected channels Configuration functions **********************************/ +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length); +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset); +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv); +void ADC_ExternalTrigInjectedConvEdgeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConvEdge); +void ADC_SoftwareStartInjectedConv(ADC_TypeDef* ADCx); +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel); + +/* Interrupts and flags management functions **********************************/ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState); +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT); +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_ADC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_can.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_can.c new file mode 100644 index 00000000000..812eaccdf15 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_can.c @@ -0,0 +1,1699 @@ +/** + ****************************************************************************** + * @file stm32f4xx_can.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Controller area network (CAN) peripheral: + * - Initialization and Configuration + * - CAN Frames Transmission + * - CAN Frames Reception + * - Operation modes switch + * - Error management + * - Interrupts and flags + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + + * 1. Enable the CAN controller interface clock using + * RCC_APB1PeriphClockCmd(RCC_APB1Periph_CAN1, ENABLE); for CAN1 + * and RCC_APB1PeriphClockCmd(RCC_APB1Periph_CAN2, ENABLE); for CAN2 + * @note In case you are using CAN2 only, you have to enable the CAN1 clock. + * + * 2. CAN pins configuration + * - Enable the clock for the CAN GPIOs using the following function: + * RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + * - Connect the involved CAN pins to AF9 using the following function + * GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_CANx); + * - Configure these CAN pins in alternate function mode by calling + * the function GPIO_Init(); + * + * 3. Initialise and configure the CAN using CAN_Init() and + * CAN_FilterInit() functions. + * + * 4. Transmit the desired CAN frame using CAN_Transmit() function. + * + * 5. Check the transmission of a CAN frame using CAN_TransmitStatus() + * function. + * + * 6. Cancel the transmission of a CAN frame using CAN_CancelTransmit() + * function. + * + * 7. Receive a CAN frame using CAN_Recieve() function. + * + * 8. Release the receive FIFOs using CAN_FIFORelease() function. + * + * 9. Return the number of pending received frames using + * CAN_MessagePending() function. + * + * 10. To control CAN events you can use one of the following two methods: + * - Check on CAN flags using the CAN_GetFlagStatus() function. + * - Use CAN interrupts through the function CAN_ITConfig() at + * initialization phase and CAN_GetITStatus() function into + * interrupt routines to check if the event has occurred or not. + * After checking on a flag you should clear it using CAN_ClearFlag() + * function. And after checking on an interrupt event you should + * clear it using CAN_ClearITPendingBit() function. + * + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_can.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CAN + * @brief CAN driver modules + * @{ + */ +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* CAN Master Control Register bits */ +#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */ + +/* CAN Mailbox Transmit Request */ +#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */ + +/* CAN Filter Master Register bits */ +#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */ + +/* Time out for INAK bit */ +#define INAK_TIMEOUT ((uint32_t)0x0000FFFF) +/* Time out for SLAK bit */ +#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF) + +/* Flags in TSR register */ +#define CAN_FLAGS_TSR ((uint32_t)0x08000000) +/* Flags in RF1R register */ +#define CAN_FLAGS_RF1R ((uint32_t)0x04000000) +/* Flags in RF0R register */ +#define CAN_FLAGS_RF0R ((uint32_t)0x02000000) +/* Flags in MSR register */ +#define CAN_FLAGS_MSR ((uint32_t)0x01000000) +/* Flags in ESR register */ +#define CAN_FLAGS_ESR ((uint32_t)0x00F00000) + +/* Mailboxes definition */ +#define CAN_TXMAILBOX_0 ((uint8_t)0x00) +#define CAN_TXMAILBOX_1 ((uint8_t)0x01) +#define CAN_TXMAILBOX_2 ((uint8_t)0x02) + +#define CAN_MODE_MASK ((uint32_t) 0x00000003) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit); + +/** @defgroup CAN_Private_Functions + * @{ + */ + +/** @defgroup CAN_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + This section provides functions allowing to + - Initialize the CAN peripherals : Prescaler, operating mode, the maximum number + of time quanta to perform resynchronization, the number of time quanta in + Bit Segment 1 and 2 and many other modes. + Refer to @ref CAN_InitTypeDef for more details. + - Configures the CAN reception filter. + - Select the start bank filter for slave CAN. + - Enables or disables the Debug Freeze mode for CAN + - Enables or disables the CAN Time Trigger Operation communication mode + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the CAN peripheral registers to their default reset values. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @retval None. + */ +void CAN_DeInit(CAN_TypeDef* CANx) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + if (CANx == CAN1) + { + /* Enable CAN1 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE); + /* Release CAN1 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE); + } + else + { + /* Enable CAN2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE); + /* Release CAN2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE); + } +} + +/** + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_InitStruct. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that contains + * the configuration information for the CAN peripheral. + * @retval Constant indicates initialization succeed which will be + * CAN_InitStatus_Failed or CAN_InitStatus_Success. + */ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct) +{ + uint8_t InitStatus = CAN_InitStatus_Failed; + uint32_t wait_ack = 0x00000000; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP)); + assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode)); + assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW)); + assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1)); + assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2)); + assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler)); + + /* Exit from sleep mode */ + CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP); + + /* Request initialisation */ + CANx->MCR |= CAN_MCR_INRQ ; + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* Check acknowledge */ + if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + /* Set the time triggered communication mode */ + if (CAN_InitStruct->CAN_TTCM == ENABLE) + { + CANx->MCR |= CAN_MCR_TTCM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM; + } + + /* Set the automatic bus-off management */ + if (CAN_InitStruct->CAN_ABOM == ENABLE) + { + CANx->MCR |= CAN_MCR_ABOM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM; + } + + /* Set the automatic wake-up mode */ + if (CAN_InitStruct->CAN_AWUM == ENABLE) + { + CANx->MCR |= CAN_MCR_AWUM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM; + } + + /* Set the no automatic retransmission */ + if (CAN_InitStruct->CAN_NART == ENABLE) + { + CANx->MCR |= CAN_MCR_NART; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_NART; + } + + /* Set the receive FIFO locked mode */ + if (CAN_InitStruct->CAN_RFLM == ENABLE) + { + CANx->MCR |= CAN_MCR_RFLM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM; + } + + /* Set the transmit FIFO priority */ + if (CAN_InitStruct->CAN_TXFP == ENABLE) + { + CANx->MCR |= CAN_MCR_TXFP; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP; + } + + /* Set the bit timing register */ + CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \ + ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \ + ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \ + ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \ + ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1); + + /* Request leave initialisation */ + CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ; + + /* Wait the acknowledge */ + wait_ack = 0; + + while (((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* ...and check acknowledged */ + if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + InitStatus = CAN_InitStatus_Success ; + } + } + + /* At this step, return the status of initialization */ + return InitStatus; +} + +/** + * @brief Configures the CAN reception filter according to the specified + * parameters in the CAN_FilterInitStruct. + * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef structure that + * contains the configuration information. + * @retval None + */ +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) +{ + uint32_t filter_number_bit_pos = 0; + /* Check the parameters */ + assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber)); + assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode)); + assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale)); + assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment)); + assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation)); + + filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber; + + /* Initialisation mode for the filter */ + CAN1->FMR |= FMR_FINIT; + + /* Filter Deactivation */ + CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos; + + /* Filter Scale */ + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) + { + /* 16-bit scale for the filter */ + CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos; + + /* First 16-bit identifier and First 16-bit mask */ + /* Or First 16-bit identifier and Second 16-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + + /* Second 16-bit identifier and Second 16-bit mask */ + /* Or Third 16-bit identifier and Fourth 16-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh); + } + + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) + { + /* 32-bit scale for the filter */ + CAN1->FS1R |= filter_number_bit_pos; + /* 32-bit identifier or First 32-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + /* 32-bit mask or Second 32-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow); + } + + /* Filter Mode */ + if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) + { + /*Id/Mask mode for the filter*/ + CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos; + } + else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ + { + /*Identifier list mode for the filter*/ + CAN1->FM1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter FIFO assignment */ + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0) + { + /* FIFO 0 assignation for the filter */ + CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos; + } + + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1) + { + /* FIFO 1 assignation for the filter */ + CAN1->FFA1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter activation */ + if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) + { + CAN1->FA1R |= filter_number_bit_pos; + } + + /* Leave the initialisation mode for the filter */ + CAN1->FMR &= ~FMR_FINIT; +} + +/** + * @brief Fills each CAN_InitStruct member with its default value. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which ill be initialized. + * @retval None + */ +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) +{ + /* Reset CAN init structure parameters values */ + + /* Initialize the time triggered communication mode */ + CAN_InitStruct->CAN_TTCM = DISABLE; + + /* Initialize the automatic bus-off management */ + CAN_InitStruct->CAN_ABOM = DISABLE; + + /* Initialize the automatic wake-up mode */ + CAN_InitStruct->CAN_AWUM = DISABLE; + + /* Initialize the no automatic retransmission */ + CAN_InitStruct->CAN_NART = DISABLE; + + /* Initialize the receive FIFO locked mode */ + CAN_InitStruct->CAN_RFLM = DISABLE; + + /* Initialize the transmit FIFO priority */ + CAN_InitStruct->CAN_TXFP = DISABLE; + + /* Initialize the CAN_Mode member */ + CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; + + /* Initialize the CAN_SJW member */ + CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; + + /* Initialize the CAN_BS1 member */ + CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; + + /* Initialize the CAN_BS2 member */ + CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; + + /* Initialize the CAN_Prescaler member */ + CAN_InitStruct->CAN_Prescaler = 1; +} + +/** + * @brief Select the start bank filter for slave CAN. + * @param CAN_BankNumber: Select the start slave bank filter from 1..27. + * @retval None + */ +void CAN_SlaveStartBank(uint8_t CAN_BankNumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber)); + + /* Enter Initialisation mode for the filter */ + CAN1->FMR |= FMR_FINIT; + + /* Select the start slave bank */ + CAN1->FMR &= (uint32_t)0xFFFFC0F1 ; + CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8; + + /* Leave Initialisation mode for the filter */ + CAN1->FMR &= ~FMR_FINIT; +} + +/** + * @brief Enables or disables the DBG Freeze for CAN. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState: new state of the CAN peripheral. + * This parameter can be: ENABLE (CAN reception/transmission is frozen + * during debug. Reception FIFOs can still be accessed/controlled normally) + * or DISABLE (CAN is working during debug). + * @retval None + */ +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Debug Freeze */ + CANx->MCR |= MCR_DBF; + } + else + { + /* Disable Debug Freeze */ + CANx->MCR &= ~MCR_DBF; + } +} + + +/** + * @brief Enables or disables the CAN Time TriggerOperation communication mode. + * @note DLC must be programmed as 8 in order Time Stamp (2 bytes) to be + * sent over the CAN bus. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState: Mode new state. This parameter can be: ENABLE or DISABLE. + * When enabled, Time stamp (TIME[15:0]) value is sent in the last two + * data bytes of the 8-byte message: TIME[7:0] in data byte 6 and TIME[15:8] + * in data byte 7. + * @retval None + */ +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the TTCM mode */ + CANx->MCR |= CAN_MCR_TTCM; + + /* Set TGT bits */ + CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT); + } + else + { + /* Disable the TTCM mode */ + CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM); + + /* Reset TGT bits */ + CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT); + } +} +/** + * @} + */ + + +/** @defgroup CAN_Group2 CAN Frames Transmission functions + * @brief CAN Frames Transmission functions + * +@verbatim + =============================================================================== + CAN Frames Transmission functions + =============================================================================== + This section provides functions allowing to + - Initiate and transmit a CAN frame message (if there is an empty mailbox). + - Check the transmission status of a CAN Frame + - Cancel a transmit request + +@endverbatim + * @{ + */ + +/** + * @brief Initiates and transmits a CAN frame message. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param TxMessage: pointer to a structure which contains CAN Id, CAN DLC and CAN data. + * @retval The number of the mailbox that is used for transmission or + * CAN_TxStatus_NoMailBox if there is no empty mailbox. + */ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage) +{ + uint8_t transmit_mailbox = 0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IDTYPE(TxMessage->IDE)); + assert_param(IS_CAN_RTR(TxMessage->RTR)); + assert_param(IS_CAN_DLC(TxMessage->DLC)); + + /* Select one empty transmit mailbox */ + if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) + { + transmit_mailbox = 0; + } + else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) + { + transmit_mailbox = 1; + } + else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) + { + transmit_mailbox = 2; + } + else + { + transmit_mailbox = CAN_TxStatus_NoMailBox; + } + + if (transmit_mailbox != CAN_TxStatus_NoMailBox) + { + /* Set up the Id */ + CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ; + if (TxMessage->IDE == CAN_Id_Standard) + { + assert_param(IS_CAN_STDID(TxMessage->StdId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \ + TxMessage->RTR); + } + else + { + assert_param(IS_CAN_EXTID(TxMessage->ExtId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \ + TxMessage->IDE | \ + TxMessage->RTR); + } + + /* Set up the DLC */ + TxMessage->DLC &= (uint8_t)0x0000000F; + CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0; + CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC; + + /* Set up the data field */ + CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) | + ((uint32_t)TxMessage->Data[2] << 16) | + ((uint32_t)TxMessage->Data[1] << 8) | + ((uint32_t)TxMessage->Data[0])); + CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) | + ((uint32_t)TxMessage->Data[6] << 16) | + ((uint32_t)TxMessage->Data[5] << 8) | + ((uint32_t)TxMessage->Data[4])); + /* Request transmission */ + CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ; + } + return transmit_mailbox; +} + +/** + * @brief Checks the transmission status of a CAN Frame. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @param TransmitMailbox: the number of the mailbox that is used for transmission. + * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, + * CAN_TxStatus_Failed in an other case. + */ +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox) +{ + uint32_t state = 0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox)); + + switch (TransmitMailbox) + { + case (CAN_TXMAILBOX_0): + state = CANx->TSR & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0); + break; + case (CAN_TXMAILBOX_1): + state = CANx->TSR & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1); + break; + case (CAN_TXMAILBOX_2): + state = CANx->TSR & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2); + break; + default: + state = CAN_TxStatus_Failed; + break; + } + switch (state) + { + /* transmit pending */ + case (0x0): state = CAN_TxStatus_Pending; + break; + /* transmit failed */ + case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed; + break; + /* transmit succeeded */ + case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok; + break; + default: state = CAN_TxStatus_Failed; + break; + } + return (uint8_t) state; +} + +/** + * @brief Cancels a transmit request. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @param Mailbox: Mailbox number. + * @retval None + */ +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox)); + /* abort transmission */ + switch (Mailbox) + { + case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0; + break; + case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1; + break; + case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2; + break; + default: + break; + } +} +/** + * @} + */ + + +/** @defgroup CAN_Group3 CAN Frames Reception functions + * @brief CAN Frames Reception functions + * +@verbatim + =============================================================================== + CAN Frames Reception functions + =============================================================================== + This section provides functions allowing to + - Receive a correct CAN frame + - Release a specified receive FIFO (2 FIFOs are available) + - Return the number of the pending received CAN frames + +@endverbatim + * @{ + */ + +/** + * @brief Receives a correct CAN frame. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @param RxMessage: pointer to a structure receive frame which contains CAN Id, + * CAN DLC, CAN data and FMI number. + * @retval None + */ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Get the Id */ + RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR; + if (RxMessage->IDE == CAN_Id_Standard) + { + RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21); + } + else + { + RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3); + } + + RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR; + /* Get the DLC */ + RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR; + /* Get the FMI */ + RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8); + /* Get the data field */ + RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR; + RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8); + RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16); + RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24); + RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR; + RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8); + RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16); + RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24); + /* Release the FIFO */ + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Releases the specified receive FIFO. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1. + * @retval None + */ +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Returns the number of pending received messages. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @retval NbMessage : which is the number of pending message. + */ +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + uint8_t message_pending=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + if (FIFONumber == CAN_FIFO0) + { + message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03); + } + else if (FIFONumber == CAN_FIFO1) + { + message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03); + } + else + { + message_pending = 0; + } + return message_pending; +} +/** + * @} + */ + + +/** @defgroup CAN_Group4 CAN Operation modes functions + * @brief CAN Operation modes functions + * +@verbatim + =============================================================================== + CAN Operation modes functions + =============================================================================== + This section provides functions allowing to select the CAN Operation modes + - sleep mode + - normal mode + - initialization mode + +@endverbatim + * @{ + */ + + +/** + * @brief Selects the CAN Operation mode. + * @param CAN_OperatingMode: CAN Operating Mode. + * This parameter can be one of @ref CAN_OperatingMode_TypeDef enumeration. + * @retval status of the requested mode which can be + * - CAN_ModeStatus_Failed: CAN failed entering the specific mode + * - CAN_ModeStatus_Success: CAN Succeed entering the specific mode + */ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode) +{ + uint8_t status = CAN_ModeStatus_Failed; + + /* Timeout for INAK or also for SLAK bits*/ + uint32_t timeout = INAK_TIMEOUT; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode)); + + if (CAN_OperatingMode == CAN_OperatingMode_Initialization) + { + /* Request initialisation */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Normal) + { + /* Request leave initialisation and sleep mode and enter Normal mode */ + CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ)); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != 0) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Sleep) + { + /* Request Sleep mode */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else + { + status = CAN_ModeStatus_Failed; + } + + return (uint8_t) status; +} + +/** + * @brief Enters the Sleep (low power) mode. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @retval CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed otherwise. + */ +uint8_t CAN_Sleep(CAN_TypeDef* CANx) +{ + uint8_t sleepstatus = CAN_Sleep_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Request Sleep mode */ + CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Sleep mode status */ + if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK) + { + /* Sleep mode not entered */ + sleepstatus = CAN_Sleep_Ok; + } + /* return sleep mode status */ + return (uint8_t)sleepstatus; +} + +/** + * @brief Wakes up the CAN peripheral from sleep mode . + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @retval CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed otherwise. + */ +uint8_t CAN_WakeUp(CAN_TypeDef* CANx) +{ + uint32_t wait_slak = SLAK_TIMEOUT; + uint8_t wakeupstatus = CAN_WakeUp_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Wake up request */ + CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP; + + /* Sleep mode status */ + while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00)) + { + wait_slak--; + } + if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK) + { + /* wake up done : Sleep mode exited */ + wakeupstatus = CAN_WakeUp_Ok; + } + /* return wakeup status */ + return (uint8_t)wakeupstatus; +} +/** + * @} + */ + + +/** @defgroup CAN_Group5 CAN Bus Error management functions + * @brief CAN Bus Error management functions + * +@verbatim + =============================================================================== + CAN Bus Error management functions + =============================================================================== + This section provides functions allowing to + - Return the CANx's last error code (LEC) + - Return the CANx Receive Error Counter (REC) + - Return the LSB of the 9-bit CANx Transmit Error Counter(TEC). + + @note If TEC is greater than 255, The CAN is in bus-off state. + @note if REC or TEC are greater than 96, an Error warning flag occurs. + @note if REC or TEC are greater than 127, an Error Passive Flag occurs. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the CANx's last error code (LEC). + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @retval Error code: + * - CAN_ERRORCODE_NoErr: No Error + * - CAN_ERRORCODE_StuffErr: Stuff Error + * - CAN_ERRORCODE_FormErr: Form Error + * - CAN_ERRORCODE_ACKErr : Acknowledgment Error + * - CAN_ERRORCODE_BitRecessiveErr: Bit Recessive Error + * - CAN_ERRORCODE_BitDominantErr: Bit Dominant Error + * - CAN_ERRORCODE_CRCErr: CRC Error + * - CAN_ERRORCODE_SoftwareSetErr: Software Set Error + */ +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx) +{ + uint8_t errorcode=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the error code*/ + errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC); + + /* Return the error code*/ + return errorcode; +} + +/** + * @brief Returns the CANx Receive Error Counter (REC). + * @note In case of an error during reception, this counter is incremented + * by 1 or by 8 depending on the error condition as defined by the CAN + * standard. After every successful reception, the counter is + * decremented by 1 or reset to 120 if its value was higher than 128. + * When the counter value exceeds 127, the CAN controller enters the + * error passive state. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval CAN Receive Error Counter. + */ +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the Receive Error Counter*/ + counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24); + + /* Return the Receive Error Counter*/ + return counter; +} + + +/** + * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC). + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval LSB of the 9-bit CAN Transmit Error Counter. + */ +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16); + + /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + return counter; +} +/** + * @} + */ + +/** @defgroup CAN_Group6 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + + This section provides functions allowing to configure the CAN Interrupts and + to get the status and clear flags and Interrupts pending bits. + + The CAN provides 14 Interrupts sources and 15 Flags: + + =============== + Flags : + =============== + The 15 flags can be divided on 4 groups: + + A. Transmit Flags + ----------------------- + CAN_FLAG_RQCP0, + CAN_FLAG_RQCP1, + CAN_FLAG_RQCP2 : Request completed MailBoxes 0, 1 and 2 Flags + Set when when the last request (transmit or abort) has + been performed. + + B. Receive Flags + ----------------------- + + CAN_FLAG_FMP0, + CAN_FLAG_FMP1 : FIFO 0 and 1 Message Pending Flags + set to signal that messages are pending in the receive + FIFO. + These Flags are cleared only by hardware. + + CAN_FLAG_FF0, + CAN_FLAG_FF1 : FIFO 0 and 1 Full Flags + set when three messages are stored in the selected + FIFO. + + CAN_FLAG_FOV0 + CAN_FLAG_FOV1 : FIFO 0 and 1 Overrun Flags + set when a new message has been received and passed + the filter while the FIFO was full. + + C. Operating Mode Flags + ----------------------- + CAN_FLAG_WKU : Wake up Flag + set to signal that a SOF bit has been detected while + the CAN hardware was in Sleep mode. + + CAN_FLAG_SLAK : Sleep acknowledge Flag + Set to signal that the CAN has entered Sleep Mode. + + D. Error Flags + ----------------------- + CAN_FLAG_EWG : Error Warning Flag + Set when the warning limit has been reached (Receive + Error Counter or Transmit Error Counter greater than 96). + This Flag is cleared only by hardware. + + CAN_FLAG_EPV : Error Passive Flag + Set when the Error Passive limit has been reached + (Receive Error Counter or Transmit Error Counter + greater than 127). + This Flag is cleared only by hardware. + + CAN_FLAG_BOF : Bus-Off Flag + set when CAN enters the bus-off state. The bus-off + state is entered on TEC overflow, greater than 255. + This Flag is cleared only by hardware. + + CAN_FLAG_LEC : Last error code Flag + set If a message has been transferred (reception or + transmission) with error, and the error code is hold. + + =============== + Interrupts : + =============== + The 14 interrupts can be divided on 4 groups: + + A. Transmit interrupt + ----------------------- + CAN_IT_TME : Transmit mailbox empty Interrupt + if enabled, this interrupt source is pending when + no transmit request are pending for Tx mailboxes. + + B. Receive Interrupts + ----------------------- + CAN_IT_FMP0, + CAN_IT_FMP1 : FIFO 0 and FIFO1 message pending Interrupts + if enabled, these interrupt sources are pending when + messages are pending in the receive FIFO. + The corresponding interrupt pending bits are cleared + only by hardware. + + CAN_IT_FF0, + CAN_IT_FF1 : FIFO 0 and FIFO1 full Interrupts + if enabled, these interrupt sources are pending when + three messages are stored in the selected FIFO. + + CAN_IT_FOV0, + CAN_IT_FOV1 : FIFO 0 and FIFO1 overrun Interrupts + if enabled, these interrupt sources are pending when + a new message has been received and passed the filter + while the FIFO was full. + + C. Operating Mode Interrupts + ------------------------------- + CAN_IT_WKU : Wake-up Interrupt + if enabled, this interrupt source is pending when + a SOF bit has been detected while the CAN hardware was + in Sleep mode. + + CAN_IT_SLK : Sleep acknowledge Interrupt + if enabled, this interrupt source is pending when + the CAN has entered Sleep Mode. + + D. Error Interrupts + ----------------------- + CAN_IT_EWG : Error warning Interrupt + if enabled, this interrupt source is pending when + the warning limit has been reached (Receive Error + Counter or Transmit Error Counter=96). + + CAN_IT_EPV : Error passive Interrupt + if enabled, this interrupt source is pending when + the Error Passive limit has been reached (Receive + Error Counter or Transmit Error Counter>127). + + CAN_IT_BOF : Bus-off Interrupt + if enabled, this interrupt source is pending when + CAN enters the bus-off state. The bus-off state is + entered on TEC overflow, greater than 255. + This Flag is cleared only by hardware. + + CAN_IT_LEC : Last error code Interrupt + if enabled, this interrupt source is pending when + a message has been transferred (reception or + transmission) with error, and the error code is hold. + + CAN_IT_ERR : Error Interrupt + if enabled, this interrupt source is pending when + an error condition is pending. + + + Managing the CAN controller events : + ------------------------------------ + The user should identify which mode will be used in his application to manage + the CAN controller events: Polling mode or Interrupt mode. + + 1. In the Polling Mode it is advised to use the following functions: + - CAN_GetFlagStatus() : to check if flags events occur. + - CAN_ClearFlag() : to clear the flags events. + + + + 2. In the Interrupt Mode it is advised to use the following functions: + - CAN_ITConfig() : to enable or disable the interrupt source. + - CAN_GetITStatus() : to check if Interrupt occurs. + - CAN_ClearITPendingBit() : to clear the Interrupt pending Bit (corresponding Flag). + @note This function has no impact on CAN_IT_FMP0 and CAN_IT_FMP1 Interrupts + pending bits since there are cleared only by hardware. + +@endverbatim + * @{ + */ +/** + * @brief Enables or disables the specified CANx interrupts. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg CAN_IT_TME: Transmit mailbox empty Interrupt + * @arg CAN_IT_FMP0: FIFO 0 message pending Interrupt + * @arg CAN_IT_FF0: FIFO 0 full Interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun Interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending Interrupt + * @arg CAN_IT_FF1: FIFO 1 full Interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun Interrupt + * @arg CAN_IT_WKU: Wake-up Interrupt + * @arg CAN_IT_SLK: Sleep acknowledge Interrupt + * @arg CAN_IT_EWG: Error warning Interrupt + * @arg CAN_IT_EPV: Error passive Interrupt + * @arg CAN_IT_BOF: Bus-off Interrupt + * @arg CAN_IT_LEC: Last error code Interrupt + * @arg CAN_IT_ERR: Error Interrupt + * @param NewState: new state of the CAN interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected CANx interrupt */ + CANx->IER |= CAN_IT; + } + else + { + /* Disable the selected CANx interrupt */ + CANx->IER &= ~CAN_IT; + } +} +/** + * @brief Checks whether the specified CAN flag is set or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg CAN_FLAG_RQCP0: Request MailBox0 Flag + * @arg CAN_FLAG_RQCP1: Request MailBox1 Flag + * @arg CAN_FLAG_RQCP2: Request MailBox2 Flag + * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag + * @arg CAN_FLAG_FF0: FIFO 0 Full Flag + * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag + * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag + * @arg CAN_FLAG_FF1: FIFO 1 Full Flag + * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag + * @arg CAN_FLAG_WKU: Wake up Flag + * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag + * @arg CAN_FLAG_EWG: Error Warning Flag + * @arg CAN_FLAG_EPV: Error Passive Flag + * @arg CAN_FLAG_BOF: Bus-Off Flag + * @arg CAN_FLAG_LEC: Last error code Flag + * @retval The new state of CAN_FLAG (SET or RESET). + */ +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_GET_FLAG(CAN_FLAG)); + + + if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */ + { + /* Check the status of the specified CAN flag */ + if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + /* Return the CAN_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the CAN's pending flags. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg CAN_FLAG_RQCP0: Request MailBox0 Flag + * @arg CAN_FLAG_RQCP1: Request MailBox1 Flag + * @arg CAN_FLAG_RQCP2: Request MailBox2 Flag + * @arg CAN_FLAG_FF0: FIFO 0 Full Flag + * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag + * @arg CAN_FLAG_FF1: FIFO 1 Full Flag + * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag + * @arg CAN_FLAG_WKU: Wake up Flag + * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag + * @arg CAN_FLAG_LEC: Last error code Flag + * @retval None + */ +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + uint32_t flagtmp=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG)); + + if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */ + { + /* Clear the selected CAN flags */ + CANx->ESR = (uint32_t)RESET; + } + else /* MSR or TSR or RF0R or RF1R */ + { + flagtmp = CAN_FLAG & 0x000FFFFF; + + if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF0R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF1R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET) + { + /* Transmit Flags */ + CANx->TSR = (uint32_t)(flagtmp); + } + else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */ + { + /* Operating mode Flags */ + CANx->MSR = (uint32_t)(flagtmp); + } + } +} + +/** + * @brief Checks whether the specified CANx interrupt has occurred or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt source to check. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty Interrupt + * @arg CAN_IT_FMP0: FIFO 0 message pending Interrupt + * @arg CAN_IT_FF0: FIFO 0 full Interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun Interrupt + * @arg CAN_IT_FMP1: FIFO 1 message pending Interrupt + * @arg CAN_IT_FF1: FIFO 1 full Interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun Interrupt + * @arg CAN_IT_WKU: Wake-up Interrupt + * @arg CAN_IT_SLK: Sleep acknowledge Interrupt + * @arg CAN_IT_EWG: Error warning Interrupt + * @arg CAN_IT_EPV: Error passive Interrupt + * @arg CAN_IT_BOF: Bus-off Interrupt + * @arg CAN_IT_LEC: Last error code Interrupt + * @arg CAN_IT_ERR: Error Interrupt + * @retval The current state of CAN_IT (SET or RESET). + */ +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + ITStatus itstatus = RESET; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + + /* check the interrupt enable bit */ + if((CANx->IER & CAN_IT) != RESET) + { + /* in case the Interrupt is enabled, .... */ + switch (CAN_IT) + { + case CAN_IT_TME: + /* Check CAN_TSR_RQCPx bits */ + itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2); + break; + case CAN_IT_FMP0: + /* Check CAN_RF0R_FMP0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0); + break; + case CAN_IT_FF0: + /* Check CAN_RF0R_FULL0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0); + break; + case CAN_IT_FOV0: + /* Check CAN_RF0R_FOVR0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0); + break; + case CAN_IT_FMP1: + /* Check CAN_RF1R_FMP1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1); + break; + case CAN_IT_FF1: + /* Check CAN_RF1R_FULL1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1); + break; + case CAN_IT_FOV1: + /* Check CAN_RF1R_FOVR1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1); + break; + case CAN_IT_WKU: + /* Check CAN_MSR_WKUI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI); + break; + case CAN_IT_SLK: + /* Check CAN_MSR_SLAKI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI); + break; + case CAN_IT_EWG: + /* Check CAN_ESR_EWGF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF); + break; + case CAN_IT_EPV: + /* Check CAN_ESR_EPVF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF); + break; + case CAN_IT_BOF: + /* Check CAN_ESR_BOFF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF); + break; + case CAN_IT_LEC: + /* Check CAN_ESR_LEC bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC); + break; + case CAN_IT_ERR: + /* Check CAN_MSR_ERRI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI); + break; + default: + /* in case of error, return RESET */ + itstatus = RESET; + break; + } + } + else + { + /* in case the Interrupt is not enabled, return RESET */ + itstatus = RESET; + } + + /* Return the CAN_IT status */ + return itstatus; +} + +/** + * @brief Clears the CANx's interrupt pending bits. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg CAN_IT_TME: Transmit mailbox empty Interrupt + * @arg CAN_IT_FF0: FIFO 0 full Interrupt + * @arg CAN_IT_FOV0: FIFO 0 overrun Interrupt + * @arg CAN_IT_FF1: FIFO 1 full Interrupt + * @arg CAN_IT_FOV1: FIFO 1 overrun Interrupt + * @arg CAN_IT_WKU: Wake-up Interrupt + * @arg CAN_IT_SLK: Sleep acknowledge Interrupt + * @arg CAN_IT_EWG: Error warning Interrupt + * @arg CAN_IT_EPV: Error passive Interrupt + * @arg CAN_IT_BOF: Bus-off Interrupt + * @arg CAN_IT_LEC: Last error code Interrupt + * @arg CAN_IT_ERR: Error Interrupt + * @retval None + */ +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_IT(CAN_IT)); + + switch (CAN_IT) + { + case CAN_IT_TME: + /* Clear CAN_TSR_RQCPx (rc_w1)*/ + CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2; + break; + case CAN_IT_FF0: + /* Clear CAN_RF0R_FULL0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FULL0; + break; + case CAN_IT_FOV0: + /* Clear CAN_RF0R_FOVR0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FOVR0; + break; + case CAN_IT_FF1: + /* Clear CAN_RF1R_FULL1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FULL1; + break; + case CAN_IT_FOV1: + /* Clear CAN_RF1R_FOVR1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FOVR1; + break; + case CAN_IT_WKU: + /* Clear CAN_MSR_WKUI (rc_w1)*/ + CANx->MSR = CAN_MSR_WKUI; + break; + case CAN_IT_SLK: + /* Clear CAN_MSR_SLAKI (rc_w1)*/ + CANx->MSR = CAN_MSR_SLAKI; + break; + case CAN_IT_EWG: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* @note the corresponding Flag is cleared by hardware depending on the CAN Bus status*/ + break; + case CAN_IT_EPV: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* @note the corresponding Flag is cleared by hardware depending on the CAN Bus status*/ + break; + case CAN_IT_BOF: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* @note the corresponding Flag is cleared by hardware depending on the CAN Bus status*/ + break; + case CAN_IT_LEC: + /* Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + break; + case CAN_IT_ERR: + /*Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* @note BOFF, EPVF and EWGF Flags are cleared by hardware depending on the CAN Bus status*/ + break; + default: + break; + } +} + /** + * @} + */ + +/** + * @brief Checks whether the CAN interrupt has occurred or not. + * @param CAN_Reg: specifies the CAN interrupt register to check. + * @param It_Bit: specifies the interrupt source bit to check. + * @retval The new state of the CAN Interrupt (SET or RESET). + */ +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit) +{ + ITStatus pendingbitstatus = RESET; + + if ((CAN_Reg & It_Bit) != (uint32_t)RESET) + { + /* CAN_IT is set */ + pendingbitstatus = SET; + } + else + { + /* CAN_IT is reset */ + pendingbitstatus = RESET; + } + return pendingbitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_can.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_can.h new file mode 100644 index 00000000000..46d92b36691 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_can.h @@ -0,0 +1,638 @@ +/** + ****************************************************************************** + * @file stm32f4xx_can.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the CAN firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_CAN_H +#define __STM32F4xx_CAN_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CAN + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \ + ((PERIPH) == CAN2)) + +/** + * @brief CAN init structure definition + */ +typedef struct +{ + uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. + It ranges from 1 to 1024. */ + + uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. + This parameter can be a value of @ref CAN_operating_mode */ + + uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta + the CAN hardware is allowed to lengthen or + shorten a bit to perform resynchronization. + This parameter can be a value of @ref CAN_synchronisation_jump_width */ + + uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit + Segment 1. This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_1 */ + + uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit Segment 2. + This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */ + + FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered communication mode. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off management. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_NART; /*!< Enable or disable the non-automatic retransmission mode. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. + This parameter can be set either to ENABLE or DISABLE. */ + + FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. + This parameter can be set either to ENABLE or DISABLE. */ +} CAN_InitTypeDef; + +/** + * @brief CAN filter init structure definition + */ +typedef struct +{ + uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit + configuration, first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit + configuration, second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, + according to the mode (MSBs for a 32-bit configuration, + first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, + according to the mode (LSBs for a 32-bit configuration, + second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. + This parameter can be a value of @ref CAN_filter_FIFO */ + + uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ + + uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. + This parameter can be a value of @ref CAN_filter_mode */ + + uint8_t CAN_FilterScale; /*!< Specifies the filter scale. + This parameter can be a value of @ref CAN_filter_scale */ + + FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. + This parameter can be set either to ENABLE or DISABLE. */ +} CAN_FilterInitTypeDef; + +/** + * @brief CAN Tx message structure definition + */ +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be transmitted. This parameter can be a value + of @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the message that will + be transmitted. This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be + transmitted. This parameter can be a value between + 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 + to 0xFF. */ +} CanTxMsg; + +/** + * @brief CAN Rx message structure definition + */ +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be received. This parameter can be a value of + @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the received message. + This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be received. + This parameter can be a value between 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to + 0xFF. */ + + uint8_t FMI; /*!< Specifies the index of the filter the message stored in + the mailbox passes through. This parameter can be a + value between 0 to 0xFF */ +} CanRxMsg; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CAN_Exported_Constants + * @{ + */ + +/** @defgroup CAN_InitStatus + * @{ + */ + +#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */ +#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */ + + +/* Legacy defines */ +#define CANINITFAILED CAN_InitStatus_Failed +#define CANINITOK CAN_InitStatus_Success +/** + * @} + */ + +/** @defgroup CAN_operating_mode + * @{ + */ + +#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ +#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ +#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ +#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ + +#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \ + ((MODE) == CAN_Mode_LoopBack)|| \ + ((MODE) == CAN_Mode_Silent) || \ + ((MODE) == CAN_Mode_Silent_LoopBack)) +/** + * @} + */ + + + /** + * @defgroup CAN_operating_mode + * @{ + */ +#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */ +#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */ +#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */ + + +#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\ + ((MODE) == CAN_OperatingMode_Normal)|| \ + ((MODE) == CAN_OperatingMode_Sleep)) +/** + * @} + */ + +/** + * @defgroup CAN_operating_mode_status + * @{ + */ + +#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */ +#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */ +/** + * @} + */ + +/** @defgroup CAN_synchronisation_jump_width + * @{ + */ +#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ + +#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ + ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_1 + * @{ + */ +#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ +#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ +#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ +#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ +#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ +#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ +#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ +#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ +#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ + +#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_2 + * @{ + */ +#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ + +#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) +/** + * @} + */ + +/** @defgroup CAN_clock_prescaler + * @{ + */ +#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) +/** + * @} + */ + +/** @defgroup CAN_filter_number + * @{ + */ +#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) +/** + * @} + */ + +/** @defgroup CAN_filter_mode + * @{ + */ +#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */ +#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ + +#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ + ((MODE) == CAN_FilterMode_IdList)) +/** + * @} + */ + +/** @defgroup CAN_filter_scale + * @{ + */ +#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ +#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ + +#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ + ((SCALE) == CAN_FilterScale_32bit)) +/** + * @} + */ + +/** @defgroup CAN_filter_FIFO + * @{ + */ +#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ +#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ +#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ + ((FIFO) == CAN_FilterFIFO1)) + +/* Legacy defines */ +#define CAN_FilterFIFO0 CAN_Filter_FIFO0 +#define CAN_FilterFIFO1 CAN_Filter_FIFO1 +/** + * @} + */ + +/** @defgroup CAN_Start_bank_filter_for_slave_CAN + * @{ + */ +#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) +/** + * @} + */ + +/** @defgroup CAN_Tx + * @{ + */ +#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) +#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) +#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) +#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) +/** + * @} + */ + +/** @defgroup CAN_identifier_type + * @{ + */ +#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */ +#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */ +#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \ + ((IDTYPE) == CAN_Id_Extended)) + +/* Legacy defines */ +#define CAN_ID_STD CAN_Id_Standard +#define CAN_ID_EXT CAN_Id_Extended +/** + * @} + */ + +/** @defgroup CAN_remote_transmission_request + * @{ + */ +#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */ +#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */ +#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) + +/* Legacy defines */ +#define CAN_RTR_DATA CAN_RTR_Data +#define CAN_RTR_REMOTE CAN_RTR_Remote +/** + * @} + */ + +/** @defgroup CAN_transmit_constants + * @{ + */ +#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */ +#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */ +#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */ +#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide + an empty mailbox */ +/* Legacy defines */ +#define CANTXFAILED CAN_TxStatus_Failed +#define CANTXOK CAN_TxStatus_Ok +#define CANTXPENDING CAN_TxStatus_Pending +#define CAN_NO_MB CAN_TxStatus_NoMailBox +/** + * @} + */ + +/** @defgroup CAN_receive_FIFO_number_constants + * @{ + */ +#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ +#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ + +#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) +/** + * @} + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ +#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ +#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */ + +/* Legacy defines */ +#define CANSLEEPFAILED CAN_Sleep_Failed +#define CANSLEEPOK CAN_Sleep_Ok +/** + * @} + */ + +/** @defgroup CAN_wake_up_constants + * @{ + */ +#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ +#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ + +/* Legacy defines */ +#define CANWAKEUPFAILED CAN_WakeUp_Failed +#define CANWAKEUPOK CAN_WakeUp_Ok +/** + * @} + */ + +/** + * @defgroup CAN_Error_Code_constants + * @{ + */ +#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */ +#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */ +#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */ +#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */ +#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ +#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */ +#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */ +#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */ +/** + * @} + */ + +/** @defgroup CAN_flags + * @{ + */ +/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() + and CAN_ClearFlag() functions. */ +/* If the flag is 0x1XXXXXXX, it means that it can only be used with + CAN_GetFlagStatus() function. */ + +/* Transmit Flags */ +#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */ +#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */ +#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */ + +/* Receive Flags */ +#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */ +#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */ +#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */ +#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */ +#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */ +#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */ + +/* Operating Mode Flags */ +#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */ +#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */ +/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. + In this case the SLAK bit can be polled.*/ + +/* Error Flags */ +#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */ +#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */ +#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */ +#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */ + +#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \ + ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \ + ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \ + ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_SLAK )) + +#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\ + ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK)) +/** + * @} + */ + + +/** @defgroup CAN_interrupts + * @{ + */ +#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/ + +/* Receive Interrupts */ +#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/ +#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/ +#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/ +#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/ +#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/ +#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/ + +/* Operating Mode Interrupts */ +#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/ +#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/ + +/* Error Interrupts */ +#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/ +#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/ +#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/ +#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/ +#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/ + +/* Flags named as Interrupts : kept only for FW compatibility */ +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME + + +#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ + ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ + ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\ + ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the CAN configuration to the default reset state *****/ +void CAN_DeInit(CAN_TypeDef* CANx); + +/* Initialization and Configuration functions *********************************/ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); +void CAN_SlaveStartBank(uint8_t CAN_BankNumber); +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState); + +/* CAN Frames Transmission functions ******************************************/ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); + +/* CAN Frames Reception functions *********************************************/ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); + +/* Operation modes functions **************************************************/ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode); +uint8_t CAN_Sleep(CAN_TypeDef* CANx); +uint8_t CAN_WakeUp(CAN_TypeDef* CANx); + +/* CAN Bus Error management functions *****************************************/ +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx); +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx); +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx); + +/* Interrupts and flags management functions **********************************/ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_CAN_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.c new file mode 100644 index 00000000000..5709980803e --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.c @@ -0,0 +1,127 @@ +/** + ****************************************************************************** + * @file stm32f4xx_crc.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides all the CRC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_crc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRC + * @brief CRC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRC_Private_Functions + * @{ + */ + +/** + * @brief Resets the CRC Data register (DR). + * @param None + * @retval None + */ +void CRC_ResetDR(void) +{ + /* Reset CRC generator */ + CRC->CR = CRC_CR_RESET; +} + +/** + * @brief Computes the 32-bit CRC of a given data word(32-bit). + * @param Data: data word(32-bit) to compute its CRC + * @retval 32-bit CRC + */ +uint32_t CRC_CalcCRC(uint32_t Data) +{ + CRC->DR = Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit). + * @param pBuffer: pointer to the buffer containing the data to be computed + * @param BufferLength: length of the buffer to be computed + * @retval 32-bit CRC + */ +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + for(index = 0; index < BufferLength; index++) + { + CRC->DR = pBuffer[index]; + } + return (CRC->DR); +} + +/** + * @brief Returns the current CRC value. + * @param None + * @retval 32-bit CRC + */ +uint32_t CRC_GetCRC(void) +{ + return (CRC->DR); +} + +/** + * @brief Stores a 8-bit data in the Independent Data(ID) register. + * @param IDValue: 8-bit value to be stored in the ID register + * @retval None + */ +void CRC_SetIDRegister(uint8_t IDValue) +{ + CRC->IDR = IDValue; +} + +/** + * @brief Returns the 8-bit data stored in the Independent Data(ID) register + * @param None + * @retval 8-bit value of the ID register + */ +uint8_t CRC_GetIDRegister(void) +{ + return (CRC->IDR); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.h new file mode 100644 index 00000000000..ace4ee9d108 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_crc.h @@ -0,0 +1,77 @@ +/** + ****************************************************************************** + * @file stm32f4xx_crc.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the CRC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_CRC_H +#define __STM32F4xx_CRC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CRC_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +void CRC_ResetDR(void); +uint32_t CRC_CalcCRC(uint32_t Data); +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength); +uint32_t CRC_GetCRC(void); +void CRC_SetIDRegister(uint8_t IDValue); +uint8_t CRC_GetIDRegister(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_CRC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp.c new file mode 100644 index 00000000000..8a5b2aa75e5 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp.c @@ -0,0 +1,851 @@ +/** + ****************************************************************************** + * @file stm32f4xx_cryp.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Cryptographic processor (CRYP) peripheral: + * - Initialization and Configuration functions + * - Data treatment functions + * - Context swapping functions + * - DMA interface function + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. Enable the CRYP controller clock using + * RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_CRYP, ENABLE); function. + * + * 2. Initialise the CRYP using CRYP_Init(), CRYP_KeyInit() and if + * needed CRYP_IVInit(). + * + * 3. Flush the IN and OUT FIFOs by using CRYP_FIFOFlush() function. + * + * 4. Enable the CRYP controller using the CRYP_Cmd() function. + * + * 5. If using DMA for Data input and output transfer, + * Activate the needed DMA Requests using CRYP_DMACmd() function + + * 6. If DMA is not used for data transfer, use CRYP_DataIn() and + * CRYP_DataOut() functions to enter data to IN FIFO and get result + * from OUT FIFO. + * + * 7. To control CRYP events you can use one of the following + * two methods: + * - Check on CRYP flags using the CRYP_GetFlagStatus() function. + * - Use CRYP interrupts through the function CRYP_ITConfig() at + * initialization phase and CRYP_GetITStatus() function into + * interrupt routines in processing phase. + * + * 8. Save and restore Cryptographic processor context using + * CRYP_SaveContext() and CRYP_RestoreContext() functions. + * + * + * =================================================================== + * Procedure to perform an encryption or a decryption + * =================================================================== + * + * Initialization + * =============== + * 1. Initialize the peripheral using CRYP_Init(), CRYP_KeyInit() and + * CRYP_IVInit functions: + * - Configure the key size (128-, 192- or 256-bit, in the AES only) + * - Enter the symmetric key + * - Configure the data type + * - In case of decryption in AES-ECB or AES-CBC, you must prepare + * the key: configure the key preparation mode. Then Enable the CRYP + * peripheral using CRYP_Cmd() function: the BUSY flag is set. + * Wait until BUSY flag is reset : the key is prepared for decryption + * - Configure the algorithm and chaining (the DES/TDES in ECB/CBC, the + * AES in ECB/CBC/CTR) + * - Configure the direction (encryption/decryption). + * - Write the initialization vectors (in CBC or CTR modes only) + * + * 2. Flush the IN and OUT FIFOs using the CRYP_FIFOFlush() function + * + * + * Basic Processing mode (polling mode) + * ==================================== + * 1. Enable the cryptographic processor using CRYP_Cmd() function. + * + * 2. Write the first blocks in the input FIFO (2 to 8 words) using + * CRYP_DataIn() function. + * + * 3. Repeat the following sequence until the complete message has been + * processed: + * + * a) Wait for flag CRYP_FLAG_OFNE occurs (using CRYP_GetFlagStatus() + * function), then read the OUT-FIFO using CRYP_DataOut() function + * (1 block or until the FIFO is empty) + * + * b) Wait for flag CRYP_FLAG_IFNF occurs, (using CRYP_GetFlagStatus() + * function then write the IN FIFO using CRYP_DataIn() function + * (1 block or until the FIFO is full) + * + * 4. At the end of the processing, CRYP_FLAG_BUSY flag will be reset and + * both FIFOs are empty (CRYP_FLAG_IFEM is set and CRYP_FLAG_OFNE is + * reset). You can disable the peripheral using CRYP_Cmd() function. + * + * Interrupts Processing mode + * =========================== + * In this mode, Processing is done when the data are transferred by the + * CPU during interrupts. + * + * 1. Enable the interrupts CRYP_IT_INI and CRYP_IT_OUTI using + * CRYP_ITConfig() function. + * + * 2. Enable the cryptographic processor using CRYP_Cmd() function. + * + * 3. In the CRYP_IT_INI interrupt handler : load the input message into the + * IN FIFO using CRYP_DataIn() function . You can load 2 or 4 words at a + * time, or load data until the IN FIFO is full. When the last word of + * the message has been entered into the IN FIFO, disable the CRYP_IT_INI + * interrupt (using CRYP_ITConfig() function). + * + * 4. In the CRYP_IT_OUTI interrupt handler : read the output message from + * the OUT FIFO using CRYP_DataOut() function. You can read 1 block (2 or + * 4 words) at a time or read data until the FIFO is empty. + * When the last word has been read, INIM=0, BUSY=0 and both FIFOs are + * empty (CRYP_FLAG_IFEM is set and CRYP_FLAG_OFNE is reset). + * You can disable the CRYP_IT_OUTI interrupt (using CRYP_ITConfig() + * function) and you can disable the peripheral using CRYP_Cmd() function. + * + * DMA Processing mode + * ==================== + * In this mode, Processing is done when the DMA is used to transfer the + * data from/to the memory. + * + * 1. Configure the DMA controller to transfer the input data from the + * memory using DMA_Init() function. + * The transfer length is the length of the message. + * As message padding is not managed by the peripheral, the message + * length must be an entire number of blocks. The data are transferred + * in burst mode. The burst length is 4 words in the AES and 2 or 4 + * words in the DES/TDES. The DMA should be configured to set an + * interrupt on transfer completion of the output data to indicate that + * the processing is finished. + * Refer to DMA peripheral driver for more details. + * + * 2. Enable the cryptographic processor using CRYP_Cmd() function. + * Enable the DMA requests CRYP_DMAReq_DataIN and CRYP_DMAReq_DataOUT + * using CRYP_DMACmd() function. + * + * 3. All the transfers and processing are managed by the DMA and the + * cryptographic processor. The DMA transfer complete interrupt indicates + * that the processing is complete. Both FIFOs are normally empty and + * CRYP_FLAG_BUSY flag is reset. + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_cryp.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRYP + * @brief CRYP driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define FLAG_MASK ((uint8_t)0x20) +#define MAX_TIMEOUT ((uint16_t)0xFFFF) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRYP_Private_Functions + * @{ + */ + +/** @defgroup CRYP_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + This section provides functions allowing to + - Initialize the cryptographic Processor using CRYP_Init() function + - Encrypt or Decrypt + - mode : TDES-ECB, TDES-CBC, + DES-ECB, DES-CBC, + AES-ECB, AES-CBC, AES-CTR, AES-Key + - DataType : 32-bit data, 16-bit data, bit data or bit-string + - Key Size (only in AES modes) + - Configure the Encrypt or Decrypt Key using CRYP_KeyInit() function + - Configure the Initialization Vectors(IV) for CBC and CTR modes using + CRYP_IVInit() function. + - Flushes the IN and OUT FIFOs : using CRYP_FIFOFlush() function. + - Enable or disable the CRYP Processor using CRYP_Cmd() function + + +@endverbatim + * @{ + */ +/** + * @brief Deinitializes the CRYP peripheral registers to their default reset values + * @param None + * @retval None + */ +void CRYP_DeInit(void) +{ + /* Enable CRYP reset state */ + RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_CRYP, ENABLE); + + /* Release CRYP from reset state */ + RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_CRYP, DISABLE); +} + +/** + * @brief Initializes the CRYP peripheral according to the specified parameters + * in the CRYP_InitStruct. + * @param CRYP_InitStruct: pointer to a CRYP_InitTypeDef structure that contains + * the configuration information for the CRYP peripheral. + * @retval None + */ +void CRYP_Init(CRYP_InitTypeDef* CRYP_InitStruct) +{ + /* Check the parameters */ + assert_param(IS_CRYP_ALGOMODE(CRYP_InitStruct->CRYP_AlgoMode)); + assert_param(IS_CRYP_DATATYPE(CRYP_InitStruct->CRYP_DataType)); + assert_param(IS_CRYP_ALGODIR(CRYP_InitStruct->CRYP_AlgoDir)); + + /* Select Algorithm mode*/ + CRYP->CR &= ~CRYP_CR_ALGOMODE; + CRYP->CR |= CRYP_InitStruct->CRYP_AlgoMode; + + /* Select dataType */ + CRYP->CR &= ~CRYP_CR_DATATYPE; + CRYP->CR |= CRYP_InitStruct->CRYP_DataType; + + /* select Key size (used only with AES algorithm) */ + if ((CRYP_InitStruct->CRYP_AlgoMode == CRYP_AlgoMode_AES_ECB) || + (CRYP_InitStruct->CRYP_AlgoMode == CRYP_AlgoMode_AES_CBC) || + (CRYP_InitStruct->CRYP_AlgoMode == CRYP_AlgoMode_AES_CTR) || + (CRYP_InitStruct->CRYP_AlgoMode == CRYP_AlgoMode_AES_Key)) + { + assert_param(IS_CRYP_KEYSIZE(CRYP_InitStruct->CRYP_KeySize)); + CRYP->CR &= ~CRYP_CR_KEYSIZE; + CRYP->CR |= CRYP_InitStruct->CRYP_KeySize; /* Key size and value must be + configured once the key has + been prepared */ + } + + /* Select data Direction */ + CRYP->CR &= ~CRYP_CR_ALGODIR; + CRYP->CR |= CRYP_InitStruct->CRYP_AlgoDir; +} + +/** + * @brief Fills each CRYP_InitStruct member with its default value. + * @param CRYP_InitStruct: pointer to a CRYP_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void CRYP_StructInit(CRYP_InitTypeDef* CRYP_InitStruct) +{ + /* Initialize the CRYP_AlgoDir member */ + CRYP_InitStruct->CRYP_AlgoDir = CRYP_AlgoDir_Encrypt; + + /* initialize the CRYP_AlgoMode member */ + CRYP_InitStruct->CRYP_AlgoMode = CRYP_AlgoMode_TDES_ECB; + + /* initialize the CRYP_DataType member */ + CRYP_InitStruct->CRYP_DataType = CRYP_DataType_32b; + + /* Initialize the CRYP_KeySize member */ + CRYP_InitStruct->CRYP_KeySize = CRYP_KeySize_128b; +} + +/** + * @brief Initializes the CRYP Keys according to the specified parameters in + * the CRYP_KeyInitStruct. + * @param CRYP_KeyInitStruct: pointer to a CRYP_KeyInitTypeDef structure that + * contains the configuration information for the CRYP Keys. + * @retval None + */ +void CRYP_KeyInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct) +{ + /* Key Initialisation */ + CRYP->K0LR = CRYP_KeyInitStruct->CRYP_Key0Left; + CRYP->K0RR = CRYP_KeyInitStruct->CRYP_Key0Right; + CRYP->K1LR = CRYP_KeyInitStruct->CRYP_Key1Left; + CRYP->K1RR = CRYP_KeyInitStruct->CRYP_Key1Right; + CRYP->K2LR = CRYP_KeyInitStruct->CRYP_Key2Left; + CRYP->K2RR = CRYP_KeyInitStruct->CRYP_Key2Right; + CRYP->K3LR = CRYP_KeyInitStruct->CRYP_Key3Left; + CRYP->K3RR = CRYP_KeyInitStruct->CRYP_Key3Right; +} + +/** + * @brief Fills each CRYP_KeyInitStruct member with its default value. + * @param CRYP_KeyInitStruct: pointer to a CRYP_KeyInitTypeDef structure + * which will be initialized. + * @retval None + */ +void CRYP_KeyStructInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct) +{ + CRYP_KeyInitStruct->CRYP_Key0Left = 0; + CRYP_KeyInitStruct->CRYP_Key0Right = 0; + CRYP_KeyInitStruct->CRYP_Key1Left = 0; + CRYP_KeyInitStruct->CRYP_Key1Right = 0; + CRYP_KeyInitStruct->CRYP_Key2Left = 0; + CRYP_KeyInitStruct->CRYP_Key2Right = 0; + CRYP_KeyInitStruct->CRYP_Key3Left = 0; + CRYP_KeyInitStruct->CRYP_Key3Right = 0; +} +/** + * @brief Initializes the CRYP Initialization Vectors(IV) according to the + * specified parameters in the CRYP_IVInitStruct. + * @param CRYP_IVInitStruct: pointer to a CRYP_IVInitTypeDef structure that contains + * the configuration information for the CRYP Initialization Vectors(IV). + * @retval None + */ +void CRYP_IVInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct) +{ + CRYP->IV0LR = CRYP_IVInitStruct->CRYP_IV0Left; + CRYP->IV0RR = CRYP_IVInitStruct->CRYP_IV0Right; + CRYP->IV1LR = CRYP_IVInitStruct->CRYP_IV1Left; + CRYP->IV1RR = CRYP_IVInitStruct->CRYP_IV1Right; +} + +/** + * @brief Fills each CRYP_IVInitStruct member with its default value. + * @param CRYP_IVInitStruct: pointer to a CRYP_IVInitTypeDef Initialization + * Vectors(IV) structure which will be initialized. + * @retval None + */ +void CRYP_IVStructInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct) +{ + CRYP_IVInitStruct->CRYP_IV0Left = 0; + CRYP_IVInitStruct->CRYP_IV0Right = 0; + CRYP_IVInitStruct->CRYP_IV1Left = 0; + CRYP_IVInitStruct->CRYP_IV1Right = 0; +} + +/** + * @brief Flushes the IN and OUT FIFOs (that is read and write pointers of the + * FIFOs are reset) + * @note The FIFOs must be flushed only when BUSY flag is reset. + * @param None + * @retval None + */ +void CRYP_FIFOFlush(void) +{ + /* Reset the read and write pointers of the FIFOs */ + CRYP->CR |= CRYP_CR_FFLUSH; +} + +/** + * @brief Enables or disables the CRYP peripheral. + * @param NewState: new state of the CRYP peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CRYP_Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Cryptographic processor */ + CRYP->CR |= CRYP_CR_CRYPEN; + } + else + { + /* Disable the Cryptographic processor */ + CRYP->CR &= ~CRYP_CR_CRYPEN; + } +} +/** + * @} + */ + +/** @defgroup CRYP_Group2 CRYP Data processing functions + * @brief CRYP Data processing functions + * +@verbatim + =============================================================================== + CRYP Data processing functions + =============================================================================== + This section provides functions allowing the encryption and decryption + operations: + - Enter data to be treated in the IN FIFO : using CRYP_DataIn() function. + - Get the data result from the OUT FIFO : using CRYP_DataOut() function. + +@endverbatim + * @{ + */ + +/** + * @brief Writes data in the Data Input register (DIN). + * @note After the DIN register has been read once or several times, + * the FIFO must be flushed (using CRYP_FIFOFlush() function). + * @param Data: data to write in Data Input register + * @retval None + */ +void CRYP_DataIn(uint32_t Data) +{ + CRYP->DR = Data; +} + +/** + * @brief Returns the last data entered into the output FIFO. + * @param None + * @retval Last data entered into the output FIFO. + */ +uint32_t CRYP_DataOut(void) +{ + return CRYP->DOUT; +} +/** + * @} + */ + +/** @defgroup CRYP_Group3 Context swapping functions + * @brief Context swapping functions + * +@verbatim + =============================================================================== + Context swapping functions + =============================================================================== + + This section provides functions allowing to save and store CRYP Context + + It is possible to interrupt an encryption/ decryption/ key generation process + to perform another processing with a higher priority, and to complete the + interrupted process later on, when the higher-priority task is complete. To do + so, the context of the interrupted task must be saved from the CRYP registers + to memory, and then be restored from memory to the CRYP registers. + + 1. To save the current context, use CRYP_SaveContext() function + 2. To restore the saved context, use CRYP_RestoreContext() function + + +@endverbatim + * @{ + */ + +/** + * @brief Saves the CRYP peripheral Context. + * @note This function stops DMA transfer before to save the context. After + * restoring the context, you have to enable the DMA again (if the DMA + * was previously used). + * @param CRYP_ContextSave: pointer to a CRYP_Context structure that contains + * the repository for current context. + * @param CRYP_KeyInitStruct: pointer to a CRYP_KeyInitTypeDef structure that + * contains the configuration information for the CRYP Keys. + * @retval None + */ +ErrorStatus CRYP_SaveContext(CRYP_Context* CRYP_ContextSave, + CRYP_KeyInitTypeDef* CRYP_KeyInitStruct) +{ + __IO uint32_t timeout = 0; + uint32_t ckeckmask = 0, bitstatus; + ErrorStatus status = ERROR; + + /* Stop DMA transfers on the IN FIFO by clearing the DIEN bit in the CRYP_DMACR */ + CRYP->DMACR &= ~(uint32_t)CRYP_DMACR_DIEN; + + /* Wait until both the IN and OUT FIFOs are empty + (IFEM=1 and OFNE=0 in the CRYP_SR register) and the + BUSY bit is cleared. */ + + if ((CRYP->CR & (uint32_t)(CRYP_CR_ALGOMODE_TDES_ECB | CRYP_CR_ALGOMODE_TDES_CBC)) != (uint32_t)0 )/* TDES */ + { + ckeckmask = CRYP_SR_IFEM | CRYP_SR_BUSY ; + } + else /* AES or DES */ + { + ckeckmask = CRYP_SR_IFEM | CRYP_SR_BUSY | CRYP_SR_OFNE; + } + + do + { + bitstatus = CRYP->SR & ckeckmask; + timeout++; + } + while ((timeout != MAX_TIMEOUT) && (bitstatus != CRYP_SR_IFEM)); + + if ((CRYP->SR & ckeckmask) != CRYP_SR_IFEM) + { + status = ERROR; + } + else + { + /* Stop DMA transfers on the OUT FIFO by + - writing the DOEN bit to 0 in the CRYP_DMACR register + - and clear the CRYPEN bit. */ + + CRYP->DMACR &= ~(uint32_t)CRYP_DMACR_DOEN; + CRYP->CR &= ~(uint32_t)CRYP_CR_CRYPEN; + + /* Save the current configuration (bits [9:2] in the CRYP_CR register) */ + CRYP_ContextSave->CR_bits9to2 = CRYP->CR & (CRYP_CR_KEYSIZE | + CRYP_CR_DATATYPE | + CRYP_CR_ALGOMODE | + CRYP_CR_ALGODIR); + + /* and, if not in ECB mode, the initialization vectors. */ + CRYP_ContextSave->CRYP_IV0LR = CRYP->IV0LR; + CRYP_ContextSave->CRYP_IV0RR = CRYP->IV0RR; + CRYP_ContextSave->CRYP_IV1LR = CRYP->IV1LR; + CRYP_ContextSave->CRYP_IV1RR = CRYP->IV1RR; + + /* save The key value */ + CRYP_ContextSave->CRYP_K0LR = CRYP_KeyInitStruct->CRYP_Key0Left; + CRYP_ContextSave->CRYP_K0RR = CRYP_KeyInitStruct->CRYP_Key0Right; + CRYP_ContextSave->CRYP_K1LR = CRYP_KeyInitStruct->CRYP_Key1Left; + CRYP_ContextSave->CRYP_K1RR = CRYP_KeyInitStruct->CRYP_Key1Right; + CRYP_ContextSave->CRYP_K2LR = CRYP_KeyInitStruct->CRYP_Key2Left; + CRYP_ContextSave->CRYP_K2RR = CRYP_KeyInitStruct->CRYP_Key2Right; + CRYP_ContextSave->CRYP_K3LR = CRYP_KeyInitStruct->CRYP_Key3Left; + CRYP_ContextSave->CRYP_K3RR = CRYP_KeyInitStruct->CRYP_Key3Right; + + /* When needed, save the DMA status (pointers for IN and OUT messages, + number of remaining bytes, etc.) */ + + status = SUCCESS; + } + + return status; +} + +/** + * @brief Restores the CRYP peripheral Context. + * @note Since teh DMA transfer is stopped in CRYP_SaveContext() function, + * after restoring the context, you have to enable the DMA again (if the + * DMA was previously used). + * @param CRYP_ContextRestore: pointer to a CRYP_Context structure that contains + * the repository for saved context. + * @note The data that were saved during context saving must be rewrited into + * the IN FIFO. + * @retval None + */ +void CRYP_RestoreContext(CRYP_Context* CRYP_ContextRestore) +{ + + /* Configure the processor with the saved configuration */ + CRYP->CR = CRYP_ContextRestore->CR_bits9to2; + + /* restore The key value */ + CRYP->K0LR = CRYP_ContextRestore->CRYP_K0LR; + CRYP->K0RR = CRYP_ContextRestore->CRYP_K0RR; + CRYP->K1LR = CRYP_ContextRestore->CRYP_K1LR; + CRYP->K1RR = CRYP_ContextRestore->CRYP_K1RR; + CRYP->K2LR = CRYP_ContextRestore->CRYP_K2LR; + CRYP->K2RR = CRYP_ContextRestore->CRYP_K2RR; + CRYP->K3LR = CRYP_ContextRestore->CRYP_K3LR; + CRYP->K3RR = CRYP_ContextRestore->CRYP_K3RR; + + /* and the initialization vectors. */ + CRYP->IV0LR = CRYP_ContextRestore->CRYP_IV0LR; + CRYP->IV0RR = CRYP_ContextRestore->CRYP_IV0RR; + CRYP->IV1LR = CRYP_ContextRestore->CRYP_IV1LR; + CRYP->IV1RR = CRYP_ContextRestore->CRYP_IV1RR; + + /* Enable the cryptographic processor */ + CRYP->CR |= CRYP_CR_CRYPEN; +} +/** + * @} + */ + +/** @defgroup CRYP_Group4 CRYP's DMA interface Configuration function + * @brief CRYP's DMA interface Configuration function + * +@verbatim + =============================================================================== + CRYP's DMA interface Configuration function + =============================================================================== + + This section provides functions allowing to configure the DMA interface for + CRYP data input and output transfer. + + When the DMA mode is enabled (using the CRYP_DMACmd() function), data can be + transferred: + - From memory to the CRYP IN FIFO using the DMA peripheral by enabling + the CRYP_DMAReq_DataIN request. + - From the CRYP OUT FIFO to the memory using the DMA peripheral by enabling + the CRYP_DMAReq_DataOUT request. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the CRYP DMA interface. + * @param CRYP_DMAReq: specifies the CRYP DMA transfer request to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg CRYP_DMAReq_DataOUT: DMA for outgoing(Tx) data transfer + * @arg CRYP_DMAReq_DataIN: DMA for incoming(Rx) data transfer + * @param NewState: new state of the selected CRYP DMA transfer request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CRYP_DMACmd(uint8_t CRYP_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CRYP_DMAREQ(CRYP_DMAReq)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected CRYP DMA request */ + CRYP->DMACR |= CRYP_DMAReq; + } + else + { + /* Disable the selected CRYP DMA request */ + CRYP->DMACR &= (uint8_t)~CRYP_DMAReq; + } +} +/** + * @} + */ + +/** @defgroup CRYP_Group5 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + + This section provides functions allowing to configure the CRYP Interrupts and + to get the status and Interrupts pending bits. + + The CRYP provides 2 Interrupts sources and 7 Flags: + + Flags : + ------- + + 1. CRYP_FLAG_IFEM : Set when Input FIFO is empty. + This Flag is cleared only by hardware. + + 2. CRYP_FLAG_IFNF : Set when Input FIFO is not full. + This Flag is cleared only by hardware. + + + 3. CRYP_FLAG_INRIS : Set when Input FIFO Raw interrupt is pending + it gives the raw interrupt state prior to masking + of the input FIFO service interrupt. + This Flag is cleared only by hardware. + + 4. CRYP_FLAG_OFNE : Set when Output FIFO not empty. + This Flag is cleared only by hardware. + + 5. CRYP_FLAG_OFFU : Set when Output FIFO is full. + This Flag is cleared only by hardware. + + 6. CRYP_FLAG_OUTRIS : Set when Output FIFO Raw interrupt is pending + it gives the raw interrupt state prior to masking + of the output FIFO service interrupt. + This Flag is cleared only by hardware. + + 7. CRYP_FLAG_BUSY : Set when the CRYP core is currently processing a + block of data or a key preparation (for AES + decryption). + This Flag is cleared only by hardware. + To clear it, the CRYP core must be disabled and the + last processing has completed. + + Interrupts : + ------------ + + 1. CRYP_IT_INI : The input FIFO service interrupt is asserted when there + are less than 4 words in the input FIFO. + This interrupt is associated to CRYP_FLAG_INRIS flag. + + @note This interrupt is cleared by performing write operations + to the input FIFO until it holds 4 or more words. The + input FIFO service interrupt INMIS is enabled with the + CRYP enable bit. Consequently, when CRYP is disabled, the + INMIS signal is low even if the input FIFO is empty. + + + + 2. CRYP_IT_OUTI : The output FIFO service interrupt is asserted when there + is one or more (32-bit word) data items in the output FIFO. + This interrupt is associated to CRYP_FLAG_OUTRIS flag. + + @note This interrupt is cleared by reading data from the output + FIFO until there is no valid (32-bit) word left (that is, + the interrupt follows the state of the OFNE (output FIFO + not empty) flag). + + + Managing the CRYP controller events : + ------------------------------------ + The user should identify which mode will be used in his application to manage + the CRYP controller events: Polling mode or Interrupt mode. + + 1. In the Polling Mode it is advised to use the following functions: + - CRYP_GetFlagStatus() : to check if flags events occur. + + @note The CRYPT flags do not need to be cleared since they are cleared as + soon as the associated event are reset. + + + 2. In the Interrupt Mode it is advised to use the following functions: + - CRYP_ITConfig() : to enable or disable the interrupt source. + - CRYP_GetITStatus() : to check if Interrupt occurs. + + @note The CRYPT interrupts have no pending bits, the interrupt is cleared as + soon as the associated event is reset. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified CRYP interrupts. + * @param CRYP_IT: specifies the CRYP interrupt source to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg CRYP_IT_INI: Input FIFO interrupt + * @arg CRYP_IT_OUTI: Output FIFO interrupt + * @param NewState: new state of the specified CRYP interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CRYP_ITConfig(uint8_t CRYP_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CRYP_CONFIG_IT(CRYP_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected CRYP interrupt */ + CRYP->IMSCR |= CRYP_IT; + } + else + { + /* Disable the selected CRYP interrupt */ + CRYP->IMSCR &= (uint8_t)~CRYP_IT; + } +} + +/** + * @brief Checks whether the specified CRYP interrupt has occurred or not. + * @note This function checks the status of the masked interrupt (i.e the + * interrupt should be previously enabled). + * @param CRYP_IT: specifies the CRYP (masked) interrupt source to check. + * This parameter can be one of the following values: + * @arg CRYP_IT_INI: Input FIFO interrupt + * @arg CRYP_IT_OUTI: Output FIFO interrupt + * @retval The new state of CRYP_IT (SET or RESET). + */ +ITStatus CRYP_GetITStatus(uint8_t CRYP_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_CRYP_GET_IT(CRYP_IT)); + + /* Check the status of the specified CRYP interrupt */ + if ((CRYP->MISR & CRYP_IT) != (uint8_t)RESET) + { + /* CRYP_IT is set */ + bitstatus = SET; + } + else + { + /* CRYP_IT is reset */ + bitstatus = RESET; + } + /* Return the CRYP_IT status */ + return bitstatus; +} + +/** + * @brief Checks whether the specified CRYP flag is set or not. + * @param CRYP_FLAG: specifies the CRYP flag to check. + * This parameter can be one of the following values: + * @arg CRYP_FLAG_IFEM: Input FIFO Empty flag. + * @arg CRYP_FLAG_IFNF: Input FIFO Not Full flag. + * @arg CRYP_FLAG_OFNE: Output FIFO Not Empty flag. + * @arg CRYP_FLAG_OFFU: Output FIFO Full flag. + * @arg CRYP_FLAG_BUSY: Busy flag. + * @arg CRYP_FLAG_OUTRIS: Output FIFO raw interrupt flag. + * @arg CRYP_FLAG_INRIS: Input FIFO raw interrupt flag. + * @retval The new state of CRYP_FLAG (SET or RESET). + */ +FlagStatus CRYP_GetFlagStatus(uint8_t CRYP_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tempreg = 0; + + /* Check the parameters */ + assert_param(IS_CRYP_GET_FLAG(CRYP_FLAG)); + + /* check if the FLAG is in RISR register */ + if ((CRYP_FLAG & FLAG_MASK) != 0x00) + { + tempreg = CRYP->RISR; + } + else /* The FLAG is in SR register */ + { + tempreg = CRYP->SR; + } + + + /* Check the status of the specified CRYP flag */ + if ((tempreg & CRYP_FLAG ) != (uint8_t)RESET) + { + /* CRYP_FLAG is set */ + bitstatus = SET; + } + else + { + /* CRYP_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the CRYP_FLAG status */ + return bitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp.h new file mode 100644 index 00000000000..2e43b3200dc --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp.h @@ -0,0 +1,338 @@ +/** + ****************************************************************************** + * @file stm32f4xx_cryp.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the Cryptographic + * processor(CRYP) firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_CRYP_H +#define __STM32F4xx_CRYP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CRYP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief CRYP Init structure definition + */ +typedef struct +{ + uint16_t CRYP_AlgoDir; /*!< Encrypt or Decrypt. This parameter can be a + value of @ref CRYP_Algorithm_Direction */ + uint16_t CRYP_AlgoMode; /*!< TDES-ECB, TDES-CBC, DES-ECB, DES-CBC, AES-ECB, + AES-CBC, AES-CTR, AES-Key. This parameter can be + a value of @ref CRYP_Algorithm_Mode */ + uint16_t CRYP_DataType; /*!< 32-bit data, 16-bit data, bit data or bit-string. + This parameter can be a value of @ref CRYP_Data_Type */ + uint16_t CRYP_KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit + key length. This parameter can be a value of + @ref CRYP_Key_Size_for_AES_only */ +}CRYP_InitTypeDef; + +/** + * @brief CRYP Key(s) structure definition + */ +typedef struct +{ + uint32_t CRYP_Key0Left; /*!< Key 0 Left */ + uint32_t CRYP_Key0Right; /*!< Key 0 Right */ + uint32_t CRYP_Key1Left; /*!< Key 1 left */ + uint32_t CRYP_Key1Right; /*!< Key 1 Right */ + uint32_t CRYP_Key2Left; /*!< Key 2 left */ + uint32_t CRYP_Key2Right; /*!< Key 2 Right */ + uint32_t CRYP_Key3Left; /*!< Key 3 left */ + uint32_t CRYP_Key3Right; /*!< Key 3 Right */ +}CRYP_KeyInitTypeDef; +/** + * @brief CRYP Initialization Vectors (IV) structure definition + */ +typedef struct +{ + uint32_t CRYP_IV0Left; /*!< Init Vector 0 Left */ + uint32_t CRYP_IV0Right; /*!< Init Vector 0 Right */ + uint32_t CRYP_IV1Left; /*!< Init Vector 1 left */ + uint32_t CRYP_IV1Right; /*!< Init Vector 1 Right */ +}CRYP_IVInitTypeDef; + +/** + * @brief CRYP context swapping structure definition + */ +typedef struct +{ + /*!< Configuration */ + uint32_t CR_bits9to2; + /*!< KEY */ + uint32_t CRYP_IV0LR; + uint32_t CRYP_IV0RR; + uint32_t CRYP_IV1LR; + uint32_t CRYP_IV1RR; + /*!< IV */ + uint32_t CRYP_K0LR; + uint32_t CRYP_K0RR; + uint32_t CRYP_K1LR; + uint32_t CRYP_K1RR; + uint32_t CRYP_K2LR; + uint32_t CRYP_K2RR; + uint32_t CRYP_K3LR; + uint32_t CRYP_K3RR; +}CRYP_Context; + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CRYP_Exported_Constants + * @{ + */ + +/** @defgroup CRYP_Algorithm_Direction + * @{ + */ +#define CRYP_AlgoDir_Encrypt ((uint16_t)0x0000) +#define CRYP_AlgoDir_Decrypt ((uint16_t)0x0004) +#define IS_CRYP_ALGODIR(ALGODIR) (((ALGODIR) == CRYP_AlgoDir_Encrypt) || \ + ((ALGODIR) == CRYP_AlgoDir_Decrypt)) + +/** + * @} + */ + +/** @defgroup CRYP_Algorithm_Mode + * @{ + */ + +/*!< TDES Modes */ +#define CRYP_AlgoMode_TDES_ECB ((uint16_t)0x0000) +#define CRYP_AlgoMode_TDES_CBC ((uint16_t)0x0008) + +/*!< DES Modes */ +#define CRYP_AlgoMode_DES_ECB ((uint16_t)0x0010) +#define CRYP_AlgoMode_DES_CBC ((uint16_t)0x0018) + +/*!< AES Modes */ +#define CRYP_AlgoMode_AES_ECB ((uint16_t)0x0020) +#define CRYP_AlgoMode_AES_CBC ((uint16_t)0x0028) +#define CRYP_AlgoMode_AES_CTR ((uint16_t)0x0030) +#define CRYP_AlgoMode_AES_Key ((uint16_t)0x0038) + +#define IS_CRYP_ALGOMODE(ALGOMODE) (((ALGOMODE) == CRYP_AlgoMode_TDES_ECB) || \ + ((ALGOMODE) == CRYP_AlgoMode_TDES_CBC)|| \ + ((ALGOMODE) == CRYP_AlgoMode_DES_ECB)|| \ + ((ALGOMODE) == CRYP_AlgoMode_DES_CBC) || \ + ((ALGOMODE) == CRYP_AlgoMode_AES_ECB) || \ + ((ALGOMODE) == CRYP_AlgoMode_AES_CBC) || \ + ((ALGOMODE) == CRYP_AlgoMode_AES_CTR) || \ + ((ALGOMODE) == CRYP_AlgoMode_AES_Key)) +/** + * @} + */ + +/** @defgroup CRYP_Data_Type + * @{ + */ +#define CRYP_DataType_32b ((uint16_t)0x0000) +#define CRYP_DataType_16b ((uint16_t)0x0040) +#define CRYP_DataType_8b ((uint16_t)0x0080) +#define CRYP_DataType_1b ((uint16_t)0x00C0) +#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DataType_32b) || \ + ((DATATYPE) == CRYP_DataType_16b)|| \ + ((DATATYPE) == CRYP_DataType_8b)|| \ + ((DATATYPE) == CRYP_DataType_1b)) +/** + * @} + */ + +/** @defgroup CRYP_Key_Size_for_AES_only + * @{ + */ +#define CRYP_KeySize_128b ((uint16_t)0x0000) +#define CRYP_KeySize_192b ((uint16_t)0x0100) +#define CRYP_KeySize_256b ((uint16_t)0x0200) +#define IS_CRYP_KEYSIZE(KEYSIZE) (((KEYSIZE) == CRYP_KeySize_128b)|| \ + ((KEYSIZE) == CRYP_KeySize_192b)|| \ + ((KEYSIZE) == CRYP_KeySize_256b)) +/** + * @} + */ + +/** @defgroup CRYP_flags_definition + * @{ + */ +#define CRYP_FLAG_BUSY ((uint8_t)0x10) /*!< The CRYP core is currently + processing a block of data + or a key preparation (for + AES decryption). */ +#define CRYP_FLAG_IFEM ((uint8_t)0x01) /*!< Input Fifo Empty */ +#define CRYP_FLAG_IFNF ((uint8_t)0x02) /*!< Input Fifo is Not Full */ +#define CRYP_FLAG_INRIS ((uint8_t)0x22) /*!< Raw interrupt pending */ +#define CRYP_FLAG_OFNE ((uint8_t)0x04) /*!< Input Fifo service raw + interrupt status */ +#define CRYP_FLAG_OFFU ((uint8_t)0x08) /*!< Output Fifo is Full */ +#define CRYP_FLAG_OUTRIS ((uint8_t)0x21) /*!< Output Fifo service raw + interrupt status */ + +#define IS_CRYP_GET_FLAG(FLAG) (((FLAG) == CRYP_FLAG_IFEM) || \ + ((FLAG) == CRYP_FLAG_IFNF) || \ + ((FLAG) == CRYP_FLAG_OFNE) || \ + ((FLAG) == CRYP_FLAG_OFFU) || \ + ((FLAG) == CRYP_FLAG_BUSY) || \ + ((FLAG) == CRYP_FLAG_OUTRIS)|| \ + ((FLAG) == CRYP_FLAG_INRIS)) +/** + * @} + */ + +/** @defgroup CRYP_interrupts_definition + * @{ + */ +#define CRYP_IT_INI ((uint8_t)0x01) /*!< IN Fifo Interrupt */ +#define CRYP_IT_OUTI ((uint8_t)0x02) /*!< OUT Fifo Interrupt */ +#define IS_CRYP_CONFIG_IT(IT) ((((IT) & (uint8_t)0xFC) == 0x00) && ((IT) != 0x00)) +#define IS_CRYP_GET_IT(IT) (((IT) == CRYP_IT_INI) || ((IT) == CRYP_IT_OUTI)) + +/** + * @} + */ + +/** @defgroup CRYP_Encryption_Decryption_modes_definition + * @{ + */ +#define MODE_ENCRYPT ((uint8_t)0x01) +#define MODE_DECRYPT ((uint8_t)0x00) + +/** + * @} + */ + +/** @defgroup CRYP_DMA_transfer_requests + * @{ + */ +#define CRYP_DMAReq_DataIN ((uint8_t)0x01) +#define CRYP_DMAReq_DataOUT ((uint8_t)0x02) +#define IS_CRYP_DMAREQ(DMAREQ) ((((DMAREQ) & (uint8_t)0xFC) == 0x00) && ((DMAREQ) != 0x00)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the CRYP configuration to the default reset state ****/ +void CRYP_DeInit(void); + +/* CRYP Initialization and Configuration functions ****************************/ +void CRYP_Init(CRYP_InitTypeDef* CRYP_InitStruct); +void CRYP_StructInit(CRYP_InitTypeDef* CRYP_InitStruct); +void CRYP_KeyInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct); +void CRYP_KeyStructInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct); +void CRYP_IVInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct); +void CRYP_IVStructInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct); +void CRYP_Cmd(FunctionalState NewState); + +/* CRYP Data processing functions *********************************************/ +void CRYP_DataIn(uint32_t Data); +uint32_t CRYP_DataOut(void); +void CRYP_FIFOFlush(void); + +/* CRYP Context swapping functions ********************************************/ +ErrorStatus CRYP_SaveContext(CRYP_Context* CRYP_ContextSave, + CRYP_KeyInitTypeDef* CRYP_KeyInitStruct); +void CRYP_RestoreContext(CRYP_Context* CRYP_ContextRestore); + +/* CRYP's DMA interface function **********************************************/ +void CRYP_DMACmd(uint8_t CRYP_DMAReq, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void CRYP_ITConfig(uint8_t CRYP_IT, FunctionalState NewState); +ITStatus CRYP_GetITStatus(uint8_t CRYP_IT); +FlagStatus CRYP_GetFlagStatus(uint8_t CRYP_FLAG); + +/* High Level AES functions **************************************************/ +ErrorStatus CRYP_AES_ECB(uint8_t Mode, + uint8_t *Key, uint16_t Keysize, + uint8_t *Input, uint32_t Ilength, + uint8_t *Output); + +ErrorStatus CRYP_AES_CBC(uint8_t Mode, + uint8_t InitVectors[16], + uint8_t *Key, uint16_t Keysize, + uint8_t *Input, uint32_t Ilength, + uint8_t *Output); + +ErrorStatus CRYP_AES_CTR(uint8_t Mode, + uint8_t InitVectors[16], + uint8_t *Key, uint16_t Keysize, + uint8_t *Input, uint32_t Ilength, + uint8_t *Output); + +/* High Level TDES functions **************************************************/ +ErrorStatus CRYP_TDES_ECB(uint8_t Mode, + uint8_t Key[24], + uint8_t *Input, uint32_t Ilength, + uint8_t *Output); + +ErrorStatus CRYP_TDES_CBC(uint8_t Mode, + uint8_t Key[24], + uint8_t InitVectors[8], + uint8_t *Input, uint32_t Ilength, + uint8_t *Output); + +/* High Level DES functions **************************************************/ +ErrorStatus CRYP_DES_ECB(uint8_t Mode, + uint8_t Key[8], + uint8_t *Input, uint32_t Ilength, + uint8_t *Output); + +ErrorStatus CRYP_DES_CBC(uint8_t Mode, + uint8_t Key[8], + uint8_t InitVectors[8], + uint8_t *Input,uint32_t Ilength, + uint8_t *Output); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_CRYP_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp_aes.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp_aes.c new file mode 100644 index 00000000000..886307f977d --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_cryp_aes.c @@ -0,0 +1,638 @@ +/** + ****************************************************************************** + * @file stm32f4xx_cryp_aes.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides high level functions to encrypt and decrypt an + * input message using AES in ECB/CBC/CTR modes. + * It uses the stm32f4xx_cryp.c/.h drivers to access the STM32F4xx CRYP + * peripheral. + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. Enable The CRYP controller clock using + * RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_CRYP, ENABLE); function. + * + * 2. Encrypt and decrypt using AES in ECB Mode using CRYP_AES_ECB() + * function. + * + * 3. Encrypt and decrypt using AES in CBC Mode using CRYP_AES_CBC() + * function. + * + * 4. Encrypt and decrypt using AES in CTR Mode using CRYP_AES_CTR() + * function. + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_cryp.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRYP + * @brief CRYP driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define AESBUSY_TIMEOUT ((uint32_t) 0x00010000) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup CRYP_Private_Functions + * @{ + */ + +/** @defgroup CRYP_Group6 High Level AES functions + * @brief High Level AES functions + * +@verbatim + =============================================================================== + High Level AES functions + =============================================================================== + + +@endverbatim + * @{ + */ + +/** + * @brief Encrypt and decrypt using AES in ECB Mode + * @param Mode: encryption or decryption Mode. + * This parameter can be one of the following values: + * @arg MODE_ENCRYPT: Encryption + * @arg MODE_DECRYPT: Decryption + * @param Key: Key used for AES algorithm. + * @param Keysize: length of the Key, must be a 128, 192 or 256. + * @param Input: pointer to the Input buffer. + * @param Ilength: length of the Input buffer, must be a multiple of 16. + * @param Output: pointer to the returned buffer. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Operation done + * - ERROR: Operation failed + */ +ErrorStatus CRYP_AES_ECB(uint8_t Mode, uint8_t* Key, uint16_t Keysize, + uint8_t* Input, uint32_t Ilength, uint8_t* Output) +{ + CRYP_InitTypeDef AES_CRYP_InitStructure; + CRYP_KeyInitTypeDef AES_CRYP_KeyInitStructure; + __IO uint32_t counter = 0; + uint32_t busystatus = 0; + ErrorStatus status = SUCCESS; + uint32_t keyaddr = (uint32_t)Key; + uint32_t inputaddr = (uint32_t)Input; + uint32_t outputaddr = (uint32_t)Output; + uint32_t i = 0; + + /* Crypto structures initialisation*/ + CRYP_KeyStructInit(&AES_CRYP_KeyInitStructure); + + switch(Keysize) + { + case 128: + AES_CRYP_InitStructure.CRYP_KeySize = CRYP_KeySize_128b; + AES_CRYP_KeyInitStructure.CRYP_Key2Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key2Right= __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key3Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key3Right= __REV(*(uint32_t*)(keyaddr)); + break; + case 192: + AES_CRYP_InitStructure.CRYP_KeySize = CRYP_KeySize_192b; + AES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key2Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key2Right= __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key3Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key3Right= __REV(*(uint32_t*)(keyaddr)); + break; + case 256: + AES_CRYP_InitStructure.CRYP_KeySize = CRYP_KeySize_256b; + AES_CRYP_KeyInitStructure.CRYP_Key0Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key0Right= __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key2Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key2Right= __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key3Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + AES_CRYP_KeyInitStructure.CRYP_Key3Right= __REV(*(uint32_t*)(keyaddr)); + break; + default: + break; + } + + /*------------------ AES Decryption ------------------*/ + if(Mode == MODE_DECRYPT) /* AES decryption */ + { + /* Flush IN/OUT FIFOs */ + CRYP_FIFOFlush(); + + /* Crypto Init for Key preparation for decryption process */ + AES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt; + AES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_AES_Key; + AES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_32b; + CRYP_Init(&AES_CRYP_InitStructure); + + /* Key Initialisation */ + CRYP_KeyInit(&AES_CRYP_KeyInitStructure); + + /* Enable Crypto processor */ + CRYP_Cmd(ENABLE); + + /* wait until the Busy flag is RESET */ + do + { + busystatus = CRYP_GetFlagStatus(CRYP_FLAG_BUSY); + counter++; + }while ((counter != AESBUSY_TIMEOUT) && (busystatus != RESET)); + + if (busystatus != RESET) + { + status = ERROR; + } + else + { + /* Crypto Init for decryption process */ + AES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt; + } + } + /*------------------ AES Encryption ------------------*/ + else /* AES encryption */ + { + + CRYP_KeyInit(&AES_CRYP_KeyInitStructure); + + /* Crypto Init for Encryption process */ + AES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt; + } + + AES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_AES_ECB; + AES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b; + CRYP_Init(&AES_CRYP_InitStructure); + + /* Flush IN/OUT FIFOs */ + CRYP_FIFOFlush(); + + /* Enable Crypto processor */ + CRYP_Cmd(ENABLE); + + for(i=0; ((i
© COPYRIGHT 2011 STMicroelectronics
+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_cryp.h" + + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRYP + * @brief CRYP driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define DESBUSY_TIMEOUT ((uint32_t) 0x00010000) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + +/** @defgroup CRYP_Private_Functions + * @{ + */ + +/** @defgroup CRYP_Group8 High Level DES functions + * @brief High Level DES functions + * +@verbatim + =============================================================================== + High Level DES functions + =============================================================================== +@endverbatim + * @{ + */ + +/** + * @brief Encrypt and decrypt using DES in ECB Mode + * @param Mode: encryption or decryption Mode. + * This parameter can be one of the following values: + * @arg MODE_ENCRYPT: Encryption + * @arg MODE_DECRYPT: Decryption + * @param Key: Key used for DES algorithm. + * @param Ilength: length of the Input buffer, must be a multiple of 8. + * @param Input: pointer to the Input buffer. + * @param Output: pointer to the returned buffer. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Operation done + * - ERROR: Operation failed + */ +ErrorStatus CRYP_DES_ECB(uint8_t Mode, uint8_t Key[8], uint8_t *Input, + uint32_t Ilength, uint8_t *Output) +{ + CRYP_InitTypeDef DES_CRYP_InitStructure; + CRYP_KeyInitTypeDef DES_CRYP_KeyInitStructure; + __IO uint32_t counter = 0; + uint32_t busystatus = 0; + ErrorStatus status = SUCCESS; + uint32_t keyaddr = (uint32_t)Key; + uint32_t inputaddr = (uint32_t)Input; + uint32_t outputaddr = (uint32_t)Output; + uint32_t i = 0; + + /* Crypto structures initialisation*/ + CRYP_KeyStructInit(&DES_CRYP_KeyInitStructure); + + /* Crypto Init for Encryption process */ + if( Mode == MODE_ENCRYPT ) /* DES encryption */ + { + DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt; + } + else/* if( Mode == MODE_DECRYPT )*/ /* DES decryption */ + { + DES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt; + } + + DES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_DES_ECB; + DES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b; + CRYP_Init(&DES_CRYP_InitStructure); + + /* Key Initialisation */ + DES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + DES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr)); + CRYP_KeyInit(& DES_CRYP_KeyInitStructure); + + /* Flush IN/OUT FIFO */ + CRYP_FIFOFlush(); + + /* Enable Crypto processor */ + CRYP_Cmd(ENABLE); + + for(i=0; ((i
© COPYRIGHT 2011 STMicroelectronics
+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_cryp.h" + + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRYP + * @brief CRYP driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define TDESBUSY_TIMEOUT ((uint32_t) 0x00010000) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + +/** @defgroup CRYP_Private_Functions + * @{ + */ + +/** @defgroup CRYP_Group7 High Level TDES functions + * @brief High Level TDES functions + * +@verbatim + =============================================================================== + High Level TDES functions + =============================================================================== + + +@endverbatim + * @{ + */ + +/** + * @brief Encrypt and decrypt using TDES in ECB Mode + * @param Mode: encryption or decryption Mode. + * This parameter can be one of the following values: + * @arg MODE_ENCRYPT: Encryption + * @arg MODE_DECRYPT: Decryption + * @param Key: Key used for TDES algorithm. + * @param Ilength: length of the Input buffer, must be a multiple of 8. + * @param Input: pointer to the Input buffer. + * @param Output: pointer to the returned buffer. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Operation done + * - ERROR: Operation failed + */ +ErrorStatus CRYP_TDES_ECB(uint8_t Mode, uint8_t Key[24], uint8_t *Input, + uint32_t Ilength, uint8_t *Output) +{ + CRYP_InitTypeDef TDES_CRYP_InitStructure; + CRYP_KeyInitTypeDef TDES_CRYP_KeyInitStructure; + __IO uint32_t counter = 0; + uint32_t busystatus = 0; + ErrorStatus status = SUCCESS; + uint32_t keyaddr = (uint32_t)Key; + uint32_t inputaddr = (uint32_t)Input; + uint32_t outputaddr = (uint32_t)Output; + uint32_t i = 0; + + /* Crypto structures initialisation*/ + CRYP_KeyStructInit(&TDES_CRYP_KeyInitStructure); + + /* Crypto Init for Encryption process */ + if(Mode == MODE_ENCRYPT) /* TDES encryption */ + { + TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Encrypt; + } + else /*if(Mode == MODE_DECRYPT)*/ /* TDES decryption */ + { + TDES_CRYP_InitStructure.CRYP_AlgoDir = CRYP_AlgoDir_Decrypt; + } + + TDES_CRYP_InitStructure.CRYP_AlgoMode = CRYP_AlgoMode_TDES_ECB; + TDES_CRYP_InitStructure.CRYP_DataType = CRYP_DataType_8b; + CRYP_Init(&TDES_CRYP_InitStructure); + + /* Key Initialisation */ + TDES_CRYP_KeyInitStructure.CRYP_Key1Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + TDES_CRYP_KeyInitStructure.CRYP_Key1Right= __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + TDES_CRYP_KeyInitStructure.CRYP_Key2Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + TDES_CRYP_KeyInitStructure.CRYP_Key2Right= __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + TDES_CRYP_KeyInitStructure.CRYP_Key3Left = __REV(*(uint32_t*)(keyaddr)); + keyaddr+=4; + TDES_CRYP_KeyInitStructure.CRYP_Key3Right= __REV(*(uint32_t*)(keyaddr)); + CRYP_KeyInit(& TDES_CRYP_KeyInitStructure); + + /* Flush IN/OUT FIFO */ + CRYP_FIFOFlush(); + + /* Enable Crypto processor */ + CRYP_Cmd(ENABLE); + + for(i=0; ((i
© COPYRIGHT 2011 STMicroelectronics
+ ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_dac.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup DAC + * @brief DAC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* CR register Mask */ +#define CR_CLEAR_MASK ((uint32_t)0x00000FFE) + +/* DAC Dual Channels SWTRIG masks */ +#define DUAL_SWTRIG_SET ((uint32_t)0x00000003) +#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC) + +/* DHR registers offsets */ +#define DHR12R1_OFFSET ((uint32_t)0x00000008) +#define DHR12R2_OFFSET ((uint32_t)0x00000014) +#define DHR12RD_OFFSET ((uint32_t)0x00000020) + +/* DOR register offset */ +#define DOR_OFFSET ((uint32_t)0x0000002C) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup DAC_Private_Functions + * @{ + */ + +/** @defgroup DAC_Group1 DAC channels configuration + * @brief DAC channels configuration: trigger, output buffer, data format + * +@verbatim + =============================================================================== + DAC channels configuration: trigger, output buffer, data format + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the DAC peripheral registers to their default reset values. + * @param None + * @retval None + */ +void DAC_DeInit(void) +{ + /* Enable DAC reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE); + /* Release DAC from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE); +} + +/** + * @brief Initializes the DAC peripheral according to the specified parameters + * in the DAC_InitStruct. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that contains + * the configuration information for the specified DAC channel. + * @retval None + */ +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger)); + assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer)); + +/*---------------------------- DAC CR Configuration --------------------------*/ + /* Get the DAC CR value */ + tmpreg1 = DAC->CR; + /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel); + /* Configure for the selected DAC channel: buffer output, trigger, + wave generation, mask/amplitude for wave generation */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + /* Set WAVEx bits according to DAC_WaveGeneration value */ + /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ + /* Set BOFFx bit according to DAC_OutputBuffer value */ + tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration | + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | \ + DAC_InitStruct->DAC_OutputBuffer); + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << DAC_Channel; + /* Write to DAC CR */ + DAC->CR = tmpreg1; +} + +/** + * @brief Fills each DAC_InitStruct member with its default value. + * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct) +{ +/*--------------- Reset DAC init structure parameters values -----------------*/ + /* Initialize the DAC_Trigger member */ + DAC_InitStruct->DAC_Trigger = DAC_Trigger_None; + /* Initialize the DAC_WaveGeneration member */ + DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None; + /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */ + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0; + /* Initialize the DAC_OutputBuffer member */ + DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable; +} + +/** + * @brief Enables or disables the specified DAC channel. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the DAC channel. + * This parameter can be: ENABLE or DISABLE. + * @note When the DAC channel is enabled the trigger source can no more be modified. + * @retval None + */ +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DAC channel */ + DAC->CR |= (DAC_CR_EN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel */ + DAC->CR &= (~(DAC_CR_EN1 << DAC_Channel)); + } +} + +/** + * @brief Enables or disables the selected DAC channel software trigger. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the selected DAC channel software trigger. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable software trigger for the selected DAC channel */ + DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4); + } + else + { + /* Disable software trigger for the selected DAC channel */ + DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4)); + } +} + +/** + * @brief Enables or disables simultaneously the two DAC channels software triggers. + * @param NewState: new state of the DAC channels software triggers. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable software trigger for both DAC channels */ + DAC->SWTRIGR |= DUAL_SWTRIG_SET; + } + else + { + /* Disable software trigger for both DAC channels */ + DAC->SWTRIGR &= DUAL_SWTRIG_RESET; + } +} + +/** + * @brief Enables or disables the selected DAC channel wave generation. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_Wave: specifies the wave type to enable or disable. + * This parameter can be one of the following values: + * @arg DAC_Wave_Noise: noise wave generation + * @arg DAC_Wave_Triangle: triangle wave generation + * @param NewState: new state of the selected DAC channel wave generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_WAVE(DAC_Wave)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected wave generation for the selected DAC channel */ + DAC->CR |= DAC_Wave << DAC_Channel; + } + else + { + /* Disable the selected wave generation for the selected DAC channel */ + DAC->CR &= ~(DAC_Wave << DAC_Channel); + } +} + +/** + * @brief Set the specified data holding register value for DAC channel1. + * @param DAC_Align: Specifies the data alignment for DAC channel1. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data: Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R1_OFFSET + DAC_Align; + + /* Set the DAC channel1 selected data holding register */ + *(__IO uint32_t *) tmp = Data; +} + +/** + * @brief Set the specified data holding register value for DAC channel2. + * @param DAC_Align: Specifies the data alignment for DAC channel2. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data: Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R2_OFFSET + DAC_Align; + + /* Set the DAC channel2 selected data holding register */ + *(__IO uint32_t *)tmp = Data; +} + +/** + * @brief Set the specified data holding register value for dual channel DAC. + * @param DAC_Align: Specifies the data alignment for dual channel DAC. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data2: Data for DAC Channel2 to be loaded in the selected data holding register. + * @param Data1: Data for DAC Channel1 to be loaded in the selected data holding register. + * @note In dual mode, a unique register access is required to write in both + * DAC channels at the same time. + * @retval None + */ +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1) +{ + uint32_t data = 0, tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data1)); + assert_param(IS_DAC_DATA(Data2)); + + /* Calculate and set dual DAC data holding register value */ + if (DAC_Align == DAC_Align_8b_R) + { + data = ((uint32_t)Data2 << 8) | Data1; + } + else + { + data = ((uint32_t)Data2 << 16) | Data1; + } + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12RD_OFFSET + DAC_Align; + + /* Set the dual DAC selected data holding register */ + *(__IO uint32_t *)tmp = data; +} + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @retval The selected DAC channel data output value. + */ +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + + tmp = (uint32_t) DAC_BASE ; + tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2); + + /* Returns the DAC channel data output register value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} +/** + * @} + */ + +/** @defgroup DAC_Group2 DMA management functions + * @brief DMA management functions + * +@verbatim + =============================================================================== + DMA management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified DAC channel DMA request. + * @note When enabled DMA1 is generated when an external trigger (EXTI Line9, + * TIM2, TIM4, TIM5, TIM6, TIM7 or TIM8 but not a software trigger) occurs. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the selected DAC channel DMA request. + * This parameter can be: ENABLE or DISABLE. + * @note The DAC channel1 is mapped on DMA1 Stream 5 channel7 which must be + * already configured. + * @note The DAC channel2 is mapped on DMA1 Stream 6 channel7 which must be + * already configured. + * @retval None + */ +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DAC channel DMA request */ + DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel DMA request */ + DAC->CR &= (~(DAC_CR_DMAEN1 << DAC_Channel)); + } +} +/** + * @} + */ + +/** @defgroup DAC_Group3 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified DAC interrupts. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @note The DMA underrun occurs when a second external trigger arrives before the + * acknowledgement for the first external trigger is received (first request). + * @param NewState: new state of the specified DAC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_DAC_IT(DAC_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected DAC interrupts */ + DAC->CR |= (DAC_IT << DAC_Channel); + } + else + { + /* Disable the selected DAC interrupts */ + DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel)); + } +} + +/** + * @brief Checks whether the specified DAC flag is set or not. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_FLAG: specifies the flag to check. + * This parameter can be only of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @note The DMA underrun occurs when a second external trigger arrives before the + * acknowledgement for the first external trigger is received (first request). + * @retval The new state of DAC_FLAG (SET or RESET). + */ +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Check the status of the specified DAC flag */ + if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET) + { + /* DAC_FLAG is set */ + bitstatus = SET; + } + else + { + /* DAC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the DAC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channel's pending flags. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_FLAG: specifies the flag to clear. + * This parameter can be of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @note The DMA underrun occurs when a second external trigger arrives before the + * acknowledgement for the first external trigger is received (first request). + * @retval None + */ +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Clear the selected DAC flags */ + DAC->SR = (DAC_FLAG << DAC_Channel); +} + +/** + * @brief Checks whether the specified DAC interrupt has occurred or not. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt source to check. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @note The DMA underrun occurs when a second external trigger arrives before the + * acknowledgement for the first external trigger is received (first request). + * @retval The new state of DAC_IT (SET or RESET). + */ +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Get the DAC_IT enable bit status */ + enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ; + + /* Check the status of the specified DAC interrupt */ + if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus) + { + /* DAC_IT is set */ + bitstatus = SET; + } + else + { + /* DAC_IT is reset */ + bitstatus = RESET; + } + /* Return the DAC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channel's interrupt pending bits. + * @param DAC_Channel: The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt pending bit to clear. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @note The DMA underrun occurs when a second external trigger arrives before the + * acknowledgement for the first external trigger is received (first request). + * @retval None + */ +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Clear the selected DAC interrupt pending bits */ + DAC->SR = (DAC_IT << DAC_Channel); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_dac.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dac.h new file mode 100644 index 00000000000..d7c27596ce6 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dac.h @@ -0,0 +1,298 @@ +/** + ****************************************************************************** + * @file stm32f4xx_dac.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the DAC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_DAC_H +#define __STM32F4xx_DAC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DAC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief DAC Init structure definition + */ + +typedef struct +{ + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves + are generated, or whether no wave is generated. + This parameter can be a value of @ref DAC_wave_generation */ + + uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or + the maximum amplitude triangle generation for the DAC channel. + This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ +}DAC_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Constants + * @{ + */ + +/** @defgroup DAC_trigger_selection + * @{ + */ + +#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register + has been loaded, and not by external trigger */ +#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */ + +#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */ + +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \ + ((TRIGGER) == DAC_Trigger_T6_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T8_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T7_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T5_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T2_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T4_TRGO) || \ + ((TRIGGER) == DAC_Trigger_Ext_IT9) || \ + ((TRIGGER) == DAC_Trigger_Software)) + +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @{ + */ + +#define DAC_WaveGeneration_None ((uint32_t)0x00000000) +#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040) +#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080) +#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \ + ((WAVE) == DAC_WaveGeneration_Noise) || \ + ((WAVE) == DAC_WaveGeneration_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_lfsrunmask_triangleamplitude + * @{ + */ + +#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ +#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */ +#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */ +#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */ +#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */ +#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */ +#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */ +#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */ +#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */ +#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */ +#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */ +#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */ +#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */ + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \ + ((VALUE) == DAC_TriangleAmplitude_1) || \ + ((VALUE) == DAC_TriangleAmplitude_3) || \ + ((VALUE) == DAC_TriangleAmplitude_7) || \ + ((VALUE) == DAC_TriangleAmplitude_15) || \ + ((VALUE) == DAC_TriangleAmplitude_31) || \ + ((VALUE) == DAC_TriangleAmplitude_63) || \ + ((VALUE) == DAC_TriangleAmplitude_127) || \ + ((VALUE) == DAC_TriangleAmplitude_255) || \ + ((VALUE) == DAC_TriangleAmplitude_511) || \ + ((VALUE) == DAC_TriangleAmplitude_1023) || \ + ((VALUE) == DAC_TriangleAmplitude_2047) || \ + ((VALUE) == DAC_TriangleAmplitude_4095)) +/** + * @} + */ + +/** @defgroup DAC_output_buffer + * @{ + */ + +#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000) +#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002) +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \ + ((STATE) == DAC_OutputBuffer_Disable)) +/** + * @} + */ + +/** @defgroup DAC_Channel_selection + * @{ + */ + +#define DAC_Channel_1 ((uint32_t)0x00000000) +#define DAC_Channel_2 ((uint32_t)0x00000010) +#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \ + ((CHANNEL) == DAC_Channel_2)) +/** + * @} + */ + +/** @defgroup DAC_data_alignement + * @{ + */ + +#define DAC_Align_12b_R ((uint32_t)0x00000000) +#define DAC_Align_12b_L ((uint32_t)0x00000004) +#define DAC_Align_8b_R ((uint32_t)0x00000008) +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \ + ((ALIGN) == DAC_Align_12b_L) || \ + ((ALIGN) == DAC_Align_8b_R)) +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @{ + */ + +#define DAC_Wave_Noise ((uint32_t)0x00000040) +#define DAC_Wave_Triangle ((uint32_t)0x00000080) +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \ + ((WAVE) == DAC_Wave_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_data + * @{ + */ + +#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) +/** + * @} + */ + +/** @defgroup DAC_interrupts_definition + * @{ + */ +#define DAC_IT_DMAUDR ((uint32_t)0x00002000) +#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR)) + +/** + * @} + */ + +/** @defgroup DAC_flags_definition + * @{ + */ + +#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000) +#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the DAC configuration to the default reset state *****/ +void DAC_DeInit(void); + +/* DAC channels configuration: trigger, output buffer, data format functions */ +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct); +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct); +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState); +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data); +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data); +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1); +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel); + +/* DMA management functions ***************************************************/ +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState); +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG); +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG); +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT); +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_DAC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_dbgmcu.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dbgmcu.c new file mode 100644 index 00000000000..4a4d22a95ef --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dbgmcu.c @@ -0,0 +1,175 @@ +/** + ****************************************************************************** + * @file stm32f4xx_dbgmcu.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides all the DBGMCU firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_dbgmcu.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup DBGMCU + * @brief DBGMCU driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup DBGMCU_Private_Functions + * @{ + */ + +/** + * @brief Returns the device revision identifier. + * @param None + * @retval Device revision identifier + */ +uint32_t DBGMCU_GetREVID(void) +{ + return(DBGMCU->IDCODE >> 16); +} + +/** + * @brief Returns the device identifier. + * @param None + * @retval Device identifier + */ +uint32_t DBGMCU_GetDEVID(void) +{ + return(DBGMCU->IDCODE & IDCODE_DEVID_MASK); +} + +/** + * @brief Configures low power mode behavior when the MCU is in Debug mode. + * @param DBGMCU_Periph: specifies the low power mode. + * This parameter can be any combination of the following values: + * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode + * @arg DBGMCU_STOP: Keep debugger connection during STOP mode + * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode + * @param NewState: new state of the specified low power mode in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + DBGMCU->CR |= DBGMCU_Periph; + } + else + { + DBGMCU->CR &= ~DBGMCU_Periph; + } +} + +/** + * @brief Configures APB1 peripheral behavior when the MCU is in Debug mode. + * @param DBGMCU_Periph: specifies the APB1 peripheral. + * This parameter can be any combination of the following values: + * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted + * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted + * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted + * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted + * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted + * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted + * @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted + * @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted + * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted + * @arg DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter stopped when Core is halted. + * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted + * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted + * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted + * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted + * @arg DBGMCU_I2C3_SMBUS_TIMEOUT: I2C3 SMBUS timeout mode stopped when Core is halted + * @arg DBGMCU_CAN2_STOP: Debug CAN1 stopped when Core is halted + * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_APB1PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->APB1FZ |= DBGMCU_Periph; + } + else + { + DBGMCU->APB1FZ &= ~DBGMCU_Periph; + } +} + +/** + * @brief Configures APB2 peripheral behavior when the MCU is in Debug mode. + * @param DBGMCU_Periph: specifies the APB2 peripheral. + * This parameter can be any combination of the following values: + * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted + * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted + * @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted + * @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted + * @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted + * @param NewState: new state of the specified peripheral in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_APB2PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->APB2FZ |= DBGMCU_Periph; + } + else + { + DBGMCU->APB2FZ &= ~DBGMCU_Periph; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_dbgmcu.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dbgmcu.h new file mode 100644 index 00000000000..b10b134d66d --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dbgmcu.h @@ -0,0 +1,103 @@ +/** + ****************************************************************************** + * @file stm32f4xx_dbgmcu.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the DBGMCU firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_DBGMCU_H +#define __STM32F4xx_DBGMCU_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DBGMCU + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DBGMCU_Exported_Constants + * @{ + */ +#define DBGMCU_SLEEP ((uint32_t)0x00000001) +#define DBGMCU_STOP ((uint32_t)0x00000002) +#define DBGMCU_STANDBY ((uint32_t)0x00000004) +#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00)) + +#define DBGMCU_TIM2_STOP ((uint32_t)0x00000001) +#define DBGMCU_TIM3_STOP ((uint32_t)0x00000002) +#define DBGMCU_TIM4_STOP ((uint32_t)0x00000004) +#define DBGMCU_TIM5_STOP ((uint32_t)0x00000008) +#define DBGMCU_TIM6_STOP ((uint32_t)0x00000010) +#define DBGMCU_TIM7_STOP ((uint32_t)0x00000020) +#define DBGMCU_TIM12_STOP ((uint32_t)0x00000040) +#define DBGMCU_TIM13_STOP ((uint32_t)0x00000080) +#define DBGMCU_TIM14_STOP ((uint32_t)0x00000100) +#define DBGMCU_RTC_STOP ((uint32_t)0x00000400) +#define DBGMCU_WWDG_STOP ((uint32_t)0x00000800) +#define DBGMCU_IWDG_STOP ((uint32_t)0x00001000) +#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) +#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000) +#define DBGMCU_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000) +#define DBGMCU_CAN1_STOP ((uint32_t)0x02000000) +#define DBGMCU_CAN2_STOP ((uint32_t)0x04000000) +#define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xF91FE200) == 0x00) && ((PERIPH) != 0x00)) + +#define DBGMCU_TIM1_STOP ((uint32_t)0x00000001) +#define DBGMCU_TIM8_STOP ((uint32_t)0x00000002) +#define DBGMCU_TIM9_STOP ((uint32_t)0x00010000) +#define DBGMCU_TIM10_STOP ((uint32_t)0x00020000) +#define DBGMCU_TIM11_STOP ((uint32_t)0x00040000) +#define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFF8FFFC) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +uint32_t DBGMCU_GetREVID(void); +uint32_t DBGMCU_GetDEVID(void); +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); +void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState); +void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_DBGMCU_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_dcmi.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dcmi.c new file mode 100644 index 00000000000..2fe729e5879 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dcmi.c @@ -0,0 +1,535 @@ +/** + ****************************************************************************** + * @file stm32f4xx_dcmi.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the DCMI peripheral: + * - Initialization and Configuration + * - Image capture functions + * - Interrupts and flags management + * + * @verbatim + * + * + * =================================================================== + * How to use this driver + * =================================================================== + * + * The sequence below describes how to use this driver to capture image + * from a camera module connected to the DCMI Interface. + * This sequence does not take into account the configuration of the + * camera module, which should be made before to configure and enable + * the DCMI to capture images. + * + * 1. Enable the clock for the DCMI and associated GPIOs using the following functions: + * RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_DCMI, ENABLE); + * RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + * + * 2. DCMI pins configuration + * - Connect the involved DCMI pins to AF13 using the following function + * GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_DCMI); + * - Configure these DCMI pins in alternate function mode by calling the function + * GPIO_Init(); + * + * 3. Declare a DCMI_InitTypeDef structure, for example: + * DCMI_InitTypeDef DCMI_InitStructure; + * and fill the DCMI_InitStructure variable with the allowed values + * of the structure member. + * + * 4. Initialize the DCMI interface by calling the function + * DCMI_Init(&DCMI_InitStructure); + * + * 5. Configure the DMA2_Stream1 channel1 to transfer Data from DCMI DR + * register to the destination memory buffer. + * + * 6. Enable DCMI interface using the function + * DCMI_Cmd(ENABLE); + * + * 7. Start the image capture using the function + * DCMI_CaptureCmd(ENABLE); + * + * 8. At this stage the DCMI interface waits for the first start of frame, + * then a DMA request is generated continuously/once (depending on the + * mode used, Continuous/Snapshot) to transfer the received data into + * the destination memory. + * + * @note If you need to capture only a rectangular window from the received + * image, you have to use the DCMI_CROPConfig() function to configure + * the coordinates and size of the window to be captured, then enable + * the Crop feature using DCMI_CROPCmd(ENABLE); + * In this case, the Crop configuration should be made before to enable + * and start the DCMI interface. + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_dcmi.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup DCMI + * @brief DCMI driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup DCMI_Private_Functions + * @{ + */ + +/** @defgroup DCMI_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the DCMI registers to their default reset values. + * @param None + * @retval None + */ +void DCMI_DeInit(void) +{ + DCMI->CR = 0x0; + DCMI->IER = 0x0; + DCMI->ICR = 0x1F; + DCMI->ESCR = 0x0; + DCMI->ESUR = 0x0; + DCMI->CWSTRTR = 0x0; + DCMI->CWSIZER = 0x0; +} + +/** + * @brief Initializes the DCMI according to the specified parameters in the DCMI_InitStruct. + * @param DCMI_InitStruct: pointer to a DCMI_InitTypeDef structure that contains + * the configuration information for the DCMI. + * @retval None + */ +void DCMI_Init(DCMI_InitTypeDef* DCMI_InitStruct) +{ + uint32_t temp = 0x0; + + /* Check the parameters */ + assert_param(IS_DCMI_CAPTURE_MODE(DCMI_InitStruct->DCMI_CaptureMode)); + assert_param(IS_DCMI_SYNCHRO(DCMI_InitStruct->DCMI_SynchroMode)); + assert_param(IS_DCMI_PCKPOLARITY(DCMI_InitStruct->DCMI_PCKPolarity)); + assert_param(IS_DCMI_VSPOLARITY(DCMI_InitStruct->DCMI_VSPolarity)); + assert_param(IS_DCMI_HSPOLARITY(DCMI_InitStruct->DCMI_HSPolarity)); + assert_param(IS_DCMI_CAPTURE_RATE(DCMI_InitStruct->DCMI_CaptureRate)); + assert_param(IS_DCMI_EXTENDED_DATA(DCMI_InitStruct->DCMI_ExtendedDataMode)); + + /* The DCMI configuration registers should be programmed correctly before + enabling the CR_ENABLE Bit and the CR_CAPTURE Bit */ + DCMI->CR &= ~(DCMI_CR_ENABLE | DCMI_CR_CAPTURE); + + /* Reset the old DCMI configuration */ + temp = DCMI->CR; + + temp &= ~((uint32_t)DCMI_CR_CM | DCMI_CR_ESS | DCMI_CR_PCKPOL | + DCMI_CR_HSPOL | DCMI_CR_VSPOL | DCMI_CR_FCRC_0 | + DCMI_CR_FCRC_1 | DCMI_CR_EDM_0 | DCMI_CR_EDM_1); + + /* Sets the new configuration of the DCMI peripheral */ + temp |= ((uint32_t)DCMI_InitStruct->DCMI_CaptureMode | + DCMI_InitStruct->DCMI_SynchroMode | + DCMI_InitStruct->DCMI_PCKPolarity | + DCMI_InitStruct->DCMI_VSPolarity | + DCMI_InitStruct->DCMI_HSPolarity | + DCMI_InitStruct->DCMI_CaptureRate | + DCMI_InitStruct->DCMI_ExtendedDataMode); + + DCMI->CR = temp; +} + +/** + * @brief Fills each DCMI_InitStruct member with its default value. + * @param DCMI_InitStruct : pointer to a DCMI_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DCMI_StructInit(DCMI_InitTypeDef* DCMI_InitStruct) +{ + /* Set the default configuration */ + DCMI_InitStruct->DCMI_CaptureMode = DCMI_CaptureMode_Continuous; + DCMI_InitStruct->DCMI_SynchroMode = DCMI_SynchroMode_Hardware; + DCMI_InitStruct->DCMI_PCKPolarity = DCMI_PCKPolarity_Falling; + DCMI_InitStruct->DCMI_VSPolarity = DCMI_VSPolarity_Low; + DCMI_InitStruct->DCMI_HSPolarity = DCMI_HSPolarity_Low; + DCMI_InitStruct->DCMI_CaptureRate = DCMI_CaptureRate_All_Frame; + DCMI_InitStruct->DCMI_ExtendedDataMode = DCMI_ExtendedDataMode_8b; +} + +/** + * @brief Initializes the DCMI peripheral CROP mode according to the specified + * parameters in the DCMI_CROPInitStruct. + * @note This function should be called before to enable and start the DCMI interface. + * @param DCMI_CROPInitStruct: pointer to a DCMI_CROPInitTypeDef structure that + * contains the configuration information for the DCMI peripheral CROP mode. + * @retval None + */ +void DCMI_CROPConfig(DCMI_CROPInitTypeDef* DCMI_CROPInitStruct) +{ + /* Sets the CROP window coordinates */ + DCMI->CWSTRTR = (uint32_t)((uint32_t)DCMI_CROPInitStruct->DCMI_HorizontalOffsetCount | + ((uint32_t)DCMI_CROPInitStruct->DCMI_VerticalStartLine << 16)); + + /* Sets the CROP window size */ + DCMI->CWSIZER = (uint32_t)(DCMI_CROPInitStruct->DCMI_CaptureCount | + ((uint32_t)DCMI_CROPInitStruct->DCMI_VerticalLineCount << 16)); +} + +/** + * @brief Enables or disables the DCMI Crop feature. + * @note This function should be called before to enable and start the DCMI interface. + * @param NewState: new state of the DCMI Crop feature. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DCMI_CROPCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DCMI Crop feature */ + DCMI->CR |= (uint32_t)DCMI_CR_CROP; + } + else + { + /* Disable the DCMI Crop feature */ + DCMI->CR &= ~(uint32_t)DCMI_CR_CROP; + } +} + +/** + * @brief Sets the embedded synchronization codes + * @param DCMI_CodesInitTypeDef: pointer to a DCMI_CodesInitTypeDef structure that + * contains the embedded synchronization codes for the DCMI peripheral. + * @retval None + */ +void DCMI_SetEmbeddedSynchroCodes(DCMI_CodesInitTypeDef* DCMI_CodesInitStruct) +{ + DCMI->ESCR = (uint32_t)(DCMI_CodesInitStruct->DCMI_FrameStartCode | + ((uint32_t)DCMI_CodesInitStruct->DCMI_LineStartCode << 8)| + ((uint32_t)DCMI_CodesInitStruct->DCMI_LineEndCode << 16)| + ((uint32_t)DCMI_CodesInitStruct->DCMI_FrameEndCode << 24)); +} + +/** + * @brief Enables or disables the DCMI JPEG format. + * @note The Crop and Embedded Synchronization features cannot be used in this mode. + * @param NewState: new state of the DCMI JPEG format. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DCMI_JPEGCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DCMI JPEG format */ + DCMI->CR |= (uint32_t)DCMI_CR_JPEG; + } + else + { + /* Disable the DCMI JPEG format */ + DCMI->CR &= ~(uint32_t)DCMI_CR_JPEG; + } +} +/** + * @} + */ + +/** @defgroup DCMI_Group2 Image capture functions + * @brief Image capture functions + * +@verbatim + =============================================================================== + Image capture functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the DCMI interface. + * @param NewState: new state of the DCMI interface. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DCMI_Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DCMI by setting ENABLE bit */ + DCMI->CR |= (uint32_t)DCMI_CR_ENABLE; + } + else + { + /* Disable the DCMI by clearing ENABLE bit */ + DCMI->CR &= ~(uint32_t)DCMI_CR_ENABLE; + } +} + +/** + * @brief Enables or disables the DCMI Capture. + * @param NewState: new state of the DCMI capture. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DCMI_CaptureCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DCMI Capture */ + DCMI->CR |= (uint32_t)DCMI_CR_CAPTURE; + } + else + { + /* Disable the DCMI Capture */ + DCMI->CR &= ~(uint32_t)DCMI_CR_CAPTURE; + } +} + +/** + * @brief Reads the data stored in the DR register. + * @param None + * @retval Data register value + */ +uint32_t DCMI_ReadData(void) +{ + return DCMI->DR; +} +/** + * @} + */ + +/** @defgroup DCMI_Group3 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the DCMI interface interrupts. + * @param DCMI_IT: specifies the DCMI interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask + * @arg DCMI_IT_OVF: Overflow interrupt mask + * @arg DCMI_IT_ERR: Synchronization error interrupt mask + * @arg DCMI_IT_VSYNC: VSYNC interrupt mask + * @arg DCMI_IT_LINE: Line interrupt mask + * @param NewState: new state of the specified DCMI interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DCMI_ITConfig(uint16_t DCMI_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DCMI_CONFIG_IT(DCMI_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Interrupt sources */ + DCMI->IER |= DCMI_IT; + } + else + { + /* Disable the Interrupt sources */ + DCMI->IER &= (uint16_t)(~DCMI_IT); + } +} + +/** + * @brief Checks whether the DCMI interface flag is set or not. + * @param DCMI_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg DCMI_FLAG_FRAMERI: Frame capture complete Raw flag mask + * @arg DCMI_FLAG_OVFRI: Overflow Raw flag mask + * @arg DCMI_FLAG_ERRRI: Synchronization error Raw flag mask + * @arg DCMI_FLAG_VSYNCRI: VSYNC Raw flag mask + * @arg DCMI_FLAG_LINERI: Line Raw flag mask + * @arg DCMI_FLAG_FRAMEMI: Frame capture complete Masked flag mask + * @arg DCMI_FLAG_OVFMI: Overflow Masked flag mask + * @arg DCMI_FLAG_ERRMI: Synchronization error Masked flag mask + * @arg DCMI_FLAG_VSYNCMI: VSYNC Masked flag mask + * @arg DCMI_FLAG_LINEMI: Line Masked flag mask + * @arg DCMI_FLAG_HSYNC: HSYNC flag mask + * @arg DCMI_FLAG_VSYNC: VSYNC flag mask + * @arg DCMI_FLAG_FNE: Fifo not empty flag mask + * @retval The new state of DCMI_FLAG (SET or RESET). + */ +FlagStatus DCMI_GetFlagStatus(uint16_t DCMI_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t dcmireg, tempreg = 0; + + /* Check the parameters */ + assert_param(IS_DCMI_GET_FLAG(DCMI_FLAG)); + + /* Get the DCMI register index */ + dcmireg = (((uint16_t)DCMI_FLAG) >> 12); + + if (dcmireg == 0x01) /* The FLAG is in RISR register */ + { + tempreg= DCMI->RISR; + } + else if (dcmireg == 0x02) /* The FLAG is in SR register */ + { + tempreg = DCMI->SR; + } + else /* The FLAG is in MISR register */ + { + tempreg = DCMI->MISR; + } + + if ((tempreg & DCMI_FLAG) != (uint16_t)RESET ) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the DCMI_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DCMI's pending flags. + * @param DCMI_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DCMI_FLAG_FRAMERI: Frame capture complete Raw flag mask + * @arg DCMI_FLAG_OVFRI: Overflow Raw flag mask + * @arg DCMI_FLAG_ERRRI: Synchronization error Raw flag mask + * @arg DCMI_FLAG_VSYNCRI: VSYNC Raw flag mask + * @arg DCMI_FLAG_LINERI: Line Raw flag mask + * @retval None + */ +void DCMI_ClearFlag(uint16_t DCMI_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DCMI_CLEAR_FLAG(DCMI_FLAG)); + + /* Clear the flag by writing in the ICR register 1 in the corresponding + Flag position*/ + + DCMI->ICR = DCMI_FLAG; +} + +/** + * @brief Checks whether the DCMI interrupt has occurred or not. + * @param DCMI_IT: specifies the DCMI interrupt source to check. + * This parameter can be one of the following values: + * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask + * @arg DCMI_IT_OVF: Overflow interrupt mask + * @arg DCMI_IT_ERR: Synchronization error interrupt mask + * @arg DCMI_IT_VSYNC: VSYNC interrupt mask + * @arg DCMI_IT_LINE: Line interrupt mask + * @retval The new state of DCMI_IT (SET or RESET). + */ +ITStatus DCMI_GetITStatus(uint16_t DCMI_IT) +{ + ITStatus bitstatus = RESET; + uint32_t itstatus = 0; + + /* Check the parameters */ + assert_param(IS_DCMI_GET_IT(DCMI_IT)); + + itstatus = DCMI->MISR & DCMI_IT; /* Only masked interrupts are checked */ + + if ((itstatus != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the DCMI's interrupt pending bits. + * @param DCMI_IT: specifies the DCMI interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask + * @arg DCMI_IT_OVF: Overflow interrupt mask + * @arg DCMI_IT_ERR: Synchronization error interrupt mask + * @arg DCMI_IT_VSYNC: VSYNC interrupt mask + * @arg DCMI_IT_LINE: Line interrupt mask + * @retval None + */ +void DCMI_ClearITPendingBit(uint16_t DCMI_IT) +{ + /* Clear the interrupt pending Bit by writing in the ICR register 1 in the + corresponding pending Bit position*/ + + DCMI->ICR = DCMI_IT; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_dcmi.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dcmi.h new file mode 100644 index 00000000000..c40b3c87fe9 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dcmi.h @@ -0,0 +1,306 @@ +/** + ****************************************************************************** + * @file stm32f4xx_dcmi.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the DCMI firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_DCMI_H +#define __STM32F4xx_DCMI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DCMI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** + * @brief DCMI Init structure definition + */ +typedef struct +{ + uint16_t DCMI_CaptureMode; /*!< Specifies the Capture Mode: Continuous or Snapshot. + This parameter can be a value of @ref DCMI_Capture_Mode */ + + uint16_t DCMI_SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded. + This parameter can be a value of @ref DCMI_Synchronization_Mode */ + + uint16_t DCMI_PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising. + This parameter can be a value of @ref DCMI_PIXCK_Polarity */ + + uint16_t DCMI_VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low. + This parameter can be a value of @ref DCMI_VSYNC_Polarity */ + + uint16_t DCMI_HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low. + This parameter can be a value of @ref DCMI_HSYNC_Polarity */ + + uint16_t DCMI_CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4. + This parameter can be a value of @ref DCMI_Capture_Rate */ + + uint16_t DCMI_ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit. + This parameter can be a value of @ref DCMI_Extended_Data_Mode */ +} DCMI_InitTypeDef; + +/** + * @brief DCMI CROP Init structure definition + */ +typedef struct +{ + uint16_t DCMI_VerticalStartLine; /*!< Specifies the Vertical start line count from which the image capture + will start. This parameter can be a value between 0x00 and 0x1FFF */ + + uint16_t DCMI_HorizontalOffsetCount; /*!< Specifies the number of pixel clocks to count before starting a capture. + This parameter can be a value between 0x00 and 0x3FFF */ + + uint16_t DCMI_VerticalLineCount; /*!< Specifies the number of lines to be captured from the starting point. + This parameter can be a value between 0x00 and 0x3FFF */ + + uint16_t DCMI_CaptureCount; /*!< Specifies the number of pixel clocks to be captured from the starting + point on the same line. + This parameter can be a value between 0x00 and 0x3FFF */ +} DCMI_CROPInitTypeDef; + +/** + * @brief DCMI Embedded Synchronisation CODE Init structure definition + */ +typedef struct +{ + uint8_t DCMI_FrameStartCode; /*!< Specifies the code of the frame start delimiter. */ + uint8_t DCMI_LineStartCode; /*!< Specifies the code of the line start delimiter. */ + uint8_t DCMI_LineEndCode; /*!< Specifies the code of the line end delimiter. */ + uint8_t DCMI_FrameEndCode; /*!< Specifies the code of the frame end delimiter. */ +} DCMI_CodesInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DCMI_Exported_Constants + * @{ + */ + +/** @defgroup DCMI_Capture_Mode + * @{ + */ +#define DCMI_CaptureMode_Continuous ((uint16_t)0x0000) /*!< The received data are transferred continuously + into the destination memory through the DMA */ +#define DCMI_CaptureMode_SnapShot ((uint16_t)0x0002) /*!< Once activated, the interface waits for the start of + frame and then transfers a single frame through the DMA */ +#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_CaptureMode_Continuous) || \ + ((MODE) == DCMI_CaptureMode_SnapShot)) +/** + * @} + */ + + +/** @defgroup DCMI_Synchronization_Mode + * @{ + */ +#define DCMI_SynchroMode_Hardware ((uint16_t)0x0000) /*!< Hardware synchronization data capture (frame/line start/stop) + is synchronized with the HSYNC/VSYNC signals */ +#define DCMI_SynchroMode_Embedded ((uint16_t)0x0010) /*!< Embedded synchronization data capture is synchronized with + synchronization codes embedded in the data flow */ +#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SynchroMode_Hardware) || \ + ((MODE) == DCMI_SynchroMode_Embedded)) +/** + * @} + */ + + +/** @defgroup DCMI_PIXCK_Polarity + * @{ + */ +#define DCMI_PCKPolarity_Falling ((uint16_t)0x0000) /*!< Pixel clock active on Falling edge */ +#define DCMI_PCKPolarity_Rising ((uint16_t)0x0020) /*!< Pixel clock active on Rising edge */ +#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPolarity_Falling) || \ + ((POLARITY) == DCMI_PCKPolarity_Rising)) +/** + * @} + */ + + +/** @defgroup DCMI_VSYNC_Polarity + * @{ + */ +#define DCMI_VSPolarity_Low ((uint16_t)0x0000) /*!< Vertical synchronization active Low */ +#define DCMI_VSPolarity_High ((uint16_t)0x0080) /*!< Vertical synchronization active High */ +#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPolarity_Low) || \ + ((POLARITY) == DCMI_VSPolarity_High)) +/** + * @} + */ + + +/** @defgroup DCMI_HSYNC_Polarity + * @{ + */ +#define DCMI_HSPolarity_Low ((uint16_t)0x0000) /*!< Horizontal synchronization active Low */ +#define DCMI_HSPolarity_High ((uint16_t)0x0040) /*!< Horizontal synchronization active High */ +#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPolarity_Low) || \ + ((POLARITY) == DCMI_HSPolarity_High)) +/** + * @} + */ + + +/** @defgroup DCMI_Capture_Rate + * @{ + */ +#define DCMI_CaptureRate_All_Frame ((uint16_t)0x0000) /*!< All frames are captured */ +#define DCMI_CaptureRate_1of2_Frame ((uint16_t)0x0100) /*!< Every alternate frame captured */ +#define DCMI_CaptureRate_1of4_Frame ((uint16_t)0x0200) /*!< One frame in 4 frames captured */ +#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CaptureRate_All_Frame) || \ + ((RATE) == DCMI_CaptureRate_1of2_Frame) ||\ + ((RATE) == DCMI_CaptureRate_1of4_Frame)) +/** + * @} + */ + + +/** @defgroup DCMI_Extended_Data_Mode + * @{ + */ +#define DCMI_ExtendedDataMode_8b ((uint16_t)0x0000) /*!< Interface captures 8-bit data on every pixel clock */ +#define DCMI_ExtendedDataMode_10b ((uint16_t)0x0400) /*!< Interface captures 10-bit data on every pixel clock */ +#define DCMI_ExtendedDataMode_12b ((uint16_t)0x0800) /*!< Interface captures 12-bit data on every pixel clock */ +#define DCMI_ExtendedDataMode_14b ((uint16_t)0x0C00) /*!< Interface captures 14-bit data on every pixel clock */ +#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_ExtendedDataMode_8b) || \ + ((DATA) == DCMI_ExtendedDataMode_10b) ||\ + ((DATA) == DCMI_ExtendedDataMode_12b) ||\ + ((DATA) == DCMI_ExtendedDataMode_14b)) +/** + * @} + */ + + +/** @defgroup DCMI_interrupt_sources + * @{ + */ +#define DCMI_IT_FRAME ((uint16_t)0x0001) +#define DCMI_IT_OVF ((uint16_t)0x0002) +#define DCMI_IT_ERR ((uint16_t)0x0004) +#define DCMI_IT_VSYNC ((uint16_t)0x0008) +#define DCMI_IT_LINE ((uint16_t)0x0010) +#define IS_DCMI_CONFIG_IT(IT) ((((IT) & (uint16_t)0xFFE0) == 0x0000) && ((IT) != 0x0000)) +#define IS_DCMI_GET_IT(IT) (((IT) == DCMI_IT_FRAME) || \ + ((IT) == DCMI_IT_OVF) || \ + ((IT) == DCMI_IT_ERR) || \ + ((IT) == DCMI_IT_VSYNC) || \ + ((IT) == DCMI_IT_LINE)) +/** + * @} + */ + + +/** @defgroup DCMI_Flags + * @{ + */ +/** + * @brief DCMI SR register + */ +#define DCMI_FLAG_HSYNC ((uint16_t)0x2001) +#define DCMI_FLAG_VSYNC ((uint16_t)0x2002) +#define DCMI_FLAG_FNE ((uint16_t)0x2004) +/** + * @brief DCMI RISR register + */ +#define DCMI_FLAG_FRAMERI ((uint16_t)0x0001) +#define DCMI_FLAG_OVFRI ((uint16_t)0x0002) +#define DCMI_FLAG_ERRRI ((uint16_t)0x0004) +#define DCMI_FLAG_VSYNCRI ((uint16_t)0x0008) +#define DCMI_FLAG_LINERI ((uint16_t)0x0010) +/** + * @brief DCMI MISR register + */ +#define DCMI_FLAG_FRAMEMI ((uint16_t)0x1001) +#define DCMI_FLAG_OVFMI ((uint16_t)0x1002) +#define DCMI_FLAG_ERRMI ((uint16_t)0x1004) +#define DCMI_FLAG_VSYNCMI ((uint16_t)0x1008) +#define DCMI_FLAG_LINEMI ((uint16_t)0x1010) +#define IS_DCMI_GET_FLAG(FLAG) (((FLAG) == DCMI_FLAG_HSYNC) || \ + ((FLAG) == DCMI_FLAG_VSYNC) || \ + ((FLAG) == DCMI_FLAG_FNE) || \ + ((FLAG) == DCMI_FLAG_FRAMERI) || \ + ((FLAG) == DCMI_FLAG_OVFRI) || \ + ((FLAG) == DCMI_FLAG_ERRRI) || \ + ((FLAG) == DCMI_FLAG_VSYNCRI) || \ + ((FLAG) == DCMI_FLAG_LINERI) || \ + ((FLAG) == DCMI_FLAG_FRAMEMI) || \ + ((FLAG) == DCMI_FLAG_OVFMI) || \ + ((FLAG) == DCMI_FLAG_ERRMI) || \ + ((FLAG) == DCMI_FLAG_VSYNCMI) || \ + ((FLAG) == DCMI_FLAG_LINEMI)) + +#define IS_DCMI_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFE0) == 0x0000) && ((FLAG) != 0x0000)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the DCMI configuration to the default reset state ****/ +void DCMI_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +void DCMI_Init(DCMI_InitTypeDef* DCMI_InitStruct); +void DCMI_StructInit(DCMI_InitTypeDef* DCMI_InitStruct); +void DCMI_CROPConfig(DCMI_CROPInitTypeDef* DCMI_CROPInitStruct); +void DCMI_CROPCmd(FunctionalState NewState); +void DCMI_SetEmbeddedSynchroCodes(DCMI_CodesInitTypeDef* DCMI_CodesInitStruct); +void DCMI_JPEGCmd(FunctionalState NewState); + +/* Image capture functions ****************************************************/ +void DCMI_Cmd(FunctionalState NewState); +void DCMI_CaptureCmd(FunctionalState NewState); +uint32_t DCMI_ReadData(void); + +/* Interrupts and flags management functions **********************************/ +void DCMI_ITConfig(uint16_t DCMI_IT, FunctionalState NewState); +FlagStatus DCMI_GetFlagStatus(uint16_t DCMI_FLAG); +void DCMI_ClearFlag(uint16_t DCMI_FLAG); +ITStatus DCMI_GetITStatus(uint16_t DCMI_IT); +void DCMI_ClearITPendingBit(uint16_t DCMI_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_DCMI_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.c new file mode 100644 index 00000000000..7bc3000d663 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.c @@ -0,0 +1,1284 @@ +/** + ****************************************************************************** + * @file stm32f4xx_dma.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access controller (DMA): + * - Initialization and Configuration + * - Data Counter + * - Double Buffer mode configuration and command + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. Enable The DMA controller clock using RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_DMA1, ENABLE) + * function for DMA1 or using RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_DMA2, ENABLE) + * function for DMA2. + * + * 2. Enable and configure the peripheral to be connected to the DMA Stream + * (except for internal SRAM / FLASH memories: no initialization is + * necessary). + * + * 3. For a given Stream, program the required configuration through following parameters: + * Source and Destination addresses, Transfer Direction, Transfer size, Source and Destination + * data formats, Circular or Normal mode, Stream Priority level, Source and Destination + * Incrementation mode, FIFO mode and its Threshold (if needed), Burst mode for Source and/or + * Destination (if needed) using the DMA_Init() function. + * To avoid filling un-nesecessary fields, you can call DMA_StructInit() function + * to initialize a given structure with default values (reset values), the modify + * only necessary fields (ie. Source and Destination addresses, Transfer size and Data Formats). + * + * 4. Enable the NVIC and the corresponding interrupt(s) using the function + * DMA_ITConfig() if you need to use DMA interrupts. + * + * 5. Optionally, if the Circular mode is enabled, you can use the Double buffer mode by configuring + * the second Memory address and the first Memory to be used through the function + * DMA_DoubleBufferModeConfig(). Then enable the Double buffer mode through the function + * DMA_DoubleBufferModeCmd(). These operations must be done before step 6. + * + * 6. Enable the DMA stream using the DMA_Cmd() function. + * + * 7. Activate the needed Stream Request using PPP_DMACmd() function for + * any PPP peripheral except internal SRAM and FLASH (ie. SPI, USART ...) + * The function allowing this operation is provided in each PPP peripheral + * driver (ie. SPI_DMACmd for SPI peripheral). + * Once the Stream is enabled, it is not possible to modify its configuration + * unless the stream is stopped and disabled. + * After enabling the Stream, it is advised to monitor the EN bit status using + * the function DMA_GetCmdStatus(). In case of configuration errors or bus errors + * this bit will remain reset and all transfers on this Stream will remain on hold. + * + * 8. Optionally, you can configure the number of data to be transferred + * when the Stream is disabled (ie. after each Transfer Complete event + * or when a Transfer Error occurs) using the function DMA_SetCurrDataCounter(). + * And you can get the number of remaining data to be transferred using + * the function DMA_GetCurrDataCounter() at run time (when the DMA Stream is + * enabled and running). + * + * 9. To control DMA events you can use one of the following + * two methods: + * a- Check on DMA Stream flags using the function DMA_GetFlagStatus(). + * b- Use DMA interrupts through the function DMA_ITConfig() at initialization + * phase and DMA_GetITStatus() function into interrupt routines in + * communication phase. + * After checking on a flag you should clear it using DMA_ClearFlag() + * function. And after checking on an interrupt event you should + * clear it using DMA_ClearITPendingBit() function. + * + * 10. Optionally, if Circular mode and Double Buffer mode are enabled, you can modify + * the Memory Addresses using the function DMA_MemoryTargetConfig(). Make sure that + * the Memory Address to be modified is not the one currently in use by DMA Stream. + * This condition can be monitored using the function DMA_GetCurrentMemoryTarget(). + * + * 11. Optionally, Pause-Resume operations may be performed: + * The DMA_Cmd() function may be used to perform Pause-Resume operation. When a + * transfer is ongoing, calling this function to disable the Stream will cause the + * transfer to be paused. All configuration registers and the number of remaining + * data will be preserved. When calling again this function to re-enable the Stream, + * the transfer will be resumed from the point where it was paused. + * + * @note Memory-to-Memory transfer is possible by setting the address of the memory into + * the Peripheral registers. In this mode, Circular mode and Double Buffer mode + * are not allowed. + * + * @note The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is + * possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set + * Half-Word data size for the peripheral to access its data register and set Word data size + * for the Memory to gain in access time. Each two Half-words will be packed and written in + * a single access to a Word in the Memory). + * + * @note When FIFO is disabled, it is not allowed to configure different Data Sizes for Source + * and Destination. In this case the Peripheral Data Size will be applied to both Source + * and Destination. + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_dma.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup DMA + * @brief DMA driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Masks Definition */ +#define TRANSFER_IT_ENABLE_MASK (uint32_t)(DMA_SxCR_TCIE | DMA_SxCR_HTIE | \ + DMA_SxCR_TEIE | DMA_SxCR_DMEIE) + +#define DMA_Stream0_IT_MASK (uint32_t)(DMA_LISR_FEIF0 | DMA_LISR_DMEIF0 | \ + DMA_LISR_TEIF0 | DMA_LISR_HTIF0 | \ + DMA_LISR_TCIF0) + +#define DMA_Stream1_IT_MASK (uint32_t)(DMA_Stream0_IT_MASK << 6) +#define DMA_Stream2_IT_MASK (uint32_t)(DMA_Stream0_IT_MASK << 16) +#define DMA_Stream3_IT_MASK (uint32_t)(DMA_Stream0_IT_MASK << 22) +#define DMA_Stream4_IT_MASK (uint32_t)(DMA_Stream0_IT_MASK | (uint32_t)0x20000000) +#define DMA_Stream5_IT_MASK (uint32_t)(DMA_Stream1_IT_MASK | (uint32_t)0x20000000) +#define DMA_Stream6_IT_MASK (uint32_t)(DMA_Stream2_IT_MASK | (uint32_t)0x20000000) +#define DMA_Stream7_IT_MASK (uint32_t)(DMA_Stream3_IT_MASK | (uint32_t)0x20000000) +#define TRANSFER_IT_MASK (uint32_t)0x0F3C0F3C +#define HIGH_ISR_MASK (uint32_t)0x20000000 +#define RESERVED_MASK (uint32_t)0x0F7D0F7D + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + +/** @defgroup DMA_Private_Functions + * @{ + */ + +/** @defgroup DMA_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + + This subsection provides functions allowing to initialize the DMA Stream source + and destination addresses, incrementation and data sizes, transfer direction, + buffer size, circular/normal mode selection, memory-to-memory mode selection + and Stream priority value. + + The DMA_Init() function follows the DMA configuration procedures as described in + reference manual (RM0090) except the first point: waiting on EN bit to be reset. + This condition should be checked by user application using the function DMA_GetCmdStatus() + before calling the DMA_Init() function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the DMAy Streamx registers to their default reset values. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @retval None + */ +void DMA_DeInit(DMA_Stream_TypeDef* DMAy_Streamx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + + /* Disable the selected DMAy Streamx */ + DMAy_Streamx->CR &= ~((uint32_t)DMA_SxCR_EN); + + /* Reset DMAy Streamx control register */ + DMAy_Streamx->CR = 0; + + /* Reset DMAy Streamx Number of Data to Transfer register */ + DMAy_Streamx->NDTR = 0; + + /* Reset DMAy Streamx peripheral address register */ + DMAy_Streamx->PAR = 0; + + /* Reset DMAy Streamx memory 0 address register */ + DMAy_Streamx->M0AR = 0; + + /* Reset DMAy Streamx memory 1 address register */ + DMAy_Streamx->M1AR = 0; + + /* Reset DMAy Streamx FIFO control register */ + DMAy_Streamx->FCR = (uint32_t)0x00000021; + + /* Reset interrupt pending bits for the selected stream */ + if (DMAy_Streamx == DMA1_Stream0) + { + /* Reset interrupt pending bits for DMA1 Stream0 */ + DMA1->LIFCR = DMA_Stream0_IT_MASK; + } + else if (DMAy_Streamx == DMA1_Stream1) + { + /* Reset interrupt pending bits for DMA1 Stream1 */ + DMA1->LIFCR = DMA_Stream1_IT_MASK; + } + else if (DMAy_Streamx == DMA1_Stream2) + { + /* Reset interrupt pending bits for DMA1 Stream2 */ + DMA1->LIFCR = DMA_Stream2_IT_MASK; + } + else if (DMAy_Streamx == DMA1_Stream3) + { + /* Reset interrupt pending bits for DMA1 Stream3 */ + DMA1->LIFCR = DMA_Stream3_IT_MASK; + } + else if (DMAy_Streamx == DMA1_Stream4) + { + /* Reset interrupt pending bits for DMA1 Stream4 */ + DMA1->HIFCR = DMA_Stream4_IT_MASK; + } + else if (DMAy_Streamx == DMA1_Stream5) + { + /* Reset interrupt pending bits for DMA1 Stream5 */ + DMA1->HIFCR = DMA_Stream5_IT_MASK; + } + else if (DMAy_Streamx == DMA1_Stream6) + { + /* Reset interrupt pending bits for DMA1 Stream6 */ + DMA1->HIFCR = (uint32_t)DMA_Stream6_IT_MASK; + } + else if (DMAy_Streamx == DMA1_Stream7) + { + /* Reset interrupt pending bits for DMA1 Stream7 */ + DMA1->HIFCR = DMA_Stream7_IT_MASK; + } + else if (DMAy_Streamx == DMA2_Stream0) + { + /* Reset interrupt pending bits for DMA2 Stream0 */ + DMA2->LIFCR = DMA_Stream0_IT_MASK; + } + else if (DMAy_Streamx == DMA2_Stream1) + { + /* Reset interrupt pending bits for DMA2 Stream1 */ + DMA2->LIFCR = DMA_Stream1_IT_MASK; + } + else if (DMAy_Streamx == DMA2_Stream2) + { + /* Reset interrupt pending bits for DMA2 Stream2 */ + DMA2->LIFCR = DMA_Stream2_IT_MASK; + } + else if (DMAy_Streamx == DMA2_Stream3) + { + /* Reset interrupt pending bits for DMA2 Stream3 */ + DMA2->LIFCR = DMA_Stream3_IT_MASK; + } + else if (DMAy_Streamx == DMA2_Stream4) + { + /* Reset interrupt pending bits for DMA2 Stream4 */ + DMA2->HIFCR = DMA_Stream4_IT_MASK; + } + else if (DMAy_Streamx == DMA2_Stream5) + { + /* Reset interrupt pending bits for DMA2 Stream5 */ + DMA2->HIFCR = DMA_Stream5_IT_MASK; + } + else if (DMAy_Streamx == DMA2_Stream6) + { + /* Reset interrupt pending bits for DMA2 Stream6 */ + DMA2->HIFCR = DMA_Stream6_IT_MASK; + } + else + { + if (DMAy_Streamx == DMA2_Stream7) + { + /* Reset interrupt pending bits for DMA2 Stream7 */ + DMA2->HIFCR = DMA_Stream7_IT_MASK; + } + } +} + +/** + * @brief Initializes the DMAy Streamx according to the specified parameters in + * the DMA_InitStruct structure. + * @note Before calling this function, it is recommended to check that the Stream + * is actually disabled using the function DMA_GetCmdStatus(). + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ +void DMA_Init(DMA_Stream_TypeDef* DMAy_Streamx, DMA_InitTypeDef* DMA_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_CHANNEL(DMA_InitStruct->DMA_Channel)); + assert_param(IS_DMA_DIRECTION(DMA_InitStruct->DMA_DIR)); + assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); + assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); + assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); + assert_param(IS_DMA_FIFO_MODE_STATE(DMA_InitStruct->DMA_FIFOMode)); + assert_param(IS_DMA_FIFO_THRESHOLD(DMA_InitStruct->DMA_FIFOThreshold)); + assert_param(IS_DMA_MEMORY_BURST(DMA_InitStruct->DMA_MemoryBurst)); + assert_param(IS_DMA_PERIPHERAL_BURST(DMA_InitStruct->DMA_PeripheralBurst)); + + /*------------------------- DMAy Streamx CR Configuration ------------------*/ + /* Get the DMAy_Streamx CR value */ + tmpreg = DMAy_Streamx->CR; + + /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ + tmpreg &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \ + DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \ + DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \ + DMA_SxCR_DIR)); + + /* Configure DMAy Streamx: */ + /* Set CHSEL bits according to DMA_CHSEL value */ + /* Set DIR bits according to DMA_DIR value */ + /* Set PINC bit according to DMA_PeripheralInc value */ + /* Set MINC bit according to DMA_MemoryInc value */ + /* Set PSIZE bits according to DMA_PeripheralDataSize value */ + /* Set MSIZE bits according to DMA_MemoryDataSize value */ + /* Set CIRC bit according to DMA_Mode value */ + /* Set PL bits according to DMA_Priority value */ + /* Set MBURST bits according to DMA_MemoryBurst value */ + /* Set PBURST bits according to DMA_PeripheralBurst value */ + tmpreg |= DMA_InitStruct->DMA_Channel | DMA_InitStruct->DMA_DIR | + DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | + DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | + DMA_InitStruct->DMA_Mode | DMA_InitStruct->DMA_Priority | + DMA_InitStruct->DMA_MemoryBurst | DMA_InitStruct->DMA_PeripheralBurst; + + /* Write to DMAy Streamx CR register */ + DMAy_Streamx->CR = tmpreg; + + /*------------------------- DMAy Streamx FCR Configuration -----------------*/ + /* Get the DMAy_Streamx FCR value */ + tmpreg = DMAy_Streamx->FCR; + + /* Clear DMDIS and FTH bits */ + tmpreg &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH); + + /* Configure DMAy Streamx FIFO: + Set DMDIS bits according to DMA_FIFOMode value + Set FTH bits according to DMA_FIFOThreshold value */ + tmpreg |= DMA_InitStruct->DMA_FIFOMode | DMA_InitStruct->DMA_FIFOThreshold; + + /* Write to DMAy Streamx CR */ + DMAy_Streamx->FCR = tmpreg; + + /*------------------------- DMAy Streamx NDTR Configuration ----------------*/ + /* Write to DMAy Streamx NDTR register */ + DMAy_Streamx->NDTR = DMA_InitStruct->DMA_BufferSize; + + /*------------------------- DMAy Streamx PAR Configuration -----------------*/ + /* Write to DMAy Streamx PAR */ + DMAy_Streamx->PAR = DMA_InitStruct->DMA_PeripheralBaseAddr; + + /*------------------------- DMAy Streamx M0AR Configuration ----------------*/ + /* Write to DMAy Streamx M0AR */ + DMAy_Streamx->M0AR = DMA_InitStruct->DMA_Memory0BaseAddr; +} + +/** + * @brief Fills each DMA_InitStruct member with its default value. + * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) +{ + /*-------------- Reset DMA init structure parameters values ----------------*/ + /* Initialize the DMA_Channel member */ + DMA_InitStruct->DMA_Channel = 0; + + /* Initialize the DMA_PeripheralBaseAddr member */ + DMA_InitStruct->DMA_PeripheralBaseAddr = 0; + + /* Initialize the DMA_Memory0BaseAddr member */ + DMA_InitStruct->DMA_Memory0BaseAddr = 0; + + /* Initialize the DMA_DIR member */ + DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralToMemory; + + /* Initialize the DMA_BufferSize member */ + DMA_InitStruct->DMA_BufferSize = 0; + + /* Initialize the DMA_PeripheralInc member */ + DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; + + /* Initialize the DMA_MemoryInc member */ + DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; + + /* Initialize the DMA_PeripheralDataSize member */ + DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; + + /* Initialize the DMA_MemoryDataSize member */ + DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; + + /* Initialize the DMA_Mode member */ + DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; + + /* Initialize the DMA_Priority member */ + DMA_InitStruct->DMA_Priority = DMA_Priority_Low; + + /* Initialize the DMA_FIFOMode member */ + DMA_InitStruct->DMA_FIFOMode = DMA_FIFOMode_Disable; + + /* Initialize the DMA_FIFOThreshold member */ + DMA_InitStruct->DMA_FIFOThreshold = DMA_FIFOThreshold_1QuarterFull; + + /* Initialize the DMA_MemoryBurst member */ + DMA_InitStruct->DMA_MemoryBurst = DMA_MemoryBurst_Single; + + /* Initialize the DMA_PeripheralBurst member */ + DMA_InitStruct->DMA_PeripheralBurst = DMA_PeripheralBurst_Single; +} + +/** + * @brief Enables or disables the specified DMAy Streamx. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param NewState: new state of the DMAy Streamx. + * This parameter can be: ENABLE or DISABLE. + * + * @note This function may be used to perform Pause-Resume operation. When a + * transfer is ongoing, calling this function to disable the Stream will + * cause the transfer to be paused. All configuration registers and the + * number of remaining data will be preserved. When calling again this + * function to re-enable the Stream, the transfer will be resumed from + * the point where it was paused. + * + * @note After configuring the DMA Stream (DMA_Init() function) and enabling the + * stream, it is recommended to check (or wait until) the DMA Stream is + * effectively enabled. A Stream may remain disabled if a configuration + * parameter is wrong. + * After disabling a DMA Stream, it is also recommended to check (or wait + * until) the DMA Stream is effectively disabled. If a Stream is disabled + * while a data transfer is ongoing, the current data will be transferred + * and the Stream will be effectively disabled only after the transfer of + * this single data is finished. + * + * @retval None + */ +void DMA_Cmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DMAy Streamx by setting EN bit */ + DMAy_Streamx->CR |= (uint32_t)DMA_SxCR_EN; + } + else + { + /* Disable the selected DMAy Streamx by clearing EN bit */ + DMAy_Streamx->CR &= ~(uint32_t)DMA_SxCR_EN; + } +} + +/** + * @brief Configures, when the PINC (Peripheral Increment address mode) bit is + * set, if the peripheral address should be incremented with the data + * size (configured with PSIZE bits) or by a fixed offset equal to 4 + * (32-bit aligned addresses). + * + * @note This function has no effect if the Peripheral Increment mode is disabled. + * + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param DMA_Pincos: specifies the Peripheral increment offset size. + * This parameter can be one of the following values: + * @arg DMA_PINCOS_Psize: Peripheral address increment is done + * accordingly to PSIZE parameter. + * @arg DMA_PINCOS_WordAligned: Peripheral address increment offset is + * fixed to 4 (32-bit aligned addresses). + * @retval None + */ +void DMA_PeriphIncOffsetSizeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_Pincos) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_PINCOS_SIZE(DMA_Pincos)); + + /* Check the needed Peripheral increment offset */ + if(DMA_Pincos != DMA_PINCOS_Psize) + { + /* Configure DMA_SxCR_PINCOS bit with the input parameter */ + DMAy_Streamx->CR |= (uint32_t)DMA_SxCR_PINCOS; + } + else + { + /* Clear the PINCOS bit: Peripheral address incremented according to PSIZE */ + DMAy_Streamx->CR &= ~(uint32_t)DMA_SxCR_PINCOS; + } +} + +/** + * @brief Configures, when the DMAy Streamx is disabled, the flow controller for + * the next transactions (Peripheral or Memory). + * + * @note Before enabling this feature, check if the used peripheral supports + * the Flow Controller mode or not. + * + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param DMA_FlowCtrl: specifies the DMA flow controller. + * This parameter can be one of the following values: + * @arg DMA_FlowCtrl_Memory: DMAy_Streamx transactions flow controller is + * the DMA controller. + * @arg DMA_FlowCtrl_Peripheral: DMAy_Streamx transactions flow controller + * is the peripheral. + * @retval None + */ +void DMA_FlowControllerConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FlowCtrl) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_FLOW_CTRL(DMA_FlowCtrl)); + + /* Check the needed flow controller */ + if(DMA_FlowCtrl != DMA_FlowCtrl_Memory) + { + /* Configure DMA_SxCR_PFCTRL bit with the input parameter */ + DMAy_Streamx->CR |= (uint32_t)DMA_SxCR_PFCTRL; + } + else + { + /* Clear the PFCTRL bit: Memory is the flow controller */ + DMAy_Streamx->CR &= ~(uint32_t)DMA_SxCR_PFCTRL; + } +} +/** + * @} + */ + +/** @defgroup DMA_Group2 Data Counter functions + * @brief Data Counter functions + * +@verbatim + =============================================================================== + Data Counter functions + =============================================================================== + + This subsection provides function allowing to configure and read the buffer size + (number of data to be transferred). + + The DMA data counter can be written only when the DMA Stream is disabled + (ie. after transfer complete event). + + The following function can be used to write the Stream data counter value: + - void DMA_SetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx, uint16_t Counter); + +@note It is advised to use this function rather than DMA_Init() in situations where + only the Data buffer needs to be reloaded. + +@note If the Source and Destination Data Sizes are different, then the value written in + data counter, expressing the number of transfers, is relative to the number of + transfers from the Peripheral point of view. + ie. If Memory data size is Word, Peripheral data size is Half-Words, then the value + to be configured in the data counter is the number of Half-Words to be transferred + from/to the peripheral. + + The DMA data counter can be read to indicate the number of remaining transfers for + the relative DMA Stream. This counter is decremented at the end of each data + transfer and when the transfer is complete: + - If Normal mode is selected: the counter is set to 0. + - If Circular mode is selected: the counter is reloaded with the initial value + (configured before enabling the DMA Stream) + + The following function can be used to read the Stream data counter value: + - uint16_t DMA_GetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx); + +@endverbatim + * @{ + */ + +/** + * @brief Writes the number of data units to be transferred on the DMAy Streamx. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param Counter: Number of data units to be transferred (from 0 to 65535) + * Number of data items depends only on the Peripheral data format. + * + * @note If Peripheral data format is Bytes: number of data units is equal + * to total number of bytes to be transferred. + * + * @note If Peripheral data format is Half-Word: number of data units is + * equal to total number of bytes to be transferred / 2. + * + * @note If Peripheral data format is Word: number of data units is equal + * to total number of bytes to be transferred / 4. + * + * @note In Memory-to-Memory transfer mode, the memory buffer pointed by + * DMAy_SxPAR register is considered as Peripheral. + * + * @retval The number of remaining data units in the current DMAy Streamx transfer. + */ +void DMA_SetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx, uint16_t Counter) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + + /* Write the number of data units to be transferred */ + DMAy_Streamx->NDTR = (uint16_t)Counter; +} + +/** + * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @retval The number of remaining data units in the current DMAy Streamx transfer. + */ +uint16_t DMA_GetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + + /* Return the number of remaining data units for DMAy Streamx */ + return ((uint16_t)(DMAy_Streamx->NDTR)); +} +/** + * @} + */ + +/** @defgroup DMA_Group3 Double Buffer mode functions + * @brief Double Buffer mode functions + * +@verbatim + =============================================================================== + Double Buffer mode functions + =============================================================================== + + This subsection provides function allowing to configure and control the double + buffer mode parameters. + + The Double Buffer mode can be used only when Circular mode is enabled. + The Double Buffer mode cannot be used when transferring data from Memory to Memory. + + The Double Buffer mode allows to set two different Memory addresses from/to which + the DMA controller will access alternatively (after completing transfer to/from target + memory 0, it will start transfer to/from target memory 1). + This allows to reduce software overhead for double buffering and reduce the CPU + access time. + + Two functions must be called before calling the DMA_Init() function: + - void DMA_DoubleBufferModeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t Memory1BaseAddr, + uint32_t DMA_CurrentMemory); + - void DMA_DoubleBufferModeCmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState); + + DMA_DoubleBufferModeConfig() is called to configure the Memory 1 base address and the first + Memory target from/to which the transfer will start after enabling the DMA Stream. + Then DMA_DoubleBufferModeCmd() must be called to enable the Double Buffer mode (or disable + it when it should not be used). + + + Two functions can be called dynamically when the transfer is ongoing (or when the DMA Stream is + stopped) to modify on of the target Memories addresses or to check wich Memory target is currently + used: + - void DMA_MemoryTargetConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t MemoryBaseAddr, + uint32_t DMA_MemoryTarget); + - uint32_t DMA_GetCurrentMemoryTarget(DMA_Stream_TypeDef* DMAy_Streamx); + + DMA_MemoryTargetConfig() can be called to modify the base address of one of the two target Memories. + The Memory of which the base address will be modified must not be currently be used by the DMA Stream + (ie. if the DMA Stream is currently transferring from Memory 1 then you can only modify base address + of target Memory 0 and vice versa). + To check this condition, it is recommended to use the function DMA_GetCurrentMemoryTarget() which + returns the index of the Memory target currently in use by the DMA Stream. + +@endverbatim + * @{ + */ + +/** + * @brief Configures, when the DMAy Streamx is disabled, the double buffer mode + * and the current memory target. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param Memory1BaseAddr: the base address of the second buffer (Memory 1) + * @param DMA_CurrentMemory: specifies which memory will be first buffer for + * the transactions when the Stream will be enabled. + * This parameter can be one of the following values: + * @arg DMA_Memory_0: Memory 0 is the current buffer. + * @arg DMA_Memory_1: Memory 1 is the current buffer. + * + * @note Memory0BaseAddr is set by the DMA structure configuration in DMA_Init(). + * + * @retval None + */ +void DMA_DoubleBufferModeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t Memory1BaseAddr, + uint32_t DMA_CurrentMemory) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_CURRENT_MEM(DMA_CurrentMemory)); + + if (DMA_CurrentMemory != DMA_Memory_0) + { + /* Set Memory 1 as current memory address */ + DMAy_Streamx->CR |= (uint32_t)(DMA_SxCR_CT); + } + else + { + /* Set Memory 0 as current memory address */ + DMAy_Streamx->CR &= ~(uint32_t)(DMA_SxCR_CT); + } + + /* Write to DMAy Streamx M1AR */ + DMAy_Streamx->M1AR = Memory1BaseAddr; +} + +/** + * @brief Enables or disables the double buffer mode for the selected DMA stream. + * @note This function can be called only when the DMA Stream is disabled. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param NewState: new state of the DMAy Streamx double buffer mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_DoubleBufferModeCmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Configure the Double Buffer mode */ + if (NewState != DISABLE) + { + /* Enable the Double buffer mode */ + DMAy_Streamx->CR |= (uint32_t)DMA_SxCR_DBM; + } + else + { + /* Disable the Double buffer mode */ + DMAy_Streamx->CR &= ~(uint32_t)DMA_SxCR_DBM; + } +} + +/** + * @brief Configures the Memory address for the next buffer transfer in double + * buffer mode (for dynamic use). This function can be called when the + * DMA Stream is enabled and when the transfer is ongoing. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param MemoryBaseAddr: The base address of the target memory buffer + * @param DMA_MemoryTarget: Next memory target to be used. + * This parameter can be one of the following values: + * @arg DMA_Memory_0: To use the memory address 0 + * @arg DMA_Memory_1: To use the memory address 1 + * + * @note It is not allowed to modify the Base Address of a target Memory when + * this target is involved in the current transfer. ie. If the DMA Stream + * is currently transferring to/from Memory 1, then it not possible to + * modify Base address of Memory 1, but it is possible to modify Base + * address of Memory 0. + * To know which Memory is currently used, you can use the function + * DMA_GetCurrentMemoryTarget(). + * + * @retval None + */ +void DMA_MemoryTargetConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t MemoryBaseAddr, + uint32_t DMA_MemoryTarget) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_CURRENT_MEM(DMA_MemoryTarget)); + + /* Check the Memory target to be configured */ + if (DMA_MemoryTarget != DMA_Memory_0) + { + /* Write to DMAy Streamx M1AR */ + DMAy_Streamx->M1AR = MemoryBaseAddr; + } + else + { + /* Write to DMAy Streamx M0AR */ + DMAy_Streamx->M0AR = MemoryBaseAddr; + } +} + +/** + * @brief Returns the current memory target used by double buffer transfer. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @retval The memory target number: 0 for Memory0 or 1 for Memory1. + */ +uint32_t DMA_GetCurrentMemoryTarget(DMA_Stream_TypeDef* DMAy_Streamx) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + + /* Get the current memory target */ + if ((DMAy_Streamx->CR & DMA_SxCR_CT) != 0) + { + /* Current memory buffer used is Memory 1 */ + tmp = 1; + } + else + { + /* Current memory buffer used is Memory 0 */ + tmp = 0; + } + return tmp; +} +/** + * @} + */ + +/** @defgroup DMA_Group4 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + + This subsection provides functions allowing to + - Check the DMA enable status + - Check the FIFO status + - Configure the DMA Interrupts sources and check or clear the flags or pending bits status. + + 1. DMA Enable status: + After configuring the DMA Stream (DMA_Init() function) and enabling the stream, + it is recommended to check (or wait until) the DMA Stream is effectively enabled. + A Stream may remain disabled if a configuration parameter is wrong. + After disabling a DMA Stream, it is also recommended to check (or wait until) the DMA + Stream is effectively disabled. If a Stream is disabled while a data transfer is ongoing, + the current data will be transferred and the Stream will be effectively disabled only after + this data transfer completion. + To monitor this state it is possible to use the following function: + - FunctionalState DMA_GetCmdStatus(DMA_Stream_TypeDef* DMAy_Streamx); + + 2. FIFO Status: + It is possible to monitor the FIFO status when a transfer is ongoing using the following + function: + - uint32_t DMA_GetFIFOStatus(DMA_Stream_TypeDef* DMAy_Streamx); + + 3. DMA Interrupts and Flags: + The user should identify which mode will be used in his application to manage the + DMA controller events: Polling mode or Interrupt mode. + + Polling Mode + ============= + Each DMA stream can be managed through 4 event Flags: + (x : DMA Stream number ) + 1. DMA_FLAG_FEIFx : to indicate that a FIFO Mode Transfer Error event occurred. + 2. DMA_FLAG_DMEIFx : to indicate that a Direct Mode Transfer Error event occurred. + 3. DMA_FLAG_TEIFx : to indicate that a Transfer Error event occurred. + 4. DMA_FLAG_HTIFx : to indicate that a Half-Transfer Complete event occurred. + 5. DMA_FLAG_TCIFx : to indicate that a Transfer Complete event occurred . + + In this Mode it is advised to use the following functions: + - FlagStatus DMA_GetFlagStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG); + - void DMA_ClearFlag(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG); + + Interrupt Mode + =============== + Each DMA Stream can be managed through 4 Interrupts: + + Interrupt Source + ---------------- + 1. DMA_IT_FEIFx : specifies the interrupt source for the FIFO Mode Transfer Error event. + 2. DMA_IT_DMEIFx : specifies the interrupt source for the Direct Mode Transfer Error event. + 3. DMA_IT_TEIFx : specifies the interrupt source for the Transfer Error event. + 4. DMA_IT_HTIFx : specifies the interrupt source for the Half-Transfer Complete event. + 5. DMA_IT_TCIFx : specifies the interrupt source for the a Transfer Complete event. + + In this Mode it is advised to use the following functions: + - void DMA_ITConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT, FunctionalState NewState); + - ITStatus DMA_GetITStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT); + - void DMA_ClearITPendingBit(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT); + +@endverbatim + * @{ + */ + +/** + * @brief Returns the status of EN bit for the specified DMAy Streamx. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * + * @note After configuring the DMA Stream (DMA_Init() function) and enabling + * the stream, it is recommended to check (or wait until) the DMA Stream + * is effectively enabled. A Stream may remain disabled if a configuration + * parameter is wrong. + * After disabling a DMA Stream, it is also recommended to check (or wait + * until) the DMA Stream is effectively disabled. If a Stream is disabled + * while a data transfer is ongoing, the current data will be transferred + * and the Stream will be effectively disabled only after the transfer + * of this single data is finished. + * + * @retval Current state of the DMAy Streamx (ENABLE or DISABLE). + */ +FunctionalState DMA_GetCmdStatus(DMA_Stream_TypeDef* DMAy_Streamx) +{ + FunctionalState state = DISABLE; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + + if ((DMAy_Streamx->CR & (uint32_t)DMA_SxCR_EN) != 0) + { + /* The selected DMAy Streamx EN bit is set (DMA is still transferring) */ + state = ENABLE; + } + else + { + /* The selected DMAy Streamx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + state = DISABLE; + } + return state; +} + +/** + * @brief Returns the current DMAy Streamx FIFO filled level. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @retval The FIFO filling state. + * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full + * and not empty. + * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. + * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. + * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. + * - DMA_FIFOStatus_Empty: when FIFO is empty + * - DMA_FIFOStatus_Full: when FIFO is full + */ +uint32_t DMA_GetFIFOStatus(DMA_Stream_TypeDef* DMAy_Streamx) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + + /* Get the FIFO level bits */ + tmpreg = (uint32_t)((DMAy_Streamx->FCR & DMA_SxFCR_FS)); + + return tmpreg; +} + +/** + * @brief Checks whether the specified DMAy Streamx flag is set or not. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param DMA_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg DMA_FLAG_TCIFx: Streamx transfer complete flag + * @arg DMA_FLAG_HTIFx: Streamx half transfer complete flag + * @arg DMA_FLAG_TEIFx: Streamx transfer error flag + * @arg DMA_FLAG_DMEIFx: Streamx direct mode error flag + * @arg DMA_FLAG_FEIFx: Streamx FIFO error flag + * Where x can be 0 to 7 to select the DMA Stream. + * @retval The new state of DMA_FLAG (SET or RESET). + */ +FlagStatus DMA_GetFlagStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG) +{ + FlagStatus bitstatus = RESET; + DMA_TypeDef* DMAy; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_GET_FLAG(DMA_FLAG)); + + /* Determine the DMA to which belongs the stream */ + if (DMAy_Streamx < DMA2_Stream0) + { + /* DMAy_Streamx belongs to DMA1 */ + DMAy = DMA1; + } + else + { + /* DMAy_Streamx belongs to DMA2 */ + DMAy = DMA2; + } + + /* Check if the flag is in HISR or LISR */ + if ((DMA_FLAG & HIGH_ISR_MASK) != (uint32_t)RESET) + { + /* Get DMAy HISR register value */ + tmpreg = DMAy->HISR; + } + else + { + /* Get DMAy LISR register value */ + tmpreg = DMAy->LISR; + } + + /* Mask the reserved bits */ + tmpreg &= (uint32_t)RESERVED_MASK; + + /* Check the status of the specified DMA flag */ + if ((tmpreg & DMA_FLAG) != (uint32_t)RESET) + { + /* DMA_FLAG is set */ + bitstatus = SET; + } + else + { + /* DMA_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the DMA_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Streamx's pending flags. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param DMA_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCIFx: Streamx transfer complete flag + * @arg DMA_FLAG_HTIFx: Streamx half transfer complete flag + * @arg DMA_FLAG_TEIFx: Streamx transfer error flag + * @arg DMA_FLAG_DMEIFx: Streamx direct mode error flag + * @arg DMA_FLAG_FEIFx: Streamx FIFO error flag + * Where x can be 0 to 7 to select the DMA Stream. + * @retval None + */ +void DMA_ClearFlag(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG) +{ + DMA_TypeDef* DMAy; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_CLEAR_FLAG(DMA_FLAG)); + + /* Determine the DMA to which belongs the stream */ + if (DMAy_Streamx < DMA2_Stream0) + { + /* DMAy_Streamx belongs to DMA1 */ + DMAy = DMA1; + } + else + { + /* DMAy_Streamx belongs to DMA2 */ + DMAy = DMA2; + } + + /* Check if LIFCR or HIFCR register is targeted */ + if ((DMA_FLAG & HIGH_ISR_MASK) != (uint32_t)RESET) + { + /* Set DMAy HIFCR register clear flag bits */ + DMAy->HIFCR = (uint32_t)(DMA_FLAG & RESERVED_MASK); + } + else + { + /* Set DMAy LIFCR register clear flag bits */ + DMAy->LIFCR = (uint32_t)(DMA_FLAG & RESERVED_MASK); + } +} + +/** + * @brief Enables or disables the specified DMAy Streamx interrupts. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param DMA_IT: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @arg DMA_IT_FE: FIFO error interrupt mask + * @param NewState: new state of the specified DMA interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_ITConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_CONFIG_IT(DMA_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Check if the DMA_IT parameter contains a FIFO interrupt */ + if ((DMA_IT & DMA_IT_FE) != 0) + { + if (NewState != DISABLE) + { + /* Enable the selected DMA FIFO interrupts */ + DMAy_Streamx->FCR |= (uint32_t)DMA_IT_FE; + } + else + { + /* Disable the selected DMA FIFO interrupts */ + DMAy_Streamx->FCR &= ~(uint32_t)DMA_IT_FE; + } + } + + /* Check if the DMA_IT parameter contains a Transfer interrupt */ + if (DMA_IT != DMA_IT_FE) + { + if (NewState != DISABLE) + { + /* Enable the selected DMA transfer interrupts */ + DMAy_Streamx->CR |= (uint32_t)(DMA_IT & TRANSFER_IT_ENABLE_MASK); + } + else + { + /* Disable the selected DMA transfer interrupts */ + DMAy_Streamx->CR &= ~(uint32_t)(DMA_IT & TRANSFER_IT_ENABLE_MASK); + } + } +} + +/** + * @brief Checks whether the specified DMAy Streamx interrupt has occurred or not. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param DMA_IT: specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TCIFx: Streamx transfer complete interrupt + * @arg DMA_IT_HTIFx: Streamx half transfer complete interrupt + * @arg DMA_IT_TEIFx: Streamx transfer error interrupt + * @arg DMA_IT_DMEIFx: Streamx direct mode error interrupt + * @arg DMA_IT_FEIFx: Streamx FIFO error interrupt + * Where x can be 0 to 7 to select the DMA Stream. + * @retval The new state of DMA_IT (SET or RESET). + */ +ITStatus DMA_GetITStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT) +{ + ITStatus bitstatus = RESET; + DMA_TypeDef* DMAy; + uint32_t tmpreg = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_GET_IT(DMA_IT)); + + /* Determine the DMA to which belongs the stream */ + if (DMAy_Streamx < DMA2_Stream0) + { + /* DMAy_Streamx belongs to DMA1 */ + DMAy = DMA1; + } + else + { + /* DMAy_Streamx belongs to DMA2 */ + DMAy = DMA2; + } + + /* Check if the interrupt enable bit is in the CR or FCR register */ + if ((DMA_IT & TRANSFER_IT_MASK) != (uint32_t)RESET) + { + /* Get the interrupt enable position mask in CR register */ + tmpreg = (uint32_t)((DMA_IT >> 11) & TRANSFER_IT_ENABLE_MASK); + + /* Check the enable bit in CR register */ + enablestatus = (uint32_t)(DMAy_Streamx->CR & tmpreg); + } + else + { + /* Check the enable bit in FCR register */ + enablestatus = (uint32_t)(DMAy_Streamx->FCR & DMA_IT_FE); + } + + /* Check if the interrupt pending flag is in LISR or HISR */ + if ((DMA_IT & HIGH_ISR_MASK) != (uint32_t)RESET) + { + /* Get DMAy HISR register value */ + tmpreg = DMAy->HISR ; + } + else + { + /* Get DMAy LISR register value */ + tmpreg = DMAy->LISR ; + } + + /* mask all reserved bits */ + tmpreg &= (uint32_t)RESERVED_MASK; + + /* Check the status of the specified DMA interrupt */ + if (((tmpreg & DMA_IT) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) + { + /* DMA_IT is set */ + bitstatus = SET; + } + else + { + /* DMA_IT is reset */ + bitstatus = RESET; + } + + /* Return the DMA_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Streamx's interrupt pending bits. + * @param DMAy_Streamx: where y can be 1 or 2 to select the DMA and x can be 0 + * to 7 to select the DMA Stream. + * @param DMA_IT: specifies the DMA interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TCIFx: Streamx transfer complete interrupt + * @arg DMA_IT_HTIFx: Streamx half transfer complete interrupt + * @arg DMA_IT_TEIFx: Streamx transfer error interrupt + * @arg DMA_IT_DMEIFx: Streamx direct mode error interrupt + * @arg DMA_IT_FEIFx: Streamx FIFO error interrupt + * Where x can be 0 to 7 to select the DMA Stream. + * @retval None + */ +void DMA_ClearITPendingBit(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT) +{ + DMA_TypeDef* DMAy; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Streamx)); + assert_param(IS_DMA_CLEAR_IT(DMA_IT)); + + /* Determine the DMA to which belongs the stream */ + if (DMAy_Streamx < DMA2_Stream0) + { + /* DMAy_Streamx belongs to DMA1 */ + DMAy = DMA1; + } + else + { + /* DMAy_Streamx belongs to DMA2 */ + DMAy = DMA2; + } + + /* Check if LIFCR or HIFCR register is targeted */ + if ((DMA_IT & HIGH_ISR_MASK) != (uint32_t)RESET) + { + /* Set DMAy HIFCR register clear interrupt bits */ + DMAy->HIFCR = (uint32_t)(DMA_IT & RESERVED_MASK); + } + else + { + /* Set DMAy LIFCR register clear interrupt bits */ + DMAy->LIFCR = (uint32_t)(DMA_IT & RESERVED_MASK); + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.h new file mode 100644 index 00000000000..1d1c5a8ea0c --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_dma.h @@ -0,0 +1,603 @@ +/** + ****************************************************************************** + * @file stm32f4xx_dma.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the DMA firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_DMA_H +#define __STM32F4xx_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief DMA Init structure definition + */ + +typedef struct +{ + uint32_t DMA_Channel; /*!< Specifies the channel used for the specified stream. + This parameter can be a value of @ref DMA_channel */ + + uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Streamx. */ + + uint32_t DMA_Memory0BaseAddr; /*!< Specifies the memory 0 base address for DMAy Streamx. + This memory is the default memory used when double buffer mode is + not enabled. */ + + uint32_t DMA_DIR; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_data_transfer_direction */ + + uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Stream. + The data unit is equal to the configuration set in DMA_PeripheralDataSize + or DMA_MemoryDataSize members depending in the transfer direction. */ + + uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_peripheral_incremented_mode */ + + uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_memory_incremented_mode */ + + uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_peripheral_data_size */ + + uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_memory_data_size */ + + uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Streamx. + This parameter can be a value of @ref DMA_circular_normal_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Stream */ + + uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Streamx. + This parameter can be a value of @ref DMA_priority_level */ + + uint32_t DMA_FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified Stream. + This parameter can be a value of @ref DMA_fifo_direct_mode + @note The Direct mode (FIFO mode disabled) cannot be used if the + memory-to-memory data transfer is configured on the selected Stream */ + + uint32_t DMA_FIFOThreshold; /*!< Specifies the FIFO threshold level. + This parameter can be a value of @ref DMA_fifo_threshold_level */ + + uint32_t DMA_MemoryBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. + It specifies the amount of data to be transferred in a single non interruptable + transaction. This parameter can be a value of @ref DMA_memory_burst + @note The burst mode is possible only if the address Increment mode is enabled. */ + + uint32_t DMA_PeripheralBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. + It specifies the amount of data to be transferred in a single non interruptable + transaction. This parameter can be a value of @ref DMA_peripheral_burst + @note The burst mode is possible only if the address Increment mode is enabled. */ +}DMA_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants + * @{ + */ + +#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Stream0) || \ + ((PERIPH) == DMA1_Stream1) || \ + ((PERIPH) == DMA1_Stream2) || \ + ((PERIPH) == DMA1_Stream3) || \ + ((PERIPH) == DMA1_Stream4) || \ + ((PERIPH) == DMA1_Stream5) || \ + ((PERIPH) == DMA1_Stream6) || \ + ((PERIPH) == DMA1_Stream7) || \ + ((PERIPH) == DMA2_Stream0) || \ + ((PERIPH) == DMA2_Stream1) || \ + ((PERIPH) == DMA2_Stream2) || \ + ((PERIPH) == DMA2_Stream3) || \ + ((PERIPH) == DMA2_Stream4) || \ + ((PERIPH) == DMA2_Stream5) || \ + ((PERIPH) == DMA2_Stream6) || \ + ((PERIPH) == DMA2_Stream7)) + +#define IS_DMA_ALL_CONTROLLER(CONTROLLER) (((CONTROLLER) == DMA1) || \ + ((CONTROLLER) == DMA2)) + +/** @defgroup DMA_channel + * @{ + */ +#define DMA_Channel_0 ((uint32_t)0x00000000) +#define DMA_Channel_1 ((uint32_t)0x02000000) +#define DMA_Channel_2 ((uint32_t)0x04000000) +#define DMA_Channel_3 ((uint32_t)0x06000000) +#define DMA_Channel_4 ((uint32_t)0x08000000) +#define DMA_Channel_5 ((uint32_t)0x0A000000) +#define DMA_Channel_6 ((uint32_t)0x0C000000) +#define DMA_Channel_7 ((uint32_t)0x0E000000) + +#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_Channel_0) || \ + ((CHANNEL) == DMA_Channel_1) || \ + ((CHANNEL) == DMA_Channel_2) || \ + ((CHANNEL) == DMA_Channel_3) || \ + ((CHANNEL) == DMA_Channel_4) || \ + ((CHANNEL) == DMA_Channel_5) || \ + ((CHANNEL) == DMA_Channel_6) || \ + ((CHANNEL) == DMA_Channel_7)) +/** + * @} + */ + + +/** @defgroup DMA_data_transfer_direction + * @{ + */ +#define DMA_DIR_PeripheralToMemory ((uint32_t)0x00000000) +#define DMA_DIR_MemoryToPeripheral ((uint32_t)0x00000040) +#define DMA_DIR_MemoryToMemory ((uint32_t)0x00000080) + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_DIR_PeripheralToMemory ) || \ + ((DIRECTION) == DMA_DIR_MemoryToPeripheral) || \ + ((DIRECTION) == DMA_DIR_MemoryToMemory)) +/** + * @} + */ + + +/** @defgroup DMA_data_buffer_size + * @{ + */ +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) +/** + * @} + */ + + +/** @defgroup DMA_peripheral_incremented_mode + * @{ + */ +#define DMA_PeripheralInc_Enable ((uint32_t)0x00000200) +#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ + ((STATE) == DMA_PeripheralInc_Disable)) +/** + * @} + */ + + +/** @defgroup DMA_memory_incremented_mode + * @{ + */ +#define DMA_MemoryInc_Enable ((uint32_t)0x00000400) +#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ + ((STATE) == DMA_MemoryInc_Disable)) +/** + * @} + */ + + +/** @defgroup DMA_peripheral_data_size + * @{ + */ +#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) +#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000800) +#define DMA_PeripheralDataSize_Word ((uint32_t)0x00001000) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ + ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ + ((SIZE) == DMA_PeripheralDataSize_Word)) +/** + * @} + */ + + +/** @defgroup DMA_memory_data_size + * @{ + */ +#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) +#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00002000) +#define DMA_MemoryDataSize_Word ((uint32_t)0x00004000) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ + ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ + ((SIZE) == DMA_MemoryDataSize_Word )) +/** + * @} + */ + + +/** @defgroup DMA_circular_normal_mode + * @{ + */ +#define DMA_Mode_Normal ((uint32_t)0x00000000) +#define DMA_Mode_Circular ((uint32_t)0x00000100) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Normal ) || \ + ((MODE) == DMA_Mode_Circular)) +/** + * @} + */ + + +/** @defgroup DMA_priority_level + * @{ + */ +#define DMA_Priority_Low ((uint32_t)0x00000000) +#define DMA_Priority_Medium ((uint32_t)0x00010000) +#define DMA_Priority_High ((uint32_t)0x00020000) +#define DMA_Priority_VeryHigh ((uint32_t)0x00030000) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_Low ) || \ + ((PRIORITY) == DMA_Priority_Medium) || \ + ((PRIORITY) == DMA_Priority_High) || \ + ((PRIORITY) == DMA_Priority_VeryHigh)) +/** + * @} + */ + + +/** @defgroup DMA_fifo_direct_mode + * @{ + */ +#define DMA_FIFOMode_Disable ((uint32_t)0x00000000) +#define DMA_FIFOMode_Enable ((uint32_t)0x00000004) + +#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMode_Disable ) || \ + ((STATE) == DMA_FIFOMode_Enable)) +/** + * @} + */ + + +/** @defgroup DMA_fifo_threshold_level + * @{ + */ +#define DMA_FIFOThreshold_1QuarterFull ((uint32_t)0x00000000) +#define DMA_FIFOThreshold_HalfFull ((uint32_t)0x00000001) +#define DMA_FIFOThreshold_3QuartersFull ((uint32_t)0x00000002) +#define DMA_FIFOThreshold_Full ((uint32_t)0x00000003) + +#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFOThreshold_1QuarterFull ) || \ + ((THRESHOLD) == DMA_FIFOThreshold_HalfFull) || \ + ((THRESHOLD) == DMA_FIFOThreshold_3QuartersFull) || \ + ((THRESHOLD) == DMA_FIFOThreshold_Full)) +/** + * @} + */ + + +/** @defgroup DMA_memory_burst + * @{ + */ +#define DMA_MemoryBurst_Single ((uint32_t)0x00000000) +#define DMA_MemoryBurst_INC4 ((uint32_t)0x00800000) +#define DMA_MemoryBurst_INC8 ((uint32_t)0x01000000) +#define DMA_MemoryBurst_INC16 ((uint32_t)0x01800000) + +#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MemoryBurst_Single) || \ + ((BURST) == DMA_MemoryBurst_INC4) || \ + ((BURST) == DMA_MemoryBurst_INC8) || \ + ((BURST) == DMA_MemoryBurst_INC16)) +/** + * @} + */ + + +/** @defgroup DMA_peripheral_burst + * @{ + */ +#define DMA_PeripheralBurst_Single ((uint32_t)0x00000000) +#define DMA_PeripheralBurst_INC4 ((uint32_t)0x00200000) +#define DMA_PeripheralBurst_INC8 ((uint32_t)0x00400000) +#define DMA_PeripheralBurst_INC16 ((uint32_t)0x00600000) + +#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PeripheralBurst_Single) || \ + ((BURST) == DMA_PeripheralBurst_INC4) || \ + ((BURST) == DMA_PeripheralBurst_INC8) || \ + ((BURST) == DMA_PeripheralBurst_INC16)) +/** + * @} + */ + + +/** @defgroup DMA_fifo_status_level + * @{ + */ +#define DMA_FIFOStatus_Less1QuarterFull ((uint32_t)0x00000000 << 3) +#define DMA_FIFOStatus_1QuarterFull ((uint32_t)0x00000001 << 3) +#define DMA_FIFOStatus_HalfFull ((uint32_t)0x00000002 << 3) +#define DMA_FIFOStatus_3QuartersFull ((uint32_t)0x00000003 << 3) +#define DMA_FIFOStatus_Empty ((uint32_t)0x00000004 << 3) +#define DMA_FIFOStatus_Full ((uint32_t)0x00000005 << 3) + +#define IS_DMA_FIFO_STATUS(STATUS) (((STATUS) == DMA_FIFOStatus_Less1QuarterFull ) || \ + ((STATUS) == DMA_FIFOStatus_HalfFull) || \ + ((STATUS) == DMA_FIFOStatus_1QuarterFull) || \ + ((STATUS) == DMA_FIFOStatus_3QuartersFull) || \ + ((STATUS) == DMA_FIFOStatus_Full) || \ + ((STATUS) == DMA_FIFOStatus_Empty)) +/** + * @} + */ + +/** @defgroup DMA_flags_definition + * @{ + */ +#define DMA_FLAG_FEIF0 ((uint32_t)0x10800001) +#define DMA_FLAG_DMEIF0 ((uint32_t)0x10800004) +#define DMA_FLAG_TEIF0 ((uint32_t)0x10000008) +#define DMA_FLAG_HTIF0 ((uint32_t)0x10000010) +#define DMA_FLAG_TCIF0 ((uint32_t)0x10000020) +#define DMA_FLAG_FEIF1 ((uint32_t)0x10000040) +#define DMA_FLAG_DMEIF1 ((uint32_t)0x10000100) +#define DMA_FLAG_TEIF1 ((uint32_t)0x10000200) +#define DMA_FLAG_HTIF1 ((uint32_t)0x10000400) +#define DMA_FLAG_TCIF1 ((uint32_t)0x10000800) +#define DMA_FLAG_FEIF2 ((uint32_t)0x10010000) +#define DMA_FLAG_DMEIF2 ((uint32_t)0x10040000) +#define DMA_FLAG_TEIF2 ((uint32_t)0x10080000) +#define DMA_FLAG_HTIF2 ((uint32_t)0x10100000) +#define DMA_FLAG_TCIF2 ((uint32_t)0x10200000) +#define DMA_FLAG_FEIF3 ((uint32_t)0x10400000) +#define DMA_FLAG_DMEIF3 ((uint32_t)0x11000000) +#define DMA_FLAG_TEIF3 ((uint32_t)0x12000000) +#define DMA_FLAG_HTIF3 ((uint32_t)0x14000000) +#define DMA_FLAG_TCIF3 ((uint32_t)0x18000000) +#define DMA_FLAG_FEIF4 ((uint32_t)0x20000001) +#define DMA_FLAG_DMEIF4 ((uint32_t)0x20000004) +#define DMA_FLAG_TEIF4 ((uint32_t)0x20000008) +#define DMA_FLAG_HTIF4 ((uint32_t)0x20000010) +#define DMA_FLAG_TCIF4 ((uint32_t)0x20000020) +#define DMA_FLAG_FEIF5 ((uint32_t)0x20000040) +#define DMA_FLAG_DMEIF5 ((uint32_t)0x20000100) +#define DMA_FLAG_TEIF5 ((uint32_t)0x20000200) +#define DMA_FLAG_HTIF5 ((uint32_t)0x20000400) +#define DMA_FLAG_TCIF5 ((uint32_t)0x20000800) +#define DMA_FLAG_FEIF6 ((uint32_t)0x20010000) +#define DMA_FLAG_DMEIF6 ((uint32_t)0x20040000) +#define DMA_FLAG_TEIF6 ((uint32_t)0x20080000) +#define DMA_FLAG_HTIF6 ((uint32_t)0x20100000) +#define DMA_FLAG_TCIF6 ((uint32_t)0x20200000) +#define DMA_FLAG_FEIF7 ((uint32_t)0x20400000) +#define DMA_FLAG_DMEIF7 ((uint32_t)0x21000000) +#define DMA_FLAG_TEIF7 ((uint32_t)0x22000000) +#define DMA_FLAG_HTIF7 ((uint32_t)0x24000000) +#define DMA_FLAG_TCIF7 ((uint32_t)0x28000000) + +#define IS_DMA_CLEAR_FLAG(FLAG) ((((FLAG) & 0x30000000) != 0x30000000) && (((FLAG) & 0x30000000) != 0) && \ + (((FLAG) & 0xC082F082) == 0x00) && ((FLAG) != 0x00)) + +#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA_FLAG_TCIF0) || ((FLAG) == DMA_FLAG_HTIF0) || \ + ((FLAG) == DMA_FLAG_TEIF0) || ((FLAG) == DMA_FLAG_DMEIF0) || \ + ((FLAG) == DMA_FLAG_FEIF0) || ((FLAG) == DMA_FLAG_TCIF1) || \ + ((FLAG) == DMA_FLAG_HTIF1) || ((FLAG) == DMA_FLAG_TEIF1) || \ + ((FLAG) == DMA_FLAG_DMEIF1) || ((FLAG) == DMA_FLAG_FEIF1) || \ + ((FLAG) == DMA_FLAG_TCIF2) || ((FLAG) == DMA_FLAG_HTIF2) || \ + ((FLAG) == DMA_FLAG_TEIF2) || ((FLAG) == DMA_FLAG_DMEIF2) || \ + ((FLAG) == DMA_FLAG_FEIF2) || ((FLAG) == DMA_FLAG_TCIF3) || \ + ((FLAG) == DMA_FLAG_HTIF3) || ((FLAG) == DMA_FLAG_TEIF3) || \ + ((FLAG) == DMA_FLAG_DMEIF3) || ((FLAG) == DMA_FLAG_FEIF3) || \ + ((FLAG) == DMA_FLAG_TCIF4) || ((FLAG) == DMA_FLAG_HTIF4) || \ + ((FLAG) == DMA_FLAG_TEIF4) || ((FLAG) == DMA_FLAG_DMEIF4) || \ + ((FLAG) == DMA_FLAG_FEIF4) || ((FLAG) == DMA_FLAG_TCIF5) || \ + ((FLAG) == DMA_FLAG_HTIF5) || ((FLAG) == DMA_FLAG_TEIF5) || \ + ((FLAG) == DMA_FLAG_DMEIF5) || ((FLAG) == DMA_FLAG_FEIF5) || \ + ((FLAG) == DMA_FLAG_TCIF6) || ((FLAG) == DMA_FLAG_HTIF6) || \ + ((FLAG) == DMA_FLAG_TEIF6) || ((FLAG) == DMA_FLAG_DMEIF6) || \ + ((FLAG) == DMA_FLAG_FEIF6) || ((FLAG) == DMA_FLAG_TCIF7) || \ + ((FLAG) == DMA_FLAG_HTIF7) || ((FLAG) == DMA_FLAG_TEIF7) || \ + ((FLAG) == DMA_FLAG_DMEIF7) || ((FLAG) == DMA_FLAG_FEIF7)) +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions + * @{ + */ +#define DMA_IT_TC ((uint32_t)0x00000010) +#define DMA_IT_HT ((uint32_t)0x00000008) +#define DMA_IT_TE ((uint32_t)0x00000004) +#define DMA_IT_DME ((uint32_t)0x00000002) +#define DMA_IT_FE ((uint32_t)0x00000080) + +#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFF61) == 0x00) && ((IT) != 0x00)) +/** + * @} + */ + + +/** @defgroup DMA_interrupts_definitions + * @{ + */ +#define DMA_IT_FEIF0 ((uint32_t)0x90000001) +#define DMA_IT_DMEIF0 ((uint32_t)0x10001004) +#define DMA_IT_TEIF0 ((uint32_t)0x10002008) +#define DMA_IT_HTIF0 ((uint32_t)0x10004010) +#define DMA_IT_TCIF0 ((uint32_t)0x10008020) +#define DMA_IT_FEIF1 ((uint32_t)0x90000040) +#define DMA_IT_DMEIF1 ((uint32_t)0x10001100) +#define DMA_IT_TEIF1 ((uint32_t)0x10002200) +#define DMA_IT_HTIF1 ((uint32_t)0x10004400) +#define DMA_IT_TCIF1 ((uint32_t)0x10008800) +#define DMA_IT_FEIF2 ((uint32_t)0x90010000) +#define DMA_IT_DMEIF2 ((uint32_t)0x10041000) +#define DMA_IT_TEIF2 ((uint32_t)0x10082000) +#define DMA_IT_HTIF2 ((uint32_t)0x10104000) +#define DMA_IT_TCIF2 ((uint32_t)0x10208000) +#define DMA_IT_FEIF3 ((uint32_t)0x90400000) +#define DMA_IT_DMEIF3 ((uint32_t)0x11001000) +#define DMA_IT_TEIF3 ((uint32_t)0x12002000) +#define DMA_IT_HTIF3 ((uint32_t)0x14004000) +#define DMA_IT_TCIF3 ((uint32_t)0x18008000) +#define DMA_IT_FEIF4 ((uint32_t)0xA0000001) +#define DMA_IT_DMEIF4 ((uint32_t)0x20001004) +#define DMA_IT_TEIF4 ((uint32_t)0x20002008) +#define DMA_IT_HTIF4 ((uint32_t)0x20004010) +#define DMA_IT_TCIF4 ((uint32_t)0x20008020) +#define DMA_IT_FEIF5 ((uint32_t)0xA0000040) +#define DMA_IT_DMEIF5 ((uint32_t)0x20001100) +#define DMA_IT_TEIF5 ((uint32_t)0x20002200) +#define DMA_IT_HTIF5 ((uint32_t)0x20004400) +#define DMA_IT_TCIF5 ((uint32_t)0x20008800) +#define DMA_IT_FEIF6 ((uint32_t)0xA0010000) +#define DMA_IT_DMEIF6 ((uint32_t)0x20041000) +#define DMA_IT_TEIF6 ((uint32_t)0x20082000) +#define DMA_IT_HTIF6 ((uint32_t)0x20104000) +#define DMA_IT_TCIF6 ((uint32_t)0x20208000) +#define DMA_IT_FEIF7 ((uint32_t)0xA0400000) +#define DMA_IT_DMEIF7 ((uint32_t)0x21001000) +#define DMA_IT_TEIF7 ((uint32_t)0x22002000) +#define DMA_IT_HTIF7 ((uint32_t)0x24004000) +#define DMA_IT_TCIF7 ((uint32_t)0x28008000) + +#define IS_DMA_CLEAR_IT(IT) ((((IT) & 0x30000000) != 0x30000000) && \ + (((IT) & 0x30000000) != 0) && ((IT) != 0x00) && \ + (((IT) & 0x40820082) == 0x00)) + +#define IS_DMA_GET_IT(IT) (((IT) == DMA_IT_TCIF0) || ((IT) == DMA_IT_HTIF0) || \ + ((IT) == DMA_IT_TEIF0) || ((IT) == DMA_IT_DMEIF0) || \ + ((IT) == DMA_IT_FEIF0) || ((IT) == DMA_IT_TCIF1) || \ + ((IT) == DMA_IT_HTIF1) || ((IT) == DMA_IT_TEIF1) || \ + ((IT) == DMA_IT_DMEIF1)|| ((IT) == DMA_IT_FEIF1) || \ + ((IT) == DMA_IT_TCIF2) || ((IT) == DMA_IT_HTIF2) || \ + ((IT) == DMA_IT_TEIF2) || ((IT) == DMA_IT_DMEIF2) || \ + ((IT) == DMA_IT_FEIF2) || ((IT) == DMA_IT_TCIF3) || \ + ((IT) == DMA_IT_HTIF3) || ((IT) == DMA_IT_TEIF3) || \ + ((IT) == DMA_IT_DMEIF3)|| ((IT) == DMA_IT_FEIF3) || \ + ((IT) == DMA_IT_TCIF4) || ((IT) == DMA_IT_HTIF4) || \ + ((IT) == DMA_IT_TEIF4) || ((IT) == DMA_IT_DMEIF4) || \ + ((IT) == DMA_IT_FEIF4) || ((IT) == DMA_IT_TCIF5) || \ + ((IT) == DMA_IT_HTIF5) || ((IT) == DMA_IT_TEIF5) || \ + ((IT) == DMA_IT_DMEIF5)|| ((IT) == DMA_IT_FEIF5) || \ + ((IT) == DMA_IT_TCIF6) || ((IT) == DMA_IT_HTIF6) || \ + ((IT) == DMA_IT_TEIF6) || ((IT) == DMA_IT_DMEIF6) || \ + ((IT) == DMA_IT_FEIF6) || ((IT) == DMA_IT_TCIF7) || \ + ((IT) == DMA_IT_HTIF7) || ((IT) == DMA_IT_TEIF7) || \ + ((IT) == DMA_IT_DMEIF7)|| ((IT) == DMA_IT_FEIF7)) +/** + * @} + */ + + +/** @defgroup DMA_peripheral_increment_offset + * @{ + */ +#define DMA_PINCOS_Psize ((uint32_t)0x00000000) +#define DMA_PINCOS_WordAligned ((uint32_t)0x00008000) + +#define IS_DMA_PINCOS_SIZE(SIZE) (((SIZE) == DMA_PINCOS_Psize) || \ + ((SIZE) == DMA_PINCOS_WordAligned)) +/** + * @} + */ + + +/** @defgroup DMA_flow_controller_definitions + * @{ + */ +#define DMA_FlowCtrl_Memory ((uint32_t)0x00000000) +#define DMA_FlowCtrl_Peripheral ((uint32_t)0x00000020) + +#define IS_DMA_FLOW_CTRL(CTRL) (((CTRL) == DMA_FlowCtrl_Memory) || \ + ((CTRL) == DMA_FlowCtrl_Peripheral)) +/** + * @} + */ + + +/** @defgroup DMA_memory_targets_definitions + * @{ + */ +#define DMA_Memory_0 ((uint32_t)0x00000000) +#define DMA_Memory_1 ((uint32_t)0x00080000) + +#define IS_DMA_CURRENT_MEM(MEM) (((MEM) == DMA_Memory_0) || ((MEM) == DMA_Memory_1)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the DMA configuration to the default reset state *****/ +void DMA_DeInit(DMA_Stream_TypeDef* DMAy_Streamx); + +/* Initialization and Configuration functions *********************************/ +void DMA_Init(DMA_Stream_TypeDef* DMAy_Streamx, DMA_InitTypeDef* DMA_InitStruct); +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); +void DMA_Cmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState); + +/* Optional Configuration functions *******************************************/ +void DMA_PeriphIncOffsetSizeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_Pincos); +void DMA_FlowControllerConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FlowCtrl); + +/* Data Counter functions *****************************************************/ +void DMA_SetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx, uint16_t Counter); +uint16_t DMA_GetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx); + +/* Double Buffer mode functions ***********************************************/ +void DMA_DoubleBufferModeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t Memory1BaseAddr, + uint32_t DMA_CurrentMemory); +void DMA_DoubleBufferModeCmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState); +void DMA_MemoryTargetConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t MemoryBaseAddr, + uint32_t DMA_MemoryTarget); +uint32_t DMA_GetCurrentMemoryTarget(DMA_Stream_TypeDef* DMAy_Streamx); + +/* Interrupts and flags management functions **********************************/ +FunctionalState DMA_GetCmdStatus(DMA_Stream_TypeDef* DMAy_Streamx); +uint32_t DMA_GetFIFOStatus(DMA_Stream_TypeDef* DMAy_Streamx); +FlagStatus DMA_GetFlagStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG); +void DMA_ClearFlag(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG); +void DMA_ITConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT, FunctionalState NewState); +ITStatus DMA_GetITStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT); +void DMA_ClearITPendingBit(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_DMA_H */ + +/** + * @} + */ + +/** + * @} + */ + + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_exti.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_exti.c new file mode 100644 index 00000000000..6022753f5a7 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_exti.c @@ -0,0 +1,307 @@ +/** + ****************************************************************************** + * @file stm32f4xx_exti.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the EXTI peripheral: + * - Initialization and Configuration + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * EXTI features + * =================================================================== + * + * External interrupt/event lines are mapped as following: + * 1- All available GPIO pins are connected to the 16 external + * interrupt/event lines from EXTI0 to EXTI15. + * 2- EXTI line 16 is connected to the PVD Output + * 3- EXTI line 17 is connected to the RTC Alarm event + * 4- EXTI line 18 is connected to the USB OTG FS Wakeup from suspend event + * 5- EXTI line 19 is connected to the Ethernet Wakeup event + * 6- EXTI line 20 is connected to the USB OTG HS (configured in FS) Wakeup event + * 7- EXTI line 21 is connected to the RTC Tamper and Time Stamp events + * 8- EXTI line 22 is connected to the RTC Wakeup event + * + * =================================================================== + * How to use this driver + * =================================================================== + * + * In order to use an I/O pin as an external interrupt source, follow + * steps below: + * 1- Configure the I/O in input mode using GPIO_Init() + * 2- Select the input source pin for the EXTI line using SYSCFG_EXTILineConfig() + * 3- Select the mode(interrupt, event) and configure the trigger + * selection (Rising, falling or both) using EXTI_Init() + * 4- Configure NVIC IRQ channel mapped to the EXTI line using NVIC_Init() + * + * @note SYSCFG APB clock must be enabled to get write access to SYSCFG_EXTICRx + * registers using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_exti.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup EXTI + * @brief EXTI driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup EXTI_Private_Functions + * @{ + */ + +/** @defgroup EXTI_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the EXTI peripheral registers to their default reset values. + * @param None + * @retval None + */ +void EXTI_DeInit(void) +{ + EXTI->IMR = 0x00000000; + EXTI->EMR = 0x00000000; + EXTI->RTSR = 0x00000000; + EXTI->FTSR = 0x00000000; + EXTI->PR = 0x007FFFFF; +} + +/** + * @brief Initializes the EXTI peripheral according to the specified + * parameters in the EXTI_InitStruct. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure + * that contains the configuration information for the EXTI peripheral. + * @retval None + */ +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); + assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); + assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); + assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); + + tmp = (uint32_t)EXTI_BASE; + + if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) + { + /* Clear EXTI line configuration */ + EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; + + tmp += EXTI_InitStruct->EXTI_Mode; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; + + /* Select the trigger for the selected external interrupts */ + if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) + { + /* Rising Falling edge */ + EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; + EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; + } + else + { + tmp = (uint32_t)EXTI_BASE; + tmp += EXTI_InitStruct->EXTI_Trigger; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + } + } + else + { + tmp += EXTI_InitStruct->EXTI_Mode; + + /* Disable the selected external lines */ + *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line; + } +} + +/** + * @brief Fills each EXTI_InitStruct member with its reset value. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) +{ + EXTI_InitStruct->EXTI_Line = EXTI_LINENONE; + EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; + EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; + EXTI_InitStruct->EXTI_LineCmd = DISABLE; +} + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param EXTI_Line: specifies the EXTI line on which the software interrupt + * will be generated. + * This parameter can be any combination of EXTI_Linex where x can be (0..22) + * @retval None + */ +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->SWIER |= EXTI_Line; +} + +/** + * @} + */ + +/** @defgroup EXTI_Group2 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param EXTI_Line: specifies the EXTI line flag to check. + * This parameter can be EXTI_Linex where x can be(0..22) + * @retval The new state of EXTI_Line (SET or RESET). + */ +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending flags. + * @param EXTI_Line: specifies the EXTI lines flags to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..22) + * @retval None + */ +void EXTI_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param EXTI_Line: specifies the EXTI line to check. + * This parameter can be EXTI_Linex where x can be(0..22) + * @retval The new state of EXTI_Line (SET or RESET). + */ +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + enablestatus = EXTI->IMR & EXTI_Line; + if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending bits. + * @param EXTI_Line: specifies the EXTI lines to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..22) + * @retval None + */ +void EXTI_ClearITPendingBit(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_exti.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_exti.h new file mode 100644 index 00000000000..bda295c4242 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_exti.h @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file stm32f4xx_exti.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the EXTI firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_EXTI_H +#define __STM32F4xx_EXTI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief EXTI mode enumeration + */ + +typedef enum +{ + EXTI_Mode_Interrupt = 0x00, + EXTI_Mode_Event = 0x04 +}EXTIMode_TypeDef; + +#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) + +/** + * @brief EXTI Trigger enumeration + */ + +typedef enum +{ + EXTI_Trigger_Rising = 0x08, + EXTI_Trigger_Falling = 0x0C, + EXTI_Trigger_Rising_Falling = 0x10 +}EXTITrigger_TypeDef; + +#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ + ((TRIGGER) == EXTI_Trigger_Falling) || \ + ((TRIGGER) == EXTI_Trigger_Rising_Falling)) +/** + * @brief EXTI Init Structure definition + */ + +typedef struct +{ + uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled. + This parameter can be any combination value of @ref EXTI_Lines */ + + EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTITrigger_TypeDef */ + + FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ +}EXTI_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Constants + * @{ + */ + +/** @defgroup EXTI_Lines + * @{ + */ + +#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */ +#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */ +#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */ +#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */ +#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */ +#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */ +#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */ +#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */ +#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */ +#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */ +#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */ +#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */ +#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */ +#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */ +#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */ +#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */ +#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */ +#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */ +#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ +#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ +#define EXTI_Line20 ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ +#define EXTI_Line21 ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ +#define EXTI_Line22 ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to the RTC Wakeup event */ + +#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFF800000) == 0x00) && ((LINE) != (uint16_t)0x00)) + +#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ + ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ + ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ + ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ + ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ + ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ + ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ + ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ + ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ + ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19) || \ + ((LINE) == EXTI_Line20) || ((LINE) == EXTI_Line21) ||\ + ((LINE) == EXTI_Line22)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the EXTI configuration to the default reset state *****/ +void EXTI_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); + +/* Interrupts and flags management functions **********************************/ +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); +void EXTI_ClearFlag(uint32_t EXTI_Line); +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); +void EXTI_ClearITPendingBit(uint32_t EXTI_Line); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_EXTI_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_flash.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_flash.c new file mode 100644 index 00000000000..24d50675fbf --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_flash.c @@ -0,0 +1,1057 @@ +/** + ****************************************************************************** + * @file stm32f4xx_flash.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the FLASH peripheral: + * - FLASH Interface configuration + * - FLASH Memory Programming + * - Option Bytes Programming + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * + * This driver provides functions to configure and program the FLASH + * memory of all STM32F4xx devices. + * These functions are split in 4 groups: + * + * 1. FLASH Interface configuration functions: this group includes the + * management of the following features: + * - Set the latency + * - Enable/Disable the prefetch buffer + * - Enable/Disable the Instruction cache and the Data cache + * - Reset the Instruction cache and the Data cache + * + * 2. FLASH Memory Programming functions: this group includes all needed + * functions to erase and program the main memory: + * - Lock and Unlock the FLASH interface + * - Erase function: Erase sector, erase all sectors + * - Program functions: byte, half word, word and double word + * + * 3. Option Bytes Programming functions: this group includes all needed + * functions to manage the Option Bytes: + * - Set/Reset the write protection + * - Set the Read protection Level + * - Set the BOR level + * - Program the user Option Bytes + * - Launch the Option Bytes loader + * + * 4. Interrupts and flags management functions: this group + * includes all needed functions to: + * - Enable/Disable the FLASH interrupt sources + * - Get flags status + * - Clear flags + * - Get FLASH operation status + * - Wait for last FLASH operation + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_flash.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup FLASH + * @brief FLASH driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define SECTOR_MASK ((uint32_t)0xFFFFFF07) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup FLASH_Private_Functions + * @{ + */ + +/** @defgroup FLASH_Group1 FLASH Interface configuration functions + * @brief FLASH Interface configuration functions + * + +@verbatim + =============================================================================== + FLASH Interface configuration functions + =============================================================================== + + This group includes the following functions: + - void FLASH_SetLatency(uint32_t FLASH_Latency) + To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. + +-------------------------------------------------------------------------------------+ + | Latency | HCLK clock frequency (MHz) | + | |---------------------------------------------------------------------| + | | voltage range | voltage range | voltage range | voltage range | + | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | + |---------------|----------------|----------------|-----------------|-----------------| + |0WS(1CPU cycle)|0 < HCLK <= 30 |0 < HCLK <= 24 |0 < HCLK <= 18 |0 < HCLK <= 16 | + |---------------|----------------|----------------|-----------------|-----------------| + |1WS(2CPU cycle)|30 < HCLK <= 60 |24 < HCLK <= 48 |18 < HCLK <= 36 |16 < HCLK <= 32 | + |---------------|----------------|----------------|-----------------|-----------------| + |2WS(3CPU cycle)|60 < HCLK <= 90 |48 < HCLK <= 72 |36 < HCLK <= 54 |32 < HCLK <= 48 | + |---------------|----------------|----------------|-----------------|-----------------| + |3WS(4CPU cycle)|90 < HCLK <= 120|72 < HCLK <= 96 |54 < HCLK <= 72 |48 < HCLK <= 64 | + |---------------|----------------|----------------|-----------------|-----------------| + |4WS(5CPU cycle)|120< HCLK <= 150|96 < HCLK <= 120|72 < HCLK <= 90 |64 < HCLK <= 80 | + |---------------|----------------|----------------|-----------------|-----------------| + |5WS(6CPU cycle)|120< HCLK <= 168|120< HCLK <= 144|90 < HCLK <= 108 |80 < HCLK <= 96 | + |---------------|----------------|----------------|-----------------|-----------------| + |6WS(7CPU cycle)| NA |144< HCLK <= 168|108 < HCLK <= 120|96 < HCLK <= 112 | + |---------------|----------------|----------------|-----------------|-----------------| + |7WS(8CPU cycle)| NA | NA |120 < HCLK <= 138|112 < HCLK <= 120| + |***************|****************|****************|*****************|*****************|*****************************+ + | | voltage range | voltage range | voltage range | voltage range | voltage range 2.7 V - 3.6 V | + | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | with External Vpp = 9V | + |---------------|----------------|----------------|-----------------|-----------------|-----------------------------| + |Max Parallelism| x32 | x16 | x8 | x64 | + |---------------|----------------|----------------|-----------------|-----------------|-----------------------------| + |PSIZE[1:0] | 10 | 01 | 00 | 11 | + +-------------------------------------------------------------------------------------------------------------------+ + @note When VOS bit (in PWR_CR register) is reset to '0’, the maximum value of HCLK is 144 MHz. + You can use PWR_MainRegulatorModeConfig() function to set or reset this bit. + + - void FLASH_PrefetchBufferCmd(FunctionalState NewState) + - void FLASH_InstructionCacheCmd(FunctionalState NewState) + - void FLASH_DataCacheCmd(FunctionalState NewState) + - void FLASH_InstructionCacheReset(void) + - void FLASH_DataCacheReset(void) + + The unlock sequence is not needed for these functions. + +@endverbatim + * @{ + */ + +/** + * @brief Sets the code latency value. + * @param FLASH_Latency: specifies the FLASH Latency value. + * This parameter can be one of the following values: + * @arg FLASH_Latency_0: FLASH Zero Latency cycle + * @arg FLASH_Latency_1: FLASH One Latency cycle + * @arg FLASH_Latency_2: FLASH Two Latency cycles + * @arg FLASH_Latency_3: FLASH Three Latency cycles + * @arg FLASH_Latency_4: FLASH Four Latency cycles + * @arg FLASH_Latency_5: FLASH Five Latency cycles + * @arg FLASH_Latency_6: FLASH Six Latency cycles + * @arg FLASH_Latency_7: FLASH Seven Latency cycles + * @retval None + */ +void FLASH_SetLatency(uint32_t FLASH_Latency) +{ + /* Check the parameters */ + assert_param(IS_FLASH_LATENCY(FLASH_Latency)); + + /* Perform Byte access to FLASH_ACR[8:0] to set the Latency value */ + *(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)FLASH_Latency; +} + +/** + * @brief Enables or disables the Prefetch Buffer. + * @param NewState: new state of the Prefetch Buffer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FLASH_PrefetchBufferCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Enable or disable the Prefetch Buffer */ + if(NewState != DISABLE) + { + FLASH->ACR |= FLASH_ACR_PRFTEN; + } + else + { + FLASH->ACR &= (~FLASH_ACR_PRFTEN); + } +} + +/** + * @brief Enables or disables the Instruction Cache feature. + * @param NewState: new state of the Instruction Cache. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FLASH_InstructionCacheCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if(NewState != DISABLE) + { + FLASH->ACR |= FLASH_ACR_ICEN; + } + else + { + FLASH->ACR &= (~FLASH_ACR_ICEN); + } +} + +/** + * @brief Enables or disables the Data Cache feature. + * @param NewState: new state of the Data Cache. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FLASH_DataCacheCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if(NewState != DISABLE) + { + FLASH->ACR |= FLASH_ACR_DCEN; + } + else + { + FLASH->ACR &= (~FLASH_ACR_DCEN); + } +} + +/** + * @brief Resets the Instruction Cache. + * @note This function must be used only when the Instruction Cache is disabled. + * @param None + * @retval None + */ +void FLASH_InstructionCacheReset(void) +{ + FLASH->ACR |= FLASH_ACR_ICRST; +} + +/** + * @brief Resets the Data Cache. + * @note This function must be used only when the Data Cache is disabled. + * @param None + * @retval None + */ +void FLASH_DataCacheReset(void) +{ + FLASH->ACR |= FLASH_ACR_DCRST; +} + +/** + * @} + */ + +/** @defgroup FLASH_Group2 FLASH Memory Programming functions + * @brief FLASH Memory Programming functions + * +@verbatim + =============================================================================== + FLASH Memory Programming functions + =============================================================================== + + This group includes the following functions: + - void FLASH_Unlock(void) + - void FLASH_Lock(void) + - FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange) + - FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange) + - FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data) + - FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) + - FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) + - FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data) + + Any operation of erase or program should follow these steps: + 1. Call the FLASH_Unlock() function to enable the FLASH control register access + + 2. Call the desired function to erase sector(s) or program data + + 3. Call the FLASH_Lock() function to disable the FLASH control register access + (recommended to protect the FLASH memory against possible unwanted operation) + +@endverbatim + * @{ + */ + +/** + * @brief Unlocks the FLASH control register access + * @param None + * @retval None + */ +void FLASH_Unlock(void) +{ + if((FLASH->CR & FLASH_CR_LOCK) != RESET) + { + /* Authorize the FLASH Registers access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; + } +} + +/** + * @brief Locks the FLASH control register access + * @param None + * @retval None + */ +void FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Registers access */ + FLASH->CR |= FLASH_CR_LOCK; +} + +/** + * @brief Erases a specified FLASH Sector. + * + * @param FLASH_Sector: The Sector number to be erased. + * This parameter can be a value between FLASH_Sector_0 and FLASH_Sector_11 + * + * @param VoltageRange: The device voltage range which defines the erase parallelism. + * This parameter can be one of the following values: + * @arg VoltageRange_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) + * @arg VoltageRange_2: when the device voltage range is 2.1V to 2.7V, + * the operation will be done by half word (16-bit) + * @arg VoltageRange_3: when the device voltage range is 2.7V to 3.6V, + * the operation will be done by word (32-bit) + * @arg VoltageRange_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * the operation will be done by double word (64-bit) + * + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, + * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. + */ +FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange) +{ + uint32_t tmp_psize = 0x0; + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_SECTOR(FLASH_Sector)); + assert_param(IS_VOLTAGERANGE(VoltageRange)); + + if(VoltageRange == VoltageRange_1) + { + tmp_psize = FLASH_PSIZE_BYTE; + } + else if(VoltageRange == VoltageRange_2) + { + tmp_psize = FLASH_PSIZE_HALF_WORD; + } + else if(VoltageRange == VoltageRange_3) + { + tmp_psize = FLASH_PSIZE_WORD; + } + else + { + tmp_psize = FLASH_PSIZE_DOUBLE_WORD; + } + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the sector */ + FLASH->CR &= CR_PSIZE_MASK; + FLASH->CR |= tmp_psize; + FLASH->CR &= SECTOR_MASK; + FLASH->CR |= FLASH_CR_SER | FLASH_Sector; + FLASH->CR |= FLASH_CR_STRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + /* if the erase operation is completed, disable the SER Bit */ + FLASH->CR &= (~FLASH_CR_SER); + FLASH->CR &= SECTOR_MASK; + } + /* Return the Erase Status */ + return status; +} + +/** + * @brief Erases all FLASH Sectors. + * + * @param VoltageRange: The device voltage range which defines the erase parallelism. + * This parameter can be one of the following values: + * @arg VoltageRange_1: when the device voltage range is 1.8V to 2.1V, + * the operation will be done by byte (8-bit) + * @arg VoltageRange_2: when the device voltage range is 2.1V to 2.7V, + * the operation will be done by half word (16-bit) + * @arg VoltageRange_3: when the device voltage range is 2.7V to 3.6V, + * the operation will be done by word (32-bit) + * @arg VoltageRange_4: when the device voltage range is 2.7V to 3.6V + External Vpp, + * the operation will be done by double word (64-bit) + * + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, + * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. + */ +FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange) +{ + uint32_t tmp_psize = 0x0; + FLASH_Status status = FLASH_COMPLETE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + assert_param(IS_VOLTAGERANGE(VoltageRange)); + + if(VoltageRange == VoltageRange_1) + { + tmp_psize = FLASH_PSIZE_BYTE; + } + else if(VoltageRange == VoltageRange_2) + { + tmp_psize = FLASH_PSIZE_HALF_WORD; + } + else if(VoltageRange == VoltageRange_3) + { + tmp_psize = FLASH_PSIZE_WORD; + } + else + { + tmp_psize = FLASH_PSIZE_DOUBLE_WORD; + } + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all sectors */ + FLASH->CR &= CR_PSIZE_MASK; + FLASH->CR |= tmp_psize; + FLASH->CR |= FLASH_CR_MER; + FLASH->CR |= FLASH_CR_STRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + /* if the erase operation is completed, disable the MER Bit */ + FLASH->CR &= (~FLASH_CR_MER); + + } + /* Return the Erase Status */ + return status; +} + +/** + * @brief Programs a double word (64-bit) at a specified address. + * @note This function must be used when the device voltage range is from + * 2.7V to 3.6V and an External Vpp is present. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, + * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. + */ +FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR &= CR_PSIZE_MASK; + FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD; + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint64_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + /* if the program operation is completed, disable the PG Bit */ + FLASH->CR &= (~FLASH_CR_PG); + } + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a word (32-bit) at a specified address. + * @param Address: specifies the address to be programmed. + * This parameter can be any address in Program memory zone or in OTP zone. + * @note This function must be used when the device voltage range is from 2.7V to 3.6V. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, + * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. + */ +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR &= CR_PSIZE_MASK; + FLASH->CR |= FLASH_PSIZE_WORD; + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint32_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + /* if the program operation is completed, disable the PG Bit */ + FLASH->CR &= (~FLASH_CR_PG); + } + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a half word (16-bit) at a specified address. + * @note This function must be used when the device voltage range is from 2.1V to 3.6V. + * @param Address: specifies the address to be programmed. + * This parameter can be any address in Program memory zone or in OTP zone. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, + * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. + */ +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR &= CR_PSIZE_MASK; + FLASH->CR |= FLASH_PSIZE_HALF_WORD; + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + /* if the program operation is completed, disable the PG Bit */ + FLASH->CR &= (~FLASH_CR_PG); + } + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a byte (8-bit) at a specified address. + * @note This function can be used within all the device supply voltage ranges. + * @param Address: specifies the address to be programmed. + * This parameter can be any address in Program memory zone or in OTP zone. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, + * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. + */ +FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR &= CR_PSIZE_MASK; + FLASH->CR |= FLASH_PSIZE_BYTE; + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint8_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + /* if the program operation is completed, disable the PG Bit */ + FLASH->CR &= (~FLASH_CR_PG); + } + + /* Return the Program Status */ + return status; +} + +/** + * @} + */ + +/** @defgroup FLASH_Group3 Option Bytes Programming functions + * @brief Option Bytes Programming functions + * +@verbatim + =============================================================================== + Option Bytes Programming functions + =============================================================================== + + This group includes the following functions: + - void FLASH_OB_Unlock(void) + - void FLASH_OB_Lock(void) + - void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState) + - void FLASH_OB_RDPConfig(uint8_t OB_RDP) + - void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) + - void FLASH_OB_BORConfig(uint8_t OB_BOR) + - FLASH_Status FLASH_ProgramOTP(uint32_t Address, uint32_t Data) + - FLASH_Status FLASH_OB_Launch(void) + - uint32_t FLASH_OB_GetUser(void) + - uint8_t FLASH_OB_GetWRP(void) + - uint8_t FLASH_OB_GetRDP(void) + - uint8_t FLASH_OB_GetBOR(void) + + Any operation of erase or program should follow these steps: + 1. Call the FLASH_OB_Unlock() function to enable the FLASH option control register access + + 2. Call one or several functions to program the desired Option Bytes: + - void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState) => to Enable/Disable + the desired sector write protection + - void FLASH_OB_RDPConfig(uint8_t OB_RDP) => to set the desired read Protection Level + - void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) => to configure + the user Option Bytes. + - void FLASH_OB_BORConfig(uint8_t OB_BOR) => to set the BOR Level + + 3. Once all needed Option Bytes to be programmed are correctly written, call the + FLASH_OB_Launch() function to launch the Option Bytes programming process. + + @note When changing the IWDG mode from HW to SW or from SW to HW, a system + reset is needed to make the change effective. + + 4. Call the FLASH_OB_Lock() function to disable the FLASH option control register + access (recommended to protect the Option Bytes against possible unwanted operations) + +@endverbatim + * @{ + */ + +/** + * @brief Unlocks the FLASH Option Control Registers access. + * @param None + * @retval None + */ +void FLASH_OB_Unlock(void) +{ + if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET) + { + /* Authorizes the Option Byte register programming */ + FLASH->OPTKEYR = FLASH_OPT_KEY1; + FLASH->OPTKEYR = FLASH_OPT_KEY2; + } +} + +/** + * @brief Locks the FLASH Option Control Registers access. + * @param None + * @retval None + */ +void FLASH_OB_Lock(void) +{ + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK; +} + +/** + * @brief Enables or disables the write protection of the desired sectors + * @param OB_WRP: specifies the sector(s) to be write protected or unprotected. + * This parameter can be one of the following values: + * @arg OB_WRP: A value between OB_WRP_Sector0 and OB_WRP_Sector11 + * @arg OB_WRP_Sector_All + * @param Newstate: new state of the Write Protection. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_WRP(OB_WRP)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + status = FLASH_WaitForLastOperation(); + + if(status == FLASH_COMPLETE) + { + if(NewState != DISABLE) + { + *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~OB_WRP); + } + else + { + *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)OB_WRP; + } + } +} + +/** + * @brief Sets the read protection level. + * @param OB_RDP: specifies the read protection level. + * This parameter can be one of the following values: + * @arg OB_RDP_Level_0: No protection + * @arg OB_RDP_Level_1: Read protection of the memory + * @arg OB_RDP_Level_2: Full chip protection + * + * !!!Warning!!! When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0 + * + * @retval None + */ +void FLASH_OB_RDPConfig(uint8_t OB_RDP) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_RDP(OB_RDP)); + + status = FLASH_WaitForLastOperation(); + + if(status == FLASH_COMPLETE) + { + *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = OB_RDP; + + } +} + +/** + * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + * @param OB_IWDG: Selects the IWDG mode + * This parameter can be one of the following values: + * @arg OB_IWDG_SW: Software IWDG selected + * @arg OB_IWDG_HW: Hardware IWDG selected + * @param OB_STOP: Reset event when entering STOP mode. + * This parameter can be one of the following values: + * @arg OB_STOP_NoRST: No reset generated when entering in STOP + * @arg OB_STOP_RST: Reset generated when entering in STOP + * @param OB_STDBY: Reset event when entering Standby mode. + * This parameter can be one of the following values: + * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY + * @arg OB_STDBY_RST: Reset generated when entering in STANDBY + * @retval None + */ +void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) +{ + uint8_t optiontmp = 0xFF; + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); + assert_param(IS_OB_STOP_SOURCE(OB_STOP)); + assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + if(status == FLASH_COMPLETE) + { + /* Mask OPTLOCK, OPTSTRT and BOR_LEV bits */ + optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0F); + + /* Update User Option Byte */ + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = OB_IWDG | (uint8_t)(OB_STDBY | (uint8_t)(OB_STOP | ((uint8_t)optiontmp))); + } +} + +/** + * @brief Sets the BOR Level. + * @param OB_BOR: specifies the Option Bytes BOR Reset Level. + * This parameter can be one of the following values: + * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V + * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V + * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V + * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V + * @retval None + */ +void FLASH_OB_BORConfig(uint8_t OB_BOR) +{ + /* Check the parameters */ + assert_param(IS_OB_BOR(OB_BOR)); + + /* Set the BOR Level */ + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV); + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= OB_BOR; + +} + +/** + * @brief Launch the option byte loading. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, + * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. + */ +FLASH_Status FLASH_OB_Launch(void) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Set the OPTSTRT bit in OPTCR register */ + *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(); + + return status; +} + +/** + * @brief Returns the FLASH User Option Bytes values. + * @param None + * @retval The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1) + * and RST_STDBY(Bit2). + */ +uint8_t FLASH_OB_GetUser(void) +{ + /* Return the User Option Byte */ + return (uint8_t)(FLASH->OPTCR >> 5); +} + +/** + * @brief Returns the FLASH Write Protection Option Bytes value. + * @param None + * @retval The FLASH Write Protection Option Bytes value + */ +uint16_t FLASH_OB_GetWRP(void) +{ + /* Return the FLASH write protection Register value */ + return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS)); +} + +/** + * @brief Returns the FLASH Read Protection level. + * @param None + * @retval FLASH ReadOut Protection Status: + * - SET, when OB_RDP_Level_1 or OB_RDP_Level_2 is set + * - RESET, when OB_RDP_Level_0 is set + */ +FlagStatus FLASH_OB_GetRDP(void) +{ + FlagStatus readstatus = RESET; + + if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) != (uint8_t)OB_RDP_Level_0)) + { + readstatus = SET; + } + else + { + readstatus = RESET; + } + return readstatus; +} + +/** + * @brief Returns the FLASH BOR level. + * @param None + * @retval The FLASH BOR level: + * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V + * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V + * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V + * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V + */ +uint8_t FLASH_OB_GetBOR(void) +{ + /* Return the FLASH BOR level */ + return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0C); +} + +/** + * @} + */ + +/** @defgroup FLASH_Group4 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified FLASH interrupts. + * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FLASH_IT_ERR: FLASH Error Interrupt + * @arg FLASH_IT_EOP: FLASH end of operation Interrupt + * @retval None + */ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } +} + +/** + * @brief Checks whether the specified FLASH flag is set or not. + * @param FLASH_FLAG: specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR: FLASH operation Error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag + * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag + * @arg FLASH_FLAG_BSY: FLASH Busy flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)); + + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the new state of FLASH_FLAG (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Clears the FLASH's pending flags. + * @param FLASH_FLAG: specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR: FLASH operation Error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag + * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag + * @retval None + */ +void FLASH_ClearFlag(uint32_t FLASH_FLAG) +{ + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)); + + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; +} + +/** + * @brief Returns the FLASH Status. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, + * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. + */ +FLASH_Status FLASH_GetStatus(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & FLASH_FLAG_WRPERR) != (uint32_t)0x00) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + if((FLASH->SR & (uint32_t)0xEF) != (uint32_t)0x00) + { + flashstatus = FLASH_ERROR_PROGRAM; + } + else + { + if((FLASH->SR & FLASH_FLAG_OPERR) != (uint32_t)0x00) + { + flashstatus = FLASH_ERROR_OPERATION; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + } + /* Return the FLASH Status */ + return flashstatus; +} + +/** + * @brief Waits for a FLASH operation to complete. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, + * FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE. + */ +FLASH_Status FLASH_WaitForLastOperation(void) +{ + __IO FLASH_Status status = FLASH_COMPLETE; + + /* Check for the FLASH Status */ + status = FLASH_GetStatus(); + + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + while(status == FLASH_BUSY) + { + status = FLASH_GetStatus(); + } + /* Return the operation status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_flash.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_flash.h new file mode 100644 index 00000000000..d1a7616cba8 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_flash.h @@ -0,0 +1,334 @@ +/** + ****************************************************************************** + * @file stm32f4xx_flash.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the FLASH + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_FLASH_H +#define __STM32F4xx_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** + * @brief FLASH Status + */ +typedef enum +{ + FLASH_BUSY = 1, + FLASH_ERROR_PGS, + FLASH_ERROR_PGP, + FLASH_ERROR_PGA, + FLASH_ERROR_WRP, + FLASH_ERROR_PROGRAM, + FLASH_ERROR_OPERATION, + FLASH_COMPLETE +}FLASH_Status; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FLASH_Exported_Constants + * @{ + */ + +/** @defgroup Flash_Latency + * @{ + */ +#define FLASH_Latency_0 ((uint8_t)0x0000) /*!< FLASH Zero Latency cycle */ +#define FLASH_Latency_1 ((uint8_t)0x0001) /*!< FLASH One Latency cycle */ +#define FLASH_Latency_2 ((uint8_t)0x0002) /*!< FLASH Two Latency cycles */ +#define FLASH_Latency_3 ((uint8_t)0x0003) /*!< FLASH Three Latency cycles */ +#define FLASH_Latency_4 ((uint8_t)0x0004) /*!< FLASH Four Latency cycles */ +#define FLASH_Latency_5 ((uint8_t)0x0005) /*!< FLASH Five Latency cycles */ +#define FLASH_Latency_6 ((uint8_t)0x0006) /*!< FLASH Six Latency cycles */ +#define FLASH_Latency_7 ((uint8_t)0x0007) /*!< FLASH Seven Latency cycles */ + +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ + ((LATENCY) == FLASH_Latency_1) || \ + ((LATENCY) == FLASH_Latency_2) || \ + ((LATENCY) == FLASH_Latency_3) || \ + ((LATENCY) == FLASH_Latency_4) || \ + ((LATENCY) == FLASH_Latency_5) || \ + ((LATENCY) == FLASH_Latency_6) || \ + ((LATENCY) == FLASH_Latency_7)) +/** + * @} + */ + +/** @defgroup FLASH_Voltage_Range + * @{ + */ +#define VoltageRange_1 ((uint8_t)0x00) /*!< Device operating range: 1.8V to 2.1V */ +#define VoltageRange_2 ((uint8_t)0x01) /*!= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) ||\ + (((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) < 0x1FFF7A0F))) +/** + * @} + */ + +/** @defgroup Option_Bytes_Write_Protection + * @{ + */ +#define OB_WRP_Sector_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */ +#define OB_WRP_Sector_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */ +#define OB_WRP_Sector_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */ +#define OB_WRP_Sector_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */ +#define OB_WRP_Sector_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */ +#define OB_WRP_Sector_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */ +#define OB_WRP_Sector_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */ +#define OB_WRP_Sector_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */ +#define OB_WRP_Sector_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */ +#define OB_WRP_Sector_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */ +#define OB_WRP_Sector_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */ +#define OB_WRP_Sector_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */ +#define OB_WRP_Sector_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */ + +#define IS_OB_WRP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000)) +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_Read_Protection + * @{ + */ +#define OB_RDP_Level_0 ((uint8_t)0xAA) +#define OB_RDP_Level_1 ((uint8_t)0x55) +/*#define OB_RDP_Level_2 ((uint8_t)0xCC)*/ /*!< Warning: When enabling read protection level 2 + it's no more possible to go back to level 1 or 0 */ +#define IS_OB_RDP(LEVEL) (((LEVEL) == OB_RDP_Level_0)||\ + ((LEVEL) == OB_RDP_Level_1))/*||\ + ((LEVEL) == OB_RDP_Level_2))*/ +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_IWatchdog + * @{ + */ +#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */ +#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */ +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) +/** + * @} + */ + +/** @defgroup FLASH_Option_Bytes_nRST_STOP + * @{ + */ +#define OB_STOP_NoRST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) +/** + * @} + */ + + +/** @defgroup FLASH_Option_Bytes_nRST_STDBY + * @{ + */ +#define OB_STDBY_NoRST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) +/** + * @} + */ + +/** @defgroup FLASH_BOR_Reset_Level + * @{ + */ +#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */ +#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */ +#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */ +#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */ +#define IS_OB_BOR(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\ + ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF)) +/** + * @} + */ + +/** @defgroup FLASH_Interrupts + * @{ + */ +#define FLASH_IT_EOP ((uint32_t)0x01000000) /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */ +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFCFFFFFF) == 0x00000000) && ((IT) != 0x00000000)) +/** + * @} + */ + +/** @defgroup FLASH_Flags + * @{ + */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000001) /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_OPERR ((uint32_t)0x00000002) /*!< FLASH operation Error flag */ +#define FLASH_FLAG_WRPERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_PGAERR ((uint32_t)0x00000020) /*!< FLASH Programming Alignment error flag */ +#define FLASH_FLAG_PGPERR ((uint32_t)0x00000040) /*!< FLASH Programming Parallelism error flag */ +#define FLASH_FLAG_PGSERR ((uint32_t)0x00000080) /*!< FLASH Programming Sequence error flag */ +#define FLASH_FLAG_BSY ((uint32_t)0x00010000) /*!< FLASH Busy flag */ +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF0C) == 0x00000000) && ((FLAG) != 0x00000000)) +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_EOP) || ((FLAG) == FLASH_FLAG_OPERR) || \ + ((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_PGAERR) || \ + ((FLAG) == FLASH_FLAG_PGPERR) || ((FLAG) == FLASH_FLAG_PGSERR) || \ + ((FLAG) == FLASH_FLAG_BSY)) +/** + * @} + */ + +/** @defgroup FLASH_Program_Parallelism + * @{ + */ +#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000) +#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100) +#define FLASH_PSIZE_WORD ((uint32_t)0x00000200) +#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300) +#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF) +/** + * @} + */ + +/** @defgroup FLASH_Keys + * @{ + */ +#define RDP_KEY ((uint16_t)0x00A5) +#define FLASH_KEY1 ((uint32_t)0x45670123) +#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) +#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B) +#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F) +/** + * @} + */ + +/** + * @brief ACR register byte 0 (Bits[8:0]) base address + */ +#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00) +/** + * @brief OPTCR register byte 3 (Bits[24:16]) base address + */ +#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14) +#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15) +#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* FLASH Interface configuration functions ************************************/ +void FLASH_SetLatency(uint32_t FLASH_Latency); +void FLASH_PrefetchBufferCmd(FunctionalState NewState); +void FLASH_InstructionCacheCmd(FunctionalState NewState); +void FLASH_DataCacheCmd(FunctionalState NewState); +void FLASH_InstructionCacheReset(void); +void FLASH_DataCacheReset(void); + +/* FLASH Memory Programming functions *****************************************/ +void FLASH_Unlock(void); +void FLASH_Lock(void); +FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange); +FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange); +FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data); +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); +FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data); + +/* Option Bytes Programming functions *****************************************/ +void FLASH_OB_Unlock(void); +void FLASH_OB_Lock(void); +void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState); +void FLASH_OB_RDPConfig(uint8_t OB_RDP); +void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY); +void FLASH_OB_BORConfig(uint8_t OB_BOR); +FLASH_Status FLASH_OB_Launch(void); +uint8_t FLASH_OB_GetUser(void); +uint16_t FLASH_OB_GetWRP(void); +FlagStatus FLASH_OB_GetRDP(void); +uint8_t FLASH_OB_GetBOR(void); + +/* Interrupts and flags management functions **********************************/ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState); +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG); +void FLASH_ClearFlag(uint32_t FLASH_FLAG); +FLASH_Status FLASH_GetStatus(void); +FLASH_Status FLASH_WaitForLastOperation(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_FLASH_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_fsmc.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_fsmc.c new file mode 100644 index 00000000000..ae423f97dfc --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_fsmc.c @@ -0,0 +1,983 @@ +/** + ****************************************************************************** + * @file stm32f4xx_fsmc.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the FSMC peripheral: + * - Interface with SRAM, PSRAM, NOR and OneNAND memories + * - Interface with NAND memories + * - Interface with 16-bit PC Card compatible memories + * - Interrupts and flags management + * + ****************************************************************************** + + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_fsmc.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup FSMC + * @brief FSMC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* --------------------- FSMC registers bit mask ---------------------------- */ +/* FSMC BCRx Mask */ +#define BCR_MBKEN_SET ((uint32_t)0x00000001) +#define BCR_MBKEN_RESET ((uint32_t)0x000FFFFE) +#define BCR_FACCEN_SET ((uint32_t)0x00000040) + +/* FSMC PCRx Mask */ +#define PCR_PBKEN_SET ((uint32_t)0x00000004) +#define PCR_PBKEN_RESET ((uint32_t)0x000FFFFB) +#define PCR_ECCEN_SET ((uint32_t)0x00000040) +#define PCR_ECCEN_RESET ((uint32_t)0x000FFFBF) +#define PCR_MEMORYTYPE_NAND ((uint32_t)0x00000008) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup FSMC_Private_Functions + * @{ + */ + +/** @defgroup FSMC_Group1 NOR/SRAM Controller functions + * @brief NOR/SRAM Controller functions + * +@verbatim + =============================================================================== + NOR/SRAM Controller functions + =============================================================================== + + The following sequence should be followed to configure the FSMC to interface with + SRAM, PSRAM, NOR or OneNAND memory connected to the NOR/SRAM Bank: + + 1. Enable the clock for the FSMC and associated GPIOs using the following functions: + RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FSMC, ENABLE); + RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + + 2. FSMC pins configuration + - Connect the involved FSMC pins to AF12 using the following function + GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FSMC); + - Configure these FSMC pins in alternate function mode by calling the function + GPIO_Init(); + + 3. Declare a FSMC_NORSRAMInitTypeDef structure, for example: + FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure; + and fill the FSMC_NORSRAMInitStructure variable with the allowed values of + the structure member. + + 4. Initialize the NOR/SRAM Controller by calling the function + FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); + + 5. Then enable the NOR/SRAM Bank, for example: + FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM2, ENABLE); + + 6. At this stage you can read/write from/to the memory connected to the NOR/SRAM Bank. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default + * reset values. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @retval None + */ +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + + /* FSMC_Bank1_NORSRAM1 */ + if(FSMC_Bank == FSMC_Bank1_NORSRAM1) + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB; + } + /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */ + else + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; + } + FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF; + FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF; +} + +/** + * @brief Initializes the FSMC NOR/SRAM Banks according to the specified + * parameters in the FSMC_NORSRAMInitStruct. + * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef structure + * that contains the configuration information for the FSMC NOR/SRAM + * specified Banks. + * @retval None + */ +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank)); + assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux)); + assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType)); + assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth)); + assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode)); + assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait)); + assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity)); + assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode)); + assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive)); + assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation)); + assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal)); + assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode)); + assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); + + /* Bank1 NOR/SRAM control register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux | + FSMC_NORSRAMInitStruct->FSMC_MemoryType | + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth | + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode | + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity | + FSMC_NORSRAMInitStruct->FSMC_WrapMode | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive | + FSMC_NORSRAMInitStruct->FSMC_WriteOperation | + FSMC_NORSRAMInitStruct->FSMC_WaitSignal | + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode | + FSMC_NORSRAMInitStruct->FSMC_WriteBurst; + if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR) + { + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_SET; + } + /* Bank1 NOR/SRAM timing register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode; + + + /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */ + if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable) + { + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode)); + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )| + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode; + } + else + { + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF; + } +} + +/** + * @brief Fills each FSMC_NORSRAMInitStruct member with its default value. + * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef structure + * which will be initialized. + * @retval None + */ +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Reset NOR/SRAM Init structure parameters values */ + FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1; + FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable; + FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM; + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable; + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; +} + +/** + * @brief Enables or disables the specified NOR/SRAM Memory Bank. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_SET; + } + else + { + /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_RESET; + } +} +/** + * @} + */ + +/** @defgroup FSMC_Group2 NAND Controller functions + * @brief NAND Controller functions + * +@verbatim + =============================================================================== + NAND Controller functions + =============================================================================== + + The following sequence should be followed to configure the FSMC to interface with + 8-bit or 16-bit NAND memory connected to the NAND Bank: + + 1. Enable the clock for the FSMC and associated GPIOs using the following functions: + RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FSMC, ENABLE); + RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + + 2. FSMC pins configuration + - Connect the involved FSMC pins to AF12 using the following function + GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FSMC); + - Configure these FSMC pins in alternate function mode by calling the function + GPIO_Init(); + + 3. Declare a FSMC_NANDInitTypeDef structure, for example: + FSMC_NANDInitTypeDef FSMC_NANDInitStructure; + and fill the FSMC_NANDInitStructure variable with the allowed values of + the structure member. + + 4. Initialize the NAND Controller by calling the function + FSMC_NANDInit(&FSMC_NANDInitStructure); + + 5. Then enable the NAND Bank, for example: + FSMC_NANDCmd(FSMC_Bank3_NAND, ENABLE); + + 6. At this stage you can read/write from/to the memory connected to the NAND Bank. + +@note To enable the Error Correction Code (ECC), you have to use the function + FSMC_NANDECCCmd(FSMC_Bank3_NAND, ENABLE); + and to get the current ECC value you have to use the function + ECCval = FSMC_GetECC(FSMC_Bank3_NAND); + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the FSMC NAND Banks registers to their default reset values. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @retval None + */ +void FSMC_NANDDeInit(uint32_t FSMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + /* Set the FSMC_Bank2 registers to their reset values */ + FSMC_Bank2->PCR2 = 0x00000018; + FSMC_Bank2->SR2 = 0x00000040; + FSMC_Bank2->PMEM2 = 0xFCFCFCFC; + FSMC_Bank2->PATT2 = 0xFCFCFCFC; + } + /* FSMC_Bank3_NAND */ + else + { + /* Set the FSMC_Bank3 registers to their reset values */ + FSMC_Bank3->PCR3 = 0x00000018; + FSMC_Bank3->SR3 = 0x00000040; + FSMC_Bank3->PMEM3 = 0xFCFCFCFC; + FSMC_Bank3->PATT3 = 0xFCFCFCFC; + } +} + +/** + * @brief Initializes the FSMC NAND Banks according to the specified parameters + * in the FSMC_NANDInitStruct. + * @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef structure that + * contains the configuration information for the FSMC NAND specified Banks. + * @retval None + */ +void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) +{ + uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; + + /* Check the parameters */ + assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank)); + assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature)); + assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth)); + assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC)); + assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize)); + assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime)); + assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); + + /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */ + tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature | + PCR_MEMORYTYPE_NAND | + FSMC_NANDInitStruct->FSMC_MemoryDataWidth | + FSMC_NANDInitStruct->FSMC_ECC | + FSMC_NANDInitStruct->FSMC_ECCPageSize | + (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )| + (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13); + + /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */ + tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */ + tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND) + { + /* FSMC_Bank2_NAND registers configuration */ + FSMC_Bank2->PCR2 = tmppcr; + FSMC_Bank2->PMEM2 = tmppmem; + FSMC_Bank2->PATT2 = tmppatt; + } + else + { + /* FSMC_Bank3_NAND registers configuration */ + FSMC_Bank3->PCR3 = tmppcr; + FSMC_Bank3->PMEM3 = tmppmem; + FSMC_Bank3->PATT3 = tmppatt; + } +} + + +/** + * @brief Fills each FSMC_NANDInitStruct member with its default value. + * @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef structure which + * will be initialized. + * @retval None + */ +void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) +{ + /* Reset NAND Init structure parameters values */ + FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND; + FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; + FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; + FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable; + FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes; + FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0; + FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; +} + +/** + * @brief Enables or disables the specified NAND Memory Bank. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 |= PCR_PBKEN_SET; + } + else + { + FSMC_Bank3->PCR3 |= PCR_PBKEN_SET; + } + } + else + { + /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 &= PCR_PBKEN_RESET; + } + else + { + FSMC_Bank3->PCR3 &= PCR_PBKEN_RESET; + } + } +} +/** + * @brief Enables or disables the FSMC NAND ECC feature. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @param NewState: new state of the FSMC NAND ECC feature. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 |= PCR_ECCEN_SET; + } + else + { + FSMC_Bank3->PCR3 |= PCR_ECCEN_SET; + } + } + else + { + /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 &= PCR_ECCEN_RESET; + } + else + { + FSMC_Bank3->PCR3 &= PCR_ECCEN_RESET; + } + } +} + +/** + * @brief Returns the error correction code register value. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @retval The Error Correction Code (ECC) value. + */ +uint32_t FSMC_GetECC(uint32_t FSMC_Bank) +{ + uint32_t eccval = 0x00000000; + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + /* Get the ECCR2 register value */ + eccval = FSMC_Bank2->ECCR2; + } + else + { + /* Get the ECCR3 register value */ + eccval = FSMC_Bank3->ECCR3; + } + /* Return the error correction code value */ + return(eccval); +} +/** + * @} + */ + +/** @defgroup FSMC_Group3 PCCARD Controller functions + * @brief PCCARD Controller functions + * +@verbatim + =============================================================================== + PCCARD Controller functions + =============================================================================== + + The following sequence should be followed to configure the FSMC to interface with + 16-bit PC Card compatible memory connected to the PCCARD Bank: + + 1. Enable the clock for the FSMC and associated GPIOs using the following functions: + RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FSMC, ENABLE); + RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + + 2. FSMC pins configuration + - Connect the involved FSMC pins to AF12 using the following function + GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FSMC); + - Configure these FSMC pins in alternate function mode by calling the function + GPIO_Init(); + + 3. Declare a FSMC_PCCARDInitTypeDef structure, for example: + FSMC_PCCARDInitTypeDef FSMC_PCCARDInitStructure; + and fill the FSMC_PCCARDInitStructure variable with the allowed values of + the structure member. + + 4. Initialize the PCCARD Controller by calling the function + FSMC_PCCARDInit(&FSMC_PCCARDInitStructure); + + 5. Then enable the PCCARD Bank: + FSMC_PCCARDCmd(ENABLE); + + 6. At this stage you can read/write from/to the memory connected to the PCCARD Bank. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the FSMC PCCARD Bank registers to their default reset values. + * @param None + * @retval None + */ +void FSMC_PCCARDDeInit(void) +{ + /* Set the FSMC_Bank4 registers to their reset values */ + FSMC_Bank4->PCR4 = 0x00000018; + FSMC_Bank4->SR4 = 0x00000000; + FSMC_Bank4->PMEM4 = 0xFCFCFCFC; + FSMC_Bank4->PATT4 = 0xFCFCFCFC; + FSMC_Bank4->PIO4 = 0xFCFCFCFC; +} + +/** + * @brief Initializes the FSMC PCCARD Bank according to the specified parameters + * in the FSMC_PCCARDInitStruct. + * @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef structure + * that contains the configuration information for the FSMC PCCARD Bank. + * @retval None + */ +void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature)); + assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime)); + assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime)); + + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); + + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime)); + + /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */ + FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature | + FSMC_MemoryDataWidth_16b | + (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) | + (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13); + + /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */ + FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */ + FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */ + FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24); +} + +/** + * @brief Fills each FSMC_PCCARDInitStruct member with its default value. + * @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef structure + * which will be initialized. + * @retval None + */ +void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) +{ + /* Reset PCCARD Init structure parameters values */ + FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; + FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0; + FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; +} + +/** + * @brief Enables or disables the PCCARD Memory Bank. + * @param NewState: new state of the PCCARD Memory Bank. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_PCCARDCmd(FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */ + FSMC_Bank4->PCR4 |= PCR_PBKEN_SET; + } + else + { + /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */ + FSMC_Bank4->PCR4 &= PCR_PBKEN_RESET; + } +} +/** + * @} + */ + +/** @defgroup FSMC_Group4 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified FSMC interrupts. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @param NewState: new state of the specified FSMC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState) +{ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_IT(FSMC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected FSMC_Bank2 interrupts */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 |= FSMC_IT; + } + /* Enable the selected FSMC_Bank3 interrupts */ + else if (FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 |= FSMC_IT; + } + /* Enable the selected FSMC_Bank4 interrupts */ + else + { + FSMC_Bank4->SR4 |= FSMC_IT; + } + } + else + { + /* Disable the selected FSMC_Bank2 interrupts */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + + FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT; + } + /* Disable the selected FSMC_Bank3 interrupts */ + else if (FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT; + } + /* Disable the selected FSMC_Bank4 interrupts */ + else + { + FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT; + } + } +} + +/** + * @brief Checks whether the specified FSMC flag is set or not. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg FSMC_FLAG_RisingEdge: Rising edge detection Flag. + * @arg FSMC_FLAG_Level: Level detection Flag. + * @arg FSMC_FLAG_FallingEdge: Falling edge detection Flag. + * @arg FSMC_FLAG_FEMPT: Fifo empty Flag. + * @retval The new state of FSMC_FLAG (SET or RESET). + */ +FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpsr = 0x00000000; + + /* Check the parameters */ + assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); + assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + tmpsr = FSMC_Bank2->SR2; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + tmpsr = FSMC_Bank3->SR3; + } + /* FSMC_Bank4_PCCARD*/ + else + { + tmpsr = FSMC_Bank4->SR4; + } + + /* Get the flag status */ + if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET ) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the FSMC's pending flags. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RisingEdge: Rising edge detection Flag. + * @arg FSMC_FLAG_Level: Level detection Flag. + * @arg FSMC_FLAG_FallingEdge: Falling edge detection Flag. + * @retval None + */ +void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); + assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ; + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 &= ~FSMC_FLAG; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= ~FSMC_FLAG; + } + /* FSMC_Bank4_PCCARD*/ + else + { + FSMC_Bank4->SR4 &= ~FSMC_FLAG; + } +} + +/** + * @brief Checks whether the specified FSMC interrupt has occurred or not. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the FSMC interrupt source to check. + * This parameter can be one of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @retval The new state of FSMC_IT (SET or RESET). + */ +ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0; + + /* Check the parameters */ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_GET_IT(FSMC_IT)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + tmpsr = FSMC_Bank2->SR2; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + tmpsr = FSMC_Bank3->SR3; + } + /* FSMC_Bank4_PCCARD*/ + else + { + tmpsr = FSMC_Bank4->SR4; + } + + itstatus = tmpsr & FSMC_IT; + + itenable = tmpsr & (FSMC_IT >> 3); + if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the FSMC's interrupt pending bits. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @retval None + */ +void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT) +{ + /* Check the parameters */ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_IT(FSMC_IT)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3); + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3); + } + /* FSMC_Bank4_PCCARD*/ + else + { + FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3); + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_fsmc.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_fsmc.h new file mode 100644 index 00000000000..2411943e141 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_fsmc.h @@ -0,0 +1,669 @@ +/** + ****************************************************************************** + * @file stm32f4xx_fsmc.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the FSMC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_FSMC_H +#define __STM32F4xx_FSMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FSMC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief Timing parameters For NOR/SRAM Banks + */ +typedef struct +{ + uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between 0 and 0xF. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between 0 and 0xF. + @note This parameter is not used with synchronous NOR Flash memories.*/ + + uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between 0 and 0xFF. + @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */ + + uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between 0 and 0xF. + @note This parameter is only used for multiplexed NOR Flash memories. */ + + uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles. + This parameter can be a value between 1 and 0xF. + @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */ + + uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The parameter value depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between 0 and 0xF in NOR Flash memories + with synchronous burst mode enable */ + + uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FSMC_Access_Mode */ +}FSMC_NORSRAMTimingInitTypeDef; + +/** + * @brief FSMC NOR/SRAM Init structure definition + */ +typedef struct +{ + uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used. + This parameter can be a value of @ref FSMC_NORSRAM_Bank */ + + uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the databus or not. + This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ + + uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory bank. + This parameter can be a value of @ref FSMC_Memory_Type */ + + uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FSMC_Data_Width */ + + uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FSMC_Burst_Access_Mode */ + + uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FSMC_AsynchronousWait */ + + uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ + + uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FSMC_Wrap_Mode */ + + uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FSMC_Wait_Timing */ + + uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC. + This parameter can be a value of @ref FSMC_Write_Operation */ + + uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal */ + + uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FSMC_Extended_Mode */ + + uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FSMC_Write_Burst */ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/ +}FSMC_NORSRAMInitTypeDef; + +/** + * @brief Timing parameters For FSMC NAND and PCCARD Banks + */ +typedef struct +{ + uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between 0 and 0xFF.*/ + + uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between 0x00 and 0xFF */ + + uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command deassertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between 0x00 and 0xFF */ + + uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + databus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between 0x00 and 0xFF */ +}FSMC_NAND_PCCARDTimingInitTypeDef; + +/** + * @brief FSMC NAND Init structure definition + */ +typedef struct +{ + uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used. + This parameter can be a value of @ref FSMC_NAND_Bank */ + + uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FSMC_Data_Width */ + + uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FSMC_ECC */ + + uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FSMC_ECC_Page_Size */ + + uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 0xFF. */ + + uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0x0 and 0xFF */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ +}FSMC_NANDInitTypeDef; + +/** + * @brief FSMC PCCARD Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 0xFF. */ + + uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0x0 and 0xFF */ + + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */ +}FSMC_PCCARDInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FSMC_Exported_Constants + * @{ + */ + +/** @defgroup FSMC_NORSRAM_Bank + * @{ + */ +#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000) +#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002) +#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004) +#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006) +/** + * @} + */ + +/** @defgroup FSMC_NAND_Bank + * @{ + */ +#define FSMC_Bank2_NAND ((uint32_t)0x00000010) +#define FSMC_Bank3_NAND ((uint32_t)0x00000100) +/** + * @} + */ + +/** @defgroup FSMC_PCCARD_Bank + * @{ + */ +#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000) +/** + * @} + */ + +#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \ + ((BANK) == FSMC_Bank1_NORSRAM2) || \ + ((BANK) == FSMC_Bank1_NORSRAM3) || \ + ((BANK) == FSMC_Bank1_NORSRAM4)) + +#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND)) + +#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND) || \ + ((BANK) == FSMC_Bank4_PCCARD)) + +#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND) || \ + ((BANK) == FSMC_Bank4_PCCARD)) + +/** @defgroup FSMC_NOR_SRAM_Controller + * @{ + */ + +/** @defgroup FSMC_Data_Address_Bus_Multiplexing + * @{ + */ + +#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000) +#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002) +#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \ + ((MUX) == FSMC_DataAddressMux_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Memory_Type + * @{ + */ + +#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000) +#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004) +#define FSMC_MemoryType_NOR ((uint32_t)0x00000008) +#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \ + ((MEMORY) == FSMC_MemoryType_PSRAM)|| \ + ((MEMORY) == FSMC_MemoryType_NOR)) +/** + * @} + */ + +/** @defgroup FSMC_Data_Width + * @{ + */ + +#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000) +#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010) +#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ + ((WIDTH) == FSMC_MemoryDataWidth_16b)) +/** + * @} + */ + +/** @defgroup FSMC_Burst_Access_Mode + * @{ + */ + +#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000) +#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100) +#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \ + ((STATE) == FSMC_BurstAccessMode_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_AsynchronousWait + * @{ + */ +#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000) +#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000) +#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \ + ((STATE) == FSMC_AsynchronousWait_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal_Polarity + * @{ + */ +#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000) +#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200) +#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \ + ((POLARITY) == FSMC_WaitSignalPolarity_High)) +/** + * @} + */ + +/** @defgroup FSMC_Wrap_Mode + * @{ + */ +#define FSMC_WrapMode_Disable ((uint32_t)0x00000000) +#define FSMC_WrapMode_Enable ((uint32_t)0x00000400) +#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \ + ((MODE) == FSMC_WrapMode_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Wait_Timing + * @{ + */ +#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000) +#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800) +#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \ + ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState)) +/** + * @} + */ + +/** @defgroup FSMC_Write_Operation + * @{ + */ +#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000) +#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000) +#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \ + ((OPERATION) == FSMC_WriteOperation_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal + * @{ + */ +#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000) +#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000) +#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \ + ((SIGNAL) == FSMC_WaitSignal_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Extended_Mode + * @{ + */ +#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000) +#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000) + +#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \ + ((MODE) == FSMC_ExtendedMode_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Write_Burst + * @{ + */ + +#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000) +#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000) +#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \ + ((BURST) == FSMC_WriteBurst_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Address_Setup_Time + * @{ + */ +#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF) +/** + * @} + */ + +/** @defgroup FSMC_Address_Hold_Time + * @{ + */ +#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF) +/** + * @} + */ + +/** @defgroup FSMC_Data_Setup_Time + * @{ + */ +#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF)) +/** + * @} + */ + +/** @defgroup FSMC_Bus_Turn_around_Duration + * @{ + */ +#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF) +/** + * @} + */ + +/** @defgroup FSMC_CLK_Division + * @{ + */ +#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF) +/** + * @} + */ + +/** @defgroup FSMC_Data_Latency + * @{ + */ +#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF) +/** + * @} + */ + +/** @defgroup FSMC_Access_Mode + * @{ + */ +#define FSMC_AccessMode_A ((uint32_t)0x00000000) +#define FSMC_AccessMode_B ((uint32_t)0x10000000) +#define FSMC_AccessMode_C ((uint32_t)0x20000000) +#define FSMC_AccessMode_D ((uint32_t)0x30000000) +#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \ + ((MODE) == FSMC_AccessMode_B) || \ + ((MODE) == FSMC_AccessMode_C) || \ + ((MODE) == FSMC_AccessMode_D)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FSMC_NAND_PCCARD_Controller + * @{ + */ + +/** @defgroup FSMC_Wait_feature + * @{ + */ +#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000) +#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002) +#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \ + ((FEATURE) == FSMC_Waitfeature_Enable)) +/** + * @} + */ + + +/** @defgroup FSMC_ECC + * @{ + */ +#define FSMC_ECC_Disable ((uint32_t)0x00000000) +#define FSMC_ECC_Enable ((uint32_t)0x00000040) +#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \ + ((STATE) == FSMC_ECC_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_ECC_Page_Size + * @{ + */ +#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000) +#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000) +#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000) +#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000) +#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000) +#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000) +#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_512Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_8192Bytes)) +/** + * @} + */ + +/** @defgroup FSMC_TCLR_Setup_Time + * @{ + */ +#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF) +/** + * @} + */ + +/** @defgroup FSMC_TAR_Setup_Time + * @{ + */ +#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF) +/** + * @} + */ + +/** @defgroup FSMC_Setup_Time + * @{ + */ +#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF) +/** + * @} + */ + +/** @defgroup FSMC_Wait_Setup_Time + * @{ + */ +#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF) +/** + * @} + */ + +/** @defgroup FSMC_Hold_Setup_Time + * @{ + */ +#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF) +/** + * @} + */ + +/** @defgroup FSMC_HiZ_Setup_Time + * @{ + */ +#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF) +/** + * @} + */ + +/** @defgroup FSMC_Interrupt_sources + * @{ + */ +#define FSMC_IT_RisingEdge ((uint32_t)0x00000008) +#define FSMC_IT_Level ((uint32_t)0x00000010) +#define FSMC_IT_FallingEdge ((uint32_t)0x00000020) +#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000)) +#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \ + ((IT) == FSMC_IT_Level) || \ + ((IT) == FSMC_IT_FallingEdge)) +/** + * @} + */ + +/** @defgroup FSMC_Flags + * @{ + */ +#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001) +#define FSMC_FLAG_Level ((uint32_t)0x00000002) +#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004) +#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040) +#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \ + ((FLAG) == FSMC_FLAG_Level) || \ + ((FLAG) == FSMC_FLAG_FallingEdge) || \ + ((FLAG) == FSMC_FLAG_FEMPT)) + +#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* NOR/SRAM Controller functions **********************************************/ +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank); +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState); + +/* NAND Controller functions **************************************************/ +void FSMC_NANDDeInit(uint32_t FSMC_Bank); +void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); +void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); +void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState); +void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState); +uint32_t FSMC_GetECC(uint32_t FSMC_Bank); + +/* PCCARD Controller functions ************************************************/ +void FSMC_PCCARDDeInit(void); +void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); +void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); +void FSMC_PCCARDCmd(FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState); +FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); +void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); +ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT); +void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_FSMC_H */ +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_gpio.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_gpio.c new file mode 100644 index 00000000000..f19284cf0c0 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_gpio.c @@ -0,0 +1,562 @@ +/** + ****************************************************************************** + * @file stm32f4xx_gpio.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the GPIO peripheral: + * - Initialization and Configuration + * - GPIO Read and Write + * - GPIO Alternate functions configuration + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. Enable the GPIO AHB clock using the following function + * RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + * + * 2. Configure the GPIO pin(s) using GPIO_Init() + * Four possible configuration are available for each pin: + * - Input: Floating, Pull-up, Pull-down. + * - Output: Push-Pull (Pull-up, Pull-down or no Pull) + * Open Drain (Pull-up, Pull-down or no Pull). + * In output mode, the speed is configurable: 2 MHz, 25 MHz, + * 50 MHz or 100 MHz. + * - Alternate Function: Push-Pull (Pull-up, Pull-down or no Pull) + * Open Drain (Pull-up, Pull-down or no Pull). + * - Analog: required mode when a pin is to be used as ADC channel + * or DAC output. + * + * 3- Peripherals alternate function: + * - For ADC and DAC, configure the desired pin in analog mode using + * GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AN; + * - For other peripherals (TIM, USART...): + * - Connect the pin to the desired peripherals' Alternate + * Function (AF) using GPIO_PinAFConfig() function + * - Configure the desired pin in alternate function mode using + * GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF + * - Select the type, pull-up/pull-down and output speed via + * GPIO_PuPd, GPIO_OType and GPIO_Speed members + * - Call GPIO_Init() function + * + * 4. To get the level of a pin configured in input mode use GPIO_ReadInputDataBit() + * + * 5. To set/reset the level of a pin configured in output mode use + * GPIO_SetBits()/GPIO_ResetBits() + * + * 6. During and just after reset, the alternate functions are not + * active and the GPIO pins are configured in input floating mode + * (except JTAG pins). + * + * 7. The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as + * general-purpose (PC14 and PC15, respectively) when the LSE + * oscillator is off. The LSE has priority over the GPIO function. + * + * 8. The HSE oscillator pins OSC_IN/OSC_OUT can be used as + * general-purpose PH0 and PH1, respectively, when the HSE + * oscillator is off. The HSE has priority over the GPIO function. + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_gpio.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup GPIO + * @brief GPIO driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup GPIO_Private_Functions + * @{ + */ + +/** @defgroup GPIO_Group1 Initialization and Configuration + * @brief Initialization and Configuration + * +@verbatim + =============================================================================== + Initialization and Configuration + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the GPIOx peripheral registers to their default reset values. + * @note By default, The GPIO pins are configured in input floating mode (except JTAG pins). + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @retval None + */ +void GPIO_DeInit(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + if (GPIOx == GPIOA) + { + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOA, ENABLE); + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOA, DISABLE); + } + else if (GPIOx == GPIOB) + { + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOB, ENABLE); + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOB, DISABLE); + } + else if (GPIOx == GPIOC) + { + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOC, ENABLE); + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOC, DISABLE); + } + else if (GPIOx == GPIOD) + { + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOD, ENABLE); + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOD, DISABLE); + } + else if (GPIOx == GPIOE) + { + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOE, ENABLE); + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOE, DISABLE); + } + else if (GPIOx == GPIOF) + { + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOF, ENABLE); + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOF, DISABLE); + } + else if (GPIOx == GPIOG) + { + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOG, ENABLE); + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOG, DISABLE); + } + else if (GPIOx == GPIOH) + { + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOH, ENABLE); + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOH, DISABLE); + } + else + { + if (GPIOx == GPIOI) + { + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOI, ENABLE); + RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOI, DISABLE); + } + } +} + +/** + * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_InitStruct. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) +{ + uint32_t pinpos = 0x00, pos = 0x00 , currentpin = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); + assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); + assert_param(IS_GPIO_PUPD(GPIO_InitStruct->GPIO_PuPd)); + + /* -------------------------Configure the port pins---------------- */ + /*-- GPIO Mode Configuration --*/ + for (pinpos = 0x00; pinpos < 0x10; pinpos++) + { + pos = ((uint32_t)0x01) << pinpos; + /* Get the port pins position */ + currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; + + if (currentpin == pos) + { + GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (pinpos * 2)); + GPIOx->MODER |= (((uint32_t)GPIO_InitStruct->GPIO_Mode) << (pinpos * 2)); + + if ((GPIO_InitStruct->GPIO_Mode == GPIO_Mode_OUT) || (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_AF)) + { + /* Check Speed mode parameters */ + assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); + + /* Speed mode configuration */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (pinpos * 2)); + GPIOx->OSPEEDR |= ((uint32_t)(GPIO_InitStruct->GPIO_Speed) << (pinpos * 2)); + + /* Check Output mode parameters */ + assert_param(IS_GPIO_OTYPE(GPIO_InitStruct->GPIO_OType)); + + /* Output mode configuration*/ + GPIOx->OTYPER &= ~((GPIO_OTYPER_OT_0) << ((uint16_t)pinpos)) ; + GPIOx->OTYPER |= (uint16_t)(((uint16_t)GPIO_InitStruct->GPIO_OType) << ((uint16_t)pinpos)); + } + + /* Pull-up Pull down resistor configuration*/ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << ((uint16_t)pinpos * 2)); + GPIOx->PUPDR |= (((uint32_t)GPIO_InitStruct->GPIO_PuPd) << (pinpos * 2)); + } + } +} + +/** + * @brief Fills each GPIO_InitStruct member with its default value. + * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will be initialized. + * @retval None + */ +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN; + GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStruct->GPIO_OType = GPIO_OType_PP; + GPIO_InitStruct->GPIO_PuPd = GPIO_PuPd_NOPULL; +} + +/** + * @brief Locks GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be locked. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = 0x00010000; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + tmp |= GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Reset LCKK bit */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; +} + +/** + * @} + */ + +/** @defgroup GPIO_Group2 GPIO Read and Write + * @brief GPIO Read and Write + * +@verbatim + =============================================================================== + GPIO Read and Write + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO input data port. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @retval GPIO input data port value. + */ +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->IDR); +} + +/** + * @brief Reads the specified output data port bit. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The output port pin value. + */ +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO output data port. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @retval GPIO output data port value. + */ +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->ODR); +} + +/** + * @brief Sets the selected data port bits. + * @note This functions uses GPIOx_BSRR register to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BSRRL = GPIO_Pin; +} + +/** + * @brief Clears the selected data port bits. + * @note This functions uses GPIOx_BSRR register to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BSRRH = GPIO_Pin; +} + +/** + * @brief Sets or clears the selected data port bit. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_Pin_x where x can be (0..15). + * @param BitVal: specifies the value to be written to the selected bit. + * This parameter can be one of the BitAction enum values: + * @arg Bit_RESET: to clear the port pin + * @arg Bit_SET: to set the port pin + * @retval None + */ +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_BIT_ACTION(BitVal)); + + if (BitVal != Bit_RESET) + { + GPIOx->BSRRL = GPIO_Pin; + } + else + { + GPIOx->BSRRH = GPIO_Pin ; + } +} + +/** + * @brief Writes data to the specified GPIO data port. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param PortVal: specifies the value to be written to the port output data register. + * @retval None + */ +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + GPIOx->ODR = PortVal; +} + +/** + * @brief Toggles the specified GPIO pins.. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param GPIO_Pin: Specifies the pins to be toggled. + * @retval None + */ +void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + GPIOx->ODR ^= GPIO_Pin; +} + +/** + * @} + */ + +/** @defgroup GPIO_Group3 GPIO Alternate functions configuration function + * @brief GPIO Alternate functions configuration function + * +@verbatim + =============================================================================== + GPIO Alternate functions configuration function + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Changes the mapping of the specified pin. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral. + * @param GPIO_PinSource: specifies the pin for the Alternate function. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * @param GPIO_AFSelection: selects the pin to used as Alternate function. + * This parameter can be one of the following values: + * @arg GPIO_AF_RTC_50Hz: Connect RTC_50Hz pin to AF0 (default after reset) + * @arg GPIO_AF_MCO: Connect MCO pin (MCO1 and MCO2) to AF0 (default after reset) + * @arg GPIO_AF_TAMPER: Connect TAMPER pins (TAMPER_1 and TAMPER_2) to AF0 (default after reset) + * @arg GPIO_AF_SWJ: Connect SWJ pins (SWD and JTAG)to AF0 (default after reset) + * @arg GPIO_AF_TRACE: Connect TRACE pins to AF0 (default after reset) + * @arg GPIO_AF_TIM1: Connect TIM1 pins to AF1 + * @arg GPIO_AF_TIM2: Connect TIM2 pins to AF1 + * @arg GPIO_AF_TIM3: Connect TIM3 pins to AF2 + * @arg GPIO_AF_TIM4: Connect TIM4 pins to AF2 + * @arg GPIO_AF_TIM5: Connect TIM5 pins to AF2 + * @arg GPIO_AF_TIM8: Connect TIM8 pins to AF3 + * @arg GPIO_AF_TIM9: Connect TIM9 pins to AF3 + * @arg GPIO_AF_TIM10: Connect TIM10 pins to AF3 + * @arg GPIO_AF_TIM11: Connect TIM11 pins to AF3 + * @arg GPIO_AF_I2C1: Connect I2C1 pins to AF4 + * @arg GPIO_AF_I2C2: Connect I2C2 pins to AF4 + * @arg GPIO_AF_I2C3: Connect I2C3 pins to AF4 + * @arg GPIO_AF_SPI1: Connect SPI1 pins to AF5 + * @arg GPIO_AF_SPI2: Connect SPI2/I2S2 pins to AF5 + * @arg GPIO_AF_SPI3: Connect SPI3/I2S3 pins to AF6 + * @arg GPIO_AF_I2S3ext: Connect I2S3ext pins to AF7 + * @arg GPIO_AF_USART1: Connect USART1 pins to AF7 + * @arg GPIO_AF_USART2: Connect USART2 pins to AF7 + * @arg GPIO_AF_USART3: Connect USART3 pins to AF7 + * @arg GPIO_AF_UART4: Connect UART4 pins to AF8 + * @arg GPIO_AF_UART5: Connect UART5 pins to AF8 + * @arg GPIO_AF_USART6: Connect USART6 pins to AF8 + * @arg GPIO_AF_CAN1: Connect CAN1 pins to AF9 + * @arg GPIO_AF_CAN2: Connect CAN2 pins to AF9 + * @arg GPIO_AF_TIM12: Connect TIM12 pins to AF9 + * @arg GPIO_AF_TIM13: Connect TIM13 pins to AF9 + * @arg GPIO_AF_TIM14: Connect TIM14 pins to AF9 + * @arg GPIO_AF_OTG_FS: Connect OTG_FS pins to AF10 + * @arg GPIO_AF_OTG_HS: Connect OTG_HS pins to AF10 + * @arg GPIO_AF_ETH: Connect ETHERNET pins to AF11 + * @arg GPIO_AF_FSMC: Connect FSMC pins to AF12 + * @arg GPIO_AF_OTG_HS_FS: Connect OTG HS (configured in FS) pins to AF12 + * @arg GPIO_AF_SDIO: Connect SDIO pins to AF12 + * @arg GPIO_AF_DCMI: Connect DCMI pins to AF13 + * @arg GPIO_AF_EVENTOUT: Connect EVENTOUT pins to AF15 + * @retval None + */ +void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF) +{ + uint32_t temp = 0x00; + uint32_t temp_2 = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + assert_param(IS_GPIO_AF(GPIO_AF)); + + temp = ((uint32_t)(GPIO_AF) << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)) ; + GPIOx->AFR[GPIO_PinSource >> 0x03] &= ~((uint32_t)0xF << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)) ; + temp_2 = GPIOx->AFR[GPIO_PinSource >> 0x03] | temp; + GPIOx->AFR[GPIO_PinSource >> 0x03] = temp_2; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_gpio.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_gpio.h new file mode 100644 index 00000000000..3cb99e4b21a --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_gpio.h @@ -0,0 +1,406 @@ +/** + ****************************************************************************** + * @file stm32f4xx_gpio.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the GPIO firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_GPIO_H +#define __STM32F4xx_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ + ((PERIPH) == GPIOB) || \ + ((PERIPH) == GPIOC) || \ + ((PERIPH) == GPIOD) || \ + ((PERIPH) == GPIOE) || \ + ((PERIPH) == GPIOF) || \ + ((PERIPH) == GPIOG) || \ + ((PERIPH) == GPIOH) || \ + ((PERIPH) == GPIOI)) + +/** + * @brief GPIO Configuration Mode enumeration + */ +typedef enum +{ + GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */ + GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */ + GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */ + GPIO_Mode_AN = 0x03 /*!< GPIO Analog Mode */ +}GPIOMode_TypeDef; +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN) || ((MODE) == GPIO_Mode_OUT) || \ + ((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN)) + +/** + * @brief GPIO Output type enumeration + */ +typedef enum +{ + GPIO_OType_PP = 0x00, + GPIO_OType_OD = 0x01 +}GPIOOType_TypeDef; +#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD)) + + +/** + * @brief GPIO Output Maximum frequency enumeration + */ +typedef enum +{ + GPIO_Speed_2MHz = 0x00, /*!< Low speed */ + GPIO_Speed_25MHz = 0x01, /*!< Medium speed */ + GPIO_Speed_50MHz = 0x02, /*!< Fast speed */ + GPIO_Speed_100MHz = 0x03 /*!< High speed on 30 pF (80 MHz Output max speed on 15 pF) */ +}GPIOSpeed_TypeDef; +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_2MHz) || ((SPEED) == GPIO_Speed_25MHz) || \ + ((SPEED) == GPIO_Speed_50MHz)|| ((SPEED) == GPIO_Speed_100MHz)) + +/** + * @brief GPIO Configuration PullUp PullDown enumeration + */ +typedef enum +{ + GPIO_PuPd_NOPULL = 0x00, + GPIO_PuPd_UP = 0x01, + GPIO_PuPd_DOWN = 0x02 +}GPIOPuPd_TypeDef; +#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \ + ((PUPD) == GPIO_PuPd_DOWN)) + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + Bit_RESET = 0, + Bit_SET +}BitAction; +#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) + + +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIOMode_TypeDef */ + + GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIOSpeed_TypeDef */ + + GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIOOType_TypeDef */ + + GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIOPuPd_TypeDef */ +}GPIO_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Constants + * @{ + */ + +/** @defgroup GPIO_pins_define + * @{ + */ +#define GPIO_Pin_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_Pin_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_Pin_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_Pin_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_Pin_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_Pin_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_Pin_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_Pin_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_Pin_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_Pin_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_Pin_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_Pin_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_Pin_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_Pin_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_Pin_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_Pin_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_Pin_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00)) +#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ + ((PIN) == GPIO_Pin_1) || \ + ((PIN) == GPIO_Pin_2) || \ + ((PIN) == GPIO_Pin_3) || \ + ((PIN) == GPIO_Pin_4) || \ + ((PIN) == GPIO_Pin_5) || \ + ((PIN) == GPIO_Pin_6) || \ + ((PIN) == GPIO_Pin_7) || \ + ((PIN) == GPIO_Pin_8) || \ + ((PIN) == GPIO_Pin_9) || \ + ((PIN) == GPIO_Pin_10) || \ + ((PIN) == GPIO_Pin_11) || \ + ((PIN) == GPIO_Pin_12) || \ + ((PIN) == GPIO_Pin_13) || \ + ((PIN) == GPIO_Pin_14) || \ + ((PIN) == GPIO_Pin_15)) +/** + * @} + */ + + +/** @defgroup GPIO_Pin_sources + * @{ + */ +#define GPIO_PinSource0 ((uint8_t)0x00) +#define GPIO_PinSource1 ((uint8_t)0x01) +#define GPIO_PinSource2 ((uint8_t)0x02) +#define GPIO_PinSource3 ((uint8_t)0x03) +#define GPIO_PinSource4 ((uint8_t)0x04) +#define GPIO_PinSource5 ((uint8_t)0x05) +#define GPIO_PinSource6 ((uint8_t)0x06) +#define GPIO_PinSource7 ((uint8_t)0x07) +#define GPIO_PinSource8 ((uint8_t)0x08) +#define GPIO_PinSource9 ((uint8_t)0x09) +#define GPIO_PinSource10 ((uint8_t)0x0A) +#define GPIO_PinSource11 ((uint8_t)0x0B) +#define GPIO_PinSource12 ((uint8_t)0x0C) +#define GPIO_PinSource13 ((uint8_t)0x0D) +#define GPIO_PinSource14 ((uint8_t)0x0E) +#define GPIO_PinSource15 ((uint8_t)0x0F) + +#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ + ((PINSOURCE) == GPIO_PinSource1) || \ + ((PINSOURCE) == GPIO_PinSource2) || \ + ((PINSOURCE) == GPIO_PinSource3) || \ + ((PINSOURCE) == GPIO_PinSource4) || \ + ((PINSOURCE) == GPIO_PinSource5) || \ + ((PINSOURCE) == GPIO_PinSource6) || \ + ((PINSOURCE) == GPIO_PinSource7) || \ + ((PINSOURCE) == GPIO_PinSource8) || \ + ((PINSOURCE) == GPIO_PinSource9) || \ + ((PINSOURCE) == GPIO_PinSource10) || \ + ((PINSOURCE) == GPIO_PinSource11) || \ + ((PINSOURCE) == GPIO_PinSource12) || \ + ((PINSOURCE) == GPIO_PinSource13) || \ + ((PINSOURCE) == GPIO_PinSource14) || \ + ((PINSOURCE) == GPIO_PinSource15)) +/** + * @} + */ + +/** @defgroup GPIO_Alternat_function_selection_define + * @{ + */ +/** + * @brief AF 0 selection + */ +#define GPIO_AF_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ +#define GPIO_AF_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ +#define GPIO_AF_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ +#define GPIO_AF_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF_I2S3ext ((uint8_t)0x07) /* I2S3ext Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ +#define GPIO_AF_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ +#define GPIO_AF_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */ +#define GPIO_AF_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */ +#define GPIO_AF_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \ + ((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \ + ((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \ + ((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \ + ((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \ + ((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \ + ((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \ + ((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \ + ((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \ + ((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \ + ((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \ + ((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \ + ((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \ + ((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \ + ((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \ + ((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_FSMC) || \ + ((AF) == GPIO_AF_OTG_HS_FS) || ((AF) == GPIO_AF_SDIO) || \ + ((AF) == GPIO_AF_DCMI) || ((AF) == GPIO_AF_EVENTOUT)) +/** + * @} + */ + +/** @defgroup GPIO_Legacy + * @{ + */ + +#define GPIO_Mode_AIN GPIO_Mode_AN + +#define GPIO_AF_OTG1_FS GPIO_AF_OTG_FS +#define GPIO_AF_OTG2_HS GPIO_AF_OTG_HS +#define GPIO_AF_OTG2_FS GPIO_AF_OTG_HS_FS + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the GPIO configuration to the default reset state ****/ +void GPIO_DeInit(GPIO_TypeDef* GPIOx); + +/* Initialization and Configuration functions *********************************/ +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); + +/* GPIO Read and Write functions **********************************************/ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); +void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); + +/* GPIO Alternate functions configuration function ****************************/ +void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_GPIO_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_hash.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_hash.c new file mode 100644 index 00000000000..ff2f8df2940 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_hash.c @@ -0,0 +1,701 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hash.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the HASH / HMAC Processor (HASH) peripheral: + * - Initialization and Configuration functions + * - Message Digest generation functions + * - context swapping functions + * - DMA interface function + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * HASH operation : + * ---------------- + * 1. Enable the HASH controller clock using + * RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_HASH, ENABLE) function. + * + * 2. Initialise the HASH using HASH_Init() function. + * + * 3 . Reset the HASH processor core, so that the HASH will be ready + * to compute he message digest of a new message by using + * HASH_Reset() function. + * + * 4. Enable the HASH controller using the HASH_Cmd() function. + * + * 5. if using DMA for Data input transfer, Activate the DMA Request + * using HASH_DMACmd() function + * + * 6. if DMA is not used for data transfer, use HASH_DataIn() function + * to enter data to IN FIFO. + * + * + * 7. Configure the Number of valid bits in last word of the message + * using HASH_SetLastWordValidBitsNbr() function. + * + * 8. if the message length is not an exact multiple of 512 bits, + * then the function HASH_StartDigest() must be called to + * launch the computation of the final digest. + * + * 9. Once computed, the digest can be read using HASH_GetDigest() + * function. + * + * 10. To control HASH events you can use one of the following + * two methods: + * a- Check on HASH flags using the HASH_GetFlagStatus() function. + * b- Use HASH interrupts through the function HASH_ITConfig() at + * initialization phase and HASH_GetITStatus() function into + * interrupt routines in hashing phase. + * After checking on a flag you should clear it using HASH_ClearFlag() + * function. And after checking on an interrupt event you should + * clear it using HASH_ClearITPendingBit() function. + * + * 11. Save and restore hash processor context using + * HASH_SaveContext() and HASH_RestoreContext() functions. + * + * + * + * HMAC operation : + * ---------------- + * The HMAC algorithm is used for message authentication, by + * irreversibly binding the message being processed to a key chosen + * by the user. + * For HMAC specifications, refer to "HMAC: keyed-hashing for message + * authentication, H. Krawczyk, M. Bellare, R. Canetti, February 1997" + * + * Basically, the HMAC algorithm consists of two nested hash operations: + * HMAC(message) = Hash[((key | pad) XOR 0x5C) | Hash(((key | pad) XOR 0x36) | message)] + * where: + * - "pad" is a sequence of zeroes needed to extend the key to the + * length of the underlying hash function data block (that is + * 512 bits for both the SHA-1 and MD5 hash algorithms) + * - "|" represents the concatenation operator + * + * + * To compute the HMAC, four different phases are required: + * + * 1. Initialise the HASH using HASH_Init() function to do HMAC + * operation. + * + * 2. The key (to be used for the inner hash function) is then given + * to the core. This operation follows the same mechanism as the + * one used to send the message in the hash operation (that is, + * by HASH_DataIn() function and, finally, + * HASH_StartDigest() function. + * + * 3. Once the last word has been entered and computation has started, + * the hash processor elaborates the key. It is then ready to + * accept the message text using the same mechanism as the one + * used to send the message in the hash operation. + * + * 4. After the first hash round, the hash processor returns "ready" + * to indicate that it is ready to receive the key to be used for + * the outer hash function (normally, this key is the same as the + * one used for the inner hash function). When the last word of + * the key is entered and computation starts, the HMAC result is + * made available using HASH_GetDigest() function. + * + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_hash.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup HASH + * @brief HASH driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HASH_Private_Functions + * @{ + */ + +/** @defgroup HASH_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + This section provides functions allowing to + - Initialize the HASH peripheral + - Configure the HASH Processor + - MD5/SHA1, + - HASH/HMAC, + - datatype + - HMAC Key (if mode = HMAC) + - Reset the HASH Processor + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the HASH peripheral registers to their default reset values + * @param None + * @retval None + */ +void HASH_DeInit(void) +{ + /* Enable HASH reset state */ + RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_HASH, ENABLE); + /* Release HASH from reset state */ + RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_HASH, DISABLE); +} + +/** + * @brief Initializes the HASH peripheral according to the specified parameters + * in the HASH_InitStruct structure. + * @note the hash processor is reset when calling this function so that the + * HASH will be ready to compute the message digest of a new message. + * There is no need to call HASH_Reset() function. + * @param HASH_InitStruct: pointer to a HASH_InitTypeDef structure that contains + * the configuration information for the HASH peripheral. + * @note The field HASH_HMACKeyType in HASH_InitTypeDef must be filled only + * if the algorithm mode is HMAC. + * @retval None + */ +void HASH_Init(HASH_InitTypeDef* HASH_InitStruct) +{ + /* Check the parameters */ + assert_param(IS_HASH_ALGOSELECTION(HASH_InitStruct->HASH_AlgoSelection)); + assert_param(IS_HASH_DATATYPE(HASH_InitStruct->HASH_DataType)); + assert_param(IS_HASH_ALGOMODE(HASH_InitStruct->HASH_AlgoMode)); + + /* Configure the Algorithm used, algorithm mode and the datatype */ + HASH->CR &= ~ (HASH_CR_ALGO | HASH_CR_DATATYPE | HASH_CR_MODE); + HASH->CR |= (HASH_InitStruct->HASH_AlgoSelection | \ + HASH_InitStruct->HASH_DataType | \ + HASH_InitStruct->HASH_AlgoMode); + + /* if algorithm mode is HMAC, set the Key */ + if(HASH_InitStruct->HASH_AlgoMode == HASH_AlgoMode_HMAC) + { + assert_param(IS_HASH_HMAC_KEYTYPE(HASH_InitStruct->HASH_HMACKeyType)); + HASH->CR &= ~HASH_CR_LKEY; + HASH->CR |= HASH_InitStruct->HASH_HMACKeyType; + } + + /* Reset the HASH processor core, so that the HASH will be ready to compute + the message digest of a new message */ + HASH->CR |= HASH_CR_INIT; +} + +/** + * @brief Fills each HASH_InitStruct member with its default value. + * @param HASH_InitStruct : pointer to a HASH_InitTypeDef structure which will + * be initialized. + * @note The default values set are : Processor mode is HASH, Algorithm selected is SHA1, + * Data type selected is 32b and HMAC Key Type is short key. + * @retval None + */ +void HASH_StructInit(HASH_InitTypeDef* HASH_InitStruct) +{ + /* Initialize the HASH_AlgoSelection member */ + HASH_InitStruct->HASH_AlgoSelection = HASH_AlgoSelection_SHA1; + + /* Initialize the HASH_AlgoMode member */ + HASH_InitStruct->HASH_AlgoMode = HASH_AlgoMode_HASH; + + /* Initialize the HASH_DataType member */ + HASH_InitStruct->HASH_DataType = HASH_DataType_32b; + + /* Initialize the HASH_HMACKeyType member */ + HASH_InitStruct->HASH_HMACKeyType = HASH_HMACKeyType_ShortKey; +} + +/** + * @brief Resets the HASH processor core, so that the HASH will be ready + * to compute the message digest of a new message. + * @note Calling this function will clear the HASH_SR_DCIS (Digest calculation + * completion interrupt status) bit corresponding to HASH_IT_DCI + * interrupt and HASH_FLAG_DCIS flag. + * @param None + * @retval None + */ +void HASH_Reset(void) +{ + /* Reset the HASH processor core */ + HASH->CR |= HASH_CR_INIT; +} +/** + * @} + */ + +/** @defgroup HASH_Group2 Message Digest generation functions + * @brief Message Digest generation functions + * +@verbatim + =============================================================================== + Message Digest generation functions + =============================================================================== + This section provides functions allowing the generation of message digest: + - Push data in the IN FIFO : using HASH_DataIn() + - Get the number of words set in IN FIFO, use HASH_GetInFIFOWordsNbr() + - set the last word valid bits number using HASH_SetLastWordValidBitsNbr() + - start digest calculation : using HASH_StartDigest() + - Get the Digest message : using HASH_GetDigest() + +@endverbatim + * @{ + */ + + +/** + * @brief Configure the Number of valid bits in last word of the message + * @param ValidNumber: Number of valid bits in last word of the message. + * This parameter must be a number between 0 and 0x1F. + * - 0x00: All 32 bits of the last data written are valid + * - 0x01: Only bit [0] of the last data written is valid + * - 0x02: Only bits[1:0] of the last data written are valid + * - 0x03: Only bits[2:0] of the last data written are valid + * - ... + * - 0x1F: Only bits[30:0] of the last data written are valid + * @note The Number of valid bits must be set before to start the message + * digest competition (in Hash and HMAC) and key treatment(in HMAC). + * @retval None + */ +void HASH_SetLastWordValidBitsNbr(uint16_t ValidNumber) +{ + /* Check the parameters */ + assert_param(IS_HASH_VALIDBITSNUMBER(ValidNumber)); + + /* Configure the Number of valid bits in last word of the message */ + HASH->STR &= ~(HASH_STR_NBW); + HASH->STR |= ValidNumber; +} + +/** + * @brief Writes data in the Data Input FIFO + * @param Data: new data of the message to be processed. + * @retval None + */ +void HASH_DataIn(uint32_t Data) +{ + /* Write in the DIN register a new data */ + HASH->DIN = Data; +} + +/** + * @brief Returns the number of words already pushed into the IN FIFO. + * @param None + * @retval The value of words already pushed into the IN FIFO. + */ +uint8_t HASH_GetInFIFOWordsNbr(void) +{ + /* Return the value of NBW bits */ + return ((HASH->CR & HASH_CR_NBW) >> 8); +} + +/** + * @brief Provides the message digest result. + * @note In MD5 mode, Data[4] filed of HASH_MsgDigest structure is not used + * and is read as zero. + * @param HASH_MessageDigest: pointer to a HASH_MsgDigest structure which will + * hold the message digest result + * @retval None + */ +void HASH_GetDigest(HASH_MsgDigest* HASH_MessageDigest) +{ + /* Get the data field */ + HASH_MessageDigest->Data[0] = HASH->HR[0]; + HASH_MessageDigest->Data[1] = HASH->HR[1]; + HASH_MessageDigest->Data[2] = HASH->HR[2]; + HASH_MessageDigest->Data[3] = HASH->HR[3]; + HASH_MessageDigest->Data[4] = HASH->HR[4]; +} + +/** + * @brief Starts the message padding and calculation of the final message + * @param None + * @retval None + */ +void HASH_StartDigest(void) +{ + /* Start the Digest calculation */ + HASH->STR |= HASH_STR_DCAL; +} +/** + * @} + */ + +/** @defgroup HASH_Group3 Context swapping functions + * @brief Context swapping functions + * +@verbatim + =============================================================================== + Context swapping functions + =============================================================================== + + This section provides functions allowing to save and store HASH Context + + It is possible to interrupt a HASH/HMAC process to perform another processing + with a higher priority, and to complete the interrupted process later on, when + the higher priority task is complete. To do so, the context of the interrupted + task must be saved from the HASH registers to memory, and then be restored + from memory to the HASH registers. + + 1. To save the current context, use HASH_SaveContext() function + 2. To restore the saved context, use HASH_RestoreContext() function + + +@endverbatim + * @{ + */ + +/** + * @brief Save the Hash peripheral Context. + * @note The context can be saved only when no block is currently being + * processed. So user must wait for DINIS = 1 (the last block has been + * processed and the input FIFO is empty) or NBW != 0 (the FIFO is not + * full and no processing is ongoing). + * @param HASH_ContextSave: pointer to a HASH_Context structure that contains + * the repository for current context. + * @retval None + */ +void HASH_SaveContext(HASH_Context* HASH_ContextSave) +{ + uint8_t i = 0; + + /* save context registers */ + HASH_ContextSave->HASH_IMR = HASH->IMR; + HASH_ContextSave->HASH_STR = HASH->STR; + HASH_ContextSave->HASH_CR = HASH->CR; + for(i=0; i<=50;i++) + { + HASH_ContextSave->HASH_CSR[i] = HASH->CSR[i]; + } +} + +/** + * @brief Restore the Hash peripheral Context. + * @note After calling this function, user can restart the processing from the + * point where it has been interrupted. + * @param HASH_ContextRestore: pointer to a HASH_Context structure that contains + * the repository for saved context. + * @retval None + */ +void HASH_RestoreContext(HASH_Context* HASH_ContextRestore) +{ + uint8_t i = 0; + + /* restore context registers */ + HASH->IMR = HASH_ContextRestore->HASH_IMR; + HASH->STR = HASH_ContextRestore->HASH_STR; + HASH->CR = HASH_ContextRestore->HASH_CR; + + /* Initialize the hash processor */ + HASH->CR |= HASH_CR_INIT; + + /* continue restoring context registers */ + for(i=0; i<=50;i++) + { + HASH->CSR[i] = HASH_ContextRestore->HASH_CSR[i]; + } +} +/** + * @} + */ + +/** @defgroup HASH_Group4 HASH's DMA interface Configuration function + * @brief HASH's DMA interface Configuration function + * +@verbatim + =============================================================================== + HASH's DMA interface Configuration function + =============================================================================== + + This section provides functions allowing to configure the DMA interface for + HASH/ HMAC data input transfer. + + When the DMA mode is enabled (using the HASH_DMACmd() function), data can be + sent to the IN FIFO using the DMA peripheral. + + + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the HASH DMA interface. + * @note The DMA is disabled by hardware after the end of transfer. + * @param NewState: new state of the selected HASH DMA transfer request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void HASH_DMACmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the HASH DMA request */ + HASH->CR |= HASH_CR_DMAE; + } + else + { + /* Disable the HASH DMA request */ + HASH->CR &= ~HASH_CR_DMAE; + } +} +/** + * @} + */ + +/** @defgroup HASH_Group5 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + + This section provides functions allowing to configure the HASH Interrupts and + to get the status and clear flags and Interrupts pending bits. + + The HASH provides 2 Interrupts sources and 5 Flags: + + Flags : + ---------- + 1. HASH_FLAG_DINIS : set when 16 locations are free in the Data IN FIFO + which means that a new block (512 bit) can be entered + into the input buffer. + + 2. HASH_FLAG_DCIS : set when Digest calculation is complete + + 3. HASH_FLAG_DMAS : set when HASH's DMA interface is enabled (DMAE=1) or + a transfer is ongoing. + This Flag is cleared only by hardware. + + 4. HASH_FLAG_BUSY : set when The hash core is processing a block of data + This Flag is cleared only by hardware. + + 5. HASH_FLAG_DINNE : set when Data IN FIFO is not empty which means that + the Data IN FIFO contains at least one word of data. + This Flag is cleared only by hardware. + + Interrupts : + ------------ + + 1. HASH_IT_DINI : if enabled, this interrupt source is pending when 16 + locations are free in the Data IN FIFO which means that + a new block (512 bit) can be entered into the input buffer. + This interrupt source is cleared using + HASH_ClearITPendingBit(HASH_IT_DINI) function. + + 2. HASH_IT_DCI : if enabled, this interrupt source is pending when Digest + calculation is complete. + This interrupt source is cleared using + HASH_ClearITPendingBit(HASH_IT_DCI) function. + + Managing the HASH controller events : + ------------------------------------ + The user should identify which mode will be used in his application to manage + the HASH controller events: Polling mode or Interrupt mode. + + 1. In the Polling Mode it is advised to use the following functions: + - HASH_GetFlagStatus() : to check if flags events occur. + - HASH_ClearFlag() : to clear the flags events. + + 2. In the Interrupt Mode it is advised to use the following functions: + - HASH_ITConfig() : to enable or disable the interrupt source. + - HASH_GetITStatus() : to check if Interrupt occurs. + - HASH_ClearITPendingBit() : to clear the Interrupt pending Bit + (corresponding Flag). + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified HASH interrupts. + * @param HASH_IT: specifies the HASH interrupt source to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg HASH_IT_DINI: Data Input interrupt + * @arg HASH_IT_DCI: Digest Calculation Completion Interrupt + * @param NewState: new state of the specified HASH interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void HASH_ITConfig(uint8_t HASH_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_HASH_IT(HASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected HASH interrupt */ + HASH->IMR |= HASH_IT; + } + else + { + /* Disable the selected HASH interrupt */ + HASH->IMR &= (uint8_t) ~HASH_IT; + } +} + +/** + * @brief Checks whether the specified HASH flag is set or not. + * @param HASH_FLAG: specifies the HASH flag to check. + * This parameter can be one of the following values: + * @arg HASH_FLAG_DINIS: Data input interrupt status flag + * @arg HASH_FLAG_DCIS: Digest calculation completion interrupt status flag + * @arg HASH_FLAG_BUSY: Busy flag + * @arg HASH_FLAG_DMAS: DMAS Status flag + * @arg HASH_FLAG_DINNE: Data Input register (DIN) not empty status flag + * @retval The new state of HASH_FLAG (SET or RESET) + */ +FlagStatus HASH_GetFlagStatus(uint16_t HASH_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tempreg = 0; + + /* Check the parameters */ + assert_param(IS_HASH_GET_FLAG(HASH_FLAG)); + + /* check if the FLAG is in CR register */ + if ((HASH_FLAG & HASH_FLAG_DINNE) != (uint16_t)RESET ) + { + tempreg = HASH->CR; + } + else /* The FLAG is in SR register */ + { + tempreg = HASH->SR; + } + + /* Check the status of the specified HASH flag */ + if ((tempreg & HASH_FLAG) != (uint16_t)RESET) + { + /* HASH is set */ + bitstatus = SET; + } + else + { + /* HASH_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the HASH_FLAG status */ + return bitstatus; +} +/** + * @brief Clears the HASH flags. + * @param HASH_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg HASH_FLAG_DINIS: Data Input Flag + * @arg HASH_FLAG_DCIS: Digest Calculation Completion Flag + * @retval None + */ +void HASH_ClearFlag(uint16_t HASH_FLAG) +{ + /* Check the parameters */ + assert_param(IS_HASH_CLEAR_FLAG(HASH_FLAG)); + + /* Clear the selected HASH flags */ + HASH->SR = ~(uint32_t)HASH_FLAG; +} +/** + * @brief Checks whether the specified HASH interrupt has occurred or not. + * @param HASH_IT: specifies the HASH interrupt source to check. + * This parameter can be one of the following values: + * @arg HASH_IT_DINI: Data Input interrupt + * @arg HASH_IT_DCI: Digest Calculation Completion Interrupt + * @retval The new state of HASH_IT (SET or RESET). + */ +ITStatus HASH_GetITStatus(uint8_t HASH_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_HASH_GET_IT(HASH_IT)); + + + /* Check the status of the specified HASH interrupt */ + tmpreg = HASH->SR; + + if (((HASH->IMR & tmpreg) & HASH_IT) != RESET) + { + /* HASH_IT is set */ + bitstatus = SET; + } + else + { + /* HASH_IT is reset */ + bitstatus = RESET; + } + /* Return the HASH_IT status */ + return bitstatus; +} + +/** + * @brief Clears the HASH interrupt pending bit(s). + * @param HASH_IT: specifies the HASH interrupt pending bit(s) to clear. + * This parameter can be any combination of the following values: + * @arg HASH_IT_DINI: Data Input interrupt + * @arg HASH_IT_DCI: Digest Calculation Completion Interrupt + * @retval None + */ +void HASH_ClearITPendingBit(uint8_t HASH_IT) +{ + /* Check the parameters */ + assert_param(IS_HASH_IT(HASH_IT)); + + /* Clear the selected HASH interrupt pending bit */ + HASH->SR = (uint8_t)~HASH_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_hash.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_hash.h new file mode 100644 index 00000000000..23d07110dfb --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_hash.h @@ -0,0 +1,244 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hash.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the HASH + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HASH_H +#define __STM32F4xx_HASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup HASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HASH Init structure definition + */ +typedef struct +{ + uint32_t HASH_AlgoSelection; /*!< SHA-1 or MD5. This parameter can be a value + of @ref HASH_Algo_Selection */ + uint32_t HASH_AlgoMode; /*!< HASH or HMAC. This parameter can be a value + of @ref HASH_processor_Algorithm_Mode */ + uint32_t HASH_DataType; /*!< 32-bit data, 16-bit data, 8-bit data or + bit-string. This parameter can be a value of + @ref HASH_Data_Type */ + uint32_t HASH_HMACKeyType; /*!< HMAC Short key or HMAC Long Key. This parameter + can be a value of @ref HASH_HMAC_Long_key_only_for_HMAC_mode */ +}HASH_InitTypeDef; + +/** + * @brief HASH message digest result structure definition + */ +typedef struct +{ + uint32_t Data[5]; /*!< Message digest result : 5x 32bit words for SHA1 or + 4x 32bit words for MD5 */ +} HASH_MsgDigest; + +/** + * @brief HASH context swapping structure definition + */ +typedef struct +{ + uint32_t HASH_IMR; + uint32_t HASH_STR; + uint32_t HASH_CR; + uint32_t HASH_CSR[51]; +}HASH_Context; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HASH_Exported_Constants + * @{ + */ + +/** @defgroup HASH_Algo_Selection + * @{ + */ +#define HASH_AlgoSelection_SHA1 ((uint16_t)0x0000) /*!< HASH function is SHA1 */ +#define HASH_AlgoSelection_MD5 ((uint16_t)0x0080) /*!< HASH function is MD5 */ + +#define IS_HASH_ALGOSELECTION(ALGOSELECTION) (((ALGOSELECTION) == HASH_AlgoSelection_SHA1) || \ + ((ALGOSELECTION) == HASH_AlgoSelection_MD5)) +/** + * @} + */ + +/** @defgroup HASH_processor_Algorithm_Mode + * @{ + */ +#define HASH_AlgoMode_HASH ((uint16_t)0x0000) /*!< Algorithm is HASH */ +#define HASH_AlgoMode_HMAC ((uint16_t)0x0040) /*!< Algorithm is HMAC */ + +#define IS_HASH_ALGOMODE(ALGOMODE) (((ALGOMODE) == HASH_AlgoMode_HASH) || \ + ((ALGOMODE) == HASH_AlgoMode_HMAC)) +/** + * @} + */ + +/** @defgroup HASH_Data_Type + * @{ + */ +#define HASH_DataType_32b ((uint16_t)0x0000) +#define HASH_DataType_16b ((uint16_t)0x0010) +#define HASH_DataType_8b ((uint16_t)0x0020) +#define HASH_DataType_1b ((uint16_t)0x0030) + +#define IS_HASH_DATATYPE(DATATYPE) (((DATATYPE) == HASH_DataType_32b)|| \ + ((DATATYPE) == HASH_DataType_16b)|| \ + ((DATATYPE) == HASH_DataType_8b)|| \ + ((DATATYPE) == HASH_DataType_1b)) +/** + * @} + */ + +/** @defgroup HASH_HMAC_Long_key_only_for_HMAC_mode + * @{ + */ +#define HASH_HMACKeyType_ShortKey ((uint32_t)0x00000000) /*!< HMAC Key is <= 64 bytes */ +#define HASH_HMACKeyType_LongKey ((uint32_t)0x00010000) /*!< HMAC Key is > 64 bytes */ + +#define IS_HASH_HMAC_KEYTYPE(KEYTYPE) (((KEYTYPE) == HASH_HMACKeyType_ShortKey) || \ + ((KEYTYPE) == HASH_HMACKeyType_LongKey)) +/** + * @} + */ + +/** @defgroup Number_of_valid_bits_in_last_word_of_the_message + * @{ + */ +#define IS_HASH_VALIDBITSNUMBER(VALIDBITS) ((VALIDBITS) <= 0x1F) + +/** + * @} + */ + +/** @defgroup HASH_interrupts_definition + * @{ + */ +#define HASH_IT_DINI ((uint8_t)0x01) /*!< A new block can be entered into the input buffer (DIN)*/ +#define HASH_IT_DCI ((uint8_t)0x02) /*!< Digest calculation complete */ + +#define IS_HASH_IT(IT) ((((IT) & (uint8_t)0xFC) == 0x00) && ((IT) != 0x00)) +#define IS_HASH_GET_IT(IT) (((IT) == HASH_IT_DINI) || ((IT) == HASH_IT_DCI)) + +/** + * @} + */ + +/** @defgroup HASH_flags_definition + * @{ + */ +#define HASH_FLAG_DINIS ((uint16_t)0x0001) /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer.*/ +#define HASH_FLAG_DCIS ((uint16_t)0x0002) /*!< Digest calculation complete */ +#define HASH_FLAG_DMAS ((uint16_t)0x0004) /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */ +#define HASH_FLAG_BUSY ((uint16_t)0x0008) /*!< The hash core is Busy : processing a block of data */ +#define HASH_FLAG_DINNE ((uint16_t)0x1000) /*!< DIN not empty : The input buffer contains at least one word of data */ + +#define IS_HASH_GET_FLAG(FLAG) (((FLAG) == HASH_FLAG_DINIS) || \ + ((FLAG) == HASH_FLAG_DCIS) || \ + ((FLAG) == HASH_FLAG_DMAS) || \ + ((FLAG) == HASH_FLAG_BUSY) || \ + ((FLAG) == HASH_FLAG_DINNE)) + +#define IS_HASH_CLEAR_FLAG(FLAG)(((FLAG) == HASH_FLAG_DINIS) || \ + ((FLAG) == HASH_FLAG_DCIS)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the HASH configuration to the default reset state ****/ +void HASH_DeInit(void); + +/* HASH Configuration function ************************************************/ +void HASH_Init(HASH_InitTypeDef* HASH_InitStruct); +void HASH_StructInit(HASH_InitTypeDef* HASH_InitStruct); +void HASH_Reset(void); + +/* HASH Message Digest generation functions ***********************************/ +void HASH_DataIn(uint32_t Data); +uint8_t HASH_GetInFIFOWordsNbr(void); +void HASH_SetLastWordValidBitsNbr(uint16_t ValidNumber); +void HASH_StartDigest(void); +void HASH_GetDigest(HASH_MsgDigest* HASH_MessageDigest); + +/* HASH Context swapping functions ********************************************/ +void HASH_SaveContext(HASH_Context* HASH_ContextSave); +void HASH_RestoreContext(HASH_Context* HASH_ContextRestore); + +/* HASH's DMA interface function **********************************************/ +void HASH_DMACmd(FunctionalState NewState); + +/* HASH Interrupts and flags management functions *****************************/ +void HASH_ITConfig(uint8_t HASH_IT, FunctionalState NewState); +FlagStatus HASH_GetFlagStatus(uint16_t HASH_FLAG); +void HASH_ClearFlag(uint16_t HASH_FLAG); +ITStatus HASH_GetITStatus(uint8_t HASH_IT); +void HASH_ClearITPendingBit(uint8_t HASH_IT); + +/* High Level SHA1 functions **************************************************/ +ErrorStatus HASH_SHA1(uint8_t *Input, uint32_t Ilen, uint8_t Output[20]); +ErrorStatus HMAC_SHA1(uint8_t *Key, uint32_t Keylen, + uint8_t *Input, uint32_t Ilen, + uint8_t Output[20]); + +/* High Level MD5 functions ***************************************************/ +ErrorStatus HASH_MD5(uint8_t *Input, uint32_t Ilen, uint8_t Output[16]); +ErrorStatus HMAC_MD5(uint8_t *Key, uint32_t Keylen, + uint8_t *Input, uint32_t Ilen, + uint8_t Output[16]); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_HASH_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_hash_md5.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_hash_md5.c new file mode 100644 index 00000000000..40e850a4427 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_hash_md5.c @@ -0,0 +1,314 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hash_md5.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides high level functions to compute the HASH MD5 and + * HMAC MD5 Digest of an input message. + * It uses the stm32f4xx_hash.c/.h drivers to access the STM32F4xx HASH + * peripheral. + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. Enable The HASH controller clock using + * RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_HASH, ENABLE); function. + * + * 2. Calculate the HASH MD5 Digest using HASH_MD5() function. + * + * 3. Calculate the HMAC MD5 Digest using HMAC_MD5() function. + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hash.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup HASH + * @brief HASH driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define MD5BUSY_TIMEOUT ((uint32_t) 0x00010000) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HASH_Private_Functions + * @{ + */ + +/** @defgroup HASH_Group7 High Level MD5 functions + * @brief High Level MD5 Hash and HMAC functions + * +@verbatim + =============================================================================== + High Level MD5 Hash and HMAC functions + =============================================================================== + + +@endverbatim + * @{ + */ + +/** + * @brief Compute the HASH MD5 digest. + * @param Input: pointer to the Input buffer to be treated. + * @param Ilen: length of the Input buffer. + * @param Output: the returned digest + * @retval An ErrorStatus enumeration value: + * - SUCCESS: digest computation done + * - ERROR: digest computation failed + */ +ErrorStatus HASH_MD5(uint8_t *Input, uint32_t Ilen, uint8_t Output[16]) +{ + HASH_InitTypeDef MD5_HASH_InitStructure; + HASH_MsgDigest MD5_MessageDigest; + __IO uint16_t nbvalidbitsdata = 0; + uint32_t i = 0; + __IO uint32_t counter = 0; + uint32_t busystatus = 0; + ErrorStatus status = SUCCESS; + uint32_t inputaddr = (uint32_t)Input; + uint32_t outputaddr = (uint32_t)Output; + + + /* Number of valid bits in last word of the Input data */ + nbvalidbitsdata = 8 * (Ilen % 4); + + /* HASH peripheral initialization */ + HASH_DeInit(); + + /* HASH Configuration */ + MD5_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_MD5; + MD5_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HASH; + MD5_HASH_InitStructure.HASH_DataType = HASH_DataType_8b; + HASH_Init(&MD5_HASH_InitStructure); + + /* Configure the number of valid bits in last word of the data */ + HASH_SetLastWordValidBitsNbr(nbvalidbitsdata); + + /* Write the Input block in the IN FIFO */ + for(i=0; i 64) + { + /* HMAC long Key */ + MD5_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_LongKey; + } + else + { + /* HMAC short Key */ + MD5_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_ShortKey; + } + HASH_Init(&MD5_HASH_InitStructure); + + /* Configure the number of valid bits in last word of the Key */ + HASH_SetLastWordValidBitsNbr(nbvalidbitskey); + + /* Write the Key */ + for(i=0; i
© COPYRIGHT 2011 STMicroelectronics
+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hash.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup HASH + * @brief HASH driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define SHA1BUSY_TIMEOUT ((uint32_t) 0x00010000) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HASH_Private_Functions + * @{ + */ + +/** @defgroup HASH_Group6 High Level SHA1 functions + * @brief High Level SHA1 Hash and HMAC functions + * +@verbatim + =============================================================================== + High Level SHA1 Hash and HMAC functions + =============================================================================== + + +@endverbatim + * @{ + */ + +/** + * @brief Compute the HASH SHA1 digest. + * @param Input: pointer to the Input buffer to be treated. + * @param Ilen: length of the Input buffer. + * @param Output: the returned digest + * @retval An ErrorStatus enumeration value: + * - SUCCESS: digest computation done + * - ERROR: digest computation failed + */ +ErrorStatus HASH_SHA1(uint8_t *Input, uint32_t Ilen, uint8_t Output[20]) +{ + HASH_InitTypeDef SHA1_HASH_InitStructure; + HASH_MsgDigest SHA1_MessageDigest; + __IO uint16_t nbvalidbitsdata = 0; + uint32_t i = 0; + __IO uint32_t counter = 0; + uint32_t busystatus = 0; + ErrorStatus status = SUCCESS; + uint32_t inputaddr = (uint32_t)Input; + uint32_t outputaddr = (uint32_t)Output; + + /* Number of valid bits in last word of the Input data */ + nbvalidbitsdata = 8 * (Ilen % 4); + + /* HASH peripheral initialization */ + HASH_DeInit(); + + /* HASH Configuration */ + SHA1_HASH_InitStructure.HASH_AlgoSelection = HASH_AlgoSelection_SHA1; + SHA1_HASH_InitStructure.HASH_AlgoMode = HASH_AlgoMode_HASH; + SHA1_HASH_InitStructure.HASH_DataType = HASH_DataType_8b; + HASH_Init(&SHA1_HASH_InitStructure); + + /* Configure the number of valid bits in last word of the data */ + HASH_SetLastWordValidBitsNbr(nbvalidbitsdata); + + /* Write the Input block in the IN FIFO */ + for(i=0; i 64) + { + /* HMAC long Key */ + SHA1_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_LongKey; + } + else + { + /* HMAC short Key */ + SHA1_HASH_InitStructure.HASH_HMACKeyType = HASH_HMACKeyType_ShortKey; + } + HASH_Init(&SHA1_HASH_InitStructure); + + /* Configure the number of valid bits in last word of the Key */ + HASH_SetLastWordValidBitsNbr(nbvalidbitskey); + + /* Write the Key */ + for(i=0; iGPIO_Mode = GPIO_Mode_AF + * - Select the type, pull-up/pull-down and output speed via + * GPIO_PuPd, GPIO_OType and GPIO_Speed members + * - Call GPIO_Init() function + * Recommended configuration is Push-Pull, Pull-up, Open-Drain. + * Add an external pull up if necessary (typically 4.7 KOhm). + * + * 4. Program the Mode, duty cycle , Own address, Ack, Speed and Acknowledged + * Address using the I2C_Init() function. + * + * 5. Optionally you can enable/configure the following parameters without + * re-initialization (i.e there is no need to call again I2C_Init() function): + * - Enable the acknowledge feature using I2C_AcknowledgeConfig() function + * - Enable the dual addressing mode using I2C_DualAddressCmd() function + * - Enable the general call using the I2C_GeneralCallCmd() function + * - Enable the clock stretching using I2C_StretchClockCmd() function + * - Enable the fast mode duty cycle using the I2C_FastModeDutyCycleConfig() + * function. + * - Configure the NACK position for Master Receiver mode in case of + * 2 bytes reception using the function I2C_NACKPositionConfig(). + * - Enable the PEC Calculation using I2C_CalculatePEC() function + * - For SMBus Mode: + * - Enable the Address Resolution Protocol (ARP) using I2C_ARPCmd() function + * - Configure the SMBusAlert pin using I2C_SMBusAlertConfig() function + * + * 6. Enable the NVIC and the corresponding interrupt using the function + * I2C_ITConfig() if you need to use interrupt mode. + * + * 7. When using the DMA mode + * - Configure the DMA using DMA_Init() function + * - Active the needed channel Request using I2C_DMACmd() or + * I2C_DMALastTransferCmd() function. + * @note When using DMA mode, I2C interrupts may be used at the same time to + * control the communication flow (Start/Stop/Ack... events and errors). + * + * 8. Enable the I2C using the I2C_Cmd() function. + * + * 9. Enable the DMA using the DMA_Cmd() function when using DMA mode in the + * transfers. + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_i2c.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup I2C + * @brief I2C driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +#define CR1_CLEAR_MASK ((uint16_t)0xFBF5) /*I2C_ClockSpeed)); + assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); + assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle)); + assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); + assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack)); + assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); + +/*---------------------------- I2Cx CR2 Configuration ------------------------*/ + /* Get the I2Cx CR2 value */ + tmpreg = I2Cx->CR2; + /* Clear frequency FREQ[5:0] bits */ + tmpreg &= (uint16_t)~((uint16_t)I2C_CR2_FREQ); + /* Get pclk1 frequency value */ + RCC_GetClocksFreq(&rcc_clocks); + pclk1 = rcc_clocks.PCLK1_Frequency; + /* Set frequency bits depending on pclk1 value */ + freqrange = (uint16_t)(pclk1 / 1000000); + tmpreg |= freqrange; + /* Write to I2Cx CR2 */ + I2Cx->CR2 = tmpreg; + +/*---------------------------- I2Cx CCR Configuration ------------------------*/ + /* Disable the selected I2C peripheral to configure TRISE */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_PE); + /* Reset tmpreg value */ + /* Clear F/S, DUTY and CCR[11:0] bits */ + tmpreg = 0; + + /* Configure speed in standard mode */ + if (I2C_InitStruct->I2C_ClockSpeed <= 100000) + { + /* Standard mode speed calculate */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); + /* Test if CCR value is under 0x4*/ + if (result < 0x04) + { + /* Set minimum allowed value */ + result = 0x04; + } + /* Set speed value for standard mode */ + tmpreg |= result; + /* Set Maximum Rise Time for standard mode */ + I2Cx->TRISE = freqrange + 1; + } + /* Configure speed in fast mode */ + /* To use the I2C at 400 KHz (in fast mode), the PCLK1 frequency (I2C peripheral + input clock) must be a multiple of 10 MHz */ + else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/ + { + if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) + { + /* Fast mode speed calculate: Tlow/Thigh = 2 */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); + } + else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/ + { + /* Fast mode speed calculate: Tlow/Thigh = 16/9 */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); + /* Set DUTY bit */ + result |= I2C_DutyCycle_16_9; + } + + /* Test if CCR value is under 0x1*/ + if ((result & I2C_CCR_CCR) == 0) + { + /* Set minimum allowed value */ + result |= (uint16_t)0x0001; + } + /* Set speed value and set F/S bit for fast mode */ + tmpreg |= (uint16_t)(result | I2C_CCR_FS); + /* Set Maximum Rise Time for fast mode */ + I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1); + } + + /* Write to I2Cx CCR */ + I2Cx->CCR = tmpreg; + /* Enable the selected I2C peripheral */ + I2Cx->CR1 |= I2C_CR1_PE; + +/*---------------------------- I2Cx CR1 Configuration ------------------------*/ + /* Get the I2Cx CR1 value */ + tmpreg = I2Cx->CR1; + /* Clear ACK, SMBTYPE and SMBUS bits */ + tmpreg &= CR1_CLEAR_MASK; + /* Configure I2Cx: mode and acknowledgement */ + /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */ + /* Set ACK bit according to I2C_Ack value */ + tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); + /* Write to I2Cx CR1 */ + I2Cx->CR1 = tmpreg; + +/*---------------------------- I2Cx OAR1 Configuration -----------------------*/ + /* Set I2Cx Own Address1 and acknowledged address */ + I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); +} + +/** + * @brief Fills each I2C_InitStruct member with its default value. + * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) +{ +/*---------------- Reset I2C init structure parameters values ----------------*/ + /* initialize the I2C_ClockSpeed member */ + I2C_InitStruct->I2C_ClockSpeed = 5000; + /* Initialize the I2C_Mode member */ + I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; + /* Initialize the I2C_DutyCycle member */ + I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; + /* Initialize the I2C_OwnAddress1 member */ + I2C_InitStruct->I2C_OwnAddress1 = 0; + /* Initialize the I2C_Ack member */ + I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; + /* Initialize the I2C_AcknowledgedAddress member */ + I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; +} + +/** + * @brief Enables or disables the specified I2C peripheral. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2Cx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C peripheral */ + I2Cx->CR1 |= I2C_CR1_PE; + } + else + { + /* Disable the selected I2C peripheral */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_PE); + } +} + +/** + * @brief Generates I2Cx communication START condition. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2C START condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Generate a START condition */ + I2Cx->CR1 |= I2C_CR1_START; + } + else + { + /* Disable the START condition generation */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_START); + } +} + +/** + * @brief Generates I2Cx communication STOP condition. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2C STOP condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Generate a STOP condition */ + I2Cx->CR1 |= I2C_CR1_STOP; + } + else + { + /* Disable the STOP condition generation */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_STOP); + } +} + +/** + * @brief Transmits the address byte to select the slave device. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param Address: specifies the slave address which will be transmitted + * @param I2C_Direction: specifies whether the I2C device will be a Transmitter + * or a Receiver. + * This parameter can be one of the following values + * @arg I2C_Direction_Transmitter: Transmitter mode + * @arg I2C_Direction_Receiver: Receiver mode + * @retval None. + */ +void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_DIRECTION(I2C_Direction)); + /* Test on the direction to set/reset the read/write bit */ + if (I2C_Direction != I2C_Direction_Transmitter) + { + /* Set the address bit0 for read */ + Address |= I2C_OAR1_ADD0; + } + else + { + /* Reset the address bit0 for write */ + Address &= (uint8_t)~((uint8_t)I2C_OAR1_ADD0); + } + /* Send the address */ + I2Cx->DR = Address; +} + +/** + * @brief Enables or disables the specified I2C acknowledge feature. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2C Acknowledgement. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the acknowledgement */ + I2Cx->CR1 |= I2C_CR1_ACK; + } + else + { + /* Disable the acknowledgement */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_ACK); + } +} + +/** + * @brief Configures the specified I2C own address2. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param Address: specifies the 7bit I2C own address2. + * @retval None. + */ +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address) +{ + uint16_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Get the old register value */ + tmpreg = I2Cx->OAR2; + + /* Reset I2Cx Own address2 bit [7:1] */ + tmpreg &= (uint16_t)~((uint16_t)I2C_OAR2_ADD2); + + /* Set I2Cx Own address2 */ + tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE); + + /* Store the new register value */ + I2Cx->OAR2 = tmpreg; +} + +/** + * @brief Enables or disables the specified I2C dual addressing mode. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2C dual addressing mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable dual addressing mode */ + I2Cx->OAR2 |= I2C_OAR2_ENDUAL; + } + else + { + /* Disable dual addressing mode */ + I2Cx->OAR2 &= (uint16_t)~((uint16_t)I2C_OAR2_ENDUAL); + } +} + +/** + * @brief Enables or disables the specified I2C general call feature. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2C General call. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable generall call */ + I2Cx->CR1 |= I2C_CR1_ENGC; + } + else + { + /* Disable generall call */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_ENGC); + } +} + +/** + * @brief Enables or disables the specified I2C software reset. + * @note When software reset is enabled, the I2C IOs are released (this can + * be useful to recover from bus errors). + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2C software reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Peripheral under reset */ + I2Cx->CR1 |= I2C_CR1_SWRST; + } + else + { + /* Peripheral not under reset */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_SWRST); + } +} + +/** + * @brief Enables or disables the specified I2C Clock stretching. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2Cx Clock stretching. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState == DISABLE) + { + /* Enable the selected I2C Clock stretching */ + I2Cx->CR1 |= I2C_CR1_NOSTRETCH; + } + else + { + /* Disable the selected I2C Clock stretching */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_NOSTRETCH); + } +} + +/** + * @brief Selects the specified I2C fast mode duty cycle. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_DutyCycle: specifies the fast mode duty cycle. + * This parameter can be one of the following values: + * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2 + * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9 + * @retval None + */ +void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle)); + if (I2C_DutyCycle != I2C_DutyCycle_16_9) + { + /* I2C fast mode Tlow/Thigh=2 */ + I2Cx->CCR &= I2C_DutyCycle_2; + } + else + { + /* I2C fast mode Tlow/Thigh=16/9 */ + I2Cx->CCR |= I2C_DutyCycle_16_9; + } +} + +/** + * @brief Selects the specified I2C NACK position in master receiver mode. + * @note This function is useful in I2C Master Receiver mode when the number + * of data to be received is equal to 2. In this case, this function + * should be called (with parameter I2C_NACKPosition_Next) before data + * reception starts,as described in the 2-byte reception procedure + * recommended in Reference Manual in Section: Master receiver. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_NACKPosition: specifies the NACK position. + * This parameter can be one of the following values: + * @arg I2C_NACKPosition_Next: indicates that the next byte will be the last + * received byte. + * @arg I2C_NACKPosition_Current: indicates that current byte is the last + * received byte. + * + * @note This function configures the same bit (POS) as I2C_PECPositionConfig() + * but is intended to be used in I2C mode while I2C_PECPositionConfig() + * is intended to used in SMBUS mode. + * + * @retval None + */ +void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition)); + + /* Check the input parameter */ + if (I2C_NACKPosition == I2C_NACKPosition_Next) + { + /* Next byte in shift register is the last received byte */ + I2Cx->CR1 |= I2C_NACKPosition_Next; + } + else + { + /* Current byte in shift register is the last received byte */ + I2Cx->CR1 &= I2C_NACKPosition_Current; + } +} + +/** + * @brief Drives the SMBusAlert pin high or low for the specified I2C. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_SMBusAlert: specifies SMBAlert pin level. + * This parameter can be one of the following values: + * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low + * @arg I2C_SMBusAlert_High: SMBAlert pin driven high + * @retval None + */ +void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert)); + if (I2C_SMBusAlert == I2C_SMBusAlert_Low) + { + /* Drive the SMBusAlert pin Low */ + I2Cx->CR1 |= I2C_SMBusAlert_Low; + } + else + { + /* Drive the SMBusAlert pin High */ + I2Cx->CR1 &= I2C_SMBusAlert_High; + } +} + +/** + * @brief Enables or disables the specified I2C ARP. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2Cx ARP. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C ARP */ + I2Cx->CR1 |= I2C_CR1_ENARP; + } + else + { + /* Disable the selected I2C ARP */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_ENARP); + } +} +/** + * @} + */ + +/** @defgroup I2C_Group2 Data transfers functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + Data transfers functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Sends a data byte through the I2Cx peripheral. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param Data: Byte to be transmitted.. + * @retval None + */ +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Write in the DR register the data to be sent */ + I2Cx->DR = Data; +} + +/** + * @brief Returns the most recent received data by the I2Cx peripheral. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @retval The value of the received data. + */ +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Return the data in the DR register */ + return (uint8_t)I2Cx->DR; +} + +/** + * @} + */ + +/** @defgroup I2C_Group3 PEC management functions + * @brief PEC management functions + * +@verbatim + =============================================================================== + PEC management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified I2C PEC transfer. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2C PEC transmission. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C PEC transmission */ + I2Cx->CR1 |= I2C_CR1_PEC; + } + else + { + /* Disable the selected I2C PEC transmission */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_PEC); + } +} + +/** + * @brief Selects the specified I2C PEC position. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_PECPosition: specifies the PEC position. + * This parameter can be one of the following values: + * @arg I2C_PECPosition_Next: indicates that the next byte is PEC + * @arg I2C_PECPosition_Current: indicates that current byte is PEC + * + * @note This function configures the same bit (POS) as I2C_NACKPositionConfig() + * but is intended to be used in SMBUS mode while I2C_NACKPositionConfig() + * is intended to used in I2C mode. + * + * @retval None + */ +void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition)); + if (I2C_PECPosition == I2C_PECPosition_Next) + { + /* Next byte in shift register is PEC */ + I2Cx->CR1 |= I2C_PECPosition_Next; + } + else + { + /* Current byte in shift register is PEC */ + I2Cx->CR1 &= I2C_PECPosition_Current; + } +} + +/** + * @brief Enables or disables the PEC value calculation of the transferred bytes. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2Cx PEC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C PEC calculation */ + I2Cx->CR1 |= I2C_CR1_ENPEC; + } + else + { + /* Disable the selected I2C PEC calculation */ + I2Cx->CR1 &= (uint16_t)~((uint16_t)I2C_CR1_ENPEC); + } +} + +/** + * @brief Returns the PEC value for the specified I2C. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @retval The PEC value. + */ +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Return the selected I2C PEC value */ + return ((I2Cx->SR2) >> 8); +} + +/** + * @} + */ + +/** @defgroup I2C_Group4 DMA transfers management functions + * @brief DMA transfers management functions + * +@verbatim + =============================================================================== + DMA transfers management functions + =============================================================================== + This section provides functions allowing to configure the I2C DMA channels + requests. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified I2C DMA requests. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2C DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C DMA requests */ + I2Cx->CR2 |= I2C_CR2_DMAEN; + } + else + { + /* Disable the selected I2C DMA requests */ + I2Cx->CR2 &= (uint16_t)~((uint16_t)I2C_CR2_DMAEN); + } +} + +/** + * @brief Specifies that the next DMA transfer is the last one. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param NewState: new state of the I2C DMA last transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Next DMA transfer is the last transfer */ + I2Cx->CR2 |= I2C_CR2_LAST; + } + else + { + /* Next DMA transfer is not the last transfer */ + I2Cx->CR2 &= (uint16_t)~((uint16_t)I2C_CR2_LAST); + } +} + +/** + * @} + */ + +/** @defgroup I2C_Group5 Interrupts events and flags management functions + * @brief Interrupts, events and flags management functions + * +@verbatim + =============================================================================== + Interrupts, events and flags management functions + =============================================================================== + This section provides functions allowing to configure the I2C Interrupts + sources and check or clear the flags or pending bits status. + The user should identify which mode will be used in his application to manage + the communication: Polling mode, Interrupt mode or DMA mode. + + =============================================================================== + I2C State Monitoring Functions + =============================================================================== + This I2C driver provides three different ways for I2C state monitoring + depending on the application requirements and constraints: + + + 1. Basic state monitoring (Using I2C_CheckEvent() function) + ----------------------------------------------------------- + It compares the status registers (SR1 and SR2) content to a given event + (can be the combination of one or more flags). + It returns SUCCESS if the current status includes the given flags + and returns ERROR if one or more flags are missing in the current status. + + - When to use + - This function is suitable for most applications as well as for startup + activity since the events are fully described in the product reference + manual (RM0090). + - It is also suitable for users who need to define their own events. + + - Limitations + - If an error occurs (ie. error flags are set besides to the monitored + flags), the I2C_CheckEvent() function may return SUCCESS despite + the communication hold or corrupted real state. + In this case, it is advised to use error interrupts to monitor + the error events and handle them in the interrupt IRQ handler. + + @note + For error management, it is advised to use the following functions: + - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). + - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. + Where x is the peripheral instance (I2C1, I2C2 ...) + - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into the + I2Cx_ER_IRQHandler() function in order to determine which error occurred. + - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() + and/or I2C_GenerateStop() in order to clear the error flag and source + and return to correct communication status. + + + 2. Advanced state monitoring (Using the function I2C_GetLastEvent()) + -------------------------------------------------------------------- + Using the function I2C_GetLastEvent() which returns the image of both status + registers in a single word (uint32_t) (Status Register 2 value is shifted left + by 16 bits and concatenated to Status Register 1). + + - When to use + - This function is suitable for the same applications above but it + allows to overcome the mentioned limitation of I2C_GetFlagStatus() + function. + - The returned value could be compared to events already defined in + the library (stm32f4xx_i2c.h) or to custom values defined by user. + This function is suitable when multiple flags are monitored at the + same time. + - At the opposite of I2C_CheckEvent() function, this function allows + user to choose when an event is accepted (when all events flags are + set and no other flags are set or just when the needed flags are set + like I2C_CheckEvent() function. + + - Limitations + - User may need to define his own events. + - Same remark concerning the error management is applicable for this + function if user decides to check only regular communication flags + (and ignores error flags). + + + 3. Flag-based state monitoring (Using the function I2C_GetFlagStatus()) + ----------------------------------------------------------------------- + + Using the function I2C_GetFlagStatus() which simply returns the status of + one single flag (ie. I2C_FLAG_RXNE ...). + + - When to use + - This function could be used for specific applications or in debug + phase. + - It is suitable when only one flag checking is needed (most I2C + events are monitored through multiple flags). + - Limitations: + - When calling this function, the Status register is accessed. + Some flags are cleared when the status register is accessed. + So checking the status of one Flag, may clear other ones. + - Function may need to be called twice or more in order to monitor + one single event. + + For detailed description of Events, please refer to section I2C_Events in + stm32f4xx_i2c.h file. + +@endverbatim + * @{ + */ + +/** + * @brief Reads the specified I2C register and returns its value. + * @param I2C_Register: specifies the register to read. + * This parameter can be one of the following values: + * @arg I2C_Register_CR1: CR1 register. + * @arg I2C_Register_CR2: CR2 register. + * @arg I2C_Register_OAR1: OAR1 register. + * @arg I2C_Register_OAR2: OAR2 register. + * @arg I2C_Register_DR: DR register. + * @arg I2C_Register_SR1: SR1 register. + * @arg I2C_Register_SR2: SR2 register. + * @arg I2C_Register_CCR: CCR register. + * @arg I2C_Register_TRISE: TRISE register. + * @retval The value of the read register. + */ +uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_REGISTER(I2C_Register)); + + tmp = (uint32_t) I2Cx; + tmp += I2C_Register; + + /* Return the selected register value */ + return (*(__IO uint16_t *) tmp); +} + +/** + * @brief Enables or disables the specified I2C interrupts. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg I2C_IT_BUF: Buffer interrupt mask + * @arg I2C_IT_EVT: Event interrupt mask + * @arg I2C_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified I2C interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_I2C_CONFIG_IT(I2C_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected I2C interrupts */ + I2Cx->CR2 |= I2C_IT; + } + else + { + /* Disable the selected I2C interrupts */ + I2Cx->CR2 &= (uint16_t)~I2C_IT; + } +} + +/* + =============================================================================== + 1. Basic state monitoring + =============================================================================== + */ + +/** + * @brief Checks whether the last I2Cx Event is equal to the one passed + * as parameter. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_EVENT: specifies the event to be checked. + * This parameter can be one of the following values: + * @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED: EV1 + * @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED: EV1 + * @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED: EV1 + * @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED: EV1 + * @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED: EV1 + * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED: EV2 + * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF): EV2 + * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL): EV2 + * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED: EV3 + * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF): EV3 + * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL): EV3 + * @arg I2C_EVENT_SLAVE_ACK_FAILURE: EV3_2 + * @arg I2C_EVENT_SLAVE_STOP_DETECTED: EV4 + * @arg I2C_EVENT_MASTER_MODE_SELECT: EV5 + * @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED: EV6 + * @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED: EV6 + * @arg I2C_EVENT_MASTER_BYTE_RECEIVED: EV7 + * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING: EV8 + * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED: EV8_2 + * @arg I2C_EVENT_MASTER_MODE_ADDRESS10: EV9 + * + * @note For detailed description of Events, please refer to section I2C_Events + * in stm32f4xx_i2c.h file. + * + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Last event is equal to the I2C_EVENT + * - ERROR: Last event is different from the I2C_EVENT + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_EVENT(I2C_EVENT)); + + /* Read the I2Cx status register */ + flag1 = I2Cx->SR1; + flag2 = I2Cx->SR2; + flag2 = flag2 << 16; + + /* Get the last event value from I2C status register */ + lastevent = (flag1 | flag2) & FLAG_MASK; + + /* Check whether the last event contains the I2C_EVENT */ + if ((lastevent & I2C_EVENT) == I2C_EVENT) + { + /* SUCCESS: last event is equal to I2C_EVENT */ + status = SUCCESS; + } + else + { + /* ERROR: last event is different from I2C_EVENT */ + status = ERROR; + } + /* Return status */ + return status; +} + +/* + =============================================================================== + 2. Advanced state monitoring + =============================================================================== + */ + +/** + * @brief Returns the last I2Cx Event. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * + * @note For detailed description of Events, please refer to section I2C_Events + * in stm32f4xx_i2c.h file. + * + * @retval The last event + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Read the I2Cx status register */ + flag1 = I2Cx->SR1; + flag2 = I2Cx->SR2; + flag2 = flag2 << 16; + + /* Get the last event value from I2C status register */ + lastevent = (flag1 | flag2) & FLAG_MASK; + + /* Return status */ + return lastevent; +} + +/* + =============================================================================== + 3. Flag-based state monitoring + =============================================================================== + */ + +/** + * @brief Checks whether the specified I2C flag is set or not. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2C_FLAG_DUALF: Dual flag (Slave mode) + * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode) + * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode) + * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode) + * @arg I2C_FLAG_TRA: Transmitter/Receiver flag + * @arg I2C_FLAG_BUSY: Bus busy flag + * @arg I2C_FLAG_MSL: Master/Slave flag + * @arg I2C_FLAG_SMBALERT: SMBus Alert flag + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_FLAG_PECERR: PEC error in reception flag + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter) + * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag + * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode) + * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) + * @arg I2C_FLAG_BTF: Byte transfer finished flag + * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL" + * Address matched flag (Slave mode)"ENDAD" + * @arg I2C_FLAG_SB: Start bit flag (Master mode) + * @retval The new state of I2C_FLAG (SET or RESET). + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + FlagStatus bitstatus = RESET; + __IO uint32_t i2creg = 0, i2cxbase = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); + + /* Get the I2Cx peripheral base address */ + i2cxbase = (uint32_t)I2Cx; + + /* Read flag register index */ + i2creg = I2C_FLAG >> 28; + + /* Get bit[23:0] of the flag */ + I2C_FLAG &= FLAG_MASK; + + if(i2creg != 0) + { + /* Get the I2Cx SR1 register address */ + i2cxbase += 0x14; + } + else + { + /* Flag in I2Cx SR2 Register */ + I2C_FLAG = (uint32_t)(I2C_FLAG >> 16); + /* Get the I2Cx SR2 register address */ + i2cxbase += 0x18; + } + + if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET) + { + /* I2C_FLAG is set */ + bitstatus = SET; + } + else + { + /* I2C_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the I2C_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the I2Cx's pending flags. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg I2C_FLAG_SMBALERT: SMBus Alert flag + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_FLAG_PECERR: PEC error in reception flag + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * + * @note STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation + * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * @note ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the + * second byte of the address in DR register. + * @note BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a + * read/write to I2C_DR register (I2C_SendData()). + * @note ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to + * I2C_SR2 register ((void)(I2Cx->SR2)). + * @note SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1 + * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR + * register (I2C_SendData()). + * + * @retval None + */ +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + uint32_t flagpos = 0; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); + /* Get the I2C flag position */ + flagpos = I2C_FLAG & FLAG_MASK; + /* Clear the selected I2C flag */ + I2Cx->SR1 = (uint16_t)~flagpos; +} + +/** + * @brief Checks whether the specified I2C interrupt has occurred or not. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt source to check. + * This parameter can be one of the following values: + * @arg I2C_IT_SMBALERT: SMBus Alert flag + * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_IT_PECERR: PEC error in reception flag + * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_IT_AF: Acknowledge failure flag + * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_IT_BERR: Bus error flag + * @arg I2C_IT_TXE: Data register empty flag (Transmitter) + * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag + * @arg I2C_IT_STOPF: Stop detection flag (Slave mode) + * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode) + * @arg I2C_IT_BTF: Byte transfer finished flag + * @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL" + * Address matched flag (Slave mode)"ENDAD" + * @arg I2C_IT_SB: Start bit flag (Master mode) + * @retval The new state of I2C_IT (SET or RESET). + */ +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_IT(I2C_IT)); + + /* Check if the interrupt source is enabled or not */ + enablestatus = (uint32_t)(((I2C_IT & ITEN_MASK) >> 16) & (I2Cx->CR2)) ; + + /* Get bit[23:0] of the flag */ + I2C_IT &= FLAG_MASK; + + /* Check the status of the specified I2C flag */ + if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus) + { + /* I2C_IT is set */ + bitstatus = SET; + } + else + { + /* I2C_IT is reset */ + bitstatus = RESET; + } + /* Return the I2C_IT status */ + return bitstatus; +} + +/** + * @brief Clears the I2Cx's interrupt pending bits. + * @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg I2C_IT_SMBALERT: SMBus Alert interrupt + * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt + * @arg I2C_IT_PECERR: PEC error in reception interrupt + * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode) + * @arg I2C_IT_AF: Acknowledge failure interrupt + * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode) + * @arg I2C_IT_BERR: Bus error interrupt + * + * @note STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * @note ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second + * byte of the address in I2C_DR register. + * @note BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a + * read/write to I2C_DR register (I2C_SendData()). + * @note ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to + * I2C_SR2 register ((void)(I2Cx->SR2)). + * @note SB (Start Bit) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_DR register (I2C_SendData()). + * @retval None + */ +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + uint32_t flagpos = 0; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_IT(I2C_IT)); + + /* Get the I2C flag position */ + flagpos = I2C_IT & FLAG_MASK; + + /* Clear the selected I2C flag */ + I2Cx->SR1 = (uint16_t)~flagpos; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_i2c.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_i2c.h new file mode 100644 index 00000000000..c782c3b956f --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_i2c.h @@ -0,0 +1,692 @@ +/** + ****************************************************************************** + * @file stm32f4xx_i2c.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the I2C firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_I2C_H +#define __STM32F4xx_I2C_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief I2C Init structure definition + */ + +typedef struct +{ + uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz */ + + uint16_t I2C_Mode; /*!< Specifies the I2C mode. + This parameter can be a value of @ref I2C_mode */ + + uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ + + uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement. + This parameter can be a value of @ref I2C_acknowledgement */ + + uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged. + This parameter can be a value of @ref I2C_acknowledged_address */ +}I2C_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + + +/** @defgroup I2C_Exported_Constants + * @{ + */ + +#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \ + ((PERIPH) == I2C2) || \ + ((PERIPH) == I2C3)) +/** @defgroup I2C_mode + * @{ + */ + +#define I2C_Mode_I2C ((uint16_t)0x0000) +#define I2C_Mode_SMBusDevice ((uint16_t)0x0002) +#define I2C_Mode_SMBusHost ((uint16_t)0x000A) +#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ + ((MODE) == I2C_Mode_SMBusDevice) || \ + ((MODE) == I2C_Mode_SMBusHost)) +/** + * @} + */ + +/** @defgroup I2C_duty_cycle_in_fast_mode + * @{ + */ + +#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */ +#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */ +#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \ + ((CYCLE) == I2C_DutyCycle_2)) +/** + * @} + */ + +/** @defgroup I2C_acknowledgement + * @{ + */ + +#define I2C_Ack_Enable ((uint16_t)0x0400) +#define I2C_Ack_Disable ((uint16_t)0x0000) +#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \ + ((STATE) == I2C_Ack_Disable)) +/** + * @} + */ + +/** @defgroup I2C_transfer_direction + * @{ + */ + +#define I2C_Direction_Transmitter ((uint8_t)0x00) +#define I2C_Direction_Receiver ((uint8_t)0x01) +#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ + ((DIRECTION) == I2C_Direction_Receiver)) +/** + * @} + */ + +/** @defgroup I2C_acknowledged_address + * @{ + */ + +#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000) +#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000) +#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ + ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) +/** + * @} + */ + +/** @defgroup I2C_registers + * @{ + */ + +#define I2C_Register_CR1 ((uint8_t)0x00) +#define I2C_Register_CR2 ((uint8_t)0x04) +#define I2C_Register_OAR1 ((uint8_t)0x08) +#define I2C_Register_OAR2 ((uint8_t)0x0C) +#define I2C_Register_DR ((uint8_t)0x10) +#define I2C_Register_SR1 ((uint8_t)0x14) +#define I2C_Register_SR2 ((uint8_t)0x18) +#define I2C_Register_CCR ((uint8_t)0x1C) +#define I2C_Register_TRISE ((uint8_t)0x20) +#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ + ((REGISTER) == I2C_Register_CR2) || \ + ((REGISTER) == I2C_Register_OAR1) || \ + ((REGISTER) == I2C_Register_OAR2) || \ + ((REGISTER) == I2C_Register_DR) || \ + ((REGISTER) == I2C_Register_SR1) || \ + ((REGISTER) == I2C_Register_SR2) || \ + ((REGISTER) == I2C_Register_CCR) || \ + ((REGISTER) == I2C_Register_TRISE)) +/** + * @} + */ + +/** @defgroup I2C_NACK_position + * @{ + */ + +#define I2C_NACKPosition_Next ((uint16_t)0x0800) +#define I2C_NACKPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \ + ((POSITION) == I2C_NACKPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_SMBus_alert_pin_level + * @{ + */ + +#define I2C_SMBusAlert_Low ((uint16_t)0x2000) +#define I2C_SMBusAlert_High ((uint16_t)0xDFFF) +#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \ + ((ALERT) == I2C_SMBusAlert_High)) +/** + * @} + */ + +/** @defgroup I2C_PEC_position + * @{ + */ + +#define I2C_PECPosition_Next ((uint16_t)0x0800) +#define I2C_PECPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \ + ((POSITION) == I2C_PECPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_BUF ((uint16_t)0x0400) +#define I2C_IT_EVT ((uint16_t)0x0200) +#define I2C_IT_ERR ((uint16_t)0x0100) +#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_SMBALERT ((uint32_t)0x01008000) +#define I2C_IT_TIMEOUT ((uint32_t)0x01004000) +#define I2C_IT_PECERR ((uint32_t)0x01001000) +#define I2C_IT_OVR ((uint32_t)0x01000800) +#define I2C_IT_AF ((uint32_t)0x01000400) +#define I2C_IT_ARLO ((uint32_t)0x01000200) +#define I2C_IT_BERR ((uint32_t)0x01000100) +#define I2C_IT_TXE ((uint32_t)0x06000080) +#define I2C_IT_RXNE ((uint32_t)0x06000040) +#define I2C_IT_STOPF ((uint32_t)0x02000010) +#define I2C_IT_ADD10 ((uint32_t)0x02000008) +#define I2C_IT_BTF ((uint32_t)0x02000004) +#define I2C_IT_ADDR ((uint32_t)0x02000002) +#define I2C_IT_SB ((uint32_t)0x02000001) + +#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00)) + +#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ + ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ + ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ + ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \ + ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \ + ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ + ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) +/** + * @} + */ + +/** @defgroup I2C_flags_definition + * @{ + */ + +/** + * @brief SR2 register flags + */ + +#define I2C_FLAG_DUALF ((uint32_t)0x00800000) +#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000) +#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000) +#define I2C_FLAG_GENCALL ((uint32_t)0x00100000) +#define I2C_FLAG_TRA ((uint32_t)0x00040000) +#define I2C_FLAG_BUSY ((uint32_t)0x00020000) +#define I2C_FLAG_MSL ((uint32_t)0x00010000) + +/** + * @brief SR1 register flags + */ + +#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000) +#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000) +#define I2C_FLAG_PECERR ((uint32_t)0x10001000) +#define I2C_FLAG_OVR ((uint32_t)0x10000800) +#define I2C_FLAG_AF ((uint32_t)0x10000400) +#define I2C_FLAG_ARLO ((uint32_t)0x10000200) +#define I2C_FLAG_BERR ((uint32_t)0x10000100) +#define I2C_FLAG_TXE ((uint32_t)0x10000080) +#define I2C_FLAG_RXNE ((uint32_t)0x10000040) +#define I2C_FLAG_STOPF ((uint32_t)0x10000010) +#define I2C_FLAG_ADD10 ((uint32_t)0x10000008) +#define I2C_FLAG_BTF ((uint32_t)0x10000004) +#define I2C_FLAG_ADDR ((uint32_t)0x10000002) +#define I2C_FLAG_SB ((uint32_t)0x10000001) + +#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00)) + +#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \ + ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \ + ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \ + ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \ + ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \ + ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \ + ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \ + ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \ + ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \ + ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \ + ((FLAG) == I2C_FLAG_SB)) +/** + * @} + */ + +/** @defgroup I2C_Events + * @{ + */ + +/** + =============================================================================== + I2C Master Events (Events grouped in order of communication) + =============================================================================== + */ + +/** + * @brief Communication start + * + * After sending the START condition (I2C_GenerateSTART() function) the master + * has to wait for this event. It means that the Start condition has been correctly + * released on the I2C bus (the bus is free, no other devices is communicating). + * + */ +/* --EV5 */ +#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */ + +/** + * @brief Address Acknowledge + * + * After checking on EV5 (start condition correctly released on the bus), the + * master sends the address of the slave(s) with which it will communicate + * (I2C_Send7bitAddress() function, it also determines the direction of the communication: + * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges + * his address. If an acknowledge is sent on the bus, one of the following events will + * be set: + * + * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED + * event is set. + * + * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED + * is set + * + * 3) In case of 10-Bit addressing mode, the master (just after generating the START + * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData() + * function). Then master should wait on EV9. It means that the 10-bit addressing + * header has been correctly sent on the bus. Then master should send the second part of + * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master + * should wait for event EV6. + * + */ + +/* --EV6 */ +#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ +#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */ +/* --EV9 */ +#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */ + +/** + * @brief Communication events + * + * If a communication is established (START condition generated and slave address + * acknowledged) then the master has to check on one of the following events for + * communication procedures: + * + * 1) Master Receiver mode: The master has to wait on the event EV7 then to read + * the data received from the slave (I2C_ReceiveData() function). + * + * 2) Master Transmitter mode: The master has to send data (I2C_SendData() + * function) then to wait on event EV8 or EV8_2. + * These two events are similar: + * - EV8 means that the data has been written in the data register and is + * being shifted out. + * - EV8_2 means that the data has been physically shifted out and output + * on the bus. + * In most cases, using EV8 is sufficient for the application. + * Using EV8_2 leads to a slower communication but ensure more reliable test. + * EV8_2 is also more suitable than EV8 for testing on the last data transmission + * (before Stop condition generation). + * + * @note In case the user software does not guarantee that this event EV7 is + * managed before the current byte end of transfer, then user may check on EV7 + * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Master RECEIVER mode -----------------------------*/ +/* --EV7 */ +#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */ + +/* Master TRANSMITTER mode --------------------------*/ +/* --EV8 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */ +/* --EV8_2 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ + + +/** + =============================================================================== + I2C Slave Events (Events grouped in order of communication) + =============================================================================== + */ + + +/** + * @brief Communication start events + * + * Wait on one of these events at the start of the communication. It means that + * the I2C peripheral detected a Start condition on the bus (generated by master + * device) followed by the peripheral address. The peripheral generates an ACK + * condition on the bus (if the acknowledge feature is enabled through function + * I2C_AcknowledgeConfig()) and the events listed above are set : + * + * 1) In normal case (only one address managed by the slave), when the address + * sent by the master matches the own address of the peripheral (configured by + * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set + * (where XXX could be TRANSMITTER or RECEIVER). + * + * 2) In case the address sent by the master matches the second address of the + * peripheral (configured by the function I2C_OwnAddress2Config() and enabled + * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED + * (where XXX could be TRANSMITTER or RECEIVER) are set. + * + * 3) In case the address sent by the master is General Call (address 0x00) and + * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd()) + * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED. + * + */ + +/* --EV1 (all the events below are variants of EV1) */ +/* 1) Case of One Single Address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ + +/* 2) Case of Dual address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ + +/* 3) Case of General Call enabled for the slave */ +#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */ + +/** + * @brief Communication events + * + * Wait on one of these events when EV1 has already been checked and: + * + * - Slave RECEIVER mode: + * - EV2: When the application is expecting a data byte to be received. + * - EV4: When the application is expecting the end of the communication: master + * sends a stop condition and data transmission is stopped. + * + * - Slave Transmitter mode: + * - EV3: When a byte has been transmitted by the slave and the application is expecting + * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and + * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be + * used when the user software doesn't guarantee the EV3 is managed before the + * current byte end of transfer. + * - EV3_2: When the master sends a NACK in order to tell slave that data transmission + * shall end (before sending the STOP condition). In this case slave has to stop sending + * data bytes and expect a Stop condition on the bus. + * + * @note In case the user software does not guarantee that the event EV2 is + * managed before the current byte end of transfer, then user may check on EV2 + * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Slave RECEIVER mode --------------------------*/ +/* --EV2 */ +#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ +/* --EV4 */ +#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ + +/* Slave TRANSMITTER mode -----------------------*/ +/* --EV3 */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ +/* --EV3_2 */ +#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ + +/* + =============================================================================== + End of Events Description + =============================================================================== + */ + +#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \ + ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \ + ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE)) +/** + * @} + */ + +/** @defgroup I2C_own_address1 + * @{ + */ + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) +/** + * @} + */ + +/** @defgroup I2C_clock_speed + * @{ + */ + +#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the I2C configuration to the default reset state *****/ +void I2C_DeInit(I2C_TypeDef* I2Cx); + +/* Initialization and Configuration functions *********************************/ +void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction); +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address); +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle); +void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition); +void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert); +void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); + +/* Data transfers functions ***************************************************/ +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data); +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx); + +/* PEC management functions ***************************************************/ +void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition); +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx); + +/* DMA transfers management functions *****************************************/ +void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); + +/* Interrupts, events and flags management functions **************************/ +uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register); +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState); + +/* + =============================================================================== + I2C State Monitoring Functions + =============================================================================== + This I2C driver provides three different ways for I2C state monitoring + depending on the application requirements and constraints: + + + 1. Basic state monitoring (Using I2C_CheckEvent() function) + ----------------------------------------------------------- + It compares the status registers (SR1 and SR2) content to a given event + (can be the combination of one or more flags). + It returns SUCCESS if the current status includes the given flags + and returns ERROR if one or more flags are missing in the current status. + + - When to use + - This function is suitable for most applications as well as for startup + activity since the events are fully described in the product reference + manual (RM0090). + - It is also suitable for users who need to define their own events. + + - Limitations + - If an error occurs (ie. error flags are set besides to the monitored + flags), the I2C_CheckEvent() function may return SUCCESS despite + the communication hold or corrupted real state. + In this case, it is advised to use error interrupts to monitor + the error events and handle them in the interrupt IRQ handler. + + Note + For error management, it is advised to use the following functions: + - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). + - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. + Where x is the peripheral instance (I2C1, I2C2 ...) + - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into the + I2Cx_ER_IRQHandler() function in order to determine which error occurred. + - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() + and/or I2C_GenerateStop() in order to clear the error flag and source + and return to correct communication status. + + + 2. Advanced state monitoring (Using the function I2C_GetLastEvent()) + -------------------------------------------------------------------- + Using the function I2C_GetLastEvent() which returns the image of both status + registers in a single word (uint32_t) (Status Register 2 value is shifted left + by 16 bits and concatenated to Status Register 1). + + - When to use + - This function is suitable for the same applications above but it + allows to overcome the mentioned limitation of I2C_GetFlagStatus() + function. + - The returned value could be compared to events already defined in + this file or to custom values defined by user. + This function is suitable when multiple flags are monitored at the + same time. + - At the opposite of I2C_CheckEvent() function, this function allows + user to choose when an event is accepted (when all events flags are + set and no other flags are set or just when the needed flags are set + like I2C_CheckEvent() function. + + - Limitations + - User may need to define his own events. + - Same remark concerning the error management is applicable for this + function if user decides to check only regular communication flags + (and ignores error flags). + + + 3. Flag-based state monitoring (Using the function I2C_GetFlagStatus()) + ----------------------------------------------------------------------- + + Using the function I2C_GetFlagStatus() which simply returns the status of + one single flag (ie. I2C_FLAG_RXNE ...). + + - When to use + - This function could be used for specific applications or in debug + phase. + - It is suitable when only one flag checking is needed (most I2C + events are monitored through multiple flags). + - Limitations: + - When calling this function, the Status register is accessed. + Some flags are cleared when the status register is accessed. + So checking the status of one Flag, may clear other ones. + - Function may need to be called twice or more in order to monitor + one single event. + */ + +/* + =============================================================================== + 1. Basic state monitoring + =============================================================================== + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT); +/* + =============================================================================== + 2. Advanced state monitoring + =============================================================================== + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx); +/* + =============================================================================== + 3. Flag-based state monitoring + =============================================================================== + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); + + +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT); +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_I2C_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_iwdg.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_iwdg.c new file mode 100644 index 00000000000..510979804cc --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_iwdg.c @@ -0,0 +1,264 @@ +/** + ****************************************************************************** + * @file stm32f4xx_iwdg.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Independent watchdog (IWDG) peripheral: + * - Prescaler and Counter configuration + * - IWDG activation + * - Flag management + * + * @verbatim + * + * =================================================================== + * IWDG features + * =================================================================== + * + * The IWDG can be started by either software or hardware (configurable + * through option byte). + * + * The IWDG is clocked by its own dedicated low-speed clock (LSI) and + * thus stays active even if the main clock fails. + * Once the IWDG is started, the LSI is forced ON and cannot be disabled + * (LSI cannot be disabled too), and the counter starts counting down from + * the reset value of 0xFFF. When it reaches the end of count value (0x000) + * a system reset is generated. + * The IWDG counter should be reloaded at regular intervals to prevent + * an MCU reset. + * + * The IWDG is implemented in the VDD voltage domain that is still functional + * in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY). + * + * IWDGRST flag in RCC_CSR register can be used to inform when a IWDG + * reset occurs. + * + * Min-max timeout value @32KHz (LSI): ~125us / ~32.7s + * The IWDG timeout may vary due to LSI frequency dispersion. STM32F4xx + * devices provide the capability to measure the LSI frequency (LSI clock + * connected internally to TIM5 CH4 input capture). The measured value + * can be used to have an IWDG timeout with an acceptable accuracy. + * For more information, please refer to the STM32F4xx Reference manual + * + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. Enable write access to IWDG_PR and IWDG_RLR registers using + * IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable) function + * + * 2. Configure the IWDG prescaler using IWDG_SetPrescaler() function + * + * 3. Configure the IWDG counter value using IWDG_SetReload() function. + * This value will be loaded in the IWDG counter each time the counter + * is reloaded, then the IWDG will start counting down from this value. + * + * 4. Start the IWDG using IWDG_Enable() function, when the IWDG is used + * in software mode (no need to enable the LSI, it will be enabled + * by hardware) + * + * 5. Then the application program must reload the IWDG counter at regular + * intervals during normal operation to prevent an MCU reset, using + * IWDG_ReloadCounter() function. + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_iwdg.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup IWDG + * @brief IWDG driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* KR register bit mask */ +#define KR_KEY_RELOAD ((uint16_t)0xAAAA) +#define KR_KEY_ENABLE ((uint16_t)0xCCCC) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup IWDG_Private_Functions + * @{ + */ + +/** @defgroup IWDG_Group1 Prescaler and Counter configuration functions + * @brief Prescaler and Counter configuration functions + * +@verbatim + =============================================================================== + Prescaler and Counter configuration functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers. + * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers. + * This parameter can be one of the following values: + * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers + * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers + * @retval None + */ +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess) +{ + /* Check the parameters */ + assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess)); + IWDG->KR = IWDG_WriteAccess; +} + +/** + * @brief Sets IWDG Prescaler value. + * @param IWDG_Prescaler: specifies the IWDG Prescaler value. + * This parameter can be one of the following values: + * @arg IWDG_Prescaler_4: IWDG prescaler set to 4 + * @arg IWDG_Prescaler_8: IWDG prescaler set to 8 + * @arg IWDG_Prescaler_16: IWDG prescaler set to 16 + * @arg IWDG_Prescaler_32: IWDG prescaler set to 32 + * @arg IWDG_Prescaler_64: IWDG prescaler set to 64 + * @arg IWDG_Prescaler_128: IWDG prescaler set to 128 + * @arg IWDG_Prescaler_256: IWDG prescaler set to 256 + * @retval None + */ +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler)); + IWDG->PR = IWDG_Prescaler; +} + +/** + * @brief Sets IWDG Reload value. + * @param Reload: specifies the IWDG Reload value. + * This parameter must be a number between 0 and 0x0FFF. + * @retval None + */ +void IWDG_SetReload(uint16_t Reload) +{ + /* Check the parameters */ + assert_param(IS_IWDG_RELOAD(Reload)); + IWDG->RLR = Reload; +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_ReloadCounter(void) +{ + IWDG->KR = KR_KEY_RELOAD; +} + +/** + * @} + */ + +/** @defgroup IWDG_Group2 IWDG activation function + * @brief IWDG activation function + * +@verbatim + =============================================================================== + IWDG activation function + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_Enable(void) +{ + IWDG->KR = KR_KEY_ENABLE; +} + +/** + * @} + */ + +/** @defgroup IWDG_Group3 Flag management function + * @brief Flag management function + * +@verbatim + =============================================================================== + Flag management function + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Checks whether the specified IWDG flag is set or not. + * @param IWDG_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg IWDG_FLAG_PVU: Prescaler Value Update on going + * @arg IWDG_FLAG_RVU: Reload Value Update on going + * @retval The new state of IWDG_FLAG (SET or RESET). + */ +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_IWDG_FLAG(IWDG_FLAG)); + if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_iwdg.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_iwdg.h new file mode 100644 index 00000000000..b7b25f9ccda --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_iwdg.h @@ -0,0 +1,125 @@ +/** + ****************************************************************************** + * @file stm32f4xx_iwdg.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the IWDG + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_IWDG_H +#define __STM32F4xx_IWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup IWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup IWDG_Exported_Constants + * @{ + */ + +/** @defgroup IWDG_WriteAccess + * @{ + */ +#define IWDG_WriteAccess_Enable ((uint16_t)0x5555) +#define IWDG_WriteAccess_Disable ((uint16_t)0x0000) +#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \ + ((ACCESS) == IWDG_WriteAccess_Disable)) +/** + * @} + */ + +/** @defgroup IWDG_prescaler + * @{ + */ +#define IWDG_Prescaler_4 ((uint8_t)0x00) +#define IWDG_Prescaler_8 ((uint8_t)0x01) +#define IWDG_Prescaler_16 ((uint8_t)0x02) +#define IWDG_Prescaler_32 ((uint8_t)0x03) +#define IWDG_Prescaler_64 ((uint8_t)0x04) +#define IWDG_Prescaler_128 ((uint8_t)0x05) +#define IWDG_Prescaler_256 ((uint8_t)0x06) +#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \ + ((PRESCALER) == IWDG_Prescaler_8) || \ + ((PRESCALER) == IWDG_Prescaler_16) || \ + ((PRESCALER) == IWDG_Prescaler_32) || \ + ((PRESCALER) == IWDG_Prescaler_64) || \ + ((PRESCALER) == IWDG_Prescaler_128)|| \ + ((PRESCALER) == IWDG_Prescaler_256)) +/** + * @} + */ + +/** @defgroup IWDG_Flag + * @{ + */ +#define IWDG_FLAG_PVU ((uint16_t)0x0001) +#define IWDG_FLAG_RVU ((uint16_t)0x0002) +#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU)) +#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Prescaler and Counter configuration functions ******************************/ +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess); +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler); +void IWDG_SetReload(uint16_t Reload); +void IWDG_ReloadCounter(void); + +/* IWDG activation function ***************************************************/ +void IWDG_Enable(void); + +/* Flag management function ***************************************************/ +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_IWDG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.c new file mode 100644 index 00000000000..afd5cbc0717 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.c @@ -0,0 +1,657 @@ +/** + ****************************************************************************** + * @file stm32f4xx_pwr.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * - Backup Domain Access + * - PVD configuration + * - WakeUp pin configuration + * - Main and Backup Regulators configuration + * - FLASH Power Down configuration + * - Low Power modes configuration + * - Flags management + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_pwr.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup PWR + * @brief PWR driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* --------- PWR registers bit address in the alias region ---------- */ +#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) + +/* --- CR Register ---*/ + +/* Alias word address of DBP bit */ +#define CR_OFFSET (PWR_OFFSET + 0x00) +#define DBP_BitNumber 0x08 +#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4)) + +/* Alias word address of PVDE bit */ +#define PVDE_BitNumber 0x04 +#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4)) + +/* Alias word address of FPDS bit */ +#define FPDS_BitNumber 0x09 +#define CR_FPDS_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (FPDS_BitNumber * 4)) + +/* Alias word address of PMODE bit */ +#define PMODE_BitNumber 0x0E +#define CR_PMODE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PMODE_BitNumber * 4)) + + +/* --- CSR Register ---*/ + +/* Alias word address of EWUP bit */ +#define CSR_OFFSET (PWR_OFFSET + 0x04) +#define EWUP_BitNumber 0x08 +#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4)) + +/* Alias word address of BRE bit */ +#define BRE_BitNumber 0x09 +#define CSR_BRE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (BRE_BitNumber * 4)) + +/* ------------------ PWR registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_DS_MASK ((uint32_t)0xFFFFFFFC) +#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup PWR_Private_Functions + * @{ + */ + +/** @defgroup PWR_Group1 Backup Domain Access function + * @brief Backup Domain Access function + * +@verbatim + =============================================================================== + Backup Domain Access function + =============================================================================== + + After reset, the backup domain (RTC registers, RTC backup data + registers and backup SRAM) is protected against possible unwanted + write accesses. + To enable access to the RTC Domain and RTC registers, proceed as follows: + - Enable the Power Controller (PWR) APB1 interface clock using the + RCC_APB1PeriphClockCmd() function. + - Enable access to RTC domain using the PWR_BackupAccessCmd() function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the PWR peripheral registers to their default reset values. + * @param None + * @retval None + */ +void PWR_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); +} + +/** + * @brief Enables or disables access to the backup domain (RTC registers, RTC + * backup data registers and backup SRAM). + * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @param NewState: new state of the access to the backup domain. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_BackupAccessCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState; +} + +/** + * @} + */ + +/** @defgroup PWR_Group2 PVD configuration functions + * @brief PVD configuration functions + * +@verbatim + =============================================================================== + PVD configuration functions + =============================================================================== + + - The PVD is used to monitor the VDD power supply by comparing it to a threshold + selected by the PVD Level (PLS[2:0] bits in the PWR_CR). + - A PVDO flag is available to indicate if VDD/VDDA is higher or lower than the + PVD threshold. This event is internally connected to the EXTI line16 + and can generate an interrupt if enabled through the EXTI registers. + - The PVD is stopped in Standby mode. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param PWR_PVDLevel: specifies the PVD detection level + * This parameter can be one of the following values: + * @arg PWR_PVDLevel_0: PVD detection level set to 2.0V + * @arg PWR_PVDLevel_1: PVD detection level set to 2.2V + * @arg PWR_PVDLevel_2: PVD detection level set to 2.3V + * @arg PWR_PVDLevel_3: PVD detection level set to 2.5V + * @arg PWR_PVDLevel_4: PVD detection level set to 2.7V + * @arg PWR_PVDLevel_5: PVD detection level set to 2.8V + * @arg PWR_PVDLevel_6: PVD detection level set to 2.9V + * @arg PWR_PVDLevel_7: PVD detection level set to 3.0V + * @note Refer to the electrical characteristics of you device datasheet for more details. + * @retval None + */ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); + + tmpreg = PWR->CR; + + /* Clear PLS[7:5] bits */ + tmpreg &= CR_PLS_MASK; + + /* Set PLS[7:5] bits according to PWR_PVDLevel value */ + tmpreg |= PWR_PVDLevel; + + /* Store the new value */ + PWR->CR = tmpreg; +} + +/** + * @brief Enables or disables the Power Voltage Detector(PVD). + * @param NewState: new state of the PVD. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_PVDCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState; +} + +/** + * @} + */ + +/** @defgroup PWR_Group3 WakeUp pin configuration functions + * @brief WakeUp pin configuration functions + * +@verbatim + =============================================================================== + WakeUp pin configuration functions + =============================================================================== + + - WakeUp pin is used to wakeup the system from Standby mode. This pin is + forced in input pull down configuration and is active on rising edges. + - There is only one WakeUp pin: WakeUp Pin 1 on PA.00. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the WakeUp Pin functionality. + * @param NewState: new state of the WakeUp Pin functionality. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_WakeUpPinCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState; +} + +/** + * @} + */ + +/** @defgroup PWR_Group4 Main and Backup Regulators configuration functions + * @brief Main and Backup Regulators configuration functions + * +@verbatim + =============================================================================== + Main and Backup Regulators configuration functions + =============================================================================== + + - The backup domain includes 4 Kbytes of backup SRAM accessible only from the + CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is retained + even in Standby or VBAT mode when the low power backup regulator is enabled. + It can be considered as an internal EEPROM when VBAT is always present. + You can use the PWR_BackupRegulatorCmd() function to enable the low power + backup regulator and use the PWR_GetFlagStatus(PWR_FLAG_BRR) to check if it is + ready or not. + + - When the backup domain is supplied by VDD (analog switch connected to VDD) + the backup SRAM is powered from VDD which replaces the VBAT power supply to + save battery life. + + - The backup SRAM is not mass erased by an tamper event. It is read protected + to prevent confidential data, such as cryptographic private key, from being + accessed. The backup SRAM can be erased only through the Flash interface when + a protection level change from level 1 to level 0 is requested. + Refer to the description of Read protection (RDP) in the Flash programming manual. + + - The main internal regulator can be configured to have a tradeoff between performance + and power consumption when the device does not operate at the maximum frequency. + This is done through PWR_MainRegulatorModeConfig() function which configure VOS bit + in PWR_CR register: + - When this bit is set (Regulator voltage output Scale 1 mode selected) the System + frequency can go up to 168 MHz. + - When this bit is reset (Regulator voltage output Scale 2 mode selected) the System + frequency can go up to 144 MHz. + Refer to the datasheets for more details. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the Backup Regulator. + * @param NewState: new state of the Backup Regulator. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_BackupRegulatorCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the main internal regulator output voltage. + * @param PWR_Regulator_Voltage: specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption when the device does + * not operate at the maximum frequency (refer to the datasheets for more details). + * This parameter can be one of the following values: + * @arg PWR_Regulator_Voltage_Scale1: Regulator voltage output Scale 1 mode, + * System frequency up to 168 MHz. + * @arg PWR_Regulator_Voltage_Scale2: Regulator voltage output Scale 2 mode, + * System frequency up to 144 MHz. + * @retval None + */ +void PWR_MainRegulatorModeConfig(uint32_t PWR_Regulator_Voltage) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR_VOLTAGE(PWR_Regulator_Voltage)); + + if (PWR_Regulator_Voltage == PWR_Regulator_Voltage_Scale2) + { + PWR->CR &= ~PWR_Regulator_Voltage_Scale1; + } + else + { + PWR->CR |= PWR_Regulator_Voltage_Scale1; + } +} + +/** + * @} + */ + +/** @defgroup PWR_Group5 FLASH Power Down configuration functions + * @brief FLASH Power Down configuration functions + * +@verbatim + =============================================================================== + FLASH Power Down configuration functions + =============================================================================== + + - By setting the FPDS bit in the PWR_CR register by using the PWR_FlashPowerDownCmd() + function, the Flash memory also enters power down mode when the device enters + Stop mode. When the Flash memory is in power down mode, an additional startup + delay is incurred when waking up from Stop mode. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the Flash Power Down in STOP mode. + * @param NewState: new state of the Flash power mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_FlashPowerDownCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)NewState; +} + +/** + * @} + */ + +/** @defgroup PWR_Group6 Low Power modes configuration functions + * @brief Low Power modes configuration functions + * +@verbatim + =============================================================================== + Low Power modes configuration functions + =============================================================================== + + The devices feature 3 low-power modes: + - Sleep mode: Cortex-M4 core stopped, peripherals kept running. + - Stop mode: all clocks are stopped, regulator running, regulator in low power mode + - Standby mode: 1.2V domain powered off. + + Sleep mode + =========== + - Entry: + - The Sleep mode is entered by using the __WFI() or __WFE() functions. + - Exit: + - Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from Sleep mode. + + Stop mode + ========== + In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI, + and the HSE RC oscillators are disabled. Internal SRAM and register contents + are preserved. + The voltage regulator can be configured either in normal or low-power mode. + To minimize the consumption In Stop mode, FLASH can be powered off before + entering the Stop mode. It can be switched on again by software after exiting + the Stop mode using the PWR_FlashPowerDownCmd() function. + + - Entry: + - The Stop mode is entered using the PWR_EnterSTOPMode(PWR_Regulator_LowPower,) + function with regulator in LowPower or with Regulator ON. + - Exit: + - Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + + Standby mode + ============ + The Standby mode allows to achieve the lowest power consumption. It is based + on the Cortex-M4 deepsleep mode, with the voltage regulator disabled. + The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and + the HSE oscillator are also switched off. SRAM and register contents are lost + except for the RTC registers, RTC backup registers, backup SRAM and Standby + circuitry. + + The voltage regulator is OFF. + + - Entry: + - The Standby mode is entered using the PWR_EnterSTANDBYMode() function. + - Exit: + - WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wakeup, + tamper event, time-stamp event, external reset in NRST pin, IWDG reset. + + Auto-wakeup (AWU) from low-power mode + ===================================== + The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC + Wakeup event, a tamper event, a time-stamp event, or a comparator event, + without depending on an external interrupt (Auto-wakeup mode). + + - RTC auto-wakeup (AWU) from the Stop mode + ---------------------------------------- + + - To wake up from the Stop mode with an RTC alarm event, it is necessary to: + - Configure the EXTI Line 17 to be sensitive to rising edges (Interrupt + or Event modes) using the EXTI_Init() function. + - Enable the RTC Alarm Interrupt using the RTC_ITConfig() function + - Configure the RTC to generate the RTC alarm using the RTC_SetAlarm() + and RTC_AlarmCmd() functions. + - To wake up from the Stop mode with an RTC Tamper or time stamp event, it + is necessary to: + - Configure the EXTI Line 21 to be sensitive to rising edges (Interrupt + or Event modes) using the EXTI_Init() function. + - Enable the RTC Tamper or time stamp Interrupt using the RTC_ITConfig() + function + - Configure the RTC to detect the tamper or time stamp event using the + RTC_TimeStampConfig(), RTC_TamperTriggerConfig() and RTC_TamperCmd() + functions. + - To wake up from the Stop mode with an RTC WakeUp event, it is necessary to: + - Configure the EXTI Line 22 to be sensitive to rising edges (Interrupt + or Event modes) using the EXTI_Init() function. + - Enable the RTC WakeUp Interrupt using the RTC_ITConfig() function + - Configure the RTC to generate the RTC WakeUp event using the RTC_WakeUpClockConfig(), + RTC_SetWakeUpCounter() and RTC_WakeUpCmd() functions. + + - RTC auto-wakeup (AWU) from the Standby mode + ------------------------------------------- + - To wake up from the Standby mode with an RTC alarm event, it is necessary to: + - Enable the RTC Alarm Interrupt using the RTC_ITConfig() function + - Configure the RTC to generate the RTC alarm using the RTC_SetAlarm() + and RTC_AlarmCmd() functions. + - To wake up from the Standby mode with an RTC Tamper or time stamp event, it + is necessary to: + - Enable the RTC Tamper or time stamp Interrupt using the RTC_ITConfig() + function + - Configure the RTC to detect the tamper or time stamp event using the + RTC_TimeStampConfig(), RTC_TamperTriggerConfig() and RTC_TamperCmd() + functions. + - To wake up from the Standby mode with an RTC WakeUp event, it is necessary to: + - Enable the RTC WakeUp Interrupt using the RTC_ITConfig() function + - Configure the RTC to generate the RTC WakeUp event using the RTC_WakeUpClockConfig(), + RTC_SetWakeUpCounter() and RTC_WakeUpCmd() functions. + +@endverbatim + * @{ + */ + +/** + * @brief Enters STOP mode. + * + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note When exiting Stop mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock. + * @note When the voltage regulator operates in low power mode, an additional + * startup delay is incurred when waking up from Stop mode. + * By keeping the internal regulator ON during Stop mode, the consumption + * is higher although the startup time is reduced. + * + * @param PWR_Regulator: specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_Regulator_ON: STOP mode with regulator ON + * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode + * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction + * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction + * @retval None + */ +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(PWR_Regulator)); + assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); + + /* Select the regulator state in STOP mode ---------------------------------*/ + tmpreg = PWR->CR; + /* Clear PDDS and LPDSR bits */ + tmpreg &= CR_DS_MASK; + + /* Set LPDSR bit according to PWR_Regulator value */ + tmpreg |= PWR_Regulator; + + /* Store the new value */ + PWR->CR = tmpreg; + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + + /* Select STOP mode entry --------------------------------------------------*/ + if(PWR_STOPEntry == PWR_STOPEntry_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __WFE(); + } + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Enters STANDBY mode. + * @note In Standby mode, all I/O pins are high impedance except for: + * - Reset pad (still available) + * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC + * Alarm out, or RTC clock calibration out. + * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp. + * - WKUP pin 1 (PA0) if enabled. + * @param None + * @retval None + */ +void PWR_EnterSTANDBYMode(void) +{ + /* Clear Wakeup flag */ + PWR->CR |= PWR_CR_CWUF; + + /* Select STANDBY mode */ + PWR->CR |= PWR_CR_PDDS; + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM ) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @} + */ + +/** @defgroup PWR_Group7 Flags management functions + * @brief Flags management functions + * +@verbatim + =============================================================================== + Flags management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Checks whether the specified PWR flag is set or not. + * @param PWR_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event + * was received from the WKUP pin or from the RTC alarm (Alarm A + * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup. + * An additional wakeup event is detected if the WKUP pin is enabled + * (by setting the EWUP bit) when the WKUP pin level is already high. + * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was + * resumed from StandBy mode. + * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled + * by the PWR_PVDCmd() function. The PVD is stopped by Standby mode + * For this reason, this bit is equal to 0 after Standby or reset + * until the PVDE bit is set. + * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset + * when the device wakes up from Standby mode or by a system reset + * or power reset. + * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage + * scaling output selection is ready. + * @retval The new state of PWR_FLAG (SET or RESET). + */ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); + + if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the PWR's pending flags. + * @param PWR_FLAG: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + * @retval None + */ +void PWR_ClearFlag(uint32_t PWR_FLAG) +{ + /* Check the parameters */ + assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); + + PWR->CR |= PWR_FLAG << 2; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.h new file mode 100644 index 00000000000..6bc0404362c --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_pwr.h @@ -0,0 +1,179 @@ +/** + ****************************************************************************** + * @file stm32f4xx_pwr.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the PWR firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_PWR_H +#define __STM32F4xx_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants + * @{ + */ + +/** @defgroup PWR_PVD_detection_level + * @{ + */ + +#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0 +#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1 +#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2 +#define PWR_PVDLevel_3 PWR_CR_PLS_LEV3 +#define PWR_PVDLevel_4 PWR_CR_PLS_LEV4 +#define PWR_PVDLevel_5 PWR_CR_PLS_LEV5 +#define PWR_PVDLevel_6 PWR_CR_PLS_LEV6 +#define PWR_PVDLevel_7 PWR_CR_PLS_LEV7 + +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \ + ((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \ + ((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \ + ((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7)) +/** + * @} + */ + + +/** @defgroup PWR_Regulator_state_in_STOP_mode + * @{ + */ + +#define PWR_Regulator_ON ((uint32_t)0x00000000) +#define PWR_Regulator_LowPower PWR_CR_LPDS +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ + ((REGULATOR) == PWR_Regulator_LowPower)) +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry + * @{ + */ + +#define PWR_STOPEntry_WFI ((uint8_t)0x01) +#define PWR_STOPEntry_WFE ((uint8_t)0x02) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) + +/** @defgroup PWR_Regulator_Voltage_Scale + * @{ + */ + +#define PWR_Regulator_Voltage_Scale1 ((uint32_t)0x00004000) +#define PWR_Regulator_Voltage_Scale2 ((uint32_t)0x00000000) +#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_Regulator_Voltage_Scale1) || ((VOLTAGE) == PWR_Regulator_Voltage_Scale2)) + +/** + * @} + */ + +/** @defgroup PWR_Flag + * @{ + */ + +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_PVDO PWR_CSR_PVDO +#define PWR_FLAG_BRR PWR_CSR_BRR +#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY + +/** @defgroup PWR_Flag_Legacy + * @{ + */ +#define PWR_FLAG_REGRDY PWR_FLAG_VOSRDY +/** + * @} + */ + +#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ + ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_BRR) || \ + ((FLAG) == PWR_FLAG_VOSRDY)) + +#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the PWR configuration to the default reset state ******/ +void PWR_DeInit(void); + +/* Backup Domain Access function **********************************************/ +void PWR_BackupAccessCmd(FunctionalState NewState); + +/* PVD configuration functions ************************************************/ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); +void PWR_PVDCmd(FunctionalState NewState); + +/* WakeUp pins configuration functions ****************************************/ +void PWR_WakeUpPinCmd(FunctionalState NewState); + +/* Main and Backup Regulators configuration functions *************************/ +void PWR_BackupRegulatorCmd(FunctionalState NewState); +void PWR_MainRegulatorModeConfig(uint32_t PWR_Regulator_Voltage); + +/* FLASH Power Down configuration functions ***********************************/ +void PWR_FlashPowerDownCmd(FunctionalState NewState); + +/* Low Power modes configuration functions ************************************/ +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); +void PWR_EnterSTANDBYMode(void); + +/* Flags management functions *************************************************/ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); +void PWR_ClearFlag(uint32_t PWR_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_PWR_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.c new file mode 100644 index 00000000000..4d6e7d199cd --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.c @@ -0,0 +1,1809 @@ +/** + ****************************************************************************** + * @file stm32f4xx_rcc.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Reset and clock control (RCC) peripheral: + * - Internal/external clocks, PLL, CSS and MCO configuration + * - System, AHB and APB busses clocks configuration + * - Peripheral clocks configuration + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * RCC specific features + * =================================================================== + * + * After reset the device is running from Internal High Speed oscillator + * (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache + * and I-Cache are disabled, and all peripherals are off except internal + * SRAM, Flash and JTAG. + * - There is no prescaler on High speed (AHB) and Low speed (APB) busses; + * all peripherals mapped on these busses are running at HSI speed. + * - The clock for all peripherals is switched off, except the SRAM and FLASH. + * - All GPIOs are in input floating state, except the JTAG pins which + * are assigned to be used for debug purpose. + * + * Once the device started from reset, the user application has to: + * - Configure the clock source to be used to drive the System clock + * (if the application needs higher frequency/performance) + * - Configure the System clock frequency and Flash settings + * - Configure the AHB and APB busses prescalers + * - Enable the clock for the peripheral(s) to be used + * - Configure the clock source(s) for peripherals which clocks are not + * derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG) + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup RCC + * @brief RCC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* ------------ RCC registers bit address in the alias region ----------- */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) +/* --- CR Register ---*/ +/* Alias word address of HSION bit */ +#define CR_OFFSET (RCC_OFFSET + 0x00) +#define HSION_BitNumber 0x00 +#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) +/* Alias word address of CSSON bit */ +#define CSSON_BitNumber 0x13 +#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) +/* Alias word address of PLLON bit */ +#define PLLON_BitNumber 0x18 +#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) +/* Alias word address of PLLI2SON bit */ +#define PLLI2SON_BitNumber 0x1A +#define CR_PLLI2SON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLI2SON_BitNumber * 4)) + +/* --- CFGR Register ---*/ +/* Alias word address of I2SSRC bit */ +#define CFGR_OFFSET (RCC_OFFSET + 0x08) +#define I2SSRC_BitNumber 0x17 +#define CFGR_I2SSRC_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (I2SSRC_BitNumber * 4)) + +/* --- BDCR Register ---*/ +/* Alias word address of RTCEN bit */ +#define BDCR_OFFSET (RCC_OFFSET + 0x70) +#define RTCEN_BitNumber 0x0F +#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) +/* Alias word address of BDRST bit */ +#define BDRST_BitNumber 0x10 +#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) +/* --- CSR Register ---*/ +/* Alias word address of LSION bit */ +#define CSR_OFFSET (RCC_OFFSET + 0x74) +#define LSION_BitNumber 0x00 +#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) +/* ---------------------- RCC registers bit mask ------------------------ */ +/* CFGR register bit mask */ +#define CFGR_MCO2_RESET_MASK ((uint32_t)0x07FFFFFF) +#define CFGR_MCO1_RESET_MASK ((uint32_t)0xF89FFFFF) + +/* RCC Flag Mask */ +#define FLAG_MASK ((uint8_t)0x1F) + +/* CR register byte 3 (Bits[23:16]) base address */ +#define CR_BYTE3_ADDRESS ((uint32_t)0x40023802) + +/* CIR register byte 2 (Bits[15:8]) base address */ +#define CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01)) + +/* CIR register byte 3 (Bits[23:16]) base address */ +#define CIR_BYTE3_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02)) + +/* BDCR register base address */ +#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RCC_Private_Functions + * @{ + */ + +/** @defgroup RCC_Group1 Internal and external clocks, PLL, CSS and MCO configuration functions + * @brief Internal and external clocks, PLL, CSS and MCO configuration functions + * +@verbatim + =============================================================================== + Internal/external clocks, PLL, CSS and MCO configuration functions + =============================================================================== + + This section provide functions allowing to configure the internal/external clocks, + PLLs, CSS and MCO pins. + + 1. HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + + 2. LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + 3. HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + 4. LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + 5. PLL (clocked by HSI or HSE), featuring two different output clocks: + - The first output is used to generate the high speed system clock (up to 168 MHz) + - The second output is used to generate the clock for the USB OTG FS (48 MHz), + the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz). + + 6. PLLI2S (clocked by HSI or HSE), used to generate an accurate clock to achieve + high-quality audio performance on the I2S interface. + + 7. CSS (Clock security system), once enable and if a HSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched to HSI and an interrupt is generated if enabled. + The interrupt is linked to the Cortex-M4 NMI (Non-Maskable Interrupt) + exception vector. + + 8. MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL + clock (through a configurable prescaler) on PA8 pin. + + 9. MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S + clock (through a configurable prescaler) on PC9 pin. + +@endverbatim + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL and PLLI2S OFF + * - AHB, APB1 and APB2 prescaler set to 1. + * - CSS, MCO1 and MCO2 OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @param None + * @retval None + */ +void RCC_DeInit(void) +{ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; +} + +/** + * @brief Configures the External High Speed oscillator (HSE). + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the Clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param RCC_HSE: specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg RCC_HSE_ON: turn ON the HSE oscillator + * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock + * @retval None + */ +void RCC_HSEConfig(uint8_t RCC_HSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_HSE)); + + /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ + *(__IO uint8_t *) CR_BYTE3_ADDRESS = RCC_HSE_OFF; + + /* Set the new HSE configuration -------------------------------------------*/ + *(__IO uint8_t *) CR_BYTE3_ADDRESS = RCC_HSE; +} + +/** + * @brief Waits for HSE start-up. + * @note This functions waits on HSERDY flag to be set and return SUCCESS if + * this flag is set, otherwise returns ERROR if the timeout is reached + * and this flag is not set. The timeout value is defined by the constant + * HSE_STARTUP_TIMEOUT in stm32f4xx.h file. You can tailor it depending + * on the HSE crystal used in your application. + * @param None + * @retval An ErrorStatus enumeration value: + * - SUCCESS: HSE oscillator is stable and ready to use + * - ERROR: HSE oscillator not yet ready + */ +ErrorStatus RCC_WaitForHSEStartUp(void) +{ + __IO uint32_t startupcounter = 0; + ErrorStatus status = ERROR; + FlagStatus hsestatus = RESET; + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + hsestatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); + startupcounter++; + } while((startupcounter != HSE_STARTUP_TIMEOUT) && (hsestatus == RESET)); + + if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + return (status); +} + +/** + * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param HSICalibrationValue: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + * @retval None + */ +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); + + tmpreg = RCC->CR; + + /* Clear HSITRIM[4:0] bits */ + tmpreg &= ~RCC_CR_HSITRIM; + + /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ + tmpreg |= (uint32_t)HSICalibrationValue << 3; + + /* Store the new value */ + RCC->CR = tmpreg; +} + +/** + * @brief Enables or disables the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after startup + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * @param NewState: new state of the HSI. + * This parameter can be: ENABLE or DISABLE. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + * @retval None + */ +void RCC_HSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the External Low Speed oscillator (LSE). + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * PWR_BackupAccessCmd(ENABLE) function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_Bypass), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param RCC_LSE: specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg RCC_LSE_ON: turn ON the LSE oscillator + * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock + * @retval None + */ +void RCC_LSEConfig(uint8_t RCC_LSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_LSE)); + + /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ + /* Reset LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + + /* Reset LSEBYP bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + + /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ + switch (RCC_LSE) + { + case RCC_LSE_ON: + /* Set LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON; + break; + case RCC_LSE_Bypass: + /* Set LSEBYP and LSEON bits */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; + break; + default: + break; + } +} + +/** + * @brief Enables or disables the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @param NewState: new state of the LSI. + * This parameter can be: ENABLE or DISABLE. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + * @retval None + */ +void RCC_LSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param RCC_PLLSource: specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLSource_HSI: HSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSource_HSE: HSE oscillator clock selected as PLL clock entry + * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. + * + * @param PLLM: specifies the division factor for PLL VCO input clock + * This parameter must be a number between 0 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency + * of 2 MHz to limit PLL jitter. + * + * @param PLLN: specifies the multiplication factor for PLL VCO output clock + * This parameter must be a number between 192 and 432. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 192 and 432 MHz. + * + * @param PLLP: specifies the division factor for main system clock (SYSCLK) + * This parameter must be a number in the range {2, 4, 6, or 8}. + * @note You have to set the PLLP parameter correctly to not exceed 168 MHz on + * the System clock frequency. + * + * @param PLLQ: specifies the division factor for OTG FS, SDIO and RNG clocks + * This parameter must be a number between 4 and 15. + * @note If the USB OTG FS is used in your application, you have to set the + * PLLQ parameter correctly to have 48 MHz clock for the USB. However, + * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work + * correctly. + * + * @retval None + */ +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP, uint32_t PLLQ) +{ + /* Check the parameters */ + assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(PLLM)); + assert_param(IS_RCC_PLLN_VALUE(PLLN)); + assert_param(IS_RCC_PLLP_VALUE(PLLP)); + assert_param(IS_RCC_PLLQ_VALUE(PLLQ)); + + RCC->PLLCFGR = PLLM | (PLLN << 6) | (((PLLP >> 1) -1) << 16) | (RCC_PLLSource) | + (PLLQ << 24); +} + +/** + * @brief Enables or disables the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + * @param NewState: new state of the main PLL. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLLCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the PLLI2S clock multiplication and division factors. + * + * @note This function must be used only when the PLLI2S is disabled. + * @note PLLI2S clock source is common with the main PLL (configured in + * RCC_PLLConfig function ) + * + * @param PLLI2SN: specifies the multiplication factor for PLLI2S VCO output clock + * This parameter must be a number between 192 and 432. + * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO + * output frequency is between 192 and 432 MHz. + * + * @param PLLI2SR: specifies the division factor for I2S clock + * This parameter must be a number between 2 and 7. + * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz + * on the I2S clock frequency. + * + * @retval None + */ +void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SR) +{ + /* Check the parameters */ + assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SN)); + assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SR)); + + RCC->PLLI2SCFGR = (PLLI2SN << 6) | (PLLI2SR << 28); +} + +/** + * @brief Enables or disables the PLLI2S. + * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes. + * @param NewState: new state of the PLLI2S. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLLI2SCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PLLI2SON_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector. + * @param NewState: new state of the Clock Security System. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ClockSecuritySystemCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState; +} + +/** + * @brief Selects the clock source to output on MCO1 pin(PA8). + * @note PA8 should be configured in alternate function mode. + * @param RCC_MCO1Source: specifies the clock source to output. + * This parameter can be one of the following values: + * @arg RCC_MCO1Source_HSI: HSI clock selected as MCO1 source + * @arg RCC_MCO1Source_LSE: LSE clock selected as MCO1 source + * @arg RCC_MCO1Source_HSE: HSE clock selected as MCO1 source + * @arg RCC_MCO1Source_PLLCLK: main PLL clock selected as MCO1 source + * @param RCC_MCO1Div: specifies the MCO1 prescaler. + * This parameter can be one of the following values: + * @arg RCC_MCO1Div_1: no division applied to MCO1 clock + * @arg RCC_MCO1Div_2: division by 2 applied to MCO1 clock + * @arg RCC_MCO1Div_3: division by 3 applied to MCO1 clock + * @arg RCC_MCO1Div_4: division by 4 applied to MCO1 clock + * @arg RCC_MCO1Div_5: division by 5 applied to MCO1 clock + * @retval None + */ +void RCC_MCO1Config(uint32_t RCC_MCO1Source, uint32_t RCC_MCO1Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_MCO1SOURCE(RCC_MCO1Source)); + assert_param(IS_RCC_MCO1DIV(RCC_MCO1Div)); + + tmpreg = RCC->CFGR; + + /* Clear MCO1[1:0] and MCO1PRE[2:0] bits */ + tmpreg &= CFGR_MCO1_RESET_MASK; + + /* Select MCO1 clock source and prescaler */ + tmpreg |= RCC_MCO1Source | RCC_MCO1Div; + + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Selects the clock source to output on MCO2 pin(PC9). + * @note PC9 should be configured in alternate function mode. + * @param RCC_MCO2Source: specifies the clock source to output. + * This parameter can be one of the following values: + * @arg RCC_MCO2Source_SYSCLK: System clock (SYSCLK) selected as MCO2 source + * @arg RCC_MCO2Source_PLLI2SCLK: PLLI2S clock selected as MCO2 source + * @arg RCC_MCO2Source_HSE: HSE clock selected as MCO2 source + * @arg RCC_MCO2Source_PLLCLK: main PLL clock selected as MCO2 source + * @param RCC_MCO2Div: specifies the MCO2 prescaler. + * This parameter can be one of the following values: + * @arg RCC_MCO2Div_1: no division applied to MCO2 clock + * @arg RCC_MCO2Div_2: division by 2 applied to MCO2 clock + * @arg RCC_MCO2Div_3: division by 3 applied to MCO2 clock + * @arg RCC_MCO2Div_4: division by 4 applied to MCO2 clock + * @arg RCC_MCO2Div_5: division by 5 applied to MCO2 clock + * @retval None + */ +void RCC_MCO2Config(uint32_t RCC_MCO2Source, uint32_t RCC_MCO2Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_MCO2SOURCE(RCC_MCO2Source)); + assert_param(IS_RCC_MCO2DIV(RCC_MCO2Div)); + + tmpreg = RCC->CFGR; + + /* Clear MCO2 and MCO2PRE[2:0] bits */ + tmpreg &= CFGR_MCO2_RESET_MASK; + + /* Select MCO2 clock source and prescaler */ + tmpreg |= RCC_MCO2Source | RCC_MCO2Div; + + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @} + */ + +/** @defgroup RCC_Group2 System AHB and APB busses clocks configuration functions + * @brief System, AHB and APB busses clocks configuration functions + * +@verbatim + =============================================================================== + System, AHB and APB busses clocks configuration functions + =============================================================================== + + This section provide functions allowing to configure the System, AHB, APB1 and + APB2 busses clocks. + + 1. Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System clock through configurable prescaler + and used to clock the CPU, memory and peripherals mapped on AHB bus (DMA, GPIO...). + APB1 (PCLK1) and APB2 (PCLK2) clocks are derived from AHB clock through + configurable prescalers and used to clock the peripherals mapped on these busses. + You can use "RCC_GetClocksFreq()" function to retrieve the frequencies of these clocks. + +@note All the peripheral clocks are derived from the System clock (SYSCLK) except: + - I2S: the I2S clock can be derived either from a specific PLL (PLLI2S) or + from an external clock mapped on the I2S_CKIN pin. + You have to use RCC_I2SCLKConfig() function to configure this clock. + - RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 2 to 31. You have to use RCC_RTCCLKConfig() and RCC_RTCCLKCmd() + functions to configure this clock. + - USB OTG FS, SDIO and RTC: USB OTG FS require a frequency equal to 48 MHz + to work correctly, while the SDIO require a frequency equal or lower than + to 48. This clock is derived of the main PLL through PLLQ divider. + - IWDG clock which is always the LSI clock. + + 2. The maximum frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 82 MHz and PCLK1 42 MHz. + Depending on the device voltage range, the maximum frequency should be + adapted accordingly: + +-------------------------------------------------------------------------------------+ + | Latency | HCLK clock frequency (MHz) | + | |---------------------------------------------------------------------| + | | voltage range | voltage range | voltage range | voltage range | + | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V | + |---------------|----------------|----------------|-----------------|-----------------| + |0WS(1CPU cycle)|0 < HCLK <= 30 |0 < HCLK <= 24 |0 < HCLK <= 18 |0 < HCLK <= 16 | + |---------------|----------------|----------------|-----------------|-----------------| + |1WS(2CPU cycle)|30 < HCLK <= 60 |24 < HCLK <= 48 |18 < HCLK <= 36 |16 < HCLK <= 32 | + |---------------|----------------|----------------|-----------------|-----------------| + |2WS(3CPU cycle)|60 < HCLK <= 90 |48 < HCLK <= 72 |36 < HCLK <= 54 |32 < HCLK <= 48 | + |---------------|----------------|----------------|-----------------|-----------------| + |3WS(4CPU cycle)|90 < HCLK <= 120|72 < HCLK <= 96 |54 < HCLK <= 72 |48 < HCLK <= 64 | + |---------------|----------------|----------------|-----------------|-----------------| + |4WS(5CPU cycle)|120< HCLK <= 150|96 < HCLK <= 120|72 < HCLK <= 90 |64 < HCLK <= 80 | + |---------------|----------------|----------------|-----------------|-----------------| + |5WS(6CPU cycle)|120< HCLK <= 168|120< HCLK <= 144|90 < HCLK <= 108 |80 < HCLK <= 96 | + |---------------|----------------|----------------|-----------------|-----------------| + |6WS(7CPU cycle)| NA |144< HCLK <= 168|108 < HCLK <= 120|96 < HCLK <= 112 | + |---------------|----------------|----------------|-----------------|-----------------| + |7WS(8CPU cycle)| NA | NA |120 < HCLK <= 138|112 < HCLK <= 120| + +-------------------------------------------------------------------------------------+ + @note When VOS bit (in PWR_CR register) is reset to '0’, the maximum value of HCLK is 144 MHz. + You can use PWR_MainRegulatorModeConfig() function to set or reset this bit. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the system clock (SYSCLK). + * @note The HSI is used (enabled by hardware) as system clock source after + * startup from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use RCC_GetSYSCLKSource() function to know which clock is + * currently used as system clock source. + * @param RCC_SYSCLKSource: specifies the clock source used as system clock. + * This parameter can be one of the following values: + * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock source + * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock source + * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock source + * @retval None + */ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); + + tmpreg = RCC->CFGR; + + /* Clear SW[1:0] bits */ + tmpreg &= ~RCC_CFGR_SW; + + /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ + tmpreg |= RCC_SYSCLKSource; + + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Returns the clock source used as system clock. + * @param None + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * - 0x00: HSI used as system clock + * - 0x04: HSE used as system clock + * - 0x08: PLL used as system clock + */ +uint8_t RCC_GetSYSCLKSource(void) +{ + return ((uint8_t)(RCC->CFGR & RCC_CFGR_SWS)); +} + +/** + * @brief Configures the AHB clock (HCLK). + * @note Depending on the device voltage range, the software has to set correctly + * these bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above + * "CPU, AHB and APB busses clocks configuration functions") + * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from + * the system clock (SYSCLK). + * This parameter can be one of the following values: + * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK + * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 + * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 + * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 + * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 + * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 + * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 + * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 + * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 + * @retval None + */ +void RCC_HCLKConfig(uint32_t RCC_SYSCLK) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_HCLK(RCC_SYSCLK)); + + tmpreg = RCC->CFGR; + + /* Clear HPRE[3:0] bits */ + tmpreg &= ~RCC_CFGR_HPRE; + + /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ + tmpreg |= RCC_SYSCLK; + + /* Store the new value */ + RCC->CFGR = tmpreg; +} + + +/** + * @brief Configures the Low Speed APB clock (PCLK1). + * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB1 clock = HCLK + * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK1Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + + tmpreg = RCC->CFGR; + + /* Clear PPRE1[2:0] bits */ + tmpreg &= ~RCC_CFGR_PPRE1; + + /* Set PPRE1[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK; + + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the High Speed APB clock (PCLK2). + * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB2 clock = HCLK + * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK2Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + + tmpreg = RCC->CFGR; + + /* Clear PPRE2[2:0] bits */ + tmpreg &= ~RCC_CFGR_PPRE2; + + /* Set PPRE2[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK << 3; + + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Returns the frequencies of different on chip clocks; SYSCLK, HCLK, + * PCLK1 and PCLK2. + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * @note (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold + * the clocks frequencies. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * @note Each time SYSCLK, HCLK, PCLK1 and/or PCLK2 clock changes, this function + * must be called to update the structure's field. Otherwise, any + * configuration based on this function will be incorrect. + * + * @retval None + */ +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) +{ + uint32_t tmp = 0, presc = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + SYSCLK = PLL_VCO / PLLP + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + RCC_Clocks->SYSCLK_Frequency = pllvco/pllp; + break; + default: + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + } + /* Compute HCLK, PCLK1 and PCLK2 clocks frequencies ------------------------*/ + + /* Get HCLK prescaler */ + tmp = RCC->CFGR & RCC_CFGR_HPRE; + tmp = tmp >> 4; + presc = APBAHBPrescTable[tmp]; + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; + + /* Get PCLK1 prescaler */ + tmp = RCC->CFGR & RCC_CFGR_PPRE1; + tmp = tmp >> 10; + presc = APBAHBPrescTable[tmp]; + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + + /* Get PCLK2 prescaler */ + tmp = RCC->CFGR & RCC_CFGR_PPRE2; + tmp = tmp >> 13; + presc = APBAHBPrescTable[tmp]; + /* PCLK2 clock frequency */ + RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; +} + +/** + * @} + */ + +/** @defgroup RCC_Group3 Peripheral clocks configuration functions + * @brief Peripheral clocks configuration functions + * +@verbatim + =============================================================================== + Peripheral clocks configuration functions + =============================================================================== + + This section provide functions allowing to configure the Peripheral clocks. + + 1. The RTC clock which is derived from the LSI, LSE or HSE clock divided by 2 to 31. + + 2. After restart from Reset or wakeup from STANDBY, all peripherals are off + except internal SRAM, Flash and JTAG. Before to start using a peripheral you + have to enable its interface clock. You can do this using RCC_AHBPeriphClockCmd() + , RCC_APB2PeriphClockCmd() and RCC_APB1PeriphClockCmd() functions. + + 3. To reset the peripherals configuration (to the default state after device reset) + you can use RCC_AHBPeriphResetCmd(), RCC_APB2PeriphResetCmd() and + RCC_APB1PeriphResetCmd() functions. + + 4. To further reduce power consumption in SLEEP mode the peripheral clocks can + be disabled prior to executing the WFI or WFE instructions. You can do this + using RCC_AHBPeriphClockLPModeCmd(), RCC_APB2PeriphClockLPModeCmd() and + RCC_APB1PeriphClockLPModeCmd() functions. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using PWR_BackupAccessCmd(ENABLE) function before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it can't be changed unless the + * Backup domain is reset using RCC_BackupResetCmd() function, or by + * a Power On Reset (POR). + * + * @param RCC_RTCCLKSource: specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock + * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock + * @arg RCC_RTCCLKSource_HSE_Divx: HSE clock divided by x selected + * as RTC clock, where x:[2,31] + * + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + * + * @retval None + */ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); + + if ((RCC_RTCCLKSource & 0x00000300) == 0x00000300) + { /* If HSE is selected as RTC clock source, configure HSE division factor for RTC clock */ + tmpreg = RCC->CFGR; + + /* Clear RTCPRE[4:0] bits */ + tmpreg &= ~RCC_CFGR_RTCPRE; + + /* Configure HSE division factor for RTC clock */ + tmpreg |= (RCC_RTCCLKSource & 0xFFFFCFF); + + /* Store the new value */ + RCC->CFGR = tmpreg; + } + + /* Select the RTC clock source */ + RCC->BDCR |= (RCC_RTCCLKSource & 0x00000FFF); +} + +/** + * @brief Enables or disables the RTC clock. + * @note This function must be used only after the RTC clock source was selected + * using the RCC_RTCCLKConfig function. + * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_RTCCLKCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState; +} + +/** + * @brief Forces or releases the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_CSR register. + * @note The BKPSRAM is not affected by this reset. + * @param NewState: new state of the Backup domain reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_BackupResetCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the I2S clock source (I2SCLK). + * @note This function must be called before enabling the I2S APB clock. + * @param RCC_I2SCLKSource: specifies the I2S clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S2CLKSource_PLLI2S: PLLI2S clock used as I2S clock source + * @arg RCC_I2S2CLKSource_Ext: External clock mapped on the I2S_CKIN pin + * used as I2S clock source + * @retval None + */ +void RCC_I2SCLKConfig(uint32_t RCC_I2SCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2SCLK_SOURCE(RCC_I2SCLKSource)); + + *(__IO uint32_t *) CFGR_I2SSRC_BB = RCC_I2SCLKSource; +} + +/** + * @brief Enables or disables the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @param RCC_AHBPeriph: specifies the AHB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_AHB1Periph_GPIOA: GPIOA clock + * @arg RCC_AHB1Periph_GPIOB: GPIOB clock + * @arg RCC_AHB1Periph_GPIOC: GPIOC clock + * @arg RCC_AHB1Periph_GPIOD: GPIOD clock + * @arg RCC_AHB1Periph_GPIOE: GPIOE clock + * @arg RCC_AHB1Periph_GPIOF: GPIOF clock + * @arg RCC_AHB1Periph_GPIOG: GPIOG clock + * @arg RCC_AHB1Periph_GPIOG: GPIOG clock + * @arg RCC_AHB1Periph_GPIOI: GPIOI clock + * @arg RCC_AHB1Periph_CRC: CRC clock + * @arg RCC_AHB1Periph_BKPSRAM: BKPSRAM interface clock + * @arg RCC_AHB1Periph_CCMDATARAMEN CCM data RAM interface clock + * @arg RCC_AHB1Periph_DMA1: DMA1 clock + * @arg RCC_AHB1Periph_DMA2: DMA2 clock + * @arg RCC_AHB1Periph_ETH_MAC: Ethernet MAC clock + * @arg RCC_AHB1Periph_ETH_MAC_Tx: Ethernet Transmission clock + * @arg RCC_AHB1Periph_ETH_MAC_Rx: Ethernet Reception clock + * @arg RCC_AHB1Periph_ETH_MAC_PTP: Ethernet PTP clock + * @arg RCC_AHB1Periph_OTG_HS: USB OTG HS clock + * @arg RCC_AHB1Periph_OTG_HS_ULPI: USB OTG HS ULPI clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHB1PeriphClockCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB1_CLOCK_PERIPH(RCC_AHB1Periph)); + + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->AHB1ENR |= RCC_AHB1Periph; + } + else + { + RCC->AHB1ENR &= ~RCC_AHB1Periph; + } +} + +/** + * @brief Enables or disables the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @param RCC_AHBPeriph: specifies the AHB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_AHB2Periph_DCMI: DCMI clock + * @arg RCC_AHB2Periph_CRYP: CRYP clock + * @arg RCC_AHB2Periph_HASH: HASH clock + * @arg RCC_AHB2Periph_RNG: RNG clock + * @arg RCC_AHB2Periph_OTG_FS: USB OTG FS clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHB2PeriphClockCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB2_PERIPH(RCC_AHB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHB2ENR |= RCC_AHB2Periph; + } + else + { + RCC->AHB2ENR &= ~RCC_AHB2Periph; + } +} + +/** + * @brief Enables or disables the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @param RCC_AHBPeriph: specifies the AHB3 peripheral to gates its clock. + * This parameter must be: RCC_AHB3Periph_FSMC + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHB3PeriphClockCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB3_PERIPH(RCC_AHB3Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHB3ENR |= RCC_AHB3Periph; + } + else + { + RCC->AHB3ENR &= ~RCC_AHB3Periph; + } +} + +/** + * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2: TIM2 clock + * @arg RCC_APB1Periph_TIM3: TIM3 clock + * @arg RCC_APB1Periph_TIM4: TIM4 clock + * @arg RCC_APB1Periph_TIM5: TIM5 clock + * @arg RCC_APB1Periph_TIM6: TIM6 clock + * @arg RCC_APB1Periph_TIM7: TIM7 clock + * @arg RCC_APB1Periph_TIM12: TIM12 clock + * @arg RCC_APB1Periph_TIM13: TIM13 clock + * @arg RCC_APB1Periph_TIM14: TIM14 clock + * @arg RCC_APB1Periph_WWDG: WWDG clock + * @arg RCC_APB1Periph_SPI2: SPI2 clock + * @arg RCC_APB1Periph_SPI3: SPI3 clock + * @arg RCC_APB1Periph_USART2: USART2 clock + * @arg RCC_APB1Periph_USART3: USART3 clock + * @arg RCC_APB1Periph_UART4: UART4 clock + * @arg RCC_APB1Periph_UART5: UART5 clock + * @arg RCC_APB1Periph_I2C1: I2C1 clock + * @arg RCC_APB1Periph_I2C2: I2C2 clock + * @arg RCC_APB1Periph_I2C3: I2C3 clock + * @arg RCC_APB1Periph_CAN1: CAN1 clock + * @arg RCC_APB1Periph_CAN2: CAN2 clock + * @arg RCC_APB1Periph_PWR: PWR clock + * @arg RCC_APB1Periph_DAC: DAC clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->APB1ENR |= RCC_APB1Periph; + } + else + { + RCC->APB1ENR &= ~RCC_APB1Periph; + } +} + +/** + * @brief Enables or disables the High Speed APB (APB2) peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_TIM1: TIM1 clock + * @arg RCC_APB2Periph_TIM8: TIM8 clock + * @arg RCC_APB2Periph_USART1: USART1 clock + * @arg RCC_APB2Periph_USART6: USART6 clock + * @arg RCC_APB2Periph_ADC1: ADC1 clock + * @arg RCC_APB2Periph_ADC2: ADC2 clock + * @arg RCC_APB2Periph_ADC3: ADC3 clock + * @arg RCC_APB2Periph_SDIO: SDIO clock + * @arg RCC_APB2Periph_SPI1: SPI1 clock + * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock + * @arg RCC_APB2Periph_TIM9: TIM9 clock + * @arg RCC_APB2Periph_TIM10: TIM10 clock + * @arg RCC_APB2Periph_TIM11: TIM11 clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->APB2ENR |= RCC_APB2Periph; + } + else + { + RCC->APB2ENR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Forces or releases AHB1 peripheral reset. + * @param RCC_AHB1Periph: specifies the AHB1 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_AHB1Periph_GPIOA: GPIOA clock + * @arg RCC_AHB1Periph_GPIOB: GPIOB clock + * @arg RCC_AHB1Periph_GPIOC: GPIOC clock + * @arg RCC_AHB1Periph_GPIOD: GPIOD clock + * @arg RCC_AHB1Periph_GPIOE: GPIOE clock + * @arg RCC_AHB1Periph_GPIOF: GPIOF clock + * @arg RCC_AHB1Periph_GPIOG: GPIOG clock + * @arg RCC_AHB1Periph_GPIOG: GPIOG clock + * @arg RCC_AHB1Periph_GPIOI: GPIOI clock + * @arg RCC_AHB1Periph_CRC: CRC clock + * @arg RCC_AHB1Periph_DMA1: DMA1 clock + * @arg RCC_AHB1Periph_DMA2: DMA2 clock + * @arg RCC_AHB1Periph_ETH_MAC: Ethernet MAC clock + * @arg RCC_AHB1Periph_OTG_HS: USB OTG HS clock + * + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHB1PeriphResetCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB1_RESET_PERIPH(RCC_AHB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHB1RSTR |= RCC_AHB1Periph; + } + else + { + RCC->AHB1RSTR &= ~RCC_AHB1Periph; + } +} + +/** + * @brief Forces or releases AHB2 peripheral reset. + * @param RCC_AHB2Periph: specifies the AHB2 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_AHB2Periph_DCMI: DCMI clock + * @arg RCC_AHB2Periph_CRYP: CRYP clock + * @arg RCC_AHB2Periph_HASH: HASH clock + * @arg RCC_AHB2Periph_RNG: RNG clock + * @arg RCC_AHB2Periph_OTG_FS: USB OTG FS clock + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHB2PeriphResetCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB2_PERIPH(RCC_AHB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHB2RSTR |= RCC_AHB2Periph; + } + else + { + RCC->AHB2RSTR &= ~RCC_AHB2Periph; + } +} + +/** + * @brief Forces or releases AHB3 peripheral reset. + * @param RCC_AHB3Periph: specifies the AHB3 peripheral to reset. + * This parameter must be: RCC_AHB3Periph_FSMC + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHB3PeriphResetCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB3_PERIPH(RCC_AHB3Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHB3RSTR |= RCC_AHB3Periph; + } + else + { + RCC->AHB3RSTR &= ~RCC_AHB3Periph; + } +} + +/** + * @brief Forces or releases Low Speed APB (APB1) peripheral reset. + * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2: TIM2 clock + * @arg RCC_APB1Periph_TIM3: TIM3 clock + * @arg RCC_APB1Periph_TIM4: TIM4 clock + * @arg RCC_APB1Periph_TIM5: TIM5 clock + * @arg RCC_APB1Periph_TIM6: TIM6 clock + * @arg RCC_APB1Periph_TIM7: TIM7 clock + * @arg RCC_APB1Periph_TIM12: TIM12 clock + * @arg RCC_APB1Periph_TIM13: TIM13 clock + * @arg RCC_APB1Periph_TIM14: TIM14 clock + * @arg RCC_APB1Periph_WWDG: WWDG clock + * @arg RCC_APB1Periph_SPI2: SPI2 clock + * @arg RCC_APB1Periph_SPI3: SPI3 clock + * @arg RCC_APB1Periph_USART2: USART2 clock + * @arg RCC_APB1Periph_USART3: USART3 clock + * @arg RCC_APB1Periph_UART4: UART4 clock + * @arg RCC_APB1Periph_UART5: UART5 clock + * @arg RCC_APB1Periph_I2C1: I2C1 clock + * @arg RCC_APB1Periph_I2C2: I2C2 clock + * @arg RCC_APB1Periph_I2C3: I2C3 clock + * @arg RCC_APB1Periph_CAN1: CAN1 clock + * @arg RCC_APB1Periph_CAN2: CAN2 clock + * @arg RCC_APB1Periph_PWR: PWR clock + * @arg RCC_APB1Periph_DAC: DAC clock + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1RSTR |= RCC_APB1Periph; + } + else + { + RCC->APB1RSTR &= ~RCC_APB1Periph; + } +} + +/** + * @brief Forces or releases High Speed APB (APB2) peripheral reset. + * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_TIM1: TIM1 clock + * @arg RCC_APB2Periph_TIM8: TIM8 clock + * @arg RCC_APB2Periph_USART1: USART1 clock + * @arg RCC_APB2Periph_USART6: USART6 clock + * @arg RCC_APB2Periph_ADC1: ADC1 clock + * @arg RCC_APB2Periph_ADC2: ADC2 clock + * @arg RCC_APB2Periph_ADC3: ADC3 clock + * @arg RCC_APB2Periph_SDIO: SDIO clock + * @arg RCC_APB2Periph_SPI1: SPI1 clock + * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock + * @arg RCC_APB2Periph_TIM9: TIM9 clock + * @arg RCC_APB2Periph_TIM10: TIM10 clock + * @arg RCC_APB2Periph_TIM11: TIM11 clock + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_RESET_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2RSTR |= RCC_APB2Periph; + } + else + { + RCC->APB2RSTR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Enables or disables the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @param RCC_AHBPeriph: specifies the AHB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_AHB1Periph_GPIOA: GPIOA clock + * @arg RCC_AHB1Periph_GPIOB: GPIOB clock + * @arg RCC_AHB1Periph_GPIOC: GPIOC clock + * @arg RCC_AHB1Periph_GPIOD: GPIOD clock + * @arg RCC_AHB1Periph_GPIOE: GPIOE clock + * @arg RCC_AHB1Periph_GPIOF: GPIOF clock + * @arg RCC_AHB1Periph_GPIOG: GPIOG clock + * @arg RCC_AHB1Periph_GPIOG: GPIOG clock + * @arg RCC_AHB1Periph_GPIOI: GPIOI clock + * @arg RCC_AHB1Periph_CRC: CRC clock + * @arg RCC_AHB1Periph_BKPSRAM: BKPSRAM interface clock + * @arg RCC_AHB1Periph_DMA1: DMA1 clock + * @arg RCC_AHB1Periph_DMA2: DMA2 clock + * @arg RCC_AHB1Periph_ETH_MAC: Ethernet MAC clock + * @arg RCC_AHB1Periph_ETH_MAC_Tx: Ethernet Transmission clock + * @arg RCC_AHB1Periph_ETH_MAC_Rx: Ethernet Reception clock + * @arg RCC_AHB1Periph_ETH_MAC_PTP: Ethernet PTP clock + * @arg RCC_AHB1Periph_OTG_HS: USB OTG HS clock + * @arg RCC_AHB1Periph_OTG_HS_ULPI: USB OTG HS ULPI clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHB1PeriphClockLPModeCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB1_LPMODE_PERIPH(RCC_AHB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->AHB1LPENR |= RCC_AHB1Periph; + } + else + { + RCC->AHB1LPENR &= ~RCC_AHB1Periph; + } +} + +/** + * @brief Enables or disables the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @param RCC_AHBPeriph: specifies the AHB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_AHB2Periph_DCMI: DCMI clock + * @arg RCC_AHB2Periph_CRYP: CRYP clock + * @arg RCC_AHB2Periph_HASH: HASH clock + * @arg RCC_AHB2Periph_RNG: RNG clock + * @arg RCC_AHB2Periph_OTG_FS: USB OTG FS clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHB2PeriphClockLPModeCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB2_PERIPH(RCC_AHB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->AHB2LPENR |= RCC_AHB2Periph; + } + else + { + RCC->AHB2LPENR &= ~RCC_AHB2Periph; + } +} + +/** + * @brief Enables or disables the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @param RCC_AHBPeriph: specifies the AHB3 peripheral to gates its clock. + * This parameter must be: RCC_AHB3Periph_FSMC + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHB3PeriphClockLPModeCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB3_PERIPH(RCC_AHB3Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->AHB3LPENR |= RCC_AHB3Periph; + } + else + { + RCC->AHB3LPENR &= ~RCC_AHB3Periph; + } +} + +/** + * @brief Enables or disables the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2: TIM2 clock + * @arg RCC_APB1Periph_TIM3: TIM3 clock + * @arg RCC_APB1Periph_TIM4: TIM4 clock + * @arg RCC_APB1Periph_TIM5: TIM5 clock + * @arg RCC_APB1Periph_TIM6: TIM6 clock + * @arg RCC_APB1Periph_TIM7: TIM7 clock + * @arg RCC_APB1Periph_TIM12: TIM12 clock + * @arg RCC_APB1Periph_TIM13: TIM13 clock + * @arg RCC_APB1Periph_TIM14: TIM14 clock + * @arg RCC_APB1Periph_WWDG: WWDG clock + * @arg RCC_APB1Periph_SPI2: SPI2 clock + * @arg RCC_APB1Periph_SPI3: SPI3 clock + * @arg RCC_APB1Periph_USART2: USART2 clock + * @arg RCC_APB1Periph_USART3: USART3 clock + * @arg RCC_APB1Periph_UART4: UART4 clock + * @arg RCC_APB1Periph_UART5: UART5 clock + * @arg RCC_APB1Periph_I2C1: I2C1 clock + * @arg RCC_APB1Periph_I2C2: I2C2 clock + * @arg RCC_APB1Periph_I2C3: I2C3 clock + * @arg RCC_APB1Periph_CAN1: CAN1 clock + * @arg RCC_APB1Periph_CAN2: CAN2 clock + * @arg RCC_APB1Periph_PWR: PWR clock + * @arg RCC_APB1Periph_DAC: DAC clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphClockLPModeCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1LPENR |= RCC_APB1Periph; + } + else + { + RCC->APB1LPENR &= ~RCC_APB1Periph; + } +} + +/** + * @brief Enables or disables the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_TIM1: TIM1 clock + * @arg RCC_APB2Periph_TIM8: TIM8 clock + * @arg RCC_APB2Periph_USART1: USART1 clock + * @arg RCC_APB2Periph_USART6: USART6 clock + * @arg RCC_APB2Periph_ADC1: ADC1 clock + * @arg RCC_APB2Periph_ADC2: ADC2 clock + * @arg RCC_APB2Periph_ADC3: ADC3 clock + * @arg RCC_APB2Periph_SDIO: SDIO clock + * @arg RCC_APB2Periph_SPI1: SPI1 clock + * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock + * @arg RCC_APB2Periph_TIM9: TIM9 clock + * @arg RCC_APB2Periph_TIM10: TIM10 clock + * @arg RCC_APB2Periph_TIM11: TIM11 clock + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphClockLPModeCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2LPENR |= RCC_APB2Periph; + } + else + { + RCC->APB2LPENR &= ~RCC_APB2Periph; + } +} + +/** + * @} + */ + +/** @defgroup RCC_Group4 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified RCC interrupts. + * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt + * @param NewState: new state of the specified RCC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_IT(RCC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Perform Byte access to RCC_CIR[14:8] bits to enable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT; + } + else + { + /* Perform Byte access to RCC_CIR[14:8] bits to disable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; + } +} + +/** + * @brief Checks whether the specified RCC flag is set or not. + * @param RCC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: main PLL clock ready + * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * @retval The new state of RCC_FLAG (SET or RESET). + */ +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) +{ + uint32_t tmp = 0; + uint32_t statusreg = 0; + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_FLAG(RCC_FLAG)); + + /* Get the RCC register index */ + tmp = RCC_FLAG >> 5; + if (tmp == 1) /* The flag to check is in CR register */ + { + statusreg = RCC->CR; + } + else if (tmp == 2) /* The flag to check is in BDCR register */ + { + statusreg = RCC->BDCR; + } + else /* The flag to check is in CSR register */ + { + statusreg = RCC->CSR; + } + + /* Get the flag position */ + tmp = RCC_FLAG & FLAG_MASK; + if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the RCC reset flags. + * The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + * @param None + * @retval None + */ +void RCC_ClearFlag(void) +{ + /* Set RMVF bit to clear the reset flags */ + RCC->CSR |= RCC_CSR_RMVF; +} + +/** + * @brief Checks whether the specified RCC interrupt has occurred or not. + * @param RCC_IT: specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval The new state of RCC_IT (SET or RESET). + */ +ITStatus RCC_GetITStatus(uint8_t RCC_IT) +{ + ITStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_GET_IT(RCC_IT)); + + /* Check the status of the specified RCC interrupt */ + if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the RCC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the RCC's interrupt pending bits. + * @param RCC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval None + */ +void RCC_ClearITPendingBit(uint8_t RCC_IT) +{ + /* Check the parameters */ + assert_param(IS_RCC_CLEAR_IT(RCC_IT)); + + /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt + pending bits */ + *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.h new file mode 100644 index 00000000000..378185646ea --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rcc.h @@ -0,0 +1,510 @@ +/** + ****************************************************************************** + * @file stm32f4xx_rcc.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the RCC firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_RCC_H +#define __STM32F4xx_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency expressed in Hz */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency expressed in Hz */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency expressed in Hz */ + uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency expressed in Hz */ +}RCC_ClocksTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Constants + * @{ + */ + +/** @defgroup RCC_HSE_configuration + * @{ + */ +#define RCC_HSE_OFF ((uint8_t)0x00) +#define RCC_HSE_ON ((uint8_t)0x01) +#define RCC_HSE_Bypass ((uint8_t)0x05) +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_Bypass)) +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Source + * @{ + */ +#define RCC_PLLSource_HSI ((uint32_t)0x00000000) +#define RCC_PLLSource_HSE ((uint32_t)0x00400000) +#define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI) || \ + ((SOURCE) == RCC_PLLSource_HSE)) +#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63) +#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432)) +#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8)) +#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15)) + +#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432)) +#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source + * @{ + */ +#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) +#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) +#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) +#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ + ((SOURCE) == RCC_SYSCLKSource_HSE) || \ + ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source + * @{ + */ +#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) +#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) +#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) +#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) +#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) +#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) +#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) +#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) +#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ + ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ + ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ + ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ + ((HCLK) == RCC_SYSCLK_Div512)) +/** + * @} + */ + +/** @defgroup RCC_APB1_APB2_Clock_Source + * @{ + */ +#define RCC_HCLK_Div1 ((uint32_t)0x00000000) +#define RCC_HCLK_Div2 ((uint32_t)0x00001000) +#define RCC_HCLK_Div4 ((uint32_t)0x00001400) +#define RCC_HCLK_Div8 ((uint32_t)0x00001800) +#define RCC_HCLK_Div16 ((uint32_t)0x00001C00) +#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ + ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ + ((PCLK) == RCC_HCLK_Div16)) +/** + * @} + */ + +/** @defgroup RCC_Interrupt_Source + * @{ + */ +#define RCC_IT_LSIRDY ((uint8_t)0x01) +#define RCC_IT_LSERDY ((uint8_t)0x02) +#define RCC_IT_HSIRDY ((uint8_t)0x04) +#define RCC_IT_HSERDY ((uint8_t)0x08) +#define RCC_IT_PLLRDY ((uint8_t)0x10) +#define RCC_IT_PLLI2SRDY ((uint8_t)0x20) +#define RCC_IT_CSS ((uint8_t)0x80) +#define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xC0) == 0x00) && ((IT) != 0x00)) +#define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \ + ((IT) == RCC_IT_PLLI2SRDY)) +#define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x40) == 0x00) && ((IT) != 0x00)) +/** + * @} + */ + +/** @defgroup RCC_LSE_Configuration + * @{ + */ +#define RCC_LSE_OFF ((uint8_t)0x00) +#define RCC_LSE_ON ((uint8_t)0x01) +#define RCC_LSE_Bypass ((uint8_t)0x04) +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_Bypass)) +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source + * @{ + */ +#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) +#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) +#define RCC_RTCCLKSource_HSE_Div2 ((uint32_t)0x00020300) +#define RCC_RTCCLKSource_HSE_Div3 ((uint32_t)0x00030300) +#define RCC_RTCCLKSource_HSE_Div4 ((uint32_t)0x00040300) +#define RCC_RTCCLKSource_HSE_Div5 ((uint32_t)0x00050300) +#define RCC_RTCCLKSource_HSE_Div6 ((uint32_t)0x00060300) +#define RCC_RTCCLKSource_HSE_Div7 ((uint32_t)0x00070300) +#define RCC_RTCCLKSource_HSE_Div8 ((uint32_t)0x00080300) +#define RCC_RTCCLKSource_HSE_Div9 ((uint32_t)0x00090300) +#define RCC_RTCCLKSource_HSE_Div10 ((uint32_t)0x000A0300) +#define RCC_RTCCLKSource_HSE_Div11 ((uint32_t)0x000B0300) +#define RCC_RTCCLKSource_HSE_Div12 ((uint32_t)0x000C0300) +#define RCC_RTCCLKSource_HSE_Div13 ((uint32_t)0x000D0300) +#define RCC_RTCCLKSource_HSE_Div14 ((uint32_t)0x000E0300) +#define RCC_RTCCLKSource_HSE_Div15 ((uint32_t)0x000F0300) +#define RCC_RTCCLKSource_HSE_Div16 ((uint32_t)0x00100300) +#define RCC_RTCCLKSource_HSE_Div17 ((uint32_t)0x00110300) +#define RCC_RTCCLKSource_HSE_Div18 ((uint32_t)0x00120300) +#define RCC_RTCCLKSource_HSE_Div19 ((uint32_t)0x00130300) +#define RCC_RTCCLKSource_HSE_Div20 ((uint32_t)0x00140300) +#define RCC_RTCCLKSource_HSE_Div21 ((uint32_t)0x00150300) +#define RCC_RTCCLKSource_HSE_Div22 ((uint32_t)0x00160300) +#define RCC_RTCCLKSource_HSE_Div23 ((uint32_t)0x00170300) +#define RCC_RTCCLKSource_HSE_Div24 ((uint32_t)0x00180300) +#define RCC_RTCCLKSource_HSE_Div25 ((uint32_t)0x00190300) +#define RCC_RTCCLKSource_HSE_Div26 ((uint32_t)0x001A0300) +#define RCC_RTCCLKSource_HSE_Div27 ((uint32_t)0x001B0300) +#define RCC_RTCCLKSource_HSE_Div28 ((uint32_t)0x001C0300) +#define RCC_RTCCLKSource_HSE_Div29 ((uint32_t)0x001D0300) +#define RCC_RTCCLKSource_HSE_Div30 ((uint32_t)0x001E0300) +#define RCC_RTCCLKSource_HSE_Div31 ((uint32_t)0x001F0300) +#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ + ((SOURCE) == RCC_RTCCLKSource_LSI) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div2) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div3) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div4) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div5) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div6) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div7) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div8) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div9) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div10) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div11) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div12) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div13) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div14) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div15) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div16) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div17) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div18) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div19) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div20) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div21) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div22) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div23) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div24) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div25) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div26) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div27) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div28) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div29) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div30) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div31)) +/** + * @} + */ + +/** @defgroup RCC_I2S_Clock_Source + * @{ + */ +#define RCC_I2S2CLKSource_PLLI2S ((uint8_t)0x00) +#define RCC_I2S2CLKSource_Ext ((uint8_t)0x01) + +#define IS_RCC_I2SCLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_PLLI2S) || ((SOURCE) == RCC_I2S2CLKSource_Ext)) +/** + * @} + */ + +/** @defgroup RCC_AHB1_Peripherals + * @{ + */ +#define RCC_AHB1Periph_GPIOA ((uint32_t)0x00000001) +#define RCC_AHB1Periph_GPIOB ((uint32_t)0x00000002) +#define RCC_AHB1Periph_GPIOC ((uint32_t)0x00000004) +#define RCC_AHB1Periph_GPIOD ((uint32_t)0x00000008) +#define RCC_AHB1Periph_GPIOE ((uint32_t)0x00000010) +#define RCC_AHB1Periph_GPIOF ((uint32_t)0x00000020) +#define RCC_AHB1Periph_GPIOG ((uint32_t)0x00000040) +#define RCC_AHB1Periph_GPIOH ((uint32_t)0x00000080) +#define RCC_AHB1Periph_GPIOI ((uint32_t)0x00000100) +#define RCC_AHB1Periph_CRC ((uint32_t)0x00001000) +#define RCC_AHB1Periph_FLITF ((uint32_t)0x00008000) +#define RCC_AHB1Periph_SRAM1 ((uint32_t)0x00010000) +#define RCC_AHB1Periph_SRAM2 ((uint32_t)0x00020000) +#define RCC_AHB1Periph_BKPSRAM ((uint32_t)0x00040000) +#define RCC_AHB1Periph_CCMDATARAMEN ((uint32_t)0x00100000) +#define RCC_AHB1Periph_DMA1 ((uint32_t)0x00200000) +#define RCC_AHB1Periph_DMA2 ((uint32_t)0x00400000) +#define RCC_AHB1Periph_ETH_MAC ((uint32_t)0x02000000) +#define RCC_AHB1Periph_ETH_MAC_Tx ((uint32_t)0x04000000) +#define RCC_AHB1Periph_ETH_MAC_Rx ((uint32_t)0x08000000) +#define RCC_AHB1Periph_ETH_MAC_PTP ((uint32_t)0x10000000) +#define RCC_AHB1Periph_OTG_HS ((uint32_t)0x20000000) +#define RCC_AHB1Periph_OTG_HS_ULPI ((uint32_t)0x40000000) +#define IS_RCC_AHB1_CLOCK_PERIPH(PERIPH) ((((PERIPH) & 0x818BEE00) == 0x00) && ((PERIPH) != 0x00)) +#define IS_RCC_AHB1_RESET_PERIPH(PERIPH) ((((PERIPH) & 0xDD9FEE00) == 0x00) && ((PERIPH) != 0x00)) +#define IS_RCC_AHB1_LPMODE_PERIPH(PERIPH) ((((PERIPH) & 0x81986E00) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup RCC_AHB2_Peripherals + * @{ + */ +#define RCC_AHB2Periph_DCMI ((uint32_t)0x00000001) +#define RCC_AHB2Periph_CRYP ((uint32_t)0x00000010) +#define RCC_AHB2Periph_HASH ((uint32_t)0x00000020) +#define RCC_AHB2Periph_RNG ((uint32_t)0x00000040) +#define RCC_AHB2Periph_OTG_FS ((uint32_t)0x00000080) +#define IS_RCC_AHB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFF0E) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup RCC_AHB3_Peripherals + * @{ + */ +#define RCC_AHB3Periph_FSMC ((uint32_t)0x00000001) +#define IS_RCC_AHB3_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFFE) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup RCC_APB1_Peripherals + * @{ + */ +#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) +#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) +#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) +#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) +#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) +#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) +#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040) +#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080) +#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100) +#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) +#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) +#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) +#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) +#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) +#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) +#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) +#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) +#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) +#define RCC_APB1Periph_I2C3 ((uint32_t)0x00800000) +#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) +#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) +#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) +#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) +#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0xC9013600) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup RCC_APB2_Peripherals + * @{ + */ +#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000001) +#define RCC_APB2Periph_TIM8 ((uint32_t)0x00000002) +#define RCC_APB2Periph_USART1 ((uint32_t)0x00000010) +#define RCC_APB2Periph_USART6 ((uint32_t)0x00000020) +#define RCC_APB2Periph_ADC ((uint32_t)0x00000100) +#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000100) +#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000200) +#define RCC_APB2Periph_ADC3 ((uint32_t)0x00000400) +#define RCC_APB2Periph_SDIO ((uint32_t)0x00000800) +#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) +#define RCC_APB2Periph_SYSCFG ((uint32_t)0x00004000) +#define RCC_APB2Periph_TIM9 ((uint32_t)0x00010000) +#define RCC_APB2Periph_TIM10 ((uint32_t)0x00020000) +#define RCC_APB2Periph_TIM11 ((uint32_t)0x00040000) +#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFF8A0CC) == 0x00) && ((PERIPH) != 0x00)) +#define IS_RCC_APB2_RESET_PERIPH(PERIPH) ((((PERIPH) & 0xFFF8A6CC) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source_Prescaler + * @{ + */ +#define RCC_MCO1Source_HSI ((uint32_t)0x00000000) +#define RCC_MCO1Source_LSE ((uint32_t)0x00200000) +#define RCC_MCO1Source_HSE ((uint32_t)0x00400000) +#define RCC_MCO1Source_PLLCLK ((uint32_t)0x00600000) +#define RCC_MCO1Div_1 ((uint32_t)0x00000000) +#define RCC_MCO1Div_2 ((uint32_t)0x04000000) +#define RCC_MCO1Div_3 ((uint32_t)0x05000000) +#define RCC_MCO1Div_4 ((uint32_t)0x06000000) +#define RCC_MCO1Div_5 ((uint32_t)0x07000000) +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1Source_HSI) || ((SOURCE) == RCC_MCO1Source_LSE) || \ + ((SOURCE) == RCC_MCO1Source_HSE) || ((SOURCE) == RCC_MCO1Source_PLLCLK)) + +#define IS_RCC_MCO1DIV(DIV) (((DIV) == RCC_MCO1Div_1) || ((DIV) == RCC_MCO1Div_2) || \ + ((DIV) == RCC_MCO1Div_3) || ((DIV) == RCC_MCO1Div_4) || \ + ((DIV) == RCC_MCO1Div_5)) +/** + * @} + */ + +/** @defgroup RCC_MCO2_Clock_Source_Prescaler + * @{ + */ +#define RCC_MCO2Source_SYSCLK ((uint32_t)0x00000000) +#define RCC_MCO2Source_PLLI2SCLK ((uint32_t)0x40000000) +#define RCC_MCO2Source_HSE ((uint32_t)0x80000000) +#define RCC_MCO2Source_PLLCLK ((uint32_t)0xC0000000) +#define RCC_MCO2Div_1 ((uint32_t)0x00000000) +#define RCC_MCO2Div_2 ((uint32_t)0x20000000) +#define RCC_MCO2Div_3 ((uint32_t)0x28000000) +#define RCC_MCO2Div_4 ((uint32_t)0x30000000) +#define RCC_MCO2Div_5 ((uint32_t)0x38000000) +#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2Source_SYSCLK) || ((SOURCE) == RCC_MCO2Source_PLLI2SCLK)|| \ + ((SOURCE) == RCC_MCO2Source_HSE) || ((SOURCE) == RCC_MCO2Source_PLLCLK)) + +#define IS_RCC_MCO2DIV(DIV) (((DIV) == RCC_MCO2Div_1) || ((DIV) == RCC_MCO2Div_2) || \ + ((DIV) == RCC_MCO2Div_3) || ((DIV) == RCC_MCO2Div_4) || \ + ((DIV) == RCC_MCO2Div_5)) +/** + * @} + */ + +/** @defgroup RCC_Flag + * @{ + */ +#define RCC_FLAG_HSIRDY ((uint8_t)0x21) +#define RCC_FLAG_HSERDY ((uint8_t)0x31) +#define RCC_FLAG_PLLRDY ((uint8_t)0x39) +#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B) +#define RCC_FLAG_LSERDY ((uint8_t)0x41) +#define RCC_FLAG_LSIRDY ((uint8_t)0x61) +#define RCC_FLAG_BORRST ((uint8_t)0x79) +#define RCC_FLAG_PINRST ((uint8_t)0x7A) +#define RCC_FLAG_PORRST ((uint8_t)0x7B) +#define RCC_FLAG_SFTRST ((uint8_t)0x7C) +#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) +#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) +#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) +#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_BORRST) || \ + ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \ + ((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDGRST)|| \ + ((FLAG) == RCC_FLAG_WWDGRST)|| ((FLAG) == RCC_FLAG_LPWRRST)|| \ + ((FLAG) == RCC_FLAG_PLLI2SRDY)) +#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the RCC clock configuration to the default reset state */ +void RCC_DeInit(void); + +/* Internal/external clocks, PLL, CSS and MCO configuration functions *********/ +void RCC_HSEConfig(uint8_t RCC_HSE); +ErrorStatus RCC_WaitForHSEStartUp(void); +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); +void RCC_HSICmd(FunctionalState NewState); +void RCC_LSEConfig(uint8_t RCC_LSE); +void RCC_LSICmd(FunctionalState NewState); + +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP, uint32_t PLLQ); +void RCC_PLLCmd(FunctionalState NewState); +void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SR); +void RCC_PLLI2SCmd(FunctionalState NewState); + +void RCC_ClockSecuritySystemCmd(FunctionalState NewState); +void RCC_MCO1Config(uint32_t RCC_MCO1Source, uint32_t RCC_MCO1Div); +void RCC_MCO2Config(uint32_t RCC_MCO2Source, uint32_t RCC_MCO2Div); + +/* System, AHB and APB busses clocks configuration functions ******************/ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); +uint8_t RCC_GetSYSCLKSource(void); +void RCC_HCLKConfig(uint32_t RCC_SYSCLK); +void RCC_PCLK1Config(uint32_t RCC_HCLK); +void RCC_PCLK2Config(uint32_t RCC_HCLK); +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); + +/* Peripheral clocks configuration functions **********************************/ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); +void RCC_RTCCLKCmd(FunctionalState NewState); +void RCC_BackupResetCmd(FunctionalState NewState); +void RCC_I2SCLKConfig(uint32_t RCC_I2SCLKSource); + +void RCC_AHB1PeriphClockCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState); +void RCC_AHB2PeriphClockCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState); +void RCC_AHB3PeriphClockCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState); +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); + +void RCC_AHB1PeriphResetCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState); +void RCC_AHB2PeriphResetCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState); +void RCC_AHB3PeriphResetCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState); +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); + +void RCC_AHB1PeriphClockLPModeCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState); +void RCC_AHB2PeriphClockLPModeCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState); +void RCC_AHB3PeriphClockLPModeCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState); +void RCC_APB1PeriphClockLPModeCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_APB2PeriphClockLPModeCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); +void RCC_ClearFlag(void); +ITStatus RCC_GetITStatus(uint8_t RCC_IT); +void RCC_ClearITPendingBit(uint8_t RCC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_RCC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.c new file mode 100644 index 00000000000..05f428d369c --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.c @@ -0,0 +1,400 @@ +/** + ****************************************************************************** + * @file stm32f4xx_rng.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Random Number Generator (RNG) peripheral: + * - Initialization and Configuration + * - Get 32 bit Random number + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. Enable The RNG controller clock using + * RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE) function. + * + * 2. Activate the RNG peripheral using RNG_Cmd() function. + * + * 3. Wait until the 32 bit Random number Generator contains a valid + * random data (using polling/interrupt mode). For more details, + * refer to "Interrupts and flags management functions" module + * description. + * + * 4. Get the 32 bit Random number using RNG_GetRandomNumber() function + * + * 5. To get another 32 bit Random number, go to step 3. + * + * + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_rng.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup RNG + * @brief RNG driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RNG_Private_Functions + * @{ + */ + +/** @defgroup RNG_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + This section provides functions allowing to + - Initialize the RNG peripheral + - Enable or disable the RNG peripheral + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the RNG peripheral registers to their default reset values. + * @param None + * @retval None + */ +void RNG_DeInit(void) +{ + /* Enable RNG reset state */ + RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, ENABLE); + + /* Release RNG from reset state */ + RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, DISABLE); +} + +/** + * @brief Enables or disables the RNG peripheral. + * @param NewState: new state of the RNG peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RNG_Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the RNG */ + RNG->CR |= RNG_CR_RNGEN; + } + else + { + /* Disable the RNG */ + RNG->CR &= ~RNG_CR_RNGEN; + } +} +/** + * @} + */ + +/** @defgroup RNG_Group2 Get 32 bit Random number function + * @brief Get 32 bit Random number function + * + +@verbatim + =============================================================================== + Get 32 bit Random number function + =============================================================================== + This section provides a function allowing to get the 32 bit Random number + + @note Before to call this function you have to wait till DRDY flag is set, + using RNG_GetFlagStatus(RNG_FLAG_DRDY) function. + +@endverbatim + * @{ + */ + + +/** + * @brief Returns a 32-bit random number. + * + * @note Before to call this function you have to wait till DRDY (data ready) + * flag is set, using RNG_GetFlagStatus(RNG_FLAG_DRDY) function. + * @note Each time the the Random number data is read (using RNG_GetRandomNumber() + * function), the RNG_FLAG_DRDY flag is automatically cleared. + * @note In the case of a seed error, the generation of random numbers is + * interrupted for as long as the SECS bit is '1'. If a number is + * available in the RNG_DR register, it must not be used because it may + * not have enough entropy. In this case, it is recommended to clear the + * SEIS bit(using RNG_ClearFlag(RNG_FLAG_SECS) function), then disable + * and enable the RNG peripheral (using RNG_Cmd() function) to + * reinitialize and restart the RNG. + * @note In the case of a clock error, the RNG is no more able to generate + * random numbers because the PLL48CLK clock is not correct. User have + * to check that the clock controller is correctly configured to provide + * the RNG clock and clear the CEIS bit (using RNG_ClearFlag(RNG_FLAG_CECS) + * function) . The clock error has no impact on the previously generated + * random numbers, and the RNG_DR register contents can be used. + * + * @param None + * @retval 32-bit random number. + */ +uint32_t RNG_GetRandomNumber(void) +{ + /* Return the 32 bit random number from the DR register */ + return RNG->DR; +} + + +/** + * @} + */ + +/** @defgroup RNG_Group3 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + + This section provides functions allowing to configure the RNG Interrupts and + to get the status and clear flags and Interrupts pending bits. + + The RNG provides 3 Interrupts sources and 3 Flags: + + Flags : + ---------- + 1. RNG_FLAG_DRDY : In the case of the RNG_DR register contains valid + random data. it is cleared by reading the valid data + (using RNG_GetRandomNumber() function). + + 2. RNG_FLAG_CECS : In the case of a seed error detection. + + 3. RNG_FLAG_SECS : In the case of a clock error detection. + + + Interrupts : + ------------ + if enabled, an RNG interrupt is pending : + + 1. In the case of the RNG_DR register contains valid random data. + This interrupt source is cleared once the RNG_DR register has been read + (using RNG_GetRandomNumber() function) until a new valid value is + computed. + + or + 2. In the case of a seed error : One of the following faulty sequences has + been detected: + - More than 64 consecutive bits at the same value (0 or 1) + - More than 32 consecutive alternance of 0 and 1 (0101010101...01) + This interrupt source is cleared using RNG_ClearITPendingBit(RNG_IT_SEI) + function. + + or + 3. In the case of a clock error : the PLL48CLK (RNG peripheral clock source) + was not correctly detected (fPLL48CLK< fHCLK/16). + This interrupt source is cleared using RNG_ClearITPendingBit(RNG_IT_CEI) + function. + @note In this case, User have to check that the clock controller is + correctly configured to provide the RNG clock. + + Managing the RNG controller events : + ------------------------------------ + The user should identify which mode will be used in his application to manage + the RNG controller events: Polling mode or Interrupt mode. + + 1. In the Polling Mode it is advised to use the following functions: + - RNG_GetFlagStatus() : to check if flags events occur. + - RNG_ClearFlag() : to clear the flags events. + + @note RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag(). it is cleared only + by reading the Random number data. + + 2. In the Interrupt Mode it is advised to use the following functions: + - RNG_ITConfig() : to enable or disable the interrupt source. + - RNG_GetITStatus() : to check if Interrupt occurs. + - RNG_ClearITPendingBit() : to clear the Interrupt pending Bit + (corresponding Flag). + + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the RNG interrupt. + * @note The RNG provides 3 interrupt sources, + * - Computed data is ready event (DRDY), and + * - Seed error Interrupt (SEI) and + * - Clock error Interrupt (CEI), + * all these interrupts sources are enabled by setting the IE bit in + * CR register. However, each interrupt have its specific status bit + * (see RNG_GetITStatus() function) and clear bit except the DRDY event + * (see RNG_ClearITPendingBit() function). + * @param NewState: new state of the RNG interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RNG_ITConfig(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the RNG interrupt */ + RNG->CR |= RNG_CR_IE; + } + else + { + /* Disable the RNG interrupt */ + RNG->CR &= ~RNG_CR_IE; + } +} + +/** + * @brief Checks whether the specified RNG flag is set or not. + * @param RNG_FLAG: specifies the RNG flag to check. + * This parameter can be one of the following values: + * @arg RNG_FLAG_DRDY: Data Ready flag. + * @arg RNG_FLAG_CECS: Clock Error Current flag. + * @arg RNG_FLAG_SECS: Seed Error Current flag. + * @retval The new state of RNG_FLAG (SET or RESET). + */ +FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RNG_GET_FLAG(RNG_FLAG)); + + /* Check the status of the specified RNG flag */ + if ((RNG->SR & RNG_FLAG) != (uint8_t)RESET) + { + /* RNG_FLAG is set */ + bitstatus = SET; + } + else + { + /* RNG_FLAG is reset */ + bitstatus = RESET; + } + /* Return the RNG_FLAG status */ + return bitstatus; +} + + +/** + * @brief Clears the RNG flags. + * @param RNG_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg RNG_FLAG_CECS: Clock Error Current flag. + * @arg RNG_FLAG_SECS: Seed Error Current flag. + * @note RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag() function. + * This flag is cleared only by reading the Random number data (using + * RNG_GetRandomNumber() function). + * @retval None + */ +void RNG_ClearFlag(uint8_t RNG_FLAG) +{ + /* Check the parameters */ + assert_param(IS_RNG_CLEAR_FLAG(RNG_FLAG)); + /* Clear the selected RNG flags */ + RNG->SR = ~(uint32_t)(((uint32_t)RNG_FLAG) << 4); +} + +/** + * @brief Checks whether the specified RNG interrupt has occurred or not. + * @param RNG_IT: specifies the RNG interrupt source to check. + * This parameter can be one of the following values: + * @arg RNG_IT_CEI: Clock Error Interrupt. + * @arg RNG_IT_SEI: Seed Error Interrupt. + * @retval The new state of RNG_IT (SET or RESET). + */ +ITStatus RNG_GetITStatus(uint8_t RNG_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RNG_GET_IT(RNG_IT)); + + /* Check the status of the specified RNG interrupt */ + if ((RNG->SR & RNG_IT) != (uint8_t)RESET) + { + /* RNG_IT is set */ + bitstatus = SET; + } + else + { + /* RNG_IT is reset */ + bitstatus = RESET; + } + /* Return the RNG_IT status */ + return bitstatus; +} + + +/** + * @brief Clears the RNG interrupt pending bit(s). + * @param RNG_IT: specifies the RNG interrupt pending bit(s) to clear. + * This parameter can be any combination of the following values: + * @arg RNG_IT_CEI: Clock Error Interrupt. + * @arg RNG_IT_SEI: Seed Error Interrupt. + * @retval None + */ +void RNG_ClearITPendingBit(uint8_t RNG_IT) +{ + /* Check the parameters */ + assert_param(IS_RNG_IT(RNG_IT)); + + /* Clear the selected RNG interrupt pending bit */ + RNG->SR = (uint8_t)~RNG_IT; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.h new file mode 100644 index 00000000000..5e4703ee1f1 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rng.h @@ -0,0 +1,114 @@ +/** + ****************************************************************************** + * @file stm32f4xx_rng.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the Random + * Number Generator(RNG) firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_RNG_H +#define __STM32F4xx_RNG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RNG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RNG_Exported_Constants + * @{ + */ + +/** @defgroup RNG_flags_definition + * @{ + */ +#define RNG_FLAG_DRDY ((uint8_t)0x0001) /*!< Data ready */ +#define RNG_FLAG_CECS ((uint8_t)0x0002) /*!< Clock error current status */ +#define RNG_FLAG_SECS ((uint8_t)0x0004) /*!< Seed error current status */ + +#define IS_RNG_GET_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_DRDY) || \ + ((RNG_FLAG) == RNG_FLAG_CECS) || \ + ((RNG_FLAG) == RNG_FLAG_SECS)) +#define IS_RNG_CLEAR_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_CECS) || \ + ((RNG_FLAG) == RNG_FLAG_SECS)) +/** + * @} + */ + +/** @defgroup RNG_interrupts_definition + * @{ + */ +#define RNG_IT_CEI ((uint8_t)0x20) /*!< Clock error interrupt */ +#define RNG_IT_SEI ((uint8_t)0x40) /*!< Seed error interrupt */ + +#define IS_RNG_IT(IT) ((((IT) & (uint8_t)0x9F) == 0x00) && ((IT) != 0x00)) +#define IS_RNG_GET_IT(RNG_IT) (((RNG_IT) == RNG_IT_CEI) || ((RNG_IT) == RNG_IT_SEI)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the RNG configuration to the default reset state *****/ +void RNG_DeInit(void); + +/* Configuration function *****************************************************/ +void RNG_Cmd(FunctionalState NewState); + +/* Get 32 bit Random number function ******************************************/ +uint32_t RNG_GetRandomNumber(void); + +/* Interrupts and flags management functions **********************************/ +void RNG_ITConfig(FunctionalState NewState); +FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG); +void RNG_ClearFlag(uint8_t RNG_FLAG); +ITStatus RNG_GetITStatus(uint8_t RNG_IT); +void RNG_ClearITPendingBit(uint8_t RNG_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_RNG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.c new file mode 100644 index 00000000000..0ab10cef042 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.c @@ -0,0 +1,2733 @@ +/** + ****************************************************************************** + * @file stm32f4xx_rtc.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Real-Time Clock (RTC) peripheral: + * - Initialization + * - Calendar (Time and Date) configuration + * - Alarms (Alarm A and Alarm B) configuration + * - WakeUp Timer configuration + * - Daylight Saving configuration + * - Output pin Configuration + * - Coarse digital Calibration configuration + * - Smooth digital Calibration configuration + * - TimeStamp configuration + * - Tampers configuration + * - Backup Data Registers configuration + * - Shift control synchronisation + * - RTC Tamper and TimeStamp Pins Selection and Output Type Config configuration + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * Backup Domain Operating Condition + * =================================================================== + * The real-time clock (RTC), the RTC backup registers, and the backup + * SRAM (BKP SRAM) can be powered from the VBAT voltage when the main + * VDD supply is powered off. + * To retain the content of the RTC backup registers, backup SRAM, + * and supply the RTC when VDD is turned off, VBAT pin can be connected + * to an optional standby voltage supplied by a battery or by another + * source. + * + * To allow the RTC to operate even when the main digital supply (VDD) + * is turned off, the VBAT pin powers the following blocks: + * 1 - The RTC + * 2 - The LSE oscillator + * 3 - The backup SRAM when the low power backup regulator is enabled + * 4 - PC13 to PC15 I/Os, plus PI8 I/O (when available) + * + * When the backup domain is supplied by VDD (analog switch connected + * to VDD), the following functions are available: + * 1 - PC14 and PC15 can be used as either GPIO or LSE pins + * 2 - PC13 can be used as a GPIO or as the RTC_AF1 pin + * 3 - PI8 can be used as a GPIO or as the RTC_AF2 pin + * + * When the backup domain is supplied by VBAT (analog switch connected + * to VBAT because VDD is not present), the following functions are available: + * 1 - PC14 and PC15 can be used as LSE pins only + * 2 - PC13 can be used as the RTC_AF1 pin + * 3 - PI8 can be used as the RTC_AF2 pin + * + * =================================================================== + * Backup Domain Reset + * =================================================================== + * The backup domain reset sets all RTC registers and the RCC_BDCR + * register to their reset values. The BKPSRAM is not affected by this + * reset. The only way of resetting the BKPSRAM is through the Flash + * interface by requesting a protection level change from 1 to 0. + * A backup domain reset is generated when one of the following events + * occurs: + * 1 - Software reset, triggered by setting the BDRST bit in the + * RCC Backup domain control register (RCC_BDCR). You can use the + * RCC_BackupResetCmd(). + * 2 - VDD or VBAT power on, if both supplies have previously been + * powered off. + * + * =================================================================== + * Backup Domain Access + * =================================================================== + * After reset, the backup domain (RTC registers, RTC backup data + * registers and backup SRAM) is protected against possible unwanted + * write accesses. + * To enable access to the RTC Domain and RTC registers, proceed as follows: + * - Enable the Power Controller (PWR) APB1 interface clock using the + * RCC_APB1PeriphClockCmd() function. + * - Enable access to RTC domain using the PWR_BackupAccessCmd() function. + * - Select the RTC clock source using the RCC_RTCCLKConfig() function. + * - Enable RTC Clock using the RCC_RTCCLKCmd() function. + * + * =================================================================== + * RTC Driver: how to use it + * =================================================================== + * - Enable the RTC domain access (see description in the section above) + * - Configure the RTC Prescaler (Asynchronous and Synchronous) and + * RTC hour format using the RTC_Init() function. + * + * Time and Date configuration + * =========================== + * - To configure the RTC Calendar (Time and Date) use the RTC_SetTime() + * and RTC_SetDate() functions. + * - To read the RTC Calendar, use the RTC_GetTime() and RTC_GetDate() + * functions. + * - Use the RTC_DayLightSavingConfig() function to add or sub one + * hour to the RTC Calendar. + * + * Alarm configuration + * =================== + * - To configure the RTC Alarm use the RTC_SetAlarm() function. + * - Enable the selected RTC Alarm using the RTC_AlarmCmd() function + * - To read the RTC Alarm, use the RTC_GetAlarm() function. + * - To read the RTC alarm SubSecond, use the RTC_GetAlarmSubSecond() function. + * + * RTC Wakeup configuration + * ======================== + * - Configure the RTC Wakeup Clock source use the RTC_WakeUpClockConfig() + * function. + * - Configure the RTC WakeUp Counter using the RTC_SetWakeUpCounter() + * function + * - Enable the RTC WakeUp using the RTC_WakeUpCmd() function + * - To read the RTC WakeUp Counter register, use the RTC_GetWakeUpCounter() + * function. + * + * Outputs configuration + * ===================== + * The RTC has 2 different outputs: + * - AFO_ALARM: this output is used to manage the RTC Alarm A, Alarm B + * and WaKeUp signals. + * To output the selected RTC signal on RTC_AF1 pin, use the + * RTC_OutputConfig() function. + * - AFO_CALIB: this output is 512Hz signal or 1Hz . + * To output the RTC Clock on RTC_AF1 pin, use the RTC_CalibOutputCmd() + * function. + * + * Smooth digital Calibration configuration + * ================================= + * - Configure the RTC Original Digital Calibration Value and the corresponding + * calibration cycle period (32s,16s and 8s) using the RTC_SmoothCalibConfig() + * function. + * + * Coarse digital Calibration configuration + * ================================= + * - Configure the RTC Coarse Calibration Value and the corresponding + * sign using the RTC_CoarseCalibConfig() function. + * - Enable the RTC Coarse Calibration using the RTC_CoarseCalibCmd() + * function + * + * TimeStamp configuration + * ======================= + * - Configure the RTC_AF1 trigger and enables the RTC TimeStamp + * using the RTC_TimeStampCmd() function. + * - To read the RTC TimeStamp Time and Date register, use the + * RTC_GetTimeStamp() function. + * - To read the RTC TimeStamp SubSecond register, use the + * RTC_GetTimeStampSubSecond() function. + * - The TAMPER1 alternate function can be mapped either to RTC_AF1(PC13) + * or RTC_AF2 (PI8) depending on the value of TAMP1INSEL bit in + * RTC_TAFCR register. You can use the RTC_TamperPinSelection() + * function to select the corresponding pin. + * + * Tamper configuration + * ==================== + * - Enable the RTC Tamper using the RTC_TamperCmd() function. + * - Configure the Tamper filter count using RTC_TamperFilterConfig() + * function. + * - Configure the RTC Tamper trigger Edge or Level according to the Tamper + * filter (if equal to 0 Edge else Level) value using the RTC_TamperConfig() function. + * - Configure the Tamper sampling frequency using RTC_TamperSamplingFreqConfig() + * function. + * - Configure the Tamper precharge or discharge duration using + * RTC_TamperPinsPrechargeDuration() function. + * - Enable the Tamper Pull-UP using RTC_TamperPullUpDisableCmd() function. + * - Enable the Time stamp on Tamper detection event using + * RTC_TSOnTamperDetecCmd() function. + * - The TIMESTAMP alternate function can be mapped to either RTC_AF1 + * or RTC_AF2 depending on the value of the TSINSEL bit in the + * RTC_TAFCR register. You can use the RTC_TimeStampPinSelection() + * function to select the corresponding pin. + * + * Backup Data Registers configuration + * =================================== + * - To write to the RTC Backup Data registers, use the RTC_WriteBackupRegister() + * function. + * - To read the RTC Backup Data registers, use the RTC_ReadBackupRegister() + * function. + * + * =================================================================== + * RTC and low power modes + * =================================================================== + * The MCU can be woken up from a low power mode by an RTC alternate + * function. + * The RTC alternate functions are the RTC alarms (Alarm A and Alarm B), + * RTC wakeup, RTC tamper event detection and RTC time stamp event detection. + * These RTC alternate functions can wake up the system from the Stop + * and Standby lowpower modes. + * The system can also wake up from low power modes without depending + * on an external interrupt (Auto-wakeup mode), by using the RTC alarm + * or the RTC wakeup events. + * The RTC provides a programmable time base for waking up from the + * Stop or Standby mode at regular intervals. + * Wakeup from STOP and Standby modes is possible only when the RTC + * clock source is LSE or LSI. + * + * =================================================================== + * Selection of RTC_AF1 alternate functions + * =================================================================== + * The RTC_AF1 pin (PC13) can be used for the following purposes: + * - AFO_ALARM output + * - AFO_CALIB output + * - AFI_TAMPER + * - AFI_TIMESTAMP + * + * +-------------------------------------------------------------------------------------------------------------+ + * | Pin |AFO_ALARM |AFO_CALIB |AFI_TAMPER |AFI_TIMESTAMP | TAMP1INSEL | TSINSEL |ALARMOUTTYPE | + * | configuration | ENABLED | ENABLED | ENABLED | ENABLED |TAMPER1 pin |TIMESTAMP pin | AFO_ALARM | + * | and function | | | | | selection | selection |Configuration | + * |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| + * | Alarm out | | | | | Don't | Don't | | + * | output OD | 1 |Don't care|Don't care | Don't care | care | care | 0 | + * |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| + * | Alarm out | | | | | Don't | Don't | | + * | output PP | 1 |Don't care|Don't care | Don't care | care | care | 1 | + * |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| + * | Calibration out | | | | | Don't | Don't | | + * | output PP | 0 | 1 |Don't care | Don't care | care | care | Don't care | + * |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| + * | TAMPER input | | | | | | Don't | | + * | floating | 0 | 0 | 1 | 0 | 0 | care | Don't care | + * |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| + * | TIMESTAMP and | | | | | | | | + * | TAMPER input | 0 | 0 | 1 | 1 | 0 | 0 | Don't care | + * | floating | | | | | | | | + * |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| + * | TIMESTAMP input | | | | | Don't | | | + * | floating | 0 | 0 | 0 | 1 | care | 0 | Don't care | + * |-----------------|----------|----------|-----------|--------------|------------|--------------|--------------| + * | Standard GPIO | 0 | 0 | 0 | 0 | Don't care | Don't care | Don't care | + * +-------------------------------------------------------------------------------------------------------------+ + * + * + * =================================================================== + * Selection of RTC_AF2 alternate functions + * =================================================================== + * The RTC_AF2 pin (PI8) can be used for the following purposes: + * - AFI_TAMPER + * - AFI_TIMESTAMP + * + * +---------------------------------------------------------------------------------------+ + * | Pin |AFI_TAMPER |AFI_TIMESTAMP | TAMP1INSEL | TSINSEL |ALARMOUTTYPE | + * | configuration | ENABLED | ENABLED |TAMPER1 pin |TIMESTAMP pin | AFO_ALARM | + * | and function | | | selection | selection |Configuration | + * |-----------------|-----------|--------------|------------|--------------|--------------| + * | TAMPER input | | | | Don't | | + * | floating | 1 | 0 | 1 | care | Don't care | + * |-----------------|-----------|--------------|------------|--------------|--------------| + * | TIMESTAMP and | | | | | | + * | TAMPER input | 1 | 1 | 1 | 1 | Don't care | + * | floating | | | | | | + * |-----------------|-----------|--------------|------------|--------------|--------------| + * | TIMESTAMP input | | | Don't | | | + * | floating | 0 | 1 | care | 1 | Don't care | + * |-----------------|-----------|--------------|------------|--------------|--------------| + * | Standard GPIO | 0 | 0 | Don't care | Don't care | Don't care | + * +---------------------------------------------------------------------------------------+ + * + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_rtc.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup RTC + * @brief RTC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Masks Definition */ +#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F) +#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F) +#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF) +#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F) +#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \ + RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \ + RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \ + RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F )) + +#define INITMODE_TIMEOUT ((uint32_t) 0x00010000) +#define SYNCHRO_TIMEOUT ((uint32_t) 0x00020000) +#define RECALPF_TIMEOUT ((uint32_t) 0x00020000) +#define SHPF_TIMEOUT ((uint32_t) 0x00001000) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static uint8_t RTC_ByteToBcd2(uint8_t Value); +static uint8_t RTC_Bcd2ToByte(uint8_t Value); + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RTC_Private_Functions + * @{ + */ + +/** @defgroup RTC_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + + This section provide functions allowing to initialize and configure the RTC + Prescaler (Synchronous and Asynchronous), RTC Hour format, disable RTC registers + Write protection, enter and exit the RTC initialization mode, RTC registers + synchronization check and reference clock detection enable. + + 1. The RTC Prescaler is programmed to generate the RTC 1Hz time base. It is + split into 2 programmable prescalers to minimize power consumption. + - A 7-bit asynchronous prescaler and A 13-bit synchronous prescaler. + - When both prescalers are used, it is recommended to configure the asynchronous + prescaler to a high value to minimize consumption. + + 2. All RTC registers are Write protected. Writing to the RTC registers + is enabled by writing a key into the Write Protection register, RTC_WPR. + + 3. To Configure the RTC Calendar, user application should enter initialization + mode. In this mode, the calendar counter is stopped and its value can be + updated. When the initialization sequence is complete, the calendar restarts + counting after 4 RTCCLK cycles. + + 4. To read the calendar through the shadow registers after Calendar initialization, + calendar update or after wakeup from low power modes the software must first + clear the RSF flag. The software must then wait until it is set again before + reading the calendar, which means that the calendar registers have been + correctly copied into the RTC_TR and RTC_DR shadow registers. + The RTC_WaitForSynchro() function implements the above software sequence + (RSF clear and RSF check). + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the RTC registers to their default reset values. + * @note This function doesn't reset the RTC Clock source and RTC Backup Data + * registers. + * @param None + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are deinitialized + * - ERROR: RTC registers are not deinitialized + */ +ErrorStatus RTC_DeInit(void) +{ + __IO uint32_t wutcounter = 0x00; + uint32_t wutwfstatus = 0x00; + ErrorStatus status = ERROR; + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + /* Reset TR, DR and CR registers */ + RTC->TR = (uint32_t)0x00000000; + RTC->DR = (uint32_t)0x00002101; + /* Reset All CR bits except CR[2:0] */ + RTC->CR &= (uint32_t)0x00000007; + + /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ + do + { + wutwfstatus = RTC->ISR & RTC_ISR_WUTWF; + wutcounter++; + } while((wutcounter != INITMODE_TIMEOUT) && (wutwfstatus == 0x00)); + + if ((RTC->ISR & RTC_ISR_WUTWF) == RESET) + { + status = ERROR; + } + else + { + /* Reset all RTC CR register bits */ + RTC->CR &= (uint32_t)0x00000000; + RTC->WUTR = (uint32_t)0x0000FFFF; + RTC->PRER = (uint32_t)0x007F00FF; + RTC->CALIBR = (uint32_t)0x00000000; + RTC->ALRMAR = (uint32_t)0x00000000; + RTC->ALRMBR = (uint32_t)0x00000000; + + /* Reset ISR register and exit initialization mode */ + RTC->ISR = (uint32_t)0x00000000; + + /* Reset Tamper and alternate functions configuration register */ + RTC->TAFCR = 0x00000000; + + if(RTC_WaitForSynchro() == ERROR) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Initializes the RTC registers according to the specified parameters + * in RTC_InitStruct. + * @param RTC_InitStruct: pointer to a RTC_InitTypeDef structure that contains + * the configuration information for the RTC peripheral. + * @note The RTC Prescaler register is write protected and can be written in + * initialization mode only. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are initialized + * - ERROR: RTC registers are not initialized + */ +ErrorStatus RTC_Init(RTC_InitTypeDef* RTC_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_HOUR_FORMAT(RTC_InitStruct->RTC_HourFormat)); + assert_param(IS_RTC_ASYNCH_PREDIV(RTC_InitStruct->RTC_AsynchPrediv)); + assert_param(IS_RTC_SYNCH_PREDIV(RTC_InitStruct->RTC_SynchPrediv)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + /* Clear RTC CR FMT Bit */ + RTC->CR &= ((uint32_t)~(RTC_CR_FMT)); + /* Set RTC_CR register */ + RTC->CR |= ((uint32_t)(RTC_InitStruct->RTC_HourFormat)); + + /* Configure the RTC PRER */ + RTC->PRER = (uint32_t)(RTC_InitStruct->RTC_SynchPrediv); + RTC->PRER |= (uint32_t)(RTC_InitStruct->RTC_AsynchPrediv << 16); + + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + status = SUCCESS; + } + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Fills each RTC_InitStruct member with its default value. + * @param RTC_InitStruct: pointer to a RTC_InitTypeDef structure which will be + * initialized. + * @retval None + */ +void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct) +{ + /* Initialize the RTC_HourFormat member */ + RTC_InitStruct->RTC_HourFormat = RTC_HourFormat_24; + + /* Initialize the RTC_AsynchPrediv member */ + RTC_InitStruct->RTC_AsynchPrediv = (uint32_t)0x7F; + + /* Initialize the RTC_SynchPrediv member */ + RTC_InitStruct->RTC_SynchPrediv = (uint32_t)0xFF; +} + +/** + * @brief Enables or disables the RTC registers write protection. + * @note All the RTC registers are write protected except for RTC_ISR[13:8], + * RTC_TAFCR and RTC_BKPxR. + * @note Writing a wrong key reactivates the write protection. + * @note The protection mechanism is not affected by system reset. + * @param NewState: new state of the write protection. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_WriteProtectionCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + } + else + { + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + } +} + +/** + * @brief Enters the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * RTC_WriteProtectionCmd(DISABLE) before calling this function. + * @param None + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC is in Init mode + * - ERROR: RTC is not in Init mode + */ +ErrorStatus RTC_EnterInitMode(void) +{ + __IO uint32_t initcounter = 0x00; + ErrorStatus status = ERROR; + uint32_t initstatus = 0x00; + + /* Check if the Initialization mode is set */ + if ((RTC->ISR & RTC_ISR_INITF) == (uint32_t)RESET) + { + /* Set the Initialization mode */ + RTC->ISR = (uint32_t)RTC_INIT_MASK; + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + do + { + initstatus = RTC->ISR & RTC_ISR_INITF; + initcounter++; + } while((initcounter != INITMODE_TIMEOUT) && (initstatus == 0x00)); + + if ((RTC->ISR & RTC_ISR_INITF) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + } + else + { + status = SUCCESS; + } + + return (status); +} + +/** + * @brief Exits the RTC Initialization mode. + * @note When the initialization sequence is complete, the calendar restarts + * counting after 4 RTCCLK cycles. + * @note The RTC Initialization mode is write protected, use the + * RTC_WriteProtectionCmd(DISABLE) before calling this function. + * @param None + * @retval None + */ +void RTC_ExitInitMode(void) +{ + /* Exit Initialization mode */ + RTC->ISR &= (uint32_t)~RTC_ISR_INIT; +} + +/** + * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * RTC_WriteProtectionCmd(DISABLE) before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param None + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are synchronised + * - ERROR: RTC registers are not synchronised + */ +ErrorStatus RTC_WaitForSynchro(void) +{ + __IO uint32_t synchrocounter = 0; + ErrorStatus status = ERROR; + uint32_t synchrostatus = 0x00; + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Clear RSF flag */ + RTC->ISR &= (uint32_t)RTC_RSF_MASK; + + /* Wait the registers to be synchronised */ + do + { + synchrostatus = RTC->ISR & RTC_ISR_RSF; + synchrocounter++; + } while((synchrocounter != SYNCHRO_TIMEOUT) && (synchrostatus == 0x00)); + + if ((RTC->ISR & RTC_ISR_RSF) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return (status); +} + +/** + * @brief Enables or disables the RTC reference clock detection. + * @param NewState: new state of the RTC reference clock. + * This parameter can be: ENABLE or DISABLE. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC reference clock detection is enabled + * - ERROR: RTC reference clock detection is disabled + */ +ErrorStatus RTC_RefClockCmd(FunctionalState NewState) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + if (NewState != DISABLE) + { + /* Enable the RTC reference clock detection */ + RTC->CR |= RTC_CR_REFCKON; + } + else + { + /* Disable the RTC reference clock detection */ + RTC->CR &= ~RTC_CR_REFCKON; + } + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + status = SUCCESS; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Enables or Disables the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param NewState: new state of the Bypass Shadow feature. + * This parameter can be: ENABLE or DISABLE. + * @retval None +*/ +void RTC_BypassShadowCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + if (NewState != DISABLE) + { + /* Set the BYPSHAD bit */ + RTC->CR |= (uint8_t)RTC_CR_BYPSHAD; + } + else + { + /* Reset the BYPSHAD bit */ + RTC->CR &= (uint8_t)~RTC_CR_BYPSHAD; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @} + */ + +/** @defgroup RTC_Group2 Time and Date configuration functions + * @brief Time and Date configuration functions + * +@verbatim + =============================================================================== + Time and Date configuration functions + =============================================================================== + + This section provide functions allowing to program and read the RTC Calendar + (Time and Date). + +@endverbatim + * @{ + */ + +/** + * @brief Set the RTC current time. + * @param RTC_Format: specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_TimeStruct: pointer to a RTC_TimeTypeDef structure that contains + * the time configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Time register is configured + * - ERROR: RTC Time register is not configured + */ +ErrorStatus RTC_SetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct) +{ + uint32_t tmpreg = 0; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + if (RTC_Format == RTC_Format_BIN) + { + if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + assert_param(IS_RTC_HOUR12(RTC_TimeStruct->RTC_Hours)); + assert_param(IS_RTC_H12(RTC_TimeStruct->RTC_H12)); + } + else + { + RTC_TimeStruct->RTC_H12 = 0x00; + assert_param(IS_RTC_HOUR24(RTC_TimeStruct->RTC_Hours)); + } + assert_param(IS_RTC_MINUTES(RTC_TimeStruct->RTC_Minutes)); + assert_param(IS_RTC_SECONDS(RTC_TimeStruct->RTC_Seconds)); + } + else + { + if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + tmpreg = RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Hours); + assert_param(IS_RTC_HOUR12(tmpreg)); + assert_param(IS_RTC_H12(RTC_TimeStruct->RTC_H12)); + } + else + { + RTC_TimeStruct->RTC_H12 = 0x00; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Hours))); + } + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Seconds))); + } + + /* Check the input parameters format */ + if (RTC_Format != RTC_Format_BIN) + { + tmpreg = (((uint32_t)(RTC_TimeStruct->RTC_Hours) << 16) | \ + ((uint32_t)(RTC_TimeStruct->RTC_Minutes) << 8) | \ + ((uint32_t)RTC_TimeStruct->RTC_Seconds) | \ + ((uint32_t)(RTC_TimeStruct->RTC_H12) << 16)); + } + else + { + tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(RTC_TimeStruct->RTC_Hours) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_TimeStruct->RTC_Minutes) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_TimeStruct->RTC_Seconds)) | \ + (((uint32_t)RTC_TimeStruct->RTC_H12) << 16)); + } + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + /* Set the RTC_TR register */ + RTC->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); + + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + if(RTC_WaitForSynchro() == ERROR) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + + } + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Fills each RTC_TimeStruct member with its default value + * (Time = 00h:00min:00sec). + * @param RTC_TimeStruct: pointer to a RTC_TimeTypeDef structure which will be + * initialized. + * @retval None + */ +void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct) +{ + /* Time = 00h:00min:00sec */ + RTC_TimeStruct->RTC_H12 = RTC_H12_AM; + RTC_TimeStruct->RTC_Hours = 0; + RTC_TimeStruct->RTC_Minutes = 0; + RTC_TimeStruct->RTC_Seconds = 0; +} + +/** + * @brief Get the RTC current Time. + * @param RTC_Format: specifies the format of the returned parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_TimeStruct: pointer to a RTC_TimeTypeDef structure that will + * contain the returned current time configuration. + * @retval None + */ +void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + /* Get the RTC_TR register */ + tmpreg = (uint32_t)(RTC->TR & RTC_TR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + RTC_TimeStruct->RTC_Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16); + RTC_TimeStruct->RTC_Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8); + RTC_TimeStruct->RTC_Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU)); + RTC_TimeStruct->RTC_H12 = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16); + + /* Check the input parameters format */ + if (RTC_Format == RTC_Format_BIN) + { + /* Convert the structure parameters to Binary format */ + RTC_TimeStruct->RTC_Hours = (uint8_t)RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Hours); + RTC_TimeStruct->RTC_Minutes = (uint8_t)RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Minutes); + RTC_TimeStruct->RTC_Seconds = (uint8_t)RTC_Bcd2ToByte(RTC_TimeStruct->RTC_Seconds); + } +} + +/** + * @brief Gets the RTC current Calendar Subseconds value. + * @note This function freeze the Time and Date registers after reading the + * SSR register. + * @param None + * @retval RTC current Calendar Subseconds value. + */ +uint32_t RTC_GetSubSecond(void) +{ + uint32_t tmpreg = 0; + + /* Get subseconds values from the correspondent registers*/ + tmpreg = (uint32_t)(RTC->SSR); + + /* Read DR register to unfroze calendar registers */ + (void) (RTC->DR); + + return (tmpreg); +} + +/** + * @brief Set the RTC current date. + * @param RTC_Format: specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure that contains + * the date configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Date register is configured + * - ERROR: RTC Date register is not configured + */ +ErrorStatus RTC_SetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct) +{ + uint32_t tmpreg = 0; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + if ((RTC_Format == RTC_Format_BIN) && ((RTC_DateStruct->RTC_Month & 0x10) == 0x10)) + { + RTC_DateStruct->RTC_Month = (RTC_DateStruct->RTC_Month & (uint32_t)~(0x10)) + 0x0A; + } + if (RTC_Format == RTC_Format_BIN) + { + assert_param(IS_RTC_YEAR(RTC_DateStruct->RTC_Year)); + assert_param(IS_RTC_MONTH(RTC_DateStruct->RTC_Month)); + assert_param(IS_RTC_DATE(RTC_DateStruct->RTC_Date)); + } + else + { + assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(RTC_DateStruct->RTC_Year))); + tmpreg = RTC_Bcd2ToByte(RTC_DateStruct->RTC_Month); + assert_param(IS_RTC_MONTH(tmpreg)); + tmpreg = RTC_Bcd2ToByte(RTC_DateStruct->RTC_Date); + assert_param(IS_RTC_DATE(tmpreg)); + } + assert_param(IS_RTC_WEEKDAY(RTC_DateStruct->RTC_WeekDay)); + + /* Check the input parameters format */ + if (RTC_Format != RTC_Format_BIN) + { + tmpreg = ((((uint32_t)RTC_DateStruct->RTC_Year) << 16) | \ + (((uint32_t)RTC_DateStruct->RTC_Month) << 8) | \ + ((uint32_t)RTC_DateStruct->RTC_Date) | \ + (((uint32_t)RTC_DateStruct->RTC_WeekDay) << 13)); + } + else + { + tmpreg = (((uint32_t)RTC_ByteToBcd2(RTC_DateStruct->RTC_Year) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_DateStruct->RTC_Month) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_DateStruct->RTC_Date)) | \ + ((uint32_t)RTC_DateStruct->RTC_WeekDay << 13)); + } + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + /* Set the RTC_DR register */ + RTC->DR = (uint32_t)(tmpreg & RTC_DR_RESERVED_MASK); + + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + if(RTC_WaitForSynchro() == ERROR) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Fills each RTC_DateStruct member with its default value + * (Monday, January 01 xx00). + * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure which will be + * initialized. + * @retval None + */ +void RTC_DateStructInit(RTC_DateTypeDef* RTC_DateStruct) +{ + /* Monday, January 01 xx00 */ + RTC_DateStruct->RTC_WeekDay = RTC_Weekday_Monday; + RTC_DateStruct->RTC_Date = 1; + RTC_DateStruct->RTC_Month = RTC_Month_January; + RTC_DateStruct->RTC_Year = 0; +} + +/** + * @brief Get the RTC current date. + * @param RTC_Format: specifies the format of the returned parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_DateStruct: pointer to a RTC_DateTypeDef structure that will + * contain the returned current date configuration. + * @retval None + */ +void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + /* Get the RTC_TR register */ + tmpreg = (uint32_t)(RTC->DR & RTC_DR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + RTC_DateStruct->RTC_Year = (uint8_t)((tmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16); + RTC_DateStruct->RTC_Month = (uint8_t)((tmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8); + RTC_DateStruct->RTC_Date = (uint8_t)(tmpreg & (RTC_DR_DT | RTC_DR_DU)); + RTC_DateStruct->RTC_WeekDay = (uint8_t)((tmpreg & (RTC_DR_WDU)) >> 13); + + /* Check the input parameters format */ + if (RTC_Format == RTC_Format_BIN) + { + /* Convert the structure parameters to Binary format */ + RTC_DateStruct->RTC_Year = (uint8_t)RTC_Bcd2ToByte(RTC_DateStruct->RTC_Year); + RTC_DateStruct->RTC_Month = (uint8_t)RTC_Bcd2ToByte(RTC_DateStruct->RTC_Month); + RTC_DateStruct->RTC_Date = (uint8_t)RTC_Bcd2ToByte(RTC_DateStruct->RTC_Date); + } +} + +/** + * @} + */ + +/** @defgroup RTC_Group3 Alarms configuration functions + * @brief Alarms (Alarm A and Alarm B) configuration functions + * +@verbatim + =============================================================================== + Alarms (Alarm A and Alarm B) configuration functions + =============================================================================== + + This section provide functions allowing to program and read the RTC Alarms. + +@endverbatim + * @{ + */ + +/** + * @brief Set the specified RTC Alarm. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use the RTC_AlarmCmd(DISABLE)). + * @param RTC_Format: specifies the format of the returned parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_Alarm: specifies the alarm to be configured. + * This parameter can be one of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @arg RTC_Alarm_B: to select Alarm B + * @param RTC_AlarmStruct: pointer to a RTC_AlarmTypeDef structure that + * contains the alarm configuration parameters. + * @retval None + */ +void RTC_SetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + assert_param(IS_RTC_ALARM(RTC_Alarm)); + assert_param(IS_ALARM_MASK(RTC_AlarmStruct->RTC_AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(RTC_AlarmStruct->RTC_AlarmDateWeekDaySel)); + + if (RTC_Format == RTC_Format_BIN) + { + if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + assert_param(IS_RTC_HOUR12(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours)); + assert_param(IS_RTC_H12(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12)); + } + else + { + RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = 0x00; + assert_param(IS_RTC_HOUR24(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours)); + } + assert_param(IS_RTC_MINUTES(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes)); + assert_param(IS_RTC_SECONDS(RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds)); + + if(RTC_AlarmStruct->RTC_AlarmDateWeekDaySel == RTC_AlarmDateWeekDaySel_Date) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_AlarmStruct->RTC_AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_AlarmStruct->RTC_AlarmDateWeekDay)); + } + } + else + { + if ((RTC->CR & RTC_CR_FMT) != (uint32_t)RESET) + { + tmpreg = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours); + assert_param(IS_RTC_HOUR12(tmpreg)); + assert_param(IS_RTC_H12(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12)); + } + else + { + RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = 0x00; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds))); + + if(RTC_AlarmStruct->RTC_AlarmDateWeekDaySel == RTC_AlarmDateWeekDaySel_Date) + { + tmpreg = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmDateWeekDay); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg)); + } + else + { + tmpreg = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmDateWeekDay); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg)); + } + } + + /* Check the input parameters format */ + if (RTC_Format != RTC_Format_BIN) + { + tmpreg = (((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours) << 16) | \ + ((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes) << 8) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds) | \ + ((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12) << 16) | \ + ((uint32_t)(RTC_AlarmStruct->RTC_AlarmDateWeekDay) << 24) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmDateWeekDaySel) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmMask)); + } + else + { + tmpreg = (((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes) << 8) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds)) | \ + ((uint32_t)(RTC_AlarmStruct->RTC_AlarmTime.RTC_H12) << 16) | \ + ((uint32_t)RTC_ByteToBcd2(RTC_AlarmStruct->RTC_AlarmDateWeekDay) << 24) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmDateWeekDaySel) | \ + ((uint32_t)RTC_AlarmStruct->RTC_AlarmMask)); + } + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Alarm register */ + if (RTC_Alarm == RTC_Alarm_A) + { + RTC->ALRMAR = (uint32_t)tmpreg; + } + else + { + RTC->ALRMBR = (uint32_t)tmpreg; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Fills each RTC_AlarmStruct member with its default value + * (Time = 00h:00mn:00sec / Date = 1st day of the month/Mask = + * all fields are masked). + * @param RTC_AlarmStruct: pointer to a @ref RTC_AlarmTypeDef structure which + * will be initialized. + * @retval None + */ +void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct) +{ + /* Alarm Time Settings : Time = 00h:00mn:00sec */ + RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = RTC_H12_AM; + RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours = 0; + RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes = 0; + RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds = 0; + + /* Alarm Date Settings : Date = 1st day of the month */ + RTC_AlarmStruct->RTC_AlarmDateWeekDaySel = RTC_AlarmDateWeekDaySel_Date; + RTC_AlarmStruct->RTC_AlarmDateWeekDay = 1; + + /* Alarm Masks Settings : Mask = all fields are not masked */ + RTC_AlarmStruct->RTC_AlarmMask = RTC_AlarmMask_None; +} + +/** + * @brief Get the RTC Alarm value and masks. + * @param RTC_Format: specifies the format of the output parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_Alarm: specifies the alarm to be read. + * This parameter can be one of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @arg RTC_Alarm_B: to select Alarm B + * @param RTC_AlarmStruct: pointer to a RTC_AlarmTypeDef structure that will + * contains the output alarm configuration values. + * @retval None + */ +void RTC_GetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + assert_param(IS_RTC_ALARM(RTC_Alarm)); + + /* Get the RTC_ALRMxR register */ + if (RTC_Alarm == RTC_Alarm_A) + { + tmpreg = (uint32_t)(RTC->ALRMAR); + } + else + { + tmpreg = (uint32_t)(RTC->ALRMBR); + } + + /* Fill the structure with the read parameters */ + RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | \ + RTC_ALRMAR_HU)) >> 16); + RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | \ + RTC_ALRMAR_MNU)) >> 8); + RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | \ + RTC_ALRMAR_SU)); + RTC_AlarmStruct->RTC_AlarmTime.RTC_H12 = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16); + RTC_AlarmStruct->RTC_AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24); + RTC_AlarmStruct->RTC_AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL); + RTC_AlarmStruct->RTC_AlarmMask = (uint32_t)(tmpreg & RTC_AlarmMask_All); + + if (RTC_Format == RTC_Format_BIN) + { + RTC_AlarmStruct->RTC_AlarmTime.RTC_Hours = RTC_Bcd2ToByte(RTC_AlarmStruct-> \ + RTC_AlarmTime.RTC_Hours); + RTC_AlarmStruct->RTC_AlarmTime.RTC_Minutes = RTC_Bcd2ToByte(RTC_AlarmStruct-> \ + RTC_AlarmTime.RTC_Minutes); + RTC_AlarmStruct->RTC_AlarmTime.RTC_Seconds = RTC_Bcd2ToByte(RTC_AlarmStruct-> \ + RTC_AlarmTime.RTC_Seconds); + RTC_AlarmStruct->RTC_AlarmDateWeekDay = RTC_Bcd2ToByte(RTC_AlarmStruct->RTC_AlarmDateWeekDay); + } +} + +/** + * @brief Enables or disables the specified RTC Alarm. + * @param RTC_Alarm: specifies the alarm to be configured. + * This parameter can be any combination of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @arg RTC_Alarm_B: to select Alarm B + * @param NewState: new state of the specified alarm. + * This parameter can be: ENABLE or DISABLE. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Alarm is enabled/disabled + * - ERROR: RTC Alarm is not enabled/disabled + */ +ErrorStatus RTC_AlarmCmd(uint32_t RTC_Alarm, FunctionalState NewState) +{ + __IO uint32_t alarmcounter = 0x00; + uint32_t alarmstatus = 0x00; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_CMD_ALARM(RTC_Alarm)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Alarm state */ + if (NewState != DISABLE) + { + RTC->CR |= (uint32_t)RTC_Alarm; + + status = SUCCESS; + } + else + { + /* Disable the Alarm in RTC_CR register */ + RTC->CR &= (uint32_t)~RTC_Alarm; + + /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ + do + { + alarmstatus = RTC->ISR & (RTC_Alarm >> 8); + alarmcounter++; + } while((alarmcounter != INITMODE_TIMEOUT) && (alarmstatus == 0x00)); + + if ((RTC->ISR & (RTC_Alarm >> 8)) == RESET) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Configure the RTC AlarmA/B Subseconds value and mask.* + * @note This function is performed only when the Alarm is disabled. + * @param RTC_Alarm: specifies the alarm to be configured. + * This parameter can be one of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @arg RTC_Alarm_B: to select Alarm B + * @param RTC_AlarmSubSecondValue: specifies the Subseconds value. + * This parameter can be a value from 0 to 0x00007FFF. + * @param RTC_AlarmSubSecondMask: specifies the Subseconds Mask. + * This parameter can be any combination of the following values: + * @arg RTC_AlarmSubSecondMask_All : All Alarm SS fields are masked. + * There is no comparison on sub seconds for Alarm. + * @arg RTC_AlarmSubSecondMask_SS14_1 : SS[14:1] are don't care in Alarm comparison. + * Only SS[0] is compared + * @arg RTC_AlarmSubSecondMask_SS14_2 : SS[14:2] are don't care in Alarm comparison. + * Only SS[1:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_3 : SS[14:3] are don't care in Alarm comparison. + * Only SS[2:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_4 : SS[14:4] are don't care in Alarm comparison. + * Only SS[3:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_5 : SS[14:5] are don't care in Alarm comparison. + * Only SS[4:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_6 : SS[14:6] are don't care in Alarm comparison. + * Only SS[5:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_7 : SS[14:7] are don't care in Alarm comparison. + * Only SS[6:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_8 : SS[14:8] are don't care in Alarm comparison. + * Only SS[7:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_9 : SS[14:9] are don't care in Alarm comparison. + * Only SS[8:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_10: SS[14:10] are don't care in Alarm comparison. + * Only SS[9:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_11: SS[14:11] are don't care in Alarm comparison. + * Only SS[10:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_12: SS[14:12] are don't care in Alarm comparison. + * Only SS[11:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14_13: SS[14:13] are don't care in Alarm comparison. + * Only SS[12:0] are compared + * @arg RTC_AlarmSubSecondMask_SS14 : SS[14] is don't care in Alarm comparison. + * Only SS[13:0] are compared + * @arg RTC_AlarmSubSecondMask_None : SS[14:0] are compared and must match + * to activate alarm + * @retval None + */ +void RTC_AlarmSubSecondConfig(uint32_t RTC_Alarm, uint32_t RTC_AlarmSubSecondValue, uint32_t RTC_AlarmSubSecondMask) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_ALARM(RTC_Alarm)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(RTC_AlarmSubSecondValue)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(RTC_AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Alarm A or Alarm B SubSecond registers */ + tmpreg = (uint32_t) (uint32_t)(RTC_AlarmSubSecondValue) | (uint32_t)(RTC_AlarmSubSecondMask); + + if (RTC_Alarm == RTC_Alarm_A) + { + /* Configure the AlarmA SubSecond register */ + RTC->ALRMASSR = tmpreg; + } + else + { + /* Configure the Alarm B SubSecond register */ + RTC->ALRMBSSR = tmpreg; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + +} + +/** + * @brief Gets the RTC Alarm Subseconds value. + * @param RTC_Alarm: specifies the alarm to be read. + * This parameter can be one of the following values: + * @arg RTC_Alarm_A: to select Alarm A + * @arg RTC_Alarm_B: to select Alarm B + * @param None + * @retval RTC Alarm Subseconds value. + */ +uint32_t RTC_GetAlarmSubSecond(uint32_t RTC_Alarm) +{ + uint32_t tmpreg = 0; + + /* Get the RTC_ALRMxR register */ + if (RTC_Alarm == RTC_Alarm_A) + { + tmpreg = (uint32_t)((RTC->ALRMASSR) & RTC_ALRMASSR_SS); + } + else + { + tmpreg = (uint32_t)((RTC->ALRMBSSR) & RTC_ALRMBSSR_SS); + } + + return (tmpreg); +} + +/** + * @} + */ + +/** @defgroup RTC_Group4 WakeUp Timer configuration functions + * @brief WakeUp Timer configuration functions + * +@verbatim + =============================================================================== + WakeUp Timer configuration functions + =============================================================================== + + This section provide functions allowing to program and read the RTC WakeUp. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the RTC Wakeup clock source. + * @note The WakeUp Clock source can only be changed when the RTC WakeUp + * is disabled (Use the RTC_WakeUpCmd(DISABLE)). + * @param RTC_WakeUpClock: Wakeup Clock source. + * This parameter can be one of the following values: + * @arg RTC_WakeUpClock_RTCCLK_Div16: RTC Wakeup Counter Clock = RTCCLK/16 + * @arg RTC_WakeUpClock_RTCCLK_Div8: RTC Wakeup Counter Clock = RTCCLK/8 + * @arg RTC_WakeUpClock_RTCCLK_Div4: RTC Wakeup Counter Clock = RTCCLK/4 + * @arg RTC_WakeUpClock_RTCCLK_Div2: RTC Wakeup Counter Clock = RTCCLK/2 + * @arg RTC_WakeUpClock_CK_SPRE_16bits: RTC Wakeup Counter Clock = CK_SPRE + * @arg RTC_WakeUpClock_CK_SPRE_17bits: RTC Wakeup Counter Clock = CK_SPRE + * @retval None + */ +void RTC_WakeUpClockConfig(uint32_t RTC_WakeUpClock) +{ + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(RTC_WakeUpClock)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Clear the Wakeup Timer clock source bits in CR register */ + RTC->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + RTC->CR |= (uint32_t)RTC_WakeUpClock; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Configures the RTC Wakeup counter. + * @note The RTC WakeUp counter can only be written when the RTC WakeUp + * is disabled (Use the RTC_WakeUpCmd(DISABLE)). + * @param RTC_WakeUpCounter: specifies the WakeUp counter. + * This parameter can be a value from 0x0000 to 0xFFFF. + * @retval None + */ +void RTC_SetWakeUpCounter(uint32_t RTC_WakeUpCounter) +{ + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_COUNTER(RTC_WakeUpCounter)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Wakeup Timer counter */ + RTC->WUTR = (uint32_t)RTC_WakeUpCounter; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Returns the RTC WakeUp timer counter value. + * @param None + * @retval The RTC WakeUp Counter value. + */ +uint32_t RTC_GetWakeUpCounter(void) +{ + /* Get the counter value */ + return ((uint32_t)(RTC->WUTR & RTC_WUTR_WUT)); +} + +/** + * @brief Enables or Disables the RTC WakeUp timer. + * @param NewState: new state of the WakeUp timer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +ErrorStatus RTC_WakeUpCmd(FunctionalState NewState) +{ + __IO uint32_t wutcounter = 0x00; + uint32_t wutwfstatus = 0x00; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + if (NewState != DISABLE) + { + /* Enable the Wakeup Timer */ + RTC->CR |= (uint32_t)RTC_CR_WUTE; + status = SUCCESS; + } + else + { + /* Disable the Wakeup Timer */ + RTC->CR &= (uint32_t)~RTC_CR_WUTE; + /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ + do + { + wutwfstatus = RTC->ISR & RTC_ISR_WUTWF; + wutcounter++; + } while((wutcounter != INITMODE_TIMEOUT) && (wutwfstatus == 0x00)); + + if ((RTC->ISR & RTC_ISR_WUTWF) == RESET) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @} + */ + +/** @defgroup RTC_Group5 Daylight Saving configuration functions + * @brief Daylight Saving configuration functions + * +@verbatim + =============================================================================== + Daylight Saving configuration functions + =============================================================================== + + This section provide functions allowing to configure the RTC DayLight Saving. + +@endverbatim + * @{ + */ + +/** + * @brief Adds or substract one hour from the current time. + * @param RTC_DayLightSaveOperation: the value of hour adjustment. + * This parameter can be one of the following values: + * @arg RTC_DayLightSaving_SUB1H: Substract one hour (winter time) + * @arg RTC_DayLightSaving_ADD1H: Add one hour (summer time) + * @param RTC_StoreOperation: Specifies the value to be written in the BCK bit + * in CR register to store the operation. + * This parameter can be one of the following values: + * @arg RTC_StoreOperation_Reset: BCK Bit Reset + * @arg RTC_StoreOperation_Set: BCK Bit Set + * @retval None + */ +void RTC_DayLightSavingConfig(uint32_t RTC_DayLightSaving, uint32_t RTC_StoreOperation) +{ + /* Check the parameters */ + assert_param(IS_RTC_DAYLIGHT_SAVING(RTC_DayLightSaving)); + assert_param(IS_RTC_STORE_OPERATION(RTC_StoreOperation)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Clear the bits to be configured */ + RTC->CR &= (uint32_t)~(RTC_CR_BCK); + + /* Configure the RTC_CR register */ + RTC->CR |= (uint32_t)(RTC_DayLightSaving | RTC_StoreOperation); + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Returns the RTC Day Light Saving stored operation. + * @param None + * @retval RTC Day Light Saving stored operation. + * - RTC_StoreOperation_Reset + * - RTC_StoreOperation_Set + */ +uint32_t RTC_GetStoreOperation(void) +{ + return (RTC->CR & RTC_CR_BCK); +} + +/** + * @} + */ + +/** @defgroup RTC_Group6 Output pin Configuration function + * @brief Output pin Configuration function + * +@verbatim + =============================================================================== + Output pin Configuration function + =============================================================================== + + This section provide functions allowing to configure the RTC Output source. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the RTC output source (AFO_ALARM). + * @param RTC_Output: Specifies which signal will be routed to the RTC output. + * This parameter can be one of the following values: + * @arg RTC_Output_Disable: No output selected + * @arg RTC_Output_AlarmA: signal of AlarmA mapped to output + * @arg RTC_Output_AlarmB: signal of AlarmB mapped to output + * @arg RTC_Output_WakeUp: signal of WakeUp mapped to output + * @param RTC_OutputPolarity: Specifies the polarity of the output signal. + * This parameter can be one of the following: + * @arg RTC_OutputPolarity_High: The output pin is high when the + * ALRAF/ALRBF/WUTF is high (depending on OSEL) + * @arg RTC_OutputPolarity_Low: The output pin is low when the + * ALRAF/ALRBF/WUTF is high (depending on OSEL) + * @retval None + */ +void RTC_OutputConfig(uint32_t RTC_Output, uint32_t RTC_OutputPolarity) +{ + /* Check the parameters */ + assert_param(IS_RTC_OUTPUT(RTC_Output)); + assert_param(IS_RTC_OUTPUT_POL(RTC_OutputPolarity)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Clear the bits to be configured */ + RTC->CR &= (uint32_t)~(RTC_CR_OSEL | RTC_CR_POL); + + /* Configure the output selection and polarity */ + RTC->CR |= (uint32_t)(RTC_Output | RTC_OutputPolarity); + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @} + */ + +/** @defgroup RTC_Group7 Digital Calibration configuration functions + * @brief Coarse Calibration configuration functions + * +@verbatim + =============================================================================== + Digital Calibration configuration functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the Coarse calibration parameters. + * @param RTC_CalibSign: specifies the sign of the coarse calibration value. + * This parameter can be one of the following values: + * @arg RTC_CalibSign_Positive: The value sign is positive + * @arg RTC_CalibSign_Negative: The value sign is negative + * @param Value: value of coarse calibration expressed in ppm (coded on 5 bits). + * + * @note This Calibration value should be between 0 and 63 when using negative + * sign with a 2-ppm step. + * + * @note This Calibration value should be between 0 and 126 when using positive + * sign with a 4-ppm step. + * + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Coarse calibration are initialized + * - ERROR: RTC Coarse calibration are not initialized + */ +ErrorStatus RTC_CoarseCalibConfig(uint32_t RTC_CalibSign, uint32_t Value) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_CALIB_SIGN(RTC_CalibSign)); + assert_param(IS_RTC_CALIB_VALUE(Value)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + /* Set the coarse calibration value */ + RTC->CALIBR = (uint32_t)(RTC_CalibSign | Value); + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + status = SUCCESS; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Enables or disables the Coarse calibration process. + * @param NewState: new state of the Coarse calibration. + * This parameter can be: ENABLE or DISABLE. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Coarse calibration are enabled/disabled + * - ERROR: RTC Coarse calibration are not enabled/disabled + */ +ErrorStatus RTC_CoarseCalibCmd(FunctionalState NewState) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Set Initialization mode */ + if (RTC_EnterInitMode() == ERROR) + { + status = ERROR; + } + else + { + if (NewState != DISABLE) + { + /* Enable the Coarse Calibration */ + RTC->CR |= (uint32_t)RTC_CR_DCE; + } + else + { + /* Disable the Coarse Calibration */ + RTC->CR &= (uint32_t)~RTC_CR_DCE; + } + /* Exit Initialization mode */ + RTC_ExitInitMode(); + + status = SUCCESS; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return status; +} + +/** + * @brief Enables or disables the RTC clock to be output through the relative pin. + * @param NewState: new state of the digital calibration Output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_CalibOutputCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + if (NewState != DISABLE) + { + /* Enable the RTC clock output */ + RTC->CR |= (uint32_t)RTC_CR_COE; + } + else + { + /* Disable the RTC clock output */ + RTC->CR &= (uint32_t)~RTC_CR_COE; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param RTC_CalibOutput : Select the Calibration output Selection . + * This parameter can be one of the following values: + * @arg RTC_CalibOutput_512Hz: A signal has a regular waveform at 512Hz. + * @arg RTC_CalibOutput_1Hz : A signal has a regular waveform at 1Hz. + * @retval None +*/ +void RTC_CalibOutputConfig(uint32_t RTC_CalibOutput) +{ + /* Check the parameters */ + assert_param(IS_RTC_CALIB_OUTPUT(RTC_CalibOutput)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /*clear flags before config*/ + RTC->CR &= (uint32_t)~(RTC_CR_COSEL); + + /* Configure the RTC_CR register */ + RTC->CR |= (uint32_t)RTC_CalibOutput; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Configures the Smooth Calibration Settings. + * @param RTC_SmoothCalibPeriod : Select the Smooth Calibration Period. + * This parameter can be can be one of the following values: + * @arg RTC_SmoothCalibPeriod_32sec : The smooth calibration periode is 32s. + * @arg RTC_SmoothCalibPeriod_16sec : The smooth calibration periode is 16s. + * @arg RTC_SmoothCalibPeriod_8sec : The smooth calibartion periode is 8s. + * @param RTC_SmoothCalibPlusPulses : Select to Set or reset the CALP bit. + * This parameter can be one of the following values: + * @arg RTC_SmoothCalibPlusPulses_Set : Add one RTCCLK puls every 2**11 pulses. + * @arg RTC_SmoothCalibPlusPulses_Reset: No RTCCLK pulses are added. + * @param RTC_SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits. + * This parameter can be one any value from 0 to 0x000001FF. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Calib registers are configured + * - ERROR: RTC Calib registers are not configured +*/ +ErrorStatus RTC_SmoothCalibConfig(uint32_t RTC_SmoothCalibPeriod, + uint32_t RTC_SmoothCalibPlusPulses, + uint32_t RTC_SmouthCalibMinusPulsesValue) +{ + ErrorStatus status = ERROR; + uint32_t recalpfcount = 0; + + /* Check the parameters */ + assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(RTC_SmoothCalibPeriod)); + assert_param(IS_RTC_SMOOTH_CALIB_PLUS(RTC_SmoothCalibPlusPulses)); + assert_param(IS_RTC_SMOOTH_CALIB_MINUS(RTC_SmouthCalibMinusPulsesValue)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* check if a calibration is pending*/ + if ((RTC->ISR & RTC_ISR_RECALPF) != RESET) + { + /* wait until the Calibration is completed*/ + while (((RTC->ISR & RTC_ISR_RECALPF) != RESET) && (recalpfcount != RECALPF_TIMEOUT)) + { + recalpfcount++; + } + } + + /* check if the calibration pending is completed or if there is no calibration operation at all*/ + if ((RTC->ISR & RTC_ISR_RECALPF) == RESET) + { + /* Configure the Smooth calibration settings */ + RTC->CALR = (uint32_t)((uint32_t)RTC_SmoothCalibPeriod | (uint32_t)RTC_SmoothCalibPlusPulses | (uint32_t)RTC_SmouthCalibMinusPulsesValue); + + status = SUCCESS; + } + else + { + status = ERROR; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return (ErrorStatus)(status); +} + +/** + * @} + */ + + +/** @defgroup RTC_Group8 TimeStamp configuration functions + * @brief TimeStamp configuration functions + * +@verbatim + =============================================================================== + TimeStamp configuration functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or Disables the RTC TimeStamp functionality with the + * specified time stamp pin stimulating edge. + * @param RTC_TimeStampEdge: Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following: + * @arg RTC_TimeStampEdge_Rising: the Time stamp event occurs on the rising + * edge of the related pin. + * @arg RTC_TimeStampEdge_Falling: the Time stamp event occurs on the + * falling edge of the related pin. + * @param NewState: new state of the TimeStamp. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_TimeStampCmd(uint32_t RTC_TimeStampEdge, FunctionalState NewState) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_TIMESTAMP_EDGE(RTC_TimeStampEdge)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(RTC->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + /* Get the new configuration */ + if (NewState != DISABLE) + { + tmpreg |= (uint32_t)(RTC_TimeStampEdge | RTC_CR_TSE); + } + else + { + tmpreg |= (uint32_t)(RTC_TimeStampEdge); + } + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Configure the Time Stamp TSEDGE and Enable bits */ + RTC->CR = (uint32_t)tmpreg; + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Get the RTC TimeStamp value and masks. + * @param RTC_Format: specifies the format of the output parameters. + * This parameter can be one of the following values: + * @arg RTC_Format_BIN: Binary data format + * @arg RTC_Format_BCD: BCD data format + * @param RTC_StampTimeStruct: pointer to a RTC_TimeTypeDef structure that will + * contains the TimeStamp time values. + * @param RTC_StampDateStruct: pointer to a RTC_DateTypeDef structure that will + * contains the TimeStamp date values. + * @retval None + */ +void RTC_GetTimeStamp(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_StampTimeStruct, + RTC_DateTypeDef* RTC_StampDateStruct) +{ + uint32_t tmptime = 0, tmpdate = 0; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(RTC_Format)); + + /* Get the TimeStamp time and date registers values */ + tmptime = (uint32_t)(RTC->TSTR & RTC_TR_RESERVED_MASK); + tmpdate = (uint32_t)(RTC->TSDR & RTC_DR_RESERVED_MASK); + + /* Fill the Time structure fields with the read parameters */ + RTC_StampTimeStruct->RTC_Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16); + RTC_StampTimeStruct->RTC_Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8); + RTC_StampTimeStruct->RTC_Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU)); + RTC_StampTimeStruct->RTC_H12 = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16); + + /* Fill the Date structure fields with the read parameters */ + RTC_StampDateStruct->RTC_Year = 0; + RTC_StampDateStruct->RTC_Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8); + RTC_StampDateStruct->RTC_Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU)); + RTC_StampDateStruct->RTC_WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13); + + /* Check the input parameters format */ + if (RTC_Format == RTC_Format_BIN) + { + /* Convert the Time structure parameters to Binary format */ + RTC_StampTimeStruct->RTC_Hours = (uint8_t)RTC_Bcd2ToByte(RTC_StampTimeStruct->RTC_Hours); + RTC_StampTimeStruct->RTC_Minutes = (uint8_t)RTC_Bcd2ToByte(RTC_StampTimeStruct->RTC_Minutes); + RTC_StampTimeStruct->RTC_Seconds = (uint8_t)RTC_Bcd2ToByte(RTC_StampTimeStruct->RTC_Seconds); + + /* Convert the Date structure parameters to Binary format */ + RTC_StampDateStruct->RTC_Month = (uint8_t)RTC_Bcd2ToByte(RTC_StampDateStruct->RTC_Month); + RTC_StampDateStruct->RTC_Date = (uint8_t)RTC_Bcd2ToByte(RTC_StampDateStruct->RTC_Date); + RTC_StampDateStruct->RTC_WeekDay = (uint8_t)RTC_Bcd2ToByte(RTC_StampDateStruct->RTC_WeekDay); + } +} + +/** + * @brief Get the RTC timestamp Subseconds value. + * @param None + * @retval RTC current timestamp Subseconds value. + */ +uint32_t RTC_GetTimeStampSubSecond(void) +{ + /* Get timestamp subseconds values from the correspondent registers */ + return (uint32_t)(RTC->TSSSR); +} + +/** + * @} + */ + +/** @defgroup RTC_Group9 Tampers configuration functions + * @brief Tampers configuration functions + * +@verbatim + =============================================================================== + Tampers configuration functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the select Tamper pin edge. + * @param RTC_Tamper: Selected tamper pin. + * This parameter can be RTC_Tamper_1. + * @param RTC_TamperTrigger: Specifies the trigger on the tamper pin that + * stimulates tamper event. + * This parameter can be one of the following values: + * @arg RTC_TamperTrigger_RisingEdge: Rising Edge of the tamper pin causes tamper event. + * @arg RTC_TamperTrigger_FallingEdge: Falling Edge of the tamper pin causes tamper event. + * @arg RTC_TamperTrigger_LowLevel: Low Level of the tamper pin causes tamper event. + * @arg RTC_TamperTrigger_HighLevel: High Level of the tamper pin causes tamper event. + * @retval None + */ +void RTC_TamperTriggerConfig(uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(RTC_Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(RTC_TamperTrigger)); + + if (RTC_TamperTrigger == RTC_TamperTrigger_RisingEdge) + { + /* Configure the RTC_TAFCR register */ + RTC->TAFCR &= (uint32_t)((uint32_t)~(RTC_Tamper << 1)); + } + else + { + /* Configure the RTC_TAFCR register */ + RTC->TAFCR |= (uint32_t)(RTC_Tamper << 1); + } +} + +/** + * @brief Enables or Disables the Tamper detection. + * @param RTC_Tamper: Selected tamper pin. + * This parameter can be RTC_Tamper_1. + * @param NewState: new state of the tamper pin. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_TamperCmd(uint32_t RTC_Tamper, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(RTC_Tamper)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected Tamper pin */ + RTC->TAFCR |= (uint32_t)RTC_Tamper; + } + else + { + /* Disable the selected Tamper pin */ + RTC->TAFCR &= (uint32_t)~RTC_Tamper; + } +} + +/** + * @brief Configures the Tampers Filter. + * @param RTC_TamperFilter: Specifies the tampers filter. + * This parameter can be one of the following values: + * @arg RTC_TamperFilter_Disable: Tamper filter is disabled. + * @arg RTC_TamperFilter_2Sample: Tamper is activated after 2 consecutive + * samples at the active level + * @arg RTC_TamperFilter_4Sample: Tamper is activated after 4 consecutive + * samples at the active level + * @arg RTC_TamperFilter_8Sample: Tamper is activated after 8 consecutive + * samples at the active level + * @retval None + */ +void RTC_TamperFilterConfig(uint32_t RTC_TamperFilter) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER_FILTER(RTC_TamperFilter)); + + /* Clear TAMPFLT[1:0] bits in the RTC_TAFCR register */ + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPFLT); + + /* Configure the RTC_TAFCR register */ + RTC->TAFCR |= (uint32_t)RTC_TamperFilter; +} + +/** + * @brief Configures the Tampers Sampling Frequency. + * @param RTC_TamperSamplingFreq: Specifies the tampers Sampling Frequency. + * This parameter can be one of the following values: + * @arg RTC_TamperSamplingFreq_RTCCLK_Div32768: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 32768 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div16384: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 16384 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div8192: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 8192 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div4096: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 4096 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div2048: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 2048 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div1024: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 1024 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div512: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 512 + * @arg RTC_TamperSamplingFreq_RTCCLK_Div256: Each of the tamper inputs are sampled + * with a frequency = RTCCLK / 256 + * @retval None + */ +void RTC_TamperSamplingFreqConfig(uint32_t RTC_TamperSamplingFreq) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(RTC_TamperSamplingFreq)); + + /* Clear TAMPFREQ[2:0] bits in the RTC_TAFCR register */ + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPFREQ); + + /* Configure the RTC_TAFCR register */ + RTC->TAFCR |= (uint32_t)RTC_TamperSamplingFreq; +} + +/** + * @brief Configures the Tampers Pins input Precharge Duration. + * @param RTC_TamperPrechargeDuration: Specifies the Tampers Pins input + * Precharge Duration. + * This parameter can be one of the following values: + * @arg RTC_TamperPrechargeDuration_1RTCCLK: Tamper pins are pre-charged before sampling during 1 RTCCLK cycle + * @arg RTC_TamperPrechargeDuration_2RTCCLK: Tamper pins are pre-charged before sampling during 2 RTCCLK cycle + * @arg RTC_TamperPrechargeDuration_4RTCCLK: Tamper pins are pre-charged before sampling during 4 RTCCLK cycle + * @arg RTC_TamperPrechargeDuration_8RTCCLK: Tamper pins are pre-charged before sampling during 8 RTCCLK cycle + * @retval None + */ +void RTC_TamperPinsPrechargeDuration(uint32_t RTC_TamperPrechargeDuration) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(RTC_TamperPrechargeDuration)); + + /* Clear TAMPPRCH[1:0] bits in the RTC_TAFCR register */ + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPPRCH); + + /* Configure the RTC_TAFCR register */ + RTC->TAFCR |= (uint32_t)RTC_TamperPrechargeDuration; +} + +/** + * @brief Enables or Disables the TimeStamp on Tamper Detection Event. + * @note The timestamp is valid even the TSE bit in tamper control register + * is reset. + * @param NewState: new state of the timestamp on tamper event. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_TimeStampOnTamperDetectionCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Save timestamp on tamper detection event */ + RTC->TAFCR |= (uint32_t)RTC_TAFCR_TAMPTS; + } + else + { + /* Tamper detection does not cause a timestamp to be saved */ + RTC->TAFCR &= (uint32_t)~RTC_TAFCR_TAMPTS; + } +} + +/** + * @brief Enables or Disables the Precharge of Tamper pin. + * @param NewState: new state of tamper pull up. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_TamperPullUpCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable precharge of the selected Tamper pin */ + RTC->TAFCR &= (uint32_t)~RTC_TAFCR_TAMPPUDIS; + } + else + { + /* Disable precharge of the selected Tamper pin */ + RTC->TAFCR |= (uint32_t)RTC_TAFCR_TAMPPUDIS; + } +} + +/** + * @} + */ + +/** @defgroup RTC_Group10 Backup Data Registers configuration functions + * @brief Backup Data Registers configuration functions + * +@verbatim + =============================================================================== + Backup Data Registers configuration functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Writes a data in a specified RTC Backup data register. + * @param RTC_BKP_DR: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to + * specify the register. + * @param Data: Data to be written in the specified RTC Backup data register. + * @retval None + */ +void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_RTC_BKP(RTC_BKP_DR)); + + tmp = RTC_BASE + 0x50; + tmp += (RTC_BKP_DR * 4); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @param RTC_BKP_DR: RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to + * specify the register. + * @retval None + */ +uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_RTC_BKP(RTC_BKP_DR)); + + tmp = RTC_BASE + 0x50; + tmp += (RTC_BKP_DR * 4); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + +/** + * @} + */ + +/** @defgroup RTC_Group11 RTC Tamper and TimeStamp Pins Selection and Output Type Config configuration functions + * @brief RTC Tamper and TimeStamp Pins Selection and Output Type Config + * configuration functions + * +@verbatim + =============================================================================== + RTC Tamper and TimeStamp Pins Selection and Output Type Config configuration + functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Selects the RTC Tamper Pin. + * @param RTC_TamperPin: specifies the RTC Tamper Pin. + * This parameter can be one of the following values: + * @arg RTC_TamperPin_PC13: PC13 is selected as RTC Tamper Pin. + * @arg RTC_TamperPin_PI8: PI8 is selected as RTC Tamper Pin. + * @retval None + */ +void RTC_TamperPinSelection(uint32_t RTC_TamperPin) +{ + /* Check the parameters */ + assert_param(IS_RTC_TAMPER_PIN(RTC_TamperPin)); + + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TAMPINSEL); + RTC->TAFCR |= (uint32_t)(RTC_TamperPin); +} + +/** + * @brief Selects the RTC TimeStamp Pin. + * @param RTC_TimeStampPin: specifies the RTC TimeStamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TimeStampPin_PC13: PC13 is selected as RTC TimeStamp Pin. + * @arg RTC_TimeStampPin_PI8: PI8 is selected as RTC TimeStamp Pin. + * @retval None + */ +void RTC_TimeStampPinSelection(uint32_t RTC_TimeStampPin) +{ + /* Check the parameters */ + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_TSINSEL); + RTC->TAFCR |= (uint32_t)(RTC_TimeStampPin); +} + +/** + * @brief Configures the RTC Output Pin mode. + * @param RTC_OutputType: specifies the RTC Output (PC13) pin mode. + * This parameter can be one of the following values: + * @arg RTC_OutputType_OpenDrain: RTC Output (PC13) is configured in + * Open Drain mode. + * @arg RTC_OutputType_PushPull: RTC Output (PC13) is configured in + * Push Pull mode. + * @retval None + */ +void RTC_OutputTypeConfig(uint32_t RTC_OutputType) +{ + /* Check the parameters */ + assert_param(IS_RTC_OUTPUT_TYPE(RTC_OutputType)); + + RTC->TAFCR &= (uint32_t)~(RTC_TAFCR_ALARMOUTTYPE); + RTC->TAFCR |= (uint32_t)(RTC_OutputType); +} + +/** + * @} + */ + +/** @defgroup RTC_Group12 Shift control synchronisation functions + * @brief Shift control synchronisation functions + * +@verbatim + =============================================================================== + Shift control synchronisation functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the Synchronization Shift Control Settings. + * @note When REFCKON is set, firmware must not write to Shift control register + * @param RTC_ShiftAdd1S : Select to add or not 1 second to the time Calendar. + * This parameter can be one of the following values : + * @arg RTC_ShiftAdd1S_Set : Add one second to the clock calendar. + * @arg RTC_ShiftAdd1S_Reset: No effect. + * @param RTC_ShiftSubFS: Select the number of Second Fractions to Substitute. + * This parameter can be one any value from 0 to 0x7FFF. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Shift registers are configured + * - ERROR: RTC Shift registers are not configured +*/ +ErrorStatus RTC_SynchroShiftConfig(uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS) +{ + ErrorStatus status = ERROR; + uint32_t shpfcount = 0; + + /* Check the parameters */ + assert_param(IS_RTC_SHIFT_ADD1S(RTC_ShiftAdd1S)); + assert_param(IS_RTC_SHIFT_SUBFS(RTC_ShiftSubFS)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + /* Check if a Shift is pending*/ + if ((RTC->ISR & RTC_ISR_SHPF) != RESET) + { + /* Wait until the shift is completed*/ + while (((RTC->ISR & RTC_ISR_SHPF) != RESET) && (shpfcount != SHPF_TIMEOUT)) + { + shpfcount++; + } + } + + /* Check if the Shift pending is completed or if there is no Shift operation at all*/ + if ((RTC->ISR & RTC_ISR_SHPF) == RESET) + { + /* check if the reference clock detection is disabled */ + if((RTC->CR & RTC_CR_REFCKON) == RESET) + { + /* Configure the Shift settings */ + RTC->SHIFTR = (uint32_t)(uint32_t)(RTC_ShiftSubFS) | (uint32_t)(RTC_ShiftAdd1S); + + if(RTC_WaitForSynchro() == ERROR) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + else + { + status = ERROR; + } + } + else + { + status = ERROR; + } + + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; + + return (ErrorStatus)(status); +} + +/** + * @} + */ + +/** @defgroup RTC_Group13 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + All RTC interrupts are connected to the EXTI controller. + + - To enable the RTC Alarm interrupt, the following sequence is required: + - Configure and enable the EXTI Line 17 in interrupt mode and select the rising + edge sensitivity using the EXTI_Init() function. + - Configure and enable the RTC_Alarm IRQ channel in the NVIC using the NVIC_Init() + function. + - Configure the RTC to generate RTC alarms (Alarm A and/or Alarm B) using + the RTC_SetAlarm() and RTC_AlarmCmd() functions. + + - To enable the RTC Wakeup interrupt, the following sequence is required: + - Configure and enable the EXTI Line 22 in interrupt mode and select the rising + edge sensitivity using the EXTI_Init() function. + - Configure and enable the RTC_WKUP IRQ channel in the NVIC using the NVIC_Init() + function. + - Configure the RTC to generate the RTC wakeup timer event using the + RTC_WakeUpClockConfig(), RTC_SetWakeUpCounter() and RTC_WakeUpCmd() functions. + + - To enable the RTC Tamper interrupt, the following sequence is required: + - Configure and enable the EXTI Line 21 in interrupt mode and select the rising + edge sensitivity using the EXTI_Init() function. + - Configure and enable the TAMP_STAMP IRQ channel in the NVIC using the NVIC_Init() + function. + - Configure the RTC to detect the RTC tamper event using the + RTC_TamperTriggerConfig() and RTC_TamperCmd() functions. + + - To enable the RTC TimeStamp interrupt, the following sequence is required: + - Configure and enable the EXTI Line 21 in interrupt mode and select the rising + edge sensitivity using the EXTI_Init() function. + - Configure and enable the TAMP_STAMP IRQ channel in the NVIC using the NVIC_Init() + function. + - Configure the RTC to detect the RTC time-stamp event using the + RTC_TimeStampCmd() functions. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified RTC interrupts. + * @param RTC_IT: specifies the RTC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TS: Time Stamp interrupt mask + * @arg RTC_IT_WUT: WakeUp Timer interrupt mask + * @arg RTC_IT_ALRB: Alarm B interrupt mask + * @arg RTC_IT_ALRA: Alarm A interrupt mask + * @arg RTC_IT_TAMP: Tamper event interrupt mask + * @param NewState: new state of the specified RTC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_ITConfig(uint32_t RTC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RTC_CONFIG_IT(RTC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* Disable the write protection for RTC registers */ + RTC->WPR = 0xCA; + RTC->WPR = 0x53; + + if (NewState != DISABLE) + { + /* Configure the Interrupts in the RTC_CR register */ + RTC->CR |= (uint32_t)(RTC_IT & ~RTC_TAFCR_TAMPIE); + /* Configure the Tamper Interrupt in the RTC_TAFCR */ + RTC->TAFCR |= (uint32_t)(RTC_IT & RTC_TAFCR_TAMPIE); + } + else + { + /* Configure the Interrupts in the RTC_CR register */ + RTC->CR &= (uint32_t)~(RTC_IT & (uint32_t)~RTC_TAFCR_TAMPIE); + /* Configure the Tamper Interrupt in the RTC_TAFCR */ + RTC->TAFCR &= (uint32_t)~(RTC_IT & RTC_TAFCR_TAMPIE); + } + /* Enable the write protection for RTC registers */ + RTC->WPR = 0xFF; +} + +/** + * @brief Checks whether the specified RTC flag is set or not. + * @param RTC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg RTC_FLAG_TAMP1F: Tamper 1 event flag + * @arg RTC_FLAG_TSOVF: Time Stamp OverFlow flag + * @arg RTC_FLAG_TSF: Time Stamp event flag + * @arg RTC_FLAG_WUTF: WakeUp Timer flag + * @arg RTC_FLAG_ALRBF: Alarm B flag + * @arg RTC_FLAG_ALRAF: Alarm A flag + * @arg RTC_FLAG_INITF: Initialization mode flag + * @arg RTC_FLAG_RSF: Registers Synchronized flag + * @arg RTC_FLAG_INITS: Registers Configured flag + * @arg RTC_FLAG_WUTWF: WakeUp Timer Write flag + * @arg RTC_FLAG_ALRBWF: Alarm B Write flag + * @arg RTC_FLAG_ALRAWF: Alarm A write flag + * @retval The new state of RTC_FLAG (SET or RESET). + */ +FlagStatus RTC_GetFlagStatus(uint32_t RTC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); + + /* Get all the flags */ + tmpreg = (uint32_t)(RTC->ISR & RTC_FLAGS_MASK); + + /* Return the status of the flag */ + if ((tmpreg & RTC_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's pending flags. + * @param RTC_FLAG: specifies the RTC flag to clear. + * This parameter can be any combination of the following values: + * @arg RTC_FLAG_TAMP1F: Tamper 1 event flag + * @arg RTC_FLAG_TSOVF: Time Stamp Overflow flag + * @arg RTC_FLAG_TSF: Time Stamp event flag + * @arg RTC_FLAG_WUTF: WakeUp Timer flag + * @arg RTC_FLAG_ALRBF: Alarm B flag + * @arg RTC_FLAG_ALRAF: Alarm A flag + * @arg RTC_FLAG_RSF: Registers Synchronized flag + * @retval None + */ +void RTC_ClearFlag(uint32_t RTC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); + + /* Clear the Flags in the RTC_ISR register */ + RTC->ISR = (uint32_t)((uint32_t)(~((RTC_FLAG | RTC_ISR_INIT)& 0x0000FFFF) | (uint32_t)(RTC->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Checks whether the specified RTC interrupt has occurred or not. + * @param RTC_IT: specifies the RTC interrupt source to check. + * This parameter can be one of the following values: + * @arg RTC_IT_TS: Time Stamp interrupt + * @arg RTC_IT_WUT: WakeUp Timer interrupt + * @arg RTC_IT_ALRB: Alarm B interrupt + * @arg RTC_IT_ALRA: Alarm A interrupt + * @arg RTC_IT_TAMP1: Tamper 1 event interrupt + * @retval The new state of RTC_IT (SET or RESET). + */ +ITStatus RTC_GetITStatus(uint32_t RTC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpreg = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_RTC_GET_IT(RTC_IT)); + + /* Get the TAMPER Interrupt enable bit and pending bit */ + tmpreg = (uint32_t)(RTC->TAFCR & (RTC_TAFCR_TAMPIE)); + + /* Get the Interrupt enable Status */ + enablestatus = (uint32_t)((RTC->CR & RTC_IT) | (tmpreg & (RTC_IT >> 15))); + + /* Get the Interrupt pending bit */ + tmpreg = (uint32_t)((RTC->ISR & (uint32_t)(RTC_IT >> 4))); + + /* Get the status of the Interrupt */ + if ((enablestatus != (uint32_t)RESET) && ((tmpreg & 0x0000FFFF) != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's interrupt pending bits. + * @param RTC_IT: specifies the RTC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TS: Time Stamp interrupt + * @arg RTC_IT_WUT: WakeUp Timer interrupt + * @arg RTC_IT_ALRB: Alarm B interrupt + * @arg RTC_IT_ALRA: Alarm A interrupt + * @arg RTC_IT_TAMP1: Tamper 1 event interrupt + * @retval None + */ +void RTC_ClearITPendingBit(uint32_t RTC_IT) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RTC_CLEAR_IT(RTC_IT)); + + /* Get the RTC_ISR Interrupt pending bits mask */ + tmpreg = (uint32_t)(RTC_IT >> 4); + + /* Clear the interrupt pending bits in the RTC_ISR register */ + RTC->ISR = (uint32_t)((uint32_t)(~((tmpreg | RTC_ISR_INIT)& 0x0000FFFF) | (uint32_t)(RTC->ISR & RTC_ISR_INIT))); +} + +/** + * @} + */ + +/** + * @brief Converts a 2 digit decimal to BCD format. + * @param Value: Byte to be converted. + * @retval Converted byte + */ +static uint8_t RTC_ByteToBcd2(uint8_t Value) +{ + uint8_t bcdhigh = 0; + + while (Value >= 10) + { + bcdhigh++; + Value -= 10; + } + + return ((uint8_t)(bcdhigh << 4) | Value); +} + +/** + * @brief Convert from 2 digit BCD to Binary. + * @param Value: BCD value to be converted. + * @retval Converted word + */ +static uint8_t RTC_Bcd2ToByte(uint8_t Value) +{ + uint8_t tmp = 0; + tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10; + return (tmp + (Value & (uint8_t)0x0F)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.h new file mode 100644 index 00000000000..94ffb658164 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_rtc.h @@ -0,0 +1,875 @@ +/** + ****************************************************************************** + * @file stm32f4xx_rtc.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the RTC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_RTC_H +#define __STM32F4xx_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t RTC_HourFormat; /*!< Specifies the RTC Hour Format. + This parameter can be a value of @ref RTC_Hour_Formats */ + + uint32_t RTC_AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be set to a value lower than 0x7F */ + + uint32_t RTC_SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be set to a value lower than 0x7FFF */ +}RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t RTC_Hours; /*!< Specifies the RTC Time Hour. + This parameter must be set to a value in the 0-12 range + if the RTC_HourFormat_12 is selected or 0-23 range if + the RTC_HourFormat_24 is selected. */ + + uint8_t RTC_Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be set to a value in the 0-59 range. */ + + uint8_t RTC_Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be set to a value in the 0-59 range. */ + + uint8_t RTC_H12; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_AM_PM_Definitions */ +}RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t RTC_WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t RTC_Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t RTC_Date; /*!< Specifies the RTC Date. + This parameter must be set to a value in the 1-31 range. */ + + uint8_t RTC_Year; /*!< Specifies the RTC Date Year. + This parameter must be set to a value in the 0-99 range. */ +}RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef RTC_AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + + uint32_t RTC_AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_AlarmMask_Definitions */ + + uint32_t RTC_AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. + This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ + + uint8_t RTC_AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. + If the Alarm Date is selected, this parameter + must be set to a value in the 1-31 range. + If the Alarm WeekDay is selected, this + parameter can be a value of @ref RTC_WeekDay_Definitions */ +}RTC_AlarmTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RTC_Exported_Constants + * @{ + */ + + +/** @defgroup RTC_Hour_Formats + * @{ + */ +#define RTC_HourFormat_24 ((uint32_t)0x00000000) +#define RTC_HourFormat_12 ((uint32_t)0x00000040) +#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HourFormat_12) || \ + ((FORMAT) == RTC_HourFormat_24)) +/** + * @} + */ + +/** @defgroup RTC_Asynchronous_Predivider + * @{ + */ +#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7F) + +/** + * @} + */ + + +/** @defgroup RTC_Synchronous_Predivider + * @{ + */ +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFF) + +/** + * @} + */ + +/** @defgroup RTC_Time_Definitions + * @{ + */ +#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0) && ((HOUR) <= 12)) +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23) +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59) +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59) + +/** + * @} + */ + +/** @defgroup RTC_AM_PM_Definitions + * @{ + */ +#define RTC_H12_AM ((uint8_t)0x00) +#define RTC_H12_PM ((uint8_t)0x40) +#define IS_RTC_H12(PM) (((PM) == RTC_H12_AM) || ((PM) == RTC_H12_PM)) + +/** + * @} + */ + +/** @defgroup RTC_Year_Date_Definitions + * @{ + */ +#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99) + +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions + * @{ + */ + +/* Coded in BCD format */ +#define RTC_Month_January ((uint8_t)0x01) +#define RTC_Month_February ((uint8_t)0x02) +#define RTC_Month_March ((uint8_t)0x03) +#define RTC_Month_April ((uint8_t)0x04) +#define RTC_Month_May ((uint8_t)0x05) +#define RTC_Month_June ((uint8_t)0x06) +#define RTC_Month_July ((uint8_t)0x07) +#define RTC_Month_August ((uint8_t)0x08) +#define RTC_Month_September ((uint8_t)0x09) +#define RTC_Month_October ((uint8_t)0x10) +#define RTC_Month_November ((uint8_t)0x11) +#define RTC_Month_December ((uint8_t)0x12) +#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1) && ((MONTH) <= 12)) +#define IS_RTC_DATE(DATE) (((DATE) >= 1) && ((DATE) <= 31)) + +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions + * @{ + */ + +#define RTC_Weekday_Monday ((uint8_t)0x01) +#define RTC_Weekday_Tuesday ((uint8_t)0x02) +#define RTC_Weekday_Wednesday ((uint8_t)0x03) +#define RTC_Weekday_Thursday ((uint8_t)0x04) +#define RTC_Weekday_Friday ((uint8_t)0x05) +#define RTC_Weekday_Saturday ((uint8_t)0x06) +#define RTC_Weekday_Sunday ((uint8_t)0x07) +#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \ + ((WEEKDAY) == RTC_Weekday_Tuesday) || \ + ((WEEKDAY) == RTC_Weekday_Wednesday) || \ + ((WEEKDAY) == RTC_Weekday_Thursday) || \ + ((WEEKDAY) == RTC_Weekday_Friday) || \ + ((WEEKDAY) == RTC_Weekday_Saturday) || \ + ((WEEKDAY) == RTC_Weekday_Sunday)) +/** + * @} + */ + + +/** @defgroup RTC_Alarm_Definitions + * @{ + */ +#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0) && ((DATE) <= 31)) +#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \ + ((WEEKDAY) == RTC_Weekday_Tuesday) || \ + ((WEEKDAY) == RTC_Weekday_Wednesday) || \ + ((WEEKDAY) == RTC_Weekday_Thursday) || \ + ((WEEKDAY) == RTC_Weekday_Friday) || \ + ((WEEKDAY) == RTC_Weekday_Saturday) || \ + ((WEEKDAY) == RTC_Weekday_Sunday)) + +/** + * @} + */ + + +/** @defgroup RTC_AlarmDateWeekDay_Definitions + * @{ + */ +#define RTC_AlarmDateWeekDaySel_Date ((uint32_t)0x00000000) +#define RTC_AlarmDateWeekDaySel_WeekDay ((uint32_t)0x40000000) + +#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_AlarmDateWeekDaySel_Date) || \ + ((SEL) == RTC_AlarmDateWeekDaySel_WeekDay)) + +/** + * @} + */ + + +/** @defgroup RTC_AlarmMask_Definitions + * @{ + */ +#define RTC_AlarmMask_None ((uint32_t)0x00000000) +#define RTC_AlarmMask_DateWeekDay ((uint32_t)0x80000000) +#define RTC_AlarmMask_Hours ((uint32_t)0x00800000) +#define RTC_AlarmMask_Minutes ((uint32_t)0x00008000) +#define RTC_AlarmMask_Seconds ((uint32_t)0x00000080) +#define RTC_AlarmMask_All ((uint32_t)0x80808080) +#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET) + +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions + * @{ + */ +#define RTC_Alarm_A ((uint32_t)0x00000100) +#define RTC_Alarm_B ((uint32_t)0x00000200) +#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_Alarm_A) || ((ALARM) == RTC_Alarm_B)) +#define IS_RTC_CMD_ALARM(ALARM) (((ALARM) & (RTC_Alarm_A | RTC_Alarm_B)) != (uint32_t)RESET) + +/** + * @} + */ + + /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions + * @{ + */ +#define RTC_AlarmSubSecondMask_All ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked. + There is no comparison on sub seconds + for Alarm */ +#define RTC_AlarmSubSecondMask_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm + comparison. Only SS[0] is compared. */ +#define RTC_AlarmSubSecondMask_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm + comparison. Only SS[1:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm + comparison. Only SS[2:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm + comparison. Only SS[3:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm + comparison. Only SS[4:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm + comparison. Only SS[5:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm + comparison. Only SS[6:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm + comparison. Only SS[7:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm + comparison. Only SS[8:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm + comparison. Only SS[9:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm + comparison. Only SS[10:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm + comparison.Only SS[11:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm + comparison. Only SS[12:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm + comparison.Only SS[13:0] are compared */ +#define RTC_AlarmSubSecondMask_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match + to activate alarm. */ +#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_AlarmSubSecondMask_All) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_1) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_2) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_3) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_4) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_5) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_6) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_7) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_8) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_9) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_10) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_11) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_12) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_13) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14) || \ + ((MASK) == RTC_AlarmSubSecondMask_None)) +/** + * @} + */ + +/** @defgroup RTC_Alarm_Sub_Seconds_Value + * @{ + */ + +#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= 0x00007FFF) + +/** + * @} + */ + +/** @defgroup RTC_Wakeup_Timer_Definitions + * @{ + */ +#define RTC_WakeUpClock_RTCCLK_Div16 ((uint32_t)0x00000000) +#define RTC_WakeUpClock_RTCCLK_Div8 ((uint32_t)0x00000001) +#define RTC_WakeUpClock_RTCCLK_Div4 ((uint32_t)0x00000002) +#define RTC_WakeUpClock_RTCCLK_Div2 ((uint32_t)0x00000003) +#define RTC_WakeUpClock_CK_SPRE_16bits ((uint32_t)0x00000004) +#define RTC_WakeUpClock_CK_SPRE_17bits ((uint32_t)0x00000006) +#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WakeUpClock_RTCCLK_Div16) || \ + ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div8) || \ + ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div4) || \ + ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div2) || \ + ((CLOCK) == RTC_WakeUpClock_CK_SPRE_16bits) || \ + ((CLOCK) == RTC_WakeUpClock_CK_SPRE_17bits)) +#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF) +/** + * @} + */ + +/** @defgroup RTC_Time_Stamp_Edges_definitions + * @{ + */ +#define RTC_TimeStampEdge_Rising ((uint32_t)0x00000000) +#define RTC_TimeStampEdge_Falling ((uint32_t)0x00000008) +#define IS_RTC_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TimeStampEdge_Rising) || \ + ((EDGE) == RTC_TimeStampEdge_Falling)) +/** + * @} + */ + +/** @defgroup RTC_Output_selection_Definitions + * @{ + */ +#define RTC_Output_Disable ((uint32_t)0x00000000) +#define RTC_Output_AlarmA ((uint32_t)0x00200000) +#define RTC_Output_AlarmB ((uint32_t)0x00400000) +#define RTC_Output_WakeUp ((uint32_t)0x00600000) + +#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_Output_Disable) || \ + ((OUTPUT) == RTC_Output_AlarmA) || \ + ((OUTPUT) == RTC_Output_AlarmB) || \ + ((OUTPUT) == RTC_Output_WakeUp)) + +/** + * @} + */ + +/** @defgroup RTC_Output_Polarity_Definitions + * @{ + */ +#define RTC_OutputPolarity_High ((uint32_t)0x00000000) +#define RTC_OutputPolarity_Low ((uint32_t)0x00100000) +#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OutputPolarity_High) || \ + ((POL) == RTC_OutputPolarity_Low)) +/** + * @} + */ + + +/** @defgroup RTC_Digital_Calibration_Definitions + * @{ + */ +#define RTC_CalibSign_Positive ((uint32_t)0x00000000) +#define RTC_CalibSign_Negative ((uint32_t)0x00000080) +#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CalibSign_Positive) || \ + ((SIGN) == RTC_CalibSign_Negative)) +#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20) + +/** + * @} + */ + + /** @defgroup RTC_Calib_Output_selection_Definitions + * @{ + */ +#define RTC_CalibOutput_512Hz ((uint32_t)0x00000000) +#define RTC_CalibOutput_1Hz ((uint32_t)0x00080000) +#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CalibOutput_512Hz) || \ + ((OUTPUT) == RTC_CalibOutput_1Hz)) +/** + * @} + */ + +/** @defgroup RTC_Smooth_calib_period_Definitions + * @{ + */ +#define RTC_SmoothCalibPeriod_32sec ((uint32_t)0x00000000) /*!< if RTCCLK = 32768 Hz, Smooth calibation + period is 32s, else 2exp20 RTCCLK seconds */ +#define RTC_SmoothCalibPeriod_16sec ((uint32_t)0x00002000) /*!< if RTCCLK = 32768 Hz, Smooth calibation + period is 16s, else 2exp19 RTCCLK seconds */ +#define RTC_SmoothCalibPeriod_8sec ((uint32_t)0x00004000) /*!< if RTCCLK = 32768 Hz, Smooth calibation + period is 8s, else 2exp18 RTCCLK seconds */ +#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SmoothCalibPeriod_32sec) || \ + ((PERIOD) == RTC_SmoothCalibPeriod_16sec) || \ + ((PERIOD) == RTC_SmoothCalibPeriod_8sec)) + +/** + * @} + */ + +/** @defgroup RTC_Smooth_calib_Plus_pulses_Definitions + * @{ + */ +#define RTC_SmoothCalibPlusPulses_Set ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added + during a X -second window = Y - CALM[8:0]. + with Y = 512, 256, 128 when X = 32, 16, 8 */ +#define RTC_SmoothCalibPlusPulses_Reset ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited + during a 32-second window = CALM[8:0]. */ +#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SmoothCalibPlusPulses_Set) || \ + ((PLUS) == RTC_SmoothCalibPlusPulses_Reset)) + +/** + * @} + */ + +/** @defgroup RTC_Smooth_calib_Minus_pulses_Definitions + * @{ + */ +#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF) + +/** + * @} + */ + +/** @defgroup RTC_DayLightSaving_Definitions + * @{ + */ +#define RTC_DayLightSaving_SUB1H ((uint32_t)0x00020000) +#define RTC_DayLightSaving_ADD1H ((uint32_t)0x00010000) +#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DayLightSaving_SUB1H) || \ + ((SAVE) == RTC_DayLightSaving_ADD1H)) + +#define RTC_StoreOperation_Reset ((uint32_t)0x00000000) +#define RTC_StoreOperation_Set ((uint32_t)0x00040000) +#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_StoreOperation_Reset) || \ + ((OPERATION) == RTC_StoreOperation_Set)) +/** + * @} + */ + +/** @defgroup RTC_Tamper_Trigger_Definitions + * @{ + */ +#define RTC_TamperTrigger_RisingEdge ((uint32_t)0x00000000) +#define RTC_TamperTrigger_FallingEdge ((uint32_t)0x00000001) +#define RTC_TamperTrigger_LowLevel ((uint32_t)0x00000000) +#define RTC_TamperTrigger_HighLevel ((uint32_t)0x00000001) +#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TamperTrigger_RisingEdge) || \ + ((TRIGGER) == RTC_TamperTrigger_FallingEdge) || \ + ((TRIGGER) == RTC_TamperTrigger_LowLevel) || \ + ((TRIGGER) == RTC_TamperTrigger_HighLevel)) + +/** + * @} + */ + +/** @defgroup RTC_Tamper_Filter_Definitions + * @{ + */ +#define RTC_TamperFilter_Disable ((uint32_t)0x00000000) /*!< Tamper filter is disabled */ + +#define RTC_TamperFilter_2Sample ((uint32_t)0x00000800) /*!< Tamper is activated after 2 + consecutive samples at the active level */ +#define RTC_TamperFilter_4Sample ((uint32_t)0x00001000) /*!< Tamper is activated after 4 + consecutive samples at the active level */ +#define RTC_TamperFilter_8Sample ((uint32_t)0x00001800) /*!< Tamper is activated after 8 + consecutive samples at the active leve. */ +#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TamperFilter_Disable) || \ + ((FILTER) == RTC_TamperFilter_2Sample) || \ + ((FILTER) == RTC_TamperFilter_4Sample) || \ + ((FILTER) == RTC_TamperFilter_8Sample)) +/** + * @} + */ + +/** @defgroup RTC_Tamper_Sampling_Frequencies_Definitions + * @{ + */ +#define RTC_TamperSamplingFreq_RTCCLK_Div32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 32768 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div16384 ((uint32_t)0x000000100) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 16384 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 8192 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 4096 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 2048 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 1024 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 512 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 256 */ +#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div32768) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div16384) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div8192) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div4096) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div2048) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div1024) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div512) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div256)) + +/** + * @} + */ + + /** @defgroup RTC_Tamper_Pin_Precharge_Duration_Definitions + * @{ + */ +#define RTC_TamperPrechargeDuration_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before + sampling during 1 RTCCLK cycle */ +#define RTC_TamperPrechargeDuration_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before + sampling during 2 RTCCLK cycles */ +#define RTC_TamperPrechargeDuration_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before + sampling during 4 RTCCLK cycles */ +#define RTC_TamperPrechargeDuration_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before + sampling during 8 RTCCLK cycles */ + +#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TamperPrechargeDuration_1RTCCLK) || \ + ((DURATION) == RTC_TamperPrechargeDuration_2RTCCLK) || \ + ((DURATION) == RTC_TamperPrechargeDuration_4RTCCLK) || \ + ((DURATION) == RTC_TamperPrechargeDuration_8RTCCLK)) +/** + * @} + */ + +/** @defgroup RTC_Tamper_Pins_Definitions + * @{ + */ +#define RTC_Tamper_1 RTC_TAFCR_TAMP1E +#define IS_RTC_TAMPER(TAMPER) (((TAMPER) == RTC_Tamper_1)) + +/** + * @} + */ + +/** @defgroup RTC_Tamper_Pin_Selection + * @{ + */ +#define RTC_TamperPin_PC13 ((uint32_t)0x00000000) +#define RTC_TamperPin_PI8 ((uint32_t)0x00010000) +#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TamperPin_PC13) || \ + ((PIN) == RTC_TamperPin_PI8)) +/** + * @} + */ + +/** @defgroup RTC_TimeStamp_Pin_Selection + * @{ + */ +#define RTC_TimeStampPin_PC13 ((uint32_t)0x00000000) +#define RTC_TimeStampPin_PI8 ((uint32_t)0x00020000) +#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TimeStampPin_PC13) || \ + ((PIN) == RTC_TimeStampPin_PI8)) +/** + * @} + */ + +/** @defgroup RTC_Output_Type_ALARM_OUT + * @{ + */ +#define RTC_OutputType_OpenDrain ((uint32_t)0x00000000) +#define RTC_OutputType_PushPull ((uint32_t)0x00040000) +#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OutputType_OpenDrain) || \ + ((TYPE) == RTC_OutputType_PushPull)) + +/** + * @} + */ + +/** @defgroup RTC_Add_1_Second_Parameter_Definitions + * @{ + */ +#define RTC_ShiftAdd1S_Reset ((uint32_t)0x00000000) +#define RTC_ShiftAdd1S_Set ((uint32_t)0x80000000) +#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_ShiftAdd1S_Reset) || \ + ((SEL) == RTC_ShiftAdd1S_Set)) +/** + * @} + */ + +/** @defgroup RTC_Substract_Fraction_Of_Second_Value + * @{ + */ +#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF) + +/** + * @} + */ + +/** @defgroup RTC_Backup_Registers_Definitions + * @{ + */ + +#define RTC_BKP_DR0 ((uint32_t)0x00000000) +#define RTC_BKP_DR1 ((uint32_t)0x00000001) +#define RTC_BKP_DR2 ((uint32_t)0x00000002) +#define RTC_BKP_DR3 ((uint32_t)0x00000003) +#define RTC_BKP_DR4 ((uint32_t)0x00000004) +#define RTC_BKP_DR5 ((uint32_t)0x00000005) +#define RTC_BKP_DR6 ((uint32_t)0x00000006) +#define RTC_BKP_DR7 ((uint32_t)0x00000007) +#define RTC_BKP_DR8 ((uint32_t)0x00000008) +#define RTC_BKP_DR9 ((uint32_t)0x00000009) +#define RTC_BKP_DR10 ((uint32_t)0x0000000A) +#define RTC_BKP_DR11 ((uint32_t)0x0000000B) +#define RTC_BKP_DR12 ((uint32_t)0x0000000C) +#define RTC_BKP_DR13 ((uint32_t)0x0000000D) +#define RTC_BKP_DR14 ((uint32_t)0x0000000E) +#define RTC_BKP_DR15 ((uint32_t)0x0000000F) +#define RTC_BKP_DR16 ((uint32_t)0x00000010) +#define RTC_BKP_DR17 ((uint32_t)0x00000011) +#define RTC_BKP_DR18 ((uint32_t)0x00000012) +#define RTC_BKP_DR19 ((uint32_t)0x00000013) +#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \ + ((BKP) == RTC_BKP_DR1) || \ + ((BKP) == RTC_BKP_DR2) || \ + ((BKP) == RTC_BKP_DR3) || \ + ((BKP) == RTC_BKP_DR4) || \ + ((BKP) == RTC_BKP_DR5) || \ + ((BKP) == RTC_BKP_DR6) || \ + ((BKP) == RTC_BKP_DR7) || \ + ((BKP) == RTC_BKP_DR8) || \ + ((BKP) == RTC_BKP_DR9) || \ + ((BKP) == RTC_BKP_DR10) || \ + ((BKP) == RTC_BKP_DR11) || \ + ((BKP) == RTC_BKP_DR12) || \ + ((BKP) == RTC_BKP_DR13) || \ + ((BKP) == RTC_BKP_DR14) || \ + ((BKP) == RTC_BKP_DR15) || \ + ((BKP) == RTC_BKP_DR16) || \ + ((BKP) == RTC_BKP_DR17) || \ + ((BKP) == RTC_BKP_DR18) || \ + ((BKP) == RTC_BKP_DR19)) +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions + * @{ + */ +#define RTC_Format_BIN ((uint32_t)0x000000000) +#define RTC_Format_BCD ((uint32_t)0x000000001) +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_Format_BIN) || ((FORMAT) == RTC_Format_BCD)) + +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions + * @{ + */ +#define RTC_FLAG_RECALPF ((uint32_t)0x00010000) +#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000) +#define RTC_FLAG_TSOVF ((uint32_t)0x00001000) +#define RTC_FLAG_TSF ((uint32_t)0x00000800) +#define RTC_FLAG_WUTF ((uint32_t)0x00000400) +#define RTC_FLAG_ALRBF ((uint32_t)0x00000200) +#define RTC_FLAG_ALRAF ((uint32_t)0x00000100) +#define RTC_FLAG_INITF ((uint32_t)0x00000040) +#define RTC_FLAG_RSF ((uint32_t)0x00000020) +#define RTC_FLAG_INITS ((uint32_t)0x00000010) +#define RTC_FLAG_SHPF ((uint32_t)0x00000008) +#define RTC_FLAG_WUTWF ((uint32_t)0x00000004) +#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002) +#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001) +#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_TSOVF) || ((FLAG) == RTC_FLAG_TSF) || \ + ((FLAG) == RTC_FLAG_WUTF) || ((FLAG) == RTC_FLAG_ALRBF) || \ + ((FLAG) == RTC_FLAG_ALRAF) || ((FLAG) == RTC_FLAG_INITF) || \ + ((FLAG) == RTC_FLAG_RSF) || ((FLAG) == RTC_FLAG_WUTWF) || \ + ((FLAG) == RTC_FLAG_ALRBWF) || ((FLAG) == RTC_FLAG_ALRAWF) || \ + ((FLAG) == RTC_FLAG_TAMP1F) || ((FLAG) == RTC_FLAG_RECALPF) || \ + ((FLAG) == RTC_FLAG_SHPF)) +#define IS_RTC_CLEAR_FLAG(FLAG) (((FLAG) != (uint32_t)RESET) && (((FLAG) & 0xFFFF00DF) == (uint32_t)RESET)) +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions + * @{ + */ +#define RTC_IT_TS ((uint32_t)0x00008000) +#define RTC_IT_WUT ((uint32_t)0x00004000) +#define RTC_IT_ALRB ((uint32_t)0x00002000) +#define RTC_IT_ALRA ((uint32_t)0x00001000) +#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */ +#define RTC_IT_TAMP1 ((uint32_t)0x00020000) + +#define IS_RTC_CONFIG_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFF0FFB) == (uint32_t)RESET)) +#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_TS) || ((IT) == RTC_IT_WUT) || \ + ((IT) == RTC_IT_ALRB) || ((IT) == RTC_IT_ALRA) || \ + ((IT) == RTC_IT_TAMP1)) +#define IS_RTC_CLEAR_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFD0FFF) == (uint32_t)RESET)) + +/** + * @} + */ + +/** @defgroup RTC_Legacy + * @{ + */ +#define RTC_DigitalCalibConfig RTC_CoarseCalibConfig +#define RTC_DigitalCalibCmd RTC_CoarseCalibCmd + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the RTC configuration to the default reset state *****/ +ErrorStatus RTC_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +ErrorStatus RTC_Init(RTC_InitTypeDef* RTC_InitStruct); +void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct); +void RTC_WriteProtectionCmd(FunctionalState NewState); +ErrorStatus RTC_EnterInitMode(void); +void RTC_ExitInitMode(void); +ErrorStatus RTC_WaitForSynchro(void); +ErrorStatus RTC_RefClockCmd(FunctionalState NewState); +void RTC_BypassShadowCmd(FunctionalState NewState); + +/* Time and Date configuration functions **************************************/ +ErrorStatus RTC_SetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct); +void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct); +void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct); +uint32_t RTC_GetSubSecond(void); +ErrorStatus RTC_SetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct); +void RTC_DateStructInit(RTC_DateTypeDef* RTC_DateStruct); +void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct); + +/* Alarms (Alarm A and Alarm B) configuration functions **********************/ +void RTC_SetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct); +void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct); +void RTC_GetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct); +ErrorStatus RTC_AlarmCmd(uint32_t RTC_Alarm, FunctionalState NewState); +void RTC_AlarmSubSecondConfig(uint32_t RTC_Alarm, uint32_t RTC_AlarmSubSecondValue, uint32_t RTC_AlarmSubSecondMask); +uint32_t RTC_GetAlarmSubSecond(uint32_t RTC_Alarm); + +/* WakeUp Timer configuration functions ***************************************/ +void RTC_WakeUpClockConfig(uint32_t RTC_WakeUpClock); +void RTC_SetWakeUpCounter(uint32_t RTC_WakeUpCounter); +uint32_t RTC_GetWakeUpCounter(void); +ErrorStatus RTC_WakeUpCmd(FunctionalState NewState); + +/* Daylight Saving configuration functions ************************************/ +void RTC_DayLightSavingConfig(uint32_t RTC_DayLightSaving, uint32_t RTC_StoreOperation); +uint32_t RTC_GetStoreOperation(void); + +/* Output pin Configuration function ******************************************/ +void RTC_OutputConfig(uint32_t RTC_Output, uint32_t RTC_OutputPolarity); + +/* Digital Calibration configuration functions *********************************/ +ErrorStatus RTC_CoarseCalibConfig(uint32_t RTC_CalibSign, uint32_t Value); +ErrorStatus RTC_CoarseCalibCmd(FunctionalState NewState); +void RTC_CalibOutputCmd(FunctionalState NewState); +void RTC_CalibOutputConfig(uint32_t RTC_CalibOutput); +ErrorStatus RTC_SmoothCalibConfig(uint32_t RTC_SmoothCalibPeriod, + uint32_t RTC_SmoothCalibPlusPulses, + uint32_t RTC_SmouthCalibMinusPulsesValue); + +/* TimeStamp configuration functions ******************************************/ +void RTC_TimeStampCmd(uint32_t RTC_TimeStampEdge, FunctionalState NewState); +void RTC_GetTimeStamp(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_StampTimeStruct, + RTC_DateTypeDef* RTC_StampDateStruct); +uint32_t RTC_GetTimeStampSubSecond(void); + +/* Tampers configuration functions ********************************************/ +void RTC_TamperTriggerConfig(uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger); +void RTC_TamperCmd(uint32_t RTC_Tamper, FunctionalState NewState); +void RTC_TamperFilterConfig(uint32_t RTC_TamperFilter); +void RTC_TamperSamplingFreqConfig(uint32_t RTC_TamperSamplingFreq); +void RTC_TamperPinsPrechargeDuration(uint32_t RTC_TamperPrechargeDuration); +void RTC_TimeStampOnTamperDetectionCmd(FunctionalState NewState); +void RTC_TamperPullUpCmd(FunctionalState NewState); + +/* Backup Data Registers configuration functions ******************************/ +void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data); +uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR); + +/* RTC Tamper and TimeStamp Pins Selection and Output Type Config configuration + functions ******************************************************************/ +void RTC_TamperPinSelection(uint32_t RTC_TamperPin); +void RTC_TimeStampPinSelection(uint32_t RTC_TimeStampPin); +void RTC_OutputTypeConfig(uint32_t RTC_OutputType); + +/* RTC_Shift_control_synchonisation_functions *********************************/ +ErrorStatus RTC_SynchroShiftConfig(uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS); + +/* Interrupts and flags management functions **********************************/ +void RTC_ITConfig(uint32_t RTC_IT, FunctionalState NewState); +FlagStatus RTC_GetFlagStatus(uint32_t RTC_FLAG); +void RTC_ClearFlag(uint32_t RTC_FLAG); +ITStatus RTC_GetITStatus(uint32_t RTC_IT); +void RTC_ClearITPendingBit(uint32_t RTC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_RTC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_sdio.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_sdio.c new file mode 100644 index 00000000000..df31c9f45e8 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_sdio.c @@ -0,0 +1,1005 @@ +/** + ****************************************************************************** + * @file stm32f4xx_sdio.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Secure digital input/output interface (SDIO) + * peripheral: + * - Initialization and Configuration + * - Command path state machine (CPSM) management + * - Data path state machine (DPSM) management + * - SDIO IO Cards mode management + * - CE-ATA mode management + * - DMA transfers management + * - Interrupts and flags management + * + * @verbatim + * + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. The SDIO clock (SDIOCLK = 48 MHz) is coming from a specific output + * of PLL (PLL48CLK). Before to start working with SDIO peripheral + * make sure that the PLL is well configured. + * The SDIO peripheral uses two clock signals: + * - SDIO adapter clock (SDIOCLK = 48 MHz) + * - APB2 bus clock (PCLK2) + * PCLK2 and SDIO_CK clock frequencies must respect the following condition: + * Frequenc(PCLK2) >= (3 / 8 x Frequency(SDIO_CK)) + * + * 2. Enable peripheral clock using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SDIO, ENABLE). + * + * 3. According to the SDIO mode, enable the GPIO clocks using + * RCC_AHB1PeriphClockCmd() function. + * The I/O can be one of the following configurations: + * - 1-bit data length: SDIO_CMD, SDIO_CK and D0. + * - 4-bit data length: SDIO_CMD, SDIO_CK and D[3:0]. + * - 8-bit data length: SDIO_CMD, SDIO_CK and D[7:0]. + * + * 4. Peripheral's alternate function: + * - Connect the pin to the desired peripherals' Alternate + * Function (AF) using GPIO_PinAFConfig() function + * - Configure the desired pin in alternate function by: + * GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF + * - Select the type, pull-up/pull-down and output speed via + * GPIO_PuPd, GPIO_OType and GPIO_Speed members + * - Call GPIO_Init() function + * + * 5. Program the Clock Edge, Clock Bypass, Clock Power Save, Bus Wide, + * hardware, flow control and the Clock Divider using the SDIO_Init() + * function. + * + * 6. Enable the Power ON State using the SDIO_SetPowerState(SDIO_PowerState_ON) + * function. + * + * 7. Enable the clock using the SDIO_ClockCmd() function. + * + * 8. Enable the NVIC and the corresponding interrupt using the function + * SDIO_ITConfig() if you need to use interrupt mode. + * + * 9. When using the DMA mode + * - Configure the DMA using DMA_Init() function + * - Active the needed channel Request using SDIO_DMACmd() function + * + * 10. Enable the DMA using the DMA_Cmd() function, when using DMA mode. + * + * 11. To control the CPSM (Command Path State Machine) and send + * commands to the card use the SDIO_SendCommand(), + * SDIO_GetCommandResponse() and SDIO_GetResponse() functions. + * First, user has to fill the command structure (pointer to + * SDIO_CmdInitTypeDef) according to the selected command to be sent. + * The parameters that should be filled are: + * - Command Argument + * - Command Index + * - Command Response type + * - Command Wait + * - CPSM Status (Enable or Disable) + * + * To check if the command is well received, read the SDIO_CMDRESP + * register using the SDIO_GetCommandResponse(). + * The SDIO responses registers (SDIO_RESP1 to SDIO_RESP2), use the + * SDIO_GetResponse() function. + * + * 12. To control the DPSM (Data Path State Machine) and send/receive + * data to/from the card use the SDIO_DataConfig(), SDIO_GetDataCounter(), + * SDIO_ReadData(), SDIO_WriteData() and SDIO_GetFIFOCount() functions. + * + * Read Operations + * --------------- + * a) First, user has to fill the data structure (pointer to + * SDIO_DataInitTypeDef) according to the selected data type to + * be received. + * The parameters that should be filled are: + * - Data TimeOut + * - Data Length + * - Data Block size + * - Data Transfer direction: should be from card (To SDIO) + * - Data Transfer mode + * - DPSM Status (Enable or Disable) + * + * b) Configure the SDIO resources to receive the data from the card + * according to selected transfer mode (Refer to Step 8, 9 and 10). + * + * c) Send the selected Read command (refer to step 11). + * + * d) Use the SDIO flags/interrupts to check the transfer status. + * + * Write Operations + * --------------- + * a) First, user has to fill the data structure (pointer to + * SDIO_DataInitTypeDef) according to the selected data type to + * be received. + * The parameters that should be filled are: + * - Data TimeOut + * - Data Length + * - Data Block size + * - Data Transfer direction: should be to card (To CARD) + * - Data Transfer mode + * - DPSM Status (Enable or Disable) + * + * b) Configure the SDIO resources to send the data to the card + * according to selected transfer mode (Refer to Step 8, 9 and 10). + * + * c) Send the selected Write command (refer to step 11). + * + * d) Use the SDIO flags/interrupts to check the transfer status. + * + * + * @endverbatim + * + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_sdio.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup SDIO + * @brief SDIO driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ------------ SDIO registers bit address in the alias region ----------- */ +#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) + +/* --- CLKCR Register ---*/ +/* Alias word address of CLKEN bit */ +#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) +#define CLKEN_BitNumber 0x08 +#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4)) + +/* --- CMD Register ---*/ +/* Alias word address of SDIOSUSPEND bit */ +#define CMD_OFFSET (SDIO_OFFSET + 0x0C) +#define SDIOSUSPEND_BitNumber 0x0B +#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4)) + +/* Alias word address of ENCMDCOMPL bit */ +#define ENCMDCOMPL_BitNumber 0x0C +#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4)) + +/* Alias word address of NIEN bit */ +#define NIEN_BitNumber 0x0D +#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4)) + +/* Alias word address of ATACMD bit */ +#define ATACMD_BitNumber 0x0E +#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4)) + +/* --- DCTRL Register ---*/ +/* Alias word address of DMAEN bit */ +#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) +#define DMAEN_BitNumber 0x03 +#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4)) + +/* Alias word address of RWSTART bit */ +#define RWSTART_BitNumber 0x08 +#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4)) + +/* Alias word address of RWSTOP bit */ +#define RWSTOP_BitNumber 0x09 +#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4)) + +/* Alias word address of RWMOD bit */ +#define RWMOD_BitNumber 0x0A +#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4)) + +/* Alias word address of SDIOEN bit */ +#define SDIOEN_BitNumber 0x0B +#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4)) + +/* ---------------------- SDIO registers bit mask ------------------------ */ +/* --- CLKCR Register ---*/ +/* CLKCR register clear mask */ +#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100) + +/* --- PWRCTRL Register ---*/ +/* SDIO PWRCTRL Mask */ +#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC) + +/* --- DCTRL Register ---*/ +/* SDIO DCTRL Clear Mask */ +#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08) + +/* --- CMD Register ---*/ +/* CMD Register clear mask */ +#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800) + +/* SDIO RESP Registers Address */ +#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SDIO_Private_Functions + * @{ + */ + +/** @defgroup SDIO_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the SDIO peripheral registers to their default reset values. + * @param None + * @retval None + */ +void SDIO_DeInit(void) +{ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SDIO, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SDIO, DISABLE); +} + +/** + * @brief Initializes the SDIO peripheral according to the specified + * parameters in the SDIO_InitStruct. + * @param SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure + * that contains the configuration information for the SDIO peripheral. + * @retval None + */ +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge)); + assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass)); + assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave)); + assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide)); + assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); + +/*---------------------------- SDIO CLKCR Configuration ------------------------*/ + /* Get the SDIO CLKCR value */ + tmpreg = SDIO->CLKCR; + + /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */ + tmpreg &= CLKCR_CLEAR_MASK; + + /* Set CLKDIV bits according to SDIO_ClockDiv value */ + /* Set PWRSAV bit according to SDIO_ClockPowerSave value */ + /* Set BYPASS bit according to SDIO_ClockBypass value */ + /* Set WIDBUS bits according to SDIO_BusWide value */ + /* Set NEGEDGE bits according to SDIO_ClockEdge value */ + /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */ + tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave | + SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide | + SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); + + /* Write to SDIO CLKCR */ + SDIO->CLKCR = tmpreg; +} + +/** + * @brief Fills each SDIO_InitStruct member with its default value. + * @param SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which + * will be initialized. + * @retval None + */ +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct) +{ + /* SDIO_InitStruct members default value */ + SDIO_InitStruct->SDIO_ClockDiv = 0x00; + SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising; + SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable; + SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; + SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b; + SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; +} + +/** + * @brief Enables or disables the SDIO Clock. + * @param NewState: new state of the SDIO Clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_ClockCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState; +} + +/** + * @brief Sets the power status of the controller. + * @param SDIO_PowerState: new state of the Power state. + * This parameter can be one of the following values: + * @arg SDIO_PowerState_OFF: SDIO Power OFF + * @arg SDIO_PowerState_ON: SDIO Power ON + * @retval None + */ +void SDIO_SetPowerState(uint32_t SDIO_PowerState) +{ + /* Check the parameters */ + assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState)); + + SDIO->POWER = SDIO_PowerState; +} + +/** + * @brief Gets the power status of the controller. + * @param None + * @retval Power status of the controller. The returned value can be one of the + * following values: + * - 0x00: Power OFF + * - 0x02: Power UP + * - 0x03: Power ON + */ +uint32_t SDIO_GetPowerState(void) +{ + return (SDIO->POWER & (~PWR_PWRCTRL_MASK)); +} + +/** + * @} + */ + +/** @defgroup SDIO_Group2 Command path state machine (CPSM) management functions + * @brief Command path state machine (CPSM) management functions + * +@verbatim + =============================================================================== + Command path state machine (CPSM) management functions + =============================================================================== + + This section provide functions allowing to program and read the Command path + state machine (CPSM). + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SDIO Command according to the specified + * parameters in the SDIO_CmdInitStruct and send the command. + * @param SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef + * structure that contains the configuration information for the SDIO + * command. + * @retval None + */ +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex)); + assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response)); + assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait)); + assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM)); + +/*---------------------------- SDIO ARG Configuration ------------------------*/ + /* Set the SDIO Argument value */ + SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument; + +/*---------------------------- SDIO CMD Configuration ------------------------*/ + /* Get the SDIO CMD value */ + tmpreg = SDIO->CMD; + /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */ + tmpreg &= CMD_CLEAR_MASK; + /* Set CMDINDEX bits according to SDIO_CmdIndex value */ + /* Set WAITRESP bits according to SDIO_Response value */ + /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */ + /* Set CPSMEN bits according to SDIO_CPSM value */ + tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response + | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM; + + /* Write to SDIO CMD */ + SDIO->CMD = tmpreg; +} + +/** + * @brief Fills each SDIO_CmdInitStruct member with its default value. + * @param SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef + * structure which will be initialized. + * @retval None + */ +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct) +{ + /* SDIO_CmdInitStruct members default value */ + SDIO_CmdInitStruct->SDIO_Argument = 0x00; + SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00; + SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No; + SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No; + SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable; +} + +/** + * @brief Returns command index of last command for which response received. + * @param None + * @retval Returns the command index of the last command response received. + */ +uint8_t SDIO_GetCommandResponse(void) +{ + return (uint8_t)(SDIO->RESPCMD); +} + +/** + * @brief Returns response received from the card for the last command. + * @param SDIO_RESP: Specifies the SDIO response register. + * This parameter can be one of the following values: + * @arg SDIO_RESP1: Response Register 1 + * @arg SDIO_RESP2: Response Register 2 + * @arg SDIO_RESP3: Response Register 3 + * @arg SDIO_RESP4: Response Register 4 + * @retval The Corresponding response register value. + */ +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_RESP(SDIO_RESP)); + + tmp = SDIO_RESP_ADDR + SDIO_RESP; + + return (*(__IO uint32_t *) tmp); +} + +/** + * @} + */ + +/** @defgroup SDIO_Group3 Data path state machine (DPSM) management functions + * @brief Data path state machine (DPSM) management functions + * +@verbatim + =============================================================================== + Data path state machine (DPSM) management functions + =============================================================================== + + This section provide functions allowing to program and read the Data path + state machine (DPSM). + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SDIO data path according to the specified + * parameters in the SDIO_DataInitStruct. + * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure + * that contains the configuration information for the SDIO command. + * @retval None + */ +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength)); + assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize)); + assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir)); + assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode)); + assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM)); + +/*---------------------------- SDIO DTIMER Configuration ---------------------*/ + /* Set the SDIO Data TimeOut value */ + SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut; + +/*---------------------------- SDIO DLEN Configuration -----------------------*/ + /* Set the SDIO DataLength value */ + SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength; + +/*---------------------------- SDIO DCTRL Configuration ----------------------*/ + /* Get the SDIO DCTRL value */ + tmpreg = SDIO->DCTRL; + /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */ + tmpreg &= DCTRL_CLEAR_MASK; + /* Set DEN bit according to SDIO_DPSM value */ + /* Set DTMODE bit according to SDIO_TransferMode value */ + /* Set DTDIR bit according to SDIO_TransferDir value */ + /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */ + tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir + | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM; + + /* Write to SDIO DCTRL */ + SDIO->DCTRL = tmpreg; +} + +/** + * @brief Fills each SDIO_DataInitStruct member with its default value. + * @param SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure + * which will be initialized. + * @retval None + */ +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct) +{ + /* SDIO_DataInitStruct members default value */ + SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF; + SDIO_DataInitStruct->SDIO_DataLength = 0x00; + SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b; + SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard; + SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block; + SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable; +} + +/** + * @brief Returns number of remaining data bytes to be transferred. + * @param None + * @retval Number of remaining data bytes to be transferred + */ +uint32_t SDIO_GetDataCounter(void) +{ + return SDIO->DCOUNT; +} + +/** + * @brief Read one data word from Rx FIFO. + * @param None + * @retval Data received + */ +uint32_t SDIO_ReadData(void) +{ + return SDIO->FIFO; +} + +/** + * @brief Write one data word to Tx FIFO. + * @param Data: 32-bit data word to write. + * @retval None + */ +void SDIO_WriteData(uint32_t Data) +{ + SDIO->FIFO = Data; +} + +/** + * @brief Returns the number of words left to be written to or read from FIFO. + * @param None + * @retval Remaining number of words. + */ +uint32_t SDIO_GetFIFOCount(void) +{ + return SDIO->FIFOCNT; +} + +/** + * @} + */ + +/** @defgroup SDIO_Group4 SDIO IO Cards mode management functions + * @brief SDIO IO Cards mode management functions + * +@verbatim + =============================================================================== + SDIO IO Cards mode management functions + =============================================================================== + + This section provide functions allowing to program and read the SDIO IO Cards. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the SD I/O Read Wait operation. + * @param NewState: new state of the Start SDIO Read Wait operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_StartSDIOReadWait(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState; +} + +/** + * @brief Stops the SD I/O Read Wait operation. + * @param NewState: new state of the Stop SDIO Read Wait operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_StopSDIOReadWait(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState; +} + +/** + * @brief Sets one of the two options of inserting read wait interval. + * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode. + * This parameter can be: + * @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK + * @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2 + * @retval None + */ +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode) +{ + /* Check the parameters */ + assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); + + *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode; +} + +/** + * @brief Enables or disables the SD I/O Mode Operation. + * @param NewState: new state of SDIO specific operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SetSDIOOperation(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the SD I/O Mode suspend command sending. + * @param NewState: new state of the SD I/O Mode suspend command. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState; +} + +/** + * @} + */ + +/** @defgroup SDIO_Group5 CE-ATA mode management functions + * @brief CE-ATA mode management functions + * +@verbatim + =============================================================================== + CE-ATA mode management functions + =============================================================================== + + This section provide functions allowing to program and read the CE-ATA card. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the command completion signal. + * @param NewState: new state of command completion signal. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_CommandCompletionCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the CE-ATA interrupt. + * @param NewState: new state of CE-ATA interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_CEATAITCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1)); +} + +/** + * @brief Sends CE-ATA command (CMD61). + * @param NewState: new state of CE-ATA command. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SendCEATACmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState; +} + +/** + * @} + */ + +/** @defgroup SDIO_Group6 DMA transfers management functions + * @brief DMA transfers management functions + * +@verbatim + =============================================================================== + DMA transfers management functions + =============================================================================== + + This section provide functions allowing to program SDIO DMA transfer. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the SDIO DMA request. + * @param NewState: new state of the selected SDIO DMA request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_DMACmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState; +} + +/** + * @} + */ + +/** @defgroup SDIO_Group7 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the SDIO interrupts. + * @param SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @param NewState: new state of the specified SDIO interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SDIO_IT(SDIO_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the SDIO interrupts */ + SDIO->MASK |= SDIO_IT; + } + else + { + /* Disable the SDIO interrupts */ + SDIO->MASK &= ~SDIO_IT; + } +} + +/** + * @brief Checks whether the specified SDIO flag is set or not. + * @param SDIO_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_CMDACT: Command transfer in progress + * @arg SDIO_FLAG_TXACT: Data transmit in progress + * @arg SDIO_FLAG_RXACT: Data receive in progress + * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full + * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval The new state of SDIO_FLAG (SET or RESET). + */ +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_SDIO_FLAG(SDIO_FLAG)); + + if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the SDIO's pending flags. + * @param SDIO_FLAG: specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +void SDIO_ClearFlag(uint32_t SDIO_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG)); + + SDIO->ICR = SDIO_FLAG; +} + +/** + * @brief Checks whether the specified SDIO interrupt has occurred or not. + * @param SDIO_IT: specifies the SDIO interrupt source to check. + * This parameter can be one of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval The new state of SDIO_IT (SET or RESET). + */ +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT) +{ + ITStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_SDIO_GET_IT(SDIO_IT)); + if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the SDIO's interrupt pending bits. + * @param SDIO_IT: specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +void SDIO_ClearITPendingBit(uint32_t SDIO_IT) +{ + /* Check the parameters */ + assert_param(IS_SDIO_CLEAR_IT(SDIO_IT)); + + SDIO->ICR = SDIO_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_sdio.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_sdio.h new file mode 100644 index 00000000000..98f9098ee7e --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_sdio.h @@ -0,0 +1,530 @@ +/** + ****************************************************************************** + * @file stm32f4xx_sdio.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the SDIO firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_SDIO_H +#define __STM32F4xx_SDIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SDIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +typedef struct +{ + uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SDIO_Clock_Edge */ + + uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is + enabled or disabled. + This parameter can be a value of @ref SDIO_Clock_Bypass */ + + uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDIO_Clock_Power_Save */ + + uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. + This parameter can be a value of @ref SDIO_Bus_Wide */ + + uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ + + uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. + This parameter can be a value between 0x00 and 0xFF. */ + +} SDIO_InitTypeDef; + +typedef struct +{ + uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register */ + + uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ + + uint32_t SDIO_Response; /*!< Specifies the SDIO response type. + This parameter can be a value of @ref SDIO_Response_Type */ + + uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled. + This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ + + uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_CPSM_State */ +} SDIO_CmdInitTypeDef; + +typedef struct +{ + uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDIO_Data_Block_Size */ + + uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDIO_Transfer_Direction */ + + uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDIO_Transfer_Type */ + + uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_DPSM_State */ +} SDIO_DataInitTypeDef; + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SDIO_Exported_Constants + * @{ + */ + +/** @defgroup SDIO_Clock_Edge + * @{ + */ + +#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) +#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) +#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ + ((EDGE) == SDIO_ClockEdge_Falling)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Bypass + * @{ + */ + +#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) +#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ + ((BYPASS) == SDIO_ClockBypass_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Power_Save + * @{ + */ + +#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) +#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) +#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ + ((SAVE) == SDIO_ClockPowerSave_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Bus_Wide + * @{ + */ + +#define SDIO_BusWide_1b ((uint32_t)0x00000000) +#define SDIO_BusWide_4b ((uint32_t)0x00000800) +#define SDIO_BusWide_8b ((uint32_t)0x00001000) +#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ + ((WIDE) == SDIO_BusWide_8b)) + +/** + * @} + */ + +/** @defgroup SDIO_Hardware_Flow_Control + * @{ + */ + +#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) +#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) +#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ + ((CONTROL) == SDIO_HardwareFlowControl_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Power_State + * @{ + */ + +#define SDIO_PowerState_OFF ((uint32_t)0x00000000) +#define SDIO_PowerState_ON ((uint32_t)0x00000003) +#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) +/** + * @} + */ + + +/** @defgroup SDIO_Interrupt_sources + * @{ + */ + +#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) +#define SDIO_IT_CMDREND ((uint32_t)0x00000040) +#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) +#define SDIO_IT_DATAEND ((uint32_t)0x00000100) +#define SDIO_IT_STBITERR ((uint32_t)0x00000200) +#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) +#define SDIO_IT_CMDACT ((uint32_t)0x00000800) +#define SDIO_IT_TXACT ((uint32_t)0x00001000) +#define SDIO_IT_RXACT ((uint32_t)0x00002000) +#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) +#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) +#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) +#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup SDIO_Command_Index + * @{ + */ + +#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) +/** + * @} + */ + +/** @defgroup SDIO_Response_Type + * @{ + */ + +#define SDIO_Response_No ((uint32_t)0x00000000) +#define SDIO_Response_Short ((uint32_t)0x00000040) +#define SDIO_Response_Long ((uint32_t)0x000000C0) +#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ + ((RESPONSE) == SDIO_Response_Short) || \ + ((RESPONSE) == SDIO_Response_Long)) +/** + * @} + */ + +/** @defgroup SDIO_Wait_Interrupt_State + * @{ + */ + +#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ +#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ +#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ +#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ + ((WAIT) == SDIO_Wait_Pend)) +/** + * @} + */ + +/** @defgroup SDIO_CPSM_State + * @{ + */ + +#define SDIO_CPSM_Disable ((uint32_t)0x00000000) +#define SDIO_CPSM_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Response_Registers + * @{ + */ + +#define SDIO_RESP1 ((uint32_t)0x00000000) +#define SDIO_RESP2 ((uint32_t)0x00000004) +#define SDIO_RESP3 ((uint32_t)0x00000008) +#define SDIO_RESP4 ((uint32_t)0x0000000C) +#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ + ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) +/** + * @} + */ + +/** @defgroup SDIO_Data_Length + * @{ + */ + +#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) +/** + * @} + */ + +/** @defgroup SDIO_Data_Block_Size + * @{ + */ + +#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) +#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) +#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) +#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) +#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) +#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) +#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) +#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) +#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) +#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) +#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) +#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) +#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) +#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) +#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) +#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ + ((SIZE) == SDIO_DataBlockSize_2b) || \ + ((SIZE) == SDIO_DataBlockSize_4b) || \ + ((SIZE) == SDIO_DataBlockSize_8b) || \ + ((SIZE) == SDIO_DataBlockSize_16b) || \ + ((SIZE) == SDIO_DataBlockSize_32b) || \ + ((SIZE) == SDIO_DataBlockSize_64b) || \ + ((SIZE) == SDIO_DataBlockSize_128b) || \ + ((SIZE) == SDIO_DataBlockSize_256b) || \ + ((SIZE) == SDIO_DataBlockSize_512b) || \ + ((SIZE) == SDIO_DataBlockSize_1024b) || \ + ((SIZE) == SDIO_DataBlockSize_2048b) || \ + ((SIZE) == SDIO_DataBlockSize_4096b) || \ + ((SIZE) == SDIO_DataBlockSize_8192b) || \ + ((SIZE) == SDIO_DataBlockSize_16384b)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Direction + * @{ + */ + +#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) +#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) +#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ + ((DIR) == SDIO_TransferDir_ToSDIO)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Type + * @{ + */ + +#define SDIO_TransferMode_Block ((uint32_t)0x00000000) +#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) +#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ + ((MODE) == SDIO_TransferMode_Block)) +/** + * @} + */ + +/** @defgroup SDIO_DPSM_State + * @{ + */ + +#define SDIO_DPSM_Disable ((uint32_t)0x00000000) +#define SDIO_DPSM_Enable ((uint32_t)0x00000001) +#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Flags + * @{ + */ + +#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) +#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) +#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) +#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) +#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) +#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) +#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) +#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) +#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) +#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) +#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) +#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) +#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_TXUNDERR) || \ + ((FLAG) == SDIO_FLAG_RXOVERR) || \ + ((FLAG) == SDIO_FLAG_CMDREND) || \ + ((FLAG) == SDIO_FLAG_CMDSENT) || \ + ((FLAG) == SDIO_FLAG_DATAEND) || \ + ((FLAG) == SDIO_FLAG_STBITERR) || \ + ((FLAG) == SDIO_FLAG_DBCKEND) || \ + ((FLAG) == SDIO_FLAG_CMDACT) || \ + ((FLAG) == SDIO_FLAG_TXACT) || \ + ((FLAG) == SDIO_FLAG_RXACT) || \ + ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOF) || \ + ((FLAG) == SDIO_FLAG_RXFIFOF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOE) || \ + ((FLAG) == SDIO_FLAG_TXDAVL) || \ + ((FLAG) == SDIO_FLAG_RXDAVL) || \ + ((FLAG) == SDIO_FLAG_SDIOIT) || \ + ((FLAG) == SDIO_FLAG_CEATAEND)) + +#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) + +#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ + ((IT) == SDIO_IT_DCRCFAIL) || \ + ((IT) == SDIO_IT_CTIMEOUT) || \ + ((IT) == SDIO_IT_DTIMEOUT) || \ + ((IT) == SDIO_IT_TXUNDERR) || \ + ((IT) == SDIO_IT_RXOVERR) || \ + ((IT) == SDIO_IT_CMDREND) || \ + ((IT) == SDIO_IT_CMDSENT) || \ + ((IT) == SDIO_IT_DATAEND) || \ + ((IT) == SDIO_IT_STBITERR) || \ + ((IT) == SDIO_IT_DBCKEND) || \ + ((IT) == SDIO_IT_CMDACT) || \ + ((IT) == SDIO_IT_TXACT) || \ + ((IT) == SDIO_IT_RXACT) || \ + ((IT) == SDIO_IT_TXFIFOHE) || \ + ((IT) == SDIO_IT_RXFIFOHF) || \ + ((IT) == SDIO_IT_TXFIFOF) || \ + ((IT) == SDIO_IT_RXFIFOF) || \ + ((IT) == SDIO_IT_TXFIFOE) || \ + ((IT) == SDIO_IT_RXFIFOE) || \ + ((IT) == SDIO_IT_TXDAVL) || \ + ((IT) == SDIO_IT_RXDAVL) || \ + ((IT) == SDIO_IT_SDIOIT) || \ + ((IT) == SDIO_IT_CEATAEND)) + +#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup SDIO_Read_Wait_Mode + * @{ + */ + +#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000000) +#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000001) +#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ + ((MODE) == SDIO_ReadWaitMode_DATA2)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/* Function used to set the SDIO configuration to the default reset state ****/ +void SDIO_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_ClockCmd(FunctionalState NewState); +void SDIO_SetPowerState(uint32_t SDIO_PowerState); +uint32_t SDIO_GetPowerState(void); + +/* Command path state machine (CPSM) management functions *********************/ +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); +uint8_t SDIO_GetCommandResponse(void); +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); + +/* Data path state machine (DPSM) management functions ************************/ +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +uint32_t SDIO_GetDataCounter(void); +uint32_t SDIO_ReadData(void); +void SDIO_WriteData(uint32_t Data); +uint32_t SDIO_GetFIFOCount(void); + +/* SDIO IO Cards mode management functions ************************************/ +void SDIO_StartSDIOReadWait(FunctionalState NewState); +void SDIO_StopSDIOReadWait(FunctionalState NewState); +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); +void SDIO_SetSDIOOperation(FunctionalState NewState); +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); + +/* CE-ATA mode management functions *******************************************/ +void SDIO_CommandCompletionCmd(FunctionalState NewState); +void SDIO_CEATAITCmd(FunctionalState NewState); +void SDIO_SendCEATACmd(FunctionalState NewState); + +/* DMA transfers management functions *****************************************/ +void SDIO_DMACmd(FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); +void SDIO_ClearFlag(uint32_t SDIO_FLAG); +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); +void SDIO_ClearITPendingBit(uint32_t SDIO_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_SDIO_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.c new file mode 100644 index 00000000000..5ffcf0fab71 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.c @@ -0,0 +1,1287 @@ +/** + ****************************************************************************** + * @file stm32f4xx_spi.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Serial peripheral interface (SPI): + * - Initialization and Configuration + * - Data transfers functions + * - Hardware CRC Calculation + * - DMA transfers management + * - Interrupts and flags management + * + * @verbatim + * + * + * =================================================================== + * How to use this driver + * =================================================================== + * + * 1. Enable peripheral clock using the following functions + * RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE) for SPI1 + * RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE) for SPI2 + * RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE) for SPI3. + * + * 2. Enable SCK, MOSI, MISO and NSS GPIO clocks using RCC_AHB1PeriphClockCmd() + * function. + * In I2S mode, if an external clock source is used then the I2S CKIN pin GPIO + * clock should also be enabled. + * + * 3. Peripherals alternate function: + * - Connect the pin to the desired peripherals' Alternate + * Function (AF) using GPIO_PinAFConfig() function + * - Configure the desired pin in alternate function by: + * GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF + * - Select the type, pull-up/pull-down and output speed via + * GPIO_PuPd, GPIO_OType and GPIO_Speed members + * - Call GPIO_Init() function + * In I2S mode, if an external clock source is used then the I2S CKIN pin + * should be also configured in Alternate function Push-pull pull-up mode. + * + * 4. Program the Polarity, Phase, First Data, Baud Rate Prescaler, Slave + * Management, Peripheral Mode and CRC Polynomial values using the SPI_Init() + * function. + * In I2S mode, program the Mode, Standard, Data Format, MCLK Output, Audio + * frequency and Polarity using I2S_Init() function. + * For I2S mode, make sure that either: + * - I2S PLL is configured using the functions RCC_I2SCLKConfig(RCC_I2S2CLKSource_PLLI2S), + * RCC_PLLI2SCmd(ENABLE) and RCC_GetFlagStatus(RCC_FLAG_PLLI2SRDY). + * or + * - External clock source is configured using the function + * RCC_I2SCLKConfig(RCC_I2S2CLKSource_Ext) and after setting correctly the define constant + * I2S_EXTERNAL_CLOCK_VAL in the stm32f4xx_conf.h file. + * + * 5. Enable the NVIC and the corresponding interrupt using the function + * SPI_ITConfig() if you need to use interrupt mode. + * + * 6. When using the DMA mode + * - Configure the DMA using DMA_Init() function + * - Active the needed channel Request using SPI_I2S_DMACmd() function + * + * 7. Enable the SPI using the SPI_Cmd() function or enable the I2S using + * I2S_Cmd(). + * + * 8. Enable the DMA using the DMA_Cmd() function when using DMA mode. + * + * 9. Optionally, you can enable/configure the following parameters without + * re-initialization (i.e there is no need to call again SPI_Init() function): + * - When bidirectional mode (SPI_Direction_1Line_Rx or SPI_Direction_1Line_Tx) + * is programmed as Data direction parameter using the SPI_Init() function + * it can be possible to switch between SPI_Direction_Tx or SPI_Direction_Rx + * using the SPI_BiDirectionalLineConfig() function. + * - When SPI_NSS_Soft is selected as Slave Select Management parameter + * using the SPI_Init() function it can be possible to manage the + * NSS internal signal using the SPI_NSSInternalSoftwareConfig() function. + * - Reconfigure the data size using the SPI_DataSizeConfig() function + * - Enable or disable the SS output using the SPI_SSOutputCmd() function + * + * 10. To use the CRC Hardware calculation feature refer to the Peripheral + * CRC hardware Calculation subsection. + * + * + * It is possible to use SPI in I2S full duplex mode, in this case, each SPI + * peripheral is able to manage sending and receiving data simultaneously + * using two data lines. Each SPI peripheral has an extended block called I2Sxext + * (ie. I2S2ext for SPI2 and I2S3ext for SPI3). + * The extension block is not a full SPI IP, it is used only as I2S slave to + * implement full duplex mode. The extension block uses the same clock sources + * as its master. + * To configure I2S full duplex you have to: + * + * 1. Configure SPIx in I2S mode (I2S_Init() function) as described above. + * + * 2. Call the I2S_FullDuplexConfig() function using the same strucutre passed to + * I2S_Init() function. + * + * 3. Call I2S_Cmd() for SPIx then for its extended block. + * + * 4. To configure interrupts or DMA requests and to get/clear flag status, + * use I2Sxext instance for the extension block. + * + * Functions that can be called with I2Sxext instances are: + * I2S_Cmd(), I2S_FullDuplexConfig(), SPI_I2S_ReceiveData(), SPI_I2S_SendData(), + * SPI_I2S_DMACmd(), SPI_I2S_ITConfig(), SPI_I2S_GetFlagStatus(), SPI_I2S_ClearFlag(), + * SPI_I2S_GetITStatus() and SPI_I2S_ClearITPendingBit(). + * + * Example: To use SPI3 in Full duplex mode (SPI3 is Master Tx, I2S3ext is Slave Rx): + * + * RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI3, ENABLE); + * I2S_StructInit(&I2SInitStruct); + * I2SInitStruct.Mode = I2S_Mode_MasterTx; + * I2S_Init(SPI3, &I2SInitStruct); + * I2S_FullDuplexConfig(SPI3ext, &I2SInitStruct) + * I2S_Cmd(SPI3, ENABLE); + * I2S_Cmd(SPI3ext, ENABLE); + * ... + * while (SPI_I2S_GetFlagStatus(SPI2, SPI_FLAG_TXE) == RESET) + * {} + * SPI_I2S_SendData(SPI3, txdata[i]); + * ... + * while (SPI_I2S_GetFlagStatus(I2S3ext, SPI_FLAG_RXNE) == RESET) + * {} + * rxdata[i] = SPI_I2S_ReceiveData(I2S3ext); + * ... + * + * + * @note In I2S mode: if an external clock is used as source clock for the I2S, + * then the define I2S_EXTERNAL_CLOCK_VAL in file stm32f4xx_conf.h should + * be enabled and set to the value of the source clock frequency (in Hz). + * + * @note In SPI mode: To use the SPI TI mode, call the function SPI_TIModeCmd() + * just after calling the function SPI_Init(). + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_spi.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup SPI + * @brief SPI driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* SPI registers Masks */ +#define CR1_CLEAR_MASK ((uint16_t)0x3040) +#define I2SCFGR_CLEAR_MASK ((uint16_t)0xF040) + +/* RCC PLLs masks */ +#define PLLCFGR_PPLR_MASK ((uint32_t)0x70000000) +#define PLLCFGR_PPLN_MASK ((uint32_t)0x00007FC0) + +#define SPI_CR2_FRF ((uint16_t)0x0010) +#define SPI_SR_TIFRFE ((uint16_t)0x0100) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SPI_Private_Functions + * @{ + */ + +/** @defgroup SPI_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + + This section provides a set of functions allowing to initialize the SPI Direction, + SPI Mode, SPI Data Size, SPI Polarity, SPI Phase, SPI NSS Management, SPI Baud + Rate Prescaler, SPI First Bit and SPI CRC Polynomial. + + The SPI_Init() function follows the SPI configuration procedures for Master mode + and Slave mode (details for these procedures are available in reference manual + (RM0090)). + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the SPIx peripheral registers to their default reset values. + * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 + * in SPI mode or 2 or 3 in I2S mode. + * + * @note The extended I2S blocks (ie. I2S2ext and I2S3ext blocks) are deinitialized + * when the relative I2S peripheral is deinitialized (the extended block's clock + * is managed by the I2S peripheral clock). + * + * @retval None + */ +void SPI_I2S_DeInit(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + if (SPIx == SPI1) + { + /* Enable SPI1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); + /* Release SPI1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); + } + else if (SPIx == SPI2) + { + /* Enable SPI2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); + /* Release SPI2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); + } + else + { + if (SPIx == SPI3) + { + /* Enable SPI3 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); + /* Release SPI3 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); + } + } +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the SPI_InitStruct. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral. + * @retval None + */ +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) +{ + uint16_t tmpreg = 0; + + /* check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Check the SPI parameters */ + assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); + assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); + assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); + assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); + assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); + assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); + assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); + +/*---------------------------- SPIx CR1 Configuration ------------------------*/ + /* Get the SPIx CR1 value */ + tmpreg = SPIx->CR1; + /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ + tmpreg &= CR1_CLEAR_MASK; + /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler + master/salve mode, CPOL and CPHA */ + /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ + /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ + /* Set LSBFirst bit according to SPI_FirstBit value */ + /* Set BR bits according to SPI_BaudRatePrescaler value */ + /* Set CPOL bit according to SPI_CPOL value */ + /* Set CPHA bit according to SPI_CPHA value */ + tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | + SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | + SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | + SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); + /* Write to SPIx CR1 */ + SPIx->CR1 = tmpreg; + + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + SPIx->I2SCFGR &= (uint16_t)~((uint16_t)SPI_I2SCFGR_I2SMOD); +/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ + /* Write to SPIx CRCPOLY */ + SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the I2S_InitStruct. + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral (configured in I2S mode). + * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral + * configured in I2S mode. + * + * @note The function calculates the optimal prescaler needed to obtain the most + * accurate audio frequency (depending on the I2S clock source, the PLL values + * and the product configuration). But in case the prescaler value is greater + * than 511, the default value (0x02) will be configured instead. + * + * @note if an external clock is used as source clock for the I2S, then the define + * I2S_EXTERNAL_CLOCK_VAL in file stm32f4xx_conf.h should be enabled and set + * to the value of the the source clock frequency (in Hz). + * + * @retval None + */ +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) +{ + uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; + uint32_t tmp = 0, i2sclk = 0; +#ifndef I2S_EXTERNAL_CLOCK_VAL + uint32_t pllm = 0, plln = 0, pllr = 0; +#endif /* I2S_EXTERNAL_CLOCK_VAL */ + + /* Check the I2S parameters */ + assert_param(IS_SPI_23_PERIPH(SPIx)); + assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); + assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); + assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); + assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); + +/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + SPIx->I2SCFGR &= I2SCFGR_CLEAR_MASK; + SPIx->I2SPR = 0x0002; + + /* Get the I2SCFGR register value */ + tmpreg = SPIx->I2SCFGR; + + /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ + if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) + { + i2sodd = (uint16_t)0; + i2sdiv = (uint16_t)2; + } + /* If the requested audio frequency is not the default, compute the prescaler */ + else + { + /* Check the frame length (For the Prescaler computing) *******************/ + if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) + { + /* Packet length is 16 bits */ + packetlength = 1; + } + else + { + /* Packet length is 32 bits */ + packetlength = 2; + } + + /* Get I2S source Clock frequency ****************************************/ + + /* If an external I2S clock has to be used, this define should be set + in the project configuration or in the stm32f4xx_conf.h file */ + #ifdef I2S_EXTERNAL_CLOCK_VAL + /* Set external clock as I2S clock source */ + if ((RCC->CFGR & RCC_CFGR_I2SSRC) == 0) + { + RCC->CFGR |= (uint32_t)RCC_CFGR_I2SSRC; + } + + /* Set the I2S clock to the external clock value */ + i2sclk = I2S_EXTERNAL_CLOCK_VAL; + + #else /* There is no define for External I2S clock source */ + /* Set PLLI2S as I2S clock source */ + if ((RCC->CFGR & RCC_CFGR_I2SSRC) != 0) + { + RCC->CFGR &= ~(uint32_t)RCC_CFGR_I2SSRC; + } + + /* Get the PLLI2SN value */ + plln = (uint32_t)(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6) & \ + (RCC_PLLI2SCFGR_PLLI2SN >> 6)); + + /* Get the PLLI2SR value */ + pllr = (uint32_t)(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28) & \ + (RCC_PLLI2SCFGR_PLLI2SR >> 28)); + + /* Get the PLLM value */ + pllm = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM); + + /* Get the I2S source clock value */ + i2sclk = (uint32_t)(((HSE_VALUE / pllm) * plln) / pllr); + #endif /* I2S_EXTERNAL_CLOCK_VAL */ + + /* Compute the Real divider depending on the MCLK output state, with a floating point */ + if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) + { + /* MCLK output is enabled */ + tmp = (uint16_t)(((((i2sclk / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + else + { + /* MCLK output is disabled */ + tmp = (uint16_t)(((((i2sclk / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + + /* Remove the flatting point */ + tmp = tmp / 10; + + /* Check the parity of the divider */ + i2sodd = (uint16_t)(tmp & (uint16_t)0x0001); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint16_t)((tmp - i2sodd) / 2); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint16_t) (i2sodd << 8); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2) || (i2sdiv > 0xFF)) + { + /* Set the default values */ + i2sdiv = 2; + i2sodd = 0; + } + + /* Write to SPIx I2SPR register the computed value */ + SPIx->I2SPR = (uint16_t)((uint16_t)i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); + + /* Configure the I2S with the SPI_InitStruct values */ + tmpreg |= (uint16_t)((uint16_t)SPI_I2SCFGR_I2SMOD | (uint16_t)(I2S_InitStruct->I2S_Mode | \ + (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ + (uint16_t)I2S_InitStruct->I2S_CPOL)))); + + /* Write to SPIx I2SCFGR */ + SPIx->I2SCFGR = tmpreg; +} + +/** + * @brief Fills each SPI_InitStruct member with its default value. + * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure which will be initialized. + * @retval None + */ +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) +{ +/*--------------- Reset SPI init structure parameters values -----------------*/ + /* Initialize the SPI_Direction member */ + SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; + /* initialize the SPI_Mode member */ + SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; + /* initialize the SPI_DataSize member */ + SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; + /* Initialize the SPI_CPOL member */ + SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; + /* Initialize the SPI_CPHA member */ + SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; + /* Initialize the SPI_NSS member */ + SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; + /* Initialize the SPI_BaudRatePrescaler member */ + SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; + /* Initialize the SPI_FirstBit member */ + SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; + /* Initialize the SPI_CRCPolynomial member */ + SPI_InitStruct->SPI_CRCPolynomial = 7; +} + +/** + * @brief Fills each I2S_InitStruct member with its default value. + * @param I2S_InitStruct: pointer to a I2S_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) +{ +/*--------------- Reset I2S init structure parameters values -----------------*/ + /* Initialize the I2S_Mode member */ + I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; + + /* Initialize the I2S_Standard member */ + I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; + + /* Initialize the I2S_DataFormat member */ + I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; + + /* Initialize the I2S_MCLKOutput member */ + I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; + + /* Initialize the I2S_AudioFreq member */ + I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; + + /* Initialize the I2S_CPOL member */ + I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; +} + +/** + * @brief Enables or disables the specified SPI peripheral. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral */ + SPIx->CR1 |= SPI_CR1_SPE; + } + else + { + /* Disable the selected SPI peripheral */ + SPIx->CR1 &= (uint16_t)~((uint16_t)SPI_CR1_SPE); + } +} + +/** + * @brief Enables or disables the specified SPI peripheral (in I2S mode). + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral (or I2Sxext + * for full duplex mode). + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_23_PERIPH_EXT(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral (in I2S mode) */ + SPIx->I2SCFGR |= SPI_I2SCFGR_I2SE; + } + else + { + /* Disable the selected SPI peripheral in I2S mode */ + SPIx->I2SCFGR &= (uint16_t)~((uint16_t)SPI_I2SCFGR_I2SE); + } +} + +/** + * @brief Configures the data size for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_DataSize: specifies the SPI data size. + * This parameter can be one of the following values: + * @arg SPI_DataSize_16b: Set data frame format to 16bit + * @arg SPI_DataSize_8b: Set data frame format to 8bit + * @retval None + */ +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DATASIZE(SPI_DataSize)); + /* Clear DFF bit */ + SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b; + /* Set new DFF bit value */ + SPIx->CR1 |= SPI_DataSize; +} + +/** + * @brief Selects the data transfer direction in bidirectional mode for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_Direction: specifies the data transfer direction in bidirectional mode. + * This parameter can be one of the following values: + * @arg SPI_Direction_Tx: Selects Tx transmission direction + * @arg SPI_Direction_Rx: Selects Rx receive direction + * @retval None + */ +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DIRECTION(SPI_Direction)); + if (SPI_Direction == SPI_Direction_Tx) + { + /* Set the Tx only mode */ + SPIx->CR1 |= SPI_Direction_Tx; + } + else + { + /* Set the Rx only mode */ + SPIx->CR1 &= SPI_Direction_Rx; + } +} + +/** + * @brief Configures internally by software the NSS pin for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state. + * This parameter can be one of the following values: + * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally + * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally + * @retval None + */ +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); + if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) + { + /* Set NSS pin internally by software */ + SPIx->CR1 |= SPI_NSSInternalSoft_Set; + } + else + { + /* Reset NSS pin internally by software */ + SPIx->CR1 &= SPI_NSSInternalSoft_Reset; + } +} + +/** + * @brief Enables or disables the SS output for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx SS output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI SS output */ + SPIx->CR2 |= (uint16_t)SPI_CR2_SSOE; + } + else + { + /* Disable the selected SPI SS output */ + SPIx->CR2 &= (uint16_t)~((uint16_t)SPI_CR2_SSOE); + } +} + +/** + * @brief Enables or disables the SPIx/I2Sx DMA interface. + * + * @note This function can be called only after the SPI_Init() function has + * been called. + * @note When TI mode is selected, the control bits SSM, SSI, CPOL and CPHA + * are not taken into consideration and are configured by hardware + * respectively to the TI mode requirements. + * + * @param SPIx: where x can be 1, 2 or 3 + * @param NewState: new state of the selected SPI TI communication mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_TIModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the TI mode for the selected SPI peripheral */ + SPIx->CR2 |= SPI_CR2_FRF; + } + else + { + /* Disable the TI mode for the selected SPI peripheral */ + SPIx->CR2 &= (uint16_t)~SPI_CR2_FRF; + } +} + +/** + * @brief Configures the full duplex mode for the I2Sx peripheral using its + * extension I2Sxext according to the specified parameters in the + * I2S_InitStruct. + * @param I2Sxext: where x can be 2 or 3 to select the I2S peripheral extension block. + * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that + * contains the configuration information for the specified I2S peripheral + * extension. + * + * @note The structure pointed by I2S_InitStruct parameter should be the same + * used for the master I2S peripheral. In this case, if the master is + * configured as transmitter, the slave will be receiver and vice versa. + * Or you can force a different mode by modifying the field I2S_Mode to the + * value I2S_SlaveRx or I2S_SlaveTx indepedently of the master configuration. + * + * @note The I2S full duplex extension can be configured in slave mode only. + * + * @retval None + */ +void I2S_FullDuplexConfig(SPI_TypeDef* I2Sxext, I2S_InitTypeDef* I2S_InitStruct) +{ + uint16_t tmpreg = 0, tmp = 0; + + /* Check the I2S parameters */ + assert_param(IS_I2S_EXT_PERIPH(I2Sxext)); + assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); + assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); + assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); + assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); + +/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + I2Sxext->I2SCFGR &= I2SCFGR_CLEAR_MASK; + I2Sxext->I2SPR = 0x0002; + + /* Get the I2SCFGR register value */ + tmpreg = I2Sxext->I2SCFGR; + + /* Get the mode to be configured for the extended I2S */ + if ((I2S_InitStruct->I2S_Mode == I2S_Mode_MasterTx) || (I2S_InitStruct->I2S_Mode == I2S_Mode_SlaveTx)) + { + tmp = I2S_Mode_SlaveRx; + } + else + { + if ((I2S_InitStruct->I2S_Mode == I2S_Mode_MasterRx) || (I2S_InitStruct->I2S_Mode == I2S_Mode_SlaveRx)) + { + tmp = I2S_Mode_SlaveTx; + } + } + + + /* Configure the I2S with the SPI_InitStruct values */ + tmpreg |= (uint16_t)((uint16_t)SPI_I2SCFGR_I2SMOD | (uint16_t)(tmp | \ + (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ + (uint16_t)I2S_InitStruct->I2S_CPOL)))); + + /* Write to SPIx I2SCFGR */ + I2Sxext->I2SCFGR = tmpreg; +} + +/** + * @} + */ + +/** @defgroup SPI_Group2 Data transfers functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + Data transfers functions + =============================================================================== + + This section provides a set of functions allowing to manage the SPI data transfers + + In reception, data are received and then stored into an internal Rx buffer while + In transmission, data are first stored into an internal Tx buffer before being + transmitted. + + The read access of the SPI_DR register can be done using the SPI_I2S_ReceiveData() + function and returns the Rx buffered value. Whereas a write access to the SPI_DR + can be done using SPI_I2S_SendData() function and stores the written data into + Tx buffer. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. + * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 + * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. + * @retval The value of the received data. + */ +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); + + /* Return the data in the DR register */ + return SPIx->DR; +} + +/** + * @brief Transmits a Data through the SPIx/I2Sx peripheral. + * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 + * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. + * @param Data: Data to be transmitted. + * @retval None + */ +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); + + /* Write in the DR register the data to be sent */ + SPIx->DR = Data; +} + +/** + * @} + */ + +/** @defgroup SPI_Group3 Hardware CRC Calculation functions + * @brief Hardware CRC Calculation functions + * +@verbatim + =============================================================================== + Hardware CRC Calculation functions + =============================================================================== + + This section provides a set of functions allowing to manage the SPI CRC hardware + calculation + + SPI communication using CRC is possible through the following procedure: + 1. Program the Data direction, Polarity, Phase, First Data, Baud Rate Prescaler, + Slave Management, Peripheral Mode and CRC Polynomial values using the SPI_Init() + function. + 2. Enable the CRC calculation using the SPI_CalculateCRC() function. + 3. Enable the SPI using the SPI_Cmd() function + 4. Before writing the last data to the TX buffer, set the CRCNext bit using the + SPI_TransmitCRC() function to indicate that after transmission of the last + data, the CRC should be transmitted. + 5. After transmitting the last data, the SPI transmits the CRC. The SPI_CR1_CRCNEXT + bit is reset. The CRC is also received and compared against the SPI_RXCRCR + value. + If the value does not match, the SPI_FLAG_CRCERR flag is set and an interrupt + can be generated when the SPI_I2S_IT_ERR interrupt is enabled. + +@note It is advised not to read the calculated CRC values during the communication. + +@note When the SPI is in slave mode, be careful to enable CRC calculation only + when the clock is stable, that is, when the clock is in the steady state. + If not, a wrong CRC calculation may be done. In fact, the CRC is sensitive + to the SCK slave input clock as soon as CRCEN is set, and this, whatever + the value of the SPE bit. + +@note With high bitrate frequencies, be careful when transmitting the CRC. + As the number of used CPU cycles has to be as low as possible in the CRC + transfer phase, it is forbidden to call software functions in the CRC + transmission sequence to avoid errors in the last data and CRC reception. + In fact, CRCNEXT bit has to be written before the end of the transmission/reception + of the last data. + +@note For high bit rate frequencies, it is advised to use the DMA mode to avoid the + degradation of the SPI speed performance due to CPU accesses impacting the + SPI bandwidth. + +@note When the STM32F4xx is configured as slave and the NSS hardware mode is + used, the NSS pin needs to be kept low between the data phase and the CRC + phase. + +@note When the SPI is configured in slave mode with the CRC feature enabled, CRC + calculation takes place even if a high level is applied on the NSS pin. + This may happen for example in case of a multi-slave environment where the + communication master addresses slaves alternately. + +@note Between a slave de-selection (high level on NSS) and a new slave selection + (low level on NSS), the CRC value should be cleared on both master and slave + sides in order to resynchronize the master and slave for their respective + CRC calculation. + +@note To clear the CRC, follow the procedure below: + 1. Disable SPI using the SPI_Cmd() function + 2. Disable the CRC calculation using the SPI_CalculateCRC() function. + 3. Enable the CRC calculation using the SPI_CalculateCRC() function. + 4. Enable SPI using the SPI_Cmd() function. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the CRC value calculation of the transferred bytes. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx CRC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI CRC calculation */ + SPIx->CR1 |= SPI_CR1_CRCEN; + } + else + { + /* Disable the selected SPI CRC calculation */ + SPIx->CR1 &= (uint16_t)~((uint16_t)SPI_CR1_CRCEN); + } +} + +/** + * @brief Transmit the SPIx CRC value. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval None + */ +void SPI_TransmitCRC(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Enable the selected SPI CRC transmission */ + SPIx->CR1 |= SPI_CR1_CRCNEXT; +} + +/** + * @brief Returns the transmit or the receive CRC register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_CRC: specifies the CRC register to be read. + * This parameter can be one of the following values: + * @arg SPI_CRC_Tx: Selects Tx CRC register + * @arg SPI_CRC_Rx: Selects Rx CRC register + * @retval The selected CRC register value.. + */ +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC) +{ + uint16_t crcreg = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_CRC(SPI_CRC)); + if (SPI_CRC != SPI_CRC_Rx) + { + /* Get the Tx CRC register */ + crcreg = SPIx->TXCRCR; + } + else + { + /* Get the Rx CRC register */ + crcreg = SPIx->RXCRCR; + } + /* Return the selected CRC register */ + return crcreg; +} + +/** + * @brief Returns the CRC Polynomial register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval The CRC Polynomial register value. + */ +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the CRC polynomial register */ + return SPIx->CRCPR; +} + +/** + * @} + */ + +/** @defgroup SPI_Group4 DMA transfers management functions + * @brief DMA transfers management functions + * +@verbatim + =============================================================================== + DMA transfers management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the SPIx/I2Sx DMA interface. + * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 + * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. + * @param SPI_I2S_DMAReq: specifies the SPI DMA transfer request to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request + * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request + * @param NewState: new state of the selected SPI DMA transfer request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); + + if (NewState != DISABLE) + { + /* Enable the selected SPI DMA requests */ + SPIx->CR2 |= SPI_I2S_DMAReq; + } + else + { + /* Disable the selected SPI DMA requests */ + SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq; + } +} + +/** + * @} + */ + +/** @defgroup SPI_Group5 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + + This section provides a set of functions allowing to configure the SPI Interrupts + sources and check or clear the flags or pending bits status. + The user should identify which mode will be used in his application to manage + the communication: Polling mode, Interrupt mode or DMA mode. + + Polling Mode + ============= + In Polling Mode, the SPI/I2S communication can be managed by 9 flags: + 1. SPI_I2S_FLAG_TXE : to indicate the status of the transmit buffer register + 2. SPI_I2S_FLAG_RXNE : to indicate the status of the receive buffer register + 3. SPI_I2S_FLAG_BSY : to indicate the state of the communication layer of the SPI. + 4. SPI_FLAG_CRCERR : to indicate if a CRC Calculation error occur + 5. SPI_FLAG_MODF : to indicate if a Mode Fault error occur + 6. SPI_I2S_FLAG_OVR : to indicate if an Overrun error occur + 7. I2S_FLAG_TIFRFE: to indicate a Frame Format error occurs. + 8. I2S_FLAG_UDR: to indicate an Underrun error occurs. + 9. I2S_FLAG_CHSIDE: to indicate Channel Side. + +@note Do not use the BSY flag to handle each data transmission or reception. It is + better to use the TXE and RXNE flags instead. + + In this Mode it is advised to use the following functions: + - FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); + - void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); + + Interrupt Mode + =============== + In Interrupt Mode, the SPI communication can be managed by 3 interrupt sources + and 7 pending bits: + Pending Bits: + ------------- + 1. SPI_I2S_IT_TXE : to indicate the status of the transmit buffer register + 2. SPI_I2S_IT_RXNE : to indicate the status of the receive buffer register + 3. SPI_IT_CRCERR : to indicate if a CRC Calculation error occur (available in SPI mode only) + 4. SPI_IT_MODF : to indicate if a Mode Fault error occur (available in SPI mode only) + 5. SPI_I2S_IT_OVR : to indicate if an Overrun error occur + 6. I2S_IT_UDR : to indicate an Underrun Error occurs (available in I2S mode only). + 7. I2S_FLAG_TIFRFE : to indicate a Frame Format error occurs (available in TI mode only). + + Interrupt Source: + ----------------- + 1. SPI_I2S_IT_TXE: specifies the interrupt source for the Tx buffer empty + interrupt. + 2. SPI_I2S_IT_RXNE : specifies the interrupt source for the Rx buffer not + empty interrupt. + 3. SPI_I2S_IT_ERR : specifies the interrupt source for the errors interrupt. + + In this Mode it is advised to use the following functions: + - void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); + - ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + - void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + + DMA Mode + ======== + In DMA Mode, the SPI communication can be managed by 2 DMA Channel requests: + 1. SPI_I2S_DMAReq_Tx: specifies the Tx buffer DMA transfer request + 2. SPI_I2S_DMAReq_Rx: specifies the Rx buffer DMA transfer request + + In this Mode it is advised to use the following function: + - void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified SPI/I2S interrupts. + * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 + * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. + * @param SPI_I2S_IT: specifies the SPI interrupt source to be enabled or disabled. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask + * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask + * @arg SPI_I2S_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified SPI interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) +{ + uint16_t itpos = 0, itmask = 0 ; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); + + /* Get the SPI IT index */ + itpos = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = (uint16_t)1 << (uint16_t)itpos; + + if (NewState != DISABLE) + { + /* Enable the selected SPI interrupt */ + SPIx->CR2 |= itmask; + } + else + { + /* Disable the selected SPI interrupt */ + SPIx->CR2 &= (uint16_t)~itmask; + } +} + +/** + * @brief Checks whether the specified SPIx/I2Sx flag is set or not. + * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 + * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. + * @param SPI_I2S_FLAG: specifies the SPI flag to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag. + * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. + * @arg SPI_I2S_FLAG_BSY: Busy flag. + * @arg SPI_I2S_FLAG_OVR: Overrun flag. + * @arg SPI_FLAG_MODF: Mode Fault flag. + * @arg SPI_FLAG_CRCERR: CRC Error flag. + * @arg SPI_I2S_FLAG_TIFRFE: Format Error. + * @arg I2S_FLAG_UDR: Underrun Error flag. + * @arg I2S_FLAG_CHSIDE: Channel Side flag. + * @retval The new state of SPI_I2S_FLAG (SET or RESET). + */ +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); + assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); + + /* Check the status of the specified SPI flag */ + if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET) + { + /* SPI_I2S_FLAG is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_FLAG is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) flag. + * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 + * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. + * @param SPI_I2S_FLAG: specifies the SPI flag to clear. + * This function clears only CRCERR flag. + * @arg SPI_FLAG_CRCERR: CRC Error flag. + * + * @note OVR (OverRun error) flag is cleared by software sequence: a read + * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()). + * @note UDR (UnderRun error) flag is cleared by a read operation to + * SPI_SR register (SPI_I2S_GetFlagStatus()). + * @note MODF (Mode Fault) flag is cleared by software sequence: a read/write + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a + * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI). + * + * @retval None + */ +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); + + /* Clear the selected SPI CRC Error (CRCERR) flag */ + SPIx->SR = (uint16_t)~SPI_I2S_FLAG; +} + +/** + * @brief Checks whether the specified SPIx/I2Sx interrupt has occurred or not. + * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 + * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. + * @param SPI_I2S_IT: specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt. + * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. + * @arg SPI_I2S_IT_OVR: Overrun interrupt. + * @arg SPI_IT_MODF: Mode Fault interrupt. + * @arg SPI_IT_CRCERR: CRC Error interrupt. + * @arg I2S_IT_UDR: Underrun interrupt. + * @arg SPI_I2S_IT_TIFRFE: Format Error interrupt. + * @retval The new state of SPI_I2S_IT (SET or RESET). + */ +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itpos = 0, itmask = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); + assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); + + /* Get the SPI_I2S_IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Get the SPI_I2S_IT IT mask */ + itmask = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = 0x01 << itmask; + + /* Get the SPI_I2S_IT enable bit status */ + enablestatus = (SPIx->CR2 & itmask) ; + + /* Check the status of the specified SPI interrupt */ + if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus) + { + /* SPI_I2S_IT is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_IT is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_IT status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit. + * @param SPIx: To select the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 + * in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode. + * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear. + * This function clears only CRCERR interrupt pending bit. + * @arg SPI_IT_CRCERR: CRC Error interrupt. + * + * @note OVR (OverRun Error) interrupt pending bit is cleared by software + * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData()) + * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()). + * @note UDR (UnderRun Error) interrupt pending bit is cleared by a read + * operation to SPI_SR register (SPI_I2S_GetITStatus()). + * @note MODF (Mode Fault) interrupt pending bit is cleared by software sequence: + * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus()) + * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable + * the SPI). + * @retval None + */ +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + uint16_t itpos = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH_EXT(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); + + /* Get the SPI_I2S IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */ + SPIx->SR = (uint16_t)~itpos; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.h new file mode 100644 index 00000000000..095b63a1f2e --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_spi.h @@ -0,0 +1,537 @@ +/** + ****************************************************************************** + * @file stm32f4xx_spi.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the SPI + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_SPI_H +#define __STM32F4xx_SPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief SPI Init structure definition + */ + +typedef struct +{ + uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_data_direction */ + + uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_mode */ + + uint16_t SPI_DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ +}SPI_InitTypeDef; + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + + uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +}I2S_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SPI_Exported_Constants + * @{ + */ + +#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ + ((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +#define IS_SPI_ALL_PERIPH_EXT(PERIPH) (((PERIPH) == SPI1) || \ + ((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3) || \ + ((PERIPH) == I2S2ext) || \ + ((PERIPH) == I2S3ext)) + +#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +#define IS_SPI_23_PERIPH_EXT(PERIPH) (((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3) || \ + ((PERIPH) == I2S2ext) || \ + ((PERIPH) == I2S3ext)) + +#define IS_I2S_EXT_PERIPH(PERIPH) (((PERIPH) == I2S2ext) || \ + ((PERIPH) == I2S3ext)) + + +/** @defgroup SPI_data_direction + * @{ + */ + +#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) +#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) +#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) +#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) +#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ + ((MODE) == SPI_Direction_2Lines_RxOnly) || \ + ((MODE) == SPI_Direction_1Line_Rx) || \ + ((MODE) == SPI_Direction_1Line_Tx)) +/** + * @} + */ + +/** @defgroup SPI_mode + * @{ + */ + +#define SPI_Mode_Master ((uint16_t)0x0104) +#define SPI_Mode_Slave ((uint16_t)0x0000) +#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ + ((MODE) == SPI_Mode_Slave)) +/** + * @} + */ + +/** @defgroup SPI_data_size + * @{ + */ + +#define SPI_DataSize_16b ((uint16_t)0x0800) +#define SPI_DataSize_8b ((uint16_t)0x0000) +#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ + ((DATASIZE) == SPI_DataSize_8b)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity + * @{ + */ + +#define SPI_CPOL_Low ((uint16_t)0x0000) +#define SPI_CPOL_High ((uint16_t)0x0002) +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ + ((CPOL) == SPI_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase + * @{ + */ + +#define SPI_CPHA_1Edge ((uint16_t)0x0000) +#define SPI_CPHA_2Edge ((uint16_t)0x0001) +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ + ((CPHA) == SPI_CPHA_2Edge)) +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management + * @{ + */ + +#define SPI_NSS_Soft ((uint16_t)0x0200) +#define SPI_NSS_Hard ((uint16_t)0x0000) +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ + ((NSS) == SPI_NSS_Hard)) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler + * @{ + */ + +#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) +#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) +#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) +#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) +#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) +#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) +#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) +#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_256)) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission + * @{ + */ + +#define SPI_FirstBit_MSB ((uint16_t)0x0000) +#define SPI_FirstBit_LSB ((uint16_t)0x0080) +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ + ((BIT) == SPI_FirstBit_LSB)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Mode + * @{ + */ + +#define I2S_Mode_SlaveTx ((uint16_t)0x0000) +#define I2S_Mode_SlaveRx ((uint16_t)0x0100) +#define I2S_Mode_MasterTx ((uint16_t)0x0200) +#define I2S_Mode_MasterRx ((uint16_t)0x0300) +#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ + ((MODE) == I2S_Mode_SlaveRx) || \ + ((MODE) == I2S_Mode_MasterTx)|| \ + ((MODE) == I2S_Mode_MasterRx)) +/** + * @} + */ + + +/** @defgroup SPI_I2S_Standard + * @{ + */ + +#define I2S_Standard_Phillips ((uint16_t)0x0000) +#define I2S_Standard_MSB ((uint16_t)0x0010) +#define I2S_Standard_LSB ((uint16_t)0x0020) +#define I2S_Standard_PCMShort ((uint16_t)0x0030) +#define I2S_Standard_PCMLong ((uint16_t)0x00B0) +#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ + ((STANDARD) == I2S_Standard_MSB) || \ + ((STANDARD) == I2S_Standard_LSB) || \ + ((STANDARD) == I2S_Standard_PCMShort) || \ + ((STANDARD) == I2S_Standard_PCMLong)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Data_Format + * @{ + */ + +#define I2S_DataFormat_16b ((uint16_t)0x0000) +#define I2S_DataFormat_16bextended ((uint16_t)0x0001) +#define I2S_DataFormat_24b ((uint16_t)0x0003) +#define I2S_DataFormat_32b ((uint16_t)0x0005) +#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ + ((FORMAT) == I2S_DataFormat_16bextended) || \ + ((FORMAT) == I2S_DataFormat_24b) || \ + ((FORMAT) == I2S_DataFormat_32b)) +/** + * @} + */ + +/** @defgroup SPI_I2S_MCLK_Output + * @{ + */ + +#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) +#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) +#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ + ((OUTPUT) == I2S_MCLKOutput_Disable)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Audio_Frequency + * @{ + */ + +#define I2S_AudioFreq_192k ((uint32_t)192000) +#define I2S_AudioFreq_96k ((uint32_t)96000) +#define I2S_AudioFreq_48k ((uint32_t)48000) +#define I2S_AudioFreq_44k ((uint32_t)44100) +#define I2S_AudioFreq_32k ((uint32_t)32000) +#define I2S_AudioFreq_22k ((uint32_t)22050) +#define I2S_AudioFreq_16k ((uint32_t)16000) +#define I2S_AudioFreq_11k ((uint32_t)11025) +#define I2S_AudioFreq_8k ((uint32_t)8000) +#define I2S_AudioFreq_Default ((uint32_t)2) + +#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ + ((FREQ) <= I2S_AudioFreq_192k)) || \ + ((FREQ) == I2S_AudioFreq_Default)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Clock_Polarity + * @{ + */ + +#define I2S_CPOL_Low ((uint16_t)0x0000) +#define I2S_CPOL_High ((uint16_t)0x0008) +#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ + ((CPOL) == I2S_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_I2S_DMA_transfer_requests + * @{ + */ + +#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) +#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) +#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) +/** + * @} + */ + +/** @defgroup SPI_NSS_internal_software_management + * @{ + */ + +#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) +#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) +#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ + ((INTERNAL) == SPI_NSSInternalSoft_Reset)) +/** + * @} + */ + +/** @defgroup SPI_CRC_Transmit_Receive + * @{ + */ + +#define SPI_CRC_Tx ((uint8_t)0x00) +#define SPI_CRC_Rx ((uint8_t)0x01) +#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) +/** + * @} + */ + +/** @defgroup SPI_direction_transmit_receive + * @{ + */ + +#define SPI_Direction_Rx ((uint16_t)0xBFFF) +#define SPI_Direction_Tx ((uint16_t)0x4000) +#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ + ((DIRECTION) == SPI_Direction_Tx)) +/** + * @} + */ + +/** @defgroup SPI_I2S_interrupts_definition + * @{ + */ + +#define SPI_I2S_IT_TXE ((uint8_t)0x71) +#define SPI_I2S_IT_RXNE ((uint8_t)0x60) +#define SPI_I2S_IT_ERR ((uint8_t)0x50) +#define I2S_IT_UDR ((uint8_t)0x53) +#define SPI_I2S_IT_TIFRFE ((uint8_t)0x58) + +#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_I2S_IT_RXNE) || \ + ((IT) == SPI_I2S_IT_ERR)) + +#define SPI_I2S_IT_OVR ((uint8_t)0x56) +#define SPI_IT_MODF ((uint8_t)0x55) +#define SPI_IT_CRCERR ((uint8_t)0x54) + +#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) + +#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE)|| ((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_IT_CRCERR) || ((IT) == SPI_IT_MODF) || \ + ((IT) == SPI_I2S_IT_OVR) || ((IT) == I2S_IT_UDR) ||\ + ((IT) == SPI_I2S_IT_TIFRFE)) +/** + * @} + */ + +/** @defgroup SPI_I2S_flags_definition + * @{ + */ + +#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) +#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) +#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) +#define I2S_FLAG_UDR ((uint16_t)0x0008) +#define SPI_FLAG_CRCERR ((uint16_t)0x0010) +#define SPI_FLAG_MODF ((uint16_t)0x0020) +#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) +#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) +#define SPI_I2S_FLAG_TIFRFE ((uint16_t)0x0100) + +#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) +#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ + ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ + ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ + ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)|| \ + ((FLAG) == SPI_I2S_FLAG_TIFRFE)) +/** + * @} + */ + +/** @defgroup SPI_CRC_polynomial + * @{ + */ + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) +/** + * @} + */ + +/** @defgroup SPI_I2S_Legacy + * @{ + */ + +#define SPI_DMAReq_Tx SPI_I2S_DMAReq_Tx +#define SPI_DMAReq_Rx SPI_I2S_DMAReq_Rx +#define SPI_IT_TXE SPI_I2S_IT_TXE +#define SPI_IT_RXNE SPI_I2S_IT_RXNE +#define SPI_IT_ERR SPI_I2S_IT_ERR +#define SPI_IT_OVR SPI_I2S_IT_OVR +#define SPI_FLAG_RXNE SPI_I2S_FLAG_RXNE +#define SPI_FLAG_TXE SPI_I2S_FLAG_TXE +#define SPI_FLAG_OVR SPI_I2S_FLAG_OVR +#define SPI_FLAG_BSY SPI_I2S_FLAG_BSY +#define SPI_DeInit SPI_I2S_DeInit +#define SPI_ITConfig SPI_I2S_ITConfig +#define SPI_DMACmd SPI_I2S_DMACmd +#define SPI_SendData SPI_I2S_SendData +#define SPI_ReceiveData SPI_I2S_ReceiveData +#define SPI_GetFlagStatus SPI_I2S_GetFlagStatus +#define SPI_ClearFlag SPI_I2S_ClearFlag +#define SPI_GetITStatus SPI_I2S_GetITStatus +#define SPI_ClearITPendingBit SPI_I2S_ClearITPendingBit +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the SPI configuration to the default reset state *****/ +void SPI_I2S_DeInit(SPI_TypeDef* SPIx); + +/* Initialization and Configuration functions *********************************/ +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_TIModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState); + +void I2S_FullDuplexConfig(SPI_TypeDef* I2Sxext, I2S_InitTypeDef* I2S_InitStruct); + +/* Data transfers functions ***************************************************/ +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); + +/* Hardware CRC Calculation functions *****************************************/ +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_TransmitCRC(SPI_TypeDef* SPIx); +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); + +/* DMA transfers management functions *****************************************/ +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_SPI_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_syscfg.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_syscfg.c new file mode 100644 index 00000000000..1773a0e0279 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_syscfg.c @@ -0,0 +1,198 @@ +/** + ****************************************************************************** + * @file stm32f4xx_syscfg.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the SYSCFG peripheral. + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * + * This driver provides functions for: + * + * 1. Remapping the memory accessible in the code area using SYSCFG_MemoryRemapConfig() + * + * 2. Manage the EXTI lines connection to the GPIOs using SYSCFG_EXTILineConfig() + * + * 3. Select the ETHERNET media interface (RMII/RII) using SYSCFG_ETH_MediaInterfaceConfig() + * + * @note SYSCFG APB clock must be enabled to get write access to SYSCFG registers, + * using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_syscfg.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup SYSCFG + * @brief SYSCFG driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* ------------ RCC registers bit address in the alias region ----------- */ +#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE) +/* --- PMC Register ---*/ +/* Alias word address of MII_RMII_SEL bit */ +#define PMC_OFFSET (SYSCFG_OFFSET + 0x04) +#define MII_RMII_SEL_BitNumber ((uint8_t)0x17) +#define PMC_MII_RMII_SEL_BB (PERIPH_BB_BASE + (PMC_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4)) + +/* --- CMPCR Register ---*/ +/* Alias word address of CMP_PD bit */ +#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20) +#define CMP_PD_BitNumber ((uint8_t)0x00) +#define CMPCR_CMP_PD_BB (PERIPH_BB_BASE + (CMPCR_OFFSET * 32) + (CMP_PD_BitNumber * 4)) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SYSCFG_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the Alternate Functions (remap and EXTI configuration) + * registers to their default reset values. + * @param None + * @retval None + */ +void SYSCFG_DeInit(void) +{ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, DISABLE); +} + +/** + * @brief Changes the mapping of the specified pin. + * @param SYSCFG_Memory: selects the memory remapping. + * This parameter can be one of the following values: + * @arg SYSCFG_MemoryRemap_Flash: Main Flash memory mapped at 0x00000000 + * @arg SYSCFG_MemoryRemap_SystemFlash: System Flash memory mapped at 0x00000000 + * @arg SYSCFG_MemoryRemap_FSMC: FSMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 + * @arg SYSCFG_MemoryRemap_SRAM: Embedded SRAM (112kB) mapped at 0x00000000 + * @retval None + */ +void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_MEMORY_REMAP_CONFING(SYSCFG_MemoryRemap)); + + SYSCFG->MEMRMP = SYSCFG_MemoryRemap; +} + +/** + * @brief Selects the GPIO pin used as EXTI Line. + * @param EXTI_PortSourceGPIOx : selects the GPIO port to be used as source for + * EXTI lines where x can be (A..I). + * @param EXTI_PinSourcex: specifies the EXTI line to be configured. + * This parameter can be EXTI_PinSourcex where x can be (0..15, except + * for EXTI_PortSourceGPIOI x can be (0..11). + * @retval None + */ +void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex) +{ + uint32_t tmp = 0x00; + + /* Check the parameters */ + assert_param(IS_EXTI_PORT_SOURCE(EXTI_PortSourceGPIOx)); + assert_param(IS_EXTI_PIN_SOURCE(EXTI_PinSourcex)); + + tmp = ((uint32_t)0x0F) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03)); + SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] &= ~tmp; + SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] |= (((uint32_t)EXTI_PortSourceGPIOx) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03))); +} + +/** + * @brief Selects the ETHERNET media interface + * @param SYSCFG_ETH_MediaInterface: specifies the Media Interface mode. + * This parameter can be one of the following values: + * @arg SYSCFG_ETH_MediaInterface_MII: MII mode selected + * @arg SYSCFG_ETH_MediaInterface_RMII: RMII mode selected + * @retval None + */ +void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface) +{ + assert_param(IS_SYSCFG_ETH_MEDIA_INTERFACE(SYSCFG_ETH_MediaInterface)); + /* Configure MII_RMII selection bit */ + *(__IO uint32_t *) PMC_MII_RMII_SEL_BB = SYSCFG_ETH_MediaInterface; +} + +/** + * @brief Enables or disables the I/O Compensation Cell. + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 2.4 to 3.6 V. + * @param NewState: new state of the I/O Compensation Cell. + * This parameter can be one of the following values: + * @arg ENABLE: I/O compensation cell enabled + * @arg DISABLE: I/O compensation cell power-down mode + * @retval None + */ +void SYSCFG_CompensationCellCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMPCR_CMP_PD_BB = (uint32_t)NewState; +} + +/** + * @brief Checks whether the I/O Compensation Cell ready flag is set or not. + * @param None + * @retval The new state of the I/O Compensation Cell ready flag (SET or RESET) + */ +FlagStatus SYSCFG_GetCompensationCellStatus(void) +{ + FlagStatus bitstatus = RESET; + + if ((SYSCFG->CMPCR & SYSCFG_CMPCR_READY ) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_syscfg.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_syscfg.h new file mode 100644 index 00000000000..98eed9b70de --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_syscfg.h @@ -0,0 +1,173 @@ +/** + ****************************************************************************** + * @file stm32f4xx_syscfg.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the SYSCFG firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_SYSCFG_H +#define __STM32F4xx_SYSCFG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SYSCFG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SYSCFG_Exported_Constants + * @{ + */ + +/** @defgroup SYSCFG_EXTI_Port_Sources + * @{ + */ +#define EXTI_PortSourceGPIOA ((uint8_t)0x00) +#define EXTI_PortSourceGPIOB ((uint8_t)0x01) +#define EXTI_PortSourceGPIOC ((uint8_t)0x02) +#define EXTI_PortSourceGPIOD ((uint8_t)0x03) +#define EXTI_PortSourceGPIOE ((uint8_t)0x04) +#define EXTI_PortSourceGPIOF ((uint8_t)0x05) +#define EXTI_PortSourceGPIOG ((uint8_t)0x06) +#define EXTI_PortSourceGPIOH ((uint8_t)0x07) +#define EXTI_PortSourceGPIOI ((uint8_t)0x08) + +#define IS_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == EXTI_PortSourceGPIOA) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOB) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOC) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOD) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOE) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOF) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOG) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOH) || \ + ((PORTSOURCE) == EXTI_PortSourceGPIOI)) +/** + * @} + */ + + +/** @defgroup SYSCFG_EXTI_Pin_Sources + * @{ + */ +#define EXTI_PinSource0 ((uint8_t)0x00) +#define EXTI_PinSource1 ((uint8_t)0x01) +#define EXTI_PinSource2 ((uint8_t)0x02) +#define EXTI_PinSource3 ((uint8_t)0x03) +#define EXTI_PinSource4 ((uint8_t)0x04) +#define EXTI_PinSource5 ((uint8_t)0x05) +#define EXTI_PinSource6 ((uint8_t)0x06) +#define EXTI_PinSource7 ((uint8_t)0x07) +#define EXTI_PinSource8 ((uint8_t)0x08) +#define EXTI_PinSource9 ((uint8_t)0x09) +#define EXTI_PinSource10 ((uint8_t)0x0A) +#define EXTI_PinSource11 ((uint8_t)0x0B) +#define EXTI_PinSource12 ((uint8_t)0x0C) +#define EXTI_PinSource13 ((uint8_t)0x0D) +#define EXTI_PinSource14 ((uint8_t)0x0E) +#define EXTI_PinSource15 ((uint8_t)0x0F) +#define IS_EXTI_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == EXTI_PinSource0) || \ + ((PINSOURCE) == EXTI_PinSource1) || \ + ((PINSOURCE) == EXTI_PinSource2) || \ + ((PINSOURCE) == EXTI_PinSource3) || \ + ((PINSOURCE) == EXTI_PinSource4) || \ + ((PINSOURCE) == EXTI_PinSource5) || \ + ((PINSOURCE) == EXTI_PinSource6) || \ + ((PINSOURCE) == EXTI_PinSource7) || \ + ((PINSOURCE) == EXTI_PinSource8) || \ + ((PINSOURCE) == EXTI_PinSource9) || \ + ((PINSOURCE) == EXTI_PinSource10) || \ + ((PINSOURCE) == EXTI_PinSource11) || \ + ((PINSOURCE) == EXTI_PinSource12) || \ + ((PINSOURCE) == EXTI_PinSource13) || \ + ((PINSOURCE) == EXTI_PinSource14) || \ + ((PINSOURCE) == EXTI_PinSource15)) +/** + * @} + */ + + +/** @defgroup SYSCFG_Memory_Remap_Config + * @{ + */ +#define SYSCFG_MemoryRemap_Flash ((uint8_t)0x00) +#define SYSCFG_MemoryRemap_SystemFlash ((uint8_t)0x01) +#define SYSCFG_MemoryRemap_FSMC ((uint8_t)0x02) +#define SYSCFG_MemoryRemap_SRAM ((uint8_t)0x03) + +#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \ + ((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \ + ((REMAP) == SYSCFG_MemoryRemap_SRAM) || \ + ((REMAP) == SYSCFG_MemoryRemap_FSMC)) +/** + * @} + */ + + +/** @defgroup SYSCFG_ETHERNET_Media_Interface + * @{ + */ +#define SYSCFG_ETH_MediaInterface_MII ((uint32_t)0x00000000) +#define SYSCFG_ETH_MediaInterface_RMII ((uint32_t)0x00000001) + +#define IS_SYSCFG_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == SYSCFG_ETH_MediaInterface_MII) || \ + ((INTERFACE) == SYSCFG_ETH_MediaInterface_RMII)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +void SYSCFG_DeInit(void); +void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap); +void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex); +void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface); +void SYSCFG_CompensationCellCmd(FunctionalState NewState); +FlagStatus SYSCFG_GetCompensationCellStatus(void); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_SYSCFG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.c new file mode 100644 index 00000000000..8a2f8427f3d --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.c @@ -0,0 +1,3353 @@ +/** + ****************************************************************************** + * @file stm32f4xx_tim.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the TIM peripheral: + * - TimeBase management + * - Output Compare management + * - Input Capture management + * - Advanced-control timers (TIM1 and TIM8) specific features + * - Interrupts, DMA and flags management + * - Clocks management + * - Synchronization management + * - Specific interface management + * - Specific remapping management + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * This driver provides functions to configure and program the TIM + * of all STM32F4xx devices. + * These functions are split in 9 groups: + * + * 1. TIM TimeBase management: this group includes all needed functions + * to configure the TM Timebase unit: + * - Set/Get Prescaler + * - Set/Get Autoreload + * - Counter modes configuration + * - Set Clock division + * - Select the One Pulse mode + * - Update Request Configuration + * - Update Disable Configuration + * - Auto-Preload Configuration + * - Enable/Disable the counter + * + * 2. TIM Output Compare management: this group includes all needed + * functions to configure the Capture/Compare unit used in Output + * compare mode: + * - Configure each channel, independently, in Output Compare mode + * - Select the output compare modes + * - Select the Polarities of each channel + * - Set/Get the Capture/Compare register values + * - Select the Output Compare Fast mode + * - Select the Output Compare Forced mode + * - Output Compare-Preload Configuration + * - Clear Output Compare Reference + * - Select the OCREF Clear signal + * - Enable/Disable the Capture/Compare Channels + * + * 3. TIM Input Capture management: this group includes all needed + * functions to configure the Capture/Compare unit used in + * Input Capture mode: + * - Configure each channel in input capture mode + * - Configure Channel1/2 in PWM Input mode + * - Set the Input Capture Prescaler + * - Get the Capture/Compare values + * + * 4. Advanced-control timers (TIM1 and TIM8) specific features + * - Configures the Break input, dead time, Lock level, the OSSI, + * the OSSR State and the AOE(automatic output enable) + * - Enable/Disable the TIM peripheral Main Outputs + * - Select the Commutation event + * - Set/Reset the Capture Compare Preload Control bit + * + * 5. TIM interrupts, DMA and flags management + * - Enable/Disable interrupt sources + * - Get flags status + * - Clear flags/ Pending bits + * - Enable/Disable DMA requests + * - Configure DMA burst mode + * - Select CaptureCompare DMA request + * + * 6. TIM clocks management: this group includes all needed functions + * to configure the clock controller unit: + * - Select internal/External clock + * - Select the external clock mode: ETR(Mode1/Mode2), TIx or ITRx + * + * 7. TIM synchronization management: this group includes all needed + * functions to configure the Synchronization unit: + * - Select Input Trigger + * - Select Output Trigger + * - Select Master Slave Mode + * - ETR Configuration when used as external trigger + * + * 8. TIM specific interface management, this group includes all + * needed functions to use the specific TIM interface: + * - Encoder Interface Configuration + * - Select Hall Sensor + * + * 9. TIM specific remapping management includes the Remapping + * configuration of specific timers + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_tim.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup TIM + * @brief TIM driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ---------------------- TIM registers bit mask ------------------------ */ +#define SMCR_ETR_MASK ((uint16_t)0x00FF) +#define CCMR_OFFSET ((uint16_t)0x0018) +#define CCER_CCE_SET ((uint16_t)0x0001) +#define CCER_CCNE_SET ((uint16_t)0x0004) +#define CCMR_OC13M_MASK ((uint16_t)0xFF8F) +#define CCMR_OC24M_MASK ((uint16_t)0x8FFF) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup TIM_Private_Functions + * @{ + */ + +/** @defgroup TIM_Group1 TimeBase management functions + * @brief TimeBase management functions + * +@verbatim + =============================================================================== + TimeBase management functions + =============================================================================== + + =================================================================== + TIM Driver: how to use it in Timing(Time base) Mode + =================================================================== + To use the Timer in Timing(Time base) mode, the following steps are mandatory: + + 1. Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function + + 2. Fill the TIM_TimeBaseInitStruct with the desired parameters. + + 3. Call TIM_TimeBaseInit(TIMx, &TIM_TimeBaseInitStruct) to configure the Time Base unit + with the corresponding configuration + + 4. Enable the NVIC if you need to generate the update interrupt. + + 5. Enable the corresponding interrupt using the function TIM_ITConfig(TIMx, TIM_IT_Update) + + 6. Call the TIM_Cmd(ENABLE) function to enable the TIM counter. + + Note1: All other functions can be used separately to modify, if needed, + a specific feature of the Timer. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the TIMx peripheral registers to their default reset values. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @retval None + + */ +void TIM_DeInit(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + if (TIMx == TIM1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); + } + else if (TIMx == TIM2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); + } + else if (TIMx == TIM3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); + } + else if (TIMx == TIM4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); + } + else if (TIMx == TIM5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); + } + else if (TIMx == TIM6) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); + } + else if (TIMx == TIM7) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); + } + else if (TIMx == TIM8) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); + } + else if (TIMx == TIM9) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE); + } + else if (TIMx == TIM10) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE); + } + else if (TIMx == TIM11) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE); + } + else if (TIMx == TIM12) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE); + } + else if (TIMx == TIM13) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE); + } + else + { + if (TIMx == TIM14) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE); + } + } +} + +/** + * @brief Initializes the TIMx Time Base Unit peripheral according to + * the specified parameters in the TIM_TimeBaseInitStruct. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + uint16_t tmpcr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); + assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); + + tmpcr1 = TIMx->CR1; + + if((TIMx == TIM1) || (TIMx == TIM8)|| + (TIMx == TIM2) || (TIMx == TIM3)|| + (TIMx == TIM4) || (TIMx == TIM5)) + { + /* Select the Counter Mode */ + tmpcr1 &= (uint16_t)(~(TIM_CR1_DIR | TIM_CR1_CMS)); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; + } + + if((TIMx != TIM6) && (TIMx != TIM7)) + { + /* Set the clock division */ + tmpcr1 &= (uint16_t)(~TIM_CR1_CKD); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; + } + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; + + /* Set the Prescaler value */ + TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; + + if ((TIMx == TIM1) || (TIMx == TIM8)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter(only for TIM1 and TIM8) value immediatly */ + TIMx->EGR = TIM_PSCReloadMode_Immediate; +} + +/** + * @brief Fills each TIM_TimeBaseInitStruct member with its default value. + * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef + * structure which will be initialized. + * @retval None + */ +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + /* Set the default configuration */ + TIM_TimeBaseInitStruct->TIM_Period = 0xFFFFFFFF; + TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; + TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; + TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; +} + +/** + * @brief Configures the TIMx Prescaler. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param Prescaler: specifies the Prescaler Register value + * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode + * This parameter can be one of the following values: + * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event. + * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediatly. + * @retval None + */ +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); + /* Set the Prescaler value */ + TIMx->PSC = Prescaler; + /* Set or reset the UG Bit */ + TIMx->EGR = TIM_PSCReloadMode; +} + +/** + * @brief Specifies the TIMx Counter Mode to be used. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_CounterMode: specifies the Counter Mode to be used + * This parameter can be one of the following values: + * @arg TIM_CounterMode_Up: TIM Up Counting Mode + * @arg TIM_CounterMode_Down: TIM Down Counting Mode + * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 + * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 + * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 + * @retval None + */ +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode) +{ + uint16_t tmpcr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); + + tmpcr1 = TIMx->CR1; + + /* Reset the CMS and DIR Bits */ + tmpcr1 &= (uint16_t)~(TIM_CR1_DIR | TIM_CR1_CMS); + + /* Set the Counter Mode */ + tmpcr1 |= TIM_CounterMode; + + /* Write to TIMx CR1 register */ + TIMx->CR1 = tmpcr1; +} + +/** + * @brief Sets the TIMx Counter Register value + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param Counter: specifies the Counter register new value. + * @retval None + */ +void TIM_SetCounter(TIM_TypeDef* TIMx, uint32_t Counter) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Set the Counter Register value */ + TIMx->CNT = Counter; +} + +/** + * @brief Sets the TIMx Autoreload Register value + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param Autoreload: specifies the Autoreload register new value. + * @retval None + */ +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint32_t Autoreload) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Set the Autoreload Register value */ + TIMx->ARR = Autoreload; +} + +/** + * @brief Gets the TIMx Counter value. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @retval Counter Register value + */ +uint32_t TIM_GetCounter(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Get the Counter Register value */ + return TIMx->CNT; +} + +/** + * @brief Gets the TIMx Prescaler value. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @retval Prescaler Register value. + */ +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Get the Prescaler Register value */ + return TIMx->PSC; +} + +/** + * @brief Enables or Disables the TIMx Update event. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param NewState: new state of the TIMx UDIS bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the Update Disable Bit */ + TIMx->CR1 |= TIM_CR1_UDIS; + } + else + { + /* Reset the Update Disable Bit */ + TIMx->CR1 &= (uint16_t)~TIM_CR1_UDIS; + } +} + +/** + * @brief Configures the TIMx Update Request Interrupt source. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param TIM_UpdateSource: specifies the Update source. + * This parameter can be one of the following values: + * @arg TIM_UpdateSource_Global: Source of update is the counter + * overflow/underflow or the setting of UG bit, or an update + * generation through the slave mode controller. + * @arg TIM_UpdateSource_Regular: Source of update is counter overflow/underflow. + * @retval None + */ +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); + + if (TIM_UpdateSource != TIM_UpdateSource_Global) + { + /* Set the URS Bit */ + TIMx->CR1 |= TIM_CR1_URS; + } + else + { + /* Reset the URS Bit */ + TIMx->CR1 &= (uint16_t)~TIM_CR1_URS; + } +} + +/** + * @brief Enables or disables TIMx peripheral Preload register on ARR. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param NewState: new state of the TIMx peripheral Preload register + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the ARR Preload Bit */ + TIMx->CR1 |= TIM_CR1_ARPE; + } + else + { + /* Reset the ARR Preload Bit */ + TIMx->CR1 &= (uint16_t)~TIM_CR1_ARPE; + } +} + +/** + * @brief Selects the TIMx's One Pulse Mode. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param TIM_OPMode: specifies the OPM Mode to be used. + * This parameter can be one of the following values: + * @arg TIM_OPMode_Single + * @arg TIM_OPMode_Repetitive + * @retval None + */ +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); + + /* Reset the OPM Bit */ + TIMx->CR1 &= (uint16_t)~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + TIMx->CR1 |= TIM_OPMode; +} + +/** + * @brief Sets the TIMx Clock Division value. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_CKD: specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CKD_DIV1: TDTS = Tck_tim + * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim + * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim + * @retval None + */ +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_CKD_DIV(TIM_CKD)); + + /* Reset the CKD Bits */ + TIMx->CR1 &= (uint16_t)(~TIM_CR1_CKD); + + /* Set the CKD value */ + TIMx->CR1 |= TIM_CKD; +} + +/** + * @brief Enables or disables the specified TIM peripheral. + * @param TIMx: where x can be 1 to 14 to select the TIMx peripheral. + * @param NewState: new state of the TIMx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the TIM Counter */ + TIMx->CR1 |= TIM_CR1_CEN; + } + else + { + /* Disable the TIM Counter */ + TIMx->CR1 &= (uint16_t)~TIM_CR1_CEN; + } +} +/** + * @} + */ + +/** @defgroup TIM_Group2 Output Compare management functions + * @brief Output Compare management functions + * +@verbatim + =============================================================================== + Output Compare management functions + =============================================================================== + + =================================================================== + TIM Driver: how to use it in Output Compare Mode + =================================================================== + To use the Timer in Output Compare mode, the following steps are mandatory: + + 1. Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function + + 2. Configure the TIM pins by configuring the corresponding GPIO pins + + 2. Configure the Time base unit as described in the first part of this driver, + if needed, else the Timer will run with the default configuration: + - Autoreload value = 0xFFFF + - Prescaler value = 0x0000 + - Counter mode = Up counting + - Clock Division = TIM_CKD_DIV1 + + 3. Fill the TIM_OCInitStruct with the desired parameters including: + - The TIM Output Compare mode: TIM_OCMode + - TIM Output State: TIM_OutputState + - TIM Pulse value: TIM_Pulse + - TIM Output Compare Polarity : TIM_OCPolarity + + 4. Call TIM_OCxInit(TIMx, &TIM_OCInitStruct) to configure the desired channel with the + corresponding configuration + + 5. Call the TIM_Cmd(ENABLE) function to enable the TIM counter. + + Note1: All other functions can be used separately to modify, if needed, + a specific feature of the Timer. + + Note2: In case of PWM mode, this function is mandatory: + TIM_OCxPreloadConfig(TIMx, TIM_OCPreload_ENABLE); + + Note3: If the corresponding interrupt or DMA request are needed, the user should: + 1. Enable the NVIC (or the DMA) to use the TIM interrupts (or DMA requests). + 2. Enable the corresponding interrupt (or DMA request) using the function + TIM_ITConfig(TIMx, TIM_IT_CCx) (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx)) + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIMx Channel1 according to the specified parameters in + * the TIM_OCInitStruct. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains + * the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= (uint16_t)~TIM_CCMR1_OC1M; + tmpccmrx &= (uint16_t)~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; + + /* Set the Output State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputState; + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; + /* Reset the Output N State */ + tmpccer &= (uint16_t)~TIM_CCER_CC1NE; + + /* Set the Output N State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputNState; + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)~TIM_CR2_OIS1; + tmpcr2 &= (uint16_t)~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel2 according to the specified parameters + * in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains + * the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)~TIM_CCMR1_OC2M; + tmpccmrx &= (uint16_t)~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4); + /* Reset the Output N State */ + tmpccer &= (uint16_t)~TIM_CCER_CC2NE; + + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4); + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)~TIM_CR2_OIS2; + tmpcr2 &= (uint16_t)~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2); + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel3 according to the specified parameters + * in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains + * the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)~TIM_CCMR2_OC3M; + tmpccmrx &= (uint16_t)~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8); + /* Reset the Output N State */ + tmpccer &= (uint16_t)~TIM_CCER_CC3NE; + + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8); + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)~TIM_CR2_OIS3; + tmpcr2 &= (uint16_t)~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4); + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel4 according to the specified parameters + * in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains + * the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)~TIM_CCMR2_OC4M; + tmpccmrx &= (uint16_t)~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + /* Reset the Output Compare IDLE State */ + tmpcr2 &=(uint16_t) ~TIM_CR2_OIS4; + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Fills each TIM_OCInitStruct member with its default value. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + /* Set the default configuration */ + TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; + TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; + TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; + TIM_OCInitStruct->TIM_Pulse = 0x00000000; + TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; + TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; +} + +/** + * @brief Selects the TIM Output Compare Mode. + * @note This function disables the selected channel before changing the Output + * Compare Mode. If needed, user has to enable this channel using + * TIM_CCxCmd() and TIM_CCxNCmd() functions. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_OCMode: specifies the TIM Output Compare Mode. + * This parameter can be one of the following values: + * @arg TIM_OCMode_Timing + * @arg TIM_OCMode_Active + * @arg TIM_OCMode_Toggle + * @arg TIM_OCMode_PWM1 + * @arg TIM_OCMode_PWM2 + * @arg TIM_ForcedAction_Active + * @arg TIM_ForcedAction_InActive + * @retval None + */ +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode) +{ + uint32_t tmp = 0; + uint16_t tmp1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_OCM(TIM_OCMode)); + + tmp = (uint32_t) TIMx; + tmp += CCMR_OFFSET; + + tmp1 = CCER_CCE_SET << (uint16_t)TIM_Channel; + + /* Disable the Channel: Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t) ~tmp1; + + if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) + { + tmp += (TIM_Channel>>1); + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= CCMR_OC13M_MASK; + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= TIM_OCMode; + } + else + { + tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1; + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= CCMR_OC24M_MASK; + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8); + } +} + +/** + * @brief Sets the TIMx Capture Compare1 Register value + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param Compare1: specifies the Capture Compare1 register new value. + * @retval None + */ +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint32_t Compare1) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + + /* Set the Capture Compare1 Register value */ + TIMx->CCR1 = Compare1; +} + +/** + * @brief Sets the TIMx Capture Compare2 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param Compare2: specifies the Capture Compare2 register new value. + * @retval None + */ +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint32_t Compare2) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + + /* Set the Capture Compare2 Register value */ + TIMx->CCR2 = Compare2; +} + +/** + * @brief Sets the TIMx Capture Compare3 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param Compare3: specifies the Capture Compare3 register new value. + * @retval None + */ +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint32_t Compare3) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + + /* Set the Capture Compare3 Register value */ + TIMx->CCR3 = Compare3; +} + +/** + * @brief Sets the TIMx Capture Compare4 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param Compare4: specifies the Capture Compare4 register new value. + * @retval None + */ +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint32_t Compare4) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + + /* Set the Capture Compare4 Register value */ + TIMx->CCR4 = Compare4; +} + +/** + * @brief Forces the TIMx output 1 waveform to active or inactive level. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC1REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF. + * @retval None + */ +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC1M Bits */ + tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC1M; + + /* Configure The Forced output Mode */ + tmpccmr1 |= TIM_ForcedAction; + + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 2 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC2REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF. + * @retval None + */ +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC2M Bits */ + tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC2M; + + /* Configure The Forced output Mode */ + tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8); + + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 3 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC3REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF. + * @retval None + */ +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + + tmpccmr2 = TIMx->CCMR2; + + /* Reset the OC1M Bits */ + tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC3M; + + /* Configure The Forced output Mode */ + tmpccmr2 |= TIM_ForcedAction; + + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Forces the TIMx output 4 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC4REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF. + * @retval None + */ +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr2 = TIMx->CCMR2; + + /* Reset the OC2M Bits */ + tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC4M; + + /* Configure The Forced output Mode */ + tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8); + + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR1. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC1PE Bit */ + tmpccmr1 &= (uint16_t)(~TIM_CCMR1_OC1PE); + + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= TIM_OCPreload; + + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR2. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC2PE Bit */ + tmpccmr1 &= (uint16_t)(~TIM_CCMR1_OC2PE); + + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8); + + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR3. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + + tmpccmr2 = TIMx->CCMR2; + + /* Reset the OC3PE Bit */ + tmpccmr2 &= (uint16_t)(~TIM_CCMR2_OC3PE); + + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= TIM_OCPreload; + + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR4. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + + tmpccmr2 = TIMx->CCMR2; + + /* Reset the OC4PE Bit */ + tmpccmr2 &= (uint16_t)(~TIM_CCMR2_OC4PE); + + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8); + + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 1 Fast feature. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC1FE Bit */ + tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC1FE; + + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= TIM_OCFast; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 2 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC2FE Bit */ + tmpccmr1 &= (uint16_t)(~TIM_CCMR1_OC2FE); + + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCFast << 8); + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 3 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + + /* Reset the OC3FE Bit */ + tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC3FE; + + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= TIM_OCFast; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 4 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + + /* Reset the OC4FE Bit */ + tmpccmr2 &= (uint16_t)(~TIM_CCMR2_OC4FE); + + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCFast << 8); + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF1 signal on an external event + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC1CE Bit */ + tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC1CE; + + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= TIM_OCClear; + + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF2 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC2CE Bit */ + tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC2CE; + + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCClear << 8); + + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF3 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr2 = TIMx->CCMR2; + + /* Reset the OC3CE Bit */ + tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC3CE; + + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= TIM_OCClear; + + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF4 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr2 = TIMx->CCMR2; + + /* Reset the OC4CE Bit */ + tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC4CE; + + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCClear << 8); + + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx channel 1 polarity. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC1 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + + tmpccer = TIMx->CCER; + + /* Set or Reset the CC1P Bit */ + tmpccer &= (uint16_t)(~TIM_CCER_CC1P); + tmpccer |= TIM_OCPolarity; + + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 1N polarity. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC1N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + + /* Set or Reset the CC1NP Bit */ + tmpccer &= (uint16_t)~TIM_CCER_CC1NP; + tmpccer |= TIM_OCNPolarity; + + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 2 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_OCPolarity: specifies the OC2 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + + tmpccer = TIMx->CCER; + + /* Set or Reset the CC2P Bit */ + tmpccer &= (uint16_t)(~TIM_CCER_CC2P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 4); + + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 2N polarity. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC2N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + + /* Set or Reset the CC2NP Bit */ + tmpccer &= (uint16_t)~TIM_CCER_CC2NP; + tmpccer |= (uint16_t)(TIM_OCNPolarity << 4); + + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 3 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC3 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + + tmpccer = TIMx->CCER; + + /* Set or Reset the CC3P Bit */ + tmpccer &= (uint16_t)~TIM_CCER_CC3P; + tmpccer |= (uint16_t)(TIM_OCPolarity << 8); + + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 3N polarity. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC3N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + + /* Set or Reset the CC3NP Bit */ + tmpccer &= (uint16_t)~TIM_CCER_CC3NP; + tmpccer |= (uint16_t)(TIM_OCNPolarity << 8); + + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 4 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC4 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + + tmpccer = TIMx->CCER; + + /* Set or Reset the CC4P Bit */ + tmpccer &= (uint16_t)~TIM_CCER_CC4P; + tmpccer |= (uint16_t)(TIM_OCPolarity << 12); + + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_CCx: specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. + * @retval None + */ +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_CCX(TIM_CCx)); + + tmp = CCER_CCE_SET << TIM_Channel; + + /* Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t)~ tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel); +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. + * @retval None + */ +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_CCXN(TIM_CCxN)); + + tmp = CCER_CCNE_SET << TIM_Channel; + + /* Reset the CCxNE Bit */ + TIMx->CCER &= (uint16_t) ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel); +} +/** + * @} + */ + +/** @defgroup TIM_Group3 Input Capture management functions + * @brief Input Capture management functions + * +@verbatim + =============================================================================== + Input Capture management functions + =============================================================================== + + =================================================================== + TIM Driver: how to use it in Input Capture Mode + =================================================================== + To use the Timer in Input Capture mode, the following steps are mandatory: + + 1. Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function + + 2. Configure the TIM pins by configuring the corresponding GPIO pins + + 2. Configure the Time base unit as described in the first part of this driver, + if needed, else the Timer will run with the default configuration: + - Autoreload value = 0xFFFF + - Prescaler value = 0x0000 + - Counter mode = Up counting + - Clock Division = TIM_CKD_DIV1 + + 3. Fill the TIM_ICInitStruct with the desired parameters including: + - TIM Channel: TIM_Channel + - TIM Input Capture polarity: TIM_ICPolarity + - TIM Input Capture selection: TIM_ICSelection + - TIM Input Capture Prescaler: TIM_ICPrescaler + - TIM Input CApture filter value: TIM_ICFilter + + 4. Call TIM_ICInit(TIMx, &TIM_ICInitStruct) to configure the desired channel with the + corresponding configuration and to measure only frequency or duty cycle of the input signal, + or, + Call TIM_PWMIConfig(TIMx, &TIM_ICInitStruct) to configure the desired channels with the + corresponding configuration and to measure the frequency and the duty cycle of the input signal + + 5. Enable the NVIC or the DMA to read the measured frequency. + + 6. Enable the corresponding interrupt (or DMA request) to read the Captured value, + using the function TIM_ITConfig(TIMx, TIM_IT_CCx) (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx)) + + 7. Call the TIM_Cmd(ENABLE) function to enable the TIM counter. + + 8. Use TIM_GetCapturex(TIMx); to read the captured value. + + Note1: All other functions can be used separately to modify, if needed, + a specific feature of the Timer. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM peripheral according to the specified parameters + * in the TIM_ICInitStruct. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure that contains + * the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); + + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + /* TI4 Configuration */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Fills each TIM_ICInitStruct member with its default value. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; + TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; + TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; + TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; + TIM_ICInitStruct->TIM_ICFilter = 0x00; +} + +/** + * @brief Configures the TIM peripheral according to the specified parameters + * in the TIM_ICInitStruct to measure an external PWM signal. + * @param TIMx: where x can be 1, 2, 3, 4, 5,8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure that contains + * the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + uint16_t icoppositepolarity = TIM_ICPolarity_Rising; + uint16_t icoppositeselection = TIM_ICSelection_DirectTI; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + + /* Select the Opposite Input Polarity */ + if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) + { + icoppositepolarity = TIM_ICPolarity_Falling; + } + else + { + icoppositepolarity = TIM_ICPolarity_Rising; + } + /* Select the Opposite Input */ + if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) + { + icoppositeselection = TIM_ICSelection_IndirectTI; + } + else + { + icoppositeselection = TIM_ICSelection_DirectTI; + } + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI2 Configuration */ + TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + /* TI2 Configuration */ + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI1 Configuration */ + TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Gets the TIMx Input Capture 1 value. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @retval Capture Compare 1 Register value. + */ +uint32_t TIM_GetCapture1(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + + /* Get the Capture 1 Register value */ + return TIMx->CCR1; +} + +/** + * @brief Gets the TIMx Input Capture 2 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @retval Capture Compare 2 Register value. + */ +uint32_t TIM_GetCapture2(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + + /* Get the Capture 2 Register value */ + return TIMx->CCR2; +} + +/** + * @brief Gets the TIMx Input Capture 3 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @retval Capture Compare 3 Register value. + */ +uint32_t TIM_GetCapture3(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + + /* Get the Capture 3 Register value */ + return TIMx->CCR3; +} + +/** + * @brief Gets the TIMx Input Capture 4 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @retval Capture Compare 4 Register value. + */ +uint32_t TIM_GetCapture4(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + + /* Get the Capture 4 Register value */ + return TIMx->CCR4; +} + +/** + * @brief Sets the TIMx Input Capture 1 prescaler. + * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + + /* Reset the IC1PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + TIMx->CCMR1 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 2 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + + /* Reset the IC2PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8); +} + +/** + * @brief Sets the TIMx Input Capture 3 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + + /* Reset the IC3PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + TIMx->CCMR2 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 4 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + + /* Reset the IC4PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8); +} +/** + * @} + */ + +/** @defgroup TIM_Group4 Advanced-control timers (TIM1 and TIM8) specific features + * @brief Advanced-control timers (TIM1 and TIM8) specific features + * +@verbatim + =============================================================================== + Advanced-control timers (TIM1 and TIM8) specific features + =============================================================================== + + =================================================================== + TIM Driver: how to use the Break feature + =================================================================== + After configuring the Timer channel(s) in the appropriate Output Compare mode: + + 1. Fill the TIM_BDTRInitStruct with the desired parameters for the Timer + Break Polarity, dead time, Lock level, the OSSI/OSSR State and the + AOE(automatic output enable). + + 2. Call TIM_BDTRConfig(TIMx, &TIM_BDTRInitStruct) to configure the Timer + + 3. Enable the Main Output using TIM_CtrlPWMOutputs(TIM1, ENABLE) + + 4. Once the break even occurs, the Timer's output signals are put in reset + state or in a known state (according to the configuration made in + TIM_BDTRConfig() function). + +@endverbatim + * @{ + */ + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param TIMx: where x can be 1 or 8 to select the TIM + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @retval None + */ +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); + assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); + assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); + assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); + assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | + TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | + TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | + TIM_BDTRInitStruct->TIM_AutomaticOutput; +} + +/** + * @brief Fills each TIM_BDTRInitStruct member with its default value. + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which + * will be initialized. + * @retval None + */ +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; + TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; + TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; + TIM_BDTRInitStruct->TIM_DeadTime = 0x00; + TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; + TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; + TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; +} + +/** + * @brief Enables or disables the TIM peripheral Main Outputs. + * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral. + * @param NewState: new state of the TIM peripheral Main Outputs. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the TIM Main Output */ + TIMx->BDTR |= TIM_BDTR_MOE; + } + else + { + /* Disable the TIM Main Output */ + TIMx->BDTR &= (uint16_t)~TIM_BDTR_MOE; + } +} + +/** + * @brief Selects the TIM peripheral Commutation event. + * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral + * @param NewState: new state of the Commutation event. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the COM Bit */ + TIMx->CR2 |= TIM_CR2_CCUS; + } + else + { + /* Reset the COM Bit */ + TIMx->CR2 &= (uint16_t)~TIM_CR2_CCUS; + } +} + +/** + * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit. + * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral + * @param NewState: new state of the Capture Compare Preload Control bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the CCPC Bit */ + TIMx->CR2 |= TIM_CR2_CCPC; + } + else + { + /* Reset the CCPC Bit */ + TIMx->CR2 &= (uint16_t)~TIM_CR2_CCPC; + } +} +/** + * @} + */ + +/** @defgroup TIM_Group5 Interrupts DMA and flags management functions + * @brief Interrupts, DMA and flags management functions + * +@verbatim + =============================================================================== + Interrupts, DMA and flags management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified TIM interrupts. + * @param TIMx: where x can be 1 to 14 to select the TIMx peripheral. + * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * + * @note For TIM6 and TIM7 only the parameter TIM_IT_Update can be used + * @note For TIM9 and TIM12 only one of the following parameters can be used: TIM_IT_Update, + * TIM_IT_CC1, TIM_IT_CC2 or TIM_IT_Trigger. + * @note For TIM10, TIM11, TIM13 and TIM14 only one of the following parameters can + * be used: TIM_IT_Update or TIM_IT_CC1 + * @note TIM_IT_COM and TIM_IT_Break can be used only with TIM1 and TIM8 + * + * @param NewState: new state of the TIM interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_IT(TIM_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Interrupt sources */ + TIMx->DIER |= TIM_IT; + } + else + { + /* Disable the Interrupt sources */ + TIMx->DIER &= (uint16_t)~TIM_IT; + } +} + +/** + * @brief Configures the TIMx event to be generate by software. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param TIM_EventSource: specifies the event source. + * This parameter can be one or more of the following values: + * @arg TIM_EventSource_Update: Timer update Event source + * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EventSource_COM: Timer COM event source + * @arg TIM_EventSource_Trigger: Timer Trigger Event source + * @arg TIM_EventSource_Break: Timer Break event source + * + * @note TIM6 and TIM7 can only generate an update event. + * @note TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8. + * + * @retval None + */ +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); + + /* Set the event sources */ + TIMx->EGR = TIM_EventSource; +} + +/** + * @brief Checks whether the specified TIM flag is set or not. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param TIM_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 over capture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 over capture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 over capture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 over capture Flag + * + * @note TIM6 and TIM7 can have only one update flag. + * @note TIM_FLAG_COM and TIM_FLAG_Break are used only with TIM1 and TIM8. + * + * @retval The new state of TIM_FLAG (SET or RESET). + */ +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); + + + if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's pending flags. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param TIM_FLAG: specifies the flag bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 over capture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 over capture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 over capture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 over capture Flag + * + * @note TIM6 and TIM7 can have only one update flag. + * @note TIM_FLAG_COM and TIM_FLAG_Break are used only with TIM1 and TIM8. + * + * @retval None + */ +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Clear the flags */ + TIMx->SR = (uint16_t)~TIM_FLAG; +} + +/** + * @brief Checks whether the TIM interrupt has occurred or not. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param TIM_IT: specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * + * @note TIM6 and TIM7 can generate only an update interrupt. + * @note TIM_IT_COM and TIM_IT_Break are used only with TIM1 and TIM8. + * + * @retval The new state of the TIM_IT(SET or RESET). + */ +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itstatus = 0x0, itenable = 0x0; + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_IT(TIM_IT)); + + itstatus = TIMx->SR & TIM_IT; + + itenable = TIMx->DIER & TIM_IT; + if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's interrupt pending bits. + * @param TIMx: where x can be 1 to 14 to select the TIM peripheral. + * @param TIM_IT: specifies the pending bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM1 update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * + * @note TIM6 and TIM7 can generate only an update interrupt. + * @note TIM_IT_COM and TIM_IT_Break are used only with TIM1 and TIM8. + * + * @retval None + */ +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + /* Clear the IT pending Bit */ + TIMx->SR = (uint16_t)~TIM_IT; +} + +/** + * @brief Configures the TIMx's DMA interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_DMABase: DMA Base address. + * This parameter can be one of the following values: + * @arg TIM_DMABase_CR1 + * @arg TIM_DMABase_CR2 + * @arg TIM_DMABase_SMCR + * @arg TIM_DMABase_DIER + * @arg TIM1_DMABase_SR + * @arg TIM_DMABase_EGR + * @arg TIM_DMABase_CCMR1 + * @arg TIM_DMABase_CCMR2 + * @arg TIM_DMABase_CCER + * @arg TIM_DMABase_CNT + * @arg TIM_DMABase_PSC + * @arg TIM_DMABase_ARR + * @arg TIM_DMABase_RCR + * @arg TIM_DMABase_CCR1 + * @arg TIM_DMABase_CCR2 + * @arg TIM_DMABase_CCR3 + * @arg TIM_DMABase_CCR4 + * @arg TIM_DMABase_BDTR + * @arg TIM_DMABase_DCR + * @param TIM_DMABurstLength: DMA Burst length. This parameter can be one value + * between: TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers. + * @retval None + */ +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); + assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); + + /* Set the DMA Base and the DMA Burst Length */ + TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; +} + +/** + * @brief Enables or disables the TIMx's DMA Requests. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the TIM peripheral. + * @param TIM_DMASource: specifies the DMA Request sources. + * This parameter can be any combination of the following values: + * @arg TIM_DMA_Update: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_Trigger: TIM Trigger DMA source + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST5_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DMA sources */ + TIMx->DIER |= TIM_DMASource; + } + else + { + /* Disable the DMA sources */ + TIMx->DIER &= (uint16_t)~TIM_DMASource; + } +} + +/** + * @brief Selects the TIMx peripheral Capture Compare DMA source. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param NewState: new state of the Capture Compare DMA source + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the CCDS Bit */ + TIMx->CR2 |= TIM_CR2_CCDS; + } + else + { + /* Reset the CCDS Bit */ + TIMx->CR2 &= (uint16_t)~TIM_CR2_CCDS; + } +} +/** + * @} + */ + +/** @defgroup TIM_Group6 Clocks management functions + * @brief Clocks management functions + * +@verbatim + =============================================================================== + Clocks management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the TIMx internal Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @retval None + */ +void TIM_InternalClockConfig(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + + /* Disable slave mode to clock the prescaler directly with the internal clock */ + TIMx->SMCR &= (uint16_t)~TIM_SMCR_SMS; +} + +/** + * @brief Configures the TIMx Internal Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_InputTriggerSource: Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @retval None + */ +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); + + /* Select the Internal Trigger */ + TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); + + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the TIMx Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14 + * to select the TIM peripheral. + * @param TIM_TIxExternalCLKSource: Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector + * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 + * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 + * @param TIM_ICPolarity: specifies the TIx Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param ICFilter: specifies the filter value. + * This parameter must be a value between 0x0 and 0xF. + * @retval None + */ +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); + assert_param(IS_TIM_IC_FILTER(ICFilter)); + + /* Configure the Timer Input Clock Source */ + if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) + { + TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + else + { + TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + /* Select the Trigger source */ + TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the External clock Mode1 + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + + /* Reset the SMS Bits */ + tmpsmcr &= (uint16_t)~TIM_SMCR_SMS; + + /* Select the External clock mode1 */ + tmpsmcr |= TIM_SlaveMode_External1; + + /* Select the Trigger selection : ETRF */ + tmpsmcr &= (uint16_t)~TIM_SMCR_TS; + tmpsmcr |= TIM_TS_ETRF; + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the External clock Mode2 + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + + /* Enable the External clock mode2 */ + TIMx->SMCR |= TIM_SMCR_ECE; +} +/** + * @} + */ + +/** @defgroup TIM_Group7 Synchronization management functions + * @brief Synchronization management functions + * +@verbatim + =============================================================================== + Synchronization management functions + =============================================================================== + + =================================================================== + TIM Driver: how to use it in synchronization Mode + =================================================================== + Case of two/several Timers + ************************** + 1. Configure the Master Timers using the following functions: + - void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); + - void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); + 2. Configure the Slave Timers using the following functions: + - void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); + - void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); + + Case of Timers and external trigger(ETR pin) + ******************************************** + 1. Configure the External trigger using this function: + - void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); + 2. Configure the Slave Timers using the following functions: + - void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); + - void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); + +@endverbatim + * @{ + */ + +/** + * @brief Selects the Input Trigger source + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14 + * to select the TIM peripheral. + * @param TIM_InputTriggerSource: The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + uint16_t tmpsmcr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + + /* Reset the TS Bits */ + tmpsmcr &= (uint16_t)~TIM_SMCR_TS; + + /* Set the Input Trigger source */ + tmpsmcr |= TIM_InputTriggerSource; + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Selects the TIMx Trigger Output Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the TIM peripheral. + * + * @param TIM_TRGOSource: specifies the Trigger Output source. + * This parameter can be one of the following values: + * + * - For all TIMx + * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output(TRGO) + * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output(TRGO) + * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output(TRGO) + * + * - For all TIMx except TIM6 and TIM7 + * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag + * is to be set, as soon as a capture or compare match occurs(TRGO) + * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output(TRGO) + * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output(TRGO) + * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output(TRGO) + * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output(TRGO) + * + * @retval None + */ +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST5_PERIPH(TIMx)); + assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); + + /* Reset the MMS Bits */ + TIMx->CR2 &= (uint16_t)~TIM_CR2_MMS; + /* Select the TRGO source */ + TIMx->CR2 |= TIM_TRGOSource; +} + +/** + * @brief Selects the TIMx Slave Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral. + * @param TIM_SlaveMode: specifies the Timer Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal(TRGI) reinitialize + * the counter and triggers an update of the registers + * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high + * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI + * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter + * @retval None + */ +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); + + /* Reset the SMS Bits */ + TIMx->SMCR &= (uint16_t)~TIM_SMCR_SMS; + + /* Select the Slave Mode */ + TIMx->SMCR |= TIM_SlaveMode; +} + +/** + * @brief Sets or Resets the TIMx Master/Slave Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral. + * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer + * and its slaves (through TRGO) + * @arg TIM_MasterSlaveMode_Disable: No action + * @retval None + */ +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); + + /* Reset the MSM Bit */ + TIMx->SMCR &= (uint16_t)~TIM_SMCR_MSM; + + /* Set or Reset the MSM Bit */ + TIMx->SMCR |= TIM_MasterSlaveMode; +} + +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= SMCR_ETR_MASK; + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @} + */ + +/** @defgroup TIM_Group8 Specific interface management functions + * @brief Specific interface management functions + * +@verbatim + =============================================================================== + Specific interface management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the TIMx Encoder Interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_EncoderMode: specifies the TIMx Encoder Mode. + * This parameter can be one of the following values: + * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level. + * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level. + * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending + * on the level of the other input. + * @param TIM_IC1Polarity: specifies the IC1 Polarity + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @param TIM_IC2Polarity: specifies the IC2 Polarity + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @retval None + */ +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity) +{ + uint16_t tmpsmcr = 0; + uint16_t tmpccmr1 = 0; + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Set the encoder Mode */ + tmpsmcr &= (uint16_t)~TIM_SMCR_SMS; + tmpsmcr |= TIM_EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ((uint16_t)~TIM_CCMR1_CC1S) & ((uint16_t)~TIM_CCMR1_CC2S); + tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0; + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ((uint16_t)~TIM_CCER_CC1P) & ((uint16_t)~TIM_CCER_CC2P); + tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4)); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Enables or disables the TIMx's Hall sensor interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param NewState: new state of the TIMx Hall sensor interface. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Set the TI1S Bit */ + TIMx->CR2 |= TIM_CR2_TI1S; + } + else + { + /* Reset the TI1S Bit */ + TIMx->CR2 &= (uint16_t)~TIM_CR2_TI1S; + } +} +/** + * @} + */ + +/** @defgroup TIM_Group9 Specific remapping management function + * @brief Specific remapping management function + * +@verbatim + =============================================================================== + Specific remapping management function + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures the TIM2, TIM5 and TIM11 Remapping input capabilities. + * @param TIMx: where x can be 2, 5 or 11 to select the TIM peripheral. + * @param TIM_Remap: specifies the TIM input remapping source. + * This parameter can be one of the following values: + * @arg TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default) + * @arg TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trogger output. + * @arg TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF. + * @arg TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF. + * @arg TIM5_GPIO: TIM5 CH4 input is connected to dedicated Timer pin(default) + * @arg TIM5_LSI: TIM5 CH4 input is connected to LSI clock. + * @arg TIM5_LSE: TIM5 CH4 input is connected to LSE clock. + * @arg TIM5_RTC: TIM5 CH4 input is connected to RTC Output event. + * @arg TIM11_GPIO: TIM11 CH4 input is connected to dedicated Timer pin(default) + * @arg TIM11_HSE: TIM11 CH4 input is connected to HSE_RTC clock + * (HSE divided by a programmable prescaler) + * @retval None + */ +void TIM_RemapConfig(TIM_TypeDef* TIMx, uint16_t TIM_Remap) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_REMAP(TIM_Remap)); + + /* Set the Timer remapping configuration */ + TIMx->OR = TIM_Remap; +} +/** + * @} + */ + +/** + * @brief Configure the TI1 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14 + * to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @arg TIM_ICPolarity_BothEdge + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input and set the filter */ + tmpccmr1 &= ((uint16_t)~TIM_CCMR1_CC1S) & ((uint16_t)~TIM_CCMR1_IC1F); + tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM + * peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @arg TIM_ICPolarity_BothEdge + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 4); + + /* Select the Input and set the filter */ + tmpccmr1 &= ((uint16_t)~TIM_CCMR1_CC2S) & ((uint16_t)~TIM_CCMR1_IC2F); + tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12); + tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @arg TIM_ICPolarity_BothEdge + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint16_t)~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 8); + + /* Select the Input and set the filter */ + tmpccmr2 &= ((uint16_t)~TIM_CCMR1_CC1S) & ((uint16_t)~TIM_CCMR2_IC3F); + tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @arg TIM_ICPolarity_BothEdge + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 12); + + /* Select the Input and set the filter */ + tmpccmr2 &= ((uint16_t)~TIM_CCMR1_CC2S) & ((uint16_t)~TIM_CCMR1_IC2F); + tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8); + tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= (uint16_t)~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.h new file mode 100644 index 00000000000..a136f882073 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_tim.h @@ -0,0 +1,1144 @@ +/** + ****************************************************************************** + * @file stm32f4xx_tim.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the TIM firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_TIM_H +#define __STM32F4xx_TIM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief TIM Time Base Init structure definition + * @note This structure is used with all TIMx except for TIM6 and TIM7. + */ + +typedef struct +{ + uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t TIM_Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between 0x0000 and 0xFFFF. */ + + uint16_t TIM_ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_Clock_Division_CKD */ + + uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + This parameter must be a number between 0x00 and 0xFF. + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_TimeBaseInitTypeDef; + +/** + * @brief TIM Output Compare Init structure definition + */ + +typedef struct +{ + uint16_t TIM_OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_State */ + + uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_N_State + @note This parameter is valid only for TIM1 and TIM8. */ + + uint32_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_OCInitTypeDef; + +/** + * @brief TIM Input Capture Init structure definition + */ + +typedef struct +{ + + uint16_t TIM_Channel; /*!< Specifies the TIM channel. + This parameter can be a value of @ref TIM_Channel */ + + uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint16_t TIM_ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint16_t TIM_ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between 0x0 and 0xF */ +} TIM_ICInitTypeDef; + +/** + * @brief BDTR structure definition + * @note This structure is used only with TIM1 and TIM8. + */ + +typedef struct +{ + + uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_Lock_level */ + + uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between 0x00 and 0xFF */ + + uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_Break_Polarity */ + + uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BDTRInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_constants + * @{ + */ + +#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM10) || \ + ((PERIPH) == TIM11) || \ + ((PERIPH) == TIM12) || \ + (((PERIPH) == TIM13) || \ + ((PERIPH) == TIM14))) +/* LIST1: TIM1, TIM2, TIM3, TIM4, TIM5, TIM8, TIM9, TIM10, TIM11, TIM12, TIM13 and TIM14 */ +#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM10) || \ + ((PERIPH) == TIM11) || \ + ((PERIPH) == TIM12) || \ + ((PERIPH) == TIM13) || \ + ((PERIPH) == TIM14)) + +/* LIST2: TIM1, TIM2, TIM3, TIM4, TIM5, TIM8, TIM9 and TIM12 */ +#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM12)) +/* LIST3: TIM1, TIM2, TIM3, TIM4, TIM5 and TIM8 */ +#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8)) +/* LIST4: TIM1 and TIM8 */ +#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM8)) +/* LIST5: TIM1, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7 and TIM8 */ +#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8)) +/* LIST6: TIM2, TIM5 and TIM11 */ +#define IS_TIM_LIST6_PERIPH(TIMx)(((TIMx) == TIM2) || \ + ((TIMx) == TIM5) || \ + ((TIMx) == TIM11)) + +/** @defgroup TIM_Output_Compare_and_PWM_modes + * @{ + */ + +#define TIM_OCMode_Timing ((uint16_t)0x0000) +#define TIM_OCMode_Active ((uint16_t)0x0010) +#define TIM_OCMode_Inactive ((uint16_t)0x0020) +#define TIM_OCMode_Toggle ((uint16_t)0x0030) +#define TIM_OCMode_PWM1 ((uint16_t)0x0060) +#define TIM_OCMode_PWM2 ((uint16_t)0x0070) +#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2)) +#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2) || \ + ((MODE) == TIM_ForcedAction_Active) || \ + ((MODE) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode + * @{ + */ + +#define TIM_OPMode_Single ((uint16_t)0x0008) +#define TIM_OPMode_Repetitive ((uint16_t)0x0000) +#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ + ((MODE) == TIM_OPMode_Repetitive)) +/** + * @} + */ + +/** @defgroup TIM_Channel + * @{ + */ + +#define TIM_Channel_1 ((uint16_t)0x0000) +#define TIM_Channel_2 ((uint16_t)0x0004) +#define TIM_Channel_3 ((uint16_t)0x0008) +#define TIM_Channel_4 ((uint16_t)0x000C) + +#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3) || \ + ((CHANNEL) == TIM_Channel_4)) + +#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2)) +#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3)) +/** + * @} + */ + +/** @defgroup TIM_Clock_Division_CKD + * @{ + */ + +#define TIM_CKD_DIV1 ((uint16_t)0x0000) +#define TIM_CKD_DIV2 ((uint16_t)0x0100) +#define TIM_CKD_DIV4 ((uint16_t)0x0200) +#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ + ((DIV) == TIM_CKD_DIV2) || \ + ((DIV) == TIM_CKD_DIV4)) +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode + * @{ + */ + +#define TIM_CounterMode_Up ((uint16_t)0x0000) +#define TIM_CounterMode_Down ((uint16_t)0x0010) +#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020) +#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040) +#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060) +#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ + ((MODE) == TIM_CounterMode_Down) || \ + ((MODE) == TIM_CounterMode_CenterAligned1) || \ + ((MODE) == TIM_CounterMode_CenterAligned2) || \ + ((MODE) == TIM_CounterMode_CenterAligned3)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity + * @{ + */ + +#define TIM_OCPolarity_High ((uint16_t)0x0000) +#define TIM_OCPolarity_Low ((uint16_t)0x0002) +#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ + ((POLARITY) == TIM_OCPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity + * @{ + */ + +#define TIM_OCNPolarity_High ((uint16_t)0x0000) +#define TIM_OCNPolarity_Low ((uint16_t)0x0008) +#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ + ((POLARITY) == TIM_OCNPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State + * @{ + */ + +#define TIM_OutputState_Disable ((uint16_t)0x0000) +#define TIM_OutputState_Enable ((uint16_t)0x0001) +#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ + ((STATE) == TIM_OutputState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State + * @{ + */ + +#define TIM_OutputNState_Disable ((uint16_t)0x0000) +#define TIM_OutputNState_Enable ((uint16_t)0x0004) +#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ + ((STATE) == TIM_OutputNState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_State + * @{ + */ + +#define TIM_CCx_Enable ((uint16_t)0x0001) +#define TIM_CCx_Disable ((uint16_t)0x0000) +#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ + ((CCX) == TIM_CCx_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_N_State + * @{ + */ + +#define TIM_CCxN_Enable ((uint16_t)0x0004) +#define TIM_CCxN_Disable ((uint16_t)0x0000) +#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ + ((CCXN) == TIM_CCxN_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable + * @{ + */ + +#define TIM_Break_Enable ((uint16_t)0x1000) +#define TIM_Break_Disable ((uint16_t)0x0000) +#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ + ((STATE) == TIM_Break_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity + * @{ + */ + +#define TIM_BreakPolarity_Low ((uint16_t)0x0000) +#define TIM_BreakPolarity_High ((uint16_t)0x2000) +#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ + ((POLARITY) == TIM_BreakPolarity_High)) +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset + * @{ + */ + +#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000) +#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000) +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ + ((STATE) == TIM_AutomaticOutput_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Lock_level + * @{ + */ + +#define TIM_LOCKLevel_OFF ((uint16_t)0x0000) +#define TIM_LOCKLevel_1 ((uint16_t)0x0100) +#define TIM_LOCKLevel_2 ((uint16_t)0x0200) +#define TIM_LOCKLevel_3 ((uint16_t)0x0300) +#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ + ((LEVEL) == TIM_LOCKLevel_1) || \ + ((LEVEL) == TIM_LOCKLevel_2) || \ + ((LEVEL) == TIM_LOCKLevel_3)) +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state + * @{ + */ + +#define TIM_OSSIState_Enable ((uint16_t)0x0400) +#define TIM_OSSIState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ + ((STATE) == TIM_OSSIState_Disable)) +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state + * @{ + */ + +#define TIM_OSSRState_Enable ((uint16_t)0x0800) +#define TIM_OSSRState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ + ((STATE) == TIM_OSSRState_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State + * @{ + */ + +#define TIM_OCIdleState_Set ((uint16_t)0x0100) +#define TIM_OCIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ + ((STATE) == TIM_OCIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State + * @{ + */ + +#define TIM_OCNIdleState_Set ((uint16_t)0x0200) +#define TIM_OCNIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ + ((STATE) == TIM_OCNIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity + * @{ + */ + +#define TIM_ICPolarity_Rising ((uint16_t)0x0000) +#define TIM_ICPolarity_Falling ((uint16_t)0x0002) +#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A) +#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ + ((POLARITY) == TIM_ICPolarity_Falling)|| \ + ((POLARITY) == TIM_ICPolarity_BothEdge)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection + * @{ + */ + +#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively. */ +#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */ +#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ + ((SELECTION) == TIM_ICSelection_IndirectTI) || \ + ((SELECTION) == TIM_ICSelection_TRC)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler + * @{ + */ + +#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */ +#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */ +#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */ +#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */ +#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ + ((PRESCALER) == TIM_ICPSC_DIV2) || \ + ((PRESCALER) == TIM_ICPSC_DIV4) || \ + ((PRESCALER) == TIM_ICPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_interrupt_sources + * @{ + */ + +#define TIM_IT_Update ((uint16_t)0x0001) +#define TIM_IT_CC1 ((uint16_t)0x0002) +#define TIM_IT_CC2 ((uint16_t)0x0004) +#define TIM_IT_CC3 ((uint16_t)0x0008) +#define TIM_IT_CC4 ((uint16_t)0x0010) +#define TIM_IT_COM ((uint16_t)0x0020) +#define TIM_IT_Trigger ((uint16_t)0x0040) +#define TIM_IT_Break ((uint16_t)0x0080) +#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000)) + +#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ + ((IT) == TIM_IT_CC1) || \ + ((IT) == TIM_IT_CC2) || \ + ((IT) == TIM_IT_CC3) || \ + ((IT) == TIM_IT_CC4) || \ + ((IT) == TIM_IT_COM) || \ + ((IT) == TIM_IT_Trigger) || \ + ((IT) == TIM_IT_Break)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address + * @{ + */ + +#define TIM_DMABase_CR1 ((uint16_t)0x0000) +#define TIM_DMABase_CR2 ((uint16_t)0x0001) +#define TIM_DMABase_SMCR ((uint16_t)0x0002) +#define TIM_DMABase_DIER ((uint16_t)0x0003) +#define TIM_DMABase_SR ((uint16_t)0x0004) +#define TIM_DMABase_EGR ((uint16_t)0x0005) +#define TIM_DMABase_CCMR1 ((uint16_t)0x0006) +#define TIM_DMABase_CCMR2 ((uint16_t)0x0007) +#define TIM_DMABase_CCER ((uint16_t)0x0008) +#define TIM_DMABase_CNT ((uint16_t)0x0009) +#define TIM_DMABase_PSC ((uint16_t)0x000A) +#define TIM_DMABase_ARR ((uint16_t)0x000B) +#define TIM_DMABase_RCR ((uint16_t)0x000C) +#define TIM_DMABase_CCR1 ((uint16_t)0x000D) +#define TIM_DMABase_CCR2 ((uint16_t)0x000E) +#define TIM_DMABase_CCR3 ((uint16_t)0x000F) +#define TIM_DMABase_CCR4 ((uint16_t)0x0010) +#define TIM_DMABase_BDTR ((uint16_t)0x0011) +#define TIM_DMABase_DCR ((uint16_t)0x0012) +#define TIM_DMABase_OR ((uint16_t)0x0013) +#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ + ((BASE) == TIM_DMABase_CR2) || \ + ((BASE) == TIM_DMABase_SMCR) || \ + ((BASE) == TIM_DMABase_DIER) || \ + ((BASE) == TIM_DMABase_SR) || \ + ((BASE) == TIM_DMABase_EGR) || \ + ((BASE) == TIM_DMABase_CCMR1) || \ + ((BASE) == TIM_DMABase_CCMR2) || \ + ((BASE) == TIM_DMABase_CCER) || \ + ((BASE) == TIM_DMABase_CNT) || \ + ((BASE) == TIM_DMABase_PSC) || \ + ((BASE) == TIM_DMABase_ARR) || \ + ((BASE) == TIM_DMABase_RCR) || \ + ((BASE) == TIM_DMABase_CCR1) || \ + ((BASE) == TIM_DMABase_CCR2) || \ + ((BASE) == TIM_DMABase_CCR3) || \ + ((BASE) == TIM_DMABase_CCR4) || \ + ((BASE) == TIM_DMABase_BDTR) || \ + ((BASE) == TIM_DMABase_DCR) || \ + ((BASE) == TIM_DMABase_OR)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length + * @{ + */ + +#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000) +#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100) +#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200) +#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300) +#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400) +#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500) +#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600) +#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700) +#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800) +#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900) +#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00) +#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00) +#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00) +#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00) +#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00) +#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00) +#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000) +#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100) +#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \ + ((LENGTH) == TIM_DMABurstLength_2Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_3Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_4Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_5Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_6Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_7Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_8Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_9Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_10Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_11Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_12Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_13Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_14Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_15Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_16Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_17Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_18Transfers)) +/** + * @} + */ + +/** @defgroup TIM_DMA_sources + * @{ + */ + +#define TIM_DMA_Update ((uint16_t)0x0100) +#define TIM_DMA_CC1 ((uint16_t)0x0200) +#define TIM_DMA_CC2 ((uint16_t)0x0400) +#define TIM_DMA_CC3 ((uint16_t)0x0800) +#define TIM_DMA_CC4 ((uint16_t)0x1000) +#define TIM_DMA_COM ((uint16_t)0x2000) +#define TIM_DMA_Trigger ((uint16_t)0x4000) +#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Prescaler + * @{ + */ + +#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000) +#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000) +#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000) +#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000) +#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_Internal_Trigger_Selection + * @{ + */ + +#define TIM_TS_ITR0 ((uint16_t)0x0000) +#define TIM_TS_ITR1 ((uint16_t)0x0010) +#define TIM_TS_ITR2 ((uint16_t)0x0020) +#define TIM_TS_ITR3 ((uint16_t)0x0030) +#define TIM_TS_TI1F_ED ((uint16_t)0x0040) +#define TIM_TS_TI1FP1 ((uint16_t)0x0050) +#define TIM_TS_TI2FP2 ((uint16_t)0x0060) +#define TIM_TS_ETRF ((uint16_t)0x0070) +#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3) || \ + ((SELECTION) == TIM_TS_TI1F_ED) || \ + ((SELECTION) == TIM_TS_TI1FP1) || \ + ((SELECTION) == TIM_TS_TI2FP2) || \ + ((SELECTION) == TIM_TS_ETRF)) +#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3)) +/** + * @} + */ + +/** @defgroup TIM_TIx_External_Clock_Source + * @{ + */ + +#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050) +#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060) +#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040) + +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Polarity + * @{ + */ +#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000) +#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000) +#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ + ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) +/** + * @} + */ + +/** @defgroup TIM_Prescaler_Reload_Mode + * @{ + */ + +#define TIM_PSCReloadMode_Update ((uint16_t)0x0000) +#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001) +#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ + ((RELOAD) == TIM_PSCReloadMode_Immediate)) +/** + * @} + */ + +/** @defgroup TIM_Forced_Action + * @{ + */ + +#define TIM_ForcedAction_Active ((uint16_t)0x0050) +#define TIM_ForcedAction_InActive ((uint16_t)0x0040) +#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ + ((ACTION) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode + * @{ + */ + +#define TIM_EncoderMode_TI1 ((uint16_t)0x0001) +#define TIM_EncoderMode_TI2 ((uint16_t)0x0002) +#define TIM_EncoderMode_TI12 ((uint16_t)0x0003) +#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ + ((MODE) == TIM_EncoderMode_TI2) || \ + ((MODE) == TIM_EncoderMode_TI12)) +/** + * @} + */ + + +/** @defgroup TIM_Event_Source + * @{ + */ + +#define TIM_EventSource_Update ((uint16_t)0x0001) +#define TIM_EventSource_CC1 ((uint16_t)0x0002) +#define TIM_EventSource_CC2 ((uint16_t)0x0004) +#define TIM_EventSource_CC3 ((uint16_t)0x0008) +#define TIM_EventSource_CC4 ((uint16_t)0x0010) +#define TIM_EventSource_COM ((uint16_t)0x0020) +#define TIM_EventSource_Trigger ((uint16_t)0x0040) +#define TIM_EventSource_Break ((uint16_t)0x0080) +#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_Update_Source + * @{ + */ + +#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow + or the setting of UG bit, or an update generation + through the slave mode controller. */ +#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */ +#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ + ((SOURCE) == TIM_UpdateSource_Regular)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Preload_State + * @{ + */ + +#define TIM_OCPreload_Enable ((uint16_t)0x0008) +#define TIM_OCPreload_Disable ((uint16_t)0x0000) +#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ + ((STATE) == TIM_OCPreload_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Fast_State + * @{ + */ + +#define TIM_OCFast_Enable ((uint16_t)0x0004) +#define TIM_OCFast_Disable ((uint16_t)0x0000) +#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ + ((STATE) == TIM_OCFast_Disable)) + +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Clear_State + * @{ + */ + +#define TIM_OCClear_Enable ((uint16_t)0x0080) +#define TIM_OCClear_Disable ((uint16_t)0x0000) +#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ + ((STATE) == TIM_OCClear_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Output_Source + * @{ + */ + +#define TIM_TRGOSource_Reset ((uint16_t)0x0000) +#define TIM_TRGOSource_Enable ((uint16_t)0x0010) +#define TIM_TRGOSource_Update ((uint16_t)0x0020) +#define TIM_TRGOSource_OC1 ((uint16_t)0x0030) +#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040) +#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050) +#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060) +#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070) +#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ + ((SOURCE) == TIM_TRGOSource_Enable) || \ + ((SOURCE) == TIM_TRGOSource_Update) || \ + ((SOURCE) == TIM_TRGOSource_OC1) || \ + ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC4Ref)) +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode + * @{ + */ + +#define TIM_SlaveMode_Reset ((uint16_t)0x0004) +#define TIM_SlaveMode_Gated ((uint16_t)0x0005) +#define TIM_SlaveMode_Trigger ((uint16_t)0x0006) +#define TIM_SlaveMode_External1 ((uint16_t)0x0007) +#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ + ((MODE) == TIM_SlaveMode_Gated) || \ + ((MODE) == TIM_SlaveMode_Trigger) || \ + ((MODE) == TIM_SlaveMode_External1)) +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode + * @{ + */ + +#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080) +#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000) +#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ + ((STATE) == TIM_MasterSlaveMode_Disable)) +/** + * @} + */ +/** @defgroup TIM_Remap + * @{ + */ + +#define TIM2_TIM8_TRGO ((uint16_t)0x0000) +#define TIM2_ETH_PTP ((uint16_t)0x0400) +#define TIM2_USBFS_SOF ((uint16_t)0x0800) +#define TIM2_USBHS_SOF ((uint16_t)0x0C00) + +#define TIM5_GPIO ((uint16_t)0x0000) +#define TIM5_LSI ((uint16_t)0x0040) +#define TIM5_LSE ((uint16_t)0x0080) +#define TIM5_RTC ((uint16_t)0x00C0) + +#define TIM11_GPIO ((uint16_t)0x0000) +#define TIM11_HSE ((uint16_t)0x0002) + +#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM2_TIM8_TRGO)||\ + ((TIM_REMAP) == TIM2_ETH_PTP)||\ + ((TIM_REMAP) == TIM2_USBFS_SOF)||\ + ((TIM_REMAP) == TIM2_USBHS_SOF)||\ + ((TIM_REMAP) == TIM5_GPIO)||\ + ((TIM_REMAP) == TIM5_LSI)||\ + ((TIM_REMAP) == TIM5_LSE)||\ + ((TIM_REMAP) == TIM5_RTC)||\ + ((TIM_REMAP) == TIM11_GPIO)||\ + ((TIM_REMAP) == TIM11_HSE)) + +/** + * @} + */ +/** @defgroup TIM_Flags + * @{ + */ + +#define TIM_FLAG_Update ((uint16_t)0x0001) +#define TIM_FLAG_CC1 ((uint16_t)0x0002) +#define TIM_FLAG_CC2 ((uint16_t)0x0004) +#define TIM_FLAG_CC3 ((uint16_t)0x0008) +#define TIM_FLAG_CC4 ((uint16_t)0x0010) +#define TIM_FLAG_COM ((uint16_t)0x0020) +#define TIM_FLAG_Trigger ((uint16_t)0x0040) +#define TIM_FLAG_Break ((uint16_t)0x0080) +#define TIM_FLAG_CC1OF ((uint16_t)0x0200) +#define TIM_FLAG_CC2OF ((uint16_t)0x0400) +#define TIM_FLAG_CC3OF ((uint16_t)0x0800) +#define TIM_FLAG_CC4OF ((uint16_t)0x1000) +#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ + ((FLAG) == TIM_FLAG_CC1) || \ + ((FLAG) == TIM_FLAG_CC2) || \ + ((FLAG) == TIM_FLAG_CC3) || \ + ((FLAG) == TIM_FLAG_CC4) || \ + ((FLAG) == TIM_FLAG_COM) || \ + ((FLAG) == TIM_FLAG_Trigger) || \ + ((FLAG) == TIM_FLAG_Break) || \ + ((FLAG) == TIM_FLAG_CC1OF) || \ + ((FLAG) == TIM_FLAG_CC2OF) || \ + ((FLAG) == TIM_FLAG_CC3OF) || \ + ((FLAG) == TIM_FLAG_CC4OF)) + +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Filer_Value + * @{ + */ + +#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Filter + * @{ + */ + +#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_Legacy + * @{ + */ + +#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer +#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers +#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers +#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers +#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers +#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers +#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers +#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers +#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers +#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers +#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers +#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers +#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers +#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers +#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers +#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers +#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers +#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* TimeBase management ********************************************************/ +void TIM_DeInit(TIM_TypeDef* TIMx); +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode); +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode); +void TIM_SetCounter(TIM_TypeDef* TIMx, uint32_t Counter); +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint32_t Autoreload); +uint32_t TIM_GetCounter(TIM_TypeDef* TIMx); +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx); +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource); +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode); +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD); +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); + +/* Output Compare management **************************************************/ +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode); +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint32_t Compare1); +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint32_t Compare2); +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint32_t Compare3); +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint32_t Compare4); +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx); +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN); + +/* Input Capture management ***************************************************/ +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +uint32_t TIM_GetCapture1(TIM_TypeDef* TIMx); +uint32_t TIM_GetCapture2(TIM_TypeDef* TIMx); +uint32_t TIM_GetCapture3(TIM_TypeDef* TIMx); +uint32_t TIM_GetCapture4(TIM_TypeDef* TIMx); +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); + +/* Advanced-control timers (TIM1 and TIM8) specific features ******************/ +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); + +/* Interrupts, DMA and flags management ***************************************/ +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState); +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource); +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT); +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT); +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength); +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState); +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); + +/* Clocks management **********************************************************/ +void TIM_InternalClockConfig(TIM_TypeDef* TIMx); +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter); +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); + +/* Synchronization management *************************************************/ +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); + +/* Specific interface management **********************************************/ +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity); +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); + +/* Specific remapping management **********************************************/ +void TIM_RemapConfig(TIM_TypeDef* TIMx, uint16_t TIM_Remap); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_TIM_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_usart.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_usart.c new file mode 100644 index 00000000000..5dcbcbc4dc2 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_usart.c @@ -0,0 +1,1464 @@ +/** + ****************************************************************************** + * @file stm32f4xx_usart.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Universal synchronous asynchronous receiver + * transmitter (USART): + * - Initialization and Configuration + * - Data transfers + * - Multi-Processor Communication + * - LIN mode + * - Half-duplex mode + * - Smartcard mode + * - IrDA mode + * - DMA transfers management + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. Enable peripheral clock using the follwoing functions + * RCC_APB2PeriphClockCmd(RCC_APB2Periph_USARTx, ENABLE) for USART1 and USART6 + * RCC_APB1PeriphClockCmd(RCC_APB1Periph_USARTx, ENABLE) for USART2, USART3, UART4 or UART5. + * + * 2. According to the USART mode, enable the GPIO clocks using + * RCC_AHB1PeriphClockCmd() function. (The I/O can be TX, RX, CTS, + * or/and SCLK). + * + * 3. Peripheral's alternate function: + * - Connect the pin to the desired peripherals' Alternate + * Function (AF) using GPIO_PinAFConfig() function + * - Configure the desired pin in alternate function by: + * GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF + * - Select the type, pull-up/pull-down and output speed via + * GPIO_PuPd, GPIO_OType and GPIO_Speed members + * - Call GPIO_Init() function + * + * 4. Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware + * flow control and Mode(Receiver/Transmitter) using the USART_Init() + * function. + * + * 5. For synchronous mode, enable the clock and program the polarity, + * phase and last bit using the USART_ClockInit() function. + * + * 5. Enable the NVIC and the corresponding interrupt using the function + * USART_ITConfig() if you need to use interrupt mode. + * + * 6. When using the DMA mode + * - Configure the DMA using DMA_Init() function + * - Active the needed channel Request using USART_DMACmd() function + * + * 7. Enable the USART using the USART_Cmd() function. + * + * 8. Enable the DMA using the DMA_Cmd() function, when using DMA mode. + * + * Refer to Multi-Processor, LIN, half-duplex, Smartcard, IrDA sub-sections + * for more details + * + * In order to reach higher communication baudrates, it is possible to + * enable the oversampling by 8 mode using the function USART_OverSampling8Cmd(). + * This function should be called after enabling the USART clock (RCC_APBxPeriphClockCmd()) + * and before calling the function USART_Init(). + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_usart.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup USART + * @brief USART driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/*!< USART CR1 register clear Mask ((~(uint16_t)0xE9F3)) */ +#define CR1_CLEAR_MASK ((uint16_t)(USART_CR1_M | USART_CR1_PCE | \ + USART_CR1_PS | USART_CR1_TE | \ + USART_CR1_RE)) + +/*!< USART CR2 register clock bits clear Mask ((~(uint16_t)0xF0FF)) */ +#define CR2_CLOCK_CLEAR_MASK ((uint16_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \ + USART_CR2_CPHA | USART_CR2_LBCL)) + +/*!< USART CR3 register clear Mask ((~(uint16_t)0xFCFF)) */ +#define CR3_CLEAR_MASK ((uint16_t)(USART_CR3_RTSE | USART_CR3_CTSE)) + +/*!< USART Interrupts mask */ +#define IT_MASK ((uint16_t)0x001F) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup USART_Private_Functions + * @{ + */ + +/** @defgroup USART_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + Initialization and Configuration functions + =============================================================================== + + This subsection provides a set of functions allowing to initialize the USART + in asynchronous and in synchronous modes. + - For the asynchronous mode only these parameters can be configured: + - Baud Rate + - Word Length + - Stop Bit + - Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + Depending on the frame length defined by the M bit (8-bits or 9-bits), + the possible USART frame formats are as listed in the following table: + +-------------------------------------------------------------+ + | M bit | PCE bit | USART frame | + |---------------------|---------------------------------------| + | 0 | 0 | | SB | 8 bit data | STB | | + |---------|-----------|---------------------------------------| + | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|-----------|---------------------------------------| + | 1 | 0 | | SB | 9 bit data | STB | | + |---------|-----------|---------------------------------------| + | 1 | 1 | | SB | 8 bit data | PB | STB | | + +-------------------------------------------------------------+ + - Hardware flow control + - Receiver/transmitter modes + + The USART_Init() function follows the USART asynchronous configuration procedure + (details for the procedure are available in reference manual (RM0090)). + + - For the synchronous mode in addition to the asynchronous mode parameters these + parameters should be also configured: + - USART Clock Enabled + - USART polarity + - USART phase + - USART LastBit + + These parameters can be configured using the USART_ClockInit() function. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the USARTx peripheral registers to their default reset values. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @retval None + */ +void USART_DeInit(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + if (USARTx == USART1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); + } + else if (USARTx == USART2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); + } + else if (USARTx == USART3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); + } + else if (USARTx == UART4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); + } + else if (USARTx == UART5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); + } + else + { + if (USARTx == USART6) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART6, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART6, DISABLE); + } + } +} + +/** + * @brief Initializes the USARTx peripheral according to the specified + * parameters in the USART_InitStruct . + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure that contains + * the configuration information for the specified USART peripheral. + * @retval None + */ +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) +{ + uint32_t tmpreg = 0x00, apbclock = 0x00; + uint32_t integerdivider = 0x00; + uint32_t fractionaldivider = 0x00; + RCC_ClocksTypeDef RCC_ClocksStatus; + + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); + assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); + assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); + assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); + assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); + assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); + + /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */ + if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) + { + assert_param(IS_USART_1236_PERIPH(USARTx)); + } + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + + /* Clear STOP[13:12] bits */ + tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP); + + /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit : + Set STOP[13:12] bits according to USART_StopBits value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; + + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; + +/*---------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = USARTx->CR1; + + /* Clear M, PCE, PS, TE and RE bits */ + tmpreg &= (uint32_t)~((uint32_t)CR1_CLEAR_MASK); + + /* Configure the USART Word Length, Parity and mode: + Set the M bits according to USART_WordLength value + Set PCE and PS bits according to USART_Parity value + Set TE and RE bits according to USART_Mode value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | + USART_InitStruct->USART_Mode; + + /* Write to USART CR1 */ + USARTx->CR1 = (uint16_t)tmpreg; + +/*---------------------------- USART CR3 Configuration -----------------------*/ + tmpreg = USARTx->CR3; + + /* Clear CTSE and RTSE bits */ + tmpreg &= (uint32_t)~((uint32_t)CR3_CLEAR_MASK); + + /* Configure the USART HFC : + Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ + tmpreg |= USART_InitStruct->USART_HardwareFlowControl; + + /* Write to USART CR3 */ + USARTx->CR3 = (uint16_t)tmpreg; + +/*---------------------------- USART BRR Configuration -----------------------*/ + /* Configure the USART Baud Rate */ + RCC_GetClocksFreq(&RCC_ClocksStatus); + + if ((USARTx == USART1) || (USARTx == USART6)) + { + apbclock = RCC_ClocksStatus.PCLK2_Frequency; + } + else + { + apbclock = RCC_ClocksStatus.PCLK1_Frequency; + } + + /* Determine the integer part */ + if ((USARTx->CR1 & USART_CR1_OVER8) != 0) + { + /* Integer part computing in case Oversampling mode is 8 Samples */ + integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate))); + } + else /* if ((USARTx->CR1 & USART_CR1_OVER8) == 0) */ + { + /* Integer part computing in case Oversampling mode is 16 Samples */ + integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate))); + } + tmpreg = (integerdivider / 100) << 4; + + /* Determine the fractional part */ + fractionaldivider = integerdivider - (100 * (tmpreg >> 4)); + + /* Implement the fractional part in the register */ + if ((USARTx->CR1 & USART_CR1_OVER8) != 0) + { + tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07); + } + else /* if ((USARTx->CR1 & USART_CR1_OVER8) == 0) */ + { + tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F); + } + + /* Write to USART BRR register */ + USARTx->BRR = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_InitStruct member with its default value. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void USART_StructInit(USART_InitTypeDef* USART_InitStruct) +{ + /* USART_InitStruct members default value */ + USART_InitStruct->USART_BaudRate = 9600; + USART_InitStruct->USART_WordLength = USART_WordLength_8b; + USART_InitStruct->USART_StopBits = USART_StopBits_1; + USART_InitStruct->USART_Parity = USART_Parity_No ; + USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; +} + +/** + * @brief Initializes the USARTx peripheral Clock according to the + * specified parameters in the USART_ClockInitStruct . + * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART peripheral. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef structure that + * contains the configuration information for the specified USART peripheral. + * @note The Smart Card and Synchronous modes are not available for UART4 and UART5. + * @retval None + */ +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + uint32_t tmpreg = 0x00; + /* Check the parameters */ + assert_param(IS_USART_1236_PERIPH(USARTx)); + assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); + assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); + assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); + assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear CLKEN, CPOL, CPHA and LBCL bits */ + tmpreg &= (uint32_t)~((uint32_t)CR2_CLOCK_CLEAR_MASK); + /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ + /* Set CLKEN bit according to USART_Clock value */ + /* Set CPOL bit according to USART_CPOL value */ + /* Set CPHA bit according to USART_CPHA value */ + /* Set LBCL bit according to USART_LastBit value */ + tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | + USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_ClockInitStruct member with its default value. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef structure + * which will be initialized. + * @retval None + */ +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + /* USART_ClockInitStruct members default value */ + USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; + USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; + USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; + USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; +} + +/** + * @brief Enables or disables the specified USART peripheral. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param NewState: new state of the USARTx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected USART by setting the UE bit in the CR1 register */ + USARTx->CR1 |= USART_CR1_UE; + } + else + { + /* Disable the selected USART by clearing the UE bit in the CR1 register */ + USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_UE); + } +} + +/** + * @brief Sets the system clock prescaler. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_Prescaler: specifies the prescaler clock. + * @note The function is used for IrDA mode with UART4 and UART5. + * @retval None + */ +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Clear the USART prescaler */ + USARTx->GTPR &= USART_GTPR_GT; + /* Set the USART prescaler */ + USARTx->GTPR |= USART_Prescaler; +} + +/** + * @brief Enables or disables the USART's 8x oversampling mode. + * @note This function has to be called before calling USART_Init() function + * in order to have correct baudrate Divider value. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param NewState: new state of the USART 8x oversampling mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */ + USARTx->CR1 |= USART_CR1_OVER8; + } + else + { + /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */ + USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_OVER8); + } +} + +/** + * @brief Enables or disables the USART's one bit sampling method. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_ONEBIT; + } + else + { + /* Disable the one bit method by clearing the ONEBITE bit in the CR3 register */ + USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT); + } +} + +/** + * @} + */ + +/** @defgroup USART_Group2 Data transfers functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + Data transfers functions + =============================================================================== + + This subsection provides a set of functions allowing to manage the USART data + transfers. + + During an USART reception, data shifts in least significant bit first through + the RX pin. In this mode, the USART_DR register consists of a buffer (RDR) + between the internal bus and the received shift register. + + When a transmission is taking place, a write instruction to the USART_DR register + stores the data in the TDR register and which is copied in the shift register + at the end of the current transmission. + + The read access of the USART_DR register can be done using the USART_ReceiveData() + function and returns the RDR buffered value. Whereas a write access to the USART_DR + can be done using USART_SendData() function and stores the written data into + TDR buffer. + +@endverbatim + * @{ + */ + +/** + * @brief Transmits single data through the USARTx peripheral. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param Data: the data to transmit. + * @retval None + */ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DATA(Data)); + + /* Transmit Data */ + USARTx->DR = (Data & (uint16_t)0x01FF); +} + +/** + * @brief Returns the most recent received data by the USARTx peripheral. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @retval The received data. + */ +uint16_t USART_ReceiveData(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Receive Data */ + return (uint16_t)(USARTx->DR & (uint16_t)0x01FF); +} + +/** + * @} + */ + +/** @defgroup USART_Group3 MultiProcessor Communication functions + * @brief Multi-Processor Communication functions + * +@verbatim + =============================================================================== + Multi-Processor Communication functions + =============================================================================== + + This subsection provides a set of functions allowing to manage the USART + multiprocessor communication. + + For instance one of the USARTs can be the master, its TX output is connected to + the RX input of the other USART. The others are slaves, their respective TX outputs + are logically ANDed together and connected to the RX input of the master. + + USART multiprocessor communication is possible through the following procedure: + 1. Program the Baud rate, Word length = 9 bits, Stop bits, Parity, Mode transmitter + or Mode receiver and hardware flow control values using the USART_Init() + function. + 2. Configures the USART address using the USART_SetAddress() function. + 3. Configures the wake up method (USART_WakeUp_IdleLine or USART_WakeUp_AddressMark) + using USART_WakeUpConfig() function only for the slaves. + 4. Enable the USART using the USART_Cmd() function. + 5. Enter the USART slaves in mute mode using USART_ReceiverWakeUpCmd() function. + + The USART Slave exit from mute mode when receive the wake up condition. + +@endverbatim + * @{ + */ + +/** + * @brief Sets the address of the USART node. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_Address: Indicates the address of the USART node. + * @retval None + */ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_ADDRESS(USART_Address)); + + /* Clear the USART address */ + USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_ADD); + /* Set the USART address node */ + USARTx->CR2 |= USART_Address; +} + +/** + * @brief Determines if the USART is in mute mode or not. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param NewState: new state of the USART mute mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ + USARTx->CR1 |= USART_CR1_RWU; + } + else + { + /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ + USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_RWU); + } +} +/** + * @brief Selects the USART WakeUp method. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_WakeUp: specifies the USART wakeup method. + * This parameter can be one of the following values: + * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection + * @arg USART_WakeUp_AddressMark: WakeUp by an address mark + * @retval None + */ +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_WAKEUP(USART_WakeUp)); + + USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_WAKE); + USARTx->CR1 |= USART_WakeUp; +} + +/** + * @} + */ + +/** @defgroup USART_Group4 LIN mode functions + * @brief LIN mode functions + * +@verbatim + =============================================================================== + LIN mode functions + =============================================================================== + + This subsection provides a set of functions allowing to manage the USART LIN + Mode communication. + + In LIN mode, 8-bit data format with 1 stop bit is required in accordance with + the LIN standard. + + Only this LIN Feature is supported by the USART IP: + - LIN Master Synchronous Break send capability and LIN slave break detection + capability : 13-bit break generation and 10/11 bit break detection + + + USART LIN Master transmitter communication is possible through the following procedure: + 1. Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity, + Mode transmitter or Mode receiver and hardware flow control values using + the USART_Init() function. + 2. Enable the USART using the USART_Cmd() function. + 3. Enable the LIN mode using the USART_LINCmd() function. + 4. Send the break character using USART_SendBreak() function. + + USART LIN Master receiver communication is possible through the following procedure: + 1. Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity, + Mode transmitter or Mode receiver and hardware flow control values using + the USART_Init() function. + 2. Enable the USART using the USART_Cmd() function. + 3. Configures the break detection length using the USART_LINBreakDetectLengthConfig() + function. + 4. Enable the LIN mode using the USART_LINCmd() function. + + +@note In LIN mode, the following bits must be kept cleared: + - CLKEN in the USART_CR2 register, + - STOP[1:0], SCEN, HDSEL and IREN in the USART_CR3 register. + +@endverbatim + * @{ + */ + +/** + * @brief Sets the USART LIN Break detection length. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_LINBreakDetectLength: specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg USART_LINBreakDetectLength_10b: 10-bit break detection + * @arg USART_LINBreakDetectLength_11b: 11-bit break detection + * @retval None + */ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); + + USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_LBDL); + USARTx->CR2 |= USART_LINBreakDetectLength; +} + +/** + * @brief Enables or disables the USART's LIN mode. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param NewState: new state of the USART LIN mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + USARTx->CR2 |= USART_CR2_LINEN; + } + else + { + /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ + USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_LINEN); + } +} + +/** + * @brief Transmits break characters. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @retval None + */ +void USART_SendBreak(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Send break characters */ + USARTx->CR1 |= USART_CR1_SBK; +} + +/** + * @} + */ + +/** @defgroup USART_Group5 Halfduplex mode function + * @brief Half-duplex mode function + * +@verbatim + =============================================================================== + Half-duplex mode function + =============================================================================== + + This subsection provides a set of functions allowing to manage the USART + Half-duplex communication. + + The USART can be configured to follow a single-wire half-duplex protocol where + the TX and RX lines are internally connected. + + USART Half duplex communication is possible through the following procedure: + 1. Program the Baud rate, Word length, Stop bits, Parity, Mode transmitter + or Mode receiver and hardware flow control values using the USART_Init() + function. + 2. Configures the USART address using the USART_SetAddress() function. + 3. Enable the USART using the USART_Cmd() function. + 4. Enable the half duplex mode using USART_HalfDuplexCmd() function. + + +@note The RX pin is no longer used +@note In Half-duplex mode the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register. + - SCEN and IREN bits in the USART_CR3 register. + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the USART's Half Duplex communication. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param NewState: new state of the USART Communication. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_HDSEL; + } + else + { + /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ + USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_HDSEL); + } +} + +/** + * @} + */ + + +/** @defgroup USART_Group6 Smartcard mode functions + * @brief Smartcard mode functions + * +@verbatim + =============================================================================== + Smartcard mode functions + =============================================================================== + + This subsection provides a set of functions allowing to manage the USART + Smartcard communication. + + The Smartcard interface is designed to support asynchronous protocol Smartcards as + defined in the ISO 7816-3 standard. + + The USART can provide a clock to the smartcard through the SCLK output. + In smartcard mode, SCLK is not associated to the communication but is simply derived + from the internal peripheral input clock through a 5-bit prescaler. + + Smartcard communication is possible through the following procedure: + 1. Configures the Smartcard Prescaler using the USART_SetPrescaler() function. + 2. Configures the Smartcard Guard Time using the USART_SetGuardTime() function. + 3. Program the USART clock using the USART_ClockInit() function as following: + - USART Clock enabled + - USART CPOL Low + - USART CPHA on first edge + - USART Last Bit Clock Enabled + 4. Program the Smartcard interface using the USART_Init() function as following: + - Word Length = 9 Bits + - 1.5 Stop Bit + - Even parity + - BaudRate = 12096 baud + - Hardware flow control disabled (RTS and CTS signals) + - Tx and Rx enabled + 5. Optionally you can enable the parity error interrupt using the USART_ITConfig() + function + 6. Enable the USART using the USART_Cmd() function. + 7. Enable the Smartcard NACK using the USART_SmartCardNACKCmd() function. + 8. Enable the Smartcard interface using the USART_SmartCardCmd() function. + + Please refer to the ISO 7816-3 specification for more details. + + +@note It is also possible to choose 0.5 stop bit for receiving but it is recommended + to use 1.5 stop bits for both transmitting and receiving to avoid switching + between the two configurations. +@note In smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register. + - HDSEL and IREN bits in the USART_CR3 register. +@note Smartcard mode is available on USART peripherals only (not available on UART4 + and UART5 peripherals). + +@endverbatim + * @{ + */ + +/** + * @brief Sets the specified USART guard time. + * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART or + * UART peripheral. + * @param USART_GuardTime: specifies the guard time. + * @retval None + */ +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) +{ + /* Check the parameters */ + assert_param(IS_USART_1236_PERIPH(USARTx)); + + /* Clear the USART Guard time */ + USARTx->GTPR &= USART_GTPR_PSC; + /* Set the USART guard time */ + USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); +} + +/** + * @brief Enables or disables the USART's Smart Card mode. + * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART or + * UART peripheral. + * @param NewState: new state of the Smart Card mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_1236_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the SC mode by setting the SCEN bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_SCEN; + } + else + { + /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ + USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_SCEN); + } +} + +/** + * @brief Enables or disables NACK transmission. + * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART or + * UART peripheral. + * @param NewState: new state of the NACK transmission. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_1236_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_NACK; + } + else + { + /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ + USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_NACK); + } +} + +/** + * @} + */ + +/** @defgroup USART_Group7 IrDA mode functions + * @brief IrDA mode functions + * +@verbatim + =============================================================================== + IrDA mode functions + =============================================================================== + + This subsection provides a set of functions allowing to manage the USART + IrDA communication. + + IrDA is a half duplex communication protocol. If the Transmitter is busy, any data + on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver + is busy, data on the TX from the USART to IrDA will not be encoded by IrDA. + While receiving data, transmission should be avoided as the data to be transmitted + could be corrupted. + + IrDA communication is possible through the following procedure: + 1. Program the Baud rate, Word length = 8 bits, Stop bits, Parity, Transmitter/Receiver + modes and hardware flow control values using the USART_Init() function. + 2. Enable the USART using the USART_Cmd() function. + 3. Configures the IrDA pulse width by configuring the prescaler using + the USART_SetPrescaler() function. + 4. Configures the IrDA USART_IrDAMode_LowPower or USART_IrDAMode_Normal mode + using the USART_IrDAConfig() function. + 5. Enable the IrDA using the USART_IrDACmd() function. + +@note A pulse of width less than two and greater than one PSC period(s) may or may + not be rejected. +@note The receiver set up time should be managed by software. The IrDA physical layer + specification specifies a minimum of 10 ms delay between transmission and + reception (IrDA is a half duplex protocol). +@note In IrDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register. + - SCEN and HDSEL bits in the USART_CR3 register. + +@endverbatim + * @{ + */ + +/** + * @brief Configures the USART's IrDA interface. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_IrDAMode: specifies the IrDA mode. + * This parameter can be one of the following values: + * @arg USART_IrDAMode_LowPower + * @arg USART_IrDAMode_Normal + * @retval None + */ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); + + USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_IRLP); + USARTx->CR3 |= USART_IrDAMode; +} + +/** + * @brief Enables or disables the USART's IrDA interface. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param NewState: new state of the IrDA mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ + USARTx->CR3 |= USART_CR3_IREN; + } + else + { + /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ + USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_IREN); + } +} + +/** + * @} + */ + +/** @defgroup USART_Group8 DMA transfers management functions + * @brief DMA transfers management functions + * +@verbatim + =============================================================================== + DMA transfers management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the USART's DMA interface. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_DMAReq: specifies the DMA request. + * This parameter can be any combination of the following values: + * @arg USART_DMAReq_Tx: USART DMA transmit request + * @arg USART_DMAReq_Rx: USART DMA receive request + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DMAREQ(USART_DMAReq)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DMA transfer for selected requests by setting the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 |= USART_DMAReq; + } + else + { + /* Disable the DMA transfer for selected requests by clearing the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 &= (uint16_t)~USART_DMAReq; + } +} + +/** + * @} + */ + +/** @defgroup USART_Group9 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + + This subsection provides a set of functions allowing to configure the USART + Interrupts sources, DMA channels requests and check or clear the flags or + pending bits status. + The user should identify which mode will be used in his application to manage + the communication: Polling mode, Interrupt mode or DMA mode. + + Polling Mode + ============= + In Polling Mode, the SPI communication can be managed by 10 flags: + 1. USART_FLAG_TXE : to indicate the status of the transmit buffer register + 2. USART_FLAG_RXNE : to indicate the status of the receive buffer register + 3. USART_FLAG_TC : to indicate the status of the transmit operation + 4. USART_FLAG_IDLE : to indicate the status of the Idle Line + 5. USART_FLAG_CTS : to indicate the status of the nCTS input + 6. USART_FLAG_LBD : to indicate the status of the LIN break detection + 7. USART_FLAG_NE : to indicate if a noise error occur + 8. USART_FLAG_FE : to indicate if a frame error occur + 9. USART_FLAG_PE : to indicate if a parity error occur + 10. USART_FLAG_ORE : to indicate if an Overrun error occur + + In this Mode it is advised to use the following functions: + - FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); + - void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); + + Interrupt Mode + =============== + In Interrupt Mode, the USART communication can be managed by 8 interrupt sources + and 10 pending bits: + + Pending Bits: + ------------- + 1. USART_IT_TXE : to indicate the status of the transmit buffer register + 2. USART_IT_RXNE : to indicate the status of the receive buffer register + 3. USART_IT_TC : to indicate the status of the transmit operation + 4. USART_IT_IDLE : to indicate the status of the Idle Line + 5. USART_IT_CTS : to indicate the status of the nCTS input + 6. USART_IT_LBD : to indicate the status of the LIN break detection + 7. USART_IT_NE : to indicate if a noise error occur + 8. USART_IT_FE : to indicate if a frame error occur + 9. USART_IT_PE : to indicate if a parity error occur + 10. USART_IT_ORE : to indicate if an Overrun error occur + + Interrupt Source: + ----------------- + 1. USART_IT_TXE : specifies the interrupt source for the Tx buffer empty + interrupt. + 2. USART_IT_RXNE : specifies the interrupt source for the Rx buffer not + empty interrupt. + 3. USART_IT_TC : specifies the interrupt source for the Transmit complete + interrupt. + 4. USART_IT_IDLE : specifies the interrupt source for the Idle Line interrupt. + 5. USART_IT_CTS : specifies the interrupt source for the CTS interrupt. + 6. USART_IT_LBD : specifies the interrupt source for the LIN break detection + interrupt. + 7. USART_IT_PE : specifies the interrupt source for the parity error interrupt. + 8. USART_IT_ERR : specifies the interrupt source for the errors interrupt. + +@note Some parameters are coded in order to use them as interrupt source or as pending bits. + + In this Mode it is advised to use the following functions: + - void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); + - ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); + - void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); + + DMA Mode + ======== + In DMA Mode, the USART communication can be managed by 2 DMA Channel requests: + 1. USART_DMAReq_Tx: specifies the Tx buffer DMA transfer request + 2. USART_DMAReq_Rx: specifies the Rx buffer DMA transfer request + + In this Mode it is advised to use the following function: + - void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified USART interrupts. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @param NewState: new state of the specified USARTx interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState) +{ + uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; + uint32_t usartxbase = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CONFIG_IT(USART_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_1236_PERIPH(USARTx)); + } + + usartxbase = (uint32_t)USARTx; + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + + /* Get the interrupt position */ + itpos = USART_IT & IT_MASK; + itmask = (((uint32_t)0x01) << itpos); + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + usartxbase += 0x0C; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + usartxbase += 0x10; + } + else /* The IT is in CR3 register */ + { + usartxbase += 0x14; + } + if (NewState != DISABLE) + { + *(__IO uint32_t*)usartxbase |= itmask; + } + else + { + *(__IO uint32_t*)usartxbase &= ~itmask; + } +} + +/** + * @brief Checks whether the specified USART flag is set or not. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) + * @arg USART_FLAG_LBD: LIN Break detection flag + * @arg USART_FLAG_TXE: Transmit data register empty flag + * @arg USART_FLAG_TC: Transmission Complete flag + * @arg USART_FLAG_RXNE: Receive data register not empty flag + * @arg USART_FLAG_IDLE: Idle Line detection flag + * @arg USART_FLAG_ORE: OverRun Error flag + * @arg USART_FLAG_NE: Noise Error flag + * @arg USART_FLAG_FE: Framing Error flag + * @arg USART_FLAG_PE: Parity Error flag + * @retval The new state of USART_FLAG (SET or RESET). + */ +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_FLAG(USART_FLAG)); + + /* The CTS flag is not available for UART4 and UART5 */ + if (USART_FLAG == USART_FLAG_CTS) + { + assert_param(IS_USART_1236_PERIPH(USARTx)); + } + + if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the USARTx's pending flags. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). + * @arg USART_FLAG_LBD: LIN Break detection flag. + * @arg USART_FLAG_TC: Transmission Complete flag. + * @arg USART_FLAG_RXNE: Receive data register not empty flag. + * + * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register (USART_GetFlagStatus()) + * followed by a read operation to USART_DR register (USART_ReceiveData()). + * @note RXNE flag can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * @note TC flag can be also cleared by software sequence: a read operation to + * USART_SR register (USART_GetFlagStatus()) followed by a write operation + * to USART_DR register (USART_SendData()). + * @note TXE flag is cleared only by a write to the USART_DR register + * (USART_SendData()). + * + * @retval None + */ +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); + + /* The CTS flag is not available for UART4 and UART5 */ + if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS) + { + assert_param(IS_USART_1236_PERIPH(USARTx)); + } + + USARTx->SR = (uint16_t)~USART_FLAG; +} + +/** + * @brief Checks whether the specified USART interrupt has occurred or not. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_IT: specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_ORE_RX : OverRun Error interrupt if the RXNEIE bit is set + * @arg USART_IT_ORE_ER : OverRun Error interrupt if the EIE bit is set + * @arg USART_IT_NE: Noise Error interrupt + * @arg USART_IT_FE: Framing Error interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @retval The new state of USART_IT (SET or RESET). + */ +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_GET_IT(USART_IT)); + + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_1236_PERIPH(USARTx)); + } + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + /* Get the interrupt position */ + itmask = USART_IT & IT_MASK; + itmask = (uint32_t)0x01 << itmask; + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + itmask &= USARTx->CR1; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + itmask &= USARTx->CR2; + } + else /* The IT is in CR3 register */ + { + itmask &= USARTx->CR3; + } + + bitpos = USART_IT >> 0x08; + bitpos = (uint32_t)0x01 << bitpos; + bitpos &= USARTx->SR; + if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/** + * @brief Clears the USARTx's interrupt pending bits. + * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or + * UART peripheral. + * @param USART_IT: specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TC: Transmission complete interrupt. + * @arg USART_IT_RXNE: Receive Data register not empty interrupt. + * + * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) pending bits are cleared by + * software sequence: a read operation to USART_SR register + * (USART_GetITStatus()) followed by a read operation to USART_DR register + * (USART_ReceiveData()). + * @note RXNE pending bit can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * @note TC pending bit can be also cleared by software sequence: a read + * operation to USART_SR register (USART_GetITStatus()) followed by a write + * operation to USART_DR register (USART_SendData()). + * @note TXE pending bit is cleared only by a write to the USART_DR register + * (USART_SendData()). + * + * @retval None + */ +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint16_t bitpos = 0x00, itmask = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_IT(USART_IT)); + + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_1236_PERIPH(USARTx)); + } + + bitpos = USART_IT >> 0x08; + itmask = ((uint16_t)0x01 << (uint16_t)bitpos); + USARTx->SR = (uint16_t)~itmask; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_usart.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_usart.h new file mode 100644 index 00000000000..3a411228f76 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_usart.h @@ -0,0 +1,423 @@ +/** + ****************************************************************************** + * @file stm32f4xx_usart.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the USART + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_USART_H +#define __STM32F4xx_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief USART Init Structure definition + */ + +typedef struct +{ + uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (USART_InitStruct->USART_BaudRate))) + - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 + Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ + + uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint16_t USART_Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref USART_Hardware_Flow_Control */ +} USART_InitTypeDef; + +/** + * @brief USART Clock Init Structure definition + */ + +typedef struct +{ + + uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_Clock */ + + uint16_t USART_CPOL; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +} USART_ClockInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Constants + * @{ + */ + +#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4) || \ + ((PERIPH) == UART5) || \ + ((PERIPH) == USART6)) + +#define IS_USART_1236_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == USART6)) + +/** @defgroup USART_Word_Length + * @{ + */ + +#define USART_WordLength_8b ((uint16_t)0x0000) +#define USART_WordLength_9b ((uint16_t)0x1000) + +#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ + ((LENGTH) == USART_WordLength_9b)) +/** + * @} + */ + +/** @defgroup USART_Stop_Bits + * @{ + */ + +#define USART_StopBits_1 ((uint16_t)0x0000) +#define USART_StopBits_0_5 ((uint16_t)0x1000) +#define USART_StopBits_2 ((uint16_t)0x2000) +#define USART_StopBits_1_5 ((uint16_t)0x3000) +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ + ((STOPBITS) == USART_StopBits_0_5) || \ + ((STOPBITS) == USART_StopBits_2) || \ + ((STOPBITS) == USART_StopBits_1_5)) +/** + * @} + */ + +/** @defgroup USART_Parity + * @{ + */ + +#define USART_Parity_No ((uint16_t)0x0000) +#define USART_Parity_Even ((uint16_t)0x0400) +#define USART_Parity_Odd ((uint16_t)0x0600) +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ + ((PARITY) == USART_Parity_Even) || \ + ((PARITY) == USART_Parity_Odd)) +/** + * @} + */ + +/** @defgroup USART_Mode + * @{ + */ + +#define USART_Mode_Rx ((uint16_t)0x0004) +#define USART_Mode_Tx ((uint16_t)0x0008) +#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) +/** + * @} + */ + +/** @defgroup USART_Hardware_Flow_Control + * @{ + */ +#define USART_HardwareFlowControl_None ((uint16_t)0x0000) +#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) +#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) +#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) +#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == USART_HardwareFlowControl_None) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS) || \ + ((CONTROL) == USART_HardwareFlowControl_CTS) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) +/** + * @} + */ + +/** @defgroup USART_Clock + * @{ + */ +#define USART_Clock_Disable ((uint16_t)0x0000) +#define USART_Clock_Enable ((uint16_t)0x0800) +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ + ((CLOCK) == USART_Clock_Enable)) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity + * @{ + */ + +#define USART_CPOL_Low ((uint16_t)0x0000) +#define USART_CPOL_High ((uint16_t)0x0400) +#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) + +/** + * @} + */ + +/** @defgroup USART_Clock_Phase + * @{ + */ + +#define USART_CPHA_1Edge ((uint16_t)0x0000) +#define USART_CPHA_2Edge ((uint16_t)0x0200) +#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) + +/** + * @} + */ + +/** @defgroup USART_Last_Bit + * @{ + */ + +#define USART_LastBit_Disable ((uint16_t)0x0000) +#define USART_LastBit_Enable ((uint16_t)0x0100) +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ + ((LASTBIT) == USART_LastBit_Enable)) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition + * @{ + */ + +#define USART_IT_PE ((uint16_t)0x0028) +#define USART_IT_TXE ((uint16_t)0x0727) +#define USART_IT_TC ((uint16_t)0x0626) +#define USART_IT_RXNE ((uint16_t)0x0525) +#define USART_IT_ORE_RX ((uint16_t)0x0325) /* In case interrupt is generated if the RXNEIE bit is set */ +#define USART_IT_IDLE ((uint16_t)0x0424) +#define USART_IT_LBD ((uint16_t)0x0846) +#define USART_IT_CTS ((uint16_t)0x096A) +#define USART_IT_ERR ((uint16_t)0x0060) +#define USART_IT_ORE_ER ((uint16_t)0x0360) /* In case interrupt is generated if the EIE bit is set */ +#define USART_IT_NE ((uint16_t)0x0260) +#define USART_IT_FE ((uint16_t)0x0160) + +/** @defgroup USART_Legacy + * @{ + */ +#define USART_IT_ORE USART_IT_ORE_ER +/** + * @} + */ + +#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) +#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ + ((IT) == USART_IT_ORE_RX) || ((IT) == USART_IT_ORE_ER) || \ + ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) +#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) +/** + * @} + */ + +/** @defgroup USART_DMA_Requests + * @{ + */ + +#define USART_DMAReq_Tx ((uint16_t)0x0080) +#define USART_DMAReq_Rx ((uint16_t)0x0040) +#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_WakeUp_methods + * @{ + */ + +#define USART_WakeUp_IdleLine ((uint16_t)0x0000) +#define USART_WakeUp_AddressMark ((uint16_t)0x0800) +#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ + ((WAKEUP) == USART_WakeUp_AddressMark)) +/** + * @} + */ + +/** @defgroup USART_LIN_Break_Detection_Length + * @{ + */ + +#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) +#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) +#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ + (((LENGTH) == USART_LINBreakDetectLength_10b) || \ + ((LENGTH) == USART_LINBreakDetectLength_11b)) +/** + * @} + */ + +/** @defgroup USART_IrDA_Low_Power + * @{ + */ + +#define USART_IrDAMode_LowPower ((uint16_t)0x0004) +#define USART_IrDAMode_Normal ((uint16_t)0x0000) +#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ + ((MODE) == USART_IrDAMode_Normal)) +/** + * @} + */ + +/** @defgroup USART_Flags + * @{ + */ + +#define USART_FLAG_CTS ((uint16_t)0x0200) +#define USART_FLAG_LBD ((uint16_t)0x0100) +#define USART_FLAG_TXE ((uint16_t)0x0080) +#define USART_FLAG_TC ((uint16_t)0x0040) +#define USART_FLAG_RXNE ((uint16_t)0x0020) +#define USART_FLAG_IDLE ((uint16_t)0x0010) +#define USART_FLAG_ORE ((uint16_t)0x0008) +#define USART_FLAG_NE ((uint16_t)0x0004) +#define USART_FLAG_FE ((uint16_t)0x0002) +#define USART_FLAG_PE ((uint16_t)0x0001) +#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ + ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ + ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) + +#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) + +#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 7500001)) +#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) +#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the USART configuration to the default reset state ***/ +void USART_DeInit(USART_TypeDef* USARTx); + +/* Initialization and Configuration functions *********************************/ +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); +void USART_StructInit(USART_InitTypeDef* USART_InitStruct); +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* Data transfers functions ***************************************************/ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); +uint16_t USART_ReceiveData(USART_TypeDef* USARTx); + +/* Multi-Processor Communication functions ************************************/ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* LIN mode functions *********************************************************/ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SendBreak(USART_TypeDef* USARTx); + +/* Half-duplex mode function **************************************************/ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* Smartcard mode functions ***************************************************/ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); + +/* IrDA mode functions ********************************************************/ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* DMA transfers management functions *****************************************/ +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_USART_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_wwdg.c b/car_llvmkot/src/lib/stdperiph/stm32f4xx_wwdg.c new file mode 100644 index 00000000000..8cf32e72d8e --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_wwdg.c @@ -0,0 +1,304 @@ +/** + ****************************************************************************** + * @file stm32f4xx_wwdg.c + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file provides firmware functions to manage the following + * functionalities of the Window watchdog (WWDG) peripheral: + * - Prescaler, Refresh window and Counter configuration + * - WWDG activation + * - Interrupts and flags management + * + * @verbatim + * + * =================================================================== + * WWDG features + * =================================================================== + * + * Once enabled the WWDG generates a system reset on expiry of a programmed + * time period, unless the program refreshes the counter (downcounter) + * before to reach 0x3F value (i.e. a reset is generated when the counter + * value rolls over from 0x40 to 0x3F). + * An MCU reset is also generated if the counter value is refreshed + * before the counter has reached the refresh window value. This + * implies that the counter must be refreshed in a limited window. + * + * Once enabled the WWDG cannot be disabled except by a system reset. + * + * WWDGRST flag in RCC_CSR register can be used to inform when a WWDG + * reset occurs. + * + * The WWDG counter input clock is derived from the APB clock divided + * by a programmable prescaler. + * + * WWDG counter clock = PCLK1 / Prescaler + * WWDG timeout = (WWDG counter clock) * (counter value) + * + * Min-max timeout value @42 MHz(PCLK1): ~97.5 us / ~49.9 ms + * + * =================================================================== + * How to use this driver + * =================================================================== + * 1. Enable WWDG clock using RCC_APB1PeriphClockCmd(RCC_APB1Periph_WWDG, ENABLE) function + * + * 2. Configure the WWDG prescaler using WWDG_SetPrescaler() function + * + * 3. Configure the WWDG refresh window using WWDG_SetWindowValue() function + * + * 4. Set the WWDG counter value and start it using WWDG_Enable() function. + * When the WWDG is enabled the counter value should be configured to + * a value greater than 0x40 to prevent generating an immediate reset. + * + * 5. Optionally you can enable the Early wakeup interrupt which is + * generated when the counter reach 0x40. + * Once enabled this interrupt cannot be disabled except by a system reset. + * + * 6. Then the application program must refresh the WWDG counter at regular + * intervals during normal operation to prevent an MCU reset, using + * WWDG_SetCounter() function. This operation must occur only when + * the counter value is lower than the refresh window value, + * programmed using WWDG_SetWindowValue(). + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_wwdg.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup WWDG + * @brief WWDG driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* ----------- WWDG registers bit address in the alias region ----------- */ +#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE) +/* Alias word address of EWI bit */ +#define CFR_OFFSET (WWDG_OFFSET + 0x04) +#define EWI_BitNumber 0x09 +#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4)) + +/* --------------------- WWDG registers bit mask ------------------------ */ +/* CFR register bit mask */ +#define CFR_WDGTB_MASK ((uint32_t)0xFFFFFE7F) +#define CFR_W_MASK ((uint32_t)0xFFFFFF80) +#define BIT_MASK ((uint8_t)0x7F) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup WWDG_Private_Functions + * @{ + */ + +/** @defgroup WWDG_Group1 Prescaler, Refresh window and Counter configuration functions + * @brief Prescaler, Refresh window and Counter configuration functions + * +@verbatim + =============================================================================== + Prescaler, Refresh window and Counter configuration functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Deinitializes the WWDG peripheral registers to their default reset values. + * @param None + * @retval None + */ +void WWDG_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); +} + +/** + * @brief Sets the WWDG Prescaler. + * @param WWDG_Prescaler: specifies the WWDG Prescaler. + * This parameter can be one of the following values: + * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1 + * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2 + * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4 + * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8 + * @retval None + */ +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler)); + /* Clear WDGTB[1:0] bits */ + tmpreg = WWDG->CFR & CFR_WDGTB_MASK; + /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */ + tmpreg |= WWDG_Prescaler; + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Sets the WWDG window value. + * @param WindowValue: specifies the window value to be compared to the downcounter. + * This parameter value must be lower than 0x80. + * @retval None + */ +void WWDG_SetWindowValue(uint8_t WindowValue) +{ + __IO uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_WWDG_WINDOW_VALUE(WindowValue)); + /* Clear W[6:0] bits */ + + tmpreg = WWDG->CFR & CFR_W_MASK; + + /* Set W[6:0] bits according to WindowValue value */ + tmpreg |= WindowValue & (uint32_t) BIT_MASK; + + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Enables the WWDG Early Wakeup interrupt(EWI). + * @note Once enabled this interrupt cannot be disabled except by a system reset. + * @param None + * @retval None + */ +void WWDG_EnableIT(void) +{ + *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE; +} + +/** + * @brief Sets the WWDG counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F (to prevent generating + * an immediate reset) + * @retval None + */ +void WWDG_SetCounter(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + /* Write to T[6:0] bits to configure the counter value, no need to do + a read-modify-write; writing a 0 to WDGA bit does nothing */ + WWDG->CR = Counter & BIT_MASK; +} +/** + * @} + */ + +/** @defgroup WWDG_Group2 WWDG activation functions + * @brief WWDG activation functions + * +@verbatim + =============================================================================== + WWDG activation function + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables WWDG and load the counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F (to prevent generating + * an immediate reset) + * @retval None + */ +void WWDG_Enable(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + WWDG->CR = WWDG_CR_WDGA | Counter; +} +/** + * @} + */ + +/** @defgroup WWDG_Group3 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + Interrupts and flags management functions + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Checks whether the Early Wakeup interrupt flag is set or not. + * @param None + * @retval The new state of the Early Wakeup interrupt flag (SET or RESET) + */ +FlagStatus WWDG_GetFlagStatus(void) +{ + FlagStatus bitstatus = RESET; + + if ((WWDG->SR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears Early Wakeup interrupt flag. + * @param None + * @retval None + */ +void WWDG_ClearFlag(void) +{ + WWDG->SR = (uint32_t)RESET; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stdperiph/stm32f4xx_wwdg.h b/car_llvmkot/src/lib/stdperiph/stm32f4xx_wwdg.h new file mode 100644 index 00000000000..b789ad872e1 --- /dev/null +++ b/car_llvmkot/src/lib/stdperiph/stm32f4xx_wwdg.h @@ -0,0 +1,105 @@ +/** + ****************************************************************************** + * @file stm32f4xx_wwdg.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief This file contains all the functions prototypes for the WWDG firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_WWDG_H +#define __STM32F4xx_WWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup WWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Constants + * @{ + */ + +/** @defgroup WWDG_Prescaler + * @{ + */ + +#define WWDG_Prescaler_1 ((uint32_t)0x00000000) +#define WWDG_Prescaler_2 ((uint32_t)0x00000080) +#define WWDG_Prescaler_4 ((uint32_t)0x00000100) +#define WWDG_Prescaler_8 ((uint32_t)0x00000180) +#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \ + ((PRESCALER) == WWDG_Prescaler_2) || \ + ((PRESCALER) == WWDG_Prescaler_4) || \ + ((PRESCALER) == WWDG_Prescaler_8)) +#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F) +#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the WWDG configuration to the default reset state ****/ +void WWDG_DeInit(void); + +/* Prescaler, Refresh window and Counter configuration functions **************/ +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler); +void WWDG_SetWindowValue(uint8_t WindowValue); +void WWDG_EnableIT(void); +void WWDG_SetCounter(uint8_t Counter); + +/* WWDG activation function ***************************************************/ +void WWDG_Enable(uint8_t Counter); + +/* Interrupts and flags management functions **********************************/ +FlagStatus WWDG_GetFlagStatus(void); +void WWDG_ClearFlag(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_WWDG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stm32f4d/MCD-ST Image SW License Agreement 19Jul2011 v0.1.pdf b/car_llvmkot/src/lib/stm32f4d/MCD-ST Image SW License Agreement 19Jul2011 v0.1.pdf new file mode 100644 index 0000000000000000000000000000000000000000..08e27b5b2708e9fa5248fb1c4b7e7b382505e1c8 GIT binary patch literal 129125 zcmagFL$D|e%wTzK+qP{R@7lI)+qP}nwr$(C)!#qWGqdPLuae3#l}*k`NaaPuXc_5P zph(BA;|ihJ2^a|M3@xE}c9;{Hoe9fAPG8o)^fB>5ZNY`J>`J&n-1jii#P&PqBRD zHD;EF#0F!UFH1-3LEBEosYHbkg!!j$+P}~IZ(Sb}nEZ3_L4o1;(bf8l)Nz(zdmFwG zHuzTkyb5<|Tu3ZgwS2D;J;JV%&HfuK1d!fOOnrA1)DWmb2{Km2n-;iua!``L^97PA z9y{tQD?qg}RXEXjJ*((sFEArCY)0V`Y7cz<-ntGS% zR}_GEKm7z&8H?1uNKUw~>;MP|pSh@*&})#lceXAUf6CmnC-zHY4C;3` zVK05{(hgq*>aD-Vq&sLAO8q7i!q0 z+lvAMEyfdzid)=TB(kj{&Lj$>CeJ#3XsG*=2!onQqy^YS}a; zNWu>o%~y>TldYP-N}g!8bd#Q5J9US!3H0n$m1O5Rh{lkkgKR)p=ab=yb8DCvL8T&L zZujvl`156S(lICkNdnH+r~y=jtn>5WZPSs?M5vLuQ43%ZiBz^@)?JuqA)#|IR-M5N z4DO-l%pQH#TXP3QyOpyID+%u>*XNV)W4gr1}Ip z%_H%qH-|-iU)Avpb`jav-3%VA3`)+8Xa4*6YAKx1`6U%p2kKA4w)Ct6L%l! zr#jDRwvp=d2b#wnHB@8WxxT<+VrXt9tyK1`TcMot$Ycn2Ifvu%ME#5ro zX5WQVrVB;a#@KaRUBgHS7FeaIHW0PU4EoJG8x_U&wWW!?hGJhjqmjscLu78Sn^&Qn|2-Ojl|5JK+7?bum{Z% zQ|z`4tpu2eGM~^{C|T(q%7f+e_|jQlzVD zE+SZU;3RUkDOEfrX~ER61VIj}nG4cdwq_ppbY*Yl>k1Jwe7n0P$(`}!-E)o1xB_K& zo6lX_TjDAM+!IO6GIyp$nurbq&F?2Ujna6WwV(R>6V@+|ip4ExqeC+;N`583$yJzg zSRp1RC|fZAra%tImL*lxx>J%#d19OGmoD zkX@itU`9hU;BM4?s$;Mk#gPWoyEtyXvap6bqmj(Aq$ul-p z3#s@LBvo*AC`>BL34%{tg-iX4L|MMdoZ<~yKwo0T%GTic{GY}CO zUwh=k#?n!JWJwrbM7G-mQ4!g|)y%d;+UHJ9ZrLdX^Euj_=fBGeaVQ5h6#I7}{N_F{ z&8T^fM8hIjb2J4a24z5lg3a;Qh#>XM>oW z>0&b<&q(h13S5)rZ0ab9(hJz%X(6rQhj>xQB7gRJJuf%x(k*FQEU`lnp> z+ndJcb`tETpe`uQzbjDr4203X6p^2`mdPm(ZogBc4dy=hhe9FHb_K0yg9X5Jro)N2 zM5<~HPuQ!97N2D)L+S!4&q(Con3<&neE@ePWY!wrPr1aXUZdz zChlT{HX3i_>unY`Yy^^Ow@_!M5NMLXwoE+}BAgklWWajz zm-tVw7gMZ%r)?lSav0Xph@zVkkHY2s=7)#PHh+bfhT~QGt*N}L*d$P4r9HzCfBRM7 zh#Kg4JQ$9K<5HSIh3}q~WdmlHtz#8^1bf&lB}8}@%oI1vpy#+72C4-?)_FlOctR~m z-|>&513#tcHRo_Wr&}`o?J7tKjq}~R+Wx0W-(c_ysDvMIo-?3e%AUkr7>L$fADSsJ zXp-so<{a&~8Qj=3xFK~v8SKqe?7Tk~HPa8k9@QVcsEOBr)(971cdixbw*VX%MGgfw z-{nnY-(bo5)JC5klq#D^CF(mO^GKKc1(mHS@@(I6u6DVDDn}%Ob8ulnV!*v`I0WzE z^STamjlG{`ByT(CBbE!iH$&sEVfbUjE~-|GL(jCZMBspJOG2NPG7csvn^`k#n#HOF zaItWkv9XO7vl+Q4J>1D~tN_vECXRj*qV-!b6dgksqP_VXN>Q2=K8w;UBr8UNL_xyn zku8T+DocMM$V-0-r=u~|Z12T_sgW5nficdh1Qer*o7wpyDZ9=7Lsx_k_4e4N7Y_2ToY~XrKK{RllfXf zk^zb-%avM-pF@HpPU`*}K3gdK{rSPJJ}tJ?fSzp{5XEoocz%Qt;QHTsHyTo8c1*u6N9?kv|j9JZvb_qqV+|ODX(GHWa zWDMGDBq(G&>Wy#*zrr6sd@^wM1^8TGq)Vt-8d;1U@<0R-FeS2?v1bHy4|xjaa9gXI z`u+9UUQU|_0}m?#2Uw<*hF_W6P%~(=GW0{4BC?=||6r4bH54C!WiB|C3+L^B3OrO! zMm-BKWJJ-b-0?&Ruj&We(n%xPBvCw{UCtr)NS6f=0{&E6gFReG!|}wcaOEMnR<9e? zFBjJ9ui}np#lqMx#wkCi+f(r!xcQ+rA{jl2>0G6X0c~mJ#_R-bu`hH*ZSv6aZ%m7% z(^&fBqp2JgJdR8-pgI;3N6j_|pM$FR%(<)bDU|;2o{VjU5WrNt zP;S9|W8uc?c7#NoECJiC5Z<`=rxC~gF4q5L#GXcZ;VQ|oT*+RaTYgXxqO3bB&C7VD z83}nQaovLj>A)!wyKX6uaW=`w2B#bSu!*207&u}^r9dnuxr9+R1S0QI>Nf@V+>r#6hMKb1-we3!l1DMt7H$| znJIJPPkB{j+*k9Ei-t0<;3+aVe9f`SI2g)8yoF8k4t~VSRfdb7dA8`ds2lxKE!AI) z?k5uF#Qj4ZU^

C|X*e3zd}_*bb#-WQGISpZ0Tgb#JflynIXWL+b?(ua^nS<7^jQ z0@{6ay@6U#zjX9KJ=DSF9dJHifVN7TAsg#*tr@RJrrKa84=L=|n~oIuZZ`QGjwTr9 zw_uHMqs5k>7ars`3_GV z7e5ey%$-2-B0abhqJB8XvNBqLO>A~UH@pB-0+d|6UL_ZS2)-Rqsx{ay#2W>era|60aHmJC6X$rvWB8G*DR`` zvjj$);dmqSN2sb>7!lP(boQCx9H=co@CH7VlkU*pM2M(ca&VYX0(o;PJF<;j(+tQw z0Os`=-iqb_lx$(a@Mm@m7P0qj{Hi8An{VexeAS2B8HK)lb%7KSz^vyGZCNy znewh@FV!I*0mrV%|IZzwhbi#!d!prQu1Cqrh7UdFje@Mo$sS`Gxve${m)wYwH_wuE zh$NAA!7g^r+ClY+fQG;|{TikMiW1AwEU&Pul7pA(Y{;@NLp?CjG@SDE)!;5MlO)SjwsXbeBmDO=B1#N@~ zQs|Znz(88uQn$B97&qHb*$tmy+^p40&bnif9l;dG+j{z0w!CehGz`{{wk=g8$%j!WEzGpdev7HCqV?Q5{KJ3>KIB6)oYysc5zCdmC) zT6vr~CL9`4e1IQ+-z@XQKIOi|=!h_Uj@{t2;v*NZRv9|gS)(xo3=u{JAy>NhGsuYd zv&5sUN`{l%`Pj&!D?Rei8Z6=BMg5mm-7J4yjJ!c={l}G=D^M{aG7H5FHN+8RU2TWF zG?fT12EE+xeHt)?(TBC6ssq^Q?>+v)CT=J&l|hp?lIbwsCw}Q_8zL1ChPh>aS#+ZF z&}uSyi@fRwJ@F9WmO(IK@>B{5lT_}&wjVs(G$$!AUxU`XYIKcsRwGMBjWBf+_$Xn) zGnm(meXj(k(}W2JnP^hHek7`C5n{p|xS&4TsKowl>)%Shxa?z2>Ll;$QgJDEx(A-2 zzGu>a8G}$`Uj%_HP85gFQrqp}T@l;6t0QxYn`9Fm&ITh;7ZeHC#?5+knT$8fChop8 zk9nX#M%KZ=Izzn4~#L2tE#0ZLA-c--Segji-uqWYS1V5*mpAH&T%FXeuGU++R;Kx%&Q zLuuRln)m5fa}DS#eoBzv7spy0;q&v6o<=ayiEiDjJb3bo&5bL1s6RbIjJ~zH&6X0L zU_9L!wfVHotNn|Yb2oy9UZ^qqitby07AR~}HLW=UZ?Yw;9FW1NW&Wg%-xqRgBnWaK z!q|}q=}T7-*y;8PTcE&G8!Y91B->gVz3dDD!r870KWXI7GWFWepv@!n^Xry6K{L=;Ln7@Sd?d=$ZA+ehCDiFI7NY1TLV7lsIQdIfElBDT#1+tfMCL%TR_=P^)#FOb%R+DVL%065HL z4~LI5Ts;g!i!Oxl(#@eL934y9I5*3_2j@ODP^s|q^$&cjHGqWKLMu?nA`mT~Q5_EK zyEqo$I-j?;(%!Yb7dQ)fj*gr5?E)UO!1=RaR?wZSyuYg;)behn?=^Pl{zP8Q^UTN0 z?Lr;8yl((25!I`Dp~@twI|{b?IixW~qa&sw=9JO2`bnIBRww$u?S0MhVrPG8I~%On z0PF_8aujkKGXvFj{QdQ6P3f^nVL=3Mh`r3;e7>!!5qRZhQ8CE|1%z!_8E%n%c;<1KDhq6mownQa#?k zzr1Iq7x*v?Gvr1be9TXEyxpU}z>~B^U?zR-LN%XS0mg=SSX_b-iYQW2d_(C9*7k~e zGWOE5a0!!j;R8k}_vZRWpfh}~i0AiRON~zz+cVbCeanzFV_9G4-lWDZZ$t~N`M;`H;Y7`j;}gDlI# z0@RP<+d2b{Z_P3r2))2`oK-85XbnGd(;e%C)p#|WsdisBUJRn%3X;pi_5l^yz+1@9 zTNthus1LwG4Zp|F984qK_sYwsl&d8afIJl0t2`QqlYtC9my8%gD{~e}y%`!Nw#NUP ztN)k%4~zdF0{=gem6MGP>VMamnEww@&&2Y7C-rnf!~vr33LTY>U#@jG)HlWw1o2~% zVdc8cobfft=CUc8>`j1(ta7wl51RW3>>e0@06nPvVsl6pX@^Q7Nkg_Cmg7<4o$?WrsTGn4??K*3-@HFn}T`Pd`f8vH{NKRcSj%>I`38-b-!~gh0 z@!|2WKL_+j(EBCe%3NTUs+64q>g=6^7l-65l-=XT69s;Cj1_BCbKet-m&_53gnJjh zOyI41Yt6IRR-7I&c`MYbTiuQMcEZ<{Ib|*$5BkCDm@DMJqhZCAoJdBit;WLAvg+)H zrc|chV)|{=*LcQo%QgyG`GPLpXz~@?N;%1v=4KqgV*02uOF@t(mBsm>_*-z$i*v9~ zEB$%0YfI6zY$)HuLhTEXkzXvgi|urUm4-h)n&mD9Z5nZ3|DbnEcxS=lreG3#RS@oM ze){C-^&(sUnaLEGh{^}de_08xw&qiaDbl9RQbFI%PqcUtl+~_t{}qQ^55gXRfE19q zl~M+$XeGoo#lp-HUt_0W&7$dt!xfL*5gzCxg~A709f+-B|T04ne<+0fxl_!SNw8rw|>!P;WnRTholy^Z7Q#0K~Qc*4VhjfTsP({c|y5$)_e~(vXEw4#rYYmTd7>=!m z4faf7jKKU5Ll^kIzXPOFfh*?XgYE`YJ`$(WHo{>tH)@*qc|LrFyuCS~N2UcV_Em#H zmo=awwflF#t+0|%^_B1Yd!~L`Z4-Nr2-@#Wd~#Rwa8@MF7DSlFw3~mQJ>5J4zdXUg zG8j5~h9HE~v}CEP%XF&e{rgY-B+sU-+))CY-dQU@D5FEHkD0F?UXd4}H^I2sgefvAWHseB3bpz0pvh2ax`1|@9lVR06Ui_C zgtH%FS8lQ+uzKgdIsF-pXQV55x1d#QDpLlG@x=C=vMBrng_DPjjim}yep&Dsp~pyZ z>1L8rj#!zu7`2=l34+Wc#Ynu^#|*)pV;p83FamP<_3li6N_NE%upXx+nKzpQkzg_OOTeTUH|u)0{&UO%E_$<^4X`mxWk(YvUEaU?aC4V*VU*YI1U?M#cId{){_&?=H20=c{pf6?m`nG5{}5%cAfHOB(FspPgY+u_~O zHOs}%|0rY&&8T=U7adSP+pkalt5_|cuYRsHG3b9CnqOZFF2s~Jmj|Cv`c7!c1n&>T zW%$Vcx&{`7(Ee&5H{AMYQv(a2#As zU@uCSG7hQRJDU##@(nwpA8an=3JUr1{vTt{Vg$&}7EHm&qDsW`a z+|+CLG`LuvcSt^!&+WPH6WXGKwwBPOJKgLez3qH#mrvOK%+;YGPU038g7;~P;=~4{ z>{0Vu@=Af*R!p(Ma0;;)2B8VAtNp`_1S8`T+m*kBYJ_^Hqqes@*U-R$LQ3igP*p)P zIy>WBspSjG-I@qUV!L_XKIEpb$9|J+=;fFJhIcwDiI}s#@GT-hezNJr188S6;XJ4{ zt+06Q1iKz>$)W{I?jc^EQD1CJdaxZ&+-F_Dhqe8`J$9I>vwyiI01bGUzK3wT6_t0( z%x}x*A|4f{3R!7pNLvWrAEVljKnOO%l#<6CR8rM5H1v?af!PG-VTB9mn4J>4?6)%$ z(3=dC)RtX@&mTu)29_~_!t%m}jX^ZUbYzoW=GPKIhq~tWO`$kzKlM*mr6_^(=e#t9 zDGod3S=DT$t?57vjJ8T405kSJG>$ZkF0ya2T*wkrJi%ob&!;Kjp)j`XdUdkx1o%Q^`$af0wbX^ zz61fz2o^85MHMlF=eD$V6376vH(XA+J>7yF{Z5vaVGRo(fcUvgDv7a_NCP5Iqu$F;<;C!eg0A+r)u?zYA=;BzsFr` zfE23PW<(-uB8SO95_K8-_$QRT(b8=EXmEsk;@=Ol{qn7>LWq$!DISFzdOyUkNwE6N zPBiIR6+=(iE(9M7zNhA2PpbG{ogIoj?R+ z`ZbCx)K0p8y*B>mJ>K zL_gFSk8_{h>9d{2kKpAzmzW(~X`NOYW+P}2fYlDQM0mppP{$flqR>iVVh2{u*%n3Itq0bm4y zwD++EDT4)hGol>{%&ds=Bud8D*hbmC$vhDZ)u)~1l_88)YZqV{3wZdD6oKBhGvt&KMGL%09*vfUhXFy+9}Q+##~s8vZoZ7 z8|2FNeu=O!J<#X{iDbl;D5KjRe8HD_@xaUh@F;Ss7OLRgBMub&5DuzhE{wMRqA`+u z95YozOG1>-aU%}KvzPHoVU~NZ`iSu{kRdm0+%$MnfyD%CH99QwHCZ)8N!U-EJ&XO9 zKdWJ&25b#rMHI^8mAN~|epGVj{ap7oISpU=G5`%CgK)XYa3%@)E0{d+CJ{0sT`7a| zqx^T@Z)cA<-#*2Z*0$d$rTqN^`dJIL2I5S3&=5$ z;5O%aL>5tMjW6%rZ5^v?!NTVp!^p+bljcn@VGm0{Rpi+>MveQE=yF*vA3NJwJhX@p z&HD&J978=A0N0@j-j?Bq`8E5oYq!vU5FUKCNsgNsOx2}u&@t9j#K7}7FH`HnMsJWF zPTWeMb5K%~guS^jhFBW^uuBPMs@CkCU`bYto!7cAXT|)o9Oq8 z48Ro_T#@)^0V=I|IRws$9MN`rEBdRQy;I5_G}LP-J`eMB7X6A?u}mE4>q%;sd|sg8 zLfi)_M^gNE_e@ITCYIj{rJ@eZ&7V=Oo7;EK&=$6$lSd5lN;-(5n z*Ik__G(pMxt>z4B%jgn1+Nn-a@C!IYgbuyrpVfx^bg$y}y3 zmOyDmblDUycSip%IWzMe)b(@Z0z_6}Gjh5utP2?xC2iEG%#=LDFaLA8yjK-v6ub67 z&_H9g^UyIJN{7FIXZgr*Iid{Aaan0Ic=OWHU!@XX-XtSN3PCV80I;pdnU zUVyLk&cz;nv+_a(e0R9!8}ual%nR2W&q0KWe*d@E5^o^~7H zN}Wx(EZ*SeIglvR_{ax>HAzzRMKPb8qs3KoMb{!vFDR%MnqNY73g?QxnO7N<&fwbr z@isFv*jJo;b9@^L>Z`gfFznM?twK_Pt>~sqed%TL-CeJVKl{rGeL5O$5oL5uT4P2j zek)bm&bZ!Q=#jparE|J$`D+%0W=pNIt#j~BgH%WGN6w#mF2e3z)i`^Vw#ivQh*!cN z80{fh-pOlqwA2FoKqFf$Q4s#!3c+;K&BmrJ@Y;Q`CFlV@FtN?-jnBp877s&+@ICK4 zX5KrRzutzOpb~rytw_0+fXwlIp`CY1x7>OXvgN)rYDX*ATb<|I{$Cjv0{w`gF@<6Vcc{4@8 zw!jJ*hf7xD8{6`=btF-X@0+^XH??_0DPrLhBVV!uJl)4pn?#yh)X8*PcuCPjJv>Rr zw<4`l7v|ll!H`L~pM*-j!)<@qoL%cPfBQ)eS)V{o+Z?$xR9LbW5V+$Ev6!_^q;1ix zBj)%=Q2Ykn(w~&)Q;y6^=`zh!gnC-Gfa<{cm4f}7v~KG2bAkgISrh(GnFOQH+$fl( zaLs%+&2kvJ#bP{l_L&WH59!@M<^=ZGkuW83^==Qsn`}jxm_}`V{3{ zYaX4D?gmwYn-hMH`M&!2*lY{ zph)Ot3fT>)sXTiEqqwDQE{F#*r>V~B^F0ck5LeE_OaaitmB8~$Lgkx?s}zkWSf_lt z{@+^)@20EVD(Jm4^AE+?AxID%V3Udw6oFkRQk-?k83_*0J?#z%bE7M#_HDs3c4q!(tSm{TI}Zz=6!5)ivF@V_x@RMu8Rz5;0JzttapV|Q5Ny> z#2z^JIpqxqlq*d#sBm&%6<5VS!FK9pxKCUg z_AV(1nyxEZYTr9zcQ8cIh#IC~VzQhwa+rlf=Rl_G3S3LhUavvsX-i^MwRG$fXsv^! zmf&rrCtKdLKJm{yN74T+P*=Msw@4{?=Ld=Etzs`x$!y^xY4QM{GP{ba9zGG#@DIN2 zz8tS-2NCQ^^&M~~Uq?^T3n$OWX6BbzX-{K(hJY)sGHSO%GA={QHwXw{vpTlIU+FEJ z1%jjXwE>7JC!um(*kd&z3+3c7Ms3@C)IUCbD~(@rv4bKl7!Y@C{<^wiK{SD|T{HOl zNl)plGjKs33e6B+rh-qBHa<=?e|OXZ0@|lJjkG)0C1@HpcIv6>XlPVjaRv}92U}q1d@YJ=PltQtK70aPFnc&G9ia5b z=-t0yY2%r%fn_8VwC-cA;Q-@)qKFg5+Q86)0$U3|L!^TGQ4^rt_UYOp*4$i}1?&%P zO^GZM7twn<`=l7{GW^TJ(RfZAl*M>>BWG}c=Z_z8eE+7vd~C-b7cxjpkOfZ?)hCM} z0EF>uQ^VEEjiO6Rm=zV2Bc^|rOxOq}e6NAKi>}Ildp7QHKlbN!$s`8bEUQx^Q=8k) zDTD(GXp62^QoHEdls%mgqDG*&8)B)XLJA;PkPm%MkZO#akUnH6IOXlNx;IXHn<^)U zSgMV-hw&|x%vRu)#~=ws`#HefT23A?K(@Zm9+-I#_-#W>eRFJ1>;e9+GK6)BnO$fC z2p1EOI;&Bk;+eoshA)~GIrzKeD(6CG(*!k)9~6Q%J}wPkpwsmG1)aYtJWyw|-Pf$- zr2i8>9ge^(5nFf>_bd~A^oI8G#1|R&)Qo!Q1gppVXG!VeqEE=ms4?67T1Mj6eat<) z^Hq#h09&s1`YWQkj*O#|uY1=QTdo4NIP1Qom_DXIg-3yy@UOFN2gj%^v_wLs6FdDb@b6R&E7m=SU+IYl*dH%P$=1O?Q`sShx# zU$VY?SJ0MHP69RrN6<>qm#4_FM35dA*XXTZ5PFJ0zLl5|n_e8rDoDj(-kAM+66K7G z1DJE=dXBAZljvReMSY|`M{w3;blzgk9 z=5Dx3Y#YYME{Tir>^{2fg)~+p2WhbP)7F!;qwDPhuSlynrQn`|qk!va)8yeMR!;qA zP;hAgNzASKdAc|uC$*HNn&6XH+UM{c<7jwF$k-ZwCpod^#j3MbD+@ff1}TyfXt~s_ zJdOwWg2WmWzevAzo1exUGkgX-{kVu1qQ@uEa9j30ZRl0<%#RkI5kYXMZfH^{l@GQKbves*Oz18Z~WE zZek>NBSTyPm`<=|$I_~hHFJU|--G@ME`-#6yx83v;YXJckFvDZUS#&3wyHy`ulA#Z z6lnnn|Gg*~WW&b)yc&3Uoc{AW*B2ALpsGydxyrRQk3j@%!#J?>=iPUvWMb=`*yMhA zF&!#TH@K+6sT|_g!#1S=dRW|GGmjJa#dDImd@5cyhS%b)AHm8MQcJ&~&3#mYbPm5O zl^=1fVhO79qovvdteuJv`uvw4dm-fbeCt-%D4R$mb-Rb@0C{+NLzpL!%6qOY9@)FL zw^h)&HihpoKfurM^59WBuDg*$%>E%&@Mk+16$*J{_s^Co#Eh5rtj^b#07*JsXl_WD z91H0%%FCi|X^vRw=Hf5Dg*hQy9X(!&Ik# zFu0bVfUByQMa^k^7Y6k@P6z2)EELxEsMf?YpYXtmZytXmyl+hs3?4*1zl6KX8&D$5 zKcFm)O=LFzxLo9NPohY7i!?$GrW|6J!{mA0jQ^t%NtRwUDHI@@rBo@ayk44AZj|<{ z)QLU9s7EFEp90Xj;XUA-`k;|3eP}0uukauXvD|_NDP;N7=&y@4|NDC7;0R7JLE2o7o*D$ZyU&$ zs$qxe1Zu5~W}E55%HwfzhXu4XCsX%dq7`k%;;vgMVK!0DR^y6y)dHr?qK#3X{Skb| zO%d&~(%KIsE^mA?IXJRg$$~Th74q<4GK%18W{yBx%7;*nSGxJ%nA3JYAZ1JwMqBLL{*WRojW2 z==hFYjse3DJNhBiMMcx8b<-RNnPEE&7In=t(}E;5g_Rf6 zy%N9`UyJ)kF!akDVQ}ywY3Tym)($viufEKBprgc)|6!0xP3?+P?MlxSawqe zL-XWu()Y*XE5{lhdG1ch-?rb|`sJiHKc>BCy4b5UqQY8#`Fl%WzBeG!Rc9f0VxhhU z$alx=?7{6z(|~RI0%&fJ$oq%d*Ua&Yt)G!5Xs*p)HGCS(Yo)9{sl?~(@vFg8-G5N* z+U_F{rI4e|cv)n^WSo?LH#ZV0{!>5H_$W4Nt-yxu+e`scr12qQoWM^|i3QFZDWTp_ zD2h0f;I3M^GOiCoGm#@@mt#gNFEAbKD^8Oo*+WU_Q(dL&l(JY3LlQcabtk~ie6mku zZbjD~8`6U_^LMwn&Qw?Qsu75Xl3a5=XlIyVsdm#P7R!o^;zWF@`I&$=<7?7dxrslM zr9`Fh=92U9vujotajmap-ziIa+iNwX5X|m2=a_>yN>9cj1w@?vm{U$k3VLA0-6#8L z7B0_^CLTY_e6YVR&h}L4jX_zQ5-l0Ha8XBmyQ7$p{$89B<17PILC)v^x5fTT6zjW0 zL^yrqrprFHN{+b4Y1HtjW|pFjYjC_4B@j`7`JHdO7S zbS1cJ5vNt3_$|pIt*2=w>7R)#H52n*$QA@?!)&HOywaQlr*^JWSLnR{4~2TF99)9i zkq7;lbpK^h=b~zW4n7nc<*3M)ozl?k?C>>CLXk}^29KQ*?;{_*DMI1w44AnAIyr&Z z-w!HTwKK-DW%FnTrGJ!FoMV3W4(Yw&Kt9mW;o?)qg1B!@S`=^;)4!_#DbHj5-2P?iLFh-M63ss{1e$@vnrHbZL&mJ1PPTwXn3DOI&SAa zfD3a~szLjC_n?@y7^bVq)UDBW)XOU4Q(;s-#5y#d7zG0Ow~v2{+@ewqs=G){lLc?X zYTy;xutu098Rr?qbMQH9HRw*_#vyfPXBnsFCgV*fE>eCcE(8%(GlA`0R@BAjx@9Gl zmBGbjtzMNz?jY8kcZ&udDR0Rd9AvBZ`6F;Qe?O->@XuHrt$Aw1yE|_gpCzi zSqoMNmSqAba4Di;B_{Jv{Af8lf89N$(e6~X6LHFnr6001CbGZO_&zjfyzw%v*&@M9 zTwB{aL2_=>Ep$qSXri_uV7EF`il=67Ap2}H*TD*l(2?&k$z-~>f&qx+(>e05wA667 zg1bfhL^EvbzR}6zsE{FKUQ_V0$Scp&ycl+2D9Kzk6<%&2Imw3iwhG+zQlcm&LNTW! z(e*W$n(=Wq*YB)eS7_Ji%miXjE1%A&ddR+Kk*0P?{932|*L_neaff7P*9K9{Y}2o5 zXM(HpEP(oW5hC!4RhHmDY?9NBwM8(*=gvQ*b_|c`g*tyfLqUsB1-R7w4>$m$dQE~C zJd4Er3+IQK(mOxZlCqo?s27M zHj;n&3g~0Cj8&?w#_pTun*^{6QQu@G6RRNAi}PBVA@;ySlY#uLuwXM?5lMj1 zNE@?C2vnn#06a!xiOfZCS}5lX zkb@|0!~TNnn0Y#^^-xE{pVfXoS~#h{?9wA&x!+FN*NxRcrjY9i#e%d*`m+(-reZ?R%z zg^tjtB-W1{D+h>=T8Of;I%5-7LB23IFLZEo_e`F+-KXqS` zO|nXaf)v{>Vxlu6Jas0mY4Hj_qdVz>c{R$>#lhS?;ew0TmF(bI$4 zSe`jYK$PCV`LT-$wnhZV>F}uiL6>e-(~+TwTs~V->9jR#ZB>(uoPSJ#>~|f&sBzW| z#`no>8cC;<8dD8L+2^)+riDMcN2r< zms{hIl`^=}*|8rtiun)<4O_Bc7m#O}dUfxhy) ztC2&G#o{J!s$hF4dFdRmTo6Cvki5U6en2O+0ZpUf>;uQB9kNDcp_C#}lAR7UXiDXH zoE|l+x!ZuKyPi5`%X&@Y^Z$8t9PlrB~ihD4GEby|gW$p7Dnz<}XwcBT8% zeox~<*`=0iL8D12jEal;(kjGM7K$!fAm^4^m2U-zN{rM5!OTMDUS{q>(1wE3)(O}J zCUCwSQF7I)6OG7t{Cn0_*Gp>(|DilA?sN$lU}jEVis;+mwCV_a;Im+mPvDp1I~?eb z>|1qz50c#F3JU{K)x2TQEl(|$NxFWi9Esv*S2;+Q*Tj{=jE4xpTV4GCI!fp@76fLb z>;=mEqk-`_B)c(RUIuDs&Bgm4h`KK)!DU<``_1w&*mN78LT)e+Q`K*pYe4EF8e{2m zZ+NYflqc2sQjRp7(DfDtp%P=ysvKmDMk+Ru z(~4{UP-O2qDC6&Bzv*>Wn*dsV*)Td-zgE?jU~1vGc`8y33KDRoPV?|xu66Sr*u?ms z9MCxET_YKmRBWEMjXINdnwC@gL#rhOy_Hp|zPkWvBf#C-s=%PA^F$@spuAJx^acQV zyoJg@lmHFgGW6DOIVGb=JPLFL>k^9;U?qzDP;+!dadS6;KC99{-VL zJcmbXZya^(G_pI0JL&%pI&UsC>BGTnTV*Bsgrw+YJ}~(^>?~3G&Nt;n940gjPN=?^ zvdN5Pg&xf#PH^eo4_K=ro5oTdZ7m-+9xboBx)LG>0xJli|CdEskLRMb&PS^ec1L$8&V9n9(m=*Yt>a(_rE}wo*EJ=KO{?`<@ zhVdvP0lkfE8md`Oh~ZbUw19ob3jkbB&nmxWJAcC_KzjN$l5~Mzt^=<3w#V^~;~}ZR67YewGRGg?w#;PdGygOQA@0=Cg%~E!+4JL(I7)Ah`tLl>vn%w zV|GCG8a0~arqT>HqQlZR+CH&a+_9NT)a8WBm+%l#sPSLRy|lYk2#fCy0y;ToT?~l2 z4bzF1b}l8;`xM#|l%AzD_!cQvYb=v%U3++($iN2Ytb>`$&V<(>U*wp{wR5J71AISm zif9L@gu4Y3=l4tAxt}jV6W9#Q&(@gyEZid6LzYk=fBWze^f^ZT{x{ zm4syZa3q$Fbu44w58#`>8`(>hg4CV8IwTfEx?}`z=ZM~X3S(Q_Y|2F}c+v^&G>3jR zg_4E~nJ!FHj@vK|785U&4%MOwd%ZX&PQaezL&4}FK+(FfO#);&dNd2k=xv!Iml<}F zhoJo-R>?PJOjELu+fY+bFwRq>x0$alow+q(1ULm|<@d`3uFz@5M7M8lV?xA}J)pst zf;l5h9I13?2V$WDy=hOu1_ugj!BGyh*;+Zf>+mt_e$K6!P`2o%%S_WFCh7iAoL@t# z&=-3zCd1q8i_FTNEy4jT>6bJ08QKs?oWNRj^}K`AHGsSic@w1bYbI;7& z_rF>5zxCE$y}KoqN>Y8LDs}Iz>ht;H;1XQmi8RZQD21qFkDS)Z9yEy6)Sit1Se-}r zmk_##6!0n49Qjrt)5)zs$H9ZT4dx2okCUfb(1lx*qhdBnz;-F#L>M5B*Qk~w3c*JQ zN}g5zl+UgqT=P-m&7y#33ueQba5>*Jb~_|!wdS6M&55AQNhhA4SaY4%b$EHJl)?g; zs%&EvN+q?$cW74@JoulAlIl^bd>33ra_a-{f zj7^34JZ9+zi}3c6kjBsD`Zh3ic`th(UxA7nLR_vseAV}F{S0RJF=Q7M{8R4Sbsrd? zN+3;py*d*`#>1oePoPcPe3`?qRRo|a5CnQ+bG}$yNYog_2FCXi@ZYGW>m6#KAtA4b zf%woZ>X4|nMI~)zR==PG0MIQCFi$Q_haE9X)&f@`;oRkHMtAP;gYwZYD)E%xqQ^1m z)ky{y+#;&v-L&ZR)J$n4f$q(3jn`77t6Eu%r+DA2) z=TJhY;40K)%4o`mo1mo8+FB>ZI|()mLhg5?3nyz#r}v>fdDGv3+$3eGz1PT)w!+zY zGDp@iR^AL6?%U9q_TViULh0E;jQyu& z!%5Hp*e~Wax6li`%`_LY#F&ZnpbjSEZ~xBQjqqT%hVKJeIKi=fZhQua-h#1vm_=#{ zBi1oz#v8^z$ehl!_^9l)9ZWIOEmJ#M^aG+5l|LAd$5^Dc4;h0OQx_>AhVay77CCf! zU$Y$qN|=+w&6{<@V! zz`-l`?Y>k7tLYj=37iWOsYk4pG;j|w7ZT{^kFv{v*wvgLpX1gBYjDoC z#V(7}cL7=sw0iFiyckFX66>>u4q2PDe*jC}a9ORG6)fGKRK>AytdhH0C!T~rbX#7#<~JZ&7i4ZWN6u>an0?}lhN@7!h4A`Kiz~_CgE;^}Nj;9e9iN#D6mgI4 z;A*zjF*E&lZa4NW0oqWIk&OHXK7-Cwv-PB!g^{k0{kQw~dHovDTR8hha>tY#l_XKg z?uaWMU0OZ(Qg9GEoJBQtPrFdICr^x(o$)JP{+taz53! zA|8^(>am4M?wdk($wYjZxp3zriTsuYjIKsC%AEZvahJ>s z#edv7S7_hEPF3}K*lXrUt9()ztE0$x?B&rUhW%?GUAot-cl>ko4z}21OJBV=4`?Hg z+%rLx!ZDVHFjTAYX|}zaY}VxA3Ld_1r{s4J#r>u{J0FE6HzRqbGzuXT10knM)0Ma* zrTa$Gax}Mt%K)0y7Nvu-JS22IUTvThL$fAiKt&7Oyiieu$lC%HwQNNg#RP{>>{)rY z$$Q%+=f=@n+nv-px~1f z_-PXGhS|gsI%J>K1QRa(ge-%=Pa?MwjIJXJZ2tks!kT#79a`pzGju-PI97TDgmThf z&M?2>E(iohU2A|V>(`~3*Mw=|3abY}-DygjVKKEh7bI2*fj-^G(F{CaRD5@Y>{X580$xp{?+&yb$vq z&AwQDvk-z3(&fEDyv#lbN6D{fmc6~-rv`@ghD(rAm(Bi;Sx|rNtrwl<>=`6-xTw;h zMphCWg%zoFPZi?Bx`Rk9Lb3@Aw}|l_{k0~?Vo!DyII}{THykfqm#XmPQs@37*KG zYllVicd0is8eq4UGwD(Hovh%Dz@z)GPYU0k0RGz4LC?zZ=Sd;!UwLm23Y9(VP3Yte z%uMKHOpGlI1nu1Mwdmi9Ss57d**F+=py(9soZmt*;nTlSIhxoyQh(y;Wyq_?37I>O?2> zmVV>tg#R84>aASa(Zc56bU@JB#KidD> z;cG$tmN(-&=88~^zZFUc|4qeQ-c|NrTKq5lc<=f@)Z>lTz}djs&g>88zx4clZb%y# znpivGb93X<$-3A$;p6{;8vh+#853s%a>E^iU+y7r|d1J`%(8xz@xAr&ip>ceK(GtnE%X*~Hz=yrMeYi&G#(Qhy^>!iS)N zCGx3$HdYww;hDOJY&dRdvC7^)wGfrp68f|s+G!4&%~cSHdh3R$Rofw?6vH?GnKg+0 zq3|e`mC~{J!ar~ZU^v$Pq<24dr26q%^a+0o5f;*g+rq(~H*T&{OV2i+rx*7J>5wMY zRDH^97DOsT*67JLO#}m3t@dQQ!5Oy%f0I`{IWVi}sYhD^b^Hi_`E(E4WCF?ocm{wVMP#k)>2CgbAD zA#FlplEp4o<>Zz!@_7zdX{Fti#YUV%FAzsATpn=z%$Cw75|9hIUqeOxe?Awv z2tGfDxN(#xc6zH`RGX{TD289N zj82h(5$eqlzv=YbB{LMm@11vw46INLzZCv0mmP}X*M$2AuXpYI!|T7c^bg~&`2Vw| zU$)?X+tM%N@Tc_u(9*wp|7+xb)eZH|D=D<`$rn;&2_TAn}UCS-Z`+)zvui-{YLlx z`LDEp*L$P*P5rN$zxe#s55`}%?yZk+XZE-L{?)f%eBb;3Uh8lAw`;av^l!QEuG#i2 zuA+sl*_#+_1#F!x{!ag~LduRVChrF7AF%wxoBj=pvZkDZtQwWFg^h`mtcjbVosEI5 zyb_I|owf15f#;V&{cpg-!0|75SpF8re-P;JT*mj(zXbWerF$!XANsqX-_L)pS>LpU z?G2XqgNdEvFL>UmIGCA#Q?ju`y;J?J|1REt@?fCGX5KY zevkWobnoN%d(3YTyBJaBTe*7iNf57%f?C)T_%k2-0zuI|| z+xudb0iXTt>aUVtbM^P!`UTrN)W5X2Hz-h=-+w(lDMpWU5; zh?tC|+;4aHZ|3Q*wZs1z%Qv6*4>$KeRK5SSO8!rJ^(!fBU}N(C;h_cJZql@9SQznX z7~gz5`}=(*BfHM~V%W?HpB0Kuz{%+Sw(>3W?T*mEUfjgO%>1w9yK{dpd#?#a_uKCa z*qT|t-HpDjn4L{*RPo=O`P(Ag!pZ5)o&6du{@Y(-py<^9V#C7pmUv$bye+{^7~hrw zZ_-x$msk6h{!9A*Zjt^wG%*7{BNHnt`=50=0}~Si%ik+=s*=!hL5h+>%)6X!QqjbP ztKn9o@WIRte5%8i`LQJXP7JY)(*HYBH z$OWBr8v#IEYH2CgW@OnHqhM*qQ#H`beNh6pAZ}ep&HQp!K03ig|R46Bm6qcRY)5UqSHCoEb2hyQ7mz2 ztwNF1?Q3ny$;9|K5i0pjbq;uHdd^JPZ6R`9`U#94po80@QXZ5A@lDjYQE)E$WGSByOw{&;JLNlc&I z50j~5Vuov$6OGl@5vcd$?S(D2yq={oa(KA7@(9c-Smre(b}0%!H~Eq$heg+o7LPsO+ch$4s?)@V+$v*$^XQe zx5{8NxnEcw+H|mqgS|dx0klX$*4-ITpua3{-2VXPfWiEM)1OHJ{^a=B2RRoB`$xV~ zGXPWEEU%K^UGnk+M&@q3wb0KKQ%w2@mO7X5+vs@#3{zV44I&g=FJW?l7DrX+9OHsu za`ib_2uGO!wOE50#YU}Tt!r0m`4u|F!t{F3jt^KudQmYY`aQPtD`#d(`g7r*&g0ut zBqs?s{Zvx;%NI)&r0Pc2ag)7WG$14}6RA+9G?FQ#i=V$`mR8(PCOsL)OOh*3UrxdT0G@An9E!#W z3H1oH33DUl6#}D}^~ijLwo<_P;tsfq-f7=Ol3oh-P+?N%G-!}Byr>reHd3c$IWxG{0fKE}EZY;IuRVz?7_-Y z8aiQlX20@Qk90caS$WiagV8)Y?(DQs`u*q^9Q&IPd4+|}m#Z`|7nXB-(n2{v*bkdmv*?_ymypi_Q78ft7> zaBP7&7a4pEX|Z6s<%dwC?!u@zsgz8JJln$hf^7L50)2;{F(!3OJ~^f_dHVF3_xp=g zk%qQ{Q{YgBtxw-d?xO0?sig2TQ6XaCI2*s@v|?Ptp@F(|BHFHyjtftG>-&ON-L_}9 zD%ZIK&s7qO88HV4GK&$u9g*Onu;aa2O z3)g7PJHES3v>BihrHi#Tv!ElxWt$8WvlfZsG8FVEpm(mB%uU~c*(yM*Ojc;5$)?HC z93H=}G!X+2`O!IZfJ=R2B4hMlajQ1$lethE?2(4|a5r!SsDPRh zh0pE7tn-J=(|HGKWY#y8Y-D*iXJEQ~mB6u0mAv!<F?T$H2H^^5+tK{sDBBgnYfGFiKcJ%e0qh5**7d_>7d+ z$p1ljn_55ID6u`C?7Ev(buJcY(dc!Gy=RZo?-H&yOX*5An4FOH5~^P_vz}5W9HeOD zp@zsDP}4GTVO)kb0f6Y6>?I{Pk#J@_NivdifoIwBig~0@xkyX`=Cs6ZSbuKBv*NZ+_qu#ED$0 zaGU!Ob9Y2j5|5f70t9A-BivGTHWFb_6TAQuX0<8?NvpU7KjwrP)#E$;fS4MA0ACs@ z(lr;szF_dc?(BYS%*>Dz7v?l&eeh63$zC1p6CZeX*n>rhuxXW5Dm2!loa3?Q83TF;5)+}-asE_9b;hWCqS1X;0OuL z4y&)&2`vwW&#M<(Ar#qmVaT~*Znu@DBxfX)tUe@58wAnRQgJ>}rGuyAYzfCIuSj*1 zp&V`jx|B^I3&Vuh?I#{yctPO2gq(w;mIPlAo94h2c6-USMfB@$gRZlB2Om^G$XKsp z4?a7ijh>Q*s;itj7}?H|^a_s{f)98@AA;;TE>q6G0wmq9a?;pFda8du&kRXZy^rf@ z^Pc|^fqaow+?l~%uu^EvfR&zpM%GI1cFW(Y{9#b`LyfvKcs<#X6rdTgd4Iod8!~0v z_AIJ~Vj5n7uN0rE zSp0_8j0{nzOUdu~R~+=fX?y_Uu>Fx_D`r$JdvSLL{Tp{ZA9pG7%#XE18ufmVTj4Pe z_`NVICfcc}8pMD7+VU)(a0#@zvxCsP0W2@;O&6@u6{T31WUCUMOp<-RpJd(HmGFHf zHi=iP$B6OkV8#mJRCOi35cD<5z0hQXb#B~hvpDCEpQf2JIB>MKeS1{#$y2xf$Ks{b z9hFvJ4=q7*fT=-q6T{5>hRR=fw`S1H;a9s&^EI0!JIy0s+=0Cmd?1Aa~1x%rrrCRQy0S~h^vQF!_a}#VY=u& zu!9XrmqvZ}W{30~5-Vo@Q38ev0fzPy%+X7TJ}QXpl1l02K_}sGX$k@Dk#!57?=d7x9_u8$D;2bFWM;L0tmuu$yA5WA51GhkKxz9Gn zk;ACR$FA5=LtKPbby^hLxCSKJJ`gZ$A0OEubH)7N+1bCZ#A!%@_WU@KB(o7A-NByY zG+WG7Kdb0YKGMxbFyhL27=PrOt}DsBCluwl#J8EEYnLPhq<%s3%#KV`t1k9=0b%Yb zAp(6N97aN!A%#QB_L&0wl>`qPgo(f?!IC$?nlJ&e%H&h%5RRvC&|xqJ#j0ZyTbb7D z9?T?c?I?+S(b$E!DUAic$I`q=-aM!rrJTS96*EEGt$Kh7*(63_3&D#~J%_qd@q>*Y z=%*c5ci#eqsSFOxZ|AarWw~mSg=&~=bYdrtH)P11dTbgGmC2DiUs6gm`%f91D?aWJ zUR6p5QE1;ks0}_CoWy?%$@TV=*XlrW#Nd zv<}^z*fXMTe+%DRyfcS#20yZVS>aciNsF(&JCCteSdeK7*?d1Uo5rd}%{{_vh78A| z6GdL&FsrABm#fJf(AUniZa#_ZhWdYC#_`O8ZrKUgd9aHfpf8m+#U$fqBtq^>`V0)} zCb99kFEi>V{qc@+s}r~W#NlAZt1>iK?mk2xLivgWKFCftp{#5@Y0Ckd#E&^x%bh=dm8r1C{rM)Vf&17TX~xz_2oAQr{7 zW@OSL01&vZA>w9rohJKiAL3kf);Zf%r!WuVf^xI5Gc-OQuQMDv6XFf%-KpFzu~I_)ZNL`0U0Amt@EW=pfhY z`8n>uIaLxR&#f2$i{x{JxK67>F%vNZT;oCo`Pc4P7v=et75TYFh`Z7GZ;8Uk_|#;5 zWKpIT&yeztd`zE39|{c(gmkNsh86A~;%3Tg6mN3|YQpi3*ivbW*_>PKCg~I=8v+1T z8yd1DC78W-%?y^?V8@=|#*88YJ}7o;CeL*{PvdZn#_lDA1D|d6it8hhHWmjWIyCu{ z-Q?L--MB5jzDSbfY1zwI`kiHHxa>h$M^Z{p%RQ#Q#k?EK^}e^FoG~*}qI>cJ8^1Gg zh(4dESO*=?BFz|8bR49VsC$VmAegVo%B!UWnG9O^iCR{?rEN*D=slX-TNF*n5Z+t4 z5w6du3Ba;j;&x8E?t%COg^;*7bPDjZEN%(M9M!o9kUcITB!yGOYK~$k~MQ)C*QL#x@$-IX{pgo{3a`Gb(PzU$gOl?7bt0VBO-$mPxhcW?-tnaJbgzo)@kT8wQ-LE& z$U$vqd?Ua*DG@fX$0~ZzN4jL6tY_#U(dR8@eUHgS={coLC`SBqXrL4bt|8q)zG~+a z1;+B}f4MY%GW5QLdoWlKe+$f@O?%gys*(Q6n=Z}+ol}rgX1FdK&**Rtu$0`u`g|_? z(37zCEfAOZGB&ZdT!Gxx-LQNLQ?vafmm&?Jga8eLmq{$BBzO$&8;7e|=iNtVOv$?Y zRuRq@o4^XVQok?0X#jzD*Cp5a4NQ@rJ^~%)8645j!TLZKkGTPMZTGQF7frXH?J;p| z4$nx2%vfsyy56B92TDCI#7bFdh31+6)ciprh!M^0l(ta5J*)}snxZhnm-bj-Sbl@( zXKocBS8s-<6h9wJ$XAODlX}yutRi22Y<4`Bo#srfOA-pQa-}U_&bI!b=NGAQ4PBhm zMM$^4R9`<~Agx#(_OJ+q#;8q^hKb6J719O@$P|LN3)@Z#;4EMlT9@X-sCzC z48ceeWoVe}Yo;KnD`zHAVwIrEJ_OYawh7 zAt#3DY?X8&M#1UW?Ij;OAy&tr^QZl5=)E({=$)j&U(qXy@2h>WJ~@ecIoktaVlO;V z82Z#~CbKZwOR$3Q2GBd5skPC{1*oEG8h)}T*?Ccdc*KR;8Ln;8Ki=#0(i^>T9d0GH z*F;2-h_oLh_vmLmhgp7(@_Sk6jB7xgIcGik#C*gM;a;)ptkvn)p^+$gFqLyS4Waro zH`{vG7Tzs8=!s$jDhFj>Uh`8FLCJT7%oclV4EAN1Fq^9hlzmOCX2T{)WYEHsw<`hZIj>TTVc2e&_WYn=D+n z8T#ma=>3?Y7Q1dL$Qfv()7hWsNX;iceVR~4PNn3?3Iut5`E6X-J+-$B*-qK)EmT`< zFNOE8!}KIZX4w-g)mU{0ITK3il-Y!!PG-I{11=WOYA8%1Vk0#Q|8x1-D-WB@Hfow< zPzFJ!NV`fbBiUd9)UsimH(wGt-*w9tXGMnn*3Ep1Gd*BX^(0KdU5pu7_b}ShS+gK2 zaEmDB#B2seP=Xw(Dxl=~X19`WmLG1lww5awfhI&J+hX2Z|eKg)s3W@s}u;suMXybG)o2LmhpMF*s&<;xoiS$}bSyxh$q>zr&n`iUPlZphi^>J*;G*eS za{Hukm38J?`+&bu;_XSlfX|B#lS0?ux-`*I5_=CA5lw2Qifpv4V0x6Nc$8Kt%{)*Y8ums5o?17<%pqa zDN0RVxdQH!dZl}gg=_dX4op~T@&JN!ulY zlsEZl`y;F(UMwbs4uaMW#ZP4fN++qxAIVdqn}(wD^aZgiCpuXpzjDC&D>`kMX6WXk zI75kGPu8*38m3!TRJ-jBxjj#-yO6Hv(huBAP(v(SsDK*t_oMj|YF-Fj- z4rla>8U8A#OiKHDt6}7$Y_#}#@$F7iD$Hc2TJ!~3b)yP zAkzi`Ks{^39Y+{}4$J7}=r{|Em8|(<&qQ538UjR5SoIjf{Da{BQ!uoPLplIrK|dQb z(`mookKJvYb)_Csf!mB*McwQBaS_8o3&XiC9s_(Bkuf@<>^?|+!lnN5{Re1;6|~bf z*=_5!&efcLPCch+oo9kyj$5p0_>EBKCr@$TUIAcfzl}*DZL%DlFc-l*qHQjDByCx9pCL6L9dT3sT(J%B$W}GKb{{@u7zZ97BjAon zG4OP#_)t5^LDWm665Vteo3yGJw?EDXXm&F2qy)uXgx5+pI4nW-@`LkIse`N(_}PHm zDK6vLF1Q3~4e0ap)K-nEl2r4J2ZKN~Ih6Vbdl8NEYU|BPY|BNC9KSXwi`rnnSHd`t z>M!sl9t<$f_4+Ysgoi9M-Yj&S)x&~vVSO$`7X694MPSzsWWzp|NsBV!DTsk<-|!;d z*3%*Nl^F0BE4%1*+r;C-Sp+u74mLUxE@VbC@@-~ z;EJWtzvik7fETaCo^l{0a#)l(@`>mIgDBAZdUOIn8ki=b1CtbrxflQo*N50eU8+x5 z=J5f4RO-2M(nm&x2}h2_!c{$0W0U}rWY#EZzCrkLf+s?`Q^n&P^<3D!C79og9}ssHu{-)l z9ax+FBdr;}^vn{Y4w9y+y$wq{!I%(u3#0)8OQhgLZS413JI-_Otqkrn}LizYk$Gy;&Aveqg^$*q;9$mtfEzb zO}f(^lj`HsRYGpYb*{LhG~X8pCh2k#ayd8VCm7fHt@B}9Ng^KHv|9e#h zFda_EPx^aU2R7O2iIp**qaZ(#$Env?td(l6NTuW^W*|$XA};nU2PCzbE@%_)7UB&g zq5%Wo9Ah-_dj33{i7=Xc$V) zn`b$N4kLtI4u>P{&;8a4aPjs|5DFi*Yy3MDke z%z=IVvHOIRgtSe7v-&cGdVL)2PW>yvcwj9iL902j)mUuR zu`0aj$+VLnjdsh3CofUr1a}v}8Abc@JMoS=D6?s9tlXzaC`pE3qY7Lst;SKM0V_a= z<4nRH$@9!XVYTnGOi0CA&PeOym5&(o(6iNle%_mf^AkNOzu18LQ474KM->bhjb~{z ztQZ$k%-yGQD165Py1C)rJJcm_6oK&VAv1q!m5HxqYt7rqR1~GJs8W`3pBPqNw@iP~ zcdj30n|D7hS!rCxK9Dh?$tLtKpky$*#=+$M zBLCj6X7PAfVOG)nq#?KT5yDtA zw@mWb)uQc-%dRqbrjXA7mB|-xCq}uS5BckyS(Aa8mmyi5YN@TK*wb7rgDaxVNKD|g z!Uh%uY?Anbz2+$gas!h4fawsfGYMaGxtjc?F1$Ai>Xvr8Qb{1df$s)Js}^}-b=}Td zlZ7-iN6B*NCp3bvQzPPLUthCfNwiiN9JWPgM9NK5v1jGy;kJQ~Jmb={KvrUAlc)?k z;WL9QEY&6!hUB!^8YMp!fX_l;#Xk<6%`4HI72ztPDIJP+lB?Q}PF^h;obHxC^lC9M zpC3sb@y{*Mm;pidR;Sh9icM#!OTrf|wF3nz=w6M|U1p&u;5ySuG*l+WRGry@bpbtl zRtD)0j3Zt5Ju;yIIW4R-aDQ}y^|fAoT~0HDG8dxyv6y!Q+CS$O%!XyMIVxCe;<|h` z30h11=|eyqBH2mRAQ#$zEOl=$4zK#obbU3X581(dtl1j`K+tXTEsfScJtOzoL@r#c^a!HZ!dvSV)~Qk3dP z-^#B;geaX9=iR(#ZHFdWw}BJ0Csk&(YeJ1J+)1m(X_cWYayy+_QVXkAsL+rgRXV2q zovUQ=M>4yYBUYiF_Y8$Y*h@^3cuVO<5M{~f5ThR97%~V;^af#EAp^Js>p7nvZ_3OM z+-M@x6H5vk?NwZ#S=(5l8>L(k!2 z+%hwdHwFnrmqA!%&C}lS^*}7fn{mQAD4y=>G)Wo4?js{={8$!u+ej1h(}_YZ(n)PF zoQa>69WWLGae!au6^g?B%FN8BYT^jZ)UFVv-IxfcLf?Cg8AWQH=XgRA0${upE|ax@ z(eLL-vSM}4L71nspe-LtsC99}GQc?kjpw^u;Jx zun!iGu=C5uJ70-Sh2lJ%pDuaNKe$)LK_g4Qi-Q}hqV=&`N-rtJ%v0MhS3mnCg2(w1 zxsae(eh>$}jM!ZZ_EgBS{=O|@ZlJ#^E3>DKTT4tP%*-Vf);!^5`qCn&J^+z8vvczD z4D$B2%5-5#A9(fe=dG#LHeDk82;?)$lBYdnna%iS^p9I!^>lqH-#dkgrSf`D>HV|9CGtqnQpmLfsDv$vs;?c?FOh^sB7<|o)uxqW$n!Ki2rW1<3RI4R@H8nEqb0Tuddt1rmvNKC z$fwiSH98CPqyYk9qF}|t5o*nw1`K}q09NvAQDc|;1T_i+vIYLyRe)$_HinahjOK=K zlxepyDNjy{t%IKVDrwN91;N|OQz_>YylTz)-X+f?EpHamU_PIJe@e}WKnj$zD>Eez z1vae#ASKLE{|qtCN&xz_+vSRVU5AClx|MBkrR{Pp_~nibUoehKBe+`Og*=`I%SQ>) zbqc{L>J-f9a*{;dVzPlEh*FzAIJOY5fo<>jM1aU8%q)#H>&78tbFSp0RLjKda_E(6 zJ+z*X=bY)H+`!VU1TzP+CLs&&4_V0qj^8qU#4@Ae+ZMAD&3=;O^Pne(Lm{2Q`g2rG z)h#u1r3r&EKYNiOrTdWR^2T|aN$+qx-l@3MNs?ZnTl*yth#BK^A=L8i?$MH1T8!5p zB6b#B1rp}`RJFMvD!YvW6UyNH0I}_I3eC7ufvI!FZPsKkQK;*;cYV7^Fe`i+4lO!x z7eFrsLe=~Qb&MV#c5I5^aZVQ|e=GJ9Bc#S#+^!Z| ztio3O?v3bEa;zOXKT4XnH|N}eLy~5d6`N(UT)?`o+fGA-H9+)1w)DI$VeW;wWEiP( zpzLGne*#23xQw>rHRA{>;&9!N6yCSs7a@aK1j;XHee^Vd$)~h;tx+4Wkj5YpGX&NC!8Nsqz_)SmA*6KY%(SCj##88HuXkL>xeGbnzxfA%Tzbr-daZH44io%e|ff8-_nFp*SLv-%;u$P1%u`;=ECrWIfc%%c*p zto_r9E8OnMs)6Z8^T;t5DOzZM7vqd@2*Hxv5I17TcvTlKK^H*$YW+vL~FR_RtH7M-b zfR}DX7N*m*DuYJ0?Tdgh_u;oiIHq2O#!Bq?h*U&$BtAjkR@qezy~+&&U4ErR+-=oqC1X+)MFz16f6fDY6V~+(X`%< zzv*HI#0KWNT|$l=xjqBMIBcF!l-o&#O)Q57IhWq?#qO0rihwesDD zRA5(a6UPIrZ|`^zk7C{B4YKp^)`fM@MK*a-QT7}1Hv?r=@}Q4M*JguYDCzjWh<(gq zzFMszOd3;?CIM{n>KSV#GZFCH#k!m33uN{QoVhWt=klq*)DR?vc$6AkoMNDT&S0hE ztqkFp5ug`#D&*T`8#SrlV>b4?AFw zJ5&CZRdR7KWy1*snyfgAQqC}a#oAjjP&Hrb{*&~*HD1hY@Jm*xcM3p5q#8x-LZrxz z|5McXPRr7vqA!?8MENRLN?8Jqp>th2w$uTLcjv6AV#=0ac zIK5U;eWAn;B=XjxbZ7zPFJ1Qcwnvgu5T3O{X%*uH#>%E2**4^}R^sg<#4!wN16l}k z2HA|y`)Bkb_#`F?Kdv<2?ZeqK7!2NUU6@5TGAjgRtbUU3wngN$?Mb4dvOLjq0Dv?SZ?M%J z1D`4WjbwnrxSUvZi$Q9YPluio8QhUksQTW_Gq0xxIb*cCaSE);yPsV_b!b)-;j4W0 zry7Nv-oVl4gq)jNlVGnb-I|eafY4>}$p&kr5qi<&!{cxN5L%(IHk_okg1L2R-YYhP zV9~I#96|m;E$_#UtF@plMGdnw<|)*LI%J7yk@&TS!`V|~fhc`?dkoZ8VJIOz+M%(s zIW8tZY>Ov?q08Xgxe2|VYgc;8rO%FZOW;P(ksIyF?E*KoYV%-(G!lI5L>pu|Jk7mr zZYDZXqZAAu6oCQmanzJcabnVnZ^3u4tM|ofD$L4cHz&vj!Ax2VqQG9pgVUV7;@7*S8KY{)L=jxIMy$V9OSkMvXjF5g= zS>{gju$SXztC}vXV7FBXSqN#iL33Etj$RAM$U7*Tn_cM(1`kINx3bjM6O#I2C=8i`pR%8 zV!1aru7>U~{quG+7BMiA0K#!&iD><6V?@*zHyL@gHz3h8Cm5HFf9jap2Nq?yy{9pc z`wN7gA8XeuJ=pWzU^!Q;*27-#TDUF~O-*=5XG+2ycy?!X+L+6d3rwE!coiD4}D4p+em9XoZP z^Yy28JYpN{5qNeWJnrY|qgzxTgjo7Q4|x_-oX*Wp`3*?}Ms&fW1pmXA6FhC? zWo3j$Nk0lFb<6M^Kf~g5MBNS&S&O`{ok2_Molz;IhIm`@8C3!@@oiY*{zDOa=pxR9 zDk5Ikit0HYgAUn;gpB>Avbg@iR{ga{j^5Y;F$$}G^LanWiHw1UO_H&Mkc)f@x=3@@ z8EZI+X|rGHG<9>;PXK*03BY_LIAa^oL78wcOAViT5|#QhAChb~@EgynX`jG`){o1Q z(}r|2^L@h8>{J?Ncuas+w|d_~?zhj}98#+Y?!iCGH8FR{+t!#8u6GI}B~n-B-ZXqD zmhM+6&J9epc+#GS=fP)f1JAk48W@x?>Q*C=uA>V-5EPMXwg6|CU+D{4D1Fuo9)N7n zcLWt8;qr~ahMbKa84Bi_`&zEQGP`OGPQ$v#i(Gx%{5?>@dR4^}&b@`ajQ!mSt+~0MsHD|9?4JVqp@pg0fj>d4Z$q=b(CxN- z2Lcx-5G)3Ei!q#??3}|`>#*JksI4LY^76ScQ^P}yn`aXSydg)ByMV0|Db0}S88+hW zfpoE&gM}B^!`+=s?T%>$*;AD+#oG2>%ZW|n^y~9BeqCg>mLxI^h`Mfz?ZS6n{W*{G-$nd>K5@EWqplnv2PH(fYq zh`Y=Bg!W&Go!J5hGI>$cf4s15_sb??FN%;uyLC{ey4kOv+0JCH03S#h9#0fEUW`N| zX-7KrQZ3=kK&pgnTyVBb+R)0K!WtJwc2>+(*2EZevE#dDPwjMEb#i1lW^zVgiv+UI zdw%<}I8f`TLx!XxJj#7>q@9$46R5EdPj1j%LljO+es#Fh40!B!!5`Vr$r}J^0wjpz z%6y>bw>Wx2(N@{LD;8vb@{}FKeous|H>ZLdhX?|~)Fy-<)9i*YkFR@gWP_Qip##B@ zc2N#^NnQq9Qa2X{K7D`Q8#1-oXJ)%>La>#?H1quN$7nz5CpZ+fd zU#AZZ=xtZb-1hMn;eZFA49XaJ`HS(OsTxyoj^LWa^j#T&MP>W>Ohu*08K%|HOr_nB z_tNN-zU)NB^)`#9Xjj|?;-MYOnz4S%KxU&s-}1}TK?5<+rPeMi8S{*N2*Q(4`270f z<;?D-`IF#frl@EtyJ`kg6kfWzS<7I4AfjsfbYFf4xvY*PwihLTW{Rh6Y4TFJEN54J zO9ds>)x(1YP*2laGE5qeca+}@Zw?qN9c?TjoSWVF2gFDD^B8*-KVXXXGuoe2(tr!n zro)z5jI^Rkih#ZCt?Z*+zEs~d_+D;b;LWtY15eeKF-D@pc!II&MizMAz*9W(0~R`F z;8-5CMk+^cE04*Tz--mGN1osGm=Q*AhTJ)`!6#cr;d#QJ-s~Tf(7yPYq4452ha^F? zvlv$o`+8KdXnG&LN<8ehf@>!=XqmI877FhVyiEAs|m`aGt52J63DiE0@QC16IDLHyPYK2%4W#r_;b&#Jxex4 zO@z^)-#LLgb9rOJBq|d)C$VlTUOMXx3tk(Oc8j)iLXPY;W z#Yr;^kl*)jwV93ZP_okop|Q{|sbpGSpUpz2HX2CiZ)SSWdqjyyPqXKt*Q#&$AHRRh z8{Uvxwognv-K~^=>Im8E^OQeik<}+p8TIhysjY8oH_PzGoWUQy4FrASO5Z1E&$rz@ zJ|RKlLp}vFOgWR?@gX5c1g5mfssr+UnQI2WYVS-T_9cC;+@z=s6piO5)-qkC4h!%P z3absH-*YD!^w{h`NW_^Tm5Rog>F=UWT?7AsboS$BVT(p6PX(i0huz8Jb*qBCO0gbr4lq_>_^pQO45g zaT7djL>&&F5+-n#ffxg$@?<+V69fK8ezI+ef)R_;_K`ceP#+%;H)5+)gL~G_!#x=* zOGzLZlV&5E%pS>RAlftIdvL{T%;e_=hi%7%>j@hF3x5OAqHbb-scv^9^3dy3+^Z)^ z++*+)4PN%}N)e0WP@=vSYQ~Dadl>KGE1p8ndVrlztbPRhL1wYxOL1T)Stk`G+mCC- z*1*m^vPD^Hoh1BM6j4>2Nrh8aN~0D>f&+*T05(>0=Gp7M`CS)MV~-aKxdQNOMU0ys z8bWFPK!TLY{ZlI0wX=W;00u0bA2&`yV(_IM?25c!oddrpn}(RJ+qF5w-^DEDUkgQ? z)&9&XHen$fyr8nm-SPHc7Z@6C(t?@H37CtJni0!tkCvOG+fTH*l5uFXr}j}L%2ZX$ zP4m0nk3uzpHEha@I#E^^w0s2Q&*kyx%S!dJD?2k+vfDv zo#y&qgxzC|C{dU$>b7m$+HKpmZJWDo+qP}nwr$()K6@r-CUfr1x%X$KlB!fvsbqbt zp7(7v79c4kw)(uUbrFG-5d~keK9_*-tz4Hvm#pEtY(fEtFd=D4G>`hl;LAzdP-rZ3 ze$B#dNGUDPRoUF09XLYIA}cZ!4EKrCdY@uJZ0Zky49e6y7%I*Cx92(hDWVOZCcz?e z1}2>!fWAb!;G{Z^4UAe)BAp=s1jCE{d+S4#Q=iT3SWb}~7hXcTvUZvFpO;SB#_rS`VU9@ ze`Qnu|AO{E`4l|?EdvVy2L}TID;wK?*(nAl2Ks-b^1lGpzcc?6Q2poOe*-E8mj9cd zVrBe)`l~^^m!D!{V_>KMFF(b|z{bS!-+n4+5FjCl zL23pW7MUr+PxQ9Is))caOXY>Ce2Q5bjlhgu2xXNFuui{cu^J)SEI_?R{yDP8Lg2F zIHSu#3a27A$Rw&LNha2cTozfJ_-L4Byi6pu9J+px_7xus2&05iI#l~RXWq;p4h~_j zIWy~tG39YjC z>Qg|?-a%Hg!YFT+LYVe#J(|QasD-b!df6!|XnHnQh=hld&usTYJbIXf%i<9~Ytr`Pc3 zXMoL_T^;9R!7Jo6N6l)f&qB^=kC_wkE;;~I#By1?tyi*`z0rhP76oJzg9%zij$ z`bs%d2`eQUdO8VOEyZKe!t~gg3w7~Iv%mtzmayy*U=N0mo*;ePLTZHZxh9ZWEYuQ3 zSzeC`A0Yg^8Bthxj%_FyokKO{s;aq#TG`r52klOb4=xwfxO={dnX7OV`v<>Xn1y;h z)nrkjZ`}k@elZY2nt|lP$b#;Bwf+{o#GTLYKJAP|9&SdmNOAMfMc5uerQzSAD_6%% zR#AT>$sty$+JKhS0o78gbp%f0UgMSwcwou{#l)MC@;blQY8TFv6~3AvcgEEYSI9k; zE2P~fhaR(E#Xj{-X;JNz)Q7mR5xd)Nj7z6ck{uAXpmo_IAB5G^WvHhUpXfnfWIGa< z$1chaONj|Vp!%U?g72iQ z91ZXPHUTjOa5Im(+(cT2wa4HYY`X;!&Ymi=b0m-v(Rh4Jhndmxy#Wz4lTB1eobQ~f z;c$WqgC$GE)CQbFv_93T&zdTNgJYfY>`wvJp61XE6+lfL1L;lHgKj!9oHmzwuor)&**qi}d49*aFKJ zC{X^Fv}i9FrK&_$$f~|zN5w`xfImpG;_zXEsh{oFiJG@2Uc>O|K+&g;yuOwrXSl_R zZ7AJan#dtJL|KnI;Tz}hX(D27g z1Y&lSOd1!QRI(9C2D?DF7n~#1EM7ThDO@d2d-D@U!Hd9(AEI|pog1c9F{yUQRB`qx?+ItMDl04n}d3EmgqWeEWRnT}eTs&SoISFONAxfao< z^S0jqs z=H~90`HaY`TQrr$ubcB>C3yd*znTvUxEWag%@M007nvDSX*GJC8pF{h%+iy4ok+cZ zrMuyc@&kl;>9VHq9o>>VoA0X<# zUR2&lS`lU8_%y+lcXqrXwuonh4%WSl`zm6b9&|iyJAyKvXA;XA#b??+JD6i*^4E|z z-*O&Bv%c;+RkNGQ<~ln7ufB0pGIS$FD#@`WmlkrbYb%92O6>&#Vk8`yDZC&CuJsg0 z65uCOA3R=HbVGW2nDoO{x~2k{mVt?u?hAFXELTlsQq9R?s=ej&X#}ypxuY&soN1x@ z&`Je4dh*P4X50FnXM@aov#O0KIj`v+nGwZ2^gJ`ym0>Z1I^qRGUAl=xD*^lZajri> zu<(Muqr;X=xHuH(t`}``Q;LwxkK1$r43@rmV%xK@piL4xHJif<0#*#tJPt<`$3+iX z@Mi!tAFKnmk;&xr_I;M=UkO`0n9e^G1wdO$Q^gx?&$nAl+w}ZG^H#aQ%P6zxEL-(gj*O-O z0W)s)`BX>*m4zDdg9u_-M*=^74NQJiQTA3skNOolL@yVZf)5~`3!78b0(`}<#;O_p zzMlw6jTS#M*&a{yb#49@I+4D{``i`fC=IRvfjD9DYVYi~{kg<6*g1ubEW@ zwdZ-02-cAdBHf%=xH_DI8(SrUwzTw6-tay7n`B8BzJdxotkkHJPqG>!0=;D&AR}a` zdR004b?OEDkq#E%`MQ{an@T?vY7le@EH~Uj5utr~zt0<6PICM}v0CN0%buYMuoF&} zE<%K%<0`YV1*tM*M%W43F^b_f+L@?0^nu^*(g%&asr%p7-^2S21oP*!q4t*-JPY1* z3LMH3%o{#X4hMYz6QG9H9K2^LXMA1FY@ej!WOx*IQm@=@YfTE{XOPZ`v=|C&Hxch~ z8q=pmvkH2((EvsY&&_pTq1E(u$KOnjWi*h?<^IZ#fo;wH`rduk`6M#DSD8Y`F9zbo~vsW_Uqqr z1QXM=iPT;Rr3G_ZND!+Ji~~7!Ud=!}-iP@3!4-fM^so>5a-1o)68)R}oNkV2C8Ub) zZ%CoQ`-p9_0&81Gd^VSN;M`UbHfcpYcJ$~oGO7!WrIN%LU?!YuIvMLtT&B1Tv-(`9 z_mF!Se@U?yBri#PmlIt6UJx+vW5VjxRvnFdt>t{(rb+`7oCJOA8(n>!!Wt$&&37uO z+wKwmL^rH#^iBlX1pS?9I)~GYVj7lD1mvhBujE|F15smbYbJtmUcNd-73X z|7z1;X3SckEDI2en3xnM{|B#50Dn|krEsVHWS*GPB%$;e_GHm3Zs7EY*|j-kOBPz? zHf&9;#44jXQv4_O%ApWFW+$rWT#i%;q}nRUCiha2I$mgASls9@ET)MioZ~&yOsxLi zrbk2XgDAyWijDFoZLzT!$V6ZaoO8beJ{|3fX|;K^S6LCsUWy&$TYYEpTBs8cF2d=D zb&jAExoF>SyT!qs->3!ZkvHj3D4h`zvrHN#?M@^-DWfY&D`eJFT$+0jT}%Vnrc%ws zW*dUEAt6FQKCU1DfP@=}wgK*p{Q{wJylx*7g`v-;;grE2tuuvIR=o}9Cr-h$H6A-t z)955{s92-QW3t6kw5B?iy?V(XQU3|BeYi{4Lp@od<}zf%D4z#^C&d%p`IX&nh=@-< zkQ0Y&>G{S6?WudDBcX!LUaDpazQqpKU;3opj)uRaXa_7U?;>9%&6MFl9+oW=3Ib~o znz*sApt_00%Z_FT>+i&}6-0zl-nJNvV8GeuAtJVDrw#(lF)a-^$q=OZe%I#)X|d__ zT10k>&r8-B{(=x#yMq8ocwa6u5t^xMXY`#ae3r8d4x5|_dtpGAxK!WnSp7U8LoX{h z6YMC2&cJ19%vM$|x|ThvV8kfbOk+OxrVcackONJD>L=T)6NqqZ)bqm6K1b?|)k>T5 zJ^25s5i&KMee7y)uOsU4?(PQuGy?5eWl`?@w9^(={cJs#0*E(fi{-axunJAr&>5U% zi#&2d*CeavR?vn;-IR0ny)Nxq#a0CJcTT4P0>3K3IK5vnA;L)tq0TD3D-*z)2*rQ3 z*7T@5?4p%uJ{xq)&SfYr9uwN$pb%B(EoCzlub%OO31#-?Q7 zuzc|481NgwdZw>i@ASLg9N22KW^k_F4}i~0=R-e5yQX*5RxbcP{C{| z%_&-_s0XW)N9cwxaeK+qCKM`d55pclAmiF&_ZrQdk^v96oD%!Op`U*4>w0jk)b?_P zyKPFS=pMJ_j|7fK-k589B3Znw&~fR=gi)NbC$x(Pia_rTnxXawVGknteQpMpvNC5V zxp%wfiypo+GA}YoLrUOsrUhhx=I}kHR=VH z0vdwI%s`pbuO81v*$dVjR3(y=dAeCz6w8+QzT%XZR*B}$jRwa?b3!?}-7e*7AIK0h z%W9R3A_N8c9Y?MLt}=@04H*{tLM=g?sd;@S`z((v{f@#LntCjJMypcW4MpcS{3eC} z+`+Ncs|Er5W0m93nhe})=tbIsYfFZ%?6Byinb)CKactE4ODSKk3`_9hj}mmyjuVx} zSdN#g{!j8brZ(17uhLk=TK;4KStZnn%URAzuv)ZVQ$=F-_ZX*k6i2ytRdJu8bLgz~ za464F5mu+>qxMXRLI)-PzGY+N zB2x&waKfB-ed`}<_7*YFZMGcSQ^{?^orE&vlR(u%>IwYJPtkw`W8DYVaA`A4*XqVYNa|Hb|RB=F$*4n9m&y&OV8mWy9*!Fa*@aF z# zy)=+3`{)6B5?Xn~Edd3ZC{#jHplD6-pl@8tUQnLftxMFKa`NOLr^&kH3+l6zGH}8- z$12TEEhjgHU8rhG=!|bv>48ypZYk;~nXtJ=UCiAVKFaWkaEak_v0M=haGQOoDJ(*g zi`yM2YwN>J;{onr$)&lFZX{oOxG`7))F?^Q^|{+~OzJZzG?@iO1iZ)1iOu_XqhY<( zzk33lui=1WbB*gUDcR}&etX>~QNJuhiFErd*^Z5tNR;{IY~NJ&?3hx`h=4$@pGG|h z#HFS8d!G?r7mdy$HVtr-BH~Zgp$gIfTII$rPpPTZKMm=(VJ_XwsoDoJd!8t*{FGl? z7!*1Ig?rZnH>>xx?hXj!&{2)n`_RPxGHiaUyhL1(`7-h_Gtw4nh6;r;hwSnR9T*-+ zpGJCwC)EA~nyorB+0hOCZN*j^%nD|;QRe$d?54o_$m-7OzNd6rc;DQX%aMN#i&5-V#o-?{SA9l`cAEYl3 zIN%sNBk$! zS6mdS7|3SS0`5231*+))*6f5dbb$eE^(yJ6Yf_233a_yl7d>pqVG-^$362?du2Y(F z1io+Z^Vg!CHFOp(w!jWjLJ-N9=09_4UqxBXG0onX zG54ds346?@q{+;bm?lO6p~|FPA9mox!K^Ot*->Xasf%ktyC}F)Lj8%T)*z(oH=~`w zQvQ^Xr9dScGqxIvNJ)D!ga|x?<1fyT;>ma-OvZmXaBoFO*1vofECArEqoh=PsMQ|% z6H*|B;9|bVhG^7;7C7X6$;7hr;uzO~fZquaFbyE6d|>4H<7h}zPAPZ&HXQlKVvn)`njyZ@4q;~{VLHaqHirO5wla7;hb zzq}gYAOFVwjW9(G-e9*(#Jb>6^C}C>2F$-~3YS$wY>Z zqm@a5rZOhdhy|COtL1)!eLxYeQ&H(`xu^55q(=c)SeqzE*AwoQ<^+DHK z5SnrIU9pgSN$#ceJbh&aj^ZF!Pd@mGg2QLjS7&VP-ezVBGG$`1*b)ELLinc;bV+J_ z*EpNpxuzPTq3J64n8KOR5j0@mT<;pjP$j?p8e?(1mj5V|-$tK_4&|`=6N+`W>9Nx` z{19%+&kJ02wtN*fnF+RWM`}_0_Uy`&JDq>eL*}8iq6V!ly%QE}d-`sb9jXG@B!{UQ zs$In%-0%iU5Knten!GUvK>h1`g?qys{Yw)p1otOTv*(F4Q;fjU3J7lx1%50^Z}YAf zAn*Xb%uA*MC*qOfczd`Yev_W(u>w7li0lp31NJ?*W;gnK-LJLvM>s~ zpKTR;yMUo0!S159*&A-hEOnF2FdUDdYhsSWLOY+kv~rcx8C~83u#aW)6rB2KRz_BM0Bq+E)<+jN zmCL?5iy}L(6|whxK+3_AQ-bO|ztc`(Xh57pyh)Jt=Mz0~f0RM&h)acK38I_O)r#-K zS(g`4ryvC>n9R9dZzo3WhY?={tY=VFy`N?55dXB{(^5NF^ym>YZ3hT}7<6>=cL7sh z5m7kIz9=bfT&1}c#?}=O&#M7zMoQdn79E%9h!MzQ#iQf5GXse!p&);UiOWb_&cgf2jbRk z(ValS6L#jVG~maf+3%8eNA&iE=~7jk*CiQ8OZbm=Y`eG1$816s%WncY~*WK!RpP;@wjWJ0+S+UdK4h62`vfz zc~Ut>UA-hQv8AoYYOF3L+^k=H3ucV z-t)AwX8r|N8*)c{u-sv`!R|ej5B97=6m(rf%juIQS9_7e+E@&bGla;4b9nhj?M2H# zk4TTf7!~y@v?ir|q&vYIYEER;LoxaKE8Z{W$0p;WLSJJvCs^e-^hF`-M^H(poCRdJ zFa_^xe=7q{I&pXBZfATUkY@i-0KXu$atmj7r;msxAk*}4)3kXHC7_lipDBA&{|68$%I_Z@Lp>vgM?N&9K zT<9_g{Y2|O9~{%4)A=jc_jN&!LmGGacy=LQ@KZ__rPvl0X{jithl)v&(hJP#56q8tIkCKr%z8Yz&PT$4j*b)_|Art1pa z$M)+j)hqcV$9}Bo@D_ns#FhzASr|p>c4>8q8Z;R{Kr$xsth!wK?t206K(Fd4MNdsQ ziSsUcQEsgwd=3zX9Lz=F%594|hyMMbTNG(0vPF?M&o+Fj4|70Yt1Vh+YrJs4vCdX{ zR7%QtS#^cqQX_Jr84;yd32+->n#xQe+PPU)5z@xD;`CPDG^K7U!uY!rGq&%qI#Wa} zog4PmK{Q&a=~LcxyRy6T)1g=wo<*fbjU4MvbPR$3PZ#U6evF{rj| zlK5qwqh)3X0FDVhpf@ ztkH&eknv~N;W6#s=UYZ^;$+_ej(QVJHl>LVJDr30ijwFI?9WUxn(_ie}Ec&6t4P;ur4L=KCRUB z7u}ku>tpC8aD6CUX^G?m>`sQIf*p^>S#y2ivgpL8PN>T}PY>yC&T1@!4$0N?0KOmL zxaYMzpMy*+wqKU9Wn$s&fFpS$M^%*AndA#fu`3Vwh3puR^Z9$1rQCJC8Wd-m4E2jS z5Iyi+q5_05K4R*4djB+C^th=LWZac$CEsb5pZ)8m$a=6phq{wwfvnHCCHXpVkyR4x z?CDq|qC<9lOlR=XyiPjY-8*Bpjw~seF)MrRj~I%Xt)Dz-t%ZyK##s>#cIc-};_oyz zl0!K4FR#%=-3Fvl@p`x$gC2dbx3W~nkK5<}?xXqgyE_?wJ>>KlCKuUIG5kt3HHl(4 zqa;`GK0Y4j^Q>&DZ|rpog-w52vbkbLmUzzFJrhKIf+EH6*3&of8L9yRz`T>$!~Z@_ z`kBN64thv$FbFQ)S%ghyX2@FXF}zmx{vntVO%c8|uctpd%0$rjMpp;ILj{ng;Ql$N$HKmU3D zHbcQuoIis`2mKejD?NB&kZ{N{gov}3GbD1KSBy7%%~w#&7Te;Nh&FJp2v^e_hwSU< z!ImPim2(Tt#-3c-HTd5gdWVs_wyU+NxZ2LsE;=LO1Nb;k=+y{SSfhF_@R#wBpmu!o)S#yt-8|6^2onJ7*0=(u!};Q*Kq_B+fNttK zREMsHIPk7fvQ%dP5k8rwSce%E=WMu)1_RP6e|eY^d~)sOkw&hBvuvFhd%;jN>ydUb zJ2V3%Xgo`9&-I!XJAb0aq>dtP2Hy^QIMAkgX{J!ouam@K^;JxCM!2KT5@&?nT_x>9w^7UiEKu&Gl7DLm)^Z+rb&|8~pw=0-*+3!8z=doYIWeTIMm zQUUUY8}~Y$goudHCaGWVb3gb~`sUd_+cEO=cPs2g1f5edv$P7g5uH`ZvuqU!@vWAD z{A~*j;ClTjji@!@H4TsWpjGF59GOCVn&3n_w}^%JN~Af4rrV#XG1X+v)(Y~OXU`*2 z?!yaA`EmA-{)rTVRn&TE<01vfkCibAK+D5(a&v@aj+d}xXEY4>f<2f>@RshG_6wo6 zca^*ki&MLo7|vojMp1V)2m8bnf``ML@aIe6sww(3$}}ugFOUzpQ%z8uu_vND+V+ z`Zb|cTEC7FrqKdJ^hjuLu+um_^T0U6UAq@o& zi*>0JE9x7@*$mCxXU}VjeEhZW_SC`9->GvnP!z6UpiM9mU%WJ&hq^1qPBDZP8w~D+ zRPBl9tyLFR(|UGH^lL@pmGrBwvG8G3J$SCx`{!lUhtY_VSGM#gMQ&8JqsSJEnoSLC zkpc4|Y{;IU*6yH4%DMX47!H{b7e~F_+OyWu7IMue(KSgIT?%2p!~v5W=M{crp#bZ{ zh1#>UYyUF~t@9&m8^2;;h4sHCvoTAoFXs!uu*4QxX!o)V!3{osxNPe_EKGfLd@h@+ z*a}|-cU_^Lbn7x;AuLPJnB5ZhH%Mn{jFdx`S|16+x)XhUh|T*Kr^^}*!NzZ?<5HovO`%C7X8 zaFk8nY4aR7yp=kzh{02yQ-&`?EBKg@`*eGVJeHj>pj+%ed1*z@){1}5H`epJuxC^% ze6e97#CV5)Ga!NT_Z98JFNRQ_Lj0vP?}onMRM~bWsp5bTgGr$faz|_>8am`A7VjZ> zm;-0&j#zE~e(!XkZX$w@=b4n@vGJ#xj(d||qchAd?#xVo(>dQja?%|T10LQXBu9up z!f1xyPED8{wqdFoLvxf@|J`Q1I~w;ytyLe0i}9n4jj$fH?}J&tL#R_C=EbQ8{0dMG zw5%E)dZ8cPrr?+5*R)zLeLzOGZw@DDL-irhlO`i@@UdUavNVAf= zFk82Jis*}w&VuV=H!8=gp=!VjQHDxwlnq?n&VVnNOiYgXP}vNv5g=inzxwMNx<0&{ z91!Nq?`ITVDbyd0M6lUNpfG<85m8f&sD+C;1tstYEar)tWT75gH1AsMU@SgaOK&^q?;H|l*JT_LXFpFNZWVN9Mll6C zTgD4g*IS>WMXEtFvwiY(Zp$!aXT+i;z z`{wo3iQgeD#vC;LJ;#ZJ`*32FSZ5xbLYN?+eGNXP7U~ooHJ5^>#dnfxlm!BIQg?53sP!ZD1=j z42RWMN+jr-+D%UtLrAIqyn`UZ>okRYGSrbLq#fa0$W_sNw0mI3;s+B}YAwgN8x? zwRB_rO=?-Mdd@knTB!ni+LvaC|Joa$EhGV~O}-KR1Jo#@2)vM!8F)C*G`U!69XV;? zvDhN}uQHo>;&|oozAI@OCMR)pSqoIEEpXOFAm)yM#IP6V*}QioI19&fg(`|5VuqHq)oU*zj<+r%Wp}m#qu_{Z zQ!E@0`=Bt9fa=i>L9kef;@k6zYW17CHM?VbaLuQFk0k0+vdHDSczm)By7tee`Ao7N zc5pH$eq*+Gcvdn)EJ*s7>|+$2^IO3v7%mp@%F%f8C0F5pgbecG1mvyvTYVzt)H_PP#r0V2`~Db8X7ICpYjl&0q<@!uv{i zw*lKqh52c@`sxEfFJ!70YuYcw*x~wUBcxsZ$B?h^Wz$?0f!(XC0~w>o?!YddiHYTP zA4dikIDp|X!SzP|9M_3La2|Cifa6v5*onn~3D+%EjOnnxl>?$BsEHJo9AAlslTWn= zjzppLwY{i)#OBPp_%Tm&kT~8OFE2bLm}aTfO8(ySsIGy%C=?xZ@7cU0Em=af;KSs4 ze9aH-X7(OE8I!MhzTPhlLHnosVk}cssL(DasQDyLqDBg=%c7;B@1T%HH>%aTydw&2 zH!W}W1|fF<5_j$8w5$FEv|>{JD`OT}luL4|ks0-^n@B=`RgQL}<>@s-{`RpA0W#*C z+t+V=6lub#SS1s!M9iBBg+LMluU3~y$=l-wL%4Is1D~-@muQJ<`4=WTdRZ!O_OABV zW8an2%g(%?E4HV96kvRD-$oBC4<>|(euE`lby~!x4K#{N^7p)Hjg6$(mIheo1NaFg zis2WfJ7~TR03TAYIu~>k{g`fkLm3NG4|lNT7j8OtU={{)Pz=vR4-b$WR&jPPIeJ{? zs%~I0tv=1;(G1u{%|4i0Dh2|3-Y7zifW2p|Niy0?Y-H}bW;fLr7))F+XWdTHus$P7a(x!rZd|Aq9@YXKZOY*hxt-saI@o!aC*yNFkMF_!$wQmaV(f*4+AGVuM z*gz&PU$C+C2M^5%jZ9~~73BIYl|w$WY?!3PieSkMjV^}qYzw_Sl|Jw$leps^&YD)) zIYqU{>4>NXdtY#?MzS*U0~Q{WTa%wVCsLVT7y@h!aN{o(G=xC#cO+Rmhm3?$n@Sg* ziJvJT#Rs-C6NBw7GBqF3H#z@45vRm~Z1%9{S)MH6x&dHE28Qn{4d4hH0)sF^Ylnuj zJDJx*&OygV1wSAHpfDGf?~PDn&sW$>5jctZhBzXyB%(S3!ye8`p_zj#z5ir;UQBHY@!`|#l*fQ6p zHmKJn?y-k$-{V(>{KPT;GJ7u)+RWA;aFD~FeVGSg$y$rK{;ZY7?a1&p1E74<$G?Tr zkn|6DBRzmLfjJJ5NMR^n$H~oO%3n58qR$pj8nEvmbU7d zojqj|4ocT=($ZVUz5QM=PPmeUKh_w!<1tEIZR;TT*U*9=hRsGzDS#IncNTVO{J~BX zjA}S{)vGwl3t#48ec*TSp^7=&VJk@cgVEZLK3Gz7`+l(7V()O@z^YRl{Qa19>QsWy z)cH_2|2ZMb0N%4XQPs7dMrPt8yb&zEJ?N>XH5X<2!MA^01?6-Iyh15ge;-zXN(-Dq(+uYPir2&s zR2dMDxsVgx0%|78hq!dP54Wwj2N3$#RWwECdoAetIRIj&(5(t=4QY-tXzXs>rFr*Y zXBYHt4C?Dt&u8PP7!h1;uTnXO@yIiy%;-#u^oK#`h@Dhr_5vRf59l{anZo+7rTpL% zWpyqLV%HG>X_SmQl@FpD@&hqm5;WJ+U%L^~kueo;E+>9e`P<(JYPyhiYuSTPJ@HhI z*8r-;+qJ%DcBj5vyxh7_T38hurGg*$66D&_D_I-8`|V<;sl9=V(=?lRwC<>7(RDD0 zXf)^ZdcGjAbutnJ;|P4Junwc8Q5Y`9huyQqV_Q&Xb=?~Ew;W)tW({4N?Sl40^*8XDz^ffHU@3IYWCFIv+#!vP)p0h>Lvx%DtkYo<^UoJeJAXbP#FhryXZ zgZ%Cct=lG`Wqo`@VW(qqNp^8_-ykkbLK|o~yrX$0TbMr+7p2(IhrZG(NOG=QDjw{N zV*V9Txf9|kf&2A9ya&uw{RM<)L={>*ruJ5+rj!;Uj~}|%{qjLrAxx!1;lLLrCD)rg zu4cQtfw{Yb(d+l#bKr;16#BxnU^kV^}M>;}T>frWKs+Llh_vbRsu3Za9^j zV+*$fXu@8@_(Eliw_=4TZUo*_IS|vzL~x01t>RPP`d9@+lKuS|XT@dqe$?LIl3L~k z9c-`jScbGZv&-qLDnkf74xtMLx-`Z~O`9x$XdGOfYZ+}eDT>Ki1d8ZgL+`ZRfAGs% zw2HiHHeKsL%gp0rE2vpw_g;Uev517Z}c=izmeo-%N{yxmgz3_BgzcpgLIyON>>nRQ5 zm1WznuJ;jeI#lZFAS=kQ$9~omW|h6MO{!?$xObb>tq-yXZMeAtA4mtC3_5ZXG?)|W z;Op^sto~&$C!i4vW#$(Ht;u=W6eB=tB&uY1gCcRV?4@$b#Fkb(k%YgQ+V<>{sFLq< zA@9)n8L+JnWy2^LSZ`ut$^1*9oIlgof5?TGcT_!=H~XOZ^z1MVkn7&Ls4fepNpx6= zwpO}}hKerq+8Hd&|F`^(VzMJ&nsvm8+Sgg;CO<^LzC@Y49I=u*ARjQQKtYo7VQP|EfxGG?z zWg1u$^6R9V@sJop6S*QY3E2!v!$I_NTDqzSK77dWTgDZzM!yI_dbBbXFC>1|xa%2S z^sMUmQj07{hK?Evx!6Vx!jtfVwCY}O{xKv@EOa_X%VGPlpIHibvIPaKezgYoZ}N=M zCW~3pxKO_O0w{?VOY$HpBp@fT$`U7w|D^UU^(|x5Qci5IddZFKPSX=TsV96Jw=A3M#1t%?vRv+@b5BIlHQ5 zYebnl;}L_(z^V>5WW+hx+Mb;5*_BIBsvlh#fYm){v!vqOH4J2QMAPZg$6Cr8qv`k4`RJ^+=x0QK(STqprdhN`cyb zFj<|#`fDgZo?YYuU`UP)Jx~1j<=sSOFnmR`yD1Db4T8!)$O5OY#dW=|lGDk=O*CE! z(rr)zktFNSZT&!sF(GGojvuWl8oPIZslQjw_BAlnR&L+=TCBr%_Hp90W~~a546!tm z_bmRb4wbe-vRi}JDaC$~l_-q~#}bIef}@f@V$Fn-EwMTdqWg2OcUaz z&&0$9uYWqi1&9`KobqM*Mi-zlpU5WaU zpFBM!M)HQ(qyrq2?B-q_LA!vykZ5@_P4I4}DH&};jEUtOYm;HZY;`2&^@SH#^pO%y&N8XC{(qDhG^AAVqx)CE4t#aNql_Nhv_cTPsUh3@`RlH z!hLVD$Qhnw_Pm3PLRqV$GO3LCFdj8qmt2j?nIoxt=loaDu%Ay4F5UQ0IGey(BlB4Z z_GeIbQ#8Ez3@3GzgKC(?l(;UcwVY@Fwl+jY{vJwue+xHOw9f4e? zWqhM*0wK8;XNGQm{}*rB>;`p8WraaW5O$59p2ozgnmk1~DHunEooBLBY=|QGBRn-k%?AzFN0* zFE(o4e)O%pvx3aiUarkR0QXF>Qcz3W7b@Q!svHoMF*^rsBTwg|>v`OE(7+}jKVys& z?-VRkL8~ws1T8Budq7jizPk0C8Nk|rr!&GDP)kmx0f3Vk?iwd5$?!B?cQ%r(gX z@TlT=ij{Dnki;#mye)Myt8V)eK_8yMTqY@JFg(sF5Vz&g^DiNp^SN`}-Sy;#hU>cF zC|Or2=9us3TxohM8vq)kpLFh9i4ARhIvx(|unIG2ZsVSvgih9_)p$`u|C zcP9Q)^2rog0EtpLrIUmP<`6fUVl!g|L+R&jVsE)0nr5K61$eAc%JIyHdSpHdvaPjd z_B>!ZH_Upsf**%BLiotit`GWm1`BDY-A&MomchOw^uc^fS6U24(Y4Q%w~5YzNF+TP ze;N9NnK;|c9*8o^hHv-@G^o&WUim^Ev3fa@r^Q1BgO8&r$)S<)VVg008OV@D%0Q|i z)DGt**s&O20bT>%8Z;6ujcCSO;Z`LIbu(zwyC|$?gM%=ql%b-!_$=_I9%a9~l6Gu< zLFZCV!L12q!F`1K6D^^Bk(i8(vlZ?j>M2f;OzZ07L^*c2UPl|pd0{04ZP~s-7 z0%{Qsir&e5%_0yuzoNiLL*NBvDPolPPN)gxJjBOTQbe5bd%?j(`k+6OL5P1;SPc%# zctzq_@caVa=hhby$S2DnR)P%>KkNl&e)C^EsbidNwE#_PGek8-yc(frt!a(v<|tb1 zmwXQ0N~!&ILP-u~L0Ez+G>J7#+f5C4SdXN9*=P@rS|JZrddj;n$uQ1qPZEo*n7X#( z0kkt07J>VnFUAULIUd<|xkcqMEih7uTofz=aYVm$X^3Gq5O{`)BU;vu_j2+6m4e&fK$Q zr|#se>-TS0gny)D43gv;>~M?og{og;GG8n84tfQg+>&H=6H3SrB^0w&f2i&4InE<{ z>Xz72H*RPcBDbk7WAZ!&DdH~`7&eX`m?mT+HrX|WfVqC%R@=&t`R!Bz0)ymYyG@zZ}&{|Vw zAsd@{n4^Z!CZrTtM6TVNp3S&g5mCKkP>qrjS~r2WM1#>9igd7ikAyZLt}adl?XP#R z5#dC$9N2jUEM)}D=O%THa{%wLj$N=88PWa)czSB_iHd-HcsdZ~`UvmtD)cE0#VVn` zewMw^{!v2I=5=KQ?jQgvCUEe4%5~^b9)ILCWWIT((L7BVVorlH=k`E9m+oH{;KKdomTCYRMGr7tZCB>&O_ODCdH%p}kGL$N?YRyqk%?xIN*XceTt95t~ zVEq^or#%^x^QBk5V|{&XQXGh& zk3n<=2gygiULSJpZXab8{!r^07B)Te>utAajnc=F_Tt+fsu7M`Ggkh^b#WR;W)^9P zJRjuAAojX1`Iyv_S%d!0&zf$U_Zc}HUQ5Gu)FalLxFUXi7rYSolxSNR$&K$UhKN3tUAXo2Us5O8Y zt@eHYyl8~_7h!~nG1~TsEw-$>1ukV{x-Mmj+*XPB_V%D=oRzF9V9_b388lpjRn@+p z+krmN2K3sYJ_s>}B{9L>9GlHikvW5JjPxoaYH=RQj9P{P3*#?75hG2`Xm(Sp2ek6S zz&7-T0Jt#AJo6Rv@3}kqNOWrHHRN1%ted0Dk{n?q>mjlKN;nMfnn-ORtp{cr z{)hY@n*e(+kJbn~#jEjCwiEVPGVKS*2t#G|PE>%yP~aF%p~$!$3)NN^?O??dN&QM) zc_U+6F9{P4b#<7H(EPw|bcIp@$N{sb#h1$^yR0n8YQC zda7bFJ;*Ohn7#^KpFnt0>5`%z3@d)PSdHP1)+|fzW6oMzG@U=uZ63h~ylpk42|cR| zNxcog%1@6hViCQ*WZIgc*r)oa5x&rdfkZG}e`Sw)PY!J5Y7R(AAAA9U@nWl-2V_sO zgHvyfwgVK~W$ouo#VY{UU2I`{_E`)~vg8sOtluBts5Tpf@CWM~u8pY*w*U+niObJY z6+>HgpgiBj0>uf%E2c=kI<=>OdwszSIY=YAMM>Lg`Nu2&!=f z$B%j9JWD)Z zaAxji?*oQ_K9!85)EoPlU#Z)1@h1lS={bqWpcJA@aQrqBiaN4#2^T(Qt3C%}z| z0gYNZL9`_HMvTAOJlzZ6NQfIgH?5CEuoSLF=5%(Zn3NhQdB@nMHsm>_NkQ>Zu9Smg zvEEu*$OWv*#)`4MCDR#AtZifTNJI}|32riS{)GJm-hP?2+D}$D-XdM*=feNlAABz3SxB?B##cwt2?nY8??@&1t2S4Vg13Cd@qt(2RFxEn8-zK$f%`6(>U_QD9BX$7WttTG#gHf2~3p(SQvUTnH=~vHt^yxBIeK3y>*Z4ChLf_jd z;r#dkIG}HU2e)xS{x2Mv(>KOT6zp7dSv19CNe%3OsR1{3yrhHZ?Lx!FDK*Q<&I5f< zzGgs8fd8NxGA*x;LvmJtBapflpXotK;VofVf*`gU)!W=fsZ<>8 zZts6e@V!RxF1rB& zv;HM})$+QItg~G4jkWKTFa`wrga_r)S%jHz40s#znRaMTqq2T2x9q-&9my(m6m{U~ z%5zQUoPFMSl2G_ZV`1q?O_Om-a+lreLtS%dW&EJ2lXTHgyzC5?LbZbTCkpF?WXi*y z6KB6)?>af_q%ISM*N@}N4m=b8UBjV3$6PU&VuZSAYZZ};>}pj&baIOjF(4FvO*GcL zQb;n=RnAF3hvyPtjFQb;Fw!moj<*G?a|zD{K2rzR-X3GB6=fSxwoMC+eg@Whhqtto zQ{rHd_{!bN$?NTOZv|5^v!Q)?V#;-!Iumq)zqV~E4sYEeZR)o?7k`Q#Ve1!`w zb+4*88wn?RbL^_bE5md%5$Lp%r9Q`En6ZRiX7J=~he^@3wQ}2{s)kbyz0j4!&xrJT zV;Dj@3U=l%8<{>=X07Z#8qQT(kg|Z^jIjM7ub{o`SvTVCBPN6O)A??=P}I}l+Kqo_ zvuYSWnbIRk{Z=evmuE}@sH=CO_Y`U+C(+b% z@nOSDTY+3ar-htPOxSNL7)T5F=0m8N2Hv4<0FlPd-Md<1jaf@CMwr4ibP8;XipKEO zq++pM)Q&2WfVgCn2!Hq@N{3+Yyrt>+0RgQQID=frMrw(Z>j8?J{WXq=;QUFt9hKcM zcIZjDT~sb-I-?}g=m{^uLgQ)D8uW*=CS7qd(uHfOm4y+o&INqw(Mg8{Fsw}O5|sG^ zeFlG_{14Hh@LMYkirXsNbm)muoTYFo`$@82+pk6A+KTBBw2f2KaAM$$O3%9bvzb*p ziKp5{G(j#AIQNsURElmbOv$`O_q)ojA(akgt0`3P1505z;2B-rn~nRo!zj-^+AQE$ z@2@q22g8$afNUquPVuy7c`3n1UhoFF)t5w=%p7}_vrs}@s_c^@8v(^5CWlly-$RNS zPEm9-B(`$zY}z2QkP9V#6hC17KAS$)a+cg0S+aPNxx=%eH?Vy}u`UT71S#4BG1}rBEm`d29da_H(m@GR> zr)9)8s9c?j`7hN~d3Nj*m*AaV>)4xO`t5BP$v#vc+C^q)D1}`u{y-n>dH+}{X7IsJ z3{&U?{&>~yh7X!ZiJ`9oN;k7W8vTVqjQ0>(b@O|@fR*!$YzH9lzh?;{bdx^N4Th?| z%rIyBB|G{cBs763dVb5?v33rSkq9xaJpEBgJA&Pda?i_Yp)ko9P+K7(ULY=oJ_$iP zsmh4EWtumKhy~bvyPAKj0W1Y#+_Is?LAT;MPYLa1k1c z`t6k2oQwAcU-5J)fg1U=Tq%DvwM2>ancBv5HOX(Zn4nmx~E8rwx*{Y7hJ zogcdBMC5VEoUqVdR;)xfa7ia91_SWpK34{GIC)s~ql-|*y`#v@w*WY-skXX$bUtKk z@4h{0k5pS3%XzQKaG^PutIxKqpRz!$BIg}5X{{2ao=B|XLvCW4E(9(lnmZ4OwY6VV1w3r`;K7&(kxDHRk)!At6+WC8UQ=~e~tz>y;1t+EQp*>hv}ojNM~b?2{N zT*swfWsFY9tbAeJ5|*}U7zc7_Iq_$%0?WMMV!!M5^5|Bpx%5-v;eU(0Hm-qg1yIO_ z&l(0{P>VZ8g;+vnF)1xx-7YBu`5XV~;s43ZgLOz=%}l!{#T5(|WIV6meyR?sn0=Z| z1lDUk;18y}`+1bH_nDb^sBRf>0_)Sau8e#lAEA(aM*VlVQ&uG%$@rh6LYTS4jteZs z5tC81Ggv6U7n*n|Kmcn=@Mpva@LH zO(-RG9O{sd$1iftV?xCzj1`)t60eEwz>=)`ruH-0!ufD45H%sr}(nDoE z>Ih~ap|?Uf(3CFK>NF~2&vAP%;>J4anlG)D1)=<-s`@I> z^6k{;PQ>wA?N>olOl~HAo4hByqq&dUXZ_{}EpBYAD&(0fo8H83UO3)Jph zFutB@QC&Z{&uP|G-mmphcPim*@K|@{YQv#${M<;3T0obV5@Z(3TUTf{B{7ae;lg=j%)fKKZ0+7jS(9Vq}l*Yc1XrXt&~w?F3x ziTL=1bn5_R{|WFY2ANU8w>f3MTQ*d#yU;5}s||=EME99oLE^4TVIZI*Ea$wAQvQmd zC~3>JG(1`~FFQ$#`u=^-yK*uJ#ZF*U#lo1JQ^zFS%3}^`MXLy~$Bz3>BkTRkt@{O8 z{MNcJS3gGZhU4;SZaf<$ebX22_2Rt5Ufu3cf&78AVPc8 z0Dbq(o5U*#uNMT2LB78PV+xW@KvVf4TG`5vm_~T1Am_Y$u)b;+ayI;wuO5<7&2`*2 zzF@53pH>+>QF~dH{$r^bh!?GZ8%PlDRdk}<25w#3$7CKZWgnmkO0m0MgQiXPf70`i=f9)P4aLOzu_2Xyx`(GwCBNs zweBwlP0g6ab!&2^&CVi|JDg7ZJ9-9#IAiVgV_?b{ezhIf>yv>38qUb=$0dHop4*y8;D zo1(%z@kkLU-EK%$+P`5<_eUe3LMIm-xZ>#QWAfNftM5sN_O_tT`WtsiQd8*!< z?*%;Dqz}~gN8F%{B!Ds%Qo9HH1F_{9_(5%N0z_qC;#mJOP`EfI4Xdokk~9e09pUb! zGJHbx9)!O*JEW1p(MCG8n{|CSp45ABDZV{)kh(~uQAt)Q<9Bo7_)|ZRP1j#wwUHUz zfK3>`o26}An+?P04tDGIpbTaT8(Ue{+0|)y5|)htSMXDpKtV1266%;2LPxX^v96(>V(RMO+b&j#3tZIw1NsYeWD!wD@4wR5#K=svpA z)VC5!hBeS2G-@NwcMafE?2jn7_PmTV9_45*5AMQ3un}~K^Y&*>Ql&hNL3~EZlRv3u z#FjJ0CO;WIIC#(W88#>G*>JaPNEw996`scpl)TM&XB8wrm=pmMIfN0`5%-$QPXHMi z)d1mYmo{cr$M1-M>pxJ%Vh1eiN)|}TIsK{uOqw6i;=(4qkdws|Fq1X%D)EvJ5Du-c z=R&&!nVZ9kVOBBk1%5VV*f2(u)pon6X($8m{=NYWWJ|--`>jX5xrlK{kflhycy_DN zsJ>)?`8iG%;NZ$9pB)X3lH6KJ$Q@t(8UmC8s4Mvo|7zN5fNBMs75BlvF|X411s7V? zy@XiIs2R(VtWGD{K;W57ZI#a1{xh?Lbiz52hB&4?U0j`tcuL+?E`AYqPb6t+E3|eD z`=lT)4EQPT6q#A=H+mAbc-OS=E?jg}Xz*nKIqbfnDfE#cKc968m zVe+B<{QRS!P+MgYWw0xfN`X$qgsVEdtn1TI(H}~RGqK@n*hQ{=kA}Dh! zfHFO8N?9#+&b= zi!J=CQeSHFfzDgX*jPvRi~!++4;zEutkG3wjs!M`7UJj z1r)qA3e}Pcf9x^gBYFntePx5l*@2c$@K&?E1s{VqmE9fWO+XBumPxs>1VCN!F%%I( zn*&AfV`&BXh=NSY!}|fj(?ES9%4L?4Uqxh%!@(5lG&%#bKQfPZli-boeLY{7U9M5S z>n2_85^Tr#SvREM_9Xst5aXso(Z5*p-|BxHQNniQ@-5Ze&b~xMSr(FQlal!C58FAp zetO9?;>R1}op1kNoLJWXPbXGXN=i#so?6Ay#?(p9)J@6G#?V$lSytsgVcGvAVrkjg z2xyu9Ly2W(BVcFzFC~`kzkt|(H~(iK_TQ8LlMu`B&zP09baJw^HCMMZakd~}|8GJp z+kY2gS^m9|(*GgE{>SzImT>=HLM$sQ1KWQIvCJ&&tW5tU#O^dbj!Yam44lpPNbNz8h8}yKTe#dN`95go@%7GhTXv^kSz8Q zYzU4UzgIK$E2M;eQ`9LpQ%Y- z0IoZaJy8={V#>olIfykWBulS*-o(PB^hrPhp6_|AR^5U1IEGuy{Yt?bSb)Bk=&_z# zqU#8Mqv-yFuCFACwkMR2HlZ;YW5+wPTcn+PpV+$1z}Q#^qN)$oLQ2g{@a0g=_l!ab zzvA3(h0?qrfN6z|l2Eo!{X|55uN{BD8Ma~J%39Hr7=D*}kI&iG_z`*)T){%168QQ#v;%jY z?~4w~G=B;Nv@9Y4{=J)k<#Y;N$YVq+uLrwM(U=;=WH*495lIxBQ+8we5ZV(O9m1f+ zyhPw}EhV#W0&I#CgB3qrU|PM4n}4~1&<_j7`fP+bm4l)WOVhUML9UPv>xew5+|#xW z$u3leH^@X1U(iR+-f;8^0d8DC1z3SkTO-VJFjkmott&}1y))Ui=2q7^^I9!<*w z1lt~7n!3`K0f^le-!^>{xWz+&67q+(BgLRs)dEihK}i~*S)T{CinY3|;cia`hOW9= z&uWJaC(M&c;dpJ47A1YCtU_WialLzu7YsFO$_Cd_>>D8j!V9@9KN5C6!5GR35)v6m zOm(lZi}sMv&Kj1dV|3L=q`>9s7frsBJX+?yB!oGX<67u~a{v|XeFDS;_+`plsDd0W z1P7uF4?oG(jqSA0SI@F`WONti>b2Lo)`Vg2dzA2vU_3c#$&`<#j{8)pZkLaw(ceUIUeG9f9Kq97GP%$O{W!c*h}S`S*ZmyTsRnUZ?BE?WSX}PVphx#26Y@|uHjlmUMysHPT#e{TXJ*=J6NeCk8;^5 zs2!+4U0?b)uM)46qRz+Bu6)68g-o8vXTdIc`#ZRPvbaT=Z+0*cE~A_RD|~@-O9=MU zg+q2lW|v8Os=uok>5nmx)9sJ{nzb$P6hRf((Tav?ToYL6PMaCNT~_p^p}jMkaJkiE zMP_A)R6}T@SWY91f|41D5TcfGVj*gYsDwIr24uUH_l6!hinq|B%X#_r&!c2o?-%0J zN_L!b;$yA3HvytbLg^e;M%mRVMkK*(!}7NE7MRBw&8I}tcJgZQyH|t@A#Y$^jk9A$ z(K=CbBmXPl6FFt!D;|3qsKyV7w?Rv%-XzJ^^wD!U(yi6`&^f)YBsUuDbuWEm<4R!> zN@CLIj7~Z%$r=E4wj+4Ao3B$sGV!0oqWqq|_GO=4lrJ$&{75pd!TSu>7rDPc=5bQd z7M72uBCJ=seMIp>KIw+I9sR*|7j|_s70A*Qh0#TtA_`YX>(GA_ZBia6#`vd6v0sy3 z4rXoNU#vY9h_4Jqk?YrU_6Qlpn2A{M2pme6t>^qZTzTNHY!3WcONPmM^2Y$Vho+rx z_0v`xCGRA8}WilfAej9+GrfQ5af{r1@8`8XUm=YY7vR9X-!nU{P`CCqbjfyU9i$4lM2y$hxsq z0K%bWs}`{t!xhXziS~5X<&8R#JPX1eP%w4i+e8KviXMwBj@rPzD_t6W%I%3Co#o2= zkvSZpkaYsW=t_0UsR#h&bV&@n^g{{AR{{W-W!w>h>Z`iYJ+ah@jL|DUig*Kng}6V{ zk0VNav|thPkIJtV`i^6QGXg_)@(T6fvR->1Q5mBtIcY(T{n!3X2^dGT0}9vtR(y4$ zTa3d|w3{avIbnS%q?6#FEUisj>Aq@WUHm;&!ovGx<|x^JAp&N8h(mI@)(aXn*uKf5 zcBr$DmhoFr(F$d}(Pj6L{ceJ-irYEHgR$y3<|awCC7+r~mp(t~07;}Vf!GEj0*n12aVf?9`xRZ zZAwY(Af?M-!B?YMxIX3NkUB_iU6wFjLe`7!tsNOyoGaAd=Z@T29^EDB$79!Kt8f>C(AgHMmhDC|a+T=8%EO053wr z1-x37Bge;7yz1fR5rQp?WqI&gB{=pVM;jfKio-PF1Y25L*y=-~JgX^n{v=(gJ^D$= z2)by6nd}$70k{w|cet2W)>mXRMbW-0Qlk>-nQI0DQZiZ>hc>xwXCx!lcsD7M;jO`J zjD@gmPV3qlInG-Zx+9pQjW05{71^?OPTuCqfOdUr&oyu|#Egz@FvVUJ=&0s>p#j|G zpkh^xkfKuw-_caU0oh19J;KvnUgzjU+qoJDFwdz9i0^7Cc;9E>JlHqVa6nU$F4oto zSwb`yc3(1{g`t>gyOSPtWOq>)&u){OzbbdKt!5Ihz=W;_ zmVKaBN#xt_ZK&7V@6=noiv-ER*;GRbaUlU~g-W_DmJrH1f~F3lTvnLufPUFUD^0YY zENQj;A}k(-%v%-!iJQ=}f;vxI*jlPg1D}cd^{m*ptO1sf@Mqc}fi-c1I2;Aw6I?tT zw7dZKhBvd28&ka)k3X>`I|TGv$&Kkm^C@BG=c~*$be9ZIDDPz{driE^zCh)JfxNkU z0l8vvk#G!DkN5noJYdOe|Pl^(IJuxau ziZ^rF`$ggpEbW`*Hd*=y+fFF0nlU7U4`)GEP^nohAg(B<-vJsgkmoGB-?pt(SVFJD zrWtMj%{{f0qEJzSx-x8fpQ*uM=`3qfw9e?}Zl1>4X)`LDe@E3ZD*5Kt(dz8e!ully z7kw=7Br)!|XZbC>`#0$`yPo4xR)=vD=U5qh)TRPZ5_!eO*~A3S;Ny>!W-3Ldfv(^) zL4s(;DU8PfWXNp)@;bYlsP6lXcBMs%=dF32<9MIu$iJHzn!(p&o(be-so*X4kYO+3 z@-^R}bvt%QlxsG;E>KJ~K`o7j!`80@TN3A;x#Ou(afwhpGsVkf0@1}=Hh&YYiqpc# zUj);eBJvK8{mD(9{NKw)^x!u32h>~fk=xD9Sh=ozEXfCUeWwOYT`^~!Zjh~v0TtXl z`0LIu>>HKJP9`rSW6o6NhWgDPU?cmIb=Kl<81@_Wii*7WV>StXg zI0D17+Q4U*g)~F(8KsKfJhAQb62`C;9qVqz!AFNaiy^g~G%2pPZ4^8NLIoGPnJ8>_^=!9T11|b{3)(@YY%&`l3KXUPzzklzS znuq|ln>)!35)znWP;;SsoA;~P0s_tL!xeNU$OC(kKf?+DxWfg<{(1$N`2+c$FHCj^ zESz>0jpi^%)SqX#%wAdy^6^&6q`FQ8jU&)#3HW{#oq<8zk+^guawrGq#z{FwYw-tm zrXSN{ecq%$N*>q5yv$w&;40N4HiRy}2t>N*ag0Xu0zAlIh7+D2yjzP`X~r}3-_7#y z7d9aKM1uojP_TdtZDCh5B>Kh5X0BcW^~!J3mZo10jT>>!L0y6YDBT`8{C$MkCG{a4 z|JoUCe&U5;fJwhGZL|c%$7V5t9*cL#-?lYl$rJNH-38TYBPgy!EqV5YOEng*MZ3ix zT4HVmHIY6!e639ROcw8A%1V2bvcDPqgLSeNEe6{A+~XSBskzvKN{@gr{kMaoVmV8S z;|ff-2}T*h1|v@!EAsPm&&CBw7+{{8Q3>w-hJpjEy_X0 z7;Yjywvw-TaYjA64J_9)?sHGUYf*@2t}7hp+nCqS?TAHDGk5R|s;JRf*kIL_g>2aw z&z7gHs@M_U_V*Y~aYs7xfHnhIicZF#`z+W!v~mxfm>#5JS-^fBKkQowGn8l|T={b+ z+eMeTop%BcX46h?%O@Qr@Hl&b<6PYFY#ip-SnWyf>wzTp32&$Y?yIdeUan2=szff- z_quSpurw!ab6)Cb#IfJAC;+*CPJh>WaF=LxfCu zGk9eJzd|fGsw89i$4uA&;<*ic$A~|B(vbSfK8t(l_^3HCdws`X7 z!_UJOhxMFPYXQm8Z_$XY-Vxm+goejFF_pqI(|=SI2D&jtY5{wXh^o%f1HP;9kiwUe z`aC72e^CV0oXRK+*5O(LXVs}O7H@j>s(c*!o+WO^Mn0Ie`t-(=aJQ_2(&?V~X(%aV z*CImCTX>ND>qI1GyeTk!QjWG`5zC8RG!oHdn zoqOj=;|xfWnuItyjAU|{^E5WVps?~2*B^`FNn0matA|Dv5Yo3dZ$#F%{`kAN_>+3J z_z934!xh}g<~tQ>qlCVDGPA15T<&Lf3cYZ%*OgJu#mXfh=rjH*HxW^oi~&YD0m>R) zT^(|zm80<|%g$?79Xmp-iP%HfOT=F;grlD)*sWV|b>~|Op>FMRr?~)FG#OR5-@9fB zf3y2)PK1(&n3*Y%PIj2r7CDqDde$CjndQ(rTsx!4ndqI!$^JCRARkJu;!)_Gnx9^ZKtatThFqa#Y|>fu4KAfsyVaf;>~T) z4Ls#=ylp+ZWqvuul`5L6l56n86OQ-Opiboa}S zWrBA1voV}Y#PXJ6KZ2<=-~mkLu~d@N?dQ3&{}nERQ$(>qU~*@lY|yH>6j|%gKS!=w z_}|{D^x$NmHiQ$qohomX_!YaoBZ*e%2Gr<2h(9fMa?pFIG~n`bGCGMRW&V>tXyZrp z+Y0lV;L0HUwFm;LN^>EC$e-r?7fM}5&FNXT$dCplbqHA1pQ$vY`Fhwa9BF*{&D@iwueJZy3qu(7fLk}f`fT!E<`eWkA-&RJ@{)(GNF z(tbLDlf0-q=lfk0Q69VQMf9k2%4=OzB?#!m@J{Yfne>B zt-T8$b{7mI5@4sfk5|Jh+u?Mt&r99elG;|%z=ld}C>vY!OaTxJ4ZyxtXnL365w2_; zdY{nC!7MeBu@ZJe!fXVY7sBMk`$LAv5? z13|7Fdbc;vlGFJ44Dq{3;yI(HUMYFlzi)R+vVQb!H5x8qd?BnhEVAdC6jtD&E`W`a_PYn&JK5cI%TXM}8hU-ot>XgDhfV^;D= z(d5yI!&m%U-q1%gI6ekSNAs^y&OMedppN;51)_~?A-tna_eA1tg!Njh*l&alSYTJq zPy9Ealk~1BrI0RGPsLcwps?bz!T|HUKmR*7-_E8r$R-TOFjyx7Q7rXvSM9Wl#I(Uw zjP(ffP_+oHC$aCIvx)a72yOne0APH?e?Ta5ORhji!Tn!Iz6TR?gfSph&{0iK7k^lG zeDa_yxPb-(tCM&IBTU*aw;ld?R!0CaHwA;NY$nY3mo#|Vj?32~tcNxKF2Y9+`Ap9|9B~PU z`to18p3)DgGnG9PJW<}XJ& zLv#v%4LZiIJR>2n;qK$T^$Wxz?94yij5?cp$@t?u<3ctT`l%<_7$;+U&@BCVE8m7Q zVT3Y)lI#Ja2dC6i$1%OOJ=cjf%dEPzo_bx3ZZn1wMSW!y=gTo%4u0LFSg;-zHXR_9 znqf1g%aR|Spic)ZNDF)N*xvaOl)59Y*btfpqTl_L-2n2nPh#)^Z zts&kVSiXi}70-XgGKxUouYvA4jRa|%?f-Wi!wpRb%jRH!1t{Dy3|KfWi$><^LEHM_Q+N$cr0DpXooHn zx+l*bBT9^gB?)mjm(%_9n5s$sU?ZIS(hXmkeI?^2gE`iI@Dpq3YJ8&GANwhamVieKVhXy51`X_4oejK;(cw)f|jw&+Nn|7woRnaox38 zT2HKw%|+9F6)_7%CpH%PD>5r*5_DZ2fIn=+?H6*KkYBwgblaE}8`siohY8d`uZSFP8_CO}(Mqmv-kMd#7w6uutSHg>#Wq>yKHxDZ5-6n# zi^1TBzm%M%S?C09jqT8g)M=W0G)Zm}+hQNfN}AqWzEHmsVB0^%1?do0YL~-aU_Dv{ z^oHH(*lI+&FsiQj(kj->gK_TmkCRp6Wkr6U>a69~2qiWfxt92j!kKslg_=na>@7c{ z7729xZbqs^d?kOXg*2d@1U6&FLIxP!{B&J&C&w0E;w3CW7*dYk?JT)RT&Ul?PFBc& zJ4*2VlRC-q&@&KNx%>|4V+z5j0!$x|gpER{eaNr%k?e)Jf&~5S6ht8wON;jfN*A>VS1aQWtvb~}a5IbO z{Ac@X6|#E)56~JYm(Go);MWV2GM4I_oB?vWxK!HiuX1}g{Ql7~5eg1FLIx4piSzsZ zSeaWg#VpHb=Yxw-av5rw;lh-!t;RbXgA(sDjS2dS0TRNv3PIuZ6-=2PWIO#_)FhVR z`wAG2Ktsx$b$$?YC+SNU5|#>uN>3QK30 z%Oj=~gQ@&B@^{O=yE55&s3*jre8`kKk`-;q`6i&*35 zzFx`pM^v2~=LY5Y;~4@1Ho}x=byyC#2ehI)tP}{7KMn9YIyjOCbmPB`8I;B0Ss|T;^6S4`_C$r94aC_xJ) zd2445CXJG}O#M6vP~S&W*9?^#ESDxCj2M0SWO^|UkjdhMHU=7G;fwS;rR_09JaiT1l_BeISouzs25U0=hnez(e zIs+}{?cSt67^)|Mlz3*KHL?#qbbFU3)o`^Q{Y-}fZGtkvQ1QTqF@*p7t6chci#w5* zT9gQOCWV!?v!mF2f1g7GTl{t?1a?(GTe1gMX-VmpZDf{>*o?@)5-!eU!8aL1^#`aD zAbuv+z(}f{OF^Z|xn2@n^zc)heP|dG@t#bj_HtohgO>-0bDHJf3JX0c0ms$a&7UWt`$6Ye zb|^NUo|!95NuHecAO**?W_n@eNUI1>23K{VPeBCoOhh44?{`c6g@Pj)(;$ObtH@Z{ z&My6(pPa7pj9R_ggf(ufXd&+5a@QNQiq9pnSp*?xxLnH(#yxbT?obsoCR}BjwD++E z_89;hez4S(?Q2SX?@jHINJh+J-3rBxInXUJ;y;rQwJx2Mo`1q_44lr0z7nBCN=G1W zx9!sV^7AB#PfpS^SvU)9mpzI_0EsSYDzJ5TBdAgF}B4ba%u459$Y z3y|{MoFATgLXk<%eh4@rh;chAq$}2n#T83n!mOJ7P$qdDf!^#OGHv9&BIBt9&w=y5 zgZTM?=PfN{KH<{i$wQX96x!plesn)SX_2%u3Y5$;^R^@=-qL@nj1FO*H6|>Pmi|oq zEl%exGv~$F1*%f%XCwAg`x=TXPt7CHjwsHbQ$lj0tIRHIS1pIPu8!o%*e?QIRI?LN z%;S)uY0L=tnZ2sKW>1E4sX&i{Nv>UU-3SJ$UL0BY1mw$jVML1x?cPIhaA`7)3>aF< zyS^1T`?P=&Jk7%_mKRDN_;8w+CN#FP>&3| z1mT6r-Q0GrdjT9-*XWw|3LBW}8-9YlHLE@&jmCD?A~LTp8Zi0hwcD}swKMOC{w;!A z*FkAwxv`U~=)C7UuL6++QJgov)@MYos?eZT4t5wbDI5%X_xl_1a#O?OuYu06(ZIbH z9od@9lQMIxA|-nvTW!rJhDS95ou>i0lGh?pc83rNr9iEG zg;*LlAso@ zB?)9O+lurokV`|hQ}=aBrB>U!&U@a@6 zH8gNi@k@HZVKJR&f;ZzH%42Bx^{Dzew%XG8hDRt7NmpXP3!~uam%wMmg{O(V0m1S1h+q2qiMOFy-fl6H z!x_jiJ?Ww7fR*)YTpZ)5c&yL_*PP}<{`E`K*>s+p9v9CklP+nDTrhpkrT?SD`5be{}eTyaQ&$01V5a2F*1FA z>wejBqo~{Ia6S*sc4-&n`;ZW*;@irnZYz?7Y1-7A1$eVC9Zngzzi?ye;m_!q5dIr+ z6&W`5xrAiXCK{V&Cq;SvS(9s+mQd8jWxW;8(d^`kjp5Dnx>ou(RwAj@(rR@Ri+1Hx zCS_Tio&RM=pm{(~_`8!rN}kbmqz>nh4+T47|9F5o%7qHuFdlp43r&3(Q#~wk;x|Ob zko@*?+dR-j8f->|TaFm^-AB0;{;>P0-i`@4G&YG5DH8j-`}*f8}pf_qUbuFbKAEk5{QE`{VoSjuw} zV(LtZZ@&nqK|FkJ#S8Y>tqFgTpqI5V0e@Q&;(HXl&el&_IaOi%p*Z}MYMrQ_Zg{f+ zZ*j7DP2@J}Y-%18nmwZodhXIiZf#8AGBCzYgRhp9(r@-(Qwh`hWPqpN`HZyVD~SnA zIOVc)Z|v2kd45lte1ZP`l&Ig8x%D~Jlim_<`sB>>!QTG`Pe8E096vt(P&R-l@zZ>f zX|kDQAmgPAf=s@_MXOh7_4S;qYr}#buG)x0r?T43{8uN>^wrsf{S`QORCZsWv~XB` zFft~3XpdC=;w)QPlp0SMMSY9bR zGpSn=!v+L08`%7F?yTqp2GKX~x^w-8>r`8>6pal&j`4E5e_R--qW%$cTEDw^7vIte zUZ>X8)bh&RMVoq9o&yn5R=TnYIzNTyp*#+DhY?@?c6qKa8$J0>FlX-y!_5$nrR*Bz zA9W$s3drRcwaItqxG}2|?%=pY_+)A-UCR%jB1qAB2Ho>GbHB__b^$qJ-QPv?gAgrQ zDXcPPrh`|6ejxg`wmc;)X=|f{m7(djoWz;6R)q5S-F?G!?rJV>th|~~x9k@Jfr0~* zNG0{G zgFq{p$N9KCf?+S6HM!2)yvO-e*J~F<45VUZ0BX_JcNQDa;|h`Fr7}JnfM)XEjCMJ_n_|FIh9TR`N!2pPvk#hg%j?gV;Tc&K-qu>(v>rIVCI>%T0FY zhq%OJS$$^7w8E=M5dT>Vbb5lTua0MG#uK;AGYcvuD&f$Di4t*dizY*2$1^B)1j}Hf zlu)QaHy?Ga4Wq-N13;U$H9WP7e#XQ(1~~6 zlaWpnaGFhJ0ElN1YJZgb<`hH+TvA?r)wEgDEP~eoYclx5NiaCRe@#RP)2HV-J7*x2 zMB0gNA`*%U@c=GOUa8Q|q+Nh1@PRQJrBt<6!S zKw%D;a>|Y=#R5ibI-Y2wwJQ){gQ!vG-I*-<yj~M1Q z703#={2C#>RbrLW4;lWw!_GeR!FpW1uWpu?)w1$@I(ze6LY6EX7I2c#J;J{OAAQ*1 zzK$#SvhnR0$Yoc24GnlKvF<~sy+pdU%NE`s|Im}PJg`h^*aJG?QHRYT3w|+~uim}JJM}qjs=K}e=nTtIV0ifqS-UHWI8A{zn&>w)+aQvB z_+0RWo_?Ro3HBOVqNzSk6&2&dRwP3nKSXkc6@M^UA?? zagta8hmg!$TOFu;n-kim3qe?h$I2~j)cH8ek68AX(#cXd zl_7slO%!X^TWs=Eb82u4OMS^c&@xf@)-XNsD9B`jvDs2=({V|Ri+>wTgc0~zg$0Nf zCYul7^6O&Y4z->`sM|qpYM(JQ1g{qn!GUrkSRiA08${RyX50U?F^{`$M8XKb`--ft z@nR)=NBb5qRY?;UA4k6w>8_-2c*ULIN(+Kd>Rh{?a6YU&V{s_QgM4Ynn_=ylM_6)G zm*J}d0@fSHH*ww|KI=Lqg<*(5gz3P}Pfv0*^OK8cIyxZFpH}`D1%S>Mx`92e`Ar^Q z2}T_48Fb*pYV%z(W@0Wi-MG~>IFO|OZb^<1+=Y6A@{D0HhNPsw33c1{Y-^i@^gje$ zD$z3SRD7}*&hLLG7qGuF3Vgyh*Wrbf(^^%|8zmRgPj{2@s$*{L_;qN4s_ZR%k1Zfi7JckM z-#K$B>cq93^#dxBvE_e25g#72KeaHT9K$kw_v9T_2B@tu9c)~@cVC!M zu&aKgVlKGxwP_J>2lcXR-Nz~vzlk+2ddPh9`EH_cVi~2aZ1CA2H${Qe{vLeYM3DOO zPZnt(bDHhAn~DBUc}eFSE=2957|F0YP(iUNJ9Cto(H_GrjWO>e2GxdqoOapcy!Ged zxQP~7XK9ByE2K_e6VShOXCv;hWe0owVRq(oKRl0@4nG|-Uw5uy_G9Wu!tJ`s@FKbh zFxW+{QF?3|WCv8p+Y30Ud5YOTq?ItxAXNgts2tBOXmJTbM;z~I>~8Et9n<1rqQai` z2F=rFAvLirG2Zb%R89PX{M@Df#md$Fq_z}behihN+8Ab>c4QrKl9ky)c&B2ay)zjz z{%fKp*finIAEOKY(!M`a41WrvN0Djafkm@6WAgut?pM@JcyBwo_L|_Xu=dC%B}33Z^3t2HVdD$V z$0(Pl)e;5NRWUOZ(~`|8O-SVYVP+-bpwFa+8TWwRu|VPQ-j8p2RxPDL8m@!(IkYvHH28R$F(VP+11eXG~3?h2@fNseekrlAjNL`kip(Bdp z*zwJB#?Wz>Sr7$lriWsy)3dPJnF}8zc`BO;RFwMtX3aI07Ib z5ih<7BWT;RJveN%QG=V*}mkbHb*DMW4gFyQBwJt zUajy7<2Q9B=Q?wO?5qb`rVvY6bA-?=la&^=Y!4(1%rQ*}42oN976(}acPbi9y?R%s zC@4{y9>R~J1w5*R0jYlGog;hCY$dJmAcmuA8M(qB||DUhQ~l~7{A zb_|rLvA8n$`e|&MPT%bMVXraP&YJ$lb0?K+7x)VkB`g~$b7<$dkTk;$_nl-7=!}( zwL55l?!ZQJs1qTo>nIlV@+CX)h3NL~KK&filhB%fR-~NBZdJ>>>g}u#ALI8i7h_&Z z??+z~2Bj3$t=I}q{;|qD-j|*|#4SR?Ep0d2E4XK&Q1P%Sdypb$oVLy%RMk?3h3!~p zSJTW#$|9^*wH7vnzRe^rM4q`*FpJCQ8^l06FG;bi5$ts0THNazU{i^5j*xaFQl#{C zOgQqxGf7)o%+&1`Y2fh|i<%wA{zahB+ds`#OQH*ctO3DXzmy zNpiSIKM#W*TX}iYg1H;TB$kY0iv~x{DAe+b#+r|p;R|=Jkyr+^0VVAHT+hcmJezP zeRgfZXyZ!+@kn_>+uR1 zUu7}`Cq?*a4%ahqkzIy`3+^nMhD*X}dO|3SfsV9UJDC26tXwlO)X;%YL@Nepal3?( z{Ny0!vgk(hH9ncAsSB`7kQ1oXaHom9vgBb)8RIfvgZuj$XWG2cAR^1GAqbY`8A?4G z$_6v`5z;&Jq$s^l#2=y|LnrN)ZY^DR*;^Bejzs03H5d}Ry--qHctp-3v!;Ot0qIBsxp-_kum~gVwc6p& z0-d^1CU-=Ap{%>#94ww%AfK1IT9u@AFq%iUuPsUmP;qEY*5)hXG0v zTRGKB=HtS<+Qy2#_mnN+9w?$(9;odv$i0VB<>q8=s!hI><%yw zy0O)C6_!D8s&+OiSlp?UIVT7kq4j2ZfBSOpbHeD!&C)@)s(dsw`=L1mB>6t{Wf|fA=eb_HfP?-?7k0 zycesl=*l=Jj?^h2>~kx?Yi2gZ+uyhis%RY6(sa6e=WV#PL^2#PLYUz(8PoDJ)LI{W zghbyNS6MP@ltoFUTj6L;lk0bGDv1X>-X;kx&@^ieEe;TLR9PlFA`Ds*(>5Edwu9fz zBJV}31GM3o7k0r&78!pFlB1=>&^to|CO7daVyPvs)KBvoig>ogbx%_nNr5q|lRMJ@hM&5mFamyo+@S#l zlh^E-GsJbQn=zC}^6+))!(Lg9bG1Pt_v6)AHJ8W#D;PADFND;NQ9x9ilsXuwf>PEb zyL9~D)%=-5QP-%=E}=>nCGfx1>UOiiy<`BrA3A zVyYol%QBM!bYAETY#D;t^E{Xu%PC8c99~zj33kt7FA{SAhV?HACef6gD721JOwX7< z=~QBt#VMs~;C&CW9EiY$c-*SziOz@j!BGkq?vC-kYlV5*d1Q?bM~=>p>9m;R3FUao zxFniiIEet_o6jz40f`;misA15*U&=AVH2-K3Uv6{Xh<2A<}Io^yAz-O0__dY=wp;Q z2woTJQpG+St~fCPx6EYc>|sCpOzQU4Zr%D2!1z@p#a(7wEHk;lc(;Z~!?eX=6Qiq} znPyam*6}E}8nFxB$w5XtJl2{$Q;Te^>|{_0zF&Ewd_P|QO|bqse?WPc40;=TGIOIV zJQn8QQ!=l#KhOSBRI|SxI7ZzN_*;MwPKmI~n1zn=!<=G5_Yc**#1@}J*&in<)*>ZM zZKC?KY!I0xcm^KRGH8@TwLyg_(Ej;wNqh_ZY`{?m;XLZVzB;_R*WiB9;>lzMieV7f z+CgrP{+Xz2>H+{RI6mHcPd<9&OL*(t-4*Ih7L7I9Ocqr$Iq*SYU%vi?`IpSgtUREH z6RCZXcXdEtJGESkqgV?S-qgKZSpcdzGv}nA2+}5-7DtI=# z6LtjtHQagJwP|hi2>FqFrpfB++syV;ju5iAI%Pid$azI(z!e@2AcV$HvX0DeA~I8% z(#9hXBF7pbd@2L%t%1|klG}Tfp>Q{f=3A1^SZ?JGXynw^%1ZK={isNwOG?AD4Jnhx zFA19j1psau*3G>V?r7u*G`@nsNprRT`2rv_czibI%X3^d=Zm5zFyR`=!Ugs!yzK5y z$S{_)S#xa}k2-IUg;B0l4u~rkLjLtj6lPZ<4enzgUPes*mOM9qMMg@y8`_u~vl=+U zwIu!0iHvgh{ym*O+n`|}C`Ib+ZWSD<_<&EgnJ1Uby`*3HGE3u)_4|sM>{85Jf8gea z&Tc!*h5R;?GN|%XkkZe`R_6FxY7Z`iT5c%Z`q{EPNsBQ%r_{*#4tBJ(YIvBj8X1I* zfZtXqA&Bhv0_JE69Y$jlikxDsl3Jc>4}zCQas?uT93)G3RI z!q|^X>)k7rCGB9dLoSi^tzLLTLtD96>nE?Z27$T&?zALNNhUAtXHyFtY`D9++^`=& zT!6wu-Rse_c$;h17(FVPlo1DC_lhT*1AvwR9psSIR$rfG-)sGaG~zea@`WUn8h zlHppiTR%w5o1%nwpEK;!cZt~LlF2e`jU9fmO{f)$)_H`Qse|@jD^NO%jYr7%l%olm z%i)dbb|A(WcwB{AAcNKXwsH}WAiCGo(DDcl{ulp@^CJMRI6GH}v1!bCqUb9nKMe=+ z6o0`@*9w4735ep~6eJ-Yl1?j<#z5iRaP<3doktxo#!0Oz3T)oFf#=i7UR`Zy{0Z`2 zZbVGTmmt@CR~_OT-3+PxtLGD7d^Ad@=1>?i!cTu^F>BccSj1ngXPh zegF>a=Hq4e?F6ckJr>~O!PnkLW`%q$KaQ|6~i{Nu~s|8kF_T^djr7QMW48+7gt!M zx?EZ%obOg}h@SVTfz^(<+aF^0wh4J|k-p4neZ1UYf}m#C_pW49@L@e1A<~DAM$EzI z7Uf2!cR;51M}c3jERK$g;n#xNgOQ>!_=evz^!dmFJilY?@9U#d+XTiOO#DqNfS;Li6<1yQ_B&LF z0pA~hu2s7fj<83Q$k>!rSCl>%on<$^Pvml1l(jS|b#lGBFnjF97RT*Ohe0)Esb|2B z|8=0lb{XGyUdkBIBCK_2p+nkJFcUzH!uTbA=E`K?hO?@&%$6BS9hf+sx6t_w6emTl z%25ZrRP^8Z(vlPgI9)m;nFNV?Pse_(3+tYtN^ZFnH()>WUbWsu-1b|Fb%E+mbA5bc zy2p~$G81=bUod#_cz&R3b3=8uM(IpX{)BHhgG;Q^ZxXY=yO73hNO;KKxjy^H2eIl6 zSGkmeUmH0=Q5m+Tm2|sGmX7vu{9>1sMu$=l&QZ9>!00Lle}3$dEkYBpIFd%sG*p3G z)J%%#;>|kFERTQHmf^;TYfVI(q4(T2d*eq`PZDvdNUCem&nw{pmw2&Cq_$q5bv|x1 zyep``dubNZ2rZ~c3=-@DpK=zPEp_BO*_!|TNQO3vI4X82^QIUH7V93649mA2TG6nf zn2+~?Rd&rlVy72bVpU|J@zYh>OU>Z#!6EusEOt7qFg@YS11M}sKef^l$9#N;M~0gi z5O#_Q{mQyp@VCU)Q9E8yP&zQ|%|O3^)Nvg&`?$4GC#^O6{l5())lBAi0`&3_zulum z#J@``#TBzW<(nc}T3fZDjUX0d!FX)FpZ#X37ZTxkN_$|RGM~0a+r3vjUn_vW1t5mK zUpJlVZwOmm?ivlnxxKUpsg|6J0YSGWfJIo*mb6u{zv7#i0s>Kb72-T`uq?sHvpt`+ zGvesy*bs9ljL=(wvz+YAbUeV=_Y9X+<@F;fidV7HDaMdyoaHg4(SyTEJn~x~Y{>@M z_K^to8g@f-QA^m1lvWO_0k$C}zqphpTG&(XX`ZtjTc008qQ$Y6azdk}cTGH*#`hh; z1Dw1JkZ16$$hO?wA^;Gi9j_2RDxGnmlS-6XQkKzhn5AptJu5Dcqw*zn8a@52J~yaF zL250BCQ2)^L~p7RysrvJ3lOg=>>o8dBp@3D0-h_g&B)nXfJ?iYfN9pQ*5xV#Wh7Xg zb<<%oD~Heo3L27^enJJ%XE-E$*k6%OQ(l-JU65l^X&?o>7?+KN0e;eA@=;?!Gu=5$N8s188--dh=& z+ObL@Aw(33wk#70JoW<7m3$_^twK$?PTP4ui^^xNF!qFkFF~^QfWqn-U5KQ>&9tY$ zI}tT0^2t8!s{4OJWG>?t$&M!?nH)DXwH1{o1W{__2s7BBR+AN-+kh)L0oET?^%H z8t3tV^>+56CiN{^3{`n;TWyq5R-rDr@pj2(%)M&#@1X>%&e5z7s1pS1_9t>h@b4GL%h`(3G=@Z?wdAb;zn@`lbxG+T#U zKB|^6WmZ|ytS};3XR?O<=lbIrsZ_AeHe=iwiAHyqnlJsXJSLs0${$4DdHiI21MumB zq0}3!OsnX)zKCniw8#Tnlu_$?bE#Qvi;BrhW$oFm=cY=G5qTI1#fIDhH;ciko250< zPAFT@HhHP#ry`yg-Vr1~_po=)uq&hi;E*T7jIq)XMoot||0&!Ubik&qLy&As7l+le z&!0G+jUCSI;flix6n`n-kS2+^ak2;O5qdW-4A;GBm`KSdX(AKrYYdIMNDR;lPTnY} zhn#uP-#I@n>n1~rfEa2fSq+5ExZuwbr-&AG;Z4eZ#2YNn=n}cAiM&ytd4hnJTj~#rfK8b^-4vD z%E-L)BMXzs9&}lb`#ySSX)PS3&}Ugp%rUJ+Khi$GfIF7rcdj)35>Gx9(bWrgDMDl~7(|79WdyZ!%A`bm5F7 z8UEGDtpBHoFK8l|Kgb44KbIsIo0CDU5mGg_7z-ZHkQK12vQ``p-> z1iweU+ejrI*JAEK9$5*@#?{>ovf81^oIgzOo!Qj681o9f z3o3G=%h#lGXVh-Duw_iHbYu@^%CQofnumdtqijoIl|7WD+##4-u;#E;+GUOzn?>Dv zk-WHbL@0wvBtLp#Iu+Etzsf%nxTkE(DbB^X||+mY3#Gm z@r$;f^91lNGagBjWN5c(u}1{{WBXQE$@4J#w8vOC2Inv+IBF;9Sg%}@Lm2ZNobUs% zkyFGj%*FG46(JlTGwMs?UwN+jHT&|8@0F}Ak?lBHrvdT+qFTgW!x@NSiL&VI;4h)$ z+!EGq6e}kF-*6M;`xiXd(mei{9@*o0HcUnvGGDeCLCO@qpJhBn9VGw_ohhgeq z7~EJqUiSDe;{u5$iO-E1N6`)dE=0fNHiKnQN5~Ex55?qK7>!QSL@(?x)@u{ZLBPUs!sKAt$e~49vL0KI zP1?5z<&4WApFIL*py}q?%Y!kZ8dXkGND}#O@%T;Y;#U-684c$bDTIbJ)>~b&WVbCc)DJq@>aE6{yD?%kZU^fBLi?I^A^%S!Gfo7ddEF~gKgKP;<*1EeM_#Zn$7pxRJ(7V;^N`^}n0}_mUZ4fET5=mIb zF}^?J$dl1;jP55}ZLYWHSc9C08LyQpGAWwh%^z1*cUdg19x9TZ9dUE;foQ}?X?wwKD1i$rge zbA3XvA8U&;#FJ=PIG_C+7v@xH-<0-*0!I))rGQ!_n5?=l;35d=VgobQ2Kf>xJJ6GS z>ogakc27*>hZ-U%f3Q#JiOdvA)^U5-S|GCGW=cgNH)#9nlpWn)|Lop?YhSF@#l%>nNC(!*iQZ1Fx;iOQ$tTlm=(!4UN3hnI=(SFT6FbXR2xqk)c|YS1o8Cj zNI{MR*K&bv$tPLnJM*uV!x0WkPh)V#)3t^Ry`d;-o$7(>UC5n$?DI||(y`#o=N1SY zuQx@|A3;2lok~C+-ITtqvE!r`I^y&Z+BAs;foEYV z5ds`JB|xJBHlsi(D6y@*UvmP?G5j*7KuaqC5v>zq0~-}UJNFHc{Iux3clEOla*eqs zm@M=(e~(s++Uwp6W-5|rl}P`3#Fe?_NkV25+vGc;@hGG}j}m|>ZI)ENF)Xj+hyy-N z^uGnZ4+c+H%%1x$mecMIuC7_18UiiTVJfuKq=7J;UlfL~tFsUcDVd=W*-OhJP)c!Q zfdb?ShGd-hJ6Wqxk<0l&sXeENM^}ozT3{Iyj_{6@ZKWo*4w=6mfJ#BHwBabkCB7F8T5lJOVj|2&d}c##3o& zYWCzyIXKPrEDw_Y;L9j(plO(xbovI9&RUQ<9B_g=q!Sne*A0yuYp>PX(-r#Qggdh z54ndgh_HTCy7dTM5+vwY%h3WGtk}i+?Ui7Pe5}JLTe~PFqFXXpc*u2=OrgCb4cAAq zVf@g=wre~JT#S%mKFC6Rp^D=sHM{>X`25jiP;!usK|cO*Ea535M5{+_{$d0_{|{1z zV^FaOr6>edM<_+Xc)v>_yVAmySEoxFPvLU-8^3o@BO8ZadLK)J>Sr{!Qy52!G-^GO z&e1Bl|Kb9IlTP&ey48tqsy3Czx_qkcCq-wh`q*+4Xxgmv9mucEnWs!=7x9L;?C-TT`nQhvsRS?1RHNr!UM)??qFAWl53L*c(;f<9w%fDCMf03` zuo{K8iD|Jso8NXDMsqMcwhD!}j`o0Q5EWp5+kzl(-BF}cQVB^m` zFw`d@J|H+5zSP#G$&$NucNbPJw})EXrt>*zu1mh*jgKnE8)e)H6{FZ&EfHln?LOef z8HMkP4##9w+i}#l*YX_8vu??AP*ft7pyIDPTBh`$$mcvm>?CC#m8%PR{!1~Ls{f%% z->o~jF8r`JtHXJOz_6&PLa-!S^y9vm6ZTD*HknC>D$xpc9)=YMuAJD0lEdROLO+Zk z55Nu{n9gVem(tW0coMzIiK`HT@2REqDk-s5f(*Ny;~nn|&y$lml^4 zm8kia%Ce^n({`&WLmZcWtnkU5uwxeWGj&XO+%UZ4!pp<&3d1I5>B+Q?$@>Z?FY>~1 z+W{IxLS4pq(6wrwzC4bb2ZJ$w@fe=%QqX|fPl5r@Is{ez#gnMHVo`{9)kOierguKD zBbM?V?rsZx8;C^Lrf692F80bICm@(+FqyPZmv3gbDoq z*8-O#ngO)}IH@+S%LfUW-#DDq9||_QiDZqR;fwbX+7D!Qj0f)goPaE-wFYZ3)e(+~ z0m>me#(JpklaDBrGO0tbHkrT|9Ya7kT-99AmSnye7SIG*awO6@UlTX@cTx4IvQcw~ z1r(;&vLoMPha%xLl?rg{*;>(O{!g|q6cR1=`X0S0v;+jq>YZ zB;OZO`rgcgK5}w^P89j!f#8D=W+J+A+nZeXC*tuU_3Kq=B;wa@R{QLpfh`Nw^Bm-vy9bK;muG!DTz)(H(d<$7O41zdx}$vZ!Sv3+!ttK;8FeQBT)CQ%eK)_D zBxw4e>$_F|2!sJ5BR(ddoH~}qRgiikM;8`c8^e{Nci>vF0Zs}S$DdE)&=5_Aq1{W^ zQ~8+7PjZ_DoJtru4yrxLtO*|>ktgN3!-;OD26D8WvC>q9F1CG$iV^M2!VbgItb;JN z0^bXha;ZA`gOBpC0zwWd(>q$B=f|@J1^cgtuHql>uz&QH5&D=6Ni9N!Vmo~WuuqI< zxF}YTyohNsc;JKO0`qYtp1hgQKH+|Ik6uRZdpQy@TD6t^E;kOcF<=qnHDkE7BrOj4 z&HVYr6$zzo(wMNmw(nY@R_G3gXG_mNW3m`<-8aHfPboQsWSFhIOJGC<6+6!CATR&&eSJ+mXXE*?xudFb)|9goi?=3H3|Wi4jXA$JYF z+7hXJI_E2G!*K#rBK3cBNukponIXY}ig3a&oOX|y(GL$m?~4SKYb9aN>pSBJ*2Uuj z{6ejdU0L6V{7`Uda3doc4ngoX+Jkn31S9flwe0xbi=a!=56`;8g{y5;x7m|P<}+Q{ zV?qv(9Ifb=bws9BK1cb;GCFp&&g1gR&KJeAX4K6UTorc%ANc6<4@gt4+A-{aS`liK zog6!2jUY)505CdnuF`63aZvF}i$hSol zUb;Y@bv}$9jgzFc$EW*&o-c#Awi}2BxJ}^Q5|J9XPt7yN9n)d*ZCpHEPWm-ESlD#S zf%A`8cgT2?`J2*XQ8{A&M%zxJ*~?mcP=gN?eL^);tdWoD*I-T~KWkNwAGn*J|74gd z0h&|uNuMpRWC;EM;(ZmIW6YCJ1mxu#eWN0i zJ}-b{Ig>y>?rzBow;=&35EV<)hxfc&5&uNG_(UcNg^y-yrT66sfjwD77W&in@vOMS zCQ~Xec6eFU;x%WW;DY=Zq2@+yj`&*7Q2}0rfV%PnnK+94Mrt=++mW7iNZUC@=rDzqF<#0uX2A9)ytdNj51G*K6W{YUzrn1>H z-@Egoy~=HI&prtGWJfn@SOv7b}7646W4u^9PBx_}9+wbq# z$w`@`;bpd9;H^!uZQxLvyQlZM+F`l(qg%eqI_FSKgy-LlUGvg5DZzsXXo2$Z3~w_x zLj4}yHMB?J(*nLb;P@ebRX#JUEtLQl_o@#kJA0)tNxKsmfYMmfL)oZKQK;4GHJi14g7 zj7@bHfC2i|%B8iJjsi#q<&%2-Kv?dd`PJI-G>bk4I)rD?S*9HMs4m}s1q_e)20*^=Yg7|gT0Omc#3QYpIf>9vQ@K;0OUr96qLG@-Y~t7l60Ei+ zjGm^KO8-f(gO>KzL`n60Saa2fY2)P(RA-J7hYY)y=M%tI+K^Aw3F=vim{~x*G@%m@ zy*TBI`jZCne0YBXTh5tXCud19PP;Fx1GoJC_jiylq6)#tj}NCCFAum9c_1~SW5oXd zG5=_Xk~RS|%d$i=T)K*}MNt{T84N^^Gk5@zjc_vkyVL8Chs%8dV9lx)Y;b!(N}ew> z$|rG+2(x6p8t?7WL?@#i^=lmh(J51o=)E;x1DUh7$Fy{MSAC+PD)Mmw`43UiKa?dcd}!>zHO&46^hCZi zV!0%@S?rfs=g|UG6FkHbwi)k2i{w zc$M*}MvYszur*Wrb6yLcF8rk5+P`Ysm&R?iTwJVvIjwl$pDMBVE5pOr>x3KRVxYO?99W@7`dQ(LBH357XTEE z_?WZ{A7)$DWV^~6WFTY;Hl*hamRoIq8SRMgI zj2_6T^At`m9afJgVv%L*a&ddrnGE)8&G?=5*4XLn3UdcaYa`X#Oh3xMXTIc9{tJr> zvUtSELeV}f!<_P+M8$Uc@FNmi5T>R2Q>)M^Kd`9?{o3WQ_SnddU$~OV$vlPc6tET) zRi|_4MkNqP*)|g-+tY-q%8fRE?8z#(m{ia^UhhAusA?DHz#VI*RHr?YqN<7DhHQ!3 zf?_)t{%P)-Kh)$Df5KF+5L)(QNG57C_Y<++~&UBw^hg0560FsY#< zB9X|*kOTRc+)x4mMS)>RKl4?ww2o=~A=+@FC%)xdOOuDcpHpHtb@}^v4j4L?E>sv~ z&K%tQ5b2>GW8g2$;ou%a35`|idWkk#4$bo@H{w&B*LWp^C z-%%T$dVy>oY!KLxA(L=dqweWj1})7c3vAUDj8KZyIn`J0DR+%ckYqv#el!$ZxNh7R z*5=F0If?WOs=i>^oy;>IXJEIX`MqKhZUe$Qs0>7c3#+mCP>S36&P#qnHCR%UmSdyE z`Wr>G1E(%%t>Sv*R*;A$WEi$&kdlQe0p|{^rO_^MDuw0{gor-JGc!hb3b0Z26E3tT ziL_pxz6pK19gpTbOM@Hi@j2bQr1zF)yc-4Iv^e2fvKab}j6EP4tCsbTh6QfDMAi>jWcd&i>u@tkp=CYDmpbia64oZmmmjY3VlCHoy z$H>r;m+P--7H zg6Y6gw#smnCz{#LQe#)SgT=;7R;6;R;Af^}PgVKk`M~)4>yfjxT*`Q{el1F)V9sv& z#v#g^Y|uEd#Mj4#<8&nd*)e*)HOV0sgzR>#itQ~Oyha~^fw%D;79%iA)`-gCNY-DN zBC%_>T21k48!FUxz}cXcOJVgX#70IZe196Zilr4`Pcn(7&bit2;!H*LQJ@A( zt3iPw_IP3{_0k~+BMybus^|iOJri)&HK?_pfnvZ`KeqS!eRJ9>fHPVT%2gEJdNDkHRlf}#MJ@&<&{Y5gOdL_NLN#KK?0JUXhh>+_{ zcI^&Sh4!O^{@Fl`0lWDEsKuYW8i*pkG{RoaB97g;b{(iitfm0#I{D-R(pS(2WvfHfnHU^X!!3LQl^e^n#&h%bDn&10)tTh|UL%`Y zFIV{^HECmb%mJerTErBsM~C+8U$lb=hLKd^g)hzTn?R2S3{rSLK%yjrBl)U*7o{GM z(}AZIBCh?LfO=g_t3Zr{EM2VFJ+7>-fNK#y2(DWum=tZ2oAgkc##+`cjN_8<7%eL) zC>RQO1M%uEqMRCXyF&Z+iz2;FU$|q%U$TMy{vtGD(3>en@X|{2rS296?!g22dGY?P z&=_QpGD7{3bT9C(-5#s(k(%@z_4osCgu3#lzZWuximka20I1(ZFxh>5?8N!)z`H5< zj}e44Xfc?!0vZpP3Cb~OlEg;`wfPSfJ<5z0sS&LbbM|NmU&O)+8-`z~tuC!@uElJx zqe30mMQ!W>40P=w95{h@bax7uqMF!NLUJ4tv89L7c#E=3zv!?N^tI)%`um_blRh^o7^ZCF}LQCN6 z^0RUt+|_?LsSNy)J`5CrFpSHSHh1P(lQYZcAI>=n`s(GE2u8aJG8b2AJjIVoMmXtA1h#Kjax zao;ZCvurCAd-+C@3%SSX8p+26FbfWqu>p?oLNkMtgu8CJg7I^I&{&B1W)|ND7 zN+AUdXJ>{vC@*obzq@Y%rShp0e(eXC25%;g&FZ4j#30HXj=Q!Dg&hqI@{m9fSb4z`d{T}%ySHlpq7Urp&1nbz$7X8M&3SgHj>8YOMfRnp{OI5C!ukv>1hcC z;sx(?a1L|z$o7CwPR}VQ2>$Pc7iAd2Ky{DWV^ zcejD3;;8C$P%oKxKRAJ~lEj;JJ+EOx=FJ;g=Pf}6f?pgZT3X*%d};*_;fon;Kq3o_ zV^1b9D77VXGf}0b9}ml`|B=Q!5gfw)oeJJyecqIc=(e-8S-OKBre-d+Y6Ial2D(82 zR1jaX`*SDnn3(V_k|OrlcnZ$RC_yP{DNzpYxkW-6zZ4_>nz8>`#WzfJN7;F{UUGa5 zH7=IDg1%+KXY2M2dFemU={uR;Waf48Hi99%f)C2%QuqUop=Z|sjXkX`Z$kBkXFf0( zV$T7Tnwh)g?zjdMGYZ95Q(U8XH1b)sG2?t2laIZ1T3LR`8jN9d(E*ek(6LAIt>dX5 z&<+q|ni_d(Daz1#(GRL(8(j(5*(lm%o3T0o<$oMc01$PFF>T21*wZ?mXb}u7TL=LQ z<2XZxEIi(C!cVsi0bu8qHL~wCeN&VmI@4|2wrykDwrx(^wr$(CZQHhO+qiSS_1~wY zk_sw$2y5?5SnMITDYJUqgY?3w+skMTp7;{uA+g=&;K~)Xt~$a@WyD(y>xw4^^i6o_ z@g>b*Oaj0kSGz)ibpYx&PGTJcwsl^cFvBb;kZMYw4J9VyQ;|e#`RIo`f!zh7r8Pkn zvYJ{(f8oiRp&@Tjr+7JDeg_?g4SYh2t!(=w6LR)wBf#MVv)rJ7mYFfhp*9E>+6A2x zPaTbg#9%}_0+xxGp~FhhPvst`Hd;0=3wNg4t!Ph#kO-e|@6ktA!?n$q_T!MG zeQo^!4S%Sz;FIztz8g8#{XNp`4q+XL_H~_-AG3VIQ)*uXlba3bC=HEfc8K-du6uWo z1~ce5%dl8iZ|s2W*H@08ir5V4=q+(G1P=H?trwY6ULPXhUR(;yLG0A;X#w>eveS$ zW@PV?hNEM;Cvcde_gE?AH8=cadGx^kd>mCd$3~2X`!X~NnKRp8Rh;$yv8eSK)~W7z z24Q|gf>8ucBz+T%wWZJwz{El-uWxWJUelG^kw6TbUynCF#!dJ)hm&I;UA0Y8$sqx$)K?1?iyc?>@E8XPQg$4Jhi&7PXP_tE z7rS<+W8eM-EQjHj+pf($H$*(f$U9a&Ov2u$cQu_=tcMB?%=>0`4IhYIXv8hS_MSNe z<%kWMj$P?iM|siWmauX51RE zsIs+huv7B`q+gf^yMVA65Te0f*XT{vdrtXIOT%co-yWtUMd$ib{C zDT0v_7w(WfHnlj4WJTuHk*vXT;E1%mHV9>r5Z;=h#N^24GCXoV%UGXhIQn*^*WmJM zs4`av^+peU0hE!tWZxLgPdg}$J#HJQmS?2Qr#tEfq~O|LO-rLnL9j&H7mwI8FvSf_ zdP1X2MH73Igry=o4c=#qHbJ$uwe}(RvR{AeS_#{!Gt)6RV3lCk%$H>6n_`h08K1f^ zHgWRKNPaKI zH*t$t&^&|+-5LZtk~F@$Lr{fkj8#dkcAvVR&cSmn*Yn*!PI?0+;sB&c#bY7;AXUyn zsZy4SgizI__(q1|2J5jc&^p_p2Eq8fCduhXw)exH>pw#YZ|%!l=R6;{j5hkoU@Nwp zTFDD;hHu-bu_GkXx;&P9i_cI=--w{= zgEKS8T4;Bwie`2ut|(6JAbhPQX$L<=<)@{ClAb^@wA5V8{fai;Yj=9A!Xy5>-@aB3`&$Na~%!l|ubSULy5IW;QsJy%V_$>2E01_KDlO9+6)9KEx@$kvtV zfe;qMEI_U8z;1<*L3sBmLLv$8avax}bGehyLwInunsN$^%H^GEiJabH>#~x) z6s9FpmknB$ly+77xxUIOM%~VTPdX(vszbr&U+0BovAJzMZpohzK=XjsWL|sr{ru@QTyziUj5`V=SG4)-jVxR z#Ps~vi^%cu-W)FMBZBZCp?qSirWutK|a{ z*eO(VP0JdvacqW}w5#=^+j2rR_Frh zy}NA&E=qg3KC1u)mZ6zn+hM90INR;9w!%pLjLmPrZ2qP`AaM;xD^9p5X^4cncng?*Zrdedxd8JZIXJT=*E0;+Y_!pW0 zZ{{ujZrb!AV3C^E5E9*=@H+=4aR@)(4QCU@4#;V$XP72=+<82#8Ml-mp@?jE{NQFD zO`(k4b%bz63r0$nX2+YT=Awm_q(D6zZv9CwX_+n0y*L>-Slxi170Pq8>JV-giGICn zj5XepvKBK?=DXbX;Natu!3!D(ncLYK)7__Vo!UZhy;k%yoi=V1MW}W^XL2Tfe;e?7 z^~iwTlQDt&lUcNc6CjbI3*e?D22}1W(>oJc=NR&6{7__b=LQ&ix{!IF;JcH(^TaB6 z>(t4Vax;ie7Pn|3$2_@XkTgpnX5}Uz6U%WF7GGiwIDdt74QM6lV}?3Ue*rEi0plO- zQt(uD=aSh-1AFcid%Eemj5GA=uDadh95-oE~Oji2=x{l z!E}ZtEzzvQbsbp7GS!{~UIx2>>%~)aCZeAQfU?veOq>D`Nl8Rxjei$V2$`c^x|wJ+ zcJ-rZ9n17KoQ83^HyL}Ek}L8>=Yf@4KZ6$^coJIu&%$g@YpZvU5qH8GSODI`Vvn(6VW7a?_^b+m&k(6o0?t`J$SNwl?agMLjMo)y63-=MYi53l}2RzUf{@_@+{}Rd? zY{4hFa2I2`na3S6c1`pgirs`Fc1tN9Ijx_Vx+ zYfVzo$0PMFr~Er-B%=x4UQQ%gObo6`Oa-r_2lZP*wmW&yw%3SE62do&)BxgW{I)a~L8PhHMCb;1d;fw2ooRuuo00>H(f@5ydQn z4Wv7~KZfa0Ofz)=hR5xG#v#v5<$SD~nTuMiK%83&vCy;{|Ni#o-k|S~e#pOOU$EQ6 z$xUr`q{aDnhA@hlk#v3-$`v?%gCRIUiKJq0*Qp8duU3f7C#Kb6fN7OV9Q(XqyDP{g zymB3UjiH6}hu>qS1)Mc0*|S^{0UBi&?FLwDghi=;;{hoONr2PKkWwFKsRpqvE{RL- z;(2}N##QcSl!yr`{VaT?eInUr0+`MzU+el~R0P!5*T9Upc}quJ<$uTeL-;{!cri(s zg2}Sz#U|jNVDf~lw?g&F0?f)7Rdef@Ls@W?GFwNp>{adxUJYC0kVxGs+NdK66F@-y z%I$Se4pGI6<2;Yu*QgUjrwL{bRfB;+iM!cyRwscEu`(Gal?d*%gQ2#q`m}sw0g!># ztB?%lP*^loakg$+j3XT++?vo*M+936`I-DQj#F(|POzi{qH5jhpOo!f_-zcS!jaD^ zL7_sgd;GR-1BUGzdc$KRlF>O{IFnFWR9>MEoWCSq@ky+15ph_VXfrS!BuPQakwgXY z@9{m8<`ZimsZ0=OBhHeB)sfIJk?}CLucj?Nrh@IwpE{qO>T%Y>gsCQ6p~huI%m) z_iW=Mtl9jSj(i7=mXnfvC;_TYwjugC0vAG#`9wUu#q8_BCQ0>LRH{MuhZN==m&&KLSq$G@t3y~w!Iz@op zi_IYCoL)-M&r7YB?yOV^FViIX?inesg@;RdXs* zEz*=QZd>dT6L>|LtArj?U#^z{oJ}oa1}0-_Mj^Wvu578RGpdCei;JM)diB7qjD&6F zhT8~cGfU&TU+kudy!P%94hXK8=#xH%_yn+XfsPS6X?erzJ=hfD{zJ+P{9xd;!kEI> zE%`4d?B+e&pUZwRCDCuohr2SPK6p%$KT!M`t`^!{?!^AZ-o>SOR3Syji%vM}*Oy`H zSV74LPv3RSTE*njBiPViF!$Wi!ASDUtV)iHUipc2bR zZNP(M?A&w`Q~MLy?u4$c77x|Lgg4I&!pG@`k;C5fNh6P`Bt|WuIsj@VjYzNuXn9hX zp)E^kbfkANTXvccNwjj9Q6B=EnD}>KwyyKZ`Wpw)!uks4Zj2tndPa{%gpe8vH||mp z;HETkPWY&54rv;KNduqT2S;Me`a_@JHsyhx1Dan$lGGC@;Tg1q-eC$gC8OKjTXId` zt3S8k(vc4_afX=A0xb^J&>iL-g}f|E3^;JvD>&sWEA$?`vKz8|8wSF~l*B0Ldg;wp zbsyvX4-fk&xFJA|#q6wJK-USXhMzwnP}SjOHsrcFP2EgCo-WqGG?|n&dnPl`-Q4VF zxLbneQ=XfwRW(TginMr&?{kh`uY)w9@A*|8l!Jz02liRUf@9IXIZO{d=>uSw|_lZt0E(9IX_1hfpjWNBlMX2ILVSXOG)G zV-nUW2HeK$YO9>c3s5AQQPv6$0xP>)e6Q;Q?x!QFwKywO+lNtX3h@npm__zDW$Z|7 zRQ5N!wYuPf^5qXvc~@is1%5+Xfq0sl5EKE}tsuPFpd+bshlyPYarzYq>15(CH0oxh zNf>90#{?CaG$d@cO}@?3&an%Ct1*oN1z9hT3O9{5;eC>GB(Zr)bV#-0uU@ z&w6Q|9k{Ep{;p@hq}`7;PZ3${Cc{RP zUljWZ_*M)Rx+NZeK_Kq&1I)wW!6#AtXfGeUxnivuS5c&akj4p_J{t*#tA^06!Q6^B z&VIN0ch|$Fn}d$}x%-+Gn$E`z71^$Go{>#;n^?i0;FJW#_%jX|h_JNoi3ZfRO^k=z-K8tS>MId9s1qB!%3bQUZV}<>pXE z(y%Vef5ywGW5!ZPT4Bs~fn1%Jyr3<-v}3v3yQZHRev;?wO{ZpXULeryf~h}cMNLHeHhxac2n`F1B|y!0)~qUBrTMICpN)?4SA#l;h_hjrQIV2(21{L=fx9PcIW;jB9?w6`x^YwUqr>k!Zs6Q=n)8HMy~? z5ZOcE&4EVHG}z>=dl}azvg-&r@5EyLfWsu5A^b$KVOR)QRL9H{>-NSxn`Hb}Moh@4 zh~4!xBQ2yEX6m?Ms*|Ui@IFyf_K=+%k)WBU_rO(P7=KwzL|yU(@36aITq;$_26)qh z{PIAe6tc#SX-BODq6=?HMZ-W<10`DY*soQ}u=m%7MtuDp!~WjK$Pyh3Ountq)M$D% zf7s=PN!dQC;rb7ICwuA$KL)$yMOd%BhI^3ThhguP)?m(;>TxLtx*K^+rcN>f2dvtoC;fGeOXLm@tFDN7irv9q3w`Ema`tK2DK0 zA!0|=>$H`mEob4ntoRoCnFctgPM(3*}j3xRT^N8v6Bj*Ti$8 zEYK`NYPb(27h_($=98GsP~W$cUqoVW#$;D58g!FpBk)=C%CyL2>7kX8kDBptD|&zAlF4Ep+op;&&83~- z25becJOrT2*pew#|?>u()R!9-d*& zWx2m~Dbog?CEaGtK&{tqd4o`1g{Aj<8-Z|gB@H|a=0t0ah1SJk=k9UH@MxhS<4I*K zNEplxe;CAo`iXIUyCge0$*8)CSphVz;+2R+5DE=6YyvU(Ye!UBz+WTkeoE|NQ>L&A zv;*7%d!hj9y<`}My-~(PtgdGOhpIjH@68TkiL*0T%0<&SEi3XSTJc(ifHI{uQLmo) zA%YrbF1nrWg7Y%qqE<+G>6YoJYtFItjzv=vJSLDC{dc7HiJmKv{3O&l5$dao8sx!% zLt?fw%?|y&a+$hYi5n5(-`y(DEtkJ)!-s(PoT4e`)$YQBCsOqCar>1qBUh&=e-cbr zh&8E&7!!5#`;hBLu5cdsNaLnXsGlN(F68;VL7V0r`*9O+tEN~fdM(3>G@X*QYltqx z1Pnh7aAzuOfx-P1<#H+Ib;)|RrT$G%R|;!}HoMtMD)h?ZgQ6~wjz>3GO}>Q-o>KqG z5oQi{Qy!=*&QrE5{)Gci-287j{j%hAIM#&y`sw#JrlByo{!oZHc$w17sZt7FZng^M zOX1STK#kB3)8GTnt7knMW_|5KCM9sdPpGfq+_DIAgpRiFoW6pNRkVz!06w3GUB(1GFqQ>CFp4}O%WZ^#9 zQD{6iaRE_gZPKOswIR59tR_=SR|g~-!kgH@3Bd|0P1v3+da58=IS&{S(>Ppy>Z=@V~tONW|LeP` zxs@>!0W-@#vlMxG|G%04lmE}me;Q84|17i8cQO_>HncS|hN71?wlQ@wVD-x;*H4uUVpB_eh0{kFT8=D9VkOp(jgtUv&LpD2e)g)>3iZps2ZqjrYn6LjXHr6 zUiiW?wf@J82(;hza zY=B0qV&JJ+fC``U_u;}Oxt`ZEi%IWWz$MRtPE8oinizoQ=%ynI_sF4y=Kl^nD{%A6w*7qR} z2DYO*b;E1u5_e;QMBk&LnbYioQf8us10X

    tNpck;* zEAwYSMI8kNf2bx4^zm>po#wPOeeS*S(`(j7BjABQbU{J~YJ#~*8A3qzCpNlf_P2Qz z#5mZUgG&2&o-p1LKva&y;|l3iVt%UDvUaS*Qtoi=l_vG1Bp~7+u!a*8A~1+vy9j%- zQZj$J6)T#X?1qWm7&Z0^;*4qx?HfhTzs>LH?#m||^4*mv#c2(MT$l<;q`pN1+vFOG zw0uc?ev=2vLFQp4Jgom6ZpyBTF*O6q*I&ELph3w|Eyt3RRzP&Z`NJ;AhXO8$)BUo9sx|@HRj!|brlRER} z=%3$ZoC&4P!($UZYgmro2HF0`g>lG&cs12hWti%yOytP{5MU;#FwJ-iC}cF42D*MX z%CS8w9;?9BF&p6A0jJ*3B)SjAq4yEBu(_ad=i@W@ym!eQBjp7W-vm_N#NIvu0DT>P zBu6F)NF>YLi|OjKeg}HIW~EL}*JnHW3uHzbMBB{|u+~j|buLdKi|e zO{fy11Jlez(>2b)=k zF*Xnx>Py=^Llhr9tj++l%{wAEnff=FOa0IA>pDvaSsR*k)9}`&8IB=8nv(*U50yJy zK-4TK?udh6HOzIeI}&I;4UJ8FqxpP!Ycq9~A0-Q>U&%js{7st1{0WN_#5;R-=N$=} z0I`zP6TXsV7K({(%!87aIc_{54|=8YM9y&9DPa%CGLaR&7SRnqq zP%)4YJiS8>`Bp9m@S%jQab!P=sS)@X$YsP~{|-%osG@xFK6t|QbwlGl=_Q;jyLeZS zI*0xak4pyJ5l!e69c&xuokTu&wG}Vk1X;J~b}*s-!+}nK1sqDqd>a0CV!rwL5XOvM zXRS?vdTomb;=Sc31;o!~$40T^Y&gvf_rVsC6s3_h-RW>rKIl$VW*4RyCY--}cVYv7 zEXc;kGX_06sxSlNgG+%z@I;f^P}4VP5Z}#+YzY3Iroh}y$!Xwa_e{GomTPkR!4X3Z zRftQxCqha^##`BIA8SLQn+Ql^d|;nzH%*OAh_}JQ-HrBw!NSQ4J9P!^mpIQ4%mCp5 zhMRDE{MZg)+M!2bKXd%O?`2>jK@bc&SZF!?yD7%*$62gt9nd&VoAL|&v}ftJU_`sE zb>of^-GOxv{P7`xb(2|eS`8SggKBQ2L)DBWJ2^eSY?SoUmry2mW>yrIfCUR9<)?J( z;f=>SQXUyexulMjUa4tgKc%kp(JThbsL>W`T?ABcg>14u7wLKJnl<`&dsQ~rD=ulO zPV*B^ze)*?w5OWd%ZhNIB_V}mmZOnjJSH+dwr1jM7|Ka^@eULv(ZTCO-!G#i+upWrK?-+{00

    e*jh7@3@`zQ*OdiLa;r#1iZDaG|zg&Tq%^`3ZQSBT0LOpmUx>K_&L z^l5~0lUuHmX!~bUby?&sz(n=d&5ADVY}%icyO35BH^DTV(*+g{@5~B7<1PJruO96v zRpGiE$XDn$B3A~Mj#xq)>oPHs?jijEoj(i34fVV;*UJdDD1`CCXTZPHHOY%Kc8Fi( zAKDCXslV3*%I|%Et<%9~9UO}9kdju|*Z31jxP4y>-ul9DW$c7WxQZ>RDcsuws-j%;Z?}WM zC9e^89+=H3=iXTmM&}!Ma01Hdgqg$_z_Z3Q?5*J??)|f?(?M-(FFUo8<_HCl%a}85Uv!7|DJbVAAzWb|D{~rCIl2o4 zGKa%s6!q3Vkbe;VTrsN~FF1YMej`lsnkr;e5XJnV7(D?R2mtXvizCAt8-vg2twn4k z5uVq(UwNDSE4BvpnEH-m#X$@`{9Tkfy)BJP@Q)fqv*>Joy@TI73e^Cr8M&Og1$P?1 z@;SXUK6Tn4=$yONlj;u%!O+ZeJeLB!^@(3V8Oph{HaR^y{7^TdxZg-gGcvbyNo8V) z7{pqwCjn)WuVGnO0rk;umD5~mQe9}D)(mdn-%^t9cOzO#s5o751v$0z#g1 zRpA}N_rH`F1#?55m@Eyi5IxoTs8-q&gGyIxjQpH(LNSu)5!DoY>hW@OLah_CjuBRn zH92hFvI?n49Fv|xRWK()R8*8MM?H8I6F@JsT}tieI(Mcx0Y`_B#E`pR+OYM9)l$=N zur)!!K1PxqnQZYE4rc#A#ZsdM@YSYDqbpsHBBu|;7InG0&`jCmJ2xUhKofz0qZY!4 zYQ09IPp6IORbvj)Xp!^^W;8y`S~ApQ$pMkwz4@I?SDxy0*-FZBf;;IY@k}93rOq#d3$1t6!D!Y6wtR?==yod<$I3*6|z#YSLVZ=?Nq6D5le<>C*$oBinK0gz~7&#{?}2LKr|Pfg5s+Au5g8L3A`|>qe`!An;&@ z0-u?){v~SDQz0-Bs>mGrU`eWfjR{iN(=e!IvMVc_uM(SbvqNvh6> zwcck1nmt9nz2M+tut?mP&#Rc&=(5^|3O2o{;&+xEB}ubPFCpLNQ84-PvyzI+Vz8~I zdpw34_E3{27$0P(7ZD(gexC_CQ6nd*3of{fgmcN5-2FbV09`FdYOuPXi_KG3K zj4k)TaP47~wrS|I8G&X%Koq#Nxg$d|8l-D8ZNukIJYF7HEN7@+i&i(KxSzFH(w!R{ z(lxLz6RQ{Q774XyzxZxVed;>YmUFUKALc-K-a>K0Iqd71^O7B`8sc@SWI~y;=#DQcAfLqs`vAC!u8LV3nxOl{H@0QJm2k1iC+uy+?l0 zj61q$fQM7VPPVv#iB3WKTxNXVIs=NyRn;g`3#d}1?ec1WZiE|9(FtxPV{D7)ZsDKH zSzYqReqcKSp+kti)0GLI0FM57OAMA4tYAHPRuPl_YTsxlupMNMQ(we6Rc z>Y*=w_2b^qZW_77vkx#Ky36#LBCE)q)zpMBtd9m2?+NUti1c*&^HT*>=jW&5{zVI_ zkLxH_OF_?|FdWyiSUVt&vlsD|u5wOaV~UT+lwi`^s4iht4X~*8xD`)gYTX6YIQ__1 zU>qPk`mi!4UgtYs77df723b4xblXF$L>r!;D(ELd=J^hYXi|l6F^>RwCF6tdOb8+n z#&vlYW%$dA%ij0%SMhreB~#M;t?&Z$Iv9MBF2;7qI^#jalwoiYP?sXg)aBJz{BSSq z7345J^omZTEW)-EbgYSezSb5$#d6img?V6fX%ZNUTy6%^=R$`pqaD!-oiN(34|MyT5)x#evY?i-;fgzxk{ni6kt{ z*iIIm%$MSm4dsZfAW6ivTapke)< zL~P9@LX8c-1X2`Wr84-bUrhur`fh5qY!UXP;T51H#4~pao0`ucEVX4;^3hA4KU_W= zlL7LV=5Ube>59c#{?d-6Kv>TwwMsutp|s$#=Mq!HoGghr+Caa?+Wk09CF<90K3Y)* z3y)#<cGkr{aiR-H=n9730T*+3cXhX=HAbG^HNT9#eKXxxzs0@9J5B!6Wa?ue_ z8k+Qr;b;3m_t5haP(w`B*X;N6KJs$E$wEe&%jaSFyqQwV4QG$IlP%7&;wVFR=!8eR zES`Yt;YjYB3`DGZMN$; zhf3FX8{H33xC}ZYB=r);B=z}5-wvLQ01x?-pvNr&eKJnNHX`+I3*6|=%KO*Xhw{iy z@=?JScE+QIE6jQ7sgB;MSJlWr5;Rl8G0jmUu>~U~Awl=xt??$sIn59Dn~R{VxpnsQ z091whKu!EWu~-@oAlC>2 zs_m1fEB}d2Cxt&8AgPK!bxz4bC7V+)W&34sb1_8`i}$mNEU!=r48FCSYG*yaQP?Npj1v0x7o={uXPib=(zc3rhZu5FSKQMdxaZO~fH&^*`iFPWNwyB)o;OAYt}+ z3z5g$N#B0DDC$l(P()~rS@?~}9xp2-Vl@AstWL-IM-H>S3)&(gYeW5E2Le&c{8ehP zHZS#lhq;on$ZWw*weRZQ=L(chh}CD<17MVrR9f{UD%3b3Nz}>LT-v zUDl~=3uFK^8u*(RR+Lp_ddQCTqd&-h`K~2Av8n~;T)mJPwZ{Qfql=w!VD5*Oa^zX^ zt>s+syXSV&?DOpsYlioVq_%6XxwE~G?&5&>gVnBd(wlwaaq08u{R|>xo+vE&DZl=% z7+RO58B-_2EkvHLw#d8710#VL<@)2DK|iZ$!~hR;p;)_3V4;7Jlu@U+uiIRuhq{uo zGQiB0|9H72Rlog36m;s3A>9R_4YshwblCF(hZZ zd<3fz^l=djAHqB8+4uyCN77V0mtK0iou^%rz_f2O8Kwm#jS|=YvM&c!;yJR}{eliR z$>FWVJ~rp_EWP}}ZZG9-(a6vUwJQpQ9AQNC50y+~pvZyZD&ZxU;Ymoqd0Ewwc&_&F zTxq(XKR%BPUkYj6bTg?sUm6bDYQC4-A45JrF71qGZE#X-XX2|iJI#2xyB?Gdh6X)~ zI#~J;qWNvK_;-c)1Ex9*S2tM6jJf!XLn!ijrDba`%GCMEE}+f6WX0Hq+INEWRjMlZ zS2Co|wIQ>5SXJ!k<9VmUs&*JfyaieKdiLv1(7*Lcr8UWt7^bSz$Vj^%3lI6*rj4T4 zjb5M^UjUI_C?45X!$Ay+Tb*WSL@@Aj9@`b3?YA}SXd;M4K=7h1+rl1MT>Z4^==l<` zw|yoWIJKDwV4abu9@Q)j1>qD5{i#^zonCab?_s-|=2+NBMNoJzhb^B3ZOZlX?a2I~ z7X$W6hR8QYV)N%BS{H2!&jW8=^ECV&h4rQW;DS_DBDI#E@!w_&8jTl`YWCT#!G{Q4 zbv$`~a8kRZ0Nv#Nr9aDt^O|!xGY)Zds6|0VMDaylTMNC1jpBJHiT#rK@=(MIa#IhE zvu6qfyhSq^UA}8M*_`d!77UyL#vR zq(+$M`RuWbjJ~jE$e={3FDCm@0}>;m#=B-nbVJeVJDey|t! zC&lZb2r5-Bdl=Qme;nMHK_8dG0S&4+)g9J~s-|JIYwW`TG?a*VDr9*S4!>S=V~MjX3rU zseSTc%2gUM-N-`Ro}Dya-GULtxm^|D7s-+73HWrXO<06?oZsIqA0GIV?G3r!2fL%& z5&@1wnKp*cB&^C9akkWK50A*4*j#`^Pu*#;j^};Mlm+cBnJ_2@dmE3eMPK7%^c3eI zC|C;?G0Vf*QhG10;0X{V45Z0=R#i^?i9m>40srp#ahnyhOZTRrxPn7f3UOLOvJ@%p zQTUpgCbK2Ve(b=IWl(tPfc*nO@G|)51xg&(Qg7KYNGy0&-qpjd#%_!W1Xr9tK0dI({mc183e^*wT~M0WDwqbL+Iit&wEPL$cT)1w}W#iD_jO z=ajA{#5mQc$NKdwQy1qEdt;-)aKB^*j7D_JG3xAgSCUL#f=4FO7;$S8GPe z>jb`}rxd47jjT{lap{Z-CYdc+@v);R=(4zd=hSdQw=Ob$ix&Q47mhrPprZ=0^Rs8E zbVQNmxUdXnP%QqlV1mK-XAvkc&q!cmr7SMQqdPcF-84*ONOh8W5IkOI1Aixwr<51ls*S6dt+9`O+w zGB!9tC6iVK91b{SH(O0}J%nuuy_Ddaz3O@ek{mZ%tLiMT@h22O9p~eIqRlYg^=%X% z$t;Wg9?tdfj)bsh0|3FgT_kwY`y|+Ps=KOKPWtav4)4b1D z_5fZ!F+R$jjK(P=M`ICPXJCYJnr^iCPn+-Hp8M&W3IouTtH-Iz2XijL)Q(3j-oV z6kL}O*?AX0iv-sxg-QE9N0;CnYU?#|9V4<<+tR}M#1>@rxW-cv?l3Z7&Bf!96}fQ3 z=?44wu}3xn7~V6-yk}|=V;*TgYSau$rWM4=>a{n{nssPzNa*V1|3MsYUL!Xj)MZSn z2BBe9@P)z$$L<*ELbK@z$~f!x9xx_zfI0~?mz6#OFO1SCRawuUhDT-Y5Fl4wj8md{ z7{+f#xw7m6b!IL!RSB_8G83@S3Y>)$4zYN=ycMKObcLX zQ;=UUD9Ek&qF@U6k`R;A*uDGh$rO}y&nI}ga}lvN-#@8`=uNqj5F}{!5J8sPF=p)? zs~p-bSN%U{QDCp1U%YKwHD5+sW7G5_!PZpvLQ0ozg}Iw_De=ziOWl4=nn&@amQz?g z0mpfxju{MbmM;rJai3%;+D>#S&n`q!nu!T;s&-i1hbI82$_;!;$z8RLf$$;k{`dVP zzD+dt71C!zL;Tb9*s!zNRDrJTG5cltGDBZ1)lg}f|x zRvFC8$PFeD8Y?k8h7ShYYJBWZC;8D*N1oeT1fw8x4JY-S21^TrWxyq&*@hplcHk5X z9DWY78vvrpQBGB!f@Oh6+_()Y5pV!SO~kr&1q@v@f8-;{6FiHcxey)Fb)|_L_1z8W zi6n6TXz2e$lt0lY@W^n$(crm*2es3h$0tDL3HRdinEzNfv8pxhMZ2=v+y_15OH~B1 zL`t&HIX%0@;f@^!KRtUNzT_Lw8@Dj%iq+a&vcK&S)<9|&LM1A84!&(p%C}KnbZ_Jb zMG-yQ!bn5=`Xuo3ZhaP=Njm0#c89W{^Dl{Js$g8(?l#8~!)^6L>pwM)Fx;yTJ_RV( zZ!+8mq$!>@p4FGBEKQoBYqC~5;>C2|61`xMZ)9m|H zWU=C@BQhvoWvhqg-v2Tb$VU>yM7`o%ZhmlMWBO}36`q!mv~6+Wpp%9b4%ik{-Lw{j{SXxidB_7mEF9~wcJdJta;)k+&S&~Ga2incsh@|}l z^8=R4y?BV<(D&>~FpS7l07WV}7ZafOG+F_U{{jyT;&#pBEU&E^w#KI;;j8_5`?s#Q zac+ROX5^jB*ux?yC47gSTiFx&UX`E2aZ)!@j8qGbID%w{J#l_m7t}IB>Hm>c9Wao2 zxz}nHTl=%SIg>3&pI#|uYQ%ZFg%0U*Yx!ikv&3kkTTRZ~xHj?C*K=5I1Q%aChTroj8UBGSIHcs32Y1_7K+qP}nwr$(C-F?q2{+fHIW^or; zq$=5_>dTkB&r+SbF&#^Jq;Pg}6|ct%8+~$%hsf1MwjEL$H6#;x2q1T>bH!8_uvk&U zh70yUbzu*b-j44fv{ftEue~!7bK3y*Z6XfrTS{SFGdrAWWGb%to23CPTOdGso+t1T zA;y6^-)l_EEllk|rf#t7mFfL+e@=d=-W@l%*y#wvt^hNaDIM}41$-r~}2`b86mbNcc66j#VatuveM$MCngvM zaK|N9Rf4cu(JGrJemwA3?Alkc(df*dq%Y~Ky%;oX0DxL1a+7iEMSU3G)h3D_V{e%v zv?Y?jPivwWySY>s03+beSq(;_!W#&z^uQytwDwdy#_@16(W+^a`pBs@VUyxvcL=;E zOC)~mO~QF1udrFt;>@aVACrS$lCDKTH&tmhU+cAc4BLkD6*?lH;h}}4L^jk#)KGMdCgqRO|yDQ6lu<5GXODI%;#39vX)qDLtkRz7*-z0AI zP9@5f3@LkjbW}aRK50Eq(<4h(GI0`<22{FXUlGg$#RL*xufm^6deT`Mro7HViIU{1 zs4T`VZQ45;PZ0jT#XqPeN6lWWR4=0T@wjmMDeS(~BsSaUAu?RQwRd?nsa9HrS>Ge& z&YANKNf=&L!Ysv}O4!8Aj2WYac&L!{W~Or=2Q%;2-Ospb@6?1{H`yBp&fAx!z5}cN zfi0bm<5=3EdmvdBzx^$@3gys`9DcpDuNuQ z*pp<+$|i>Ul+#}4&Q_@}zN$95|12e>BlzAHZ#hWjmsxG3p+=yE;S#f9f# zwK>vTVGa;d@<0EaVLf(T*8L5Lu#ttUYvOWfoJnh48YBXD&PBU-rY;DuGJv{p3IUM} z34!nY`m5GD7$w6Z&y?+ROcZ0Ad)b+kePQY0*;PioFYEDO%p7ZFc&^UY5Y`a zJxc!RfiZ|NY2uD~Ze9!fv&nGp2|vAtiayy1i+FOGR;yyA=KO^?8@nl(w~MNEZ18?H zhIJq*)2vh+4W6>i?ooz1EM7ADug;TvL__GTEOM-8!SzhL*LU5)d#=HWRv++$05}yu z<{Y)c0`jltFcvha&iuN#tWH%{=V_FwoE2X=$vkm}RMur`hdmq9rlHQmBG$hucDxyG zSNxPK=U7D9(SU7f5ccOaATRD3hgJ>1ytq7$Z$jUiFBR7ej(x>u3|ObkXNfqn6Ck(0 zXbhd4?euhCa4U^Y(22?LqD7%FEbJuV`T=vvCVW&`fqHv;-SNiO+7V0ByzU0d(zN2K z65t=N^8E5mNhezkmb2_D_&n@}NKn1T)xPZK@F{nWFS=1gIXORz+i>gb-}l?=PQ)qX zxWEY3k*~hIk)$VuIGte3l#BWEVNJ}-hZ3K^=kY0&a9sqzFJL% zy;g|AeQB)F_drR|x+>1u@ut7=kweiy3`mF2cM~{y0Y2?C<2oeMvZ(WS&__vaH)eTO z%~4$|{jpJJ7cd(ZE}z4vC+5J#&3JU8h$qvHPl|?dr*1w4l>s5-&5w)naPU*8_KXM9g1Ry$y0_~y*wDCDA}>UIaX(3N$f&nCcU?s~J!=D?>l}=fV{Q#qz zrexuT&i8we4X=#ehB{xQ03jarojZzOmRyHO@sTp}jtawKid3((C}kJV=Nweo%0gj6 zhUSYvUS@+zyMf|p)#5vLV6S{+bg_=Il?z!B*Wq}@$?3cH={-_OqDVYFB(of-uyIAv zmdmVXBzZ-S`laV6PfkI=Ob|fV&|A|Bqt}(xaK#R;wS{p;%98CAA8PM0T9%}D7^o}6 zG@hk09@$?k{`1B=e5R_PYeJgb*a2+JPqw<{yMb>}$SKOL0kcVia`c9;HJ{FS2*hkY zARs`|LJh~2ztEqVS14IAfVG&-WB)@iDLZZVL9}Z*%6^4|Uo2ws)NmCH+C_}M4!wIVGP0rdq#M0d zl`+syuEj9AIAJL2az$mMo^9w~=r=In#w{I4u6qhU8A~c|XBL}tf)IS$W>i)Yw>&Kh z!JCG^2KOvfE zD2ohx@_IaBL?C+)Z9jl!6a?|yR==)+lum4k<l#n-4U{dT9dppu zvkZeiGFJc+y&$rqJQ(&GhDU%!HM#0k4>F*`>!=AH+LDuKgDmIT{Pp0~#wDUAa%0^s z3o8DA*U|_yQFkxTEQpm~BxyJd+$o~2Q zhZBrwe2=@ndx-}J?}9Q%C|l`q+o3FL42i+i)|%@e5LE^LTf-n;3Y}RNvhUFegvt(c zw5*gxE`iK)S-j8vnO4&e?4Oz-+C}(==dbdow>EJOOZmh@39oV#ffVFT zIVHmoqg0)7MXPV2O+xG1jQKNRZ(Y80Yv_V_m^RIMu;yD-^PsRqjkr!2Yy1O9+q|AQ zF=W8{D>u|Jo$HFjoh8}fgQY%fu|~H|C82zbMEjeGY$jDpU8)iLIo=fCw9Pgv<0ZM% zDP^=X<5uSr26jNmtE<^xhij&2?>lnnc^oWQRfw$poMQq1}U!Nq0c^!4-l!?OS$g?Evy zrTffo@GB~3@V~aZ3ww%s(^!sG@34mDdoIkybkquIi(yQgyfPFua4nYW%dq$pl^Gs3 zn?4Kxh50xqa}HK9{7(h2b+qSi{3ow~<@%+9H5j02x`39M>>`*U*tb?a(M=#5$4S6m zzp({91gs3vyjVt20AIC}H_R%2W)lV+hkb$?p?-;5K`mrZ9RPB_Fh! zA!zy70HZ1Z?DED&#Y9Y2;7k`;K|U6H+5&N=H;44T;S+?L`Q{N}yG>FWqP-X_$#{tO z0~Te#j;B30?QiZA-&$>JA-pZOCU&Q&uSWL{qS3jz-(Z8#WKCK~?}m)vFR^w-Kwx)b z%A}I?G1NW#;D;{`B)&mZ5O8*ea|6JH01QP^~m6i@8& zF!oYUW3-c9m(M_PAkl3?||rAP|0fetkIhK*oz|%_w1< z>yOxMsBiNeC)=^cjHJEm_pU&pT3S%_R@+e`Ag-VLfu~5W8M%D6Oly@MvLC8eYNSCp zK&4qSgwvVP0~voSJd5msOhjCs8`^h>{yDPVhtUIgO&x8?(Le;ZB{(Ct)-HM2&+iKxjeOVjZAy_t?U-M~0-b`;p$k^b^`L9;6Y8T6#(>=Fl`~2+6#%3^^08$tbF)0H zlo7<{C$&How43d5x>UY66YXYQ&hFeMSkEcQo6oue4#acXewSaqc*08v`vpjvLeiza zxNfl3QH{KJadh|P+ivLqfA%vDzcT37yS8p5HLTlsUVkpj;I`Wd4CI1}Xe`2lu^`__ z30LbcxL)g?5OT>mgI|s0yLM()^v7bk``IdV+a6J~|A_l4lpmh56XAFS0e`5hD6QpK zW`ooW?5Oclu`GKZO@1B?Bi_A@P3A1;;771njTL2gRrpwRRa1#`_Q zDn3mEG9E54)N>$+G;VRy!BIug0qIQYyN4mdwO6@&cc_K-Wn=C^~d&T-UYt|$nGjRmM!`Ku5ij+f)yufvl$Nt z!-Tpt&OTqco?@%9><2?cUyD8R^h;%CbLIoc1oW5dtE6)J#c(I1LS13U3{~hi;O(#6 z0a#sP$oaYUQB~uMK?Oeo4PoN$+T~m8=X{UbXVtMrQEk7Ku?WR`fmMI*_3~dgvGu;z zJ0O3)6ET)sZL%BT0-Az&N<$ci5=5Nn-ggPX#5=Gc(*-3HXU5u#GQeQQ(Pvtw6<^{+`NdbOOWGBh7%mLwMSlFgP*J8q z8zlb*$c9g?uCe9Oe+At=!&!OlMruyet9! zcO(}=_Nwl;rK0;{Xr}XWnxPTvD>tTe+7kqg_gM7(+--`c(Q7*~J$3`<&3WsRCD0ao z$lzgkdE2w;?|^L;9jHU6nQyYWI{+8y6&^`WJ=uZnuD#e4T}eMC`6)9J#nicF#V;Uf z0IbyyP9D8dSt+wA+bRr}M*pCXvct>MEJ6knXhd4Jw#v6J7ju|C^cdwMkgt!E+pCV~ zn`OaBT{KQDm$q1$`3dCpwEegjF6E1>vetUy@Or`B9nPdJGG*BF)b? z_ka(WaIAg&Qp#ynT>A>_H_*1EgynPS{i;y2t8rmMF*4dOOSP+UH)ws2+^2`VBs24_>a?Vcf7X&k>aosJrCW zi^xaZqVXlJvuK@k4W2Aip&*j&Z5&)G4BljS+)1fHIA?1eP|q(nQ3@ckMTR|l&CwRY zu)gmx>cSc1^=F<=eC+IJCZgksiVSUrPY$bC#9%4Q{A~y?zKYeBEZ!!tu0gsw=BXcxocAlv}Ewc-sM?CIK z00H>27;Ph!eRjLVF2*|x=0qjh94T08=&B5-D?0q0f4a2Y=J7}PAY$yuT;TK*z5^s) zPa^o$`#}cO=!z#f(?xbGNqvee+hGHa9t*LU)lbsyJ$-!;aAjacSaGr7giQAC;56fL zL{KPVB%rY5=#@|twG5j}^%Iup@Y#29*Tlrjmdy=O@dYF-S>!83c~f+#+&Sz51IEoG z+?8W#{xm}8S1t~}>DLH70)Nq3KyPys_0lGX73A>bulikO z2z7`Ywhs-!jeC!ny?u&0me=?Ny-(h=Fp%h5fD6k~{44h)MP?jW+prOv2#(Rc!#LhwJTBILta$ zzgtxovGxe}!BXRK8iE_$6(Eo4nnWbM>39Y{@KbZXfPya>3X~`ef|gq6US2N7`2prSeVeKU@;f44@nzzj7o6MGyr65`*?iC zxqz5Yw?n4aagxk+c2!wO-W*AmQDyu#TcQ=5g^M?KAqK(AU4d}%L|u<156jDa5nSWra+62_?d z4!V@$$u<2)*rqQfw|I0pcqUgYH?T}uY?V|$sFQ*N>I#yt{Vu4#1D*<-dIF$qY7Hdx zd>eo%vqH)zx`eVvcUc%hjka_)N%x{zB%`}p!n-aoaCoa?-nNL6n=M(;A)p3g{kj@B zQ$9PSDAA=EnIrUk8En9V_9yEkt(lML*sbyU0Xk?4QimiQd3EI`gL9vwW`iE}_|V%R zl1G3@<^cZkIE?{<%%_u=%sdmC@W6rML&IL1?e$>3Co_b1#2s28-p@N}DcIjOF6v;S z-)OD$E(cK=E=RL36Rsrl0OIVh(X)KoAT>YjFL) z9=P>Z`y_w{zWFn&q~?ddBJx!`XAwBLOEAB8=fAQR%GWu;PC375%EH%C>%TLg+JNC?U1l7``V z*-KWnyfhs@c=qJLBsbD?ArtVhbuwA$hP|iOOdPYEB_#U3mJA)*Y?MF2XlKA;rzIr+oTIShNpcMcN&0S!+>)V^Ody`h`qCwWG<5jonN{JtmNZubF_f5cp zj4=&O+bfE?#9zv(qhebuE7D`HMFs$u1?pjrHVoY)AD!JI-b&I0Japi;j{X8h$QoVb zeJlhf7e;}TL~f&^@N2(1g&e<4&_!Xn?WAYjafI#AzgbLGzf0T9?goQQ6ig* z`{R4b&c~A;i93yT#aw9^dpfFxhzKkCMC>u>qB2RAo;QoNHSl7pyuo)%(@Ax0`}GDm z|1j7G#^Be{KD&{;dfk!zD|L!^S#p|0^)(#z#ckrLGCw`0ykH*Q$g+iaEy3D+>o^2a z_goWcG8|3!4bmM&5``?l+)LJiLLb2*Ah(FJ>nfN=wl2kNoD?;!t_BeXhmon-CT5N( zg25NvsW+FmP*bm>P7(4qPD#=P-#uZ%%XX-$krn&tC}Swqg%E5u5ycRVKkJ7;VP;!C zX4$BEXeVCB5p};KWkRmyIK=@_`MxaM?I-oiYPo&Ccq?V8a`F2ILk|t(^eGjUrBmng zhgq&1Avq*LJBF&m*{2YUrD|kemQbw>f5v5iSw&h@Vcr`#CYT{?g>Z7FKy@E01T=o=%}4+JEsqGA9eK;wYYX~((gUhE(4e`=31QYf0$?}4uH5<=S4f}0%tpsT zd(%&4CbRTRYhw_h88H6yz9py-&`wvPVzM{s8%)C?v#P}CfE!WYJs;D&%@bW9(cxjW z9FxpCDsK-xgLrf&X`Re%39X_+C1Z+AsQfp&ssd8R&O=aT4A!KKET@5lzXY^)8sU9x zYr%Up2tm+X=N=IZI%CI|blG2^pp`_VZi?v6t{7W0y*p-FKu)v4e&f~CBNle!{bzB8 zs?M(YFSi$n`9?f;*$9h~ODDNcRVQWAs^%A@6qM!3x$v{s*w4$ARfzs$9Jof1m3_~| z4p_{{UZD+om)UzSRdFA6K> z+E5b?_Qt)6NZ2O#ZqvL?mu~a>=Te)##lByb)R*u@6QGrzX~uV{pb39CT-J`7lL}T~ z*k>)$Bg-+j>CTV*@qyZ+hCP;=M$LBsRtwk2;%}}yJ8$@oIhP7C@~eT*`)ba#>0?=` zIK35r`G>+nYs;e=H_v1h!)|?fSr9P*>ZTw7L}Ya!irnGfLTwHUq;RYaf5xo0=|=|a z{*DBwzSuTmvRl?O5sM0%e=(`Oqss>Yv`K|~oOpPsW5BJ#WOjYW#;Ho1u4#_Bj;3!6 z9_3A?B~xcQLQh5+>)Y^O3RLSSq{jZk+~0u$t7nE6o=MyIOd4?#F4zh-K=QUxI++=q z*MP|t8V=|MNr`v&c^N#dF=^2!@`m%x>_Ow7WY~kQZjvjwXoxMrYSx7%Qu(x0fas>k zR0_gBw4}e(f~xt0N%6YM4)f!u5WGl2)UAvVx5iod3b?waU5E@w$3p*zmof%MJ`XLSk|~c zB`u3{v}Bbn@-hL7mAr@A;0|hCH5w;3a;S^W1}PxU8v%v78_VdVt^R<#8YJiFUDEHq zNbQ(Rfu2}wg~Q6e&D_2sN#e@7NY|?%5gDL{hTd<`xgIsrL@L~vaZD>IGRTtL$0oPa zzcGx%+1HK0liXYFz?p=sYUiasKg9GoV2PE63dT)$*Yny)ig_BhjKc0-2)jM&3c&38 zvhbho&F3JFGfRE?@Fse9)gx!ZkZ@w9R*N4hsCwR))T?OebPtEueWdRzdu{9#(HIAa zNJkub00}7rQWghVg`MCXx!~S9so?Odb0tlr9pcOX+Tq!I7jT`A2JJ#b? zl%RPxiJb8D^tAz7Z97~qa-oGroC_EZKx!5~tZHWPib&M!VAxAt|3Rli1GC-Rb6X}f zUL9nC7`Fg7rV4r=t-NY}{%)FSwvQ_ebmX?rGPb?f>?6w2q(B_2)`Lpa8mG516=TN? zzshBe^im(&t5Z>6MgVCBmUY_aYGkb^Z($d`=EX=H+Z(+f^z>kJ{n>e^f7)cbUalA8(`!5vh$OYkvfL3>pq-XC> zJkpxSNS0zyhdcOEtRBg#)QsQbX=4N?yy}H?&_(c6uWC^v`8iD3YMr~?s=;_$% zL=Ge;8;hGMKxt<(NS>~@nuC5y-7nb{%W}9ukJ&P9%*{{-GHy$`Z%t!)+OKEpq4oI> zcyc`y&1C7FIk&@6if>~2-Fw#DU0!{||47Ht^0ZFywc&ETy3xF$jd>J-cuUqj#&UpD zmzj$rbC22m>jFTMa?t(@;>Dp8=GV|pp(+9e#RtcUpTR-*FngX~1p-WHNP)j0AHgr6 zaZW?b7S)u83$0pm^<}t-%}*c~3^aF&D3dGmKsTC&WQoTqM1o)oKG&f7lmh9@kD79f z@U95{YOKIG8KOV@^Cqxm?FqZ9kyfM)N|pvIw*iK_8stClv~YN01(yFHQf8tK@+<`F zs5%HkKtWG;azN+j55h7U5EY%4BH$xLB~K(!*k@1Is{v#yNk+J zFs`VQSDg?xrKGu)(#hstx6234wcrO6o?9jzp0|C@hB59#0MdRSClwwdDtgF^t|x4^ z7JsIY_T*SNeQbfPP#YK$|~-Sm&* zap#t?!Y?Mubfep)Fw9!0%Nh1~GXO!1*wS}YOe&IC!Njrl1m>jrK>5bS6?e=U8ZX#b zu=sMlXl|wEV`}=7?PAJ<{dS26*xQ~f=)}f_3hy@NyamBC&`SMSd396EdCT#gHJmTs zm`-{<5nU+rzzfBd#qQ&2)@R>!FR9(~u1CtRS}n89p%vg9p`A2v>f7&%_)sS&fqoD4 zPg!}x9jLm;rrWoidHmLDJtMYzI|bjUZa@faH1ni zte1}8qH5hGju-EmY~Sd1g}n_V_mtukp~CAHSF8mNWL zP)7am)T+44aULNBnOjwA5ct1_Ccd$*K9B}Fb)a^qgFoF))-ai>d?=6LA1y+SX105_ zvY>8eP|)lw>W>Kx)66HB6UikN8<))^nOwU?jfg-#F)mFwsbH3~H=8>MCx zrm+5^;XU2zpRF&hqoA@rE?WAR>)@nyWy7(Db%Urt zc+y)b*Rb|ffdbRlFcb=^nw|B6-h2))^8R)o7bDSkT&`oo?HX&R%IO@I#G{BKx(kv3 zg=q|C#ZDcFN`=Qi2xj#&*@VD%Tu;@BN04Sc{gd7uy8G@5d0kc;^9md4Z}zKo8!}+o z9oi!&!vdjR&q$3K8qxP9HMhif=Ph6-+T_#(J|l0?O*GjSKsRj&fzWLSkQ|Y(fIk%% z+36jLQ))%_HRv&BC)tD=LJ&{&89!9VCv%Mp`FRd{NF2fEwK))BC2Jn24BLHol*bPn;V$2oZkZKEAM!bk5W%I3Pl|FRb z2LLc!A)4Zi&=y%Su5w7U0;w^=vQA)?@)$AY5iE;}yOS~M^aE7AZA!1p4lfOx&6v)q|JLcw`P45r+ z3W}S&Hijse%s2Q2cdhLrIhX$Wgk}+|;9DJwp2peb>lnE_VQvPfYY)i6V1Mw7ONr0o z896ylU;>4VDKJz)!weC?`MkOp=gGctrbI$o|GQr<#v5#?*Gt`@2Bz1`M^3n|=tiTY z^ab~gwUE2zz*L_jSuMq)UhlIbe7*2EoJA!WTNzP}@P{eZDpQeOk1lBJ%ARB*0Iov# zwdrTzC=BSFFIbTq=U=q!3~L^Mj0Fwdmbe_`6ujCxi4ROg@Yeg~&x0n^r(ka8(tVZp ziaJqMs0f(XqWKG#_x!ijHEvKhI>GILt#Sg!r`aM~K-QN7gr*+&lh?YKpSG!|M zMw|2>`w#pqd?qZ@eA)F?PVaB-Fn`pO=MlmfqpW**0m?R0)BJW}u&yh)|FuaFU&>zE z!%SM*gq6RcfkcM?ZZBXe*kwU6VS^SW+Fl|*oE?aAZ;8yZ!eQRA>xD;*q1W#yr#NDmkr$|#@xpOR3ljmrmPyN?I~|Alaz5-qyv^^b=y_{z#cJz?7UCP54>Q9in(l>#XeGNynft)FrGL!j3* z{uuTxL#U$4u7cUCaeaJppb*+oo=dvZ?9!kto$?i{gw90ng^2zq_d&vl46>~laqcvm zwY0>CdsS6Hbofb-#!DUP6IN2U)BuHt{|wx2YN93iN&IvYS8JEY`oJ-7wRNH_67&tQ zutaRZzfEaDJv6ps4gYy%e&rR+Jx?#hJ+s*sc}ubJnEhSnW!)$2j<-$}#9p#B7AEIy zdUW%IQv|DhZ>UWyxH`zYId=}sx%owPZNr&)rxwZK<7t~C1WH$vcQGAaIO9av`~8yd z2f;mYqafR0*J#0CzCh}jEoWam=rroUUo9Actp9?Ot~Z$?8z*^A>T-5PFfCmj9n zBZ6X7AdUp578+pxn)g7i zYl^%)b?af^yTxC{OR21tUrp=I?9#lb7oMvyu4BHF)?51Losrdhsg5pL`1;>Q6Y)0V zvg3BmdnI=9l;L=ZHgIRUeC>2i+R&U>@#c%QZfs{mKdPRoER>#G|N z72H@JJru&|M#BS)05&53a$L+LM7*iry7=_aXvcr8U&YKvXWM~Ho-vTew5$4=;TS21 zB$A5JDu^E(3WCXuJu*z9geC#8W(73!i;Pglp{*vMtv`@=CCPi?bgGll__MokP)FFg z1)|AG=7P+S`|ER;64lsHuP|f+DK!_+&)YQyTUvZ|Vosw3zO;ztBxwkv$1;RR4_QQS z6041>pQ&y!R^O!k6_Ui&jC}-xro~$}L*bX0=7jKF3?VM5h~<^4$ktEBd94b!CjRJ5 zethXHOg-Wr>P-ng42+5kP^YZR%H^4 zzt`+1ACfR-UWom?*Lq>zPb2F5AYzGLk>^~6xirH2f{bMyduFmQbkGG#n285c;n%r3 zx{_K}<}K7oOIe@R7=!83+j^yC8r*-OTA#e@9`>x?EZA?L*C6d##t%Pix_e#cZ>{UYgEd+Wf7(f=Yh#ZN_PSzg|rniXxVqmVjQ z8SfLVe=0;*7W-AFV=0c0+%e(uGf_)Y5NR}VDEbpvD@Bu-UO zOHggJ&x^1BcW%!`h`x(|eiB|Sy?j0LssRX2+{0Im8(KBJn}s<0lmFfhwi+G=0i=x; zs#d>+2yUS$G4W6kAs`i@*0?bc(GT-$Ljg$yB)>Q$#5RC`^2Wn zxHgm)3;BNqe$AmTAyrG=+=)-CB;%B=FY`lx`wF?BD-f11E2~$NO4h9h+_l9a$Ba66 zU~`$A8`-H`Vj;9Ks#$GQtR?psv$Qe>~qs6szM= z{t`HDlM=%SJ^5*I9ht+7nEEW$rp>OA4pF(*1?z?qxi@F*=0#m|Hk3Cw_$+ z49Rqd(->fa8TQ%GuJ@@g#kG(fFmoV$z*M&%awvFNCYr64hGi$nDW@liOj)}Mo?rbL{{508+@%QX#hz3 z;t&3P+yEu$Aw~exVYr@7#gc77oM~A~c3f;B_(+O+V-$0b*n4Jhd;4wDg^26p`*N8Z zPJG(_d8VkY#-h7nuJXjq{L7FzJzYdD*7=A_Da|oqt+SRf{p7CPK)&ASL&88Dj>P`Z z=5+ypH6KnE7a^M4CX6B7x+Rn3fp_vTfS|7rf>%Bf@iwt)xM_eu4a(?iThW+qQPs4b zxWxg5ODJ<#aqS>KrTwZhu5@q%CO{dTi?YN(E&z62Pd8oBhlWYJ4Df|qMkn{3O6yUA zjR&o$Y7!Kd?Pm86rH)lQ`-J;W4Kip}pK02ya zZ>##tqpo;>$CZ5~>BLM9K(}xkGwdqAJ^dJ&u7U6M+&&@jLx{(KsHLg4t<5IemHj>O z?$KU8_<>M0y7og86^QF<%DDGK>mM)mbPd+eV6TB;`jrII8k`_kVikRuT=x*Qv|BaP zqg%R!gEZH(D^7+L|sQ~a$B0d%MtCmB$-6q^7=kU^^0jDENH9i-X$jJlBM1^RI z45U|evsK!n<4Im*=Bq(7 z>N7@}y{Lsx$SE7Yo`9l~98*SUqx|Q0Y;@b)C`y}`k&V>nBNCmKNel5)sjgX^_lPtk zLYTEnfaHr@c({Goid#8pZ#oX4-zY|1Aa?!r@O#EmcEFtJ#AI`cOTSRlHRFXmPtOg$=O|^6#b)z&=4QwtZs!Co{)m$)CJsP4s6DZZU+6f^E~y*z1}$E#SZ*&h1Y$d~pPoyF)>Cn^ooJ7C=C1MMTA$r&=BOVU*{bZ1oeaXo zkyGnCU-3YV?M;W%DBaJaq<&1$gc1EBkh(3*t_fzgXo2Ny6jx9LlSwMvxd^vv{!txt zy;9vIxE@>&FHO#K3zH0RL4lo|uDXYsNJmU#CR42h&Hah>7grVyp3A2v&|#wA+baiQ zvyFC7H5`uKyT+p35mA&-cEC%ZG|fay%innc+^pX7IjG##yaFEvlq0}ua5b&cnI~QQ z(r!O$e^~~Y$80Zg9I5GRK(uW9^!%DK?JT+S(yfJDdE?YS$-oxM-vib)CvEZdmG0G;frh79tP2x zVm%OaRR~Gs!)s!$EuvS`h*};(+^; z=2&WIX4diOM2D=sciZ*tt3xW*f&aC48J8#gK$_NXh}D+^IO2iQ@dI1O|2j%KK>V`l zzzjpgSHv>DXu&?cT=Ug>yKQL(wPsoB+1P7H*rxOyrxZP3FL4@pdJ^N90h%{mN8c zr1A{cYbMK+GiVRag(-FuXzOEWM%tt1fj@AXc3GQ)@qM<=R5rb{KDf!sZK>kGxafey ziaO!C?jJ9mJK1Eh*^TZK3TgH@>iOa{j0SP*G-n4Da;aOa;y9SreAO&S*aq-7VWf3J zihJv^0Yyx0X_1$%@T|y%oKU-Az8qk|6L?!lj(Azs0EupmwU*=nxtf6Qa8=qL@9CST z8^`=z-y|5TrO*Ur5zlk&-9OtOE3BXp;VfgoSlnng7HqwbR~-dDE_4n7#TE?f9B|*- zkR0B#6&G}xjBW+5ZErXx$4T`vO|(7ol{v(${{;t%?F@e|Cm2I9r*zTFkev@Fwk!tT zt=naKESuUeB@bE}0Ib?-xz+nnY;n|p#Nb>F>Gv%n#*0+R*FD*|1xMJi6Wuq!lg~T& zYwT=_#fD)Fet<_gSsCa;SU?k&Ztg&4J1m<)0B3(`D2i_R)vV*IVSI;Y9CLPo&y6>x zmg@m&S$j7xjw)H_6H@1@^1l3r`pEtYZxkZn?^$jh+z3l}X}Pr6QlU`VP&s3Hu6X@) z12%d^ry#Fo424l-4-ZT;D+Dh8H3|^AM!!)ffg!&O2kl8yoIMP|*5CuZKrpgvXiaF$EV=5B<8ga`b+FV(p zIa|DL#g*>L)B#GcKDjm8^~B??Fg=-OPVKg5HQ?FSNxyo7--V$q8h(Kc9hB%Y%M>w zIXUW`tLJAhp}Djxxp6|7i{GBeP_+xj+}7x)yb1@fkv{UZHkFPkRod1oRfQ*IPG9Q) z(|EoNKxsu&yNVHFz)et3G+`6y{AM1U0l9HI7D#pPQ{-Q4C7N6ZmE0F;dLg#8p?kj) zzMGIk=hDY?v&AUh0uL#9n~oUfI@9g+lNLVMXkfnyhZ;szN|!Lq=q*Ja_lS;VNaVmQ zX)aQXwWhU^(h^3CzV%)Rc%+H-XCQ9Dm0E^TOYRig+IMAC>Az?i#-fA}n-hnXvXVMC z4C-pZujcbT0+VxX8ikGeO%_t>{&yN)LnCKFyqlgNe+0Q*9v1mL5Hh;rJ0LJpq?miy z4-C*{0XSHMn=OBt5Q2wqfTsT6B1<8x)jV`!k{tPhre0umN9_^<0jWtU#PY;zS zV%tl2I88-!>y%$xfoG)%O}Yut&TSC*D?iQU^r+mAxp zuLlHQ__^)|Bw+sC*SNm^t{l{iBBE<_^AcI;cyKOUb?G(0DcN#UFU+>d;XV1gzyq|X zP)M&9`s$6{#0UireG{wjptx783`Zew@Tim)t_Vj4bMN!I6ou&qW$C05#~dh=-dXSO zFskZWIzFPB#v-b0*m%9o+^gyyeKZqC>iB#+fxO2XuR>?MK3sy@f0+$gl(oxJ*))*Y z@XTZo+iUC!N6F@BF{1V$w!NNtA?uqkD_@b>q2)R(U1D%MgPbDZl#hFuf0V(O7} zcqj;S5#kq+c)L}LogX7WSG)T3wTTvw>`t)@3020WQHv^Uga@5&@*Gqw)-e-WM&W-! zBRKv)(Fl2AQE3TTDgg&`eJg3D|3)I{|LtdGWcjc0A0UF2g@ySa;qV_Mg7KgB@P8o@ z|26#&67g@<|0+aqF#S&;g601;Az1&13GrX^{|^&_fsKKc{XZrI8x!+?lMq+)+ZPG| z$^GYoIZl@e@Y>AUru(iw{Bo+^?QuwGnpA%2nLb_5|-0z(-m1i?ydNy(C z=QOgK90jZmrHtL(Lp9S)U;bmKsp%-cRd%{LM7>SX1d&mw2h|UB+~*Is+|TIW3HY|d0Sm4}3JyMKP4 zM9mZY+Oy6jv&V*W**A2eBA>%x!TDWp%%06v1(vQ>Pv?XUADGJd1=2w92+ZKJ@++3L ziR=*4;)e+!aRq@g>kRvqdd33; zO4NEx(Yx`dBLd<#JO=%-Kd_%C8JF#3xLZrthATKT$T`Fq{B4Rnnxnr5ZS=p&j4kM6;ZJ|p-d>w;us(lU8Qvxw)RQOy)r zQXc*!ra-;CowA>xPyxSuu4kWv-nO`>XPfC|ka)7_(yUy==!z>7316v|=hV)cZjiM;F4~kY^>7~gX&v31 z?Ar5KCXIj_Phk`5__ZeJxr5w$<3y}*K64sum-WSR+M?nY5b;D6Y(3@m!2F`KdYXe1!ISXQoh!q$-DVCb1W%Eir;h8iGeuMH6uQ#v%9PfNR9`@c;8Zp zwR2o%vi@k=)TsMohI@5WhMJ9Ri@m0y=rv!vGvVH=B7er?4!VtlsC;{sFJJoxJ??@S zFrumi=fEZ(EvcX+sRKMx9!jY>toTix?Xal+R!zoo)}%YF(#){^4_>*Jp6my1c?I+R zm}l|18b1=qM;7~QN_4NZPqL0WB*)Y*%3lmfPV0S@CqzNldB-L#Ei&p#pbw)t@^M*+ zd_a#KT5U!&B)+}XL)d=sgkNE?`6)}iI`A)=o`NlFl63VKj320^c$*szvsK3wb+ec5 ztHwcCdkcswO=Lp%Y^HGxeMMBg`g+}l!$e?4C?YqLP+4N;{_Wkvqc~I!)ggO& z-NSDmt28(WX;k<;6+&KMRvpSto@Tczf|D8a!m7#r^B+ zYGUPIuzR*^CGuTL^jBmexaR{NkJM9Kd+@_IJlMqjrnJg?esbC!1($MLf^=?7K4r0ZpIk2`)$`=at4gfPOm1nq|3DAgg~4Kp8g zbxqQ4(W$q^Hyx53lT)n|QMCD!pw~BSDa$(4ORXAbbt>&lnEkK%6n>k3xQs8Jlbb!r z)W3byqs$?@Iv+PT^3{>vY=WbIkG3Gs?iVc92aGI6Btt;e>w@-U8B?3h-mq6 zKc=DKE8)F%YLSt|D@4*>aiY}uk>wfKy6Bi#c9B>HIl1Q?ZI6vcY~O8lX&b<7Q2K$O zBq#myTZ~UW-jpR7peYLq5brW_aecM3g)5S*a(~|Bu2vtFYFt@TlXHF8C5+N1;4Ssk z4U)cF0lIE2C#Ir@y3fxo1R{fCPRfjAW_G=0R~`};sf1}0KGZy!vvN!#OAtw?NidA& zG-!DxGeUJc<@(zWi5z8Dqym;Rs|T66r^-VNwkTfH#-!Af(Z1D1LvQD~;8bHA z;!TEM`~^W5S(s-{dAiuNr^0(@Mz(>0>nn@@Fhf?J!u);SZD_-}sGTCw(sAu2Nuc2j`+HmhX9yvC?>IbUn|DhFiDZ^ucBVM-p;(u8sHvcG z4@54Aj5U7F9bBJL86UOU%v`O@l@&V~SNItyvFy*UxG{cRX`lvNFP=@zJ5QN6!=G6D z^IpM~k}V#2malKtVB0xy&*@KH&6mT8O1+#O5;o+J-C%3a=RX0}A$0oUJ!`OxM0;IZN z{liwYjsJsO)2CBws;9Q2ymncrVByKRCuLFkH{z-mKXKIM+XnI5iFD`IFj9_ck$=Ty zxVQ_FPt7_-mi3?ef$*A-UK7^-T=aE0H59csD-+MRhn?1kgtmt0foeIkl9nsKu~@oM z$5)f+RD7_gs@qYvR}mpkvx(9_@5SL|Uz>)iJQ zv##fv?wE+DpyWH%4nCWHukhI^{F40SP^_{?f|d?>_g0~d;lyG3#I5cF-W1lDdjj>E zj4zGe-E)uOw`->J0E9QT{<;ow`fN9e6@!t z98*ap-}lz8=as5AWIFqn7iqR8BoL%G_oMI6G_~R`YKkh<1n=1s%SNWD+Zd}OE=Aw8 z2yRI8P1LqWJ$c7K#O_taEin^!B<*s*g-(WfRttB$KkDr7-3%|Ry~36^U9kNiG{x^2 z!6KJA;kS*=x0S(|`~>b!kd}&wWng?Ha?OR*_?La zd=S%+bS-)-skY~yxhQV6!XS|Sal}0e?fbbRRaxr!UNxf@d}W0*mO`Q2<>f6Bo>4~U zyG-Vnh>yO@R!wK=(k3ezywEvlKICxg7VEYp^JBD!U&YLapXTp$KdAokMwffVll*0{ z>E3zxb)UV+CDoAU`(E@ZsnOE)kNViz0xc}1cJ!qNKFuQdkBSsqC=uGkxmPIJm}Kp% zRo)f?6~_+Pq+SU}>F#{xP0? zK@pwk88NElR|yAERT|6LOuRC6*{18ICSJXqNCl-!XTu#kIDdRMEBh{;_u^G&Tkia4 zEF&ZP+A6bGKYh!B8h#I(h}2dit(>LbVx26&heDOZ9}a%r&E&*U5Q`AvSHaLUoZ1s& zzeTf7RfLbxrS$K1{kowI{a+5okMuo+XsZ<9A8@3$z>k%G3Y^K2xcf5NGY^+^IE3)% z(_OML%2*-I$!a&zBuk5>XZ$44BDLkDtShYzhoQD0Xp(N*FD2v}zHC-hABVNKQ@+aa zFlw8)bl2u%P-U~#6@uj9G=9uu$Ack)IVr`o+-n<1OkQnQp(4|_ZrW%&{k@Hp&}sN$ zvrD42D%I)+A{s+porNU0D#M&`XQ(13Cbx-yD!JR_Ncob?n}yW5wQT>k>kQsqJ`^LX zhAC9ZL<~Xhk8b^Ry+-%oFo(3wzp=>a+9fmG`l8&?ETPd!1pkreA!u#4Zq!9x@Tz*< z&3&Z`y>z2eIZ^|MZ8Ar$nNro@wXs@<)WU71(Mu8Fy~?znWK?*w=<)2P%rylh3(-Y* zzyeg+w^XCzN-&~tCsEoz=Z8PX_r~l(yqJ4$@RO`SnoBB7Yx36!#oMJPcu z<>wP_(6Zy1-N2;ICOfu&V?s39$J;ca<&)am+eaCi^WHHmQz^dBZtEGBY8G5p067c zgSTK&p8j-I@k(4s2Z~n<={aZ@+v^lC=zSoMVeFze`G-z17cu@u7o>uFjAKL4CDI-CByGRga(#AlJxT~BIM1gtE z85AHf4VerfxMW=ZSrJRjBwSr8|3=d}h_>X-WT-`Xy4RyApXn#5Hpu(-)|>m(${%MJ z$4usff|VqYG49zi?H(J6^)#z=Y-5VpY)_#PULwjX;zI#alP9lo#-8Xg$@I%bnmO)H zi5ox8XEe@BD$8Jtx$;5iwJ@X+YA#7#JkNd7QmUvN+~&nmI%4c*MDt)XtG}l%%CU$fNpd5; z;*4`Tl3CaIavovsdAN{orqc@(hFYk=L-N)dGjCN03{_dDqsbRc@zd7AbV0{ZW?Tihf3O+1oE6!nfe- zv@DXz%#k?<9EIn+@$%rMNBaF&Kis*CyGV80cPPo&yA1TGJ(6(3Es_owyvDEUHGaAGi4`mw=JIu*A)~wBNh1eV+8FwYTb)ZA zU+FeNMHa6TdK0T!^2F%ob9tP^3oa7{51p*Z#T&N7o=O!&Cb{9?oUZpO9PsU~Q;mt7 zp5NMOs2ZLi;+@5gvRjDDo2hXm`DollNvMoM-$8FR_e)GQ7U3EV+MTDV+T# z&txj1gC^{zN_?<`)-`*unKQxD4Q7|SC6mMtTan&w0Svs)&3wpRrT$BkaP8D-gH1NJK3Y=je-s}Rn)!fyE*I~Pa!rPB-s;0 zAA3-#N27$YeQcY>NW5f96OjO&_?_?FDRz~JL>Dgo?}U;~gG^paZKISt_rF{S>e`v$ z19LW|G%j3w?hh&NT-swFRx0I5r}Qfzz$r#u2^UBrxTpPr=K$ zn8+ZJyE*lC{q&C(q(vm3xgY)54ymHEF;ecSn3|bp3AXbZ5X4&^auv`Oud`^p9?_HT z^}8-bxfG<&x?M>E;p*jlKlo*?w3`~A-+N4BwQ5*m@9q6bMa_2K&SA&ehl${19}~5o zneO&OKeGfTFx4x%6q;FuZ(blhf$5%{d+c}1;T7GdO|}^g5Q;@&hc_0+x+94|zrb_t zUX{)x=8bqwAQ9$&W9`Z450X26FKWFXUY>+W#KhhSBMS67K8)PLTo9XUOY30Bo%RCv z&p>_%6YZzj^|TBXnV6Cy7Rj6H4YW@bo@P#z6LEPDWEf?!eQ(U|Gw;33ta;+uwU7_f zR?T8?*!JHh0?YfEY1t%k$oK99zhfI)S+LQxki$afg+Mo4zbn!DTKAbz=3vUkzQ5R1tu;x8?xEEqy$8twE5_kj7BhG3}TJH^^20Ua0xkEYom+bix>0D zZ+h7YCD<~NFdqlYj&vVz%tVBhOp5=cR=9eD^2p9+ul~VU;NG36H}XT36-FZtb@w+? z4r^HwGa)5wMia=MtGmoJo8^~dy$2KI^O~}gg_ms%31sx6WPgr&oTA2XbRJU&RLzdv zudUnV7Z-kj>72*98adQHYhvdrmwYwBa>J7Z{SGQdLC<&u@p_6&p1m?z@mA9)Mk`mN z6S1)@8GjG0xHs@nmHmd}6+v^O#QDbb!3Yj(bq19Vz1L z8w4XYE}g*V7T&&$n7_S`F?Gz$xL0dms8T4Hj@Rg;J62q;yDky@1?9G}I{&P}3}zyFR7x$k^sAQSle1cXw=| zA4%r`9W=`M9-|cqBX5_8dnB%JANG^`qsd#UTPj(^?4I01az(oYm-%9dk7Zn{@87}< zFim4t1%SRebS+Vsl^9fiEmL{4kECrZP&grSQYx3N&B$z#k{nG z;|!dwQ}Jbbr3uqio}K=sm?pJ1O>}tc>fEpWC=8=*L)TcKcjj zpqjX(QB-_)us8sDr4XZe{YeQdP;d1RQz**5y37M9Xo#Cj!8oopsFfGPyY#RhaUoMQ zJcjeIHrx1Y?j7#JMl6**-i3XYI*WT7FyHgw)q?VIbe8ubO=P6w^Ui<Ex z9bX@r8nN*t-DfMtv)^V;ste>SUve@y6)&2)DiwDW7~2dsy&nTwY71qHhDqiVq!k}G zAzCOE30Wy$>%9yyhkgEJu@l>~X|(7^hO%9=Z=`oHs1`#7v-eyZlXy8t8W!;27W$eY z#i7KujkbtB&1rIN&B)RxCN&Q5r=XMQ3HMAy!z+z$I*dWlKHt zWua2_f?4t)IW>wrtihJ_X9FQUA;vk⪻A-48&HDpZ#Sw^Q_W~T9Xu9s|Hyu)k!vZ zr0B~XN<0&MYZ_uP!V1--6FDD*jLO6fJeqG!>FV!Ryo2c#?fdw?ZfUoRo?9r^W0WlL zNZnqS>ZM(2d1A?uC@>-xN~y4EM_M2nIj6xXx*R0{JMEj1;!oKBz|b~3dq+zBIU%b7 zeTSE~RKx%%VRNeOvH7gDaxIg}0J)~OnYD=rRJ2c#+E@I?n)o|)D~`8?46XNn14V;(?iNiO*h7!-G2~(sne|#{PEd zdSX6ZE*<-~E03+!Jt_%elUrAX??wzO|Bw)@ePXWKNFzvbjuk4roAV7na640ZsqgXm zeu_TH;%}i&6p)oSGGL+1&eGd)vN?rQ-JiKTib)4`w4-sK)^3q|vdzrb_`WxM=0MB( za<%S$6~hH`R(!RGP}%THRLSMjVQe~I>Ip+5{S2{%EhWmv+gct8Z_cUIhDtnQ3H>&9~UyJ5Q&N*){R z)wnKLrl7V0^mpmfmdYpjuGpLuGQE38rOaX3o9*Jc^j&$y@$IFo6D>k9OSwJVO*8`KsNHi6qEe9mY~}*l)E(T zt-E1fnPBx3NFz_HG1owY5nVubtYv%akIoZERZAWX?PTAMMUcfu@u`14$`$4L+e&FsmGgS>MbF!dOah>IRx2<>7a!6K`rqQG)S z;4bQJ?_>|C0dlvub8r!Lm*D)hL==F}&|pr`FA|)s1gC+j1_x))Axun5cop*gFCMC-_gh{|o8>vHIUF2PXb7 z9Rxt4s*aWzD-Ss{99n`C27yBPAtJz^4iqX1fr~;B{1BKZ1Ok`{kjerXghT&dq>|!) z(>h{xfG|t`WgY0>!sm2mG2o7~ScrpvUm*@Yi^0D+;lJt@Rn`BuW9;qEvenE^|6%|wE&f*136Hh=mF|`nV6+|jOd}T{hQO;KK$aGwR*qPEGay;b zoSf`17G`HT3wxaqn^~hl+WH_Bj0M`k1r3t6#-e`-1wloW@pflvA^-^ZBT9A{$v=Q!?7{yM z2|yNS8RLlkL#j5~`7iO3c9v)t7c|EDHx|E0&RG1t@PA2!Unrn40678vyX{Dlf&NR! ze~;0>dM(hmB{<#AIw=7C*@^$`<*x`hYA5p0YU`CR9O@SgF&qT4iJQt z6$%am)(OH;aNu4s9FPD+^NbAm76QaVH34A|fFaNq{%gE+&T^0og+jrQNLLhGNKgXI z1IUDm*=gCjo*@B!5x@sf3<4Mg2b4hqN2Y}3Woxs;lTI|2h76-*-#KTR13fYvoNR# z0Gx$I8jrI9r1+dgKp!9lRDc7L;7E(J5CNz3zs~5w|4IXeUnf`)SQ}^NU}=W61cCKH zFwoy;bC@s)tObIDz#1TasIVX~qYmQIMq#t=jBA`%{g}tFZO$qSEmrM6wOhZ*j*Akm zJIXvI1$5B`aXnyoe==?wcVysb>1Rr<*MZ_{Rx?q1Pb~!1#7Xz{5hUV2aS*7mFktb2(47sSzy;LV@wW^J5+eAUEn?j ztc3w_{ar2$A_DtOKOk%nq2F;p2_k;CO;8vL|A$!?U9w7sjkptR=EJRuXDfxd>7?XkJ9W1aOPB;+!tWjuzfHHN# XnPG9iiWCYHh6*9b*xBXP70CVv5@&T6 literal 0 HcmV?d00001 diff --git a/car_llvmkot/src/lib/stm32f4d/Makefile b/car_llvmkot/src/lib/stm32f4d/Makefile new file mode 100644 index 00000000000..50f70a5d0ce --- /dev/null +++ b/car_llvmkot/src/lib/stm32f4d/Makefile @@ -0,0 +1,9 @@ +LIB_STM32F4D_OBJ_PREFIX=libstm32f4d_ + +$(LIB_STM32F4D_OBJ): \ + $(BIN_DIR)/$(LIB_STDPRPH_OBJ_PREFIX)stm32f4_discovery.o + $(LD_ALL_DEPS) + +$(BIN_DIR)/$(LIB_STDPRPH_OBJ_PREFIX)%.o: $(LIB_STM32F4D_DIR)/%.c \ + $(LIB_STM32F4D_DIR)/stm32f4_discovery.h + $(CC_ALL_DEPS) diff --git a/car_llvmkot/src/lib/stm32f4d/Release_Notes.html b/car_llvmkot/src/lib/stm32f4d/Release_Notes.html new file mode 100644 index 00000000000..3882ad6501c --- /dev/null +++ b/car_llvmkot/src/lib/stm32f4d/Release_Notes.html @@ -0,0 +1,142 @@ + + + + + + + + + + + + + + + + Release Notes for STM32F4-Discovery Board Drivers + + + + + + + + + + +

    +


    +

    +
    + + + + + + +
    + + + + + + + + + +
    +

    Back to Release page

    +
    +

    Release +Notes for STM32F4-Discovery Board Drivers

    +

    Copyright +2011 STMicroelectronics

    +

    +
    +

     

    + + + + + + +
    +

    Contents

    +
      +
    1. STM32F4-Discovery Board Drivers update History
      2. +
    2. License
      3. +
    + + +

    STM32F4-Discovery Board Drivers update History

    For more information on the STM32F4-Discovery board visit www.st.com/stm32f4-discovery.

    V1.1.0 / 28-October-2011

    +

    Main +Changes

    + +
    • Add PDM audio software decoding Library drivers, used to decode and reconstruct the audio signal produced by MP45DT02 MEMS microphone from STMicroelectronics. For more details about this Library, please refer to document "PDM audio software decoding on STM32 microcontrollers (AN3998)".
    • stm32f4_discovery_audio_codec.c/.h: update to use DMA instead of Interrupt in I2S communication with the external codec.

    V1.0.0 / 19-September-2011

    +

    Main +Changes

    + +
    • First official version of the STM32F4-Discovery Board Drivers

    License

    The use of the PDM audio software decoding Library is governed by the terms and conditions of the License Agreement "MCD-ST Image SW License Agreement 19Jul2011 v0.1.pdf" available in the root of this folder.

    The use of the other STM32F4-Discovery board drivers is governed by the terms and conditions of the License Agreement "MCD-ST Liberty SW License Agreement 20Jul2011 v0.1.pdf" available in the root of this package. 

    + +
    +
    +

    For +complete documentation on STMicroelectronics Microcontrollers visit www.st.com

    +
    +

    +
    +
    +

     

    +
    + + \ No newline at end of file diff --git a/car_llvmkot/src/lib/stm32f4d/libPDMFilter_GCC.a b/car_llvmkot/src/lib/stm32f4d/libPDMFilter_GCC.a new file mode 100644 index 0000000000000000000000000000000000000000..4dcbbca7e515d217387860abdfbb830fb5b1a47a GIT binary patch literal 6956 zcmeHMdrVu`89&$8kLzm##yo)tO$@~;q!gT{jhfa= z8ZBv>76^|Shd`UPYNM`oDz%FGSV)^lQ&px;&9rVB3hf?AaQ^_c>F#2w*>{XDT)a%1 zwm+sx`J}^lzVG{;-*@i0$HyPXNu{>_ecferu6C^$@(slXV{w6@P^;AkLj1p4t)aje z9AKppLQ-g7{;Sr=G_;!?J2!#`lKXTaH;pVz*x ze;;bmqZR{d$wR2m-rL?4$fbJ>KifZh9)n(AR8*wZ78MznA5d$hpRKMp69fT|vn&M4 zK&uu)uSW*_qJn_RK^)FVj z?KNwc^)*|UEzM>$qojL({ox*UF>U^bn?|!`@h277#?56mnopW>Pi)RO5fSL6p8w)D zO2IyXS!ULoivwQVH<@b#eH@!UhUQ;8_I5W)G6sB#4|FH=0vtICoTmc5$Q33R@GR%y z^Wc7?dG`wE{4ru4rTp<&)(OjZhX>yAfBS99b06JeUrIdgYr2%6GJX82^>nS8VXiF^bl^$~R3$Q7SVj#3jHJGzylv+OR{EL%S~%kG_? zWm~+ntbIl@LJkpUqP`krk?RI)eTAGqw_6|B^B%A#h4jq6y-rCi=VpLW3XIZ0KnjIEk!+TA zdLb9YDev!aKCjfb6}*f$+yj|s9s(Y_H~x%*l?}pty^w1Vc6`q$F%1^qZ&qhwl{X)0QFLH-Np0KmEjA-cm9kkhgk(!jb!#q9e z7G`hNmdp1FQkAo8_B1u}idlZveo;Dk^^VKgQzds3ewsnqmjVbWL=!!vpT7J45{eMc z(MuF=>+%cXv zt6#s|X{MG4Dv6D5oQazSWb_M?$yY1yeSh;U!Xt7g+QgnA>lao$L#bznHOAItJ7d$D zle{0@T6_ubXKr8PKI6J~59_sFWSB@Qu6Q^yfvMf~4w2#2w+tX05&~am6iPd8?#P;r= z+>dJ=s8qb`#;^Ej8A_LqNJce|HV0G+P_@{-31g!1nBgR-T1vh;y-o7u>DpLUG9AfE zW?JF9`?+aqRKe1Xb5IrZx5at{zIs8lDs1GrI;aXvN>&1ufe_as)0VccpgO6MwzkEx zbe|HuM^q7QP>Fa&z8XpRxN-`QxYnj*Y1g5)IM0VnB;fE!xvxgPsqGSDX=`nxd^Hpv zkH_M15#!;L(QQXmswvIrwKj$4P+PeQ#+f8OMk4V^12xRmy};?sZ;NC_(;i0VtE1=G z0;t9m(`wJ}p+0Gx##sXMvd*za??F{KU}=R2suF54YV7AKOZ_GP zee*%IhrBDk`w7%lG9OLCtN}~Q#D03rvOuYR>621sM&_4yk!Lhe9Z9+(rl5KPUP;#+ zTkoYjF#9f{`~025n+1NND{SJuIC@Ne?%|8#DXDvwO`Sfh-p=&n>L*XB6b}!ZWfL72 zC7zG(xcc{0$<9HZWRwM!4@4yp)lNx*l}|WSJ_@LO_Nx{1xc1=JBiMd_Ng>A7P=wgB z(4{8aBG0F|7J6b&RaEUePzmiYzgYSDWrI0kD)AhVpT;T`Gb+)U7`JF5{DpU*4*CVu zK@C=oO*~0^$g|QZ+I-6TnKjI2u}R!|^N=lNxe~e@sC_gshKP-+COR##L{+G(6DP-S ziZNuF71C2KHzaJ1E6Ayh%FSSs%QiI=>tpjUR+g?U zRTt%Mm858lv3VP7B6HFzwWWnkLanM0W5csj%GVd?ZR7Gp>ocoU%8f1Pf1O_$lfEu9 zyDTm%r#!cU*}-XjW%bUQ-FpwOM8{KSMZHN7~qq^vQkw7jXJc}F*=D_eFt zc0YQ+g=41et&iZ?uKm5wavI0_jvgORFD~6y*4W%x-qg~yqx;b#oZji^dFFuY*eH&* zKC=I59P54d=m@8A?D+V^n+OpENeYExu|y)3(jYQfSXg+tLJ=7m6%`#F5us2hl~GYK zF|o06aVikCTBBLNJ~2_NO-@cp;r#LO8cjk%BFM6T!-ll9jEv08)YJ_d($h0Cva&XA z%*oM#2 zavJiHn3gn11xjHw5kssa;|LX@CK7~5H}F)i)7Amn*}ts2xt_E0Nhi|TZB84~bqow3 zU4Lhf4m)+c%a_1q%zY!lYnl7Tf)_ORjRmi2?i+(~_|gVX2PVwj+yv&RgZrCc$G~;+ zkZ#{&y}g|W;5jO`H|T86;2IC$qwn96ctGL%8*vc5d~dTlR1oYYfyOv8XoupsJD_xk zQ~w4Izes*wBOb?*1UW#VY-sobjT1_R&>$Ew(1gK;^VLD)^O?Z-6F2!F4iqv&n2!z6T9!jzSZ*oC{n5!FjP&^%Jc;8^rC=kMH&k5$k?KU*v>f`*+0M5V}pt-#Gnv%^w8zB>HlzDK(f`2_Uye=>_u*Q5oZ5%?kz|RTC$Jw0b`-NyJaDT$Z z$d%bHd&o62!Sm;5#I_LOWnL8_!q2(5;^5xmvV(*jzZNeJ;6Gb=VD41l@Kgw%3c=$Y zv??T`L-2G69`EQ?A(1=;FAw0oEAv^7U**~O`Lb7*0q^KlA%P9YS7q(fk_d0MRUrd! zl5ejaO(NxL5PBqv3f^unyYW6q;UTcC53x%_>@6X7Ylz(uV)upEN5IB=2%nuwc>kw^ zHa@GA@P4P(*c7_B#-`CHK^vbPN?8BjfQ<$3lt@^=8vzUc0DmN`*Vk)o1^V+E8`g{W zO`q_)ZQNW%5Lx4*W1_m_^R1^uxHiCTg5qeeY@T9#0to6v#+A;c?TVbS3{UA z^n06U2fwX(p8xJg6!;kh(Qp7%Vx6%3y+S7<)QD}+d$86bWXC#b`9OmIVbIe-+l4i3 zmO-q62cOdz|1+#%{99P3B6KO}zlt@C{~T-JyN)%C7s7iHz+r?xvshop8qWAHv4%4U epH%|&e;9{xf$_kDKZBV6QjqsUtRc@#kpJ%rqhNJNm$kvhc-LOz#~O@ZyI#kMU)bi6cEx(_U3(Y&T(47{ zo0~XL7ZReDqJRkxb8nPNX+*a+6+q73EfGk=&$8(~g9oO6aOo`2N1x z88f>kZOU!be{!Um-}!ytcfNDZ%y-UwnzO#f7w!+%8cNLZ#lFQ}ZFf{xIV#NNQb85F zmzTxRUS1_O=ru6L^tgWY_pVM?o7Wv0iUh*m%5raOcO#3Jw8cvtrHM9>B-pf!gd(h` zl=awIPZ^tt3~wp(_J{kKVaz}59T57mjndry-h3RDrRA{+^%|aNYIQ3V3QQ+f6s(Zl zWsJSNR*mPn`PZ;z%6V zuyGmZn3f%g<3@H^#u@ZagMYdt)3W1Bb;dZB%>EPnLrxNE+4rR?kYg*@CE!(!B-FBb zsS4y+D*JEX8x*BN(X#)Qsz8pVvyXx0$&ygZXg+d&9o!+)-vY0Z@kQ`@8Q0-~xnw*Q z`~ewX4c;o_dEipvm`>O$8ttE?g*ajMjrh&ofk-4YGC1KGn(X(PC&mIp zgIFygk1H^-KQcPz>1cI%JDr}kP`}q*?!ivg8tU^*g!?_Rt)(9;6HCWCF*Okh3{T|e zV{K0k1z5g6wz8|@)~Mai^08`Z4SLJtHCse+MZ6ePu&#_3!>u4ra9=Ho9U@BHUMdPO zfLKF&nN*QFwqrmvle@c+W7)1#y-XtPLvZi)`U1Ybkhg!Je|Rh~zQp}yp-1l$pWlC% z_(PA}CBu_LOJtzzuGN5C5t1n;iNt?BzSQptYiZ~*H?()Rn4Klg&6~~6(c!VsP#|pH zRcR};+w8WAva0IxlHFU%%mbrgGqzr4`Enx8Vz!Q&|4F`^c4MGYXm|AO^T4?^FyasS zMz#-yB9Wm0c>mbscIRjq0cUO7Vz!cK0HXHM5vux!LVe!;(UF1BpfIY=@aQ1EM`nEI z0}~#4YTdE5;b|J~3;6v3zj^m)cz<7Dq(5k`w3T{%;bBipyVKL}abbaZoq{W`dva*V z7Q}E`{<(9t**qPSk+I1LO|>I9A$4$H!*;fHw{&}2M*4>){Q(O@1jpuzd4zr8DMk~b zJxC}y8TJ*M^Xm;8bGKzz*dEka)>LKKi`=H-4Gp>5$~(E-tnxHlfiroNr8dW5Z_{sB zw>7KW+LB&U=(5ySbt~3pmXWQoz+AJsvg9FcUXCNPY;$v}bz`HsrecT6oLxb-DMfj8 zYpcuJrG8eHZfeS_bM&x(b^mD@1*q;72yCf`aY}(!YuxEsHwtDAI(z*A1 zeON-$?H!w#$tWnQDXwkkw$?TFxOP3fU&5x{UmNm_j2|MMbLXCYr2G2t*g*+NH!*YM zbXtBv^`>pLokcZuI~uxo1to0k*&TX#|Hw4y>brIhl5Wqw;U^>{-PpmI*@Eht_S(+w zK;4d>fnCA<|1RO~(9q)}(}zxwZs*{>$4EE)#KC7JB;CyH=?nNUDL780(rC0=z21Og zG$tpfq?k;psp;t}SFTuLGNq-Zr)OkjW@cq&qpV(?le2bhZm!vEvE=1R@-=I6a@MWO zMTyBbY}mN5uyE6+{QM0Y3JMAfi;6aHwpwi{B_(!ySy_2`MMYJW!y)%YZ8mN!DA=^A zsHnKuYAq=#E#17ixLDq%qN1|W;i#_Owymb7wzjTL?rZDTZ74B$LqlVu%hl9WU*FK+ zbh=z_cXM+~%Y!HnJ=E6L-rm`{V@G#)PmlEvH##(KZ&bx_nH0TrXTc+lmA@pJqE~a% zq-Ex4@1@=Yy^h{Xz5_moFA_An+4{vl-&xGR+HvD>{dzam=~BC&a+?LFavyP*9w8b0 zm~oX--Qso%TBY0QE_AmnwNotI`8_jVI`s0AXUo-!BZW$8bI^TM^hvE~RJcr}p*{)) zA9BB)?uVEBvIUI&Q0bA5PahpWcKhZH$2VX5Zbf4I|e@*;WB2XQxlw~<}F^ZRVK z$H7Rpb7oW@L{GZl7sXl|jq#tz6LLYFM zP5>`!_*PBb)U{~-d`^_jL%;B`YYzGWSL#XNWi8*T1uk4eOH;I%ET$J+r-UBTW`UPe z_|_!g^tEW=!n!D1fW@(!uIHkv4?lLj8*N=c?XnIw!2h@wEuPMbvT3rpOg0A>VADBG zHU_@c06carS}Kj@;z!V$E}lVeAEMTS_NMu>u+{Ue`gfyQuoXDaG5-$#j*;V!a@V4| z`HmYIM&s?IEmwGTPQOdTe=CXOTRAP?EMN-Xp49Ks@mx~M8IFIGQ}TzD$}=4|iqM9$ z*z&mBYRiwaIo=5kmqt9rV!W-h82GozmQ$X_n^ONEOT)X>O1?>{|2U!^# z)UbVG)wk92dPEbaNX){HxUk*eS`efl)*iDb8WZs14BbKLoB(UtS+ z+ex2kZ)grnM?Ykz<`I?bl;*6fmz_F@ z>rGq=A3LRet^s%MxhHXF&tzYeqW#o;M*HfoqW!CAzprTb{{zv!T8Q?n|7WzXS&H_5 z_1>N<+uKW~E>_ILCWx4$1; zw!h;`k+8o%zifZUw<2MGKYq{seg1Fm?`ZSY{{FZ2_ut;f{yukcu|*$Td~kUtV-PYK z74B(4J?>pW-BK=NUfSKYLM~%OE<>5i3^JGW6O`3xk=3LLxyu!GDv+`pQ!JN(%?hD5 zqfUuQ)X7WP&2FrK#rBu7b#oJc`z|y6UC|UFzAju#mUV zEw#|2);Vu2&>};+7EPK@;@{D7{9z7n3i;79Tn03nE&s(EkvpaE--fQ4)A0`osOMX> z+gt|ZPAkt;!H%4Aq|+lOdKz}>Si3wfA&WBd zN0(($Z}D#lSrjra0oCWM8#TzzE`0WAg%Mem5#Jd@Tvla3R;5K&l{TkBR+Y0Xt5PAW zdQAMzm?})$ZOFFX4-BU+w%;qKG7Ddsb;4IB{aj(z-Hht{SaJHZD&$bQWf_%0$f#6e zMzvn}#;{Ul{TtuYe){e!pS(i<5OQbu9hcT+*Sn?{>31_u9vE9h;h6HVl(c00CDkgl zN-d{T>C`%nPOH=D^g4sis7=zP33== zE~Og(z6tU3^dIS?7;U6N|8*PFBg^|}NZ-qa73trAq0pC3>`VKl^yP``3nx{=yzrm- ze&_tK|V;6zs=Ve0pq4OR?F3xla(a+n2@b^9;{C_|Qe}4hec0_-PSe z74ZWR|0?1-Wz4Qo!~qc>$2+OaWb6|{__YRIvgXM06N~$3@3| zv9lbE1=B~vSiIqwk5mlDc{uSxLEOQF4uFI>#4#P2GKM%ncZ?wpC~6t{O)TY!0+HkO z#>OCWvU^vo%Yph4#w-fytm!HQG=7AqP-snHNOAt&gF(H#Va!x$Lw!qSCEjn|J?!#f zAh&biLC_LSEOrRwbLoVgN_e<2OFU|!RN+o`=uRj-m{_Oq&|+M&+YT!4_k}F+9mULI z?+f)d(M}rri?EXy$;aL=XcrOfBp>9jM3 zq46EZg)kZ;PUR=CbH}Q2_vgXn??Z(}L2*y-Ls-K=@^=B36cea27xrj;u9lToA(8v* Qfn6_T?DT#)k%Oc zRx*CtK%$l$kb zSh6S)(!Na4M->Syi^yU66tr2m@~>WZh^-5Cf47M`slGdPcWfkMuSx$7+xdy}X=jf! z!})YqPgh1)XWvEt<)`5KmH37t>IYWE^@XMfE@&neZrxdEv2L~^XRH&}I-yl=HHS6q z0|6acg!I^cb{};qrt{8~=l4C+mjKaHFP!v~@fyKTVm)Xz2(3`;daFK&EVVXWV>K8- zZ>~LhLfZF36S;8bO7c$> zI+8B)(9>%@?DQcIGyTq0QJ1_gYWi%SWIB0va&r2hbmpzen3-iCF*|=-|J2R#ohm=$ zJ83!ZxA+qMOsB$6Jt^j`lBaHxQI%ijyRt>jOQh%hd50B#<>5rXtdjv$<(K;6{IX%d zViNt*PKr0lQ6J}*4xjfo_!NHmVYC4}8u1XO@TUoS?5_^`L(jco&j>FWV)GDb(Ni7v zY!*DBF9AKppJL`=d~a-df6FS1Y6fOeco{}*mYm_w(DN`anm04&_;WPF@1x)5W7OT2 zXns;o^9_L3!5AA@ny;f}{91XpW!~THd%_|)jxCE%G$RMU<exi5 zt9}xR3nBB!ZNQ@Nai6{!s7_V!?I7e7fumZol!5hdjIi^1HU z1-U&goZFRB;`O{%ftP0QzFrg}tz`l-qH}2=SuP^pr6tWX)4y->A6Z5Ab zV`f2p@GevcdJ9%La?sEF+kNMFc>?5WM#`Uo{-&^w0NuG@+aR=|K9Ki9HBgDxYHV3x zEK^|9fH_>?SUdDWCXa>;jTY@b(NU-zm^b*Tgfsj>!7C5FSeBm>Bm+q2!cwI#hJTyI z_!v3R$D+jYkAaVjKLqxNp!F6%33rM=B|pdSRljD5nmff)O7zO}vCwaWP$4u~aO6$b z8dw}VWH<_Av%%R|g0q3DMjn_U)H1@nqxrW4UT%q+7R@PUpSiiK^w0~`EX6Z&$?S7H zMa}zbe3GNoZTVlCuKj5@#jCrNN@_a6DxKX0^@qZD>gKo?(Lnvdr2Qd*;uF9o!77Ft zbfcLRh~^cgNJ~8 zW1fDOrnF4Ag&4g9X0s;0Ta!Pe)pj(EjSi2Ec0~SQ(d6g5+{5lc*Xn!XF2K8o$5xw% zyrb@&`HibUb`E!sto97T52+nP-ff!vCQ#bK-q21nmv=OKhkCuv0S)}(a*uRub9?$b zV7wjXM!U`4VH@o3A9K0W?r&>bXGR~evN#;I8;lJa=w!s(9XbAP{7{h8@w%nCT#YOv zwIZolyH=8xQW~$zu`2S?jj0ty&2(yFky4v!UXqBOKNmE(8UaUzfM%$R2mDS73^y@i>3?`| zeBX}{YwO**8?k{sdyj-TVh4`SK1Ya1MAKriM8YsqsSGGOddZTQ7=R;7xITe?)C zP%2fb`1obZ5)+evl9Scy<;zo3HJY@vl`BK~loYjk#fns*fIdAvBO@y-JDcOu(=#)( zvT|~AbMy1HKm`RlonBv5R9swIYA{5`LZ6I`%*^cUoSeM8{QQD~!ou9#yu3)C;^LAL zgQ2XfqN1|0s;as=GFEwc1yDe5G@48nOKojUjnQZ}TP#-Vnl(1tTA=#+#>RE)nw!_J zx7%Cckb{r~Alm62=)irFYu!ZIw&N?92j&B)mpLO9{W3EVye zW>Rh6FFPQ8gng8mkQ|IUB%Y)n!?TFIpdH#Af!`J;)yRJ70rnB*QOQKqLGdAal6p*J zR&~&3k!lCngyMQ>LQdYtK4h06A!PbKcA@@XhC`1ki1`)$Z>En1`VS5_%%&p_RK(=Q z!s8J#tQ#@~@*Rj9AQ3@aBVLpd|2>{M2^7FDN63hO5xs~%0y2^qV$wuR#)C5IXz1?? zY=r5?!hE=mqlqHI0T1}W5Z)uP0OEx|>Mjrw4oe7kK9)iQxKI?6v*;BI1{9%Q3EB|y zA)rdYk5Ed0$+P65;Cxa^qxfTrjDRd6nG{hsTzkb~c8EL-WO_l-ThjZyKAi1(F0l4O|+@JJdwT^!fqerU`+GRkp)_ItXB!{Ky0yF89DkKPp)dLr7cfwBHD;BtAk zFA7fAqKivE=Gg@hOvEwL?dnuoy}qrXNY~b&*KzIT z4LTiX2aO#xcF@>rYir@Yk!!Qp+BcMN58GSo&GnXmSPEiY1J`74Hkxa>T9eVhwbZUR zaLp~Xb^}*yG}*T6N$_O}FNt#z4&Kl`iWwuWE#Z|AkrtX}y|%D~M1`v_B9SqTQYu!Y zq~fRqQKBeGlq_07r-_z=F+6-CVxXZ6d_B}OC5T$^CIl1{E4D+FNr)mCCfIFog8&2Us!rHN zz(m+8327zxM*(b@;n7v0A^LIxpn|&;zf-|oI9x|l-1$i00YF1VB(O_Gk&~!J683zS zG-Ep)8TLrxMvXA%MKx&RP>lqeO@LyB1Q3z}Psu}`4k>~T!yy?s*x-X&hMQlAmJ-oF E0C?(@lK=n! literal 0 HcmV?d00001 diff --git a/car_llvmkot/src/lib/stm32f4d/pdm_filter.h b/car_llvmkot/src/lib/stm32f4d/pdm_filter.h new file mode 100644 index 00000000000..fb7d1057f82 --- /dev/null +++ b/car_llvmkot/src/lib/stm32f4d/pdm_filter.h @@ -0,0 +1,66 @@ +/** + ****************************************************************************** + * @file pdm_filter.h + * @author MCD Application Team + * @version V1.1.0 + * @date 28-October-2011 + * @brief Header file for PDM audio software decoding Library. + * This Library is used to decode and reconstruct the audio signal + * produced by MP45DT02 MEMS microphone from STMicroelectronics. + * For more details about this Library, please refer to document + * "PDM audio software decoding on STM32 microcontrollers (AN3998)". + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __PDM_FILTER_H +#define __PDM_FILTER_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include + +/* Exported types ------------------------------------------------------------*/ +typedef struct { + uint16_t Fs; + float LP_HZ; + float HP_HZ; + uint16_t In_MicChannels; + uint16_t Out_MicChannels; + char InternalFilter[34]; +} PDMFilter_InitStruct; + +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +#define HTONS(A) ((((u16)(A) & 0xff00) >> 8) | \ + (((u16)(A) & 0x00ff) << 8)) + +/* Exported functions ------------------------------------------------------- */ +void PDM_Filter_Init(PDMFilter_InitStruct * Filter); + +int32_t PDM_Filter_64_MSB(uint8_t* data, uint16_t* dataOut, uint16_t MicGain, PDMFilter_InitStruct * Filter); +int32_t PDM_Filter_80_MSB(uint8_t* data, uint16_t* dataOut, uint16_t MicGain, PDMFilter_InitStruct * Filter); +int32_t PDM_Filter_64_LSB(uint8_t* data, uint16_t* dataOut, uint16_t MicGain, PDMFilter_InitStruct * Filter); +int32_t PDM_Filter_80_LSB(uint8_t* data, uint16_t* dataOut, uint16_t MicGain, PDMFilter_InitStruct * Filter); + +#ifdef __cplusplus +} +#endif + +#endif /* __PDM_FILTER_H */ + +/*******************(C)COPYRIGHT 2011 STMicroelectronics *****END OF FILE******/ diff --git a/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery.c b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery.c new file mode 100644 index 00000000000..33993d0120e --- /dev/null +++ b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery.c @@ -0,0 +1,253 @@ +/** + ****************************************************************************** + * @file stm32f4_discovery.c + * @author MCD Application Team + * @version V1.1.0 + * @date 28-October-2011 + * @brief This file provides set of firmware functions to manage Leds and + * push-button available on STM32F4-Discovery Kit from STMicroelectronics. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4_discovery.h" + +/** @addtogroup Utilities + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY + * @{ + */ + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL + * @brief This file provides set of firmware functions to manage Leds and push-button + * available on STM32F4-Discovery Kit from STMicroelectronics. + * @{ + */ + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Private_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Private_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Private_Variables + * @{ + */ +GPIO_TypeDef* GPIO_PORT[LEDn] = {LED4_GPIO_PORT, LED3_GPIO_PORT, LED5_GPIO_PORT, + LED6_GPIO_PORT}; +const uint16_t GPIO_PIN[LEDn] = {LED4_PIN, LED3_PIN, LED5_PIN, + LED6_PIN}; +const uint32_t GPIO_CLK[LEDn] = {LED4_GPIO_CLK, LED3_GPIO_CLK, LED5_GPIO_CLK, + LED6_GPIO_CLK}; + +GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {USER_BUTTON_GPIO_PORT }; + +const uint16_t BUTTON_PIN[BUTTONn] = {USER_BUTTON_PIN }; + +const uint32_t BUTTON_CLK[BUTTONn] = {USER_BUTTON_GPIO_CLK }; + +const uint16_t BUTTON_EXTI_LINE[BUTTONn] = {USER_BUTTON_EXTI_LINE }; + +const uint8_t BUTTON_PORT_SOURCE[BUTTONn] = {USER_BUTTON_EXTI_PORT_SOURCE}; + +const uint8_t BUTTON_PIN_SOURCE[BUTTONn] = {USER_BUTTON_EXTI_PIN_SOURCE }; +const uint8_t BUTTON_IRQn[BUTTONn] = {USER_BUTTON_EXTI_IRQn }; + +NVIC_InitTypeDef NVIC_InitStructure; + +/** + * @} + */ + + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Private_Functions + * @{ + */ + +/** + * @brief Configures LED GPIO. + * @param Led: Specifies the Led to be configured. + * This parameter can be one of following parameters: + * @arg LED4 + * @arg LED3 + * @arg LED5 + * @arg LED6 + * @retval None + */ +void STM_EVAL_LEDInit(Led_TypeDef Led) +{ + GPIO_InitTypeDef GPIO_InitStructure; + + /* Enable the GPIO_LED Clock */ + RCC_AHB1PeriphClockCmd(GPIO_CLK[Led], ENABLE); + + /* Configure the GPIO_LED pin */ + GPIO_InitStructure.GPIO_Pin = GPIO_PIN[Led]; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIO_PORT[Led], &GPIO_InitStructure); +} + +/** + * @brief Turns selected LED On. + * @param Led: Specifies the Led to be set on. + * This parameter can be one of following parameters: + * @arg LED4 + * @arg LED3 + * @arg LED5 + * @arg LED6 + * @retval None + */ +void STM_EVAL_LEDOn(Led_TypeDef Led) +{ + GPIO_PORT[Led]->BSRRL = GPIO_PIN[Led]; +} + +/** + * @brief Turns selected LED Off. + * @param Led: Specifies the Led to be set off. + * This parameter can be one of following parameters: + * @arg LED4 + * @arg LED3 + * @arg LED5 + * @arg LED6 + * @retval None + */ +void STM_EVAL_LEDOff(Led_TypeDef Led) +{ + GPIO_PORT[Led]->BSRRH = GPIO_PIN[Led]; +} + +/** + * @brief Toggles the selected LED. + * @param Led: Specifies the Led to be toggled. + * This parameter can be one of following parameters: + * @arg LED4 + * @arg LED3 + * @arg LED5 + * @arg LED6 + * @retval None + */ +void STM_EVAL_LEDToggle(Led_TypeDef Led) +{ + GPIO_PORT[Led]->ODR ^= GPIO_PIN[Led]; +} + +/** + * @brief Configures Button GPIO and EXTI Line. + * @param Button: Specifies the Button to be configured. + * This parameter should be: BUTTON_USER + * @param Button_Mode: Specifies Button mode. + * This parameter can be one of following parameters: + * @arg BUTTON_MODE_GPIO: Button will be used as simple IO + * @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt + * generation capability + * @retval None + */ +void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode) +{ + GPIO_InitTypeDef GPIO_InitStructure; + EXTI_InitTypeDef EXTI_InitStructure; + NVIC_InitTypeDef NVIC_InitStructure; + + /* Enable the BUTTON Clock */ + RCC_AHB1PeriphClockCmd(BUTTON_CLK[Button], ENABLE); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); + + /* Configure Button pin as input */ + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_InitStructure.GPIO_Pin = BUTTON_PIN[Button]; + GPIO_Init(BUTTON_PORT[Button], &GPIO_InitStructure); + + if (Button_Mode == BUTTON_MODE_EXTI) + { + /* Connect Button EXTI Line to Button GPIO Pin */ + SYSCFG_EXTILineConfig(BUTTON_PORT_SOURCE[Button], BUTTON_PIN_SOURCE[Button]); + + /* Configure Button EXTI line */ + EXTI_InitStructure.EXTI_Line = BUTTON_EXTI_LINE[Button]; + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; + EXTI_InitStructure.EXTI_LineCmd = ENABLE; + EXTI_Init(&EXTI_InitStructure); + + /* Enable and set Button EXTI Interrupt to the lowest priority */ + NVIC_InitStructure.NVIC_IRQChannel = BUTTON_IRQn[Button]; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + + NVIC_Init(&NVIC_InitStructure); + } +} + +/** + * @brief Returns the selected Button state. + * @param Button: Specifies the Button to be checked. + * This parameter should be: BUTTON_USER + * @retval The Button GPIO pin value. + */ +uint32_t STM_EVAL_PBGetState(Button_TypeDef Button) +{ + return GPIO_ReadInputDataBit(BUTTON_PORT[Button], BUTTON_PIN[Button]); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery.h b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery.h new file mode 100644 index 00000000000..13695cdbe03 --- /dev/null +++ b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery.h @@ -0,0 +1,163 @@ +/** + ****************************************************************************** + * @file stm32f4_discovery.h + * @author MCD Application Team + * @version V1.1.0 + * @date 28-October-2011 + * @brief This file contains definitions for STM32F4-Discovery Kit's Leds and + * push-button hardware resources. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4_DISCOVERY_H +#define __STM32F4_DISCOVERY_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" +#include "stm32f4xx_gpio.h" +#include "stm32f4xx_rcc.h" +#include "stm32f4xx_exti.h" +#include "stm32f4xx_syscfg.h" +#include "misc.h" + +/** @addtogroup Utilities + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY_LOW_LEVEL + * @{ + */ + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Exported_Types + * @{ + */ +typedef enum +{ + LED4 = 0, + LED3 = 1, + LED5 = 2, + LED6 = 3 +} Led_TypeDef; + +typedef enum +{ + BUTTON_USER = 0, +} Button_TypeDef; + +typedef enum +{ + BUTTON_MODE_GPIO = 0, + BUTTON_MODE_EXTI = 1 +} ButtonMode_TypeDef; +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Exported_Constants + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY_LOW_LEVEL_LED + * @{ + */ +#define LEDn 4 + +#define LED4_PIN GPIO_Pin_12 +#define LED4_GPIO_PORT GPIOD +#define LED4_GPIO_CLK RCC_AHB1Periph_GPIOD + +#define LED3_PIN GPIO_Pin_13 +#define LED3_GPIO_PORT GPIOD +#define LED3_GPIO_CLK RCC_AHB1Periph_GPIOD + +#define LED5_PIN GPIO_Pin_14 +#define LED5_GPIO_PORT GPIOD +#define LED5_GPIO_CLK RCC_AHB1Periph_GPIOD + +#define LED6_PIN GPIO_Pin_15 +#define LED6_GPIO_PORT GPIOD +#define LED6_GPIO_CLK RCC_AHB1Periph_GPIOD +/** + * @} + */ + +/** @addtogroup STM32F4_DISCOVERY_LOW_LEVEL_BUTTON + * @{ + */ +#define BUTTONn 1 + +/** + * @brief Wakeup push-button + */ +#define USER_BUTTON_PIN GPIO_Pin_0 +#define USER_BUTTON_GPIO_PORT GPIOA +#define USER_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOA +#define USER_BUTTON_EXTI_LINE EXTI_Line0 +#define USER_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOA +#define USER_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource0 +#define USER_BUTTON_EXTI_IRQn EXTI0_IRQn +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Exported_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup STM32F4_DISCOVERY_LOW_LEVEL_Exported_Functions + * @{ + */ +void STM_EVAL_LEDInit(Led_TypeDef Led); +void STM_EVAL_LEDOn(Led_TypeDef Led); +void STM_EVAL_LEDOff(Led_TypeDef Led); +void STM_EVAL_LEDToggle(Led_TypeDef Led); +void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode); +uint32_t STM_EVAL_PBGetState(Button_TypeDef Button); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4_DISCOVERY_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_audio_codec.c b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_audio_codec.c new file mode 100644 index 00000000000..faa22267d53 --- /dev/null +++ b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_audio_codec.c @@ -0,0 +1,1650 @@ +/** + ****************************************************************************** + * @file stm32f4_discovery_audio_codec.c + * @author MCD Application Team + * @version V1.1.0 + * @date 28-October-2011 + * @brief This file includes the low layer driver for CS43L22 Audio Codec + * available on STM32F4-Discovery Kit. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/*============================================================================================================================== + User NOTES +1. How To use this driver: +-------------------------- + - This driver supports STM32F4xx devices on STM32F4-Discovery Kit. + + - Configure the options in file stm32f4_discovery_audio_codec.h in the section CONFIGURATION. + Refer to the sections 2 and 3 to have more details on the possible configurations. + + - Call the function EVAL_AUDIO_Init( + OutputDevice: physical output mode (OUTPUT_DEVICE_SPEAKER, + OUTPUT_DEVICE_HEADPHONE, OUTPUT_DEVICE_AUTO or + OUTPUT_DEVICE_BOTH) + Volume: initial volume to be set (0 is min (mute), 100 is max (100%) + AudioFreq: Audio frequency in Hz (8000, 16000, 22500, 32000 ...) + this parameter is relative to the audio file/stream type. + ) + This function configures all the hardware required for the audio application (codec, I2C, I2S, + GPIOs, DMA and interrupt if needed). This function returns 0 if configuration is OK. + if the returned value is different from 0 or the function is stuck then the communication with + the codec (try to un-plug the power or reset device in this case). + + OUTPUT_DEVICE_SPEAKER: only speaker will be set as output for the audio stream. + + OUTPUT_DEVICE_HEADPHONE: only headphones will be set as output for the audio stream. + + OUTPUT_DEVICE_AUTO: Selection of output device is made through external switch (implemented + into the audio jack on the evaluation board). When the Headphone is connected it is used + as output. When the headphone is disconnected from the audio jack, the output is + automatically switched to Speaker. + + OUTPUT_DEVICE_BOTH: both Speaker and Headphone are used as outputs for the audio stream + at the same time. + + - Call the function EVAL_AUDIO_Play( + pBuffer: pointer to the audio data file address + Size: size of the buffer to be sent in Bytes + ) + to start playing (for the first time) from the audio file/stream. + + - Call the function EVAL_AUDIO_PauseResume( + Cmd: AUDIO_PAUSE (or 0) to pause playing or AUDIO_RESUME (or + any value different from 0) to resume playing. + ) + Note. After calling EVAL_AUDIO_PauseResume() function for pause, only EVAL_AUDIO_PauseResume() should be called + for resume (it is not allowed to call EVAL_AUDIO_Play() in this case). + Note. This function should be called only when the audio file is played or paused (not stopped). + + - For each mode, you may need to implement the relative callback functions into your code. + The Callback functions are named EVAL_AUDIO_XXX_CallBack() and only their prototypes are declared in + the stm32f4_discovery_audio_codec.h file. (refer to the example for more details on the callbacks implementations) + + - To Stop playing, to modify the volume level or to mute, use the functions + EVAL_AUDIO_Stop(), EVAL_AUDIO_VolumeCtl() and EVAL_AUDIO_Mute(). + + - The driver API and the callback functions are at the end of the stm32f4_discovery_audio_codec.h file. + + + Driver architecture: + -------------------- + This driver is composed of three main layers: + o High Audio Layer: consists of the function API exported in the stm32f4_discovery_audio_codec.h file + (EVAL_AUDIO_Init(), EVAL_AUDIO_Play() ...) + o Codec Control layer: consists of the functions API controlling the audio codec (CS43L22) and + included as local functions in file stm32f4_discovery_audio_codec.c (Codec_Init(), Codec_Play() ...) + o Media Access Layer (MAL): which consists of functions allowing to access the media containing/ + providing the audio file/stream. These functions are also included as local functions into + the stm32f4_discovery_audio_codec.c file (Audio_MAL_Init(), Audio_MAL_Play() ...) + Each set of functions (layer) may be implemented independently of the others and customized when + needed. + +2. Modes description: +--------------------- + + AUDIO_MAL_MODE_NORMAL : is suitable when the audio file is in a memory location. + + AUDIO_MAL_MODE_CIRCULAR: is suitable when the audio data are read either from a + memory location or from a device at real time (double buffer could be used). + +3. DMA interrupts description: +------------------------------ + + EVAL_AUDIO_IT_TC_ENABLE: Enable this define to use the DMA end of transfer interrupt. + then, a callback should be implemented by user to perform specific actions + when the DMA has finished the transfer. + + EVAL_AUDIO_IT_HT_ENABLE: Enable this define to use the DMA end of half transfer interrupt. + then, a callback should be implemented by user to perform specific actions + when the DMA has reached the half of the buffer transfer (generally, it is useful + to load the first half of buffer while DMA is loading from the second half). + + EVAL_AUDIO_IT_ER_ENABLE: Enable this define to manage the cases of error on DMA transfer. + +4. Known Limitations: +--------------------- + 1- When using the Speaker, if the audio file quality is not high enough, the speaker output + may produce high and uncomfortable noise level. To avoid this issue, to use speaker + output properly, try to increase audio file sampling rate (typically higher than 48KHz). + This operation will lead to larger file size. + 2- Communication with the audio codec (through I2C) may be corrupted if it is interrupted by some + user interrupt routines (in this case, interrupts could be disabled just before the start of + communication then re-enabled when it is over). Note that this communication is only done at + the configuration phase (EVAL_AUDIO_Init() or EVAL_AUDIO_Stop()) and when Volume control modification is + performed (EVAL_AUDIO_VolumeCtl() or EVAL_AUDIO_Mute()). When the audio data is played, no communication is + required with the audio codec. + 3- Parsing of audio file is not implemented (in order to determine audio file properties: Mono/Stereo, Data size, + File size, Audio Frequency, Audio Data header size ...). The configuration is fixed for the given audio file. + 4- Mono audio streaming is not supported (in order to play mono audio streams, each data should be sent twice + on the I2S or should be duplicated on the source buffer. Or convert the stream in stereo before playing). + 5- Supports only 16-bit audio data size. +===============================================================================================================================*/ + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4_discovery_audio_codec.h" + +/** @addtogroup Utilities + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY_AUDIO_CODEC + * @brief This file includes the low layer driver for CS43L22 Audio Codec + * available on STM32F4-Discovery Kit. + * @{ + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Private_Types + * @{ + */ +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Private_Defines + * @{ + */ + +/* Mask for the bit EN of the I2S CFGR register */ +#define I2S_ENABLE_MASK 0x0400 + +/* Delay for the Codec to be correctly reset */ +#define CODEC_RESET_DELAY 0x4FFF + +/* Codec audio Standards */ +#ifdef I2S_STANDARD_PHILLIPS + #define CODEC_STANDARD 0x04 + #define I2S_STANDARD I2S_Standard_Phillips +#elif defined(I2S_STANDARD_MSB) + #define CODEC_STANDARD 0x00 + #define I2S_STANDARD I2S_Standard_MSB +#elif defined(I2S_STANDARD_LSB) + #define CODEC_STANDARD 0x08 + #define I2S_STANDARD I2S_Standard_LSB +#else + #error "Error: No audio communication standard selected !" +#endif /* I2S_STANDARD */ + +/* The 7 bits Codec address (sent through I2C interface) */ +#define CODEC_ADDRESS 0x94 /* b00100111 */ +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Private_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Private_Variables + * @{ + */ +/* This structure is declared global because it is handled by two different functions */ +DMA_InitTypeDef DMA_InitStructure; +DMA_InitTypeDef AUDIO_MAL_DMA_InitStructure; + +uint32_t AudioTotalSize = 0xFFFF; /* This variable holds the total size of the audio file */ +uint32_t AudioRemSize = 0xFFFF; /* This variable holds the remaining data in audio file */ +uint16_t *CurrentPos ; /* This variable holds the current position of audio pointer */ + +__IO uint32_t CODECTimeout = CODEC_LONG_TIMEOUT; +__IO uint8_t OutputDev = 0; + + +__IO uint32_t CurrAudioInterface = AUDIO_INTERFACE_I2S; //AUDIO_INTERFACE_DAC +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Private_Function_Prototypes + * @{ + */ +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Private_Functions + * @{ + */ +static void Audio_MAL_IRQHandler(void); +/*----------------------------------- + Audio Codec functions + ------------------------------------------*/ +/* High Layer codec functions */ +static uint32_t Codec_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq); +static uint32_t Codec_DeInit(void); +static uint32_t Codec_Play(void); +static uint32_t Codec_PauseResume(uint32_t Cmd); +static uint32_t Codec_Stop(uint32_t Cmd); +static uint32_t Codec_VolumeCtrl(uint8_t Volume); +static uint32_t Codec_Mute(uint32_t Cmd); +/* Low layer codec functions */ +static void Codec_CtrlInterface_Init(void); +static void Codec_CtrlInterface_DeInit(void); +static void Codec_AudioInterface_Init(uint32_t AudioFreq); +static void Codec_AudioInterface_DeInit(void); +static void Codec_Reset(void); +static uint32_t Codec_WriteRegister(uint8_t RegisterAddr, uint8_t RegisterValue); +static uint32_t Codec_ReadRegister(uint8_t RegisterAddr); +static void Codec_GPIO_Init(void); +static void Codec_GPIO_DeInit(void); +static void Delay(__IO uint32_t nCount); +/*----------------------------------------------------------------------------*/ + +/*----------------------------------- + MAL (Media Access Layer) functions + ------------------------------------------*/ +/* Peripherals configuration functions */ +static void Audio_MAL_Init(void); +static void Audio_MAL_DeInit(void); +static void Audio_MAL_PauseResume(uint32_t Cmd, uint32_t Addr); +static void Audio_MAL_Stop(void); +/*----------------------------------------------------------------------------*/ + + /* DMA Stream definitions */ + uint32_t AUDIO_MAL_DMA_CLOCK = AUDIO_I2S_DMA_CLOCK; + DMA_Stream_TypeDef * AUDIO_MAL_DMA_STREAM = AUDIO_I2S_DMA_STREAM ; + uint32_t AUDIO_MAL_DMA_DREG = AUDIO_I2S_DMA_DREG; + uint32_t AUDIO_MAL_DMA_CHANNEL = AUDIO_I2S_DMA_CHANNEL; + uint32_t AUDIO_MAL_DMA_IRQ = AUDIO_I2S_DMA_IRQ ; + uint32_t AUDIO_MAL_DMA_FLAG_TC = AUDIO_I2S_DMA_FLAG_TC; + uint32_t AUDIO_MAL_DMA_FLAG_HT = AUDIO_I2S_DMA_FLAG_HT; + uint32_t AUDIO_MAL_DMA_FLAG_FE = AUDIO_I2S_DMA_FLAG_FE; + uint32_t AUDIO_MAL_DMA_FLAG_TE = AUDIO_I2S_DMA_FLAG_TE; + uint32_t AUDIO_MAL_DMA_FLAG_DME = AUDIO_I2S_DMA_FLAG_DME; + +/** + * @brief Set the current audio interface (I2S or DAC). + * @param Interface: AUDIO_INTERFACE_I2S or AUDIO_INTERFACE_DAC + * @retval None + */ +void EVAL_AUDIO_SetAudioInterface(uint32_t Interface) +{ + CurrAudioInterface = Interface; + + if (CurrAudioInterface == AUDIO_INTERFACE_I2S) + { + /* DMA Stream definitions */ + AUDIO_MAL_DMA_CLOCK = AUDIO_I2S_DMA_CLOCK; + AUDIO_MAL_DMA_STREAM = AUDIO_I2S_DMA_STREAM; + AUDIO_MAL_DMA_DREG = AUDIO_I2S_DMA_DREG; + AUDIO_MAL_DMA_CHANNEL = AUDIO_I2S_DMA_CHANNEL; + AUDIO_MAL_DMA_IRQ = AUDIO_I2S_DMA_IRQ ; + AUDIO_MAL_DMA_FLAG_TC = AUDIO_I2S_DMA_FLAG_TC; + AUDIO_MAL_DMA_FLAG_HT = AUDIO_I2S_DMA_FLAG_HT; + AUDIO_MAL_DMA_FLAG_FE = AUDIO_I2S_DMA_FLAG_FE; + AUDIO_MAL_DMA_FLAG_TE = AUDIO_I2S_DMA_FLAG_TE; + AUDIO_MAL_DMA_FLAG_DME = AUDIO_I2S_DMA_FLAG_DME; + } + else if (Interface == AUDIO_INTERFACE_DAC) + { + /* DMA Stream definitions */ + AUDIO_MAL_DMA_CLOCK = AUDIO_DAC_DMA_CLOCK; + AUDIO_MAL_DMA_STREAM = AUDIO_DAC_DMA_STREAM; + AUDIO_MAL_DMA_DREG = AUDIO_DAC_DMA_DREG; + AUDIO_MAL_DMA_CHANNEL = AUDIO_DAC_DMA_CHANNEL; + AUDIO_MAL_DMA_IRQ = AUDIO_DAC_DMA_IRQ ; + AUDIO_MAL_DMA_FLAG_TC = AUDIO_DAC_DMA_FLAG_TC; + AUDIO_MAL_DMA_FLAG_HT = AUDIO_DAC_DMA_FLAG_HT; + AUDIO_MAL_DMA_FLAG_FE = AUDIO_DAC_DMA_FLAG_FE; + AUDIO_MAL_DMA_FLAG_TE = AUDIO_DAC_DMA_FLAG_TE; + AUDIO_MAL_DMA_FLAG_DME = AUDIO_DAC_DMA_FLAG_DME; + } +} + +/** + * @brief Configure the audio peripherals. + * @param OutputDevice: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE, + * OUTPUT_DEVICE_BOTH or OUTPUT_DEVICE_AUTO . + * @param Volume: Initial volume level (from 0 (Mute) to 100 (Max)) + * @param AudioFreq: Audio frequency used to play the audio stream. + * @retval 0 if correct communication, else wrong communication + */ +uint32_t EVAL_AUDIO_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq) +{ + /* Perform low layer Codec initialization */ + if (Codec_Init(OutputDevice, VOLUME_CONVERT(Volume), AudioFreq) != 0) + { + return 1; + } + else + { + /* I2S data transfer preparation: + Prepare the Media to be used for the audio transfer from memory to I2S peripheral */ + Audio_MAL_Init(); + + /* Return 0 when all operations are OK */ + return 0; + } +} + +/** + * @brief Deinitializes all the resources used by the codec (those initialized + * by EVAL_AUDIO_Init() function). + * @param None + * @retval 0 if correct communication, else wrong communication + */ +uint32_t EVAL_AUDIO_DeInit(void) +{ + /* DeInitialize the Media layer */ + Audio_MAL_DeInit(); + + /* DeInitialize Codec */ + Codec_DeInit(); + + return 0; +} + +/** + * @brief Starts playing audio stream from a data buffer for a determined size. + * @param pBuffer: Pointer to the buffer + * @param Size: Number of audio data BYTES. + * @retval 0 if correct communication, else wrong communication + */ +uint32_t EVAL_AUDIO_Play(uint16_t* pBuffer, uint32_t Size) +{ + /* Set the total number of data to be played (count in half-word) */ + AudioTotalSize = Size; + + /* Call the audio Codec Play function */ + Codec_Play(); + + /* Update the Media layer and enable it for play */ + Audio_MAL_Play((uint32_t)pBuffer, (uint32_t)(DMA_MAX(Size/4))); + + /* Update the remaining number of data to be played */ + AudioRemSize = (Size/2) - DMA_MAX(AudioTotalSize); + + /* Update the current audio pointer position */ + CurrentPos = pBuffer + DMA_MAX(AudioTotalSize); + + return 0; +} + +/** + * @brief This function Pauses or Resumes the audio file stream. In case + * of using DMA, the DMA Pause feature is used. In all cases the I2S + * peripheral is disabled. + * + * @WARNING When calling EVAL_AUDIO_PauseResume() function for pause, only + * this function should be called for resume (use of EVAL_AUDIO_Play() + * function for resume could lead to unexpected behavior). + * + * @param Cmd: AUDIO_PAUSE (or 0) to pause, AUDIO_RESUME (or any value different + * from 0) to resume. + * @retval 0 if correct communication, else wrong communication + */ +uint32_t EVAL_AUDIO_PauseResume(uint32_t Cmd) +{ + /* Call the Audio Codec Pause/Resume function */ + if (Codec_PauseResume(Cmd) != 0) + { + return 1; + } + else + { + /* Call the Media layer pause/resume function */ + Audio_MAL_PauseResume(Cmd, 0); + + /* Return 0 if all operations are OK */ + return 0; + } +} + +/** + * @brief Stops audio playing and Power down the Audio Codec. + * @param Option: could be one of the following parameters + * - CODEC_PDWN_SW: for software power off (by writing registers). + * Then no need to reconfigure the Codec after power on. + * - CODEC_PDWN_HW: completely shut down the codec (physically). + * Then need to reconfigure the Codec after power on. + * @retval 0 if correct communication, else wrong communication + */ +uint32_t EVAL_AUDIO_Stop(uint32_t Option) +{ + /* Call Audio Codec Stop function */ + if (Codec_Stop(Option) != 0) + { + return 1; + } + else + { + /* Call Media layer Stop function */ + Audio_MAL_Stop(); + + /* Update the remaining data number */ + AudioRemSize = AudioTotalSize; + + /* Return 0 when all operations are correctly done */ + return 0; + } +} + +/** + * @brief Controls the current audio volume level. + * @param Volume: Volume level to be set in percentage from 0% to 100% (0 for + * Mute and 100 for Max volume level). + * @retval 0 if correct communication, else wrong communication + */ +uint32_t EVAL_AUDIO_VolumeCtl(uint8_t Volume) +{ + /* Call the codec volume control function with converted volume value */ + return (Codec_VolumeCtrl(VOLUME_CONVERT(Volume))); +} + +/** + * @brief Enables or disables the MUTE mode by software + * @param Command: could be AUDIO_MUTE_ON to mute sound or AUDIO_MUTE_OFF to + * unmute the codec and restore previous volume level. + * @retval 0 if correct communication, else wrong communication + */ +uint32_t EVAL_AUDIO_Mute(uint32_t Cmd) +{ + /* Call the Codec Mute function */ + return (Codec_Mute(Cmd)); +} + +/** + * @brief This function handles main Media layer interrupt. + * @param None + * @retval 0 if correct communication, else wrong communication + */ +static void Audio_MAL_IRQHandler(void) +{ +#ifndef AUDIO_MAL_MODE_NORMAL + uint16_t *pAddr = (uint16_t *)CurrentPos; + uint32_t Size = AudioRemSize; +#endif /* AUDIO_MAL_MODE_NORMAL */ + +#ifdef AUDIO_MAL_DMA_IT_TC_EN + /* Transfer complete interrupt */ + if (DMA_GetFlagStatus(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_TC) != RESET) + { + #ifdef AUDIO_MAL_MODE_NORMAL + /* Check if the end of file has been reached */ + if (AudioRemSize > 0) + { + /* Wait the DMA Stream to be effectively disabled */ + while (DMA_GetCmdStatus(AUDIO_MAL_DMA_STREAM) != DISABLE) + {} + + /* Clear the Interrupt flag */ + DMA_ClearFlag(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_TC); + + /* Re-Configure the buffer address and size */ + DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t) CurrentPos; + DMA_InitStructure.DMA_BufferSize = (uint32_t) (DMA_MAX(AudioRemSize)); + + /* Configure the DMA Stream with the new parameters */ + DMA_Init(AUDIO_MAL_DMA_STREAM, &DMA_InitStructure); + + /* Enable the I2S DMA Stream*/ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, ENABLE); + + /* Update the current pointer position */ + CurrentPos += DMA_MAX(AudioRemSize); + + /* Update the remaining number of data to be played */ + AudioRemSize -= DMA_MAX(AudioRemSize); + /* Enable the I2S DMA Stream*/ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, ENABLE); + } + else + { + /* Disable the I2S DMA Stream*/ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, DISABLE); + + /* Clear the Interrupt flag */ + DMA_ClearFlag(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_TC); + + /* Manage the remaining file size and new address offset: This function + should be coded by user (its prototype is already declared in stm32f4_discovery_audio_codec.h) */ + EVAL_AUDIO_TransferComplete_CallBack((uint32_t)CurrentPos, 0); + } + + #elif defined(AUDIO_MAL_MODE_CIRCULAR) + /* Manage the remaining file size and new address offset: This function + should be coded by user (its prototype is already declared in stm32f4_discovery_audio_codec.h) */ + EVAL_AUDIO_TransferComplete_CallBack(pAddr, Size); + + /* Clear the Interrupt flag */ + DMA_ClearFlag(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_TC); + #endif /* AUDIO_MAL_MODE_NORMAL */ + } +#endif /* AUDIO_MAL_DMA_IT_TC_EN */ + +#ifdef AUDIO_MAL_DMA_IT_HT_EN + /* Half Transfer complete interrupt */ + if (DMA_GetFlagStatus(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_HT) != RESET) + { + /* Manage the remaining file size and new address offset: This function + should be coded by user (its prototype is already declared in stm32f4_discovery_audio_codec.h) */ + EVAL_AUDIO_HalfTransfer_CallBack((uint32_t)pAddr, Size); + + /* Clear the Interrupt flag */ + DMA_ClearFlag(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_HT); + } +#endif /* AUDIO_MAL_DMA_IT_HT_EN */ + +#ifdef AUDIO_MAL_DMA_IT_TE_EN + /* FIFO Error interrupt */ + if ((DMA_GetFlagStatus(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_TE) != RESET) || \ + (DMA_GetFlagStatus(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_FE) != RESET) || \ + (DMA_GetFlagStatus(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_DME) != RESET)) + + { + /* Manage the error generated on DMA FIFO: This function + should be coded by user (its prototype is already declared in stm32f4_discovery_audio_codec.h) */ + EVAL_AUDIO_Error_CallBack((uint32_t*)&pAddr); + + /* Clear the Interrupt flag */ + DMA_ClearFlag(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_TE | AUDIO_MAL_DMA_FLAG_FE | \ + AUDIO_MAL_DMA_FLAG_DME); + } +#endif /* AUDIO_MAL_DMA_IT_TE_EN */ +} + +/** + * @brief This function handles main I2S interrupt. + * @param None + * @retval 0 if correct communication, else wrong communication + */ +void Audio_MAL_I2S_IRQHandler(void) +{ + Audio_MAL_IRQHandler(); +} + +/** + * @brief This function handles main DAC interrupt. + * @param None + * @retval 0 if correct communication, else wrong communication + */ +void Audio_MAL_DAC_IRQHandler(void) +{ + Audio_MAL_IRQHandler(); +} + +/** + * @brief I2S interrupt management + * @param None + * @retval None + */ +void Audio_I2S_IRQHandler(void) +{ + /* Check on the I2S TXE flag */ + if (SPI_I2S_GetFlagStatus(SPI3, SPI_I2S_FLAG_TXE) != RESET) + { + if (CurrAudioInterface == AUDIO_INTERFACE_DAC) + { + /* Wirte data to the DAC interface */ + DAC_SetChannel1Data(DAC_Align_12b_L, EVAL_AUDIO_GetSampleCallBack()); + } + + /* Send dummy data on I2S to avoid the underrun condition */ + SPI_I2S_SendData(CODEC_I2S, EVAL_AUDIO_GetSampleCallBack()); + } +} +/*======================== + + CS43L22 Audio Codec Control Functions + ==============================*/ +/** + * @brief Initializes the audio codec and all related interfaces (control + * interface: I2C and audio interface: I2S) + * @param OutputDevice: can be OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE, + * OUTPUT_DEVICE_BOTH or OUTPUT_DEVICE_AUTO . + * @param Volume: Initial volume level (from 0 (Mute) to 100 (Max)) + * @param AudioFreq: Audio frequency used to play the audio stream. + * @retval 0 if correct communication, else wrong communication + */ +static uint32_t Codec_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq) +{ + uint32_t counter = 0; + + /* Configure the Codec related IOs */ + Codec_GPIO_Init(); + + /* Reset the Codec Registers */ + Codec_Reset(); + + /* Initialize the Control interface of the Audio Codec */ + Codec_CtrlInterface_Init(); + + /* Keep Codec powered OFF */ + counter += Codec_WriteRegister(0x02, 0x01); + + counter += Codec_WriteRegister(0x04, 0xAF); /* SPK always OFF & HP always ON */ + OutputDev = 0xAF; + + /* Clock configuration: Auto detection */ + counter += Codec_WriteRegister(0x05, 0x81); + + /* Set the Slave Mode and the audio Standard */ + counter += Codec_WriteRegister(0x06, CODEC_STANDARD); + + /* Set the Master volume */ + Codec_VolumeCtrl(Volume); + + if (CurrAudioInterface == AUDIO_INTERFACE_DAC) + { + /* Enable the PassThrough on AIN1A and AIN1B */ + counter += Codec_WriteRegister(0x08, 0x01); + counter += Codec_WriteRegister(0x09, 0x01); + + /* Route the analog input to the HP line */ + counter += Codec_WriteRegister(0x0E, 0xC0); + + /* Set the Passthough volume */ + counter += Codec_WriteRegister(0x14, 0x00); + counter += Codec_WriteRegister(0x15, 0x00); + } + + /* Power on the Codec */ + counter += Codec_WriteRegister(0x02, 0x9E); + + /* Additional configuration for the CODEC. These configurations are done to reduce + the time needed for the Codec to power off. If these configurations are removed, + then a long delay should be added between powering off the Codec and switching + off the I2S peripheral MCLK clock (which is the operating clock for Codec). + If this delay is not inserted, then the codec will not shut down properly and + it results in high noise after shut down. */ + + /* Disable the analog soft ramp */ + counter += Codec_WriteRegister(0x0A, 0x00); + if (CurrAudioInterface != AUDIO_INTERFACE_DAC) + { + /* Disable the digital soft ramp */ + counter += Codec_WriteRegister(0x0E, 0x04); + } + /* Disable the limiter attack level */ + counter += Codec_WriteRegister(0x27, 0x00); + /* Adjust Bass and Treble levels */ + counter += Codec_WriteRegister(0x1F, 0x0F); + /* Adjust PCM volume level */ + counter += Codec_WriteRegister(0x1A, 0x0A); + counter += Codec_WriteRegister(0x1B, 0x0A); + + /* Configure the I2S peripheral */ + Codec_AudioInterface_Init(AudioFreq); + + /* Return communication control value */ + return counter; +} + +/** + * @brief Restore the audio codec state to default state and free all used + * resources. + * @param None + * @retval 0 if correct communication, else wrong communication + */ +static uint32_t Codec_DeInit(void) +{ + uint32_t counter = 0; + + /* Reset the Codec Registers */ + Codec_Reset(); + + /* Keep Codec powered OFF */ + counter += Codec_WriteRegister(0x02, 0x01); + + /* Deinitialize all use GPIOs */ + Codec_GPIO_DeInit(); + + /* Disable the Codec control interface */ + Codec_CtrlInterface_DeInit(); + + /* Deinitialize the Codec audio interface (I2S) */ + Codec_AudioInterface_DeInit(); + + /* Return communication control value */ + return counter; +} + +/** + * @brief Start the audio Codec play feature. + * @note For this codec no Play options are required. + * @param None + * @retval 0 if correct communication, else wrong communication + */ +static uint32_t Codec_Play(void) +{ + /* + No actions required on Codec level for play command + */ + + /* Return communication control value */ + return 0; +} + +/** + * @brief Pauses and resumes playing on the audio codec. + * @param Cmd: AUDIO_PAUSE (or 0) to pause, AUDIO_RESUME (or any value different + * from 0) to resume. + * @retval 0 if correct communication, else wrong communication + */ +static uint32_t Codec_PauseResume(uint32_t Cmd) +{ + uint32_t counter = 0; + + /* Pause the audio file playing */ + if (Cmd == AUDIO_PAUSE) + { + /* Mute the output first */ + counter += Codec_Mute(AUDIO_MUTE_ON); + + /* Put the Codec in Power save mode */ + counter += Codec_WriteRegister(0x02, 0x01); + } + else /* AUDIO_RESUME */ + { + /* Unmute the output first */ + counter += Codec_Mute(AUDIO_MUTE_OFF); + + counter += Codec_WriteRegister(0x04, OutputDev); + + /* Exit the Power save mode */ + counter += Codec_WriteRegister(0x02, 0x9E); + } + + return counter; +} + +/** + * @brief Stops audio Codec playing. It powers down the codec. + * @param CodecPdwnMode: selects the power down mode. + * - CODEC_PDWN_SW: only mutes the audio codec. When resuming from this + * mode the codec keeps the previous initialization + * (no need to re-Initialize the codec registers). + * - CODEC_PDWN_HW: Physically power down the codec. When resuming from this + * mode, the codec is set to default configuration + * (user should re-Initialize the codec in order to + * play again the audio stream). + * @retval 0 if correct communication, else wrong communication + */ +static uint32_t Codec_Stop(uint32_t CodecPdwnMode) +{ + uint32_t counter = 0; + + /* Mute the output first */ + Codec_Mute(AUDIO_MUTE_ON); + + if (CodecPdwnMode == CODEC_PDWN_SW) + { + /* Power down the DAC and the speaker (PMDAC and PMSPK bits)*/ + counter += Codec_WriteRegister(0x02, 0x9F); + } + else /* CODEC_PDWN_HW */ + { + /* Power down the DAC components */ + counter += Codec_WriteRegister(0x02, 0x9F); + + /* Wait at least 100us */ + Delay(0xFFF); + + /* Reset The pin */ + GPIO_WriteBit(AUDIO_RESET_GPIO, AUDIO_RESET_PIN, Bit_RESET); + } + + return counter; +} + +/** + * @brief Sets higher or lower the codec volume level. + * @param Volume: a byte value from 0 to 255 (refer to codec registers + * description for more details). + * @retval 0 if correct communication, else wrong communication + */ +static uint32_t Codec_VolumeCtrl(uint8_t Volume) +{ + uint32_t counter = 0; + + if (Volume > 0xE6) + { + /* Set the Master volume */ + counter += Codec_WriteRegister(0x20, Volume - 0xE7); + counter += Codec_WriteRegister(0x21, Volume - 0xE7); + } + else + { + /* Set the Master volume */ + counter += Codec_WriteRegister(0x20, Volume + 0x19); + counter += Codec_WriteRegister(0x21, Volume + 0x19); + } + + return counter; +} + +/** + * @brief Enables or disables the mute feature on the audio codec. + * @param Cmd: AUDIO_MUTE_ON to enable the mute or AUDIO_MUTE_OFF to disable the + * mute mode. + * @retval 0 if correct communication, else wrong communication + */ +static uint32_t Codec_Mute(uint32_t Cmd) +{ + uint32_t counter = 0; + + /* Set the Mute mode */ + if (Cmd == AUDIO_MUTE_ON) + { + counter += Codec_WriteRegister(0x04, 0xFF); + } + else /* AUDIO_MUTE_OFF Disable the Mute */ + { + counter += Codec_WriteRegister(0x04, OutputDev); + } + + return counter; +} + +/** + * @brief Resets the audio codec. It restores the default configuration of the + * codec (this function shall be called before initializing the codec). + * @note This function calls an external driver function: The IO Expander driver. + * @param None + * @retval None + */ +static void Codec_Reset(void) +{ + /* Power Down the codec */ + GPIO_WriteBit(AUDIO_RESET_GPIO, AUDIO_RESET_PIN, Bit_RESET); + + /* wait for a delay to insure registers erasing */ + Delay(CODEC_RESET_DELAY); + + /* Power on the codec */ + GPIO_WriteBit(AUDIO_RESET_GPIO, AUDIO_RESET_PIN, Bit_SET); +} + +/** + * @brief Writes a Byte to a given register into the audio codec through the + control interface (I2C) + * @param RegisterAddr: The address (location) of the register to be written. + * @param RegisterValue: the Byte value to be written into destination register. + * @retval 0 if correct communication, else wrong communication + */ +static uint32_t Codec_WriteRegister(uint8_t RegisterAddr, uint8_t RegisterValue) +{ + uint32_t result = 0; + + /*!< While the bus is busy */ + CODECTimeout = CODEC_LONG_TIMEOUT; + while(I2C_GetFlagStatus(CODEC_I2C, I2C_FLAG_BUSY)) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /* Start the config sequence */ + I2C_GenerateSTART(CODEC_I2C, ENABLE); + + /* Test on EV5 and clear it */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while (!I2C_CheckEvent(CODEC_I2C, I2C_EVENT_MASTER_MODE_SELECT)) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /* Transmit the slave address and enable writing operation */ + I2C_Send7bitAddress(CODEC_I2C, CODEC_ADDRESS, I2C_Direction_Transmitter); + + /* Test on EV6 and clear it */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while (!I2C_CheckEvent(CODEC_I2C, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED)) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /* Transmit the first address for write operation */ + I2C_SendData(CODEC_I2C, RegisterAddr); + + /* Test on EV8 and clear it */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while (!I2C_CheckEvent(CODEC_I2C, I2C_EVENT_MASTER_BYTE_TRANSMITTING)) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /* Prepare the register value to be sent */ + I2C_SendData(CODEC_I2C, RegisterValue); + + /*!< Wait till all data have been physically transferred on the bus */ + CODECTimeout = CODEC_LONG_TIMEOUT; + while(!I2C_GetFlagStatus(CODEC_I2C, I2C_FLAG_BTF)) + { + if((CODECTimeout--) == 0) Codec_TIMEOUT_UserCallback(); + } + + /* End the configuration sequence */ + I2C_GenerateSTOP(CODEC_I2C, ENABLE); + +#ifdef VERIFY_WRITTENDATA + /* Verify that the data has been correctly written */ + result = (Codec_ReadRegister(RegisterAddr) == RegisterValue)? 0:1; +#endif /* VERIFY_WRITTENDATA */ + + /* Return the verifying value: 0 (Passed) or 1 (Failed) */ + return result; +} + +/** + * @brief Reads and returns the value of an audio codec register through the + * control interface (I2C). + * @param RegisterAddr: Address of the register to be read. + * @retval Value of the register to be read or dummy value if the communication + * fails. + */ +static uint32_t Codec_ReadRegister(uint8_t RegisterAddr) +{ + uint32_t result = 0; + + /*!< While the bus is busy */ + CODECTimeout = CODEC_LONG_TIMEOUT; + while(I2C_GetFlagStatus(CODEC_I2C, I2C_FLAG_BUSY)) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /* Start the config sequence */ + I2C_GenerateSTART(CODEC_I2C, ENABLE); + + /* Test on EV5 and clear it */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while (!I2C_CheckEvent(CODEC_I2C, I2C_EVENT_MASTER_MODE_SELECT)) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /* Transmit the slave address and enable writing operation */ + I2C_Send7bitAddress(CODEC_I2C, CODEC_ADDRESS, I2C_Direction_Transmitter); + + /* Test on EV6 and clear it */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while (!I2C_CheckEvent(CODEC_I2C, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED)) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /* Transmit the register address to be read */ + I2C_SendData(CODEC_I2C, RegisterAddr); + + /* Test on EV8 and clear it */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while (I2C_GetFlagStatus(CODEC_I2C, I2C_FLAG_BTF) == RESET) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /*!< Send START condition a second time */ + I2C_GenerateSTART(CODEC_I2C, ENABLE); + + /*!< Test on EV5 and clear it (cleared by reading SR1 then writing to DR) */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while(!I2C_CheckEvent(CODEC_I2C, I2C_EVENT_MASTER_MODE_SELECT)) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /*!< Send Codec address for read */ + I2C_Send7bitAddress(CODEC_I2C, CODEC_ADDRESS, I2C_Direction_Receiver); + + /* Wait on ADDR flag to be set (ADDR is still not cleared at this level */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while(I2C_GetFlagStatus(CODEC_I2C, I2C_FLAG_ADDR) == RESET) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /*!< Disable Acknowledgment */ + I2C_AcknowledgeConfig(CODEC_I2C, DISABLE); + + /* Clear ADDR register by reading SR1 then SR2 register (SR1 has already been read) */ + (void)CODEC_I2C->SR2; + + /*!< Send STOP Condition */ + I2C_GenerateSTOP(CODEC_I2C, ENABLE); + + /* Wait for the byte to be received */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while(I2C_GetFlagStatus(CODEC_I2C, I2C_FLAG_RXNE) == RESET) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /*!< Read the byte received from the Codec */ + result = I2C_ReceiveData(CODEC_I2C); + + /* Wait to make sure that STOP flag has been cleared */ + CODECTimeout = CODEC_FLAG_TIMEOUT; + while(CODEC_I2C->CR1 & I2C_CR1_STOP) + { + if((CODECTimeout--) == 0) return Codec_TIMEOUT_UserCallback(); + } + + /*!< Re-Enable Acknowledgment to be ready for another reception */ + I2C_AcknowledgeConfig(CODEC_I2C, ENABLE); + + /* Clear AF flag for next communication */ + I2C_ClearFlag(CODEC_I2C, I2C_FLAG_AF); + + /* Return the byte read from Codec */ + return result; +} + +/** + * @brief Initializes the Audio Codec control interface (I2C). + * @param None + * @retval None + */ +static void Codec_CtrlInterface_Init(void) +{ + I2C_InitTypeDef I2C_InitStructure; + + /* Enable the CODEC_I2C peripheral clock */ + RCC_APB1PeriphClockCmd(CODEC_I2C_CLK, ENABLE); + + /* CODEC_I2C peripheral configuration */ + I2C_DeInit(CODEC_I2C); + I2C_InitStructure.I2C_Mode = I2C_Mode_I2C; + I2C_InitStructure.I2C_DutyCycle = I2C_DutyCycle_2; + I2C_InitStructure.I2C_OwnAddress1 = 0x33; + I2C_InitStructure.I2C_Ack = I2C_Ack_Enable; + I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; + I2C_InitStructure.I2C_ClockSpeed = I2C_SPEED; + /* Enable the I2C peripheral */ + I2C_Cmd(CODEC_I2C, ENABLE); + I2C_Init(CODEC_I2C, &I2C_InitStructure); +} + +/** + * @brief Restore the Audio Codec control interface to its default state. + * This function doesn't de-initialize the I2C because the I2C peripheral + * may be used by other modules. + * @param None + * @retval None + */ +static void Codec_CtrlInterface_DeInit(void) +{ + /* Disable the I2C peripheral */ /* This step is not done here because + the I2C interface can be used by other modules */ + /* I2C_DeInit(CODEC_I2C); */ +} + +/** + * @brief Initializes the Audio Codec audio interface (I2S) + * @note This function assumes that the I2S input clock (through PLL_R in + * Devices RevA/Z and through dedicated PLLI2S_R in Devices RevB/Y) + * is already configured and ready to be used. + * @param AudioFreq: Audio frequency to be configured for the I2S peripheral. + * @retval None + */ +static void Codec_AudioInterface_Init(uint32_t AudioFreq) +{ + I2S_InitTypeDef I2S_InitStructure; + DAC_InitTypeDef DAC_InitStructure; + + /* Enable the CODEC_I2S peripheral clock */ + RCC_APB1PeriphClockCmd(CODEC_I2S_CLK, ENABLE); + + /* CODEC_I2S peripheral configuration */ + SPI_I2S_DeInit(CODEC_I2S); + I2S_InitStructure.I2S_AudioFreq = AudioFreq; + I2S_InitStructure.I2S_Standard = I2S_STANDARD; + I2S_InitStructure.I2S_DataFormat = I2S_DataFormat_16b; + I2S_InitStructure.I2S_CPOL = I2S_CPOL_Low; +#ifdef DAC_USE_I2S_DMA + if (CurrAudioInterface == AUDIO_INTERFACE_DAC) + { + I2S_InitStructure.I2S_Mode = I2S_Mode_MasterRx; + } + else + { +#else + I2S_InitStructure.I2S_Mode = I2S_Mode_MasterTx; +#endif +#ifdef DAC_USE_I2S_DMA + } +#endif /* DAC_USE_I2S_DMA */ +#ifdef CODEC_MCLK_ENABLED + I2S_InitStructure.I2S_MCLKOutput = I2S_MCLKOutput_Enable; +#elif defined(CODEC_MCLK_DISABLED) + I2S_InitStructure.I2S_MCLKOutput = I2S_MCLKOutput_Disable; +#else +#error "No selection for the MCLK output has been defined !" +#endif /* CODEC_MCLK_ENABLED */ + + /* Initialize the I2S peripheral with the structure above */ + I2S_Init(CODEC_I2S, &I2S_InitStructure); + + + /* Configure the DAC interface */ + if (CurrAudioInterface == AUDIO_INTERFACE_DAC) + { + /* DAC Periph clock enable */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE); + + /* DAC channel1 Configuration */ + DAC_InitStructure.DAC_Trigger = DAC_Trigger_None; + DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None; + DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable; + DAC_Init(AUDIO_DAC_CHANNEL, &DAC_InitStructure); + + /* Enable DAC Channel1 */ + DAC_Cmd(AUDIO_DAC_CHANNEL, ENABLE); + } + + /* The I2S peripheral will be enabled only in the EVAL_AUDIO_Play() function + or by user functions if DMA mode not enabled */ +} + +/** + * @brief Restores the Audio Codec audio interface to its default state. + * @param None + * @retval None + */ +static void Codec_AudioInterface_DeInit(void) +{ + /* Disable the CODEC_I2S peripheral (in case it hasn't already been disabled) */ + I2S_Cmd(CODEC_I2S, DISABLE); + + /* Deinitialize the CODEC_I2S peripheral */ + SPI_I2S_DeInit(CODEC_I2S); + + /* Disable the CODEC_I2S peripheral clock */ + RCC_APB1PeriphClockCmd(CODEC_I2S_CLK, DISABLE); +} + +/** + * @brief Initializes IOs used by the Audio Codec (on the control and audio + * interfaces). + * @param None + * @retval None + */ +static void Codec_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + + /* Enable Reset GPIO Clock */ + RCC_AHB1PeriphClockCmd(AUDIO_RESET_GPIO_CLK,ENABLE); + + /* Audio reset pin configuration -------------------------------------------------*/ + GPIO_InitStructure.GPIO_Pin = AUDIO_RESET_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(AUDIO_RESET_GPIO, &GPIO_InitStructure); + + /* Enable I2S and I2C GPIO clocks */ + RCC_AHB1PeriphClockCmd(CODEC_I2C_GPIO_CLOCK | CODEC_I2S_GPIO_CLOCK, ENABLE); + + /* CODEC_I2C SCL and SDA pins configuration -------------------------------------*/ + GPIO_InitStructure.GPIO_Pin = CODEC_I2C_SCL_PIN | CODEC_I2C_SDA_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_OType = GPIO_OType_OD; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(CODEC_I2C_GPIO, &GPIO_InitStructure); + /* Connect pins to I2C peripheral */ + GPIO_PinAFConfig(CODEC_I2C_GPIO, CODEC_I2S_SCL_PINSRC, CODEC_I2C_GPIO_AF); + GPIO_PinAFConfig(CODEC_I2C_GPIO, CODEC_I2S_SDA_PINSRC, CODEC_I2C_GPIO_AF); + + /* CODEC_I2S pins configuration: WS, SCK and SD pins -----------------------------*/ + GPIO_InitStructure.GPIO_Pin = CODEC_I2S_SCK_PIN | CODEC_I2S_SD_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(CODEC_I2S_GPIO, &GPIO_InitStructure); + + /* Connect pins to I2S peripheral */ + GPIO_PinAFConfig(CODEC_I2S_WS_GPIO, CODEC_I2S_WS_PINSRC, CODEC_I2S_GPIO_AF); + GPIO_PinAFConfig(CODEC_I2S_GPIO, CODEC_I2S_SCK_PINSRC, CODEC_I2S_GPIO_AF); + + if (CurrAudioInterface != AUDIO_INTERFACE_DAC) + { + GPIO_InitStructure.GPIO_Pin = CODEC_I2S_WS_PIN ; + GPIO_Init(CODEC_I2S_WS_GPIO, &GPIO_InitStructure); + GPIO_PinAFConfig(CODEC_I2S_GPIO, CODEC_I2S_SD_PINSRC, CODEC_I2S_GPIO_AF); + } + else + { + /* GPIOA clock enable (to be used with DAC) */ + RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE); + + /* DAC channel 1 & 2 (DAC_OUT1 = PA.4) configuration */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(GPIOA, &GPIO_InitStructure); + } + +#ifdef CODEC_MCLK_ENABLED + /* CODEC_I2S pins configuration: MCK pin */ + GPIO_InitStructure.GPIO_Pin = CODEC_I2S_MCK_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(CODEC_I2S_MCK_GPIO, &GPIO_InitStructure); + /* Connect pins to I2S peripheral */ + GPIO_PinAFConfig(CODEC_I2S_MCK_GPIO, CODEC_I2S_MCK_PINSRC, CODEC_I2S_GPIO_AF); +#endif /* CODEC_MCLK_ENABLED */ +} + +/** + * @brief Restores the IOs used by the Audio Codec interface to their default state. + * @param None + * @retval None + */ +static void Codec_GPIO_DeInit(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + + /* Deinitialize all the GPIOs used by the driver */ + GPIO_InitStructure.GPIO_Pin = CODEC_I2S_SCK_PIN | CODEC_I2S_SD_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(CODEC_I2S_GPIO, &GPIO_InitStructure); + + GPIO_InitStructure.GPIO_Pin = CODEC_I2S_WS_PIN ; + GPIO_Init(CODEC_I2S_WS_GPIO, &GPIO_InitStructure); + + /* Disconnect pins from I2S peripheral */ + GPIO_PinAFConfig(CODEC_I2S_WS_GPIO, CODEC_I2S_WS_PINSRC, 0x00); + GPIO_PinAFConfig(CODEC_I2S_GPIO, CODEC_I2S_SCK_PINSRC, 0x00); + GPIO_PinAFConfig(CODEC_I2S_GPIO, CODEC_I2S_SD_PINSRC, 0x00); + +#ifdef CODEC_MCLK_ENABLED + /* CODEC_I2S pins deinitialization: MCK pin */ + GPIO_InitStructure.GPIO_Pin = CODEC_I2S_MCK_PIN; + GPIO_Init(CODEC_I2S_MCK_GPIO, &GPIO_InitStructure); + /* Disconnect pins from I2S peripheral */ + GPIO_PinAFConfig(CODEC_I2S_MCK_GPIO, CODEC_I2S_MCK_PINSRC, CODEC_I2S_GPIO_AF); +#endif /* CODEC_MCLK_ENABLED */ +} + +/** + * @brief Inserts a delay time (not accurate timing). + * @param nCount: specifies the delay time length. + * @retval None + */ +static void Delay( __IO uint32_t nCount) +{ + for (; nCount != 0; nCount--); +} + +#ifdef USE_DEFAULT_TIMEOUT_CALLBACK +/** + * @brief Basic management of the timeout situation. + * @param None + * @retval None + */ +uint32_t Codec_TIMEOUT_UserCallback(void) +{ + /* Block communication and all processes */ + while (1) + { + } +} +#endif /* USE_DEFAULT_TIMEOUT_CALLBACK */ +/*======================== + + Audio MAL Interface Control Functions + + ==============================*/ + +/** + * @brief Initializes and prepares the Media to perform audio data transfer + * from Media to the I2S peripheral. + * @param None + * @retval None + */ +static void Audio_MAL_Init(void) +{ + +#ifdef I2S_INTERRUPT + NVIC_InitTypeDef NVIC_InitStructure; + + NVIC_InitStructure.NVIC_IRQChannel = SPI3_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelSubPriority =0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + SPI_I2S_ITConfig(SPI3, SPI_I2S_IT_TXE, ENABLE); + + I2S_Cmd(SPI3, ENABLE); +#else +#if defined(AUDIO_MAL_DMA_IT_TC_EN) || defined(AUDIO_MAL_DMA_IT_HT_EN) || defined(AUDIO_MAL_DMA_IT_TE_EN) + NVIC_InitTypeDef NVIC_InitStructure; +#endif + + if (CurrAudioInterface == AUDIO_INTERFACE_I2S) + { + /* Enable the DMA clock */ + RCC_AHB1PeriphClockCmd(AUDIO_MAL_DMA_CLOCK, ENABLE); + + /* Configure the DMA Stream */ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, DISABLE); + DMA_DeInit(AUDIO_MAL_DMA_STREAM); + /* Set the parameters to be configured */ + DMA_InitStructure.DMA_Channel = AUDIO_MAL_DMA_CHANNEL; + DMA_InitStructure.DMA_PeripheralBaseAddr = AUDIO_MAL_DMA_DREG; + DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)0; /* This field will be configured in play function */ + DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral; + DMA_InitStructure.DMA_BufferSize = (uint32_t)0xFFFE; /* This field will be configured in play function */ + DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; + DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; + DMA_InitStructure.DMA_PeripheralDataSize = AUDIO_MAL_DMA_PERIPH_DATA_SIZE; + DMA_InitStructure.DMA_MemoryDataSize = AUDIO_MAL_DMA_MEM_DATA_SIZE; +#ifdef AUDIO_MAL_MODE_NORMAL + DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; +#elif defined(AUDIO_MAL_MODE_CIRCULAR) + DMA_InitStructure.DMA_Mode = DMA_Mode_Circular; +#else +#error "AUDIO_MAL_MODE_NORMAL or AUDIO_MAL_MODE_CIRCULAR should be selected !!" +#endif /* AUDIO_MAL_MODE_NORMAL */ + DMA_InitStructure.DMA_Priority = DMA_Priority_High; + DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable; + DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_1QuarterFull; + DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single; + DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single; + DMA_Init(AUDIO_MAL_DMA_STREAM, &DMA_InitStructure); + + /* Enable the selected DMA interrupts (selected in "stm32f4_discovery_eval_audio_codec.h" defines) */ +#ifdef AUDIO_MAL_DMA_IT_TC_EN + DMA_ITConfig(AUDIO_MAL_DMA_STREAM, DMA_IT_TC, ENABLE); +#endif /* AUDIO_MAL_DMA_IT_TC_EN */ +#ifdef AUDIO_MAL_DMA_IT_HT_EN + DMA_ITConfig(AUDIO_MAL_DMA_STREAM, DMA_IT_HT, ENABLE); +#endif /* AUDIO_MAL_DMA_IT_HT_EN */ +#ifdef AUDIO_MAL_DMA_IT_TE_EN + DMA_ITConfig(AUDIO_MAL_DMA_STREAM, DMA_IT_TE | DMA_IT_FE | DMA_IT_DME, ENABLE); +#endif /* AUDIO_MAL_DMA_IT_TE_EN */ + +#if defined(AUDIO_MAL_DMA_IT_TC_EN) || defined(AUDIO_MAL_DMA_IT_HT_EN) || defined(AUDIO_MAL_DMA_IT_TE_EN) + /* I2S DMA IRQ Channel configuration */ + NVIC_InitStructure.NVIC_IRQChannel = AUDIO_MAL_DMA_IRQ; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = EVAL_AUDIO_IRQ_PREPRIO; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = EVAL_AUDIO_IRQ_SUBRIO; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +#endif + } + +#ifdef DAC_USE_I2S_DMA + else + { + /* Enable the DMA clock */ + RCC_AHB1PeriphClockCmd(AUDIO_MAL_DMA_CLOCK, ENABLE); + + /* Configure the DMA Stream */ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, DISABLE); + DMA_DeInit(AUDIO_MAL_DMA_STREAM); + /* Set the parameters to be configured */ + DMA_InitStructure.DMA_Channel = AUDIO_MAL_DMA_CHANNEL; + DMA_InitStructure.DMA_PeripheralBaseAddr = AUDIO_MAL_DMA_DREG; + DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)0; /* This field will be configured in play function */ + DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral; + DMA_InitStructure.DMA_BufferSize = (uint32_t)0xFFFE; /* This field will be configured in play function */ + DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; + DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; + DMA_InitStructure.DMA_PeripheralDataSize = AUDIO_MAL_DMA_PERIPH_DATA_SIZE; + DMA_InitStructure.DMA_MemoryDataSize = AUDIO_MAL_DMA_MEM_DATA_SIZE; +#ifdef AUDIO_MAL_MODE_NORMAL + DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; +#elif defined(AUDIO_MAL_MODE_CIRCULAR) + DMA_InitStructure.DMA_Mode = DMA_Mode_Circular; +#else +#error "AUDIO_MAL_MODE_NORMAL or AUDIO_MAL_MODE_CIRCULAR should be selected !!" +#endif /* AUDIO_MAL_MODE_NORMAL */ + DMA_InitStructure.DMA_Priority = DMA_Priority_High; + DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Enable; + DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full; + DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single; + DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single; + DMA_Init(AUDIO_MAL_DMA_STREAM, &DMA_InitStructure); + + /* Enable the selected DMA interrupts (selected in "stm32f4_discovery_eval_audio_codec.h" defines) */ +#ifdef AUDIO_MAL_DMA_IT_TC_EN + DMA_ITConfig(AUDIO_MAL_DMA_STREAM, DMA_IT_TC, ENABLE); +#endif /* AUDIO_MAL_DMA_IT_TC_EN */ +#ifdef AUDIO_MAL_DMA_IT_HT_EN + DMA_ITConfig(AUDIO_MAL_DMA_STREAM, DMA_IT_HT, ENABLE); +#endif /* AUDIO_MAL_DMA_IT_HT_EN */ +#ifdef AUDIO_MAL_DMA_IT_TE_EN + DMA_ITConfig(AUDIO_MAL_DMA_STREAM, DMA_IT_TE | DMA_IT_FE | DMA_IT_DME, ENABLE); +#endif /* AUDIO_MAL_DMA_IT_TE_EN */ + +#if defined(AUDIO_MAL_DMA_IT_TC_EN) || defined(AUDIO_MAL_DMA_IT_HT_EN) || defined(AUDIO_MAL_DMA_IT_TE_EN) + /* I2S DMA IRQ Channel configuration */ + NVIC_InitStructure.NVIC_IRQChannel = AUDIO_MAL_DMA_IRQ; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = EVAL_AUDIO_IRQ_PREPRIO; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = EVAL_AUDIO_IRQ_SUBRIO; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +#endif + } +#endif /* DAC_USE_I2S_DMA */ + + if (CurrAudioInterface == AUDIO_INTERFACE_I2S) + { + /* Enable the I2S DMA request */ + SPI_I2S_DMACmd(CODEC_I2S, SPI_I2S_DMAReq_Tx, ENABLE); + } + else + { + /* Configure the STM32 DAC to geenrate audio analog signal */ + DAC_Config(); + +#ifndef DAC_USE_I2S_DMA + /* Enable the I2S interrupt used to write into the DAC register */ + SPI_I2S_ITConfig(SPI3, SPI_I2S_IT_TXE, ENABLE); + + /* I2S DMA IRQ Channel configuration */ + NVIC_InitStructure.NVIC_IRQChannel = CODEC_I2S_IRQ; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = EVAL_AUDIO_IRQ_PREPRIO; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = EVAL_AUDIO_IRQ_SUBRIO; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +#else + /* Enable the I2S DMA request */ + SPI_I2S_DMACmd(CODEC_I2S, SPI_I2S_DMAReq_Rx, ENABLE); +#endif /* DAC_USE_I2S_DMA */ + } +#endif +} + +/** + * @brief Restore default state of the used Media. + * @param None + * @retval None + */ +static void Audio_MAL_DeInit(void) +{ +#if defined(AUDIO_MAL_DMA_IT_TC_EN) || defined(AUDIO_MAL_DMA_IT_HT_EN) || defined(AUDIO_MAL_DMA_IT_TE_EN) + NVIC_InitTypeDef NVIC_InitStructure; + + /* Deinitialize the NVIC interrupt for the I2S DMA Stream */ + NVIC_InitStructure.NVIC_IRQChannel = AUDIO_MAL_DMA_IRQ; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = EVAL_AUDIO_IRQ_PREPRIO; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = EVAL_AUDIO_IRQ_SUBRIO; + NVIC_InitStructure.NVIC_IRQChannelCmd = DISABLE; + NVIC_Init(&NVIC_InitStructure); +#endif + + /* Disable the DMA stream before the deinit */ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, DISABLE); + + /* Dinitialize the DMA Stream */ + DMA_DeInit(AUDIO_MAL_DMA_STREAM); + + /* + The DMA clock is not disabled, since it can be used by other streams + */ +} + +/** + * @brief Starts playing audio stream from the audio Media. + * @param None + * @retval None + */ +void Audio_MAL_Play(uint32_t Addr, uint32_t Size) +{ + if (CurrAudioInterface == AUDIO_INTERFACE_I2S) + { + /* Configure the buffer address and size */ + DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)Addr; + DMA_InitStructure.DMA_BufferSize = (uint32_t)Size/2; + + /* Configure the DMA Stream with the new parameters */ + DMA_Init(AUDIO_MAL_DMA_STREAM, &DMA_InitStructure); + + /* Enable the I2S DMA Stream*/ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, ENABLE); + } +#ifndef DAC_USE_I2S_DMA + else + { + /* Configure the buffer address and size */ + DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)Addr; + DMA_InitStructure.DMA_BufferSize = (uint32_t)Size; + + /* Configure the DMA Stream with the new parameters */ + DMA_Init(AUDIO_MAL_DMA_STREAM, &DMA_InitStructure); + + /* Enable the I2S DMA Stream*/ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, ENABLE); + } +#endif /* DAC_USE_I2S_DMA */ + + /* If the I2S peripheral is still not enabled, enable it */ + if ((CODEC_I2S->I2SCFGR & I2S_ENABLE_MASK) == 0) + { + I2S_Cmd(CODEC_I2S, ENABLE); + } +} + +/** + * @brief Pauses or Resumes the audio stream playing from the Media. + * @param Cmd: AUDIO_PAUSE (or 0) to pause, AUDIO_RESUME (or any value different + * from 0) to resume. + * @param Addr: Address from/at which the audio stream should resume/pause. + * @retval None + */ +static void Audio_MAL_PauseResume(uint32_t Cmd, uint32_t Addr) +{ + /* Pause the audio file playing */ + if (Cmd == AUDIO_PAUSE) + { + /* Disable the I2S DMA request */ + SPI_I2S_DMACmd(CODEC_I2S, SPI_I2S_DMAReq_Tx, DISABLE); + + /* Pause the I2S DMA Stream + Note. For the STM32F40x devices, the DMA implements a pause feature, + by disabling the stream, all configuration is preserved and data + transfer is paused till the next enable of the stream. + This feature is not available on STM32F40x devices. */ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, DISABLE); + } + else /* AUDIO_RESUME */ + { + /* Enable the I2S DMA request */ + SPI_I2S_DMACmd(CODEC_I2S, SPI_I2S_DMAReq_Tx, ENABLE); + + /* Resume the I2S DMA Stream + Note. For the STM32F40x devices, the DMA implements a pause feature, + by disabling the stream, all configuration is preserved and data + transfer is paused till the next enable of the stream. + This feature is not available on STM32F40x devices. */ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, ENABLE); + + /* If the I2S peripheral is still not enabled, enable it */ + if ((CODEC_I2S->I2SCFGR & I2S_ENABLE_MASK) == 0) + { + I2S_Cmd(CODEC_I2S, ENABLE); + } + } +} + +/** + * @brief Stops audio stream playing on the used Media. + * @param None + * @retval None + */ +static void Audio_MAL_Stop(void) +{ + /* Stop the Transfer on the I2S side: Stop and disable the DMA stream */ + DMA_Cmd(AUDIO_MAL_DMA_STREAM, DISABLE); + + /* Clear all the DMA flags for the next transfer */ + DMA_ClearFlag(AUDIO_MAL_DMA_STREAM, AUDIO_MAL_DMA_FLAG_TC |AUDIO_MAL_DMA_FLAG_HT | \ + AUDIO_MAL_DMA_FLAG_FE | AUDIO_MAL_DMA_FLAG_TE); + + /* + The I2S DMA requests are not disabled here. + */ + + /* In all modes, disable the I2S peripheral */ + I2S_Cmd(CODEC_I2S, DISABLE); +} + +/** + * @brief DAC Channel1 Configuration + * @param None + * @retval None + */ +void DAC_Config(void) +{ + DAC_InitTypeDef DAC_InitStructure; + GPIO_InitTypeDef GPIO_InitStructure; + + /* DMA1 clock and GPIOA clock enable (to be used with DAC) */ + RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA1 | RCC_AHB1Periph_GPIOA, ENABLE); + + /* DAC Periph clock enable */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE); + + /* DAC channel 1 & 2 (DAC_OUT1 = PA.4) configuration */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(GPIOA, &GPIO_InitStructure); + + /* DAC channel1 Configuration */ + DAC_InitStructure.DAC_Trigger = DAC_Trigger_None; + DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None; + DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable; + DAC_Init(AUDIO_DAC_CHANNEL, &DAC_InitStructure); + + /* Enable DAC Channel1 */ + DAC_Cmd(AUDIO_DAC_CHANNEL, ENABLE); +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_audio_codec.h b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_audio_codec.h new file mode 100644 index 00000000000..00e0a7f600d --- /dev/null +++ b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_audio_codec.h @@ -0,0 +1,306 @@ +/** + ****************************************************************************** + * @file stm32f4_discovery_audio_codec.h + * @author MCD Application Team + * @version V1.1.0 + * @date 28-October-2011 + * @brief This file contains all the functions prototypes for the + * stm32f4_discovery_audio_codec.c driver. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4_DISCOVERY_AUDIOCODEC_H +#define __STM32F4_DISCOVERY_AUDIOCODEC_H + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup Utilities + * @{ + */ + + +/** @addtogroup STM32F4_DISCOVERY + * @{ + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC + * @{ + */ + + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Exported_Types + * @{ + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Exported_Constants + * @{ + */ + +/*------------------------------------ + CONFIGURATION: Audio Codec Driver Configuration parameters + ----------------------------------------*/ +/* Audio Transfer mode (I2S Interrupt) */ +//#define I2S_INTERRUPT /* Uncomment this line to enable audio transfert with I2S interrupt*/ + +/* Audio Transfer mode (DMA, Interrupt or Polling) */ +#define AUDIO_MAL_MODE_NORMAL /* Uncomment this line to enable the audio + Transfer using DMA */ +/* #define AUDIO_MAL_MODE_CIRCULAR */ /* Uncomment this line to enable the audio + Transfer using DMA */ + +/* For the DMA modes select the interrupt that will be used */ +#define AUDIO_MAL_DMA_IT_TC_EN /* Uncomment this line to enable DMA Transfer Complete interrupt */ +/* #define AUDIO_MAL_DMA_IT_HT_EN */ /* Uncomment this line to enable DMA Half Transfer Complete interrupt */ +/* #define AUDIO_MAL_DMA_IT_TE_EN */ /* Uncomment this line to enable DMA Transfer Error interrupt */ + +/* Select the interrupt preemption priority and subpriority for the DMA interrupt */ +#define EVAL_AUDIO_IRQ_PREPRIO 0 /* Select the preemption priority level(0 is the highest) */ +#define EVAL_AUDIO_IRQ_SUBRIO 0 /* Select the sub-priority level (0 is the highest) */ + +/* Uncomment the following line to use the default Codec_TIMEOUT_UserCallback() + function implemented in stm32f4_discovery_audio_codec.c file. + Codec_TIMEOUT_UserCallback() function is called whenever a timeout condition + occurs during communication (waiting on an event that doesn't occur, bus + errors, busy devices ...). */ +/* #define USE_DEFAULT_TIMEOUT_CALLBACK */ + +/* Enable this define to use the I2S DMA for writing into DAC register */ +//#define DAC_USE_I2S_DMA +/*----------------------------------------------------------------------------*/ + +/*------------------------------------ + OPTIONAL Configuration defines parameters + ----------------------------------------*/ +/* I2C clock speed configuration (in Hz) + WARNING: + Make sure that this define is not already declared in other files (ie. + stm322xg_eval.h file). It can be used in parallel by other modules. */ +#ifndef I2C_SPEED + #define I2C_SPEED 100000 +#endif /* I2C_SPEED */ + +/* Uncomment defines below to select standard for audio communication between + Codec and I2S peripheral */ +#define I2S_STANDARD_PHILLIPS +/* #define I2S_STANDARD_MSB */ +/* #define I2S_STANDARD_LSB */ + +/* Uncomment the defines below to select if the Master clock mode should be + enabled or not */ +#define CODEC_MCLK_ENABLED +/* #deine CODEC_MCLK_DISABLED */ + +/* Uncomment this line to enable verifying data sent to codec after each write + operation */ +#define VERIFY_WRITTENDATA +/*----------------------------------------------------------------------------*/ + +/*----------------------------------- + Hardware Configuration defines parameters + -----------------------------------------*/ +/* Audio Reset Pin definition */ +#define AUDIO_RESET_GPIO_CLK RCC_AHB1Periph_GPIOD +#define AUDIO_RESET_PIN GPIO_Pin_4 +#define AUDIO_RESET_GPIO GPIOD + +/* I2S peripheral configuration defines */ +#define CODEC_I2S SPI3 +#define CODEC_I2S_CLK RCC_APB1Periph_SPI3 +#define CODEC_I2S_ADDRESS 0x40003C0C +#define CODEC_I2S_GPIO_AF GPIO_AF_SPI3 +#define CODEC_I2S_IRQ SPI3_IRQn +#define CODEC_I2S_GPIO_CLOCK (RCC_AHB1Periph_GPIOC | RCC_AHB1Periph_GPIOA) +#define CODEC_I2S_WS_PIN GPIO_Pin_4 +#define CODEC_I2S_SCK_PIN GPIO_Pin_10 +#define CODEC_I2S_SD_PIN GPIO_Pin_12 +#define CODEC_I2S_MCK_PIN GPIO_Pin_7 +#define CODEC_I2S_WS_PINSRC GPIO_PinSource4 +#define CODEC_I2S_SCK_PINSRC GPIO_PinSource10 +#define CODEC_I2S_SD_PINSRC GPIO_PinSource12 +#define CODEC_I2S_MCK_PINSRC GPIO_PinSource7 +#define CODEC_I2S_GPIO GPIOC +#define CODEC_I2S_WS_GPIO GPIOA +#define CODEC_I2S_MCK_GPIO GPIOC +#define Audio_I2S_IRQHandler SPI3_IRQHandler + + + #define AUDIO_MAL_DMA_PERIPH_DATA_SIZE DMA_PeripheralDataSize_HalfWord + #define AUDIO_MAL_DMA_MEM_DATA_SIZE DMA_MemoryDataSize_HalfWord + #define DMA_MAX_SZE 0xFFFF + + + #define DAC_DHR12L1_ADDRESS 0x4000740C + #define DAC_DHR12R1_ADDRESS 0x40007408 + #define DAC_DHR8R1_ADDRESS 0x40007410 + #define AUDIO_DAC_CHANNEL DAC_Channel_1 + + /* I2S DMA Stream definitions */ + #define AUDIO_I2S_DMA_CLOCK RCC_AHB1Periph_DMA1 + #define AUDIO_I2S_DMA_STREAM DMA1_Stream7 + #define AUDIO_I2S_DMA_DREG CODEC_I2S_ADDRESS + #define AUDIO_I2S_DMA_CHANNEL DMA_Channel_0 + #define AUDIO_I2S_DMA_IRQ DMA1_Stream7_IRQn + #define AUDIO_I2S_DMA_FLAG_TC DMA_FLAG_TCIF7 + #define AUDIO_I2S_DMA_FLAG_HT DMA_FLAG_HTIF7 + #define AUDIO_I2S_DMA_FLAG_FE DMA_FLAG_FEIF7 + #define AUDIO_I2S_DMA_FLAG_TE DMA_FLAG_TEIF7 + #define AUDIO_I2S_DMA_FLAG_DME DMA_FLAG_DMEIF7 + + #define Audio_MAL_I2S_IRQHandler DMA1_Stream7_IRQHandler + + + /* DAC DMA Stream definitions */ + #define AUDIO_DAC_DMA_CLOCK RCC_AHB1Periph_DMA1 + #define AUDIO_DAC_DMA_STREAM DMA1_Stream0 + #define AUDIO_DAC_DMA_DREG DAC_DHR12L1_ADDRESS + #define AUDIO_DAC_DMA_CHANNEL DMA_Channel_0 + #define AUDIO_DAC_DMA_IRQ DMA1_Stream0_IRQn + #define AUDIO_DAC_DMA_FLAG_TC DMA_FLAG_TCIF0 + #define AUDIO_DAC_DMA_FLAG_HT DMA_FLAG_HTIF0 + #define AUDIO_DAC_DMA_FLAG_FE DMA_FLAG_FEIF0 + #define AUDIO_DAC_DMA_FLAG_TE DMA_FLAG_TEIF0 + #define AUDIO_DAC_DMA_FLAG_DME DMA_FLAG_DMEIF0 + + #define Audio_MAL_DAC_IRQHandler DMA1_Stream0_IRQHandler + + +/* I2C peripheral configuration defines (control interface of the audio codec) */ +#define CODEC_I2C I2C1 +#define CODEC_I2C_CLK RCC_APB1Periph_I2C1 +#define CODEC_I2C_GPIO_CLOCK RCC_AHB1Periph_GPIOB +#define CODEC_I2C_GPIO_AF GPIO_AF_I2C1 +#define CODEC_I2C_GPIO GPIOB +#define CODEC_I2C_SCL_PIN GPIO_Pin_6 +#define CODEC_I2C_SDA_PIN GPIO_Pin_9 +#define CODEC_I2S_SCL_PINSRC GPIO_PinSource6 +#define CODEC_I2S_SDA_PINSRC GPIO_PinSource9 + +/* Maximum Timeout values for flags and events waiting loops. These timeouts are + not based on accurate values, they just guarantee that the application will + not remain stuck if the I2C communication is corrupted. + You may modify these timeout values depending on CPU frequency and application + conditions (interrupts routines ...). */ +#define CODEC_FLAG_TIMEOUT ((uint32_t)0x1000) +#define CODEC_LONG_TIMEOUT ((uint32_t)(300 * CODEC_FLAG_TIMEOUT)) +/*----------------------------------------------------------------------------*/ + +/*----------------------------------- + Audio Codec User defines + -----------------------------------------*/ +/* Audio interface : I2S or DAC */ +#define AUDIO_INTERFACE_I2S 1 +#define AUDIO_INTERFACE_DAC 2 + +/* Codec output DEVICE */ +#define OUTPUT_DEVICE_SPEAKER 1 +#define OUTPUT_DEVICE_HEADPHONE 2 +#define OUTPUT_DEVICE_BOTH 3 +#define OUTPUT_DEVICE_AUTO 4 + +/* Volume Levels values */ +#define DEFAULT_VOLMIN 0x00 +#define DEFAULT_VOLMAX 0xFF +#define DEFAULT_VOLSTEP 0x04 + +#define AUDIO_PAUSE 0 +#define AUDIO_RESUME 1 + +/* Codec POWER DOWN modes */ +#define CODEC_PDWN_HW 1 +#define CODEC_PDWN_SW 2 + +/* MUTE commands */ +#define AUDIO_MUTE_ON 1 +#define AUDIO_MUTE_OFF 0 +/*----------------------------------------------------------------------------*/ +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Exported_Macros + * @{ + */ +#define VOLUME_CONVERT(x) ((Volume > 100)? 100:((uint8_t)((Volume * 255) / 100))) +#define DMA_MAX(x) (((x) <= DMA_MAX_SZE)? (x):DMA_MAX_SZE) + +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_AUDIO_CODEC_Exported_Functions + * @{ + */ +void EVAL_AUDIO_SetAudioInterface(uint32_t Interface); +uint32_t EVAL_AUDIO_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq); +uint32_t EVAL_AUDIO_DeInit(void); +uint32_t EVAL_AUDIO_Play(uint16_t* pBuffer, uint32_t Size); +uint32_t EVAL_AUDIO_PauseResume(uint32_t Cmd); +uint32_t EVAL_AUDIO_Stop(uint32_t CodecPowerDown_Mode); +uint32_t EVAL_AUDIO_VolumeCtl(uint8_t Volume); +uint32_t EVAL_AUDIO_Mute(uint32_t Command); +void Audio_MAL_Play(uint32_t Addr, uint32_t Size); +void DAC_Config(void); + +/* User Callbacks: user has to implement these functions in his code if + they are needed. -----------------------------------------------------------*/ + +uint16_t EVAL_AUDIO_GetSampleCallBack(void); + +/* This function is called when the requested data has been completely transferred. + In Normal mode (when the define AUDIO_MAL_MODE_NORMAL is enabled) this function + is called at the end of the whole audio file. + In circular mode (when the define AUDIO_MAL_MODE_CIRCULAR is enabled) this + function is called at the end of the current buffer transmission. */ +void EVAL_AUDIO_TransferComplete_CallBack(uint32_t pBuffer, uint32_t Size); + +/* This function is called when half of the requested buffer has been transferred + This callback is useful in Circular mode only (when AUDIO_MAL_MODE_CIRCULAR + define is enabled)*/ +void EVAL_AUDIO_HalfTransfer_CallBack(uint32_t pBuffer, uint32_t Size); + +/* This function is called when an Interrupt due to transfer error on or peripheral + error occurs. */ +void EVAL_AUDIO_Error_CallBack(void* pData); + +/* Codec_TIMEOUT_UserCallback() function is called whenever a timeout condition + occurs during communication (waiting on an event that doesn't occur, bus + errors, busy devices ...) on the Codec control interface (I2C). + You can use the default timeout callback implementation by uncommenting the + define USE_DEFAULT_TIMEOUT_CALLBACK in stm32f4_discovery_audio_codec.h file. + Typically the user implementation of this callback should reset I2C peripheral + and re-initialize communication or in worst case reset all the application. */ +uint32_t Codec_TIMEOUT_UserCallback(void); + +#endif /* __STM32F4_DISCOVERY_AUDIOCODEC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_lis302dl.c b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_lis302dl.c new file mode 100644 index 00000000000..4051fdd9cae --- /dev/null +++ b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_lis302dl.c @@ -0,0 +1,502 @@ +/** + ****************************************************************************** + * @file stm32f4_discovery_lis302dl.c + * @author MCD Application Team + * @version V1.1.0 + * @date 28-October-2011 + * @brief This file provides a set of functions needed to manage the LIS302DL + * MEMS accelerometer available on STM32F4-Discovery Kit. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4_discovery_lis302dl.h" + +/** @addtogroup Utilities + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY_LIS302DL + * @{ + */ + + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Private_Defines + * @{ + */ +__IO uint32_t LIS302DLTimeout = LIS302DL_FLAG_TIMEOUT; + +/* Read/Write command */ +#define READWRITE_CMD ((uint8_t)0x80) +/* Multiple byte read/write command */ +#define MULTIPLEBYTE_CMD ((uint8_t)0x40) +/* Dummy Byte Send by the SPI Master device in order to generate the Clock to the Slave device */ +#define DUMMY_BYTE ((uint8_t)0x00) + +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Private_FunctionPrototypes + * @{ + */ +static uint8_t LIS302DL_SendByte(uint8_t byte); +static void LIS302DL_LowLevel_Init(void); +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Private_Functions + * @{ + */ + + +/** + * @brief Set LIS302DL Initialization. + * @param LIS302DL_Config_Struct: pointer to a LIS302DL_Config_TypeDef structure + * that contains the configuration setting for the LIS302DL. + * @retval None + */ +void LIS302DL_Init(LIS302DL_InitTypeDef *LIS302DL_InitStruct) +{ + uint8_t ctrl = 0x00; + + /* Configure the low level interface ---------------------------------------*/ + LIS302DL_LowLevel_Init(); + + /* Configure MEMS: data rate, power mode, full scale, self test and axes */ + ctrl = (uint8_t) (LIS302DL_InitStruct->Output_DataRate | LIS302DL_InitStruct->Power_Mode | \ + LIS302DL_InitStruct->Full_Scale | LIS302DL_InitStruct->Self_Test | \ + LIS302DL_InitStruct->Axes_Enable); + + /* Write value to MEMS CTRL_REG1 regsister */ + LIS302DL_Write(&ctrl, LIS302DL_CTRL_REG1_ADDR, 1); +} + +/** + * @brief Set LIS302DL Internal High Pass Filter configuration. + * @param LIS302DL_Filter_ConfigTypeDef: pointer to a LIS302DL_FilterConfig_TypeDef + * structure that contains the configuration setting for the LIS302DL Filter. + * @retval None + */ +void LIS302DL_FilterConfig(LIS302DL_FilterConfigTypeDef *LIS302DL_FilterConfigStruct) +{ + uint8_t ctrl = 0x00; + + /* Read CTRL_REG2 register */ + LIS302DL_Read(&ctrl, LIS302DL_CTRL_REG2_ADDR, 1); + + /* Clear high pass filter cut-off level, interrupt and data selection bits*/ + ctrl &= (uint8_t)~(LIS302DL_FILTEREDDATASELECTION_OUTPUTREGISTER | \ + LIS302DL_HIGHPASSFILTER_LEVEL_3 | \ + LIS302DL_HIGHPASSFILTERINTERRUPT_1_2); + /* Configure MEMS high pass filter cut-off level, interrupt and data selection bits */ + ctrl |= (uint8_t)(LIS302DL_FilterConfigStruct->HighPassFilter_Data_Selection | \ + LIS302DL_FilterConfigStruct->HighPassFilter_CutOff_Frequency | \ + LIS302DL_FilterConfigStruct->HighPassFilter_Interrupt); + + /* Write value to MEMS CTRL_REG2 register */ + LIS302DL_Write(&ctrl, LIS302DL_CTRL_REG2_ADDR, 1); +} + +/** + * @brief Set LIS302DL Interrupt configuration + * @param LIS302DL_InterruptConfig_TypeDef: pointer to a LIS302DL_InterruptConfig_TypeDef + * structure that contains the configuration setting for the LIS302DL Interrupt. + * @retval None + */ +void LIS302DL_InterruptConfig(LIS302DL_InterruptConfigTypeDef *LIS302DL_IntConfigStruct) +{ + uint8_t ctrl = 0x00; + + /* Read CLICK_CFG register */ + LIS302DL_Read(&ctrl, LIS302DL_CLICK_CFG_REG_ADDR, 1); + + /* Configure latch Interrupt request, click interrupts and double click interrupts */ + ctrl = (uint8_t)(LIS302DL_IntConfigStruct->Latch_Request| \ + LIS302DL_IntConfigStruct->SingleClick_Axes | \ + LIS302DL_IntConfigStruct->DoubleClick_Axes); + + /* Write value to MEMS CLICK_CFG register */ + LIS302DL_Write(&ctrl, LIS302DL_CLICK_CFG_REG_ADDR, 1); +} + +/** + * @brief Change the lowpower mode for LIS302DL + * @param LowPowerMode: new state for the lowpower mode. + * This parameter can be one of the following values: + * @arg LIS302DL_LOWPOWERMODE_POWERDOWN: Power down mode + * @arg LIS302DL_LOWPOWERMODE_ACTIVE: Active mode + * @retval None + */ +void LIS302DL_LowpowerCmd(uint8_t LowPowerMode) +{ + uint8_t tmpreg; + + /* Read CTRL_REG1 register */ + LIS302DL_Read(&tmpreg, LIS302DL_CTRL_REG1_ADDR, 1); + + /* Set new low power mode configuration */ + tmpreg &= (uint8_t)~LIS302DL_LOWPOWERMODE_ACTIVE; + tmpreg |= LowPowerMode; + + /* Write value to MEMS CTRL_REG1 regsister */ + LIS302DL_Write(&tmpreg, LIS302DL_CTRL_REG1_ADDR, 1); +} + +/** + * @brief Data Rate command + * @param DataRateValue: Data rate value + * This parameter can be one of the following values: + * @arg LIS302DL_DATARATE_100: 100 Hz output data rate + * @arg LIS302DL_DATARATE_400: 400 Hz output data rate + * @retval None + */ +void LIS302DL_DataRateCmd(uint8_t DataRateValue) +{ + uint8_t tmpreg; + + /* Read CTRL_REG1 register */ + LIS302DL_Read(&tmpreg, LIS302DL_CTRL_REG1_ADDR, 1); + + /* Set new Data rate configuration */ + tmpreg &= (uint8_t)~LIS302DL_DATARATE_400; + tmpreg |= DataRateValue; + + /* Write value to MEMS CTRL_REG1 regsister */ + LIS302DL_Write(&tmpreg, LIS302DL_CTRL_REG1_ADDR, 1); +} + +/** + * @brief Change the Full Scale of LIS302DL + * @param FS_value: new full scale value. + * This parameter can be one of the following values: + * @arg LIS302DL_FULLSCALE_2_3: +-2.3g + * @arg LIS302DL_FULLSCALE_9_2: +-9.2g + * @retval None + */ +void LIS302DL_FullScaleCmd(uint8_t FS_value) +{ + uint8_t tmpreg; + + /* Read CTRL_REG1 register */ + LIS302DL_Read(&tmpreg, LIS302DL_CTRL_REG1_ADDR, 1); + + /* Set new full scale configuration */ + tmpreg &= (uint8_t)~LIS302DL_FULLSCALE_9_2; + tmpreg |= FS_value; + + /* Write value to MEMS CTRL_REG1 regsister */ + LIS302DL_Write(&tmpreg, LIS302DL_CTRL_REG1_ADDR, 1); +} + +/** + * @brief Reboot memory content of LIS302DL + * @param None + * @retval None + */ +void LIS302DL_RebootCmd(void) +{ + uint8_t tmpreg; + /* Read CTRL_REG2 register */ + LIS302DL_Read(&tmpreg, LIS302DL_CTRL_REG2_ADDR, 1); + + /* Enable or Disable the reboot memory */ + tmpreg |= LIS302DL_BOOT_REBOOTMEMORY; + + /* Write value to MEMS CTRL_REG2 regsister */ + LIS302DL_Write(&tmpreg, LIS302DL_CTRL_REG2_ADDR, 1); +} + +/** + * @brief Writes one byte to the LIS302DL. + * @param pBuffer : pointer to the buffer containing the data to be written to the LIS302DL. + * @param WriteAddr : LIS302DL's internal address to write to. + * @param NumByteToWrite: Number of bytes to write. + * @retval None + */ +void LIS302DL_Write(uint8_t* pBuffer, uint8_t WriteAddr, uint16_t NumByteToWrite) +{ + /* Configure the MS bit: + - When 0, the address will remain unchanged in multiple read/write commands. + - When 1, the address will be auto incremented in multiple read/write commands. + */ + if(NumByteToWrite > 0x01) + { + WriteAddr |= (uint8_t)MULTIPLEBYTE_CMD; + } + /* Set chip select Low at the start of the transmission */ + LIS302DL_CS_LOW(); + + /* Send the Address of the indexed register */ + LIS302DL_SendByte(WriteAddr); + /* Send the data that will be written into the device (MSB First) */ + while(NumByteToWrite >= 0x01) + { + LIS302DL_SendByte(*pBuffer); + NumByteToWrite--; + pBuffer++; + } + + /* Set chip select High at the end of the transmission */ + LIS302DL_CS_HIGH(); +} + +/** + * @brief Reads a block of data from the LIS302DL. + * @param pBuffer : pointer to the buffer that receives the data read from the LIS302DL. + * @param ReadAddr : LIS302DL's internal address to read from. + * @param NumByteToRead : number of bytes to read from the LIS302DL. + * @retval None + */ +void LIS302DL_Read(uint8_t* pBuffer, uint8_t ReadAddr, uint16_t NumByteToRead) +{ + if(NumByteToRead > 0x01) + { + ReadAddr |= (uint8_t)(READWRITE_CMD | MULTIPLEBYTE_CMD); + } + else + { + ReadAddr |= (uint8_t)READWRITE_CMD; + } + /* Set chip select Low at the start of the transmission */ + LIS302DL_CS_LOW(); + + /* Send the Address of the indexed register */ + LIS302DL_SendByte(ReadAddr); + + /* Receive the data that will be read from the device (MSB First) */ + while(NumByteToRead > 0x00) + { + /* Send dummy byte (0x00) to generate the SPI clock to LIS302DL (Slave device) */ + *pBuffer = LIS302DL_SendByte(DUMMY_BYTE); + NumByteToRead--; + pBuffer++; + } + + /* Set chip select High at the end of the transmission */ + LIS302DL_CS_HIGH(); +} + +/** + * @brief Read LIS302DL output register, and calculate the acceleration + * ACC[mg]=SENSITIVITY* (out_h*256+out_l)/16 (12 bit rappresentation) + * @param s16 buffer to store data + * @retval None + */ +void LIS302DL_ReadACC(int32_t* out) +{ + uint8_t buffer[6]; + uint8_t crtl, i = 0x00; + + LIS302DL_Read(&crtl, LIS302DL_CTRL_REG1_ADDR, 1); + LIS302DL_Read(buffer, LIS302DL_OUT_X_ADDR, 6); + + switch(crtl & 0x20) + { + /* FS bit = 0 ==> Sensitivity typical value = 18milligals/digit*/ + case 0x00: + for(i=0; i<0x03; i++) + { + *out =(int32_t)(LIS302DL_SENSITIVITY_2_3G * (int8_t)buffer[2*i]); + out++; + } + break; + /* FS bit = 1 ==> Sensitivity typical value = 72milligals/digit*/ + case 0x20: + for(i=0; i<0x03; i++) + { + *out =(int32_t)(LIS302DL_SENSITIVITY_9_2G * (int8_t)buffer[2*i]); + out++; + } + break; + default: + break; + } + } + +/** + * @brief Initializes the low level interface used to drive the LIS302DL + * @param None + * @retval None + */ +static void LIS302DL_LowLevel_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + SPI_InitTypeDef SPI_InitStructure; + + /* Enable the SPI periph */ + RCC_APB2PeriphClockCmd(LIS302DL_SPI_CLK, ENABLE); + + /* Enable SCK, MOSI and MISO GPIO clocks */ + RCC_AHB1PeriphClockCmd(LIS302DL_SPI_SCK_GPIO_CLK | LIS302DL_SPI_MISO_GPIO_CLK | LIS302DL_SPI_MOSI_GPIO_CLK, ENABLE); + + /* Enable CS GPIO clock */ + RCC_AHB1PeriphClockCmd(LIS302DL_SPI_CS_GPIO_CLK, ENABLE); + + /* Enable INT1 GPIO clock */ + RCC_AHB1PeriphClockCmd(LIS302DL_SPI_INT1_GPIO_CLK, ENABLE); + + /* Enable INT2 GPIO clock */ + RCC_AHB1PeriphClockCmd(LIS302DL_SPI_INT2_GPIO_CLK, ENABLE); + + GPIO_PinAFConfig(LIS302DL_SPI_SCK_GPIO_PORT, LIS302DL_SPI_SCK_SOURCE, LIS302DL_SPI_SCK_AF); + GPIO_PinAFConfig(LIS302DL_SPI_MISO_GPIO_PORT, LIS302DL_SPI_MISO_SOURCE, LIS302DL_SPI_MISO_AF); + GPIO_PinAFConfig(LIS302DL_SPI_MOSI_GPIO_PORT, LIS302DL_SPI_MOSI_SOURCE, LIS302DL_SPI_MOSI_AF); + + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + + /* SPI SCK pin configuration */ + GPIO_InitStructure.GPIO_Pin = LIS302DL_SPI_SCK_PIN; + GPIO_Init(LIS302DL_SPI_SCK_GPIO_PORT, &GPIO_InitStructure); + + /* SPI MOSI pin configuration */ + GPIO_InitStructure.GPIO_Pin = LIS302DL_SPI_MOSI_PIN; + GPIO_Init(LIS302DL_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure); + + /* SPI MISO pin configuration */ + GPIO_InitStructure.GPIO_Pin = LIS302DL_SPI_MISO_PIN; + GPIO_Init(LIS302DL_SPI_MISO_GPIO_PORT, &GPIO_InitStructure); + + /* SPI configuration -------------------------------------------------------*/ + SPI_I2S_DeInit(LIS302DL_SPI); + SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; + SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; + SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; + SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; + SPI_InitStructure.SPI_NSS = SPI_NSS_Soft; + SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4; + SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; + SPI_InitStructure.SPI_CRCPolynomial = 7; + SPI_InitStructure.SPI_Mode = SPI_Mode_Master; + SPI_Init(LIS302DL_SPI, &SPI_InitStructure); + + /* Enable SPI1 */ + SPI_Cmd(LIS302DL_SPI, ENABLE); + + /* Configure GPIO PIN for Lis Chip select */ + GPIO_InitStructure.GPIO_Pin = LIS302DL_SPI_CS_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(LIS302DL_SPI_CS_GPIO_PORT, &GPIO_InitStructure); + + /* Deselect : Chip Select high */ + GPIO_SetBits(LIS302DL_SPI_CS_GPIO_PORT, LIS302DL_SPI_CS_PIN); + + /* Configure GPIO PINs to detect Interrupts */ + GPIO_InitStructure.GPIO_Pin = LIS302DL_SPI_INT1_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(LIS302DL_SPI_INT1_GPIO_PORT, &GPIO_InitStructure); + + GPIO_InitStructure.GPIO_Pin = LIS302DL_SPI_INT2_PIN; + GPIO_Init(LIS302DL_SPI_INT2_GPIO_PORT, &GPIO_InitStructure); +} + +/** + * @brief Sends a Byte through the SPI interface and return the Byte received + * from the SPI bus. + * @param Byte : Byte send. + * @retval The received byte value + */ +static uint8_t LIS302DL_SendByte(uint8_t byte) +{ + /* Loop while DR register in not emplty */ + LIS302DLTimeout = LIS302DL_FLAG_TIMEOUT; + while (SPI_I2S_GetFlagStatus(LIS302DL_SPI, SPI_I2S_FLAG_TXE) == RESET) + { + if((LIS302DLTimeout--) == 0) return LIS302DL_TIMEOUT_UserCallback(); + } + + /* Send a Byte through the SPI peripheral */ + SPI_I2S_SendData(LIS302DL_SPI, byte); + + /* Wait to receive a Byte */ + LIS302DLTimeout = LIS302DL_FLAG_TIMEOUT; + while (SPI_I2S_GetFlagStatus(LIS302DL_SPI, SPI_I2S_FLAG_RXNE) == RESET) + { + if((LIS302DLTimeout--) == 0) return LIS302DL_TIMEOUT_UserCallback(); + } + + /* Return the Byte read from the SPI bus */ + return (uint8_t)SPI_I2S_ReceiveData(LIS302DL_SPI); +} + +#ifdef USE_DEFAULT_TIMEOUT_CALLBACK +/** + * @brief Basic management of the timeout situation. + * @param None. + * @retval None. + */ +uint32_t LIS302DL_TIMEOUT_UserCallback(void) +{ + /* Block communication and all processes */ + while (1) + { + } +} +#endif /* USE_DEFAULT_TIMEOUT_CALLBACK */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_lis302dl.h b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_lis302dl.h new file mode 100644 index 00000000000..2628af08b18 --- /dev/null +++ b/car_llvmkot/src/lib/stm32f4d/stm32f4_discovery_lis302dl.h @@ -0,0 +1,772 @@ +/** + ****************************************************************************** + * @file stm32f4_discovery_lis302dl.h + * @author MCD Application Team + * @version V1.1.0 + * @date 28-October-2011 + * @brief This file contains all the functions prototypes for the stm32f4_discovery_lis302dl.c + * firmware driver. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4_DISCOVERY_LIS302DL_H +#define __STM32F4_DISCOVERY_LIS302DL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ + #include "stm32f4xx.h" + +/** @addtogroup Utilities + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY + * @{ + */ + +/** @addtogroup STM32F4_DISCOVERY_LIS302DL + * @{ + */ + + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Exported_Types + * @{ + */ + +/* LIS302DL struct */ +typedef struct +{ + uint8_t Power_Mode; /* Power-down/Active Mode */ + uint8_t Output_DataRate; /* OUT data rate 100 Hz / 400 Hz */ + uint8_t Axes_Enable; /* Axes enable */ + uint8_t Full_Scale; /* Full scale */ + uint8_t Self_Test; /* Self test */ +}LIS302DL_InitTypeDef; + +/* LIS302DL High Pass Filter struct */ +typedef struct +{ + uint8_t HighPassFilter_Data_Selection; /* Internal filter bypassed or data from internal filter send to output register*/ + uint8_t HighPassFilter_CutOff_Frequency; /* High pass filter cut-off frequency */ + uint8_t HighPassFilter_Interrupt; /* High pass filter enabled for Freefall/WakeUp #1 or #2 */ +}LIS302DL_FilterConfigTypeDef; + +/* LIS302DL Interrupt struct */ +typedef struct +{ + uint8_t Latch_Request; /* Latch interrupt request into CLICK_SRC register*/ + uint8_t SingleClick_Axes; /* Single Click Axes Interrupts */ + uint8_t DoubleClick_Axes; /* Double Click Axes Interrupts */ +}LIS302DL_InterruptConfigTypeDef; + +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Exported_Constants + * @{ + */ + +/* Uncomment the following line to use the default LIS302DL_TIMEOUT_UserCallback() + function implemented in stm32f4_discovery_lis302dl.c file. + LIS302DL_TIMEOUT_UserCallback() function is called whenever a timeout condition + occure during communication (waiting transmit data register empty flag(TXE) + or waiting receive data register is not empty flag (RXNE)). */ +/* #define USE_DEFAULT_TIMEOUT_CALLBACK */ + +/* Maximum Timeout values for flags waiting loops. These timeouts are not based + on accurate values, they just guarantee that the application will not remain + stuck if the SPI communication is corrupted. + You may modify these timeout values depending on CPU frequency and application + conditions (interrupts routines ...). */ +#define LIS302DL_FLAG_TIMEOUT ((uint32_t)0x1000) + +/** + * @brief LIS302DL SPI Interface pins + */ +#define LIS302DL_SPI SPI1 +#define LIS302DL_SPI_CLK RCC_APB2Periph_SPI1 + +#define LIS302DL_SPI_SCK_PIN GPIO_Pin_5 /* PA.05 */ +#define LIS302DL_SPI_SCK_GPIO_PORT GPIOA /* GPIOA */ +#define LIS302DL_SPI_SCK_GPIO_CLK RCC_AHB1Periph_GPIOA +#define LIS302DL_SPI_SCK_SOURCE GPIO_PinSource5 +#define LIS302DL_SPI_SCK_AF GPIO_AF_SPI1 + +#define LIS302DL_SPI_MISO_PIN GPIO_Pin_6 /* PA.6 */ +#define LIS302DL_SPI_MISO_GPIO_PORT GPIOA /* GPIOA */ +#define LIS302DL_SPI_MISO_GPIO_CLK RCC_AHB1Periph_GPIOA +#define LIS302DL_SPI_MISO_SOURCE GPIO_PinSource6 +#define LIS302DL_SPI_MISO_AF GPIO_AF_SPI1 + +#define LIS302DL_SPI_MOSI_PIN GPIO_Pin_7 /* PA.7 */ +#define LIS302DL_SPI_MOSI_GPIO_PORT GPIOA /* GPIOA */ +#define LIS302DL_SPI_MOSI_GPIO_CLK RCC_AHB1Periph_GPIOA +#define LIS302DL_SPI_MOSI_SOURCE GPIO_PinSource7 +#define LIS302DL_SPI_MOSI_AF GPIO_AF_SPI1 + +#define LIS302DL_SPI_CS_PIN GPIO_Pin_3 /* PE.03 */ +#define LIS302DL_SPI_CS_GPIO_PORT GPIOE /* GPIOE */ +#define LIS302DL_SPI_CS_GPIO_CLK RCC_AHB1Periph_GPIOE + +#define LIS302DL_SPI_INT1_PIN GPIO_Pin_0 /* PE.00 */ +#define LIS302DL_SPI_INT1_GPIO_PORT GPIOE /* GPIOE */ +#define LIS302DL_SPI_INT1_GPIO_CLK RCC_AHB1Periph_GPIOE +#define LIS302DL_SPI_INT1_EXTI_LINE EXTI_Line0 +#define LIS302DL_SPI_INT1_EXTI_PORT_SOURCE EXTI_PortSourceGPIOE +#define LIS302DL_SPI_INT1_EXTI_PIN_SOURCE EXTI_PinSource0 +#define LIS302DL_SPI_INT1_EXTI_IRQn EXTI0_IRQn + +#define LIS302DL_SPI_INT2_PIN GPIO_Pin_1 /* PE.01 */ +#define LIS302DL_SPI_INT2_GPIO_PORT GPIOE /* GPIOE */ +#define LIS302DL_SPI_INT2_GPIO_CLK RCC_AHB1Periph_GPIOE +#define LIS302DL_SPI_INT2_EXTI_LINE EXTI_Line1 +#define LIS302DL_SPI_INT2_EXTI_PORT_SOURCE EXTI_PortSourceGPIOE +#define LIS302DL_SPI_INT2_EXTI_PIN_SOURCE EXTI_PinSource1 +#define LIS302DL_SPI_INT2_EXTI_IRQn EXTI1_IRQn + + +/******************************************************************************/ +/*************************** START REGISTER MAPPING **************************/ +/******************************************************************************/ + +/******************************************************************************* +* WHO_AM_I Register: Device Identification Register +* Read only register +* Default value: 0x3B +*******************************************************************************/ +#define LIS302DL_WHO_AM_I_ADDR 0x0F + +/******************************************************************************* +* CTRL_REG1 Register: Control Register 1 +* Read Write register +* Default value: 0x07 +* 7 DR: Data Rate selection. +* 0 - 100 Hz output data rate +* 1 - 400 Hz output data rate +* 6 PD: Power Down control. +* 0 - power down mode +* 1 - active mode +* 5 FS: Full Scale selection. +* 0 - Typical measurement range 2.3 +* 1 - Typical measurement range 9.2 +* 4:3 STP-STM Self Test Enable: +* STP | STM | mode +* ---------------------------- +* 0 | 0 | Normal mode +* 0 | 1 | Self Test M +* 1 | 0 | Self Test P +* 2 Zen: Z axis enable. +* 0 - Z axis disabled +* 1- Z axis enabled +* 1 Yen: Y axis enable. +* 0 - Y axis disabled +* 1- Y axis enabled +* 0 Xen: X axis enable. +* 0 - X axis disabled +* 1- X axis enabled +********************************************************************************/ +#define LIS302DL_CTRL_REG1_ADDR 0x20 + +/******************************************************************************* +* CTRL_REG2 Regsiter: Control Register 2 +* Read Write register +* Default value: 0x00 +* 7 SIM: SPI Serial Interface Mode Selection. +* 0 - 4 wire interface +* 1 - 3 wire interface +* 6 BOOT: Reboot memory content +* 0 - normal mode +* 1 - reboot memory content +* 5 Reserved +* 4 FDS: Filtered data selection. +* 0 - internal filter bypassed +* 1 - data from internal filter sent to output register +* 3 HP FF_WU2: High pass filter enabled for FreeFall/WakeUp#2. +* 0 - filter bypassed +* 1 - filter enabled +* 2 HP FF_WU1: High pass filter enabled for FreeFall/WakeUp#1. +* 0 - filter bypassed +* 1 - filter enabled +* 1:0 HP coeff2-HP coeff1 High pass filter cut-off frequency (ft) configuration. +* ft= ODR[hz]/6*HP coeff +* HP coeff2 | HP coeff1 | HP coeff +* ------------------------------------------- +* 0 | 0 | 8 +* 0 | 1 | 16 +* 1 | 0 | 32 +* 1 | 1 | 64 +* HP coeff | ft[hz] | ft[hz] | +* |ODR 100Hz | ODR 400Hz | +* -------------------------------------------- +* 00 | 2 | 8 | +* 01 | 1 | 4 | +* 10 | 0.5 | 2 | +* 11 | 0.25 | 1 | +*******************************************************************************/ +#define LIS302DL_CTRL_REG2_ADDR 0x21 + +/******************************************************************************* +* CTRL_REG3 Register: Interrupt Control Register +* Read Write register +* Default value: 0x00 +* 7 IHL active: Interrupt active high/low. +* 0 - active high +* 1 - active low +* 6 PP_OD: push-pull/open-drain. +* 0 - push-pull +* 1 - open-drain +* 5:3 I2_CFG2 - I2_CFG0 Data signal on INT2 pad control bits +* 2:0 I1_CFG2 - I1_CFG0 Data signal on INT1 pad control bits +* I1(2)_CFG2 | I1(2)_CFG1 | I1(2)_CFG0 | INT1(2) Pad +* ---------------------------------------------------------- +* 0 | 0 | 0 | GND +* 0 | 0 | 1 | FreeFall/WakeUp#1 +* 0 | 1 | 0 | FreeFall/WakeUp#2 +* 0 | 1 | 1 | FreeFall/WakeUp#1 or FreeFall/WakeUp#2 +* 1 | 0 | 0 | Data ready +* 1 | 1 | 1 | Click interrupt +*******************************************************************************/ +#define LIS302DL_CTRL_REG3_ADDR 0x22 + +/******************************************************************************* +* HP_FILTER_RESET Register: Dummy register. Reading at this address zeroes +* instantaneously the content of the internal high pass filter. If the high pass +* filter is enabled all three axes are instantaneously set to 0g. +* This allows to overcome the settling time of the high pass filter. +* Read only register +* Default value: Dummy +*******************************************************************************/ +#define LIS302DL_HP_FILTER_RESET_REG_ADDR 0x23 + +/******************************************************************************* +* STATUS_REG Register: Status Register +* Default value: 0x00 +* 7 ZYXOR: X, Y and Z axis data overrun. +* 0: no overrun has occurred +* 1: new data has overwritten the previous one before it was read +* 6 ZOR: Z axis data overrun. +* 0: no overrun has occurred +* 1: new data for Z-axis has overwritten the previous one before it was read +* 5 yOR: y axis data overrun. +* 0: no overrun has occurred +* 1: new data for y-axis has overwritten the previous one before it was read +* 4 XOR: X axis data overrun. +* 0: no overrun has occurred +* 1: new data for X-axis has overwritten the previous one before it was read +* 3 ZYXDA: X, Y and Z axis new data available +* 0: a new set of data is not yet available +* 1: a new set of data is available +* 2 ZDA: Z axis new data available. +* 0: a new set of data is not yet available +* 1: a new data for Z axis is available +* 1 YDA: Y axis new data available +* 0: a new set of data is not yet available +* 1: a new data for Y axis is available +* 0 XDA: X axis new data available +* 0: a new set of data is not yet available +* 1: a new data for X axis is available +*******************************************************************************/ +#define LIS302DL_STATUS_REG_ADDR 0x27 + +/******************************************************************************* +* OUT_X Register: X-axis output Data +* Read only register +* Default value: output +* 7:0 XD7-XD0: X-axis output Data +*******************************************************************************/ +#define LIS302DL_OUT_X_ADDR 0x29 + +/******************************************************************************* +* OUT_Y Register: Y-axis output Data +* Read only register +* Default value: output +* 7:0 YD7-YD0: Y-axis output Data +*******************************************************************************/ +#define LIS302DL_OUT_Y_ADDR 0x2B + +/******************************************************************************* +* OUT_Z Register: Z-axis output Data +* Read only register +* Default value: output +* 7:0 ZD7-ZD0: Z-axis output Data +*******************************************************************************/ +#define LIS302DL_OUT_Z_ADDR 0x2D + +/******************************************************************************* +* FF_WW_CFG_1 Register: Configuration register for Interrupt 1 source. +* Read write register +* Default value: 0x00 +* 7 AOI: AND/OR combination of Interrupt events. +* 0: OR combination of interrupt events +* 1: AND combination of interrupt events +* 6 LIR: Latch/not latch interrupt request +* 0: interrupt request not latched +* 1: interrupt request latched +* 5 ZHIE: Enable interrupt generation on Z high event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value higher than preset threshold +* 4 ZLIE: Enable interrupt generation on Z low event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value lower than preset threshold +* 3 YHIE: Enable interrupt generation on Y high event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value higher than preset threshold +* 2 YLIE: Enable interrupt generation on Y low event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value lower than preset threshold +* 1 XHIE: Enable interrupt generation on X high event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value higher than preset threshold +* 0 XLIE: Enable interrupt generation on X low event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value lower than preset threshold +*******************************************************************************/ +#define LIS302DL_FF_WU_CFG1_REG_ADDR 0x30 + +/******************************************************************************* +* FF_WU_SRC_1 Register: Interrupt 1 source register. +* Reading at this address clears FF_WU_SRC_1 register and the FF, WU 1 interrupt +* and allow the refreshment of data in the FF_WU_SRC_1 register if the latched option +* was chosen. +* Read only register +* Default value: 0x00 +* 7 Reserved +* 6 IA: Interrupt active. +* 0: no interrupt has been generated +* 1: one or more interrupts have been generated +* 5 ZH: Z high. +* 0: no interrupt +* 1: ZH event has occurred +* 4 ZL: Z low. +* 0: no interrupt +* 1: ZL event has occurred +* 3 YH: Y high. +* 0: no interrupt +* 1: YH event has occurred +* 2 YL: Y low. +* 0: no interrupt +* 1: YL event has occurred +* 1 YH: X high. +* 0: no interrupt +* 1: XH event has occurred +* 0 YL: X low. +* 0: no interrupt +* 1: XL event has occurred +*******************************************************************************/ +#define LIS302DL_FF_WU_SRC1_REG_ADDR 0x31 + +/******************************************************************************* +* FF_WU_THS_1 Register: Threshold register +* Read Write register +* Default value: 0x00 +* 7 DCRM: Reset mode selection. +* 0 - counter resetted +* 1 - counter decremented +* 6 THS6-THS0: Free-fall/wake-up threshold value. +*******************************************************************************/ +#define LIS302DL_FF_WU_THS1_REG_ADDR 0x32 + +/******************************************************************************* +* FF_WU_DURATION_1 Register: duration Register +* Read Write register +* Default value: 0x00 +* 7:0 D7-D0 Duration value. (Duration steps and maximum values depend on the ODR chosen) + ******************************************************************************/ +#define LIS302DL_FF_WU_DURATION1_REG_ADDR 0x33 + +/******************************************************************************* +* FF_WW_CFG_2 Register: Configuration register for Interrupt 2 source. +* Read write register +* Default value: 0x00 +* 7 AOI: AND/OR combination of Interrupt events. +* 0: OR combination of interrupt events +* 1: AND combination of interrupt events +* 6 LIR: Latch/not latch interrupt request +* 0: interrupt request not latched +* 1: interrupt request latched +* 5 ZHIE: Enable interrupt generation on Z high event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value higher than preset threshold +* 4 ZLIE: Enable interrupt generation on Z low event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value lower than preset threshold +* 3 YHIE: Enable interrupt generation on Y high event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value higher than preset threshold +* 2 YLIE: Enable interrupt generation on Y low event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value lower than preset threshold +* 1 XHIE: Enable interrupt generation on X high event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value higher than preset threshold +* 0 XLIE: Enable interrupt generation on X low event. +* 0: disable interrupt request +* 1: enable interrupt request on measured accel. value lower than preset threshold +*******************************************************************************/ +#define LIS302DL_FF_WU_CFG2_REG_ADDR 0x34 + +/******************************************************************************* +* FF_WU_SRC_2 Register: Interrupt 2 source register. +* Reading at this address clears FF_WU_SRC_2 register and the FF, WU 2 interrupt +* and allow the refreshment of data in the FF_WU_SRC_2 register if the latched option +* was chosen. +* Read only register +* Default value: 0x00 +* 7 Reserved +* 6 IA: Interrupt active. +* 0: no interrupt has been generated +* 1: one or more interrupts have been generated +* 5 ZH: Z high. +* 0: no interrupt +* 1: ZH event has occurred +* 4 ZL: Z low. +* 0: no interrupt +* 1: ZL event has occurred +* 3 YH: Y high. +* 0: no interrupt +* 1: YH event has occurred +* 2 YL: Y low. +* 0: no interrupt +* 1: YL event has occurred +* 1 YH: X high. +* 0: no interrupt +* 1: XH event has occurred +* 0 YL: X low. +* 0: no interrupt +* 1: XL event has occurred +*******************************************************************************/ +#define LIS302DL_FF_WU_SRC2_REG_ADDR 0x35 + +/******************************************************************************* +* FF_WU_THS_2 Register: Threshold register +* Read Write register +* Default value: 0x00 +* 7 DCRM: Reset mode selection. +* 0 - counter resetted +* 1 - counter decremented +* 6 THS6-THS0: Free-fall/wake-up threshold value. +*******************************************************************************/ +#define LIS302DL_FF_WU_THS2_REG_ADDR 0x36 + +/******************************************************************************* +* FF_WU_DURATION_2 Register: duration Register +* Read Write register +* Default value: 0x00 +* 7:0 D7-D0 Duration value. (Duration steps and maximum values depend on the ODR chosen) + ******************************************************************************/ +#define LIS302DL_FF_WU_DURATION2_REG_ADDR 0x37 + +/****************************************************************************** +* CLICK_CFG Register: click Register +* Read Write register +* Default value: 0x00 +* 7 Reserved +* 6 LIR: Latch Interrupt request. +* 0: interrupt request not latched +* 1: interrupt request latched +* 5 Double_Z: Enable interrupt generation on double click event on Z axis. +* 0: disable interrupt request +* 1: enable interrupt request +* 4 Single_Z: Enable interrupt generation on single click event on Z axis. +* 0: disable interrupt request +* 1: enable interrupt request +* 3 Double_Y: Enable interrupt generation on double click event on Y axis. +* 0: disable interrupt request +* 1: enable interrupt request +* 2 Single_Y: Enable interrupt generation on single click event on Y axis. +* 0: disable interrupt request +* 1: enable interrupt request +* 1 Double_X: Enable interrupt generation on double click event on X axis. +* 0: disable interrupt request +* 1: enable interrupt request +* 0 Single_y: Enable interrupt generation on single click event on X axis. +* 0: disable interrupt request +* 1: enable interrupt request + ******************************************************************************/ +#define LIS302DL_CLICK_CFG_REG_ADDR 0x38 + +/****************************************************************************** +* CLICK_SRC Register: click status Register +* Read only register +* Default value: 0x00 +* 7 Reserved +* 6 IA: Interrupt active. +* 0: no interrupt has been generated +* 1: one or more interrupts have been generated +* 5 Double_Z: Double click on Z axis event. +* 0: no interrupt +* 1: Double Z event has occurred +* 4 Single_Z: Z low. +* 0: no interrupt +* 1: Single Z event has occurred +* 3 Double_Y: Y high. +* 0: no interrupt +* 1: Double Y event has occurred +* 2 Single_Y: Y low. +* 0: no interrupt +* 1: Single Y event has occurred +* 1 Double_X: X high. +* 0: no interrupt +* 1: Double X event has occurred +* 0 Single_X: X low. +* 0: no interrupt +* 1: Single X event has occurred +*******************************************************************************/ +#define LIS302DL_CLICK_SRC_REG_ADDR 0x39 + +/******************************************************************************* +* CLICK_THSY_X Register: Click threshold Y and X register +* Read Write register +* Default value: 0x00 +* 7:4 THSy3-THSy0: Click threshold on Y axis, step 0.5g +* 3:0 THSx3-THSx0: Click threshold on X axis, step 0.5g +*******************************************************************************/ +#define LIS302DL_CLICK_THSY_X_REG_ADDR 0x3B + +/******************************************************************************* +* CLICK_THSZ Register: Click threshold Z register +* Read Write register +* Default value: 0x00 +* 7:4 Reserved +* 3:0 THSz3-THSz0: Click threshold on Z axis, step 0.5g +*******************************************************************************/ +#define LIS302DL_CLICK_THSZ_REG_ADDR 0x3C + +/******************************************************************************* +* CLICK_TimeLimit Register: Time Limit register +* Read Write register +* Default value: 0x00 +* 7:0 Dur7-Dur0: Time Limit value, step 0.5g +*******************************************************************************/ +#define LIS302DL_CLICK_TIMELIMIT_REG_ADDR 0x3D + +/******************************************************************************* +* CLICK_Latency Register: Latency register +* Read Write register +* Default value: 0x00 +* 7:0 Lat7-Lat0: Latency value, step 1msec +*******************************************************************************/ +#define LIS302DL_CLICK_LATENCY_REG_ADDR 0x3E + +/******************************************************************************* +* CLICK_Window Register: Window register +* Read Write register +* Default value: 0x00 +* 7:0 Win7-Win0: Window value, step 1msec +*******************************************************************************/ +#define LIS302DL_CLICK_WINDOW_REG_ADDR 0x3F + +/******************************************************************************/ +/**************************** END REGISTER MAPPING ***************************/ +/******************************************************************************/ + +#define LIS302DL_SENSITIVITY_2_3G 18 /* 18 mg/digit*/ +#define LIS302DL_SENSITIVITY_9_2G 72 /* 72 mg/digit*/ + +/** @defgroup Data_Rate_selection + * @{ + */ +#define LIS302DL_DATARATE_100 ((uint8_t)0x00) +#define LIS302DL_DATARATE_400 ((uint8_t)0x80) +/** + * @} + */ + +/** @defgroup Power_Mode_selection + * @{ + */ +#define LIS302DL_LOWPOWERMODE_POWERDOWN ((uint8_t)0x00) +#define LIS302DL_LOWPOWERMODE_ACTIVE ((uint8_t)0x40) +/** + * @} + */ + +/** @defgroup Full_Scale_selection + * @{ + */ +#define LIS302DL_FULLSCALE_2_3 ((uint8_t)0x00) +#define LIS302DL_FULLSCALE_9_2 ((uint8_t)0x20) +/** + * @} + */ + +/** @defgroup Self_Test_selection + * @{ + */ +#define LIS302DL_SELFTEST_NORMAL ((uint8_t)0x00) +#define LIS302DL_SELFTEST_P ((uint8_t)0x10) +#define LIS302DL_SELFTEST_M ((uint8_t)0x08) +/** + * @} + */ + +/** @defgroup Direction_XYZ_selection + * @{ + */ +#define LIS302DL_X_ENABLE ((uint8_t)0x01) +#define LIS302DL_Y_ENABLE ((uint8_t)0x02) +#define LIS302DL_Z_ENABLE ((uint8_t)0x04) +#define LIS302DL_XYZ_ENABLE ((uint8_t)0x07) +/** + * @} + */ + + /** @defgroup SPI_Serial_Interface_Mode_selection + * @{ + */ +#define LIS302DL_SERIALINTERFACE_4WIRE ((uint8_t)0x00) +#define LIS302DL_SERIALINTERFACE_3WIRE ((uint8_t)0x80) +/** + * @} + */ + + /** @defgroup Boot_Mode_selection + * @{ + */ +#define LIS302DL_BOOT_NORMALMODE ((uint8_t)0x00) +#define LIS302DL_BOOT_REBOOTMEMORY ((uint8_t)0x40) +/** + * @} + */ + + /** @defgroup Filtered_Data_Selection_Mode_selection + * @{ + */ +#define LIS302DL_FILTEREDDATASELECTION_BYPASSED ((uint8_t)0x00) +#define LIS302DL_FILTEREDDATASELECTION_OUTPUTREGISTER ((uint8_t)0x20) +/** + * @} + */ + + /** @defgroup High_Pass_Filter_Interrupt_selection + * @{ + */ +#define LIS302DL_HIGHPASSFILTERINTERRUPT_OFF ((uint8_t)0x00) +#define LIS302DL_HIGHPASSFILTERINTERRUPT_1 ((uint8_t)0x04) +#define LIS302DL_HIGHPASSFILTERINTERRUPT_2 ((uint8_t)0x08) +#define LIS302DL_HIGHPASSFILTERINTERRUPT_1_2 ((uint8_t)0x0C) +/** + * @} + */ + + /** @defgroup High_Pass_Filter_selection + * @{ + */ +#define LIS302DL_HIGHPASSFILTER_LEVEL_0 ((uint8_t)0x00) +#define LIS302DL_HIGHPASSFILTER_LEVEL_1 ((uint8_t)0x01) +#define LIS302DL_HIGHPASSFILTER_LEVEL_2 ((uint8_t)0x02) +#define LIS302DL_HIGHPASSFILTER_LEVEL_3 ((uint8_t)0x03) +/** + * @} + */ + + +/** @defgroup latch_Interrupt_Request_selection + * @{ + */ +#define LIS302DL_INTERRUPTREQUEST_NOTLATCHED ((uint8_t)0x00) +#define LIS302DL_INTERRUPTREQUEST_LATCHED ((uint8_t)0x40) +/** + * @} + */ + +/** @defgroup Click_Interrupt_XYZ_selection + * @{ + */ +#define LIS302DL_CLICKINTERRUPT_XYZ_DISABLE ((uint8_t)0x00) +#define LIS302DL_CLICKINTERRUPT_X_ENABLE ((uint8_t)0x01) +#define LIS302DL_CLICKINTERRUPT_Y_ENABLE ((uint8_t)0x04) +#define LIS302DL_CLICKINTERRUPT_Z_ENABLE ((uint8_t)0x10) +#define LIS302DL_CLICKINTERRUPT_XYZ_ENABLE ((uint8_t)0x15) +/** + * @} + */ + +/** @defgroup Double_Click_Interrupt_XYZ_selection + * @{ + */ +#define LIS302DL_DOUBLECLICKINTERRUPT_XYZ_DISABLE ((uint8_t)0x00) +#define LIS302DL_DOUBLECLICKINTERRUPT_X_ENABLE ((uint8_t)0x02) +#define LIS302DL_DOUBLECLICKINTERRUPT_Y_ENABLE ((uint8_t)0x08) +#define LIS302DL_DOUBLECLICKINTERRUPT_Z_ENABLE ((uint8_t)0x20) +#define LIS302DL_DOUBLECLICKINTERRUPT_XYZ_ENABLE ((uint8_t)0x2A) +/** + * @} + */ +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Exported_Macros + * @{ + */ +#define LIS302DL_CS_LOW() GPIO_ResetBits(LIS302DL_SPI_CS_GPIO_PORT, LIS302DL_SPI_CS_PIN) +#define LIS302DL_CS_HIGH() GPIO_SetBits(LIS302DL_SPI_CS_GPIO_PORT, LIS302DL_SPI_CS_PIN) +/** + * @} + */ + +/** @defgroup STM32F4_DISCOVERY_LIS302DL_Exported_Functions + * @{ + */ +void LIS302DL_Init(LIS302DL_InitTypeDef *LIS302DL_InitStruct); +void LIS302DL_InterruptConfig(LIS302DL_InterruptConfigTypeDef *LIS302DL_InterruptConfigStruct); +void LIS302DL_FilterConfig(LIS302DL_FilterConfigTypeDef *LIS302DL_FilterConfigStruct); +void LIS302DL_LowpowerCmd(uint8_t LowPowerMode); +void LIS302DL_FullScaleCmd(uint8_t FS_value); +void LIS302DL_DataRateCmd(uint8_t DataRateValue); +void LIS302DL_RebootCmd(void); +void LIS302DL_ReadACC(int32_t* out); +void LIS302DL_Write(uint8_t* pBuffer, uint8_t WriteAddr, uint16_t NumByteToWrite); +void LIS302DL_Read(uint8_t* pBuffer, uint8_t ReadAddr, uint16_t NumByteToRead); + +/* USER Callbacks: This is function for which prototype only is declared in + MEMS accelerometre driver and that should be implemented into user applicaiton. */ +/* LIS302DL_TIMEOUT_UserCallback() function is called whenever a timeout condition + occure during communication (waiting transmit data register empty flag(TXE) + or waiting receive data register is not empty flag (RXNE)). + You can use the default timeout callback implementation by uncommenting the + define USE_DEFAULT_TIMEOUT_CALLBACK in stm32f4_discovery_lis302dl.h file. + Typically the user implementation of this callback should reset MEMS peripheral + and re-initialize communication or in worst case reset all the application. */ +uint32_t LIS302DL_TIMEOUT_UserCallback(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4_DISCOVERY_LIS302DL_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/main.c b/car_llvmkot/src/main.c new file mode 100644 index 00000000000..c157546a563 --- /dev/null +++ b/car_llvmkot/src/main.c @@ -0,0 +1,5 @@ + + +int main(void) +{ +} diff --git a/car_llvmkot/src/stm32_flash.ld b/car_llvmkot/src/stm32_flash.ld new file mode 100644 index 00000000000..9a10d57b3c1 --- /dev/null +++ b/car_llvmkot/src/stm32_flash.ld @@ -0,0 +1,177 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for STM32F407VG Device with +** 1024KByte FLASH, 192KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* + * _estack is the highest address of user mode stack + * (sp initial value, stack grows down). + * We have 192K RAM on our MCU and _estack should be 0x20030000. + * But our MCU maps only 128K SRAM at 0x20000000 after boot. + * We need to perform some memory remapping to use more. + * This isn't implemented yet. + */ +_estack = 0x20020000; /* end of 128K SRAM region */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/car_llvmkot/src/stm32f4xx_conf.h b/car_llvmkot/src/stm32f4xx_conf.h new file mode 100644 index 00000000000..abd159f6ba9 --- /dev/null +++ b/car_llvmkot/src/stm32f4xx_conf.h @@ -0,0 +1,94 @@ +/** + ****************************************************************************** + * @file IO_Toggle/stm32f4xx_conf.h + * @author MCD Application Team + * @version V1.0.0 + * @date 19-September-2011 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_CONF_H +#define __STM32F4xx_CONF_H + +#if defined (HSE_VALUE) +/* Redefine the HSE value; it's equal to 8 MHz on the STM32F4-DISCOVERY Kit */ + #undef HSE_VALUE + #define HSE_VALUE ((uint32_t)8000000) +#endif /* HSE_VALUE */ + +/* Includes ------------------------------------------------------------------*/ +/* Uncomment the line below to enable peripheral header file inclusion */ +#include "stm32f4xx_adc.h" +#include "stm32f4xx_can.h" +#include "stm32f4xx_crc.h" +#include "stm32f4xx_cryp.h" +#include "stm32f4xx_dac.h" +#include "stm32f4xx_dbgmcu.h" +#include "stm32f4xx_dcmi.h" +#include "stm32f4xx_dma.h" +#include "stm32f4xx_exti.h" +#include "stm32f4xx_flash.h" +#include "stm32f4xx_fsmc.h" +#include "stm32f4xx_hash.h" +#include "stm32f4xx_gpio.h" +#include "stm32f4xx_i2c.h" +#include "stm32f4xx_iwdg.h" +#include "stm32f4xx_pwr.h" +#include "stm32f4xx_rcc.h" +#include "stm32f4xx_rng.h" +#include "stm32f4xx_rtc.h" +#include "stm32f4xx_sdio.h" +#include "stm32f4xx_spi.h" +#include "stm32f4xx_syscfg.h" +#include "stm32f4xx_tim.h" +#include "stm32f4xx_usart.h" +#include "stm32f4xx_wwdg.h" +#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* If an external clock source is used, then the value of the following define + should be set to the value of the external clock source, else, if no external + clock is used, keep this define commented */ +/*#define I2S_EXTERNAL_CLOCK_VAL 12288000 */ /* Value of the external clock in Hz */ + + +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT + +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32F4xx_CONF_H */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/stm32f4xx_it.c b/car_llvmkot/src/stm32f4xx_it.c new file mode 100644 index 00000000000..ceac51ac46c --- /dev/null +++ b/car_llvmkot/src/stm32f4xx_it.c @@ -0,0 +1,167 @@ +/** + ****************************************************************************** + * @file IO_Toggle/stm32f4xx_it.c + * @author MCD Application Team + * @version V1.0.0 + * @date 19-September-2011 + * @brief Main Interrupt Service Routines. + * This file provides template for all exceptions handler and + * peripherals interrupt service routine. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_it.h" + +/** @addtogroup STM32F4_Discovery_Peripheral_Examples + * @{ + */ + +/** @addtogroup IO_Toggle + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************/ +/* Cortex-M4 Processor Exceptions Handlers */ +/******************************************************************************/ + +/** + * @brief This function handles NMI exception. + * @param None + * @retval None + */ +void NMI_Handler(void) +{ +} + +/** + * @brief This function handles Hard Fault exception. + * @param None + * @retval None + */ +void HardFault_Handler(void) +{ + /* Go to infinite loop when Hard Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles Memory Manage exception. + * @param None + * @retval None + */ +void MemManage_Handler(void) +{ + /* Go to infinite loop when Memory Manage exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles Bus Fault exception. + * @param None + * @retval None + */ +void BusFault_Handler(void) +{ + /* Go to infinite loop when Bus Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles Usage Fault exception. + * @param None + * @retval None + */ +void UsageFault_Handler(void) +{ + /* Go to infinite loop when Usage Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles SVCall exception. + * @param None + * @retval None + */ +void SVC_Handler(void) +{ +} + +/** + * @brief This function handles Debug Monitor exception. + * @param None + * @retval None + */ +void DebugMon_Handler(void) +{ +} + +/** + * @brief This function handles PendSVC exception. + * @param None + * @retval None + */ +void PendSV_Handler(void) +{ +} + +/** + * @brief This function handles SysTick Handler. + * @param None + * @retval None + */ +void SysTick_Handler(void) +{ +} + +/******************************************************************************/ +/* STM32F4xx Peripherals Interrupt Handlers */ +/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ +/* available peripheral interrupt handler's name please refer to the startup */ +/* file (startup_stm32f4xx.s). */ +/******************************************************************************/ + +/** + * @brief This function handles PPP interrupt request. + * @param None + * @retval None + */ +/*void PPP_IRQHandler(void) +{ +}*/ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/stm32f4xx_it.h b/car_llvmkot/src/stm32f4xx_it.h new file mode 100644 index 00000000000..74f17c9cceb --- /dev/null +++ b/car_llvmkot/src/stm32f4xx_it.h @@ -0,0 +1,54 @@ +/** + ****************************************************************************** + * @file GPIO/IOToggle/stm32f4xx_it.h + * @author MCD Application Team + * @version V1.0.0 + * @date 19-September-2011 + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

    © COPYRIGHT 2011 STMicroelectronics

    + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_IT_H +#define __STM32F4xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_IT_H */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/car_llvmkot/src/wait.h b/car_llvmkot/src/wait.h new file mode 100644 index 00000000000..227b37c9775 --- /dev/null +++ b/car_llvmkot/src/wait.h @@ -0,0 +1,6 @@ +#pragma once + +inline void wait(uint32_t loops) +{ + while(--loops); +}